blob: 7ebdc960942bf6aaefe7d3968b65047d06577bbf [file] [log] [blame]
Benjamin Tissoires9fb6bf02014-04-07 13:39:33 -04001/*
2 * Copyright (c) 2013 Andrew Duggan <aduggan@synaptics.com>
3 * Copyright (c) 2013 Synaptics Incorporated
4 * Copyright (c) 2014 Benjamin Tissoires <benjamin.tissoires@gmail.com>
5 * Copyright (c) 2014 Red Hat, Inc
6 *
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of the GNU General Public License as published by the Free
9 * Software Foundation; either version 2 of the License, or (at your option)
10 * any later version.
11 */
12
13#include <linux/kernel.h>
14#include <linux/hid.h>
15#include <linux/input.h>
16#include <linux/input/mt.h>
17#include <linux/module.h>
18#include <linux/pm.h>
19#include <linux/slab.h>
20#include <linux/wait.h>
21#include <linux/sched.h>
22#include "hid-ids.h"
23
24#define RMI_MOUSE_REPORT_ID 0x01 /* Mouse emulation Report */
25#define RMI_WRITE_REPORT_ID 0x09 /* Output Report */
26#define RMI_READ_ADDR_REPORT_ID 0x0a /* Output Report */
27#define RMI_READ_DATA_REPORT_ID 0x0b /* Input Report */
28#define RMI_ATTN_REPORT_ID 0x0c /* Input Report */
29#define RMI_SET_RMI_MODE_REPORT_ID 0x0f /* Feature Report */
30
31/* flags */
32#define RMI_READ_REQUEST_PENDING BIT(0)
33#define RMI_READ_DATA_PENDING BIT(1)
34#define RMI_STARTED BIT(2)
35
36enum rmi_mode_type {
37 RMI_MODE_OFF = 0,
38 RMI_MODE_ATTN_REPORTS = 1,
39 RMI_MODE_NO_PACKED_ATTN_REPORTS = 2,
40};
41
42struct rmi_function {
43 unsigned page; /* page of the function */
44 u16 query_base_addr; /* base address for queries */
45 u16 command_base_addr; /* base address for commands */
46 u16 control_base_addr; /* base address for controls */
47 u16 data_base_addr; /* base address for datas */
48 unsigned int interrupt_base; /* cross-function interrupt number
49 * (uniq in the device)*/
50 unsigned int interrupt_count; /* number of interrupts */
51 unsigned int report_size; /* size of a report */
52 unsigned long irq_mask; /* mask of the interrupts
53 * (to be applied against ATTN IRQ) */
54};
55
56/**
57 * struct rmi_data - stores information for hid communication
58 *
59 * @page_mutex: Locks current page to avoid changing pages in unexpected ways.
60 * @page: Keeps track of the current virtual page
61 *
62 * @wait: Used for waiting for read data
63 *
64 * @writeReport: output buffer when writing RMI registers
65 * @readReport: input buffer when reading RMI registers
66 *
67 * @input_report_size: size of an input report (advertised by HID)
68 * @output_report_size: size of an output report (advertised by HID)
69 *
70 * @flags: flags for the current device (started, reading, etc...)
71 *
72 * @f11: placeholder of internal RMI function F11 description
73 * @f30: placeholder of internal RMI function F30 description
74 *
75 * @max_fingers: maximum finger count reported by the device
76 * @max_x: maximum x value reported by the device
77 * @max_y: maximum y value reported by the device
78 *
79 * @gpio_led_count: count of GPIOs + LEDs reported by F30
80 * @button_count: actual physical buttons count
81 * @button_mask: button mask used to decode GPIO ATTN reports
82 * @button_state_mask: pull state of the buttons
83 *
84 * @input: pointer to the kernel input device
85 *
86 * @reset_work: worker which will be called in case of a mouse report
87 * @hdev: pointer to the struct hid_device
88 */
89struct rmi_data {
90 struct mutex page_mutex;
91 int page;
92
93 wait_queue_head_t wait;
94
95 u8 *writeReport;
96 u8 *readReport;
97
98 int input_report_size;
99 int output_report_size;
100
101 unsigned long flags;
102
103 struct rmi_function f11;
104 struct rmi_function f30;
105
106 unsigned int max_fingers;
107 unsigned int max_x;
108 unsigned int max_y;
109 unsigned int x_size_mm;
110 unsigned int y_size_mm;
111
112 unsigned int gpio_led_count;
113 unsigned int button_count;
114 unsigned long button_mask;
115 unsigned long button_state_mask;
116
117 struct input_dev *input;
118
119 struct work_struct reset_work;
120 struct hid_device *hdev;
121};
122
123#define RMI_PAGE(addr) (((addr) >> 8) & 0xff)
124
125static int rmi_write_report(struct hid_device *hdev, u8 *report, int len);
126
127/**
128 * rmi_set_page - Set RMI page
129 * @hdev: The pointer to the hid_device struct
130 * @page: The new page address.
131 *
132 * RMI devices have 16-bit addressing, but some of the physical
133 * implementations (like SMBus) only have 8-bit addressing. So RMI implements
134 * a page address at 0xff of every page so we can reliable page addresses
135 * every 256 registers.
136 *
137 * The page_mutex lock must be held when this function is entered.
138 *
139 * Returns zero on success, non-zero on failure.
140 */
141static int rmi_set_page(struct hid_device *hdev, u8 page)
142{
143 struct rmi_data *data = hid_get_drvdata(hdev);
144 int retval;
145
146 data->writeReport[0] = RMI_WRITE_REPORT_ID;
147 data->writeReport[1] = 1;
148 data->writeReport[2] = 0xFF;
149 data->writeReport[4] = page;
150
151 retval = rmi_write_report(hdev, data->writeReport,
152 data->output_report_size);
153 if (retval != data->output_report_size) {
154 dev_err(&hdev->dev,
155 "%s: set page failed: %d.", __func__, retval);
156 return retval;
157 }
158
159 data->page = page;
160 return 0;
161}
162
163static int rmi_set_mode(struct hid_device *hdev, u8 mode)
164{
165 int ret;
166 u8 txbuf[2] = {RMI_SET_RMI_MODE_REPORT_ID, mode};
167
168 ret = hid_hw_raw_request(hdev, RMI_SET_RMI_MODE_REPORT_ID, txbuf,
169 sizeof(txbuf), HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
170 if (ret < 0) {
171 dev_err(&hdev->dev, "unable to set rmi mode to %d (%d)\n", mode,
172 ret);
173 return ret;
174 }
175
176 return 0;
177}
178
179static int rmi_write_report(struct hid_device *hdev, u8 *report, int len)
180{
181 int ret;
182
183 ret = hid_hw_output_report(hdev, (void *)report, len);
184 if (ret < 0) {
185 dev_err(&hdev->dev, "failed to write hid report (%d)\n", ret);
186 return ret;
187 }
188
189 return ret;
190}
191
192static int rmi_read_block(struct hid_device *hdev, u16 addr, void *buf,
193 const int len)
194{
195 struct rmi_data *data = hid_get_drvdata(hdev);
196 int ret;
197 int bytes_read;
198 int bytes_needed;
199 int retries;
200 int read_input_count;
201
202 mutex_lock(&data->page_mutex);
203
204 if (RMI_PAGE(addr) != data->page) {
205 ret = rmi_set_page(hdev, RMI_PAGE(addr));
206 if (ret < 0)
207 goto exit;
208 }
209
210 for (retries = 5; retries > 0; retries--) {
211 data->writeReport[0] = RMI_READ_ADDR_REPORT_ID;
212 data->writeReport[1] = 0; /* old 1 byte read count */
213 data->writeReport[2] = addr & 0xFF;
214 data->writeReport[3] = (addr >> 8) & 0xFF;
215 data->writeReport[4] = len & 0xFF;
216 data->writeReport[5] = (len >> 8) & 0xFF;
217
218 set_bit(RMI_READ_REQUEST_PENDING, &data->flags);
219
220 ret = rmi_write_report(hdev, data->writeReport,
221 data->output_report_size);
222 if (ret != data->output_report_size) {
223 clear_bit(RMI_READ_REQUEST_PENDING, &data->flags);
224 dev_err(&hdev->dev,
225 "failed to write request output report (%d)\n",
226 ret);
227 goto exit;
228 }
229
230 bytes_read = 0;
231 bytes_needed = len;
232 while (bytes_read < len) {
233 if (!wait_event_timeout(data->wait,
234 test_bit(RMI_READ_DATA_PENDING, &data->flags),
235 msecs_to_jiffies(1000))) {
236 hid_warn(hdev, "%s: timeout elapsed\n",
237 __func__);
238 ret = -EAGAIN;
239 break;
240 }
241
242 read_input_count = data->readReport[1];
243 memcpy(buf + bytes_read, &data->readReport[2],
244 read_input_count < bytes_needed ?
245 read_input_count : bytes_needed);
246
247 bytes_read += read_input_count;
248 bytes_needed -= read_input_count;
249 clear_bit(RMI_READ_DATA_PENDING, &data->flags);
250 }
251
252 if (ret >= 0) {
253 ret = 0;
254 break;
255 }
256 }
257
258exit:
259 clear_bit(RMI_READ_REQUEST_PENDING, &data->flags);
260 mutex_unlock(&data->page_mutex);
261 return ret;
262}
263
264static inline int rmi_read(struct hid_device *hdev, u16 addr, void *buf)
265{
266 return rmi_read_block(hdev, addr, buf, 1);
267}
268
269static void rmi_f11_process_touch(struct rmi_data *hdata, int slot,
270 u8 finger_state, u8 *touch_data)
271{
272 int x, y, wx, wy;
273 int wide, major, minor;
274 int z;
275
276 input_mt_slot(hdata->input, slot);
277 input_mt_report_slot_state(hdata->input, MT_TOOL_FINGER,
278 finger_state == 0x01);
279 if (finger_state == 0x01) {
280 x = (touch_data[0] << 4) | (touch_data[2] & 0x07);
281 y = (touch_data[1] << 4) | (touch_data[2] >> 4);
282 wx = touch_data[3] & 0x07;
283 wy = touch_data[3] >> 4;
284 wide = (wx > wy);
285 major = max(wx, wy);
286 minor = min(wx, wy);
287 z = touch_data[4];
288
289 /* y is inverted */
290 y = hdata->max_y - y;
291
292 input_event(hdata->input, EV_ABS, ABS_MT_POSITION_X, x);
293 input_event(hdata->input, EV_ABS, ABS_MT_POSITION_Y, y);
294 input_event(hdata->input, EV_ABS, ABS_MT_ORIENTATION, wide);
295 input_event(hdata->input, EV_ABS, ABS_MT_PRESSURE, z);
296 input_event(hdata->input, EV_ABS, ABS_MT_TOUCH_MAJOR, major);
297 input_event(hdata->input, EV_ABS, ABS_MT_TOUCH_MINOR, minor);
298 }
299}
300
301static void rmi_reset_work(struct work_struct *work)
302{
303 struct rmi_data *hdata = container_of(work, struct rmi_data,
304 reset_work);
305
306 /* switch the device to RMI if we receive a generic mouse report */
307 rmi_set_mode(hdata->hdev, RMI_MODE_ATTN_REPORTS);
308}
309
310static inline int rmi_schedule_reset(struct hid_device *hdev)
311{
312 struct rmi_data *hdata = hid_get_drvdata(hdev);
313 return schedule_work(&hdata->reset_work);
314}
315
316static int rmi_f11_input_event(struct hid_device *hdev, u8 irq, u8 *data,
317 int size)
318{
319 struct rmi_data *hdata = hid_get_drvdata(hdev);
320 int offset;
321 int i;
322
323 if (size < hdata->f11.report_size)
324 return 0;
325
326 if (!(irq & hdata->f11.irq_mask))
327 return 0;
328
329 offset = (hdata->max_fingers >> 2) + 1;
330 for (i = 0; i < hdata->max_fingers; i++) {
331 int fs_byte_position = i >> 2;
332 int fs_bit_position = (i & 0x3) << 1;
333 int finger_state = (data[fs_byte_position] >> fs_bit_position) &
334 0x03;
335
336 rmi_f11_process_touch(hdata, i, finger_state,
337 &data[offset + 5 * i]);
338 }
339 input_mt_sync_frame(hdata->input);
340 input_sync(hdata->input);
341 return hdata->f11.report_size;
342}
343
344static int rmi_f30_input_event(struct hid_device *hdev, u8 irq, u8 *data,
345 int size)
346{
347 struct rmi_data *hdata = hid_get_drvdata(hdev);
348 int i;
349 int button = 0;
350 bool value;
351
352 if (!(irq & hdata->f30.irq_mask))
353 return 0;
354
355 for (i = 0; i < hdata->gpio_led_count; i++) {
356 if (test_bit(i, &hdata->button_mask)) {
357 value = (data[i / 8] >> (i & 0x07)) & BIT(0);
358 if (test_bit(i, &hdata->button_state_mask))
359 value = !value;
360 input_event(hdata->input, EV_KEY, BTN_LEFT + button++,
361 value);
362 }
363 }
364 return hdata->f30.report_size;
365}
366
367static int rmi_input_event(struct hid_device *hdev, u8 *data, int size)
368{
369 struct rmi_data *hdata = hid_get_drvdata(hdev);
370 unsigned long irq_mask = 0;
371 unsigned index = 2;
372
373 if (!(test_bit(RMI_STARTED, &hdata->flags)))
374 return 0;
375
376 irq_mask |= hdata->f11.irq_mask;
377 irq_mask |= hdata->f30.irq_mask;
378
379 if (data[1] & ~irq_mask)
380 hid_warn(hdev, "unknown intr source:%02lx %s:%d\n",
381 data[1] & ~irq_mask, __FILE__, __LINE__);
382
383 if (hdata->f11.interrupt_base < hdata->f30.interrupt_base) {
384 index += rmi_f11_input_event(hdev, data[1], &data[index],
385 size - index);
386 index += rmi_f30_input_event(hdev, data[1], &data[index],
387 size - index);
388 } else {
389 index += rmi_f30_input_event(hdev, data[1], &data[index],
390 size - index);
391 index += rmi_f11_input_event(hdev, data[1], &data[index],
392 size - index);
393 }
394
395 return 1;
396}
397
398static int rmi_read_data_event(struct hid_device *hdev, u8 *data, int size)
399{
400 struct rmi_data *hdata = hid_get_drvdata(hdev);
401
402 if (!test_bit(RMI_READ_REQUEST_PENDING, &hdata->flags)) {
403 hid_err(hdev, "no read request pending\n");
404 return 0;
405 }
406
407 memcpy(hdata->readReport, data, size < hdata->input_report_size ?
408 size : hdata->input_report_size);
409 set_bit(RMI_READ_DATA_PENDING, &hdata->flags);
410 wake_up(&hdata->wait);
411
412 return 1;
413}
414
415static int rmi_raw_event(struct hid_device *hdev,
416 struct hid_report *report, u8 *data, int size)
417{
418 switch (data[0]) {
419 case RMI_READ_DATA_REPORT_ID:
420 return rmi_read_data_event(hdev, data, size);
421 case RMI_ATTN_REPORT_ID:
422 return rmi_input_event(hdev, data, size);
423 case RMI_MOUSE_REPORT_ID:
424 rmi_schedule_reset(hdev);
425 break;
426 }
427
428 return 0;
429}
430
431static int rmi_post_reset(struct hid_device *hdev)
432{
433 return rmi_set_mode(hdev, RMI_MODE_ATTN_REPORTS);
434}
435
436static int rmi_post_resume(struct hid_device *hdev)
437{
438 return rmi_set_mode(hdev, RMI_MODE_ATTN_REPORTS);
439}
440
441#define RMI4_MAX_PAGE 0xff
442#define RMI4_PAGE_SIZE 0x0100
443
444#define PDT_START_SCAN_LOCATION 0x00e9
445#define PDT_END_SCAN_LOCATION 0x0005
446#define RMI4_END_OF_PDT(id) ((id) == 0x00 || (id) == 0xff)
447
448struct pdt_entry {
449 u8 query_base_addr:8;
450 u8 command_base_addr:8;
451 u8 control_base_addr:8;
452 u8 data_base_addr:8;
453 u8 interrupt_source_count:3;
454 u8 bits3and4:2;
455 u8 function_version:2;
456 u8 bit7:1;
457 u8 function_number:8;
458} __attribute__((__packed__));
459
460static inline unsigned long rmi_gen_mask(unsigned irq_base, unsigned irq_count)
461{
462 return GENMASK(irq_count + irq_base - 1, irq_base);
463}
464
465static void rmi_register_function(struct rmi_data *data,
466 struct pdt_entry *pdt_entry, int page, unsigned interrupt_count)
467{
468 struct rmi_function *f = NULL;
469 u16 page_base = page << 8;
470
471 switch (pdt_entry->function_number) {
472 case 0x11:
473 f = &data->f11;
474 break;
475 case 0x30:
476 f = &data->f30;
477 break;
478 }
479
480 if (f) {
481 f->page = page;
482 f->query_base_addr = page_base | pdt_entry->query_base_addr;
483 f->command_base_addr = page_base | pdt_entry->command_base_addr;
484 f->control_base_addr = page_base | pdt_entry->control_base_addr;
485 f->data_base_addr = page_base | pdt_entry->data_base_addr;
486 f->interrupt_base = interrupt_count;
487 f->interrupt_count = pdt_entry->interrupt_source_count;
488 f->irq_mask = rmi_gen_mask(f->interrupt_base,
489 f->interrupt_count);
490 }
491}
492
493static int rmi_scan_pdt(struct hid_device *hdev)
494{
495 struct rmi_data *data = hid_get_drvdata(hdev);
496 struct pdt_entry entry;
497 int page;
498 bool page_has_function;
499 int i;
500 int retval;
501 int interrupt = 0;
502 u16 page_start, pdt_start , pdt_end;
503
504 hid_info(hdev, "Scanning PDT...\n");
505
506 for (page = 0; (page <= RMI4_MAX_PAGE); page++) {
507 page_start = RMI4_PAGE_SIZE * page;
508 pdt_start = page_start + PDT_START_SCAN_LOCATION;
509 pdt_end = page_start + PDT_END_SCAN_LOCATION;
510
511 page_has_function = false;
512 for (i = pdt_start; i >= pdt_end; i -= sizeof(entry)) {
513 retval = rmi_read_block(hdev, i, &entry, sizeof(entry));
514 if (retval) {
515 hid_err(hdev,
516 "Read of PDT entry at %#06x failed.\n",
517 i);
518 goto error_exit;
519 }
520
521 if (RMI4_END_OF_PDT(entry.function_number))
522 break;
523
524 page_has_function = true;
525
526 hid_info(hdev, "Found F%02X on page %#04x\n",
527 entry.function_number, page);
528
529 rmi_register_function(data, &entry, page, interrupt);
530 interrupt += entry.interrupt_source_count;
531 }
532
533 if (!page_has_function)
534 break;
535 }
536
537 hid_info(hdev, "%s: Done with PDT scan.\n", __func__);
538 retval = 0;
539
540error_exit:
541 return retval;
542}
543
544static int rmi_populate_f11(struct hid_device *hdev)
545{
546 struct rmi_data *data = hid_get_drvdata(hdev);
547 u8 buf[20];
548 int ret;
Andrew Dugganf15475c2014-05-02 11:14:16 -0700549 bool has_query9;
550 bool has_query10;
551 bool has_query11;
Benjamin Tissoires9fb6bf02014-04-07 13:39:33 -0400552 bool has_query12;
553 bool has_physical_props;
554 unsigned x_size, y_size;
Andrew Dugganf15475c2014-05-02 11:14:16 -0700555 u16 query12_offset;
Benjamin Tissoires9fb6bf02014-04-07 13:39:33 -0400556
557 if (!data->f11.query_base_addr) {
558 hid_err(hdev, "No 2D sensor found, giving up.\n");
559 return -ENODEV;
560 }
561
562 /* query 0 contains some useful information */
563 ret = rmi_read(hdev, data->f11.query_base_addr, buf);
564 if (ret) {
565 hid_err(hdev, "can not get query 0: %d.\n", ret);
566 return ret;
567 }
Andrew Dugganf15475c2014-05-02 11:14:16 -0700568 has_query9 = !!(buf[0] & BIT(3));
569 has_query11 = !!(buf[0] & BIT(4));
Benjamin Tissoires9fb6bf02014-04-07 13:39:33 -0400570 has_query12 = !!(buf[0] & BIT(5));
571
572 /* query 1 to get the max number of fingers */
573 ret = rmi_read(hdev, data->f11.query_base_addr + 1, buf);
574 if (ret) {
575 hid_err(hdev, "can not get NumberOfFingers: %d.\n", ret);
576 return ret;
577 }
578 data->max_fingers = (buf[0] & 0x07) + 1;
579 if (data->max_fingers > 5)
580 data->max_fingers = 10;
581
582 data->f11.report_size = data->max_fingers * 5 +
583 DIV_ROUND_UP(data->max_fingers, 4);
584
585 if (!(buf[0] & BIT(4))) {
586 hid_err(hdev, "No absolute events, giving up.\n");
587 return -ENODEV;
588 }
589
Andrew Dugganf15475c2014-05-02 11:14:16 -0700590 /* query 8 to find out if query 10 exists */
591 ret = rmi_read(hdev, data->f11.query_base_addr + 8, buf);
592 if (ret) {
593 hid_err(hdev, "can not read gesture information: %d.\n", ret);
594 return ret;
595 }
596 has_query10 = !!(buf[0] & BIT(2));
597
Benjamin Tissoires9fb6bf02014-04-07 13:39:33 -0400598 /*
Andrew Dugganf15475c2014-05-02 11:14:16 -0700599 * At least 8 queries are guaranteed to be present in F11
600 * +1 for query12.
Benjamin Tissoires9fb6bf02014-04-07 13:39:33 -0400601 */
Andrew Dugganf15475c2014-05-02 11:14:16 -0700602 query12_offset = 9;
603
604 if (has_query9)
605 ++query12_offset;
606
607 if (has_query10)
608 ++query12_offset;
609
610 if (has_query11)
611 ++query12_offset;
612
613 /* query 12 to know if the physical properties are reported */
Benjamin Tissoires9fb6bf02014-04-07 13:39:33 -0400614 if (has_query12) {
Andrew Dugganf15475c2014-05-02 11:14:16 -0700615 ret = rmi_read(hdev, data->f11.query_base_addr
616 + query12_offset, buf);
Benjamin Tissoires9fb6bf02014-04-07 13:39:33 -0400617 if (ret) {
618 hid_err(hdev, "can not get query 12: %d.\n", ret);
619 return ret;
620 }
621 has_physical_props = !!(buf[0] & BIT(5));
622
623 if (has_physical_props) {
624 ret = rmi_read_block(hdev,
Andrew Dugganf15475c2014-05-02 11:14:16 -0700625 data->f11.query_base_addr
626 + query12_offset + 1, buf, 4);
Benjamin Tissoires9fb6bf02014-04-07 13:39:33 -0400627 if (ret) {
628 hid_err(hdev, "can not read query 15-18: %d.\n",
629 ret);
630 return ret;
631 }
632
633 x_size = buf[0] | (buf[1] << 8);
634 y_size = buf[2] | (buf[3] << 8);
635
636 data->x_size_mm = DIV_ROUND_CLOSEST(x_size, 10);
637 data->y_size_mm = DIV_ROUND_CLOSEST(y_size, 10);
638
639 hid_info(hdev, "%s: size in mm: %d x %d\n",
640 __func__, data->x_size_mm, data->y_size_mm);
641 }
642 }
643
Benjamin Tissoiresdcce5832014-04-24 18:26:38 -0400644 /*
645 * retrieve the ctrl registers
646 * the ctrl register has a size of 20 but a fw bug split it into 16 + 4,
647 * and there is no way to know if the first 20 bytes are here or not.
648 * We use only the first 10 bytes, so get only them.
649 */
650 ret = rmi_read_block(hdev, data->f11.control_base_addr, buf, 10);
Benjamin Tissoires9fb6bf02014-04-07 13:39:33 -0400651 if (ret) {
Benjamin Tissoiresdcce5832014-04-24 18:26:38 -0400652 hid_err(hdev, "can not read ctrl block of size 10: %d.\n", ret);
Benjamin Tissoires9fb6bf02014-04-07 13:39:33 -0400653 return ret;
654 }
655
656 data->max_x = buf[6] | (buf[7] << 8);
657 data->max_y = buf[8] | (buf[9] << 8);
658
659 return 0;
660}
661
662static int rmi_populate_f30(struct hid_device *hdev)
663{
664 struct rmi_data *data = hid_get_drvdata(hdev);
665 u8 buf[20];
666 int ret;
667 bool has_gpio, has_led;
668 unsigned bytes_per_ctrl;
669 u8 ctrl2_addr;
670 int ctrl2_3_length;
671 int i;
672
673 /* function F30 is for physical buttons */
674 if (!data->f30.query_base_addr) {
675 hid_err(hdev, "No GPIO/LEDs found, giving up.\n");
676 return -ENODEV;
677 }
678
679 ret = rmi_read_block(hdev, data->f30.query_base_addr, buf, 2);
680 if (ret) {
681 hid_err(hdev, "can not get F30 query registers: %d.\n", ret);
682 return ret;
683 }
684
685 has_gpio = !!(buf[0] & BIT(3));
686 has_led = !!(buf[0] & BIT(2));
687 data->gpio_led_count = buf[1] & 0x1f;
688
689 /* retrieve ctrl 2 & 3 registers */
690 bytes_per_ctrl = (data->gpio_led_count + 7) / 8;
691 /* Ctrl0 is present only if both has_gpio and has_led are set*/
692 ctrl2_addr = (has_gpio && has_led) ? bytes_per_ctrl : 0;
693 /* Ctrl1 is always be present */
694 ctrl2_addr += bytes_per_ctrl;
695 ctrl2_3_length = 2 * bytes_per_ctrl;
696
697 data->f30.report_size = bytes_per_ctrl;
698
699 ret = rmi_read_block(hdev, data->f30.control_base_addr + ctrl2_addr,
700 buf, ctrl2_3_length);
701 if (ret) {
702 hid_err(hdev, "can not read ctrl 2&3 block of size %d: %d.\n",
703 ctrl2_3_length, ret);
704 return ret;
705 }
706
707 for (i = 0; i < data->gpio_led_count; i++) {
708 int byte_position = i >> 3;
709 int bit_position = i & 0x07;
710 u8 dir_byte = buf[byte_position];
711 u8 data_byte = buf[byte_position + bytes_per_ctrl];
712 bool dir = (dir_byte >> bit_position) & BIT(0);
713 bool dat = (data_byte >> bit_position) & BIT(0);
714
715 if (dir == 0) {
716 /* input mode */
717 if (dat) {
718 /* actual buttons have pull up resistor */
719 data->button_count++;
720 set_bit(i, &data->button_mask);
721 set_bit(i, &data->button_state_mask);
722 }
723 }
724
725 }
726
727 return 0;
728}
729
730static int rmi_populate(struct hid_device *hdev)
731{
732 int ret;
733
734 ret = rmi_scan_pdt(hdev);
735 if (ret) {
736 hid_err(hdev, "PDT scan failed with code %d.\n", ret);
737 return ret;
738 }
739
740 ret = rmi_populate_f11(hdev);
741 if (ret) {
742 hid_err(hdev, "Error while initializing F11 (%d).\n", ret);
743 return ret;
744 }
745
746 ret = rmi_populate_f30(hdev);
747 if (ret)
748 hid_warn(hdev, "Error while initializing F30 (%d).\n", ret);
749
750 return 0;
751}
752
753static void rmi_input_configured(struct hid_device *hdev, struct hid_input *hi)
754{
755 struct rmi_data *data = hid_get_drvdata(hdev);
756 struct input_dev *input = hi->input;
757 int ret;
758 int res_x, res_y, i;
759
760 data->input = input;
761
762 hid_dbg(hdev, "Opening low level driver\n");
763 ret = hid_hw_open(hdev);
764 if (ret)
765 return;
766
767 /* Allow incoming hid reports */
768 hid_device_io_start(hdev);
769
770 ret = rmi_set_mode(hdev, RMI_MODE_ATTN_REPORTS);
771 if (ret < 0) {
772 dev_err(&hdev->dev, "failed to set rmi mode\n");
773 goto exit;
774 }
775
776 ret = rmi_set_page(hdev, 0);
777 if (ret < 0) {
778 dev_err(&hdev->dev, "failed to set page select to 0.\n");
779 goto exit;
780 }
781
782 ret = rmi_populate(hdev);
783 if (ret)
784 goto exit;
785
786 __set_bit(EV_ABS, input->evbit);
787 input_set_abs_params(input, ABS_MT_POSITION_X, 1, data->max_x, 0, 0);
788 input_set_abs_params(input, ABS_MT_POSITION_Y, 1, data->max_y, 0, 0);
789
Jiri Kosinab668fdc2014-05-13 21:17:29 +0200790 if (data->x_size_mm && data->y_size_mm) {
Benjamin Tissoires9fb6bf02014-04-07 13:39:33 -0400791 res_x = (data->max_x - 1) / data->x_size_mm;
Jiri Kosinab668fdc2014-05-13 21:17:29 +0200792 res_y = (data->max_y - 1) / data->y_size_mm;
Benjamin Tissoires9fb6bf02014-04-07 13:39:33 -0400793
794 input_abs_set_res(input, ABS_MT_POSITION_X, res_x);
795 input_abs_set_res(input, ABS_MT_POSITION_Y, res_y);
796 }
797
798 input_set_abs_params(input, ABS_MT_ORIENTATION, 0, 1, 0, 0);
799 input_set_abs_params(input, ABS_MT_PRESSURE, 0, 0xff, 0, 0);
800 input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 0x0f, 0, 0);
801 input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, 0x0f, 0, 0);
802
803 input_mt_init_slots(input, data->max_fingers, INPUT_MT_POINTER);
804
805 if (data->button_count) {
806 __set_bit(EV_KEY, input->evbit);
807 for (i = 0; i < data->button_count; i++)
808 __set_bit(BTN_LEFT + i, input->keybit);
809
810 if (data->button_count == 1)
811 __set_bit(INPUT_PROP_BUTTONPAD, input->propbit);
812 }
813
814 set_bit(RMI_STARTED, &data->flags);
815
816exit:
817 hid_device_io_stop(hdev);
818 hid_hw_close(hdev);
819}
820
821static int rmi_input_mapping(struct hid_device *hdev,
822 struct hid_input *hi, struct hid_field *field,
823 struct hid_usage *usage, unsigned long **bit, int *max)
824{
825 /* we want to make HID ignore the advertised HID collection */
826 return -1;
827}
828
829static int rmi_probe(struct hid_device *hdev, const struct hid_device_id *id)
830{
831 struct rmi_data *data = NULL;
832 int ret;
833 size_t alloc_size;
834
835 data = devm_kzalloc(&hdev->dev, sizeof(struct rmi_data), GFP_KERNEL);
836 if (!data)
837 return -ENOMEM;
838
839 INIT_WORK(&data->reset_work, rmi_reset_work);
840 data->hdev = hdev;
841
842 hid_set_drvdata(hdev, data);
843
844 hdev->quirks |= HID_QUIRK_NO_INIT_REPORTS;
845
846 ret = hid_parse(hdev);
847 if (ret) {
848 hid_err(hdev, "parse failed\n");
849 return ret;
850 }
851
852 data->input_report_size = (hdev->report_enum[HID_INPUT_REPORT]
853 .report_id_hash[RMI_ATTN_REPORT_ID]->size >> 3)
854 + 1 /* report id */;
855 data->output_report_size = (hdev->report_enum[HID_OUTPUT_REPORT]
856 .report_id_hash[RMI_WRITE_REPORT_ID]->size >> 3)
857 + 1 /* report id */;
858
859 alloc_size = data->output_report_size + data->input_report_size;
860
861 data->writeReport = devm_kzalloc(&hdev->dev, alloc_size, GFP_KERNEL);
862 if (!data->writeReport) {
863 ret = -ENOMEM;
864 return ret;
865 }
866
867 data->readReport = data->writeReport + data->output_report_size;
868
869 init_waitqueue_head(&data->wait);
870
871 mutex_init(&data->page_mutex);
872
873 ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
874 if (ret) {
875 hid_err(hdev, "hw start failed\n");
876 return ret;
877 }
878
879 if (!test_bit(RMI_STARTED, &data->flags)) {
880 hid_hw_stop(hdev);
881 return -EIO;
882 }
883
Benjamin Tissoires9fb6bf02014-04-07 13:39:33 -0400884 return 0;
885}
886
887static void rmi_remove(struct hid_device *hdev)
888{
889 struct rmi_data *hdata = hid_get_drvdata(hdev);
890
891 clear_bit(RMI_STARTED, &hdata->flags);
892
893 hid_hw_stop(hdev);
894}
895
896static const struct hid_device_id rmi_id[] = {
897 { HID_I2C_DEVICE(USB_VENDOR_ID_SYNAPTICS, HID_ANY_ID) },
898 { HID_USB_DEVICE(USB_VENDOR_ID_SYNAPTICS, HID_ANY_ID) },
899 { }
900};
901MODULE_DEVICE_TABLE(hid, rmi_id);
902
903static struct hid_driver rmi_driver = {
904 .name = "hid-rmi",
905 .id_table = rmi_id,
906 .probe = rmi_probe,
907 .remove = rmi_remove,
908 .raw_event = rmi_raw_event,
909 .input_mapping = rmi_input_mapping,
910 .input_configured = rmi_input_configured,
911#ifdef CONFIG_PM
912 .resume = rmi_post_resume,
913 .reset_resume = rmi_post_reset,
914#endif
915};
916
917module_hid_driver(rmi_driver);
918
919MODULE_AUTHOR("Andrew Duggan <aduggan@synaptics.com>");
920MODULE_DESCRIPTION("RMI HID driver");
921MODULE_LICENSE("GPL");