blob: ddc48ec1b800300d6496479c8e4d4a1cd5090102 [file] [log] [blame]
Greg Ungererfa6667f2009-07-06 12:00:09 +10001/***************************************************************************/
2
3/*
4 * nettel.c -- startup code support for the NETtel boards
5 *
6 * Copyright (C) 2009, Greg Ungerer (gerg@snapgear.com)
7 */
8
9/***************************************************************************/
10
11#include <linux/kernel.h>
12#include <linux/param.h>
13#include <linux/init.h>
14#include <linux/io.h>
15#include <linux/platform_device.h>
16#include <asm/coldfire.h>
17#include <asm/mcfsim.h>
18#include <asm/nettel.h>
19
20/***************************************************************************/
21
22/*
23 * Define the IO and interrupt resources of the 2 SMC9196 interfaces.
24 */
25#define NETTEL_SMC0_ADDR 0x30600300
26#define NETTEL_SMC0_IRQ 29
27
28#define NETTEL_SMC1_ADDR 0x30600000
29#define NETTEL_SMC1_IRQ 27
30
31/*
32 * We need some access into the SMC9196 registers. Define those registers
33 * we will need here (including the smc91x.h doesn't seem to give us these
34 * in a simple form).
35 */
36#define SMC91xx_BANKSELECT 14
37#define SMC91xx_BASEADDR 2
38#define SMC91xx_BASEMAC 4
39
40/***************************************************************************/
41
42static struct resource nettel_smc91x_0_resources[] = {
43 {
44 .start = NETTEL_SMC0_ADDR,
45 .end = NETTEL_SMC0_ADDR + 0x20,
46 .flags = IORESOURCE_MEM,
47 },
48 {
49 .start = NETTEL_SMC0_IRQ,
50 .end = NETTEL_SMC0_IRQ,
51 .flags = IORESOURCE_IRQ,
52 },
53};
54
55static struct resource nettel_smc91x_1_resources[] = {
56 {
57 .start = NETTEL_SMC1_ADDR,
58 .end = NETTEL_SMC1_ADDR + 0x20,
59 .flags = IORESOURCE_MEM,
60 },
61 {
62 .start = NETTEL_SMC1_IRQ,
63 .end = NETTEL_SMC1_IRQ,
64 .flags = IORESOURCE_IRQ,
65 },
66};
67
68static struct platform_device nettel_smc91x[] = {
69 {
70 .name = "smc91x",
71 .id = 0,
72 .num_resources = ARRAY_SIZE(nettel_smc91x_0_resources),
73 .resource = nettel_smc91x_0_resources,
74 },
75 {
76 .name = "smc91x",
77 .id = 1,
78 .num_resources = ARRAY_SIZE(nettel_smc91x_1_resources),
79 .resource = nettel_smc91x_1_resources,
80 },
81};
82
83static struct platform_device *nettel_devices[] __initdata = {
84 &nettel_smc91x[0],
85 &nettel_smc91x[1],
86};
87
88/***************************************************************************/
89
90static u8 nettel_macdefault[] __initdata = {
91 0x00, 0xd0, 0xcf, 0x00, 0x00, 0x01,
92};
93
94/*
95 * Set flash contained MAC address into SMC9196 core. Make sure the flash
96 * MAC address is sane, and not an empty flash. If no good use the Moreton
97 * Bay default MAC address instead.
98 */
99
100static void __init nettel_smc91x_setmac(unsigned int ioaddr, unsigned int flashaddr)
101{
102 u16 *macp;
103
104 macp = (u16 *) flashaddr;
105 if ((macp[0] == 0xffff) && (macp[1] == 0xffff) && (macp[2] == 0xffff))
106 macp = (u16 *) &nettel_macdefault[0];
107
108 writew(1, NETTEL_SMC0_ADDR + SMC91xx_BANKSELECT);
109 writew(macp[0], ioaddr + SMC91xx_BASEMAC);
110 writew(macp[1], ioaddr + SMC91xx_BASEMAC + 2);
111 writew(macp[2], ioaddr + SMC91xx_BASEMAC + 4);
112}
113
114/***************************************************************************/
115
116/*
117 * Re-map the address space of at least one of the SMC ethernet
118 * parts. Both parts power up decoding the same address, so we
119 * need to move one of them first, before doing anything else.
120 */
121
122static void __init nettel_smc91x_init(void)
123{
Greg Ungerer1419ea32012-09-14 15:36:02 +1000124 writew(0x00ec, MCFSIM_PADDR);
Greg Ungererfa6667f2009-07-06 12:00:09 +1000125 mcf_setppdata(0, 0x0080);
126 writew(1, NETTEL_SMC0_ADDR + SMC91xx_BANKSELECT);
127 writew(0x0067, NETTEL_SMC0_ADDR + SMC91xx_BASEADDR);
128 mcf_setppdata(0x0080, 0);
129
130 /* Set correct chip select timing for SMC9196 accesses */
Greg Ungerer1419ea32012-09-14 15:36:02 +1000131 writew(0x1180, MCFSIM_CSCR3);
Greg Ungererfa6667f2009-07-06 12:00:09 +1000132
133 /* Set the SMC interrupts to be auto-vectored */
134 mcf_autovector(NETTEL_SMC0_IRQ);
135 mcf_autovector(NETTEL_SMC1_IRQ);
136
137 /* Set MAC addresses from flash for both interfaces */
138 nettel_smc91x_setmac(NETTEL_SMC0_ADDR, 0xf0006000);
139 nettel_smc91x_setmac(NETTEL_SMC1_ADDR, 0xf0006006);
140}
141
142/***************************************************************************/
143
144static int __init init_nettel(void)
145{
146 nettel_smc91x_init();
147 platform_add_devices(nettel_devices, ARRAY_SIZE(nettel_devices));
148 return 0;
149}
150
151arch_initcall(init_nettel);
152
153/***************************************************************************/