Ondrej Zary | 5350c65 | 2012-02-10 18:59:17 +0100 | [diff] [blame] | 1 | /* |
| 2 | * i740fb - framebuffer driver for Intel740 |
| 3 | * Copyright (c) 2011 Ondrej Zary |
| 4 | * |
| 5 | * Based on old i740fb driver (c) 2001-2002 Andrey Ulanov <drey@rt.mipt.ru> |
| 6 | * which was partially based on: |
| 7 | * VGA 16-color framebuffer driver (c) 1999 Ben Pfaff <pfaffben@debian.org> |
| 8 | * and Petr Vandrovec <VANDROVE@vc.cvut.cz> |
| 9 | * i740 driver from XFree86 (c) 1998-1999 Precision Insight, Inc., Cedar Park, |
| 10 | * Texas. |
| 11 | * i740fb by Patrick LERDA, v0.9 |
| 12 | */ |
| 13 | |
| 14 | #include <linux/module.h> |
| 15 | #include <linux/kernel.h> |
| 16 | #include <linux/errno.h> |
| 17 | #include <linux/string.h> |
| 18 | #include <linux/mm.h> |
| 19 | #include <linux/slab.h> |
| 20 | #include <linux/delay.h> |
| 21 | #include <linux/fb.h> |
| 22 | #include <linux/init.h> |
| 23 | #include <linux/pci.h> |
| 24 | #include <linux/pci_ids.h> |
| 25 | #include <linux/i2c.h> |
| 26 | #include <linux/i2c-algo-bit.h> |
| 27 | #include <linux/console.h> |
| 28 | #include <video/vga.h> |
| 29 | |
| 30 | #ifdef CONFIG_MTRR |
| 31 | #include <asm/mtrr.h> |
| 32 | #endif |
| 33 | |
| 34 | #include "i740_reg.h" |
| 35 | |
Greg Kroah-Hartman | 48c68c4 | 2012-12-21 13:07:39 -0800 | [diff] [blame] | 36 | static char *mode_option; |
Ondrej Zary | 5350c65 | 2012-02-10 18:59:17 +0100 | [diff] [blame] | 37 | |
| 38 | #ifdef CONFIG_MTRR |
Greg Kroah-Hartman | 48c68c4 | 2012-12-21 13:07:39 -0800 | [diff] [blame] | 39 | static int mtrr = 1; |
Ondrej Zary | 5350c65 | 2012-02-10 18:59:17 +0100 | [diff] [blame] | 40 | #endif |
| 41 | |
| 42 | struct i740fb_par { |
| 43 | unsigned char __iomem *regs; |
| 44 | bool has_sgram; |
| 45 | #ifdef CONFIG_MTRR |
| 46 | int mtrr_reg; |
| 47 | #endif |
| 48 | bool ddc_registered; |
| 49 | struct i2c_adapter ddc_adapter; |
| 50 | struct i2c_algo_bit_data ddc_algo; |
| 51 | u32 pseudo_palette[16]; |
| 52 | struct mutex open_lock; |
| 53 | unsigned int ref_count; |
| 54 | |
| 55 | u8 crtc[VGA_CRT_C]; |
| 56 | u8 atc[VGA_ATT_C]; |
| 57 | u8 gdc[VGA_GFX_C]; |
| 58 | u8 seq[VGA_SEQ_C]; |
| 59 | u8 misc; |
| 60 | u8 vss; |
| 61 | |
| 62 | /* i740 specific registers */ |
| 63 | u8 display_cntl; |
| 64 | u8 pixelpipe_cfg0; |
| 65 | u8 pixelpipe_cfg1; |
| 66 | u8 pixelpipe_cfg2; |
| 67 | u8 video_clk2_m; |
| 68 | u8 video_clk2_n; |
| 69 | u8 video_clk2_mn_msbs; |
| 70 | u8 video_clk2_div_sel; |
| 71 | u8 pll_cntl; |
| 72 | u8 address_mapping; |
| 73 | u8 io_cntl; |
| 74 | u8 bitblt_cntl; |
| 75 | u8 ext_vert_total; |
| 76 | u8 ext_vert_disp_end; |
| 77 | u8 ext_vert_sync_start; |
| 78 | u8 ext_vert_blank_start; |
| 79 | u8 ext_horiz_total; |
| 80 | u8 ext_horiz_blank; |
| 81 | u8 ext_offset; |
| 82 | u8 interlace_cntl; |
| 83 | u32 lmi_fifo_watermark; |
| 84 | u8 ext_start_addr; |
| 85 | u8 ext_start_addr_hi; |
| 86 | }; |
| 87 | |
| 88 | #define DACSPEED8 203 |
| 89 | #define DACSPEED16 163 |
| 90 | #define DACSPEED24_SG 136 |
| 91 | #define DACSPEED24_SD 128 |
| 92 | #define DACSPEED32 86 |
| 93 | |
Greg Kroah-Hartman | 48c68c4 | 2012-12-21 13:07:39 -0800 | [diff] [blame] | 94 | static struct fb_fix_screeninfo i740fb_fix = { |
Ondrej Zary | 5350c65 | 2012-02-10 18:59:17 +0100 | [diff] [blame] | 95 | .id = "i740fb", |
| 96 | .type = FB_TYPE_PACKED_PIXELS, |
| 97 | .visual = FB_VISUAL_TRUECOLOR, |
| 98 | .xpanstep = 8, |
| 99 | .ypanstep = 1, |
| 100 | .accel = FB_ACCEL_NONE, |
| 101 | }; |
| 102 | |
| 103 | static inline void i740outb(struct i740fb_par *par, u16 port, u8 val) |
| 104 | { |
| 105 | vga_mm_w(par->regs, port, val); |
| 106 | } |
| 107 | static inline u8 i740inb(struct i740fb_par *par, u16 port) |
| 108 | { |
| 109 | return vga_mm_r(par->regs, port); |
| 110 | } |
| 111 | static inline void i740outreg(struct i740fb_par *par, u16 port, u8 reg, u8 val) |
| 112 | { |
| 113 | vga_mm_w_fast(par->regs, port, reg, val); |
| 114 | } |
| 115 | static inline u8 i740inreg(struct i740fb_par *par, u16 port, u8 reg) |
| 116 | { |
| 117 | vga_mm_w(par->regs, port, reg); |
| 118 | return vga_mm_r(par->regs, port+1); |
| 119 | } |
| 120 | static inline void i740outreg_mask(struct i740fb_par *par, u16 port, u8 reg, |
| 121 | u8 val, u8 mask) |
| 122 | { |
| 123 | vga_mm_w_fast(par->regs, port, reg, (val & mask) |
| 124 | | (i740inreg(par, port, reg) & ~mask)); |
| 125 | } |
| 126 | |
| 127 | #define REG_DDC_DRIVE 0x62 |
| 128 | #define REG_DDC_STATE 0x63 |
| 129 | #define DDC_SCL (1 << 3) |
| 130 | #define DDC_SDA (1 << 2) |
| 131 | |
| 132 | static void i740fb_ddc_setscl(void *data, int val) |
| 133 | { |
| 134 | struct i740fb_par *par = data; |
| 135 | |
| 136 | i740outreg_mask(par, XRX, REG_DDC_DRIVE, DDC_SCL, DDC_SCL); |
| 137 | i740outreg_mask(par, XRX, REG_DDC_STATE, val ? DDC_SCL : 0, DDC_SCL); |
| 138 | } |
| 139 | |
| 140 | static void i740fb_ddc_setsda(void *data, int val) |
| 141 | { |
| 142 | struct i740fb_par *par = data; |
| 143 | |
| 144 | i740outreg_mask(par, XRX, REG_DDC_DRIVE, DDC_SDA, DDC_SDA); |
| 145 | i740outreg_mask(par, XRX, REG_DDC_STATE, val ? DDC_SDA : 0, DDC_SDA); |
| 146 | } |
| 147 | |
| 148 | static int i740fb_ddc_getscl(void *data) |
| 149 | { |
| 150 | struct i740fb_par *par = data; |
| 151 | |
| 152 | i740outreg_mask(par, XRX, REG_DDC_DRIVE, 0, DDC_SCL); |
| 153 | |
| 154 | return !!(i740inreg(par, XRX, REG_DDC_STATE) & DDC_SCL); |
| 155 | } |
| 156 | |
| 157 | static int i740fb_ddc_getsda(void *data) |
| 158 | { |
| 159 | struct i740fb_par *par = data; |
| 160 | |
| 161 | i740outreg_mask(par, XRX, REG_DDC_DRIVE, 0, DDC_SDA); |
| 162 | |
| 163 | return !!(i740inreg(par, XRX, REG_DDC_STATE) & DDC_SDA); |
| 164 | } |
| 165 | |
Greg Kroah-Hartman | 48c68c4 | 2012-12-21 13:07:39 -0800 | [diff] [blame] | 166 | static int i740fb_setup_ddc_bus(struct fb_info *info) |
Ondrej Zary | 5350c65 | 2012-02-10 18:59:17 +0100 | [diff] [blame] | 167 | { |
| 168 | struct i740fb_par *par = info->par; |
| 169 | |
| 170 | strlcpy(par->ddc_adapter.name, info->fix.id, |
| 171 | sizeof(par->ddc_adapter.name)); |
| 172 | par->ddc_adapter.owner = THIS_MODULE; |
| 173 | par->ddc_adapter.class = I2C_CLASS_DDC; |
| 174 | par->ddc_adapter.algo_data = &par->ddc_algo; |
| 175 | par->ddc_adapter.dev.parent = info->device; |
| 176 | par->ddc_algo.setsda = i740fb_ddc_setsda; |
| 177 | par->ddc_algo.setscl = i740fb_ddc_setscl; |
| 178 | par->ddc_algo.getsda = i740fb_ddc_getsda; |
| 179 | par->ddc_algo.getscl = i740fb_ddc_getscl; |
| 180 | par->ddc_algo.udelay = 10; |
| 181 | par->ddc_algo.timeout = 20; |
| 182 | par->ddc_algo.data = par; |
| 183 | |
| 184 | i2c_set_adapdata(&par->ddc_adapter, par); |
| 185 | |
| 186 | return i2c_bit_add_bus(&par->ddc_adapter); |
| 187 | } |
| 188 | |
| 189 | static int i740fb_open(struct fb_info *info, int user) |
| 190 | { |
| 191 | struct i740fb_par *par = info->par; |
| 192 | |
| 193 | mutex_lock(&(par->open_lock)); |
| 194 | par->ref_count++; |
| 195 | mutex_unlock(&(par->open_lock)); |
| 196 | |
| 197 | return 0; |
| 198 | } |
| 199 | |
| 200 | static int i740fb_release(struct fb_info *info, int user) |
| 201 | { |
| 202 | struct i740fb_par *par = info->par; |
| 203 | |
| 204 | mutex_lock(&(par->open_lock)); |
| 205 | if (par->ref_count == 0) { |
Joe Perches | 31b6780 | 2013-09-19 18:35:55 -0700 | [diff] [blame] | 206 | fb_err(info, "release called with zero refcount\n"); |
Ondrej Zary | 5350c65 | 2012-02-10 18:59:17 +0100 | [diff] [blame] | 207 | mutex_unlock(&(par->open_lock)); |
| 208 | return -EINVAL; |
| 209 | } |
| 210 | |
| 211 | par->ref_count--; |
| 212 | mutex_unlock(&(par->open_lock)); |
| 213 | |
| 214 | return 0; |
| 215 | } |
| 216 | |
| 217 | static u32 i740_calc_fifo(struct i740fb_par *par, u32 freq, int bpp) |
| 218 | { |
| 219 | /* |
| 220 | * Would like to calculate these values automatically, but a generic |
| 221 | * algorithm does not seem possible. Note: These FIFO water mark |
| 222 | * values were tested on several cards and seem to eliminate the |
| 223 | * all of the snow and vertical banding, but fine adjustments will |
| 224 | * probably be required for other cards. |
| 225 | */ |
| 226 | |
| 227 | u32 wm; |
| 228 | |
| 229 | switch (bpp) { |
| 230 | case 8: |
| 231 | if (freq > 200) |
| 232 | wm = 0x18120000; |
| 233 | else if (freq > 175) |
| 234 | wm = 0x16110000; |
| 235 | else if (freq > 135) |
| 236 | wm = 0x120E0000; |
| 237 | else |
| 238 | wm = 0x100D0000; |
| 239 | break; |
| 240 | case 15: |
| 241 | case 16: |
| 242 | if (par->has_sgram) { |
| 243 | if (freq > 140) |
| 244 | wm = 0x2C1D0000; |
| 245 | else if (freq > 120) |
| 246 | wm = 0x2C180000; |
| 247 | else if (freq > 100) |
| 248 | wm = 0x24160000; |
| 249 | else if (freq > 90) |
| 250 | wm = 0x18120000; |
| 251 | else if (freq > 50) |
| 252 | wm = 0x16110000; |
| 253 | else if (freq > 32) |
| 254 | wm = 0x13100000; |
| 255 | else |
| 256 | wm = 0x120E0000; |
| 257 | } else { |
| 258 | if (freq > 160) |
| 259 | wm = 0x28200000; |
| 260 | else if (freq > 140) |
| 261 | wm = 0x2A1E0000; |
| 262 | else if (freq > 130) |
| 263 | wm = 0x2B1A0000; |
| 264 | else if (freq > 120) |
| 265 | wm = 0x2C180000; |
| 266 | else if (freq > 100) |
| 267 | wm = 0x24180000; |
| 268 | else if (freq > 90) |
| 269 | wm = 0x18120000; |
| 270 | else if (freq > 50) |
| 271 | wm = 0x16110000; |
| 272 | else if (freq > 32) |
| 273 | wm = 0x13100000; |
| 274 | else |
| 275 | wm = 0x120E0000; |
| 276 | } |
| 277 | break; |
| 278 | case 24: |
| 279 | if (par->has_sgram) { |
| 280 | if (freq > 130) |
| 281 | wm = 0x31200000; |
| 282 | else if (freq > 120) |
| 283 | wm = 0x2E200000; |
| 284 | else if (freq > 100) |
| 285 | wm = 0x2C1D0000; |
| 286 | else if (freq > 80) |
| 287 | wm = 0x25180000; |
| 288 | else if (freq > 64) |
| 289 | wm = 0x24160000; |
| 290 | else if (freq > 49) |
| 291 | wm = 0x18120000; |
| 292 | else if (freq > 32) |
| 293 | wm = 0x16110000; |
| 294 | else |
| 295 | wm = 0x13100000; |
| 296 | } else { |
| 297 | if (freq > 120) |
| 298 | wm = 0x311F0000; |
| 299 | else if (freq > 100) |
| 300 | wm = 0x2C1D0000; |
| 301 | else if (freq > 80) |
| 302 | wm = 0x25180000; |
| 303 | else if (freq > 64) |
| 304 | wm = 0x24160000; |
| 305 | else if (freq > 49) |
| 306 | wm = 0x18120000; |
| 307 | else if (freq > 32) |
| 308 | wm = 0x16110000; |
| 309 | else |
| 310 | wm = 0x13100000; |
| 311 | } |
| 312 | break; |
| 313 | case 32: |
| 314 | if (par->has_sgram) { |
| 315 | if (freq > 80) |
| 316 | wm = 0x2A200000; |
| 317 | else if (freq > 60) |
| 318 | wm = 0x281A0000; |
| 319 | else if (freq > 49) |
| 320 | wm = 0x25180000; |
| 321 | else if (freq > 32) |
| 322 | wm = 0x18120000; |
| 323 | else |
| 324 | wm = 0x16110000; |
| 325 | } else { |
| 326 | if (freq > 80) |
| 327 | wm = 0x29200000; |
| 328 | else if (freq > 60) |
| 329 | wm = 0x281A0000; |
| 330 | else if (freq > 49) |
| 331 | wm = 0x25180000; |
| 332 | else if (freq > 32) |
| 333 | wm = 0x18120000; |
| 334 | else |
| 335 | wm = 0x16110000; |
| 336 | } |
| 337 | break; |
| 338 | } |
| 339 | |
| 340 | return wm; |
| 341 | } |
| 342 | |
| 343 | /* clock calculation from i740fb by Patrick LERDA */ |
| 344 | |
| 345 | #define I740_RFREQ 1000000 |
| 346 | #define TARGET_MAX_N 30 |
| 347 | #define I740_FFIX (1 << 8) |
| 348 | #define I740_RFREQ_FIX (I740_RFREQ / I740_FFIX) |
| 349 | #define I740_REF_FREQ (6667 * I740_FFIX / 100) /* 66.67 MHz */ |
| 350 | #define I740_MAX_VCO_FREQ (450 * I740_FFIX) /* 450 MHz */ |
| 351 | |
| 352 | static void i740_calc_vclk(u32 freq, struct i740fb_par *par) |
| 353 | { |
| 354 | const u32 err_max = freq / (200 * I740_RFREQ / I740_FFIX); |
| 355 | const u32 err_target = freq / (1000 * I740_RFREQ / I740_FFIX); |
| 356 | u32 err_best = 512 * I740_FFIX; |
| 357 | u32 f_err, f_vco; |
| 358 | int m_best = 0, n_best = 0, p_best = 0, d_best = 0; |
| 359 | int m, n; |
| 360 | |
| 361 | p_best = min(15, ilog2(I740_MAX_VCO_FREQ / (freq / I740_RFREQ_FIX))); |
| 362 | d_best = 0; |
| 363 | f_vco = (freq * (1 << p_best)) / I740_RFREQ_FIX; |
| 364 | freq = freq / I740_RFREQ_FIX; |
| 365 | |
| 366 | n = 2; |
| 367 | do { |
| 368 | n++; |
| 369 | m = ((f_vco * n) / I740_REF_FREQ + 2) / 4; |
| 370 | |
| 371 | if (m < 3) |
| 372 | m = 3; |
| 373 | |
| 374 | { |
| 375 | u32 f_out = (((m * I740_REF_FREQ * (4 << 2 * d_best)) |
| 376 | / n) + ((1 << p_best) / 2)) / (1 << p_best); |
| 377 | |
| 378 | f_err = (freq - f_out); |
| 379 | |
| 380 | if (abs(f_err) < err_max) { |
| 381 | m_best = m; |
| 382 | n_best = n; |
| 383 | err_best = f_err; |
| 384 | } |
| 385 | } |
| 386 | } while ((abs(f_err) >= err_target) && |
| 387 | ((n <= TARGET_MAX_N) || (abs(err_best) > err_max))); |
| 388 | |
| 389 | if (abs(f_err) < err_target) { |
| 390 | m_best = m; |
| 391 | n_best = n; |
| 392 | } |
| 393 | |
| 394 | par->video_clk2_m = (m_best - 2) & 0xFF; |
| 395 | par->video_clk2_n = (n_best - 2) & 0xFF; |
| 396 | par->video_clk2_mn_msbs = ((((n_best - 2) >> 4) & VCO_N_MSBS) |
| 397 | | (((m_best - 2) >> 8) & VCO_M_MSBS)); |
| 398 | par->video_clk2_div_sel = |
| 399 | ((p_best << 4) | (d_best ? 4 : 0) | REF_DIV_1); |
| 400 | } |
| 401 | |
| 402 | static int i740fb_decode_var(const struct fb_var_screeninfo *var, |
| 403 | struct i740fb_par *par, struct fb_info *info) |
| 404 | { |
| 405 | /* |
| 406 | * Get the video params out of 'var'. |
| 407 | * If a value doesn't fit, round it up, if it's too big, return -EINVAL. |
| 408 | */ |
| 409 | |
| 410 | u32 xres, right, hslen, left, xtotal; |
| 411 | u32 yres, lower, vslen, upper, ytotal; |
| 412 | u32 vxres, xoffset, vyres, yoffset; |
| 413 | u32 bpp, base, dacspeed24, mem; |
| 414 | u8 r7; |
| 415 | int i; |
| 416 | |
| 417 | dev_dbg(info->device, "decode_var: xres: %i, yres: %i, xres_v: %i, xres_v: %i\n", |
| 418 | var->xres, var->yres, var->xres_virtual, var->xres_virtual); |
| 419 | dev_dbg(info->device, " xoff: %i, yoff: %i, bpp: %i, graysc: %i\n", |
| 420 | var->xoffset, var->yoffset, var->bits_per_pixel, |
| 421 | var->grayscale); |
| 422 | dev_dbg(info->device, " activate: %i, nonstd: %i, vmode: %i\n", |
| 423 | var->activate, var->nonstd, var->vmode); |
| 424 | dev_dbg(info->device, " pixclock: %i, hsynclen:%i, vsynclen:%i\n", |
| 425 | var->pixclock, var->hsync_len, var->vsync_len); |
| 426 | dev_dbg(info->device, " left: %i, right: %i, up:%i, lower:%i\n", |
| 427 | var->left_margin, var->right_margin, var->upper_margin, |
| 428 | var->lower_margin); |
| 429 | |
| 430 | |
| 431 | bpp = var->bits_per_pixel; |
| 432 | switch (bpp) { |
| 433 | case 1 ... 8: |
| 434 | bpp = 8; |
| 435 | if ((1000000 / var->pixclock) > DACSPEED8) { |
| 436 | dev_err(info->device, "requested pixclock %i MHz out of range (max. %i MHz at 8bpp)\n", |
| 437 | 1000000 / var->pixclock, DACSPEED8); |
| 438 | return -EINVAL; |
| 439 | } |
| 440 | break; |
| 441 | case 9 ... 15: |
| 442 | bpp = 15; |
| 443 | case 16: |
| 444 | if ((1000000 / var->pixclock) > DACSPEED16) { |
| 445 | dev_err(info->device, "requested pixclock %i MHz out of range (max. %i MHz at 15/16bpp)\n", |
| 446 | 1000000 / var->pixclock, DACSPEED16); |
| 447 | return -EINVAL; |
| 448 | } |
| 449 | break; |
| 450 | case 17 ... 24: |
| 451 | bpp = 24; |
| 452 | dacspeed24 = par->has_sgram ? DACSPEED24_SG : DACSPEED24_SD; |
| 453 | if ((1000000 / var->pixclock) > dacspeed24) { |
| 454 | dev_err(info->device, "requested pixclock %i MHz out of range (max. %i MHz at 24bpp)\n", |
| 455 | 1000000 / var->pixclock, dacspeed24); |
| 456 | return -EINVAL; |
| 457 | } |
| 458 | break; |
| 459 | case 25 ... 32: |
| 460 | bpp = 32; |
| 461 | if ((1000000 / var->pixclock) > DACSPEED32) { |
| 462 | dev_err(info->device, "requested pixclock %i MHz out of range (max. %i MHz at 32bpp)\n", |
| 463 | 1000000 / var->pixclock, DACSPEED32); |
| 464 | return -EINVAL; |
| 465 | } |
| 466 | break; |
| 467 | default: |
| 468 | return -EINVAL; |
| 469 | } |
| 470 | |
| 471 | xres = ALIGN(var->xres, 8); |
| 472 | vxres = ALIGN(var->xres_virtual, 16); |
| 473 | if (vxres < xres) |
| 474 | vxres = xres; |
| 475 | |
| 476 | xoffset = ALIGN(var->xoffset, 8); |
| 477 | if (xres + xoffset > vxres) |
| 478 | xoffset = vxres - xres; |
| 479 | |
| 480 | left = ALIGN(var->left_margin, 8); |
| 481 | right = ALIGN(var->right_margin, 8); |
| 482 | hslen = ALIGN(var->hsync_len, 8); |
| 483 | |
| 484 | yres = var->yres; |
| 485 | vyres = var->yres_virtual; |
| 486 | if (yres > vyres) |
| 487 | vyres = yres; |
| 488 | |
| 489 | yoffset = var->yoffset; |
| 490 | if (yres + yoffset > vyres) |
| 491 | yoffset = vyres - yres; |
| 492 | |
| 493 | lower = var->lower_margin; |
| 494 | vslen = var->vsync_len; |
| 495 | upper = var->upper_margin; |
| 496 | |
| 497 | mem = vxres * vyres * ((bpp + 1) / 8); |
| 498 | if (mem > info->screen_size) { |
Masanari Iida | ff0c264 | 2012-07-22 00:23:15 +0900 | [diff] [blame] | 499 | dev_err(info->device, "not enough video memory (%d KB requested, %ld KB available)\n", |
Ondrej Zary | 5350c65 | 2012-02-10 18:59:17 +0100 | [diff] [blame] | 500 | mem >> 10, info->screen_size >> 10); |
| 501 | return -ENOMEM; |
| 502 | } |
| 503 | |
| 504 | if (yoffset + yres > vyres) |
| 505 | yoffset = vyres - yres; |
| 506 | |
| 507 | xtotal = xres + right + hslen + left; |
| 508 | ytotal = yres + lower + vslen + upper; |
| 509 | |
| 510 | par->crtc[VGA_CRTC_H_TOTAL] = (xtotal >> 3) - 5; |
| 511 | par->crtc[VGA_CRTC_H_DISP] = (xres >> 3) - 1; |
| 512 | par->crtc[VGA_CRTC_H_BLANK_START] = ((xres + right) >> 3) - 1; |
| 513 | par->crtc[VGA_CRTC_H_SYNC_START] = (xres + right) >> 3; |
| 514 | par->crtc[VGA_CRTC_H_SYNC_END] = (((xres + right + hslen) >> 3) & 0x1F) |
| 515 | | ((((xres + right + hslen) >> 3) & 0x20) << 2); |
| 516 | par->crtc[VGA_CRTC_H_BLANK_END] = ((xres + right + hslen) >> 3 & 0x1F) |
| 517 | | 0x80; |
| 518 | |
| 519 | par->crtc[VGA_CRTC_V_TOTAL] = ytotal - 2; |
| 520 | |
| 521 | r7 = 0x10; /* disable linecompare */ |
| 522 | if (ytotal & 0x100) |
| 523 | r7 |= 0x01; |
| 524 | if (ytotal & 0x200) |
| 525 | r7 |= 0x20; |
| 526 | |
| 527 | par->crtc[VGA_CRTC_PRESET_ROW] = 0; |
| 528 | par->crtc[VGA_CRTC_MAX_SCAN] = 0x40; /* 1 scanline, no linecmp */ |
| 529 | if (var->vmode & FB_VMODE_DOUBLE) |
| 530 | par->crtc[VGA_CRTC_MAX_SCAN] |= 0x80; |
| 531 | par->crtc[VGA_CRTC_CURSOR_START] = 0x00; |
| 532 | par->crtc[VGA_CRTC_CURSOR_END] = 0x00; |
| 533 | par->crtc[VGA_CRTC_CURSOR_HI] = 0x00; |
| 534 | par->crtc[VGA_CRTC_CURSOR_LO] = 0x00; |
| 535 | par->crtc[VGA_CRTC_V_DISP_END] = yres-1; |
| 536 | if ((yres-1) & 0x100) |
| 537 | r7 |= 0x02; |
| 538 | if ((yres-1) & 0x200) |
| 539 | r7 |= 0x40; |
| 540 | |
| 541 | par->crtc[VGA_CRTC_V_BLANK_START] = yres + lower - 1; |
| 542 | par->crtc[VGA_CRTC_V_SYNC_START] = yres + lower - 1; |
| 543 | if ((yres + lower - 1) & 0x100) |
| 544 | r7 |= 0x0C; |
| 545 | if ((yres + lower - 1) & 0x200) { |
| 546 | par->crtc[VGA_CRTC_MAX_SCAN] |= 0x20; |
| 547 | r7 |= 0x80; |
| 548 | } |
| 549 | |
| 550 | /* disabled IRQ */ |
| 551 | par->crtc[VGA_CRTC_V_SYNC_END] = |
| 552 | ((yres + lower - 1 + vslen) & 0x0F) & ~0x10; |
| 553 | /* 0x7F for VGA, but some SVGA chips require all 8 bits to be set */ |
| 554 | par->crtc[VGA_CRTC_V_BLANK_END] = (yres + lower - 1 + vslen) & 0xFF; |
| 555 | |
| 556 | par->crtc[VGA_CRTC_UNDERLINE] = 0x00; |
| 557 | par->crtc[VGA_CRTC_MODE] = 0xC3 ; |
| 558 | par->crtc[VGA_CRTC_LINE_COMPARE] = 0xFF; |
| 559 | par->crtc[VGA_CRTC_OVERFLOW] = r7; |
| 560 | |
| 561 | par->vss = 0x00; /* 3DA */ |
| 562 | |
| 563 | for (i = 0x00; i < 0x10; i++) |
| 564 | par->atc[i] = i; |
| 565 | par->atc[VGA_ATC_MODE] = 0x81; |
| 566 | par->atc[VGA_ATC_OVERSCAN] = 0x00; /* 0 for EGA, 0xFF for VGA */ |
| 567 | par->atc[VGA_ATC_PLANE_ENABLE] = 0x0F; |
| 568 | par->atc[VGA_ATC_COLOR_PAGE] = 0x00; |
| 569 | |
| 570 | par->misc = 0xC3; |
| 571 | if (var->sync & FB_SYNC_HOR_HIGH_ACT) |
| 572 | par->misc &= ~0x40; |
| 573 | if (var->sync & FB_SYNC_VERT_HIGH_ACT) |
| 574 | par->misc &= ~0x80; |
| 575 | |
| 576 | par->seq[VGA_SEQ_CLOCK_MODE] = 0x01; |
| 577 | par->seq[VGA_SEQ_PLANE_WRITE] = 0x0F; |
| 578 | par->seq[VGA_SEQ_CHARACTER_MAP] = 0x00; |
| 579 | par->seq[VGA_SEQ_MEMORY_MODE] = 0x06; |
| 580 | |
| 581 | par->gdc[VGA_GFX_SR_VALUE] = 0x00; |
| 582 | par->gdc[VGA_GFX_SR_ENABLE] = 0x00; |
| 583 | par->gdc[VGA_GFX_COMPARE_VALUE] = 0x00; |
| 584 | par->gdc[VGA_GFX_DATA_ROTATE] = 0x00; |
| 585 | par->gdc[VGA_GFX_PLANE_READ] = 0; |
| 586 | par->gdc[VGA_GFX_MODE] = 0x02; |
| 587 | par->gdc[VGA_GFX_MISC] = 0x05; |
| 588 | par->gdc[VGA_GFX_COMPARE_MASK] = 0x0F; |
| 589 | par->gdc[VGA_GFX_BIT_MASK] = 0xFF; |
| 590 | |
| 591 | base = (yoffset * vxres + (xoffset & ~7)) >> 2; |
| 592 | switch (bpp) { |
| 593 | case 8: |
| 594 | par->crtc[VGA_CRTC_OFFSET] = vxres >> 3; |
| 595 | par->ext_offset = vxres >> 11; |
| 596 | par->pixelpipe_cfg1 = DISPLAY_8BPP_MODE; |
| 597 | par->bitblt_cntl = COLEXP_8BPP; |
| 598 | break; |
| 599 | case 15: /* 0rrrrrgg gggbbbbb */ |
| 600 | case 16: /* rrrrrggg gggbbbbb */ |
| 601 | par->pixelpipe_cfg1 = (var->green.length == 6) ? |
| 602 | DISPLAY_16BPP_MODE : DISPLAY_15BPP_MODE; |
| 603 | par->crtc[VGA_CRTC_OFFSET] = vxres >> 2; |
| 604 | par->ext_offset = vxres >> 10; |
| 605 | par->bitblt_cntl = COLEXP_16BPP; |
| 606 | base *= 2; |
| 607 | break; |
| 608 | case 24: |
| 609 | par->crtc[VGA_CRTC_OFFSET] = (vxres * 3) >> 3; |
| 610 | par->ext_offset = (vxres * 3) >> 11; |
| 611 | par->pixelpipe_cfg1 = DISPLAY_24BPP_MODE; |
| 612 | par->bitblt_cntl = COLEXP_24BPP; |
| 613 | base &= 0xFFFFFFFE; /* ...ignore the last bit. */ |
| 614 | base *= 3; |
| 615 | break; |
| 616 | case 32: |
| 617 | par->crtc[VGA_CRTC_OFFSET] = vxres >> 1; |
| 618 | par->ext_offset = vxres >> 9; |
| 619 | par->pixelpipe_cfg1 = DISPLAY_32BPP_MODE; |
| 620 | par->bitblt_cntl = COLEXP_RESERVED; /* Unimplemented on i740 */ |
| 621 | base *= 4; |
| 622 | break; |
| 623 | } |
| 624 | |
| 625 | par->crtc[VGA_CRTC_START_LO] = base & 0x000000FF; |
| 626 | par->crtc[VGA_CRTC_START_HI] = (base & 0x0000FF00) >> 8; |
| 627 | par->ext_start_addr = |
| 628 | ((base & 0x003F0000) >> 16) | EXT_START_ADDR_ENABLE; |
| 629 | par->ext_start_addr_hi = (base & 0x3FC00000) >> 22; |
| 630 | |
| 631 | par->pixelpipe_cfg0 = DAC_8_BIT; |
| 632 | |
| 633 | par->pixelpipe_cfg2 = DISPLAY_GAMMA_ENABLE | OVERLAY_GAMMA_ENABLE; |
| 634 | par->io_cntl = EXTENDED_CRTC_CNTL; |
| 635 | par->address_mapping = LINEAR_MODE_ENABLE | PAGE_MAPPING_ENABLE; |
| 636 | par->display_cntl = HIRES_MODE; |
| 637 | |
| 638 | /* Set the MCLK freq */ |
| 639 | par->pll_cntl = PLL_MEMCLK_100000KHZ; /* 100 MHz -- use as default */ |
| 640 | |
| 641 | /* Calculate the extended CRTC regs */ |
| 642 | par->ext_vert_total = (ytotal - 2) >> 8; |
| 643 | par->ext_vert_disp_end = (yres - 1) >> 8; |
| 644 | par->ext_vert_sync_start = (yres + lower) >> 8; |
| 645 | par->ext_vert_blank_start = (yres + lower) >> 8; |
| 646 | par->ext_horiz_total = ((xtotal >> 3) - 5) >> 8; |
| 647 | par->ext_horiz_blank = (((xres + right) >> 3) & 0x40) >> 6; |
| 648 | |
| 649 | par->interlace_cntl = INTERLACE_DISABLE; |
| 650 | |
| 651 | /* Set the overscan color to 0. (NOTE: This only affects >8bpp mode) */ |
| 652 | par->atc[VGA_ATC_OVERSCAN] = 0; |
| 653 | |
| 654 | /* Calculate VCLK that most closely matches the requested dot clock */ |
| 655 | i740_calc_vclk((((u32)1e9) / var->pixclock) * (u32)(1e3), par); |
| 656 | |
| 657 | /* Since we program the clocks ourselves, always use VCLK2. */ |
| 658 | par->misc |= 0x0C; |
| 659 | |
| 660 | /* Calculate the FIFO Watermark and Burst Length. */ |
| 661 | par->lmi_fifo_watermark = |
| 662 | i740_calc_fifo(par, 1000000 / var->pixclock, bpp); |
| 663 | |
| 664 | return 0; |
| 665 | } |
| 666 | |
| 667 | static int i740fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) |
| 668 | { |
| 669 | switch (var->bits_per_pixel) { |
| 670 | case 8: |
| 671 | var->red.offset = var->green.offset = var->blue.offset = 0; |
| 672 | var->red.length = var->green.length = var->blue.length = 8; |
| 673 | break; |
| 674 | case 16: |
| 675 | switch (var->green.length) { |
| 676 | default: |
| 677 | case 5: |
| 678 | var->red.offset = 10; |
| 679 | var->green.offset = 5; |
| 680 | var->blue.offset = 0; |
| 681 | var->red.length = 5; |
| 682 | var->green.length = 5; |
| 683 | var->blue.length = 5; |
| 684 | break; |
| 685 | case 6: |
| 686 | var->red.offset = 11; |
| 687 | var->green.offset = 5; |
| 688 | var->blue.offset = 0; |
| 689 | var->red.length = var->blue.length = 5; |
| 690 | break; |
| 691 | } |
| 692 | break; |
| 693 | case 24: |
| 694 | var->red.offset = 16; |
| 695 | var->green.offset = 8; |
| 696 | var->blue.offset = 0; |
| 697 | var->red.length = var->green.length = var->blue.length = 8; |
| 698 | break; |
| 699 | case 32: |
| 700 | var->transp.offset = 24; |
| 701 | var->red.offset = 16; |
| 702 | var->green.offset = 8; |
| 703 | var->blue.offset = 0; |
| 704 | var->transp.length = 8; |
| 705 | var->red.length = var->green.length = var->blue.length = 8; |
| 706 | break; |
| 707 | default: |
| 708 | return -EINVAL; |
| 709 | } |
| 710 | |
| 711 | if (var->xres > var->xres_virtual) |
| 712 | var->xres_virtual = var->xres; |
| 713 | |
| 714 | if (var->yres > var->yres_virtual) |
| 715 | var->yres_virtual = var->yres; |
| 716 | |
| 717 | if (info->monspecs.hfmax && info->monspecs.vfmax && |
| 718 | info->monspecs.dclkmax && fb_validate_mode(var, info) < 0) |
| 719 | return -EINVAL; |
| 720 | |
| 721 | return 0; |
| 722 | } |
| 723 | |
| 724 | static void vga_protect(struct i740fb_par *par) |
| 725 | { |
| 726 | /* disable the display */ |
| 727 | i740outreg_mask(par, VGA_SEQ_I, VGA_SEQ_CLOCK_MODE, 0x20, 0x20); |
| 728 | |
| 729 | i740inb(par, 0x3DA); |
Masanari Iida | ff0c264 | 2012-07-22 00:23:15 +0900 | [diff] [blame] | 730 | i740outb(par, VGA_ATT_W, 0x00); /* enable palette access */ |
Ondrej Zary | 5350c65 | 2012-02-10 18:59:17 +0100 | [diff] [blame] | 731 | } |
| 732 | |
| 733 | static void vga_unprotect(struct i740fb_par *par) |
| 734 | { |
| 735 | /* reenable display */ |
| 736 | i740outreg_mask(par, VGA_SEQ_I, VGA_SEQ_CLOCK_MODE, 0, 0x20); |
| 737 | |
| 738 | i740inb(par, 0x3DA); |
Masanari Iida | ff0c264 | 2012-07-22 00:23:15 +0900 | [diff] [blame] | 739 | i740outb(par, VGA_ATT_W, 0x20); /* disable palette access */ |
Ondrej Zary | 5350c65 | 2012-02-10 18:59:17 +0100 | [diff] [blame] | 740 | } |
| 741 | |
| 742 | static int i740fb_set_par(struct fb_info *info) |
| 743 | { |
| 744 | struct i740fb_par *par = info->par; |
| 745 | u32 itemp; |
| 746 | int i; |
| 747 | |
| 748 | i = i740fb_decode_var(&info->var, par, info); |
| 749 | if (i) |
| 750 | return i; |
| 751 | |
| 752 | memset(info->screen_base, 0, info->screen_size); |
| 753 | |
| 754 | vga_protect(par); |
| 755 | |
| 756 | i740outreg(par, XRX, DRAM_EXT_CNTL, DRAM_REFRESH_DISABLE); |
| 757 | |
| 758 | mdelay(1); |
| 759 | |
| 760 | i740outreg(par, XRX, VCLK2_VCO_M, par->video_clk2_m); |
| 761 | i740outreg(par, XRX, VCLK2_VCO_N, par->video_clk2_n); |
| 762 | i740outreg(par, XRX, VCLK2_VCO_MN_MSBS, par->video_clk2_mn_msbs); |
| 763 | i740outreg(par, XRX, VCLK2_VCO_DIV_SEL, par->video_clk2_div_sel); |
| 764 | |
| 765 | i740outreg_mask(par, XRX, PIXPIPE_CONFIG_0, |
| 766 | par->pixelpipe_cfg0 & DAC_8_BIT, 0x80); |
| 767 | |
| 768 | i740inb(par, 0x3DA); |
| 769 | i740outb(par, 0x3C0, 0x00); |
| 770 | |
| 771 | /* update misc output register */ |
| 772 | i740outb(par, VGA_MIS_W, par->misc | 0x01); |
| 773 | |
| 774 | /* synchronous reset on */ |
| 775 | i740outreg(par, VGA_SEQ_I, VGA_SEQ_RESET, 0x01); |
| 776 | /* write sequencer registers */ |
| 777 | i740outreg(par, VGA_SEQ_I, VGA_SEQ_CLOCK_MODE, |
| 778 | par->seq[VGA_SEQ_CLOCK_MODE] | 0x20); |
| 779 | for (i = 2; i < VGA_SEQ_C; i++) |
| 780 | i740outreg(par, VGA_SEQ_I, i, par->seq[i]); |
| 781 | |
| 782 | /* synchronous reset off */ |
| 783 | i740outreg(par, VGA_SEQ_I, VGA_SEQ_RESET, 0x03); |
| 784 | |
| 785 | /* deprotect CRT registers 0-7 */ |
| 786 | i740outreg(par, VGA_CRT_IC, VGA_CRTC_V_SYNC_END, |
| 787 | par->crtc[VGA_CRTC_V_SYNC_END]); |
| 788 | |
| 789 | /* write CRT registers */ |
| 790 | for (i = 0; i < VGA_CRT_C; i++) |
| 791 | i740outreg(par, VGA_CRT_IC, i, par->crtc[i]); |
| 792 | |
| 793 | /* write graphics controller registers */ |
| 794 | for (i = 0; i < VGA_GFX_C; i++) |
| 795 | i740outreg(par, VGA_GFX_I, i, par->gdc[i]); |
| 796 | |
| 797 | /* write attribute controller registers */ |
| 798 | for (i = 0; i < VGA_ATT_C; i++) { |
| 799 | i740inb(par, VGA_IS1_RC); /* reset flip-flop */ |
| 800 | i740outb(par, VGA_ATT_IW, i); |
| 801 | i740outb(par, VGA_ATT_IW, par->atc[i]); |
| 802 | } |
| 803 | |
| 804 | i740inb(par, VGA_IS1_RC); |
| 805 | i740outb(par, VGA_ATT_IW, 0x20); |
| 806 | |
| 807 | i740outreg(par, VGA_CRT_IC, EXT_VERT_TOTAL, par->ext_vert_total); |
| 808 | i740outreg(par, VGA_CRT_IC, EXT_VERT_DISPLAY, par->ext_vert_disp_end); |
| 809 | i740outreg(par, VGA_CRT_IC, EXT_VERT_SYNC_START, |
| 810 | par->ext_vert_sync_start); |
| 811 | i740outreg(par, VGA_CRT_IC, EXT_VERT_BLANK_START, |
| 812 | par->ext_vert_blank_start); |
| 813 | i740outreg(par, VGA_CRT_IC, EXT_HORIZ_TOTAL, par->ext_horiz_total); |
| 814 | i740outreg(par, VGA_CRT_IC, EXT_HORIZ_BLANK, par->ext_horiz_blank); |
| 815 | i740outreg(par, VGA_CRT_IC, EXT_OFFSET, par->ext_offset); |
| 816 | i740outreg(par, VGA_CRT_IC, EXT_START_ADDR_HI, par->ext_start_addr_hi); |
| 817 | i740outreg(par, VGA_CRT_IC, EXT_START_ADDR, par->ext_start_addr); |
| 818 | |
| 819 | i740outreg_mask(par, VGA_CRT_IC, INTERLACE_CNTL, |
| 820 | par->interlace_cntl, INTERLACE_ENABLE); |
| 821 | i740outreg_mask(par, XRX, ADDRESS_MAPPING, par->address_mapping, 0x1F); |
| 822 | i740outreg_mask(par, XRX, BITBLT_CNTL, par->bitblt_cntl, COLEXP_MODE); |
| 823 | i740outreg_mask(par, XRX, DISPLAY_CNTL, |
| 824 | par->display_cntl, VGA_WRAP_MODE | GUI_MODE); |
| 825 | i740outreg_mask(par, XRX, PIXPIPE_CONFIG_0, par->pixelpipe_cfg0, 0x9B); |
| 826 | i740outreg_mask(par, XRX, PIXPIPE_CONFIG_2, par->pixelpipe_cfg2, 0x0C); |
| 827 | |
| 828 | i740outreg(par, XRX, PLL_CNTL, par->pll_cntl); |
| 829 | |
| 830 | i740outreg_mask(par, XRX, PIXPIPE_CONFIG_1, |
| 831 | par->pixelpipe_cfg1, DISPLAY_COLOR_MODE); |
| 832 | |
| 833 | itemp = readl(par->regs + FWATER_BLC); |
| 834 | itemp &= ~(LMI_BURST_LENGTH | LMI_FIFO_WATERMARK); |
| 835 | itemp |= par->lmi_fifo_watermark; |
| 836 | writel(itemp, par->regs + FWATER_BLC); |
| 837 | |
| 838 | i740outreg(par, XRX, DRAM_EXT_CNTL, DRAM_REFRESH_60HZ); |
| 839 | |
| 840 | i740outreg_mask(par, MRX, COL_KEY_CNTL_1, 0, BLANK_DISP_OVERLAY); |
| 841 | i740outreg_mask(par, XRX, IO_CTNL, |
| 842 | par->io_cntl, EXTENDED_ATTR_CNTL | EXTENDED_CRTC_CNTL); |
| 843 | |
| 844 | if (par->pixelpipe_cfg1 != DISPLAY_8BPP_MODE) { |
| 845 | i740outb(par, VGA_PEL_MSK, 0xFF); |
| 846 | i740outb(par, VGA_PEL_IW, 0x00); |
| 847 | for (i = 0; i < 256; i++) { |
| 848 | itemp = (par->pixelpipe_cfg0 & DAC_8_BIT) ? i : i >> 2; |
| 849 | i740outb(par, VGA_PEL_D, itemp); |
| 850 | i740outb(par, VGA_PEL_D, itemp); |
| 851 | i740outb(par, VGA_PEL_D, itemp); |
| 852 | } |
| 853 | } |
| 854 | |
| 855 | /* Wait for screen to stabilize. */ |
| 856 | mdelay(50); |
| 857 | vga_unprotect(par); |
| 858 | |
| 859 | info->fix.line_length = |
| 860 | info->var.xres_virtual * info->var.bits_per_pixel / 8; |
| 861 | if (info->var.bits_per_pixel == 8) |
| 862 | info->fix.visual = FB_VISUAL_PSEUDOCOLOR; |
| 863 | else |
| 864 | info->fix.visual = FB_VISUAL_TRUECOLOR; |
| 865 | |
| 866 | return 0; |
| 867 | } |
| 868 | |
| 869 | static int i740fb_setcolreg(unsigned regno, unsigned red, unsigned green, |
| 870 | unsigned blue, unsigned transp, |
| 871 | struct fb_info *info) |
| 872 | { |
| 873 | u32 r, g, b; |
| 874 | |
| 875 | dev_dbg(info->device, "setcolreg: regno: %i, red=%d, green=%d, blue=%d, transp=%d, bpp=%d\n", |
| 876 | regno, red, green, blue, transp, info->var.bits_per_pixel); |
| 877 | |
| 878 | switch (info->fix.visual) { |
| 879 | case FB_VISUAL_PSEUDOCOLOR: |
| 880 | if (regno >= 256) |
| 881 | return -EINVAL; |
| 882 | i740outb(info->par, VGA_PEL_IW, regno); |
| 883 | i740outb(info->par, VGA_PEL_D, red >> 8); |
| 884 | i740outb(info->par, VGA_PEL_D, green >> 8); |
| 885 | i740outb(info->par, VGA_PEL_D, blue >> 8); |
| 886 | break; |
| 887 | case FB_VISUAL_TRUECOLOR: |
| 888 | if (regno >= 16) |
| 889 | return -EINVAL; |
| 890 | r = (red >> (16 - info->var.red.length)) |
| 891 | << info->var.red.offset; |
| 892 | b = (blue >> (16 - info->var.blue.length)) |
| 893 | << info->var.blue.offset; |
| 894 | g = (green >> (16 - info->var.green.length)) |
| 895 | << info->var.green.offset; |
| 896 | ((u32 *) info->pseudo_palette)[regno] = r | g | b; |
| 897 | break; |
| 898 | default: |
| 899 | return -EINVAL; |
| 900 | } |
| 901 | |
| 902 | return 0; |
| 903 | } |
| 904 | |
| 905 | static int i740fb_pan_display(struct fb_var_screeninfo *var, |
| 906 | struct fb_info *info) |
| 907 | { |
| 908 | struct i740fb_par *par = info->par; |
| 909 | u32 base = (var->yoffset * info->var.xres_virtual |
| 910 | + (var->xoffset & ~7)) >> 2; |
| 911 | |
| 912 | dev_dbg(info->device, "pan_display: xoffset: %i yoffset: %i base: %i\n", |
| 913 | var->xoffset, var->yoffset, base); |
| 914 | |
| 915 | switch (info->var.bits_per_pixel) { |
| 916 | case 8: |
| 917 | break; |
| 918 | case 15: |
| 919 | case 16: |
| 920 | base *= 2; |
| 921 | break; |
| 922 | case 24: |
| 923 | /* |
| 924 | * The last bit does not seem to have any effect on the start |
| 925 | * address register in 24bpp mode, so... |
| 926 | */ |
| 927 | base &= 0xFFFFFFFE; /* ...ignore the last bit. */ |
| 928 | base *= 3; |
| 929 | break; |
| 930 | case 32: |
| 931 | base *= 4; |
| 932 | break; |
| 933 | } |
| 934 | |
| 935 | par->crtc[VGA_CRTC_START_LO] = base & 0x000000FF; |
| 936 | par->crtc[VGA_CRTC_START_HI] = (base & 0x0000FF00) >> 8; |
| 937 | par->ext_start_addr_hi = (base & 0x3FC00000) >> 22; |
| 938 | par->ext_start_addr = |
| 939 | ((base & 0x003F0000) >> 16) | EXT_START_ADDR_ENABLE; |
| 940 | |
| 941 | i740outreg(par, VGA_CRT_IC, VGA_CRTC_START_LO, base & 0x000000FF); |
| 942 | i740outreg(par, VGA_CRT_IC, VGA_CRTC_START_HI, |
| 943 | (base & 0x0000FF00) >> 8); |
| 944 | i740outreg(par, VGA_CRT_IC, EXT_START_ADDR_HI, |
| 945 | (base & 0x3FC00000) >> 22); |
| 946 | i740outreg(par, VGA_CRT_IC, EXT_START_ADDR, |
| 947 | ((base & 0x003F0000) >> 16) | EXT_START_ADDR_ENABLE); |
| 948 | |
| 949 | return 0; |
| 950 | } |
| 951 | |
| 952 | static int i740fb_blank(int blank_mode, struct fb_info *info) |
| 953 | { |
| 954 | struct i740fb_par *par = info->par; |
| 955 | |
| 956 | unsigned char SEQ01; |
| 957 | int DPMSSyncSelect; |
| 958 | |
| 959 | switch (blank_mode) { |
| 960 | case FB_BLANK_UNBLANK: |
| 961 | case FB_BLANK_NORMAL: |
| 962 | SEQ01 = 0x00; |
| 963 | DPMSSyncSelect = HSYNC_ON | VSYNC_ON; |
| 964 | break; |
| 965 | case FB_BLANK_VSYNC_SUSPEND: |
| 966 | SEQ01 = 0x20; |
| 967 | DPMSSyncSelect = HSYNC_ON | VSYNC_OFF; |
| 968 | break; |
| 969 | case FB_BLANK_HSYNC_SUSPEND: |
| 970 | SEQ01 = 0x20; |
| 971 | DPMSSyncSelect = HSYNC_OFF | VSYNC_ON; |
| 972 | break; |
| 973 | case FB_BLANK_POWERDOWN: |
| 974 | SEQ01 = 0x20; |
| 975 | DPMSSyncSelect = HSYNC_OFF | VSYNC_OFF; |
| 976 | break; |
| 977 | default: |
| 978 | return -EINVAL; |
| 979 | } |
| 980 | /* Turn the screen on/off */ |
| 981 | i740outb(par, SRX, 0x01); |
| 982 | SEQ01 |= i740inb(par, SRX + 1) & ~0x20; |
| 983 | i740outb(par, SRX, 0x01); |
| 984 | i740outb(par, SRX + 1, SEQ01); |
| 985 | |
| 986 | /* Set the DPMS mode */ |
| 987 | i740outreg(par, XRX, DPMS_SYNC_SELECT, DPMSSyncSelect); |
| 988 | |
| 989 | /* Let fbcon do a soft blank for us */ |
| 990 | return (blank_mode == FB_BLANK_NORMAL) ? 1 : 0; |
| 991 | } |
| 992 | |
| 993 | static struct fb_ops i740fb_ops = { |
| 994 | .owner = THIS_MODULE, |
| 995 | .fb_open = i740fb_open, |
| 996 | .fb_release = i740fb_release, |
| 997 | .fb_check_var = i740fb_check_var, |
| 998 | .fb_set_par = i740fb_set_par, |
| 999 | .fb_setcolreg = i740fb_setcolreg, |
| 1000 | .fb_blank = i740fb_blank, |
| 1001 | .fb_pan_display = i740fb_pan_display, |
| 1002 | .fb_fillrect = cfb_fillrect, |
| 1003 | .fb_copyarea = cfb_copyarea, |
| 1004 | .fb_imageblit = cfb_imageblit, |
| 1005 | }; |
| 1006 | |
| 1007 | /* ------------------------------------------------------------------------- */ |
| 1008 | |
Greg Kroah-Hartman | 48c68c4 | 2012-12-21 13:07:39 -0800 | [diff] [blame] | 1009 | static int i740fb_probe(struct pci_dev *dev, const struct pci_device_id *ent) |
Ondrej Zary | 5350c65 | 2012-02-10 18:59:17 +0100 | [diff] [blame] | 1010 | { |
| 1011 | struct fb_info *info; |
| 1012 | struct i740fb_par *par; |
| 1013 | int ret, tmp; |
| 1014 | bool found = false; |
| 1015 | u8 *edid; |
| 1016 | |
| 1017 | info = framebuffer_alloc(sizeof(struct i740fb_par), &(dev->dev)); |
| 1018 | if (!info) { |
| 1019 | dev_err(&(dev->dev), "cannot allocate framebuffer\n"); |
| 1020 | return -ENOMEM; |
| 1021 | } |
| 1022 | |
| 1023 | par = info->par; |
| 1024 | mutex_init(&par->open_lock); |
| 1025 | |
| 1026 | info->var.activate = FB_ACTIVATE_NOW; |
| 1027 | info->var.bits_per_pixel = 8; |
| 1028 | info->fbops = &i740fb_ops; |
| 1029 | info->pseudo_palette = par->pseudo_palette; |
| 1030 | |
| 1031 | ret = pci_enable_device(dev); |
| 1032 | if (ret) { |
| 1033 | dev_err(info->device, "cannot enable PCI device\n"); |
| 1034 | goto err_enable_device; |
| 1035 | } |
| 1036 | |
| 1037 | ret = pci_request_regions(dev, info->fix.id); |
| 1038 | if (ret) { |
| 1039 | dev_err(info->device, "error requesting regions\n"); |
| 1040 | goto err_request_regions; |
| 1041 | } |
| 1042 | |
| 1043 | info->screen_base = pci_ioremap_bar(dev, 0); |
| 1044 | if (!info->screen_base) { |
| 1045 | dev_err(info->device, "error remapping base\n"); |
| 1046 | ret = -ENOMEM; |
| 1047 | goto err_ioremap_1; |
| 1048 | } |
| 1049 | |
| 1050 | par->regs = pci_ioremap_bar(dev, 1); |
| 1051 | if (!par->regs) { |
| 1052 | dev_err(info->device, "error remapping MMIO\n"); |
| 1053 | ret = -ENOMEM; |
| 1054 | goto err_ioremap_2; |
| 1055 | } |
| 1056 | |
| 1057 | /* detect memory size */ |
| 1058 | if ((i740inreg(par, XRX, DRAM_ROW_TYPE) & DRAM_ROW_1) |
| 1059 | == DRAM_ROW_1_SDRAM) |
| 1060 | i740outb(par, XRX, DRAM_ROW_BNDRY_1); |
| 1061 | else |
| 1062 | i740outb(par, XRX, DRAM_ROW_BNDRY_0); |
| 1063 | info->screen_size = i740inb(par, XRX + 1) * 1024 * 1024; |
| 1064 | /* detect memory type */ |
| 1065 | tmp = i740inreg(par, XRX, DRAM_ROW_CNTL_LO); |
| 1066 | par->has_sgram = !((tmp & DRAM_RAS_TIMING) || |
| 1067 | (tmp & DRAM_RAS_PRECHARGE)); |
| 1068 | |
Joe Perches | 31b6780 | 2013-09-19 18:35:55 -0700 | [diff] [blame] | 1069 | fb_info(info, "Intel740 on %s, %ld KB %s\n", |
Ondrej Zary | 5350c65 | 2012-02-10 18:59:17 +0100 | [diff] [blame] | 1070 | pci_name(dev), info->screen_size >> 10, |
| 1071 | par->has_sgram ? "SGRAM" : "SDRAM"); |
| 1072 | |
| 1073 | info->fix = i740fb_fix; |
| 1074 | info->fix.mmio_start = pci_resource_start(dev, 1); |
| 1075 | info->fix.mmio_len = pci_resource_len(dev, 1); |
| 1076 | info->fix.smem_start = pci_resource_start(dev, 0); |
| 1077 | info->fix.smem_len = info->screen_size; |
| 1078 | info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN; |
| 1079 | |
| 1080 | if (i740fb_setup_ddc_bus(info) == 0) { |
| 1081 | par->ddc_registered = true; |
| 1082 | edid = fb_ddc_read(&par->ddc_adapter); |
| 1083 | if (edid) { |
| 1084 | fb_edid_to_monspecs(edid, &info->monspecs); |
| 1085 | kfree(edid); |
| 1086 | if (!info->monspecs.modedb) |
| 1087 | dev_err(info->device, |
| 1088 | "error getting mode database\n"); |
| 1089 | else { |
| 1090 | const struct fb_videomode *m; |
| 1091 | |
| 1092 | fb_videomode_to_modelist( |
| 1093 | info->monspecs.modedb, |
| 1094 | info->monspecs.modedb_len, |
| 1095 | &info->modelist); |
| 1096 | m = fb_find_best_display(&info->monspecs, |
| 1097 | &info->modelist); |
| 1098 | if (m) { |
| 1099 | fb_videomode_to_var(&info->var, m); |
| 1100 | /* fill all other info->var's fields */ |
| 1101 | if (!i740fb_check_var(&info->var, info)) |
| 1102 | found = true; |
| 1103 | } |
| 1104 | } |
| 1105 | } |
| 1106 | } |
| 1107 | |
| 1108 | if (!mode_option && !found) |
| 1109 | mode_option = "640x480-8@60"; |
| 1110 | |
| 1111 | if (mode_option) { |
| 1112 | ret = fb_find_mode(&info->var, info, mode_option, |
| 1113 | info->monspecs.modedb, |
| 1114 | info->monspecs.modedb_len, |
| 1115 | NULL, info->var.bits_per_pixel); |
| 1116 | if (!ret || ret == 4) { |
| 1117 | dev_err(info->device, "mode %s not found\n", |
| 1118 | mode_option); |
| 1119 | ret = -EINVAL; |
| 1120 | } |
| 1121 | } |
| 1122 | |
| 1123 | fb_destroy_modedb(info->monspecs.modedb); |
| 1124 | info->monspecs.modedb = NULL; |
| 1125 | |
| 1126 | /* maximize virtual vertical size for fast scrolling */ |
| 1127 | info->var.yres_virtual = info->fix.smem_len * 8 / |
| 1128 | (info->var.bits_per_pixel * info->var.xres_virtual); |
| 1129 | |
| 1130 | if (ret == -EINVAL) |
| 1131 | goto err_find_mode; |
| 1132 | |
| 1133 | ret = fb_alloc_cmap(&info->cmap, 256, 0); |
| 1134 | if (ret) { |
| 1135 | dev_err(info->device, "cannot allocate colormap\n"); |
| 1136 | goto err_alloc_cmap; |
| 1137 | } |
| 1138 | |
| 1139 | ret = register_framebuffer(info); |
| 1140 | if (ret) { |
| 1141 | dev_err(info->device, "error registering framebuffer\n"); |
| 1142 | goto err_reg_framebuffer; |
| 1143 | } |
| 1144 | |
Joe Perches | 31b6780 | 2013-09-19 18:35:55 -0700 | [diff] [blame] | 1145 | fb_info(info, "%s frame buffer device\n", info->fix.id); |
Ondrej Zary | 5350c65 | 2012-02-10 18:59:17 +0100 | [diff] [blame] | 1146 | pci_set_drvdata(dev, info); |
| 1147 | #ifdef CONFIG_MTRR |
| 1148 | if (mtrr) { |
| 1149 | par->mtrr_reg = -1; |
| 1150 | par->mtrr_reg = mtrr_add(info->fix.smem_start, |
| 1151 | info->fix.smem_len, MTRR_TYPE_WRCOMB, 1); |
| 1152 | } |
| 1153 | #endif |
| 1154 | return 0; |
| 1155 | |
| 1156 | err_reg_framebuffer: |
| 1157 | fb_dealloc_cmap(&info->cmap); |
| 1158 | err_alloc_cmap: |
| 1159 | err_find_mode: |
| 1160 | if (par->ddc_registered) |
| 1161 | i2c_del_adapter(&par->ddc_adapter); |
| 1162 | pci_iounmap(dev, par->regs); |
| 1163 | err_ioremap_2: |
| 1164 | pci_iounmap(dev, info->screen_base); |
| 1165 | err_ioremap_1: |
| 1166 | pci_release_regions(dev); |
| 1167 | err_request_regions: |
| 1168 | /* pci_disable_device(dev); */ |
| 1169 | err_enable_device: |
| 1170 | framebuffer_release(info); |
| 1171 | return ret; |
| 1172 | } |
| 1173 | |
Greg Kroah-Hartman | 48c68c4 | 2012-12-21 13:07:39 -0800 | [diff] [blame] | 1174 | static void i740fb_remove(struct pci_dev *dev) |
Ondrej Zary | 5350c65 | 2012-02-10 18:59:17 +0100 | [diff] [blame] | 1175 | { |
| 1176 | struct fb_info *info = pci_get_drvdata(dev); |
| 1177 | |
| 1178 | if (info) { |
Ondrej Zary | 5350c65 | 2012-02-10 18:59:17 +0100 | [diff] [blame] | 1179 | struct i740fb_par *par = info->par; |
| 1180 | |
Florian Tobias Schandinat | 94f61a7 | 2012-02-19 19:11:51 +0000 | [diff] [blame] | 1181 | #ifdef CONFIG_MTRR |
Ondrej Zary | 5350c65 | 2012-02-10 18:59:17 +0100 | [diff] [blame] | 1182 | if (par->mtrr_reg >= 0) { |
| 1183 | mtrr_del(par->mtrr_reg, 0, 0); |
| 1184 | par->mtrr_reg = -1; |
| 1185 | } |
| 1186 | #endif |
| 1187 | unregister_framebuffer(info); |
| 1188 | fb_dealloc_cmap(&info->cmap); |
| 1189 | if (par->ddc_registered) |
| 1190 | i2c_del_adapter(&par->ddc_adapter); |
| 1191 | pci_iounmap(dev, par->regs); |
| 1192 | pci_iounmap(dev, info->screen_base); |
| 1193 | pci_release_regions(dev); |
| 1194 | /* pci_disable_device(dev); */ |
Ondrej Zary | 5350c65 | 2012-02-10 18:59:17 +0100 | [diff] [blame] | 1195 | framebuffer_release(info); |
| 1196 | } |
| 1197 | } |
| 1198 | |
| 1199 | #ifdef CONFIG_PM |
| 1200 | static int i740fb_suspend(struct pci_dev *dev, pm_message_t state) |
| 1201 | { |
| 1202 | struct fb_info *info = pci_get_drvdata(dev); |
| 1203 | struct i740fb_par *par = info->par; |
| 1204 | |
| 1205 | /* don't disable console during hibernation and wakeup from it */ |
| 1206 | if (state.event == PM_EVENT_FREEZE || state.event == PM_EVENT_PRETHAW) |
| 1207 | return 0; |
| 1208 | |
| 1209 | console_lock(); |
| 1210 | mutex_lock(&(par->open_lock)); |
| 1211 | |
| 1212 | /* do nothing if framebuffer is not active */ |
| 1213 | if (par->ref_count == 0) { |
| 1214 | mutex_unlock(&(par->open_lock)); |
| 1215 | console_unlock(); |
| 1216 | return 0; |
| 1217 | } |
| 1218 | |
| 1219 | fb_set_suspend(info, 1); |
| 1220 | |
| 1221 | pci_save_state(dev); |
| 1222 | pci_disable_device(dev); |
| 1223 | pci_set_power_state(dev, pci_choose_state(dev, state)); |
| 1224 | |
| 1225 | mutex_unlock(&(par->open_lock)); |
| 1226 | console_unlock(); |
| 1227 | |
| 1228 | return 0; |
| 1229 | } |
| 1230 | |
| 1231 | static int i740fb_resume(struct pci_dev *dev) |
| 1232 | { |
| 1233 | struct fb_info *info = pci_get_drvdata(dev); |
| 1234 | struct i740fb_par *par = info->par; |
| 1235 | |
| 1236 | console_lock(); |
| 1237 | mutex_lock(&(par->open_lock)); |
| 1238 | |
| 1239 | if (par->ref_count == 0) |
| 1240 | goto fail; |
| 1241 | |
| 1242 | pci_set_power_state(dev, PCI_D0); |
| 1243 | pci_restore_state(dev); |
| 1244 | if (pci_enable_device(dev)) |
| 1245 | goto fail; |
| 1246 | |
| 1247 | i740fb_set_par(info); |
| 1248 | fb_set_suspend(info, 0); |
| 1249 | |
| 1250 | fail: |
| 1251 | mutex_unlock(&(par->open_lock)); |
| 1252 | console_unlock(); |
| 1253 | return 0; |
| 1254 | } |
| 1255 | #else |
| 1256 | #define i740fb_suspend NULL |
| 1257 | #define i740fb_resume NULL |
| 1258 | #endif /* CONFIG_PM */ |
| 1259 | |
| 1260 | #define I740_ID_PCI 0x00d1 |
| 1261 | #define I740_ID_AGP 0x7800 |
| 1262 | |
Benoit Taine | 9baa3c3 | 2014-08-08 15:56:03 +0200 | [diff] [blame] | 1263 | static const struct pci_device_id i740fb_id_table[] = { |
Ondrej Zary | 5350c65 | 2012-02-10 18:59:17 +0100 | [diff] [blame] | 1264 | { PCI_DEVICE(PCI_VENDOR_ID_INTEL, I740_ID_PCI) }, |
| 1265 | { PCI_DEVICE(PCI_VENDOR_ID_INTEL, I740_ID_AGP) }, |
| 1266 | { 0 } |
| 1267 | }; |
| 1268 | MODULE_DEVICE_TABLE(pci, i740fb_id_table); |
| 1269 | |
| 1270 | static struct pci_driver i740fb_driver = { |
| 1271 | .name = "i740fb", |
| 1272 | .id_table = i740fb_id_table, |
| 1273 | .probe = i740fb_probe, |
Greg Kroah-Hartman | 48c68c4 | 2012-12-21 13:07:39 -0800 | [diff] [blame] | 1274 | .remove = i740fb_remove, |
Ondrej Zary | 5350c65 | 2012-02-10 18:59:17 +0100 | [diff] [blame] | 1275 | .suspend = i740fb_suspend, |
| 1276 | .resume = i740fb_resume, |
| 1277 | }; |
| 1278 | |
| 1279 | #ifndef MODULE |
| 1280 | static int __init i740fb_setup(char *options) |
| 1281 | { |
| 1282 | char *opt; |
| 1283 | |
| 1284 | if (!options || !*options) |
| 1285 | return 0; |
| 1286 | |
| 1287 | while ((opt = strsep(&options, ",")) != NULL) { |
| 1288 | if (!*opt) |
| 1289 | continue; |
| 1290 | #ifdef CONFIG_MTRR |
| 1291 | else if (!strncmp(opt, "mtrr:", 5)) |
| 1292 | mtrr = simple_strtoul(opt + 5, NULL, 0); |
| 1293 | #endif |
| 1294 | else |
| 1295 | mode_option = opt; |
| 1296 | } |
| 1297 | |
| 1298 | return 0; |
| 1299 | } |
| 1300 | #endif |
| 1301 | |
Sachin Kamat | 464d8a5 | 2013-06-27 12:45:17 +0530 | [diff] [blame] | 1302 | static int __init i740fb_init(void) |
Ondrej Zary | 5350c65 | 2012-02-10 18:59:17 +0100 | [diff] [blame] | 1303 | { |
| 1304 | #ifndef MODULE |
| 1305 | char *option = NULL; |
| 1306 | |
| 1307 | if (fb_get_options("i740fb", &option)) |
| 1308 | return -ENODEV; |
| 1309 | i740fb_setup(option); |
| 1310 | #endif |
| 1311 | |
| 1312 | return pci_register_driver(&i740fb_driver); |
| 1313 | } |
| 1314 | |
| 1315 | static void __exit i740fb_exit(void) |
| 1316 | { |
| 1317 | pci_unregister_driver(&i740fb_driver); |
| 1318 | } |
| 1319 | |
| 1320 | module_init(i740fb_init); |
| 1321 | module_exit(i740fb_exit); |
| 1322 | |
| 1323 | MODULE_AUTHOR("(c) 2011 Ondrej Zary <linux@rainbow-software.org>"); |
| 1324 | MODULE_LICENSE("GPL"); |
| 1325 | MODULE_DESCRIPTION("fbdev driver for Intel740"); |
| 1326 | |
| 1327 | module_param(mode_option, charp, 0444); |
| 1328 | MODULE_PARM_DESC(mode_option, "Default video mode ('640x480-8@60', etc)"); |
| 1329 | |
| 1330 | #ifdef CONFIG_MTRR |
| 1331 | module_param(mtrr, int, 0444); |
| 1332 | MODULE_PARM_DESC(mtrr, "Enable write-combining with MTRR (1=enable, 0=disable, default=1)"); |
| 1333 | #endif |