blob: 2f178dbe3d87f5d624d467782c9237625ddada15 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * gl518sm.c - Part of lm_sensors, Linux kernel modules for hardware
3 * monitoring
4 * Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl> and
5 * Kyosti Malkki <kmalkki@cc.hut.fi>
6 * Copyright (C) 2004 Hong-Gunn Chew <hglinux@gunnet.org> and
7 * Jean Delvare <khali@linux-fr.org>
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
22 *
23 * Ported to Linux 2.6 by Hong-Gunn Chew with the help of Jean Delvare
24 * and advice of Greg Kroah-Hartman.
25 *
26 * Notes about the port:
27 * Release 0x00 of the GL518SM chipset doesn't support reading of in0,
28 * in1 nor in2. The original driver had an ugly workaround to get them
29 * anyway (changing limits and watching alarms trigger and wear off).
30 * We did not keep that part of the original driver in the Linux 2.6
31 * version, since it was making the driver significantly more complex
32 * with no real benefit.
33 *
34 * History:
35 * 2004-01-28 Original port. (Hong-Gunn Chew)
36 * 2004-01-31 Code review and approval. (Jean Delvare)
37 */
38
Linus Torvalds1da177e2005-04-16 15:20:36 -070039#include <linux/module.h>
40#include <linux/init.h>
41#include <linux/slab.h>
42#include <linux/jiffies.h>
43#include <linux/i2c.h>
Mark M. Hoffman943b0832005-07-15 21:39:18 -040044#include <linux/hwmon.h>
45#include <linux/err.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070046
47/* Addresses to scan */
48static unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END };
Linus Torvalds1da177e2005-04-16 15:20:36 -070049
50/* Insmod parameters */
Jean Delvaref4b50262005-07-31 21:49:03 +020051I2C_CLIENT_INSMOD_2(gl518sm_r00, gl518sm_r80);
Linus Torvalds1da177e2005-04-16 15:20:36 -070052
53/* Many GL518 constants specified below */
54
55/* The GL518 registers */
56#define GL518_REG_CHIP_ID 0x00
57#define GL518_REG_REVISION 0x01
58#define GL518_REG_VENDOR_ID 0x02
59#define GL518_REG_CONF 0x03
60#define GL518_REG_TEMP_IN 0x04
61#define GL518_REG_TEMP_MAX 0x05
62#define GL518_REG_TEMP_HYST 0x06
63#define GL518_REG_FAN_COUNT 0x07
64#define GL518_REG_FAN_LIMIT 0x08
65#define GL518_REG_VIN1_LIMIT 0x09
66#define GL518_REG_VIN2_LIMIT 0x0a
67#define GL518_REG_VIN3_LIMIT 0x0b
68#define GL518_REG_VDD_LIMIT 0x0c
69#define GL518_REG_VIN3 0x0d
70#define GL518_REG_MISC 0x0f
71#define GL518_REG_ALARM 0x10
72#define GL518_REG_MASK 0x11
73#define GL518_REG_INT 0x12
74#define GL518_REG_VIN2 0x13
75#define GL518_REG_VIN1 0x14
76#define GL518_REG_VDD 0x15
77
78
79/*
80 * Conversions. Rounding and limit checking is only done on the TO_REG
81 * variants. Note that you should be a bit careful with which arguments
82 * these macros are called: arguments may be evaluated more than once.
83 * Fixing this is just not worth it.
84 */
85
86#define RAW_FROM_REG(val) val
87
88#define BOOL_FROM_REG(val) ((val)?0:1)
89#define BOOL_TO_REG(val) ((val)?0:1)
90
91#define TEMP_TO_REG(val) (SENSORS_LIMIT(((((val)<0? \
92 (val)-500:(val)+500)/1000)+119),0,255))
93#define TEMP_FROM_REG(val) (((val) - 119) * 1000)
94
95static inline u8 FAN_TO_REG(long rpm, int div)
96{
97 long rpmdiv;
98 if (rpm == 0)
99 return 0;
100 rpmdiv = SENSORS_LIMIT(rpm, 1, 1920000) * div;
101 return SENSORS_LIMIT((960000 + rpmdiv / 2) / rpmdiv, 1, 255);
102}
103#define FAN_FROM_REG(val,div) ((val)==0 ? 0 : (960000/((val)*(div))))
104
105#define IN_TO_REG(val) (SENSORS_LIMIT((((val)+9)/19),0,255))
106#define IN_FROM_REG(val) ((val)*19)
107
108#define VDD_TO_REG(val) (SENSORS_LIMIT((((val)*4+47)/95),0,255))
109#define VDD_FROM_REG(val) (((val)*95+2)/4)
110
111#define DIV_TO_REG(val) ((val)==4?2:(val)==2?1:(val)==1?0:3)
112#define DIV_FROM_REG(val) (1 << (val))
113
114#define BEEP_MASK_TO_REG(val) ((val) & 0x7f & data->alarm_mask)
115#define BEEP_MASK_FROM_REG(val) ((val) & 0x7f)
116
117/* Each client has this additional data */
118struct gl518_data {
119 struct i2c_client client;
Mark M. Hoffman943b0832005-07-15 21:39:18 -0400120 struct class_device *class_dev;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700121 enum chips type;
122
123 struct semaphore update_lock;
124 char valid; /* !=0 if following fields are valid */
125 unsigned long last_updated; /* In jiffies */
126
127 u8 voltage_in[4]; /* Register values; [0] = VDD */
128 u8 voltage_min[4]; /* Register values; [0] = VDD */
129 u8 voltage_max[4]; /* Register values; [0] = VDD */
130 u8 iter_voltage_in[4]; /* Register values; [0] = VDD */
131 u8 fan_in[2];
132 u8 fan_min[2];
133 u8 fan_div[2]; /* Register encoding, shifted right */
134 u8 fan_auto1; /* Boolean */
135 u8 temp_in; /* Register values */
136 u8 temp_max; /* Register values */
137 u8 temp_hyst; /* Register values */
138 u8 alarms; /* Register value */
139 u8 alarm_mask; /* Register value */
140 u8 beep_mask; /* Register value */
141 u8 beep_enable; /* Boolean */
142};
143
144static int gl518_attach_adapter(struct i2c_adapter *adapter);
145static int gl518_detect(struct i2c_adapter *adapter, int address, int kind);
146static void gl518_init_client(struct i2c_client *client);
147static int gl518_detach_client(struct i2c_client *client);
148static int gl518_read_value(struct i2c_client *client, u8 reg);
149static int gl518_write_value(struct i2c_client *client, u8 reg, u16 value);
150static struct gl518_data *gl518_update_device(struct device *dev);
151
152/* This is the driver that will be inserted */
153static struct i2c_driver gl518_driver = {
154 .owner = THIS_MODULE,
155 .name = "gl518sm",
156 .id = I2C_DRIVERID_GL518,
157 .flags = I2C_DF_NOTIFY,
158 .attach_adapter = gl518_attach_adapter,
159 .detach_client = gl518_detach_client,
160};
161
162/*
163 * Sysfs stuff
164 */
165
166#define show(type, suffix, value) \
Yani Ioannou30f74292005-05-17 06:41:35 -0400167static ssize_t show_##suffix(struct device *dev, struct device_attribute *attr, char *buf) \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700168{ \
169 struct gl518_data *data = gl518_update_device(dev); \
170 return sprintf(buf, "%d\n", type##_FROM_REG(data->value)); \
171}
172
173#define show_fan(suffix, value, index) \
Yani Ioannou30f74292005-05-17 06:41:35 -0400174static ssize_t show_##suffix(struct device *dev, struct device_attribute *attr, char *buf) \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700175{ \
176 struct gl518_data *data = gl518_update_device(dev); \
177 return sprintf(buf, "%d\n", FAN_FROM_REG(data->value[index], \
178 DIV_FROM_REG(data->fan_div[index]))); \
179}
180
181show(TEMP, temp_input1, temp_in);
182show(TEMP, temp_max1, temp_max);
183show(TEMP, temp_hyst1, temp_hyst);
184show(BOOL, fan_auto1, fan_auto1);
185show_fan(fan_input1, fan_in, 0);
186show_fan(fan_input2, fan_in, 1);
187show_fan(fan_min1, fan_min, 0);
188show_fan(fan_min2, fan_min, 1);
189show(DIV, fan_div1, fan_div[0]);
190show(DIV, fan_div2, fan_div[1]);
191show(VDD, in_input0, voltage_in[0]);
192show(IN, in_input1, voltage_in[1]);
193show(IN, in_input2, voltage_in[2]);
194show(IN, in_input3, voltage_in[3]);
195show(VDD, in_min0, voltage_min[0]);
196show(IN, in_min1, voltage_min[1]);
197show(IN, in_min2, voltage_min[2]);
198show(IN, in_min3, voltage_min[3]);
199show(VDD, in_max0, voltage_max[0]);
200show(IN, in_max1, voltage_max[1]);
201show(IN, in_max2, voltage_max[2]);
202show(IN, in_max3, voltage_max[3]);
203show(RAW, alarms, alarms);
204show(BOOL, beep_enable, beep_enable);
205show(BEEP_MASK, beep_mask, beep_mask);
206
207#define set(type, suffix, value, reg) \
Yani Ioannou30f74292005-05-17 06:41:35 -0400208static ssize_t set_##suffix(struct device *dev, struct device_attribute *attr, const char *buf, \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700209 size_t count) \
210{ \
211 struct i2c_client *client = to_i2c_client(dev); \
212 struct gl518_data *data = i2c_get_clientdata(client); \
213 long val = simple_strtol(buf, NULL, 10); \
214 \
215 down(&data->update_lock); \
216 data->value = type##_TO_REG(val); \
217 gl518_write_value(client, reg, data->value); \
218 up(&data->update_lock); \
219 return count; \
220}
221
222#define set_bits(type, suffix, value, reg, mask, shift) \
Yani Ioannou30f74292005-05-17 06:41:35 -0400223static ssize_t set_##suffix(struct device *dev, struct device_attribute *attr, const char *buf, \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700224 size_t count) \
225{ \
226 struct i2c_client *client = to_i2c_client(dev); \
227 struct gl518_data *data = i2c_get_clientdata(client); \
228 int regvalue; \
229 unsigned long val = simple_strtoul(buf, NULL, 10); \
230 \
231 down(&data->update_lock); \
232 regvalue = gl518_read_value(client, reg); \
233 data->value = type##_TO_REG(val); \
234 regvalue = (regvalue & ~mask) | (data->value << shift); \
235 gl518_write_value(client, reg, regvalue); \
236 up(&data->update_lock); \
237 return count; \
238}
239
240#define set_low(type, suffix, value, reg) \
241 set_bits(type, suffix, value, reg, 0x00ff, 0)
242#define set_high(type, suffix, value, reg) \
243 set_bits(type, suffix, value, reg, 0xff00, 8)
244
245set(TEMP, temp_max1, temp_max, GL518_REG_TEMP_MAX);
246set(TEMP, temp_hyst1, temp_hyst, GL518_REG_TEMP_HYST);
247set_bits(BOOL, fan_auto1, fan_auto1, GL518_REG_MISC, 0x08, 3);
248set_bits(DIV, fan_div1, fan_div[0], GL518_REG_MISC, 0xc0, 6);
249set_bits(DIV, fan_div2, fan_div[1], GL518_REG_MISC, 0x30, 4);
250set_low(VDD, in_min0, voltage_min[0], GL518_REG_VDD_LIMIT);
251set_low(IN, in_min1, voltage_min[1], GL518_REG_VIN1_LIMIT);
252set_low(IN, in_min2, voltage_min[2], GL518_REG_VIN2_LIMIT);
253set_low(IN, in_min3, voltage_min[3], GL518_REG_VIN3_LIMIT);
254set_high(VDD, in_max0, voltage_max[0], GL518_REG_VDD_LIMIT);
255set_high(IN, in_max1, voltage_max[1], GL518_REG_VIN1_LIMIT);
256set_high(IN, in_max2, voltage_max[2], GL518_REG_VIN2_LIMIT);
257set_high(IN, in_max3, voltage_max[3], GL518_REG_VIN3_LIMIT);
258set_bits(BOOL, beep_enable, beep_enable, GL518_REG_CONF, 0x04, 2);
259set(BEEP_MASK, beep_mask, beep_mask, GL518_REG_ALARM);
260
Yani Ioannou30f74292005-05-17 06:41:35 -0400261static ssize_t set_fan_min1(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700262{
263 struct i2c_client *client = to_i2c_client(dev);
264 struct gl518_data *data = i2c_get_clientdata(client);
265 int regvalue;
266 unsigned long val = simple_strtoul(buf, NULL, 10);
267
268 down(&data->update_lock);
269 regvalue = gl518_read_value(client, GL518_REG_FAN_LIMIT);
270 data->fan_min[0] = FAN_TO_REG(val,
271 DIV_FROM_REG(data->fan_div[0]));
272 regvalue = (regvalue & 0x00ff) | (data->fan_min[0] << 8);
273 gl518_write_value(client, GL518_REG_FAN_LIMIT, regvalue);
274
275 data->beep_mask = gl518_read_value(client, GL518_REG_ALARM);
276 if (data->fan_min[0] == 0)
277 data->alarm_mask &= ~0x20;
278 else
279 data->alarm_mask |= 0x20;
280 data->beep_mask &= data->alarm_mask;
281 gl518_write_value(client, GL518_REG_ALARM, data->beep_mask);
282
283 up(&data->update_lock);
284 return count;
285}
286
Yani Ioannou30f74292005-05-17 06:41:35 -0400287static ssize_t set_fan_min2(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700288{
289 struct i2c_client *client = to_i2c_client(dev);
290 struct gl518_data *data = i2c_get_clientdata(client);
291 int regvalue;
292 unsigned long val = simple_strtoul(buf, NULL, 10);
293
294 down(&data->update_lock);
295 regvalue = gl518_read_value(client, GL518_REG_FAN_LIMIT);
296 data->fan_min[1] = FAN_TO_REG(val,
297 DIV_FROM_REG(data->fan_div[1]));
298 regvalue = (regvalue & 0xff00) | data->fan_min[1];
299 gl518_write_value(client, GL518_REG_FAN_LIMIT, regvalue);
300
301 data->beep_mask = gl518_read_value(client, GL518_REG_ALARM);
302 if (data->fan_min[1] == 0)
303 data->alarm_mask &= ~0x40;
304 else
305 data->alarm_mask |= 0x40;
306 data->beep_mask &= data->alarm_mask;
307 gl518_write_value(client, GL518_REG_ALARM, data->beep_mask);
308
309 up(&data->update_lock);
310 return count;
311}
312
313static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input1, NULL);
314static DEVICE_ATTR(temp1_max, S_IWUSR|S_IRUGO, show_temp_max1, set_temp_max1);
315static DEVICE_ATTR(temp1_max_hyst, S_IWUSR|S_IRUGO,
316 show_temp_hyst1, set_temp_hyst1);
317static DEVICE_ATTR(fan1_auto, S_IWUSR|S_IRUGO, show_fan_auto1, set_fan_auto1);
318static DEVICE_ATTR(fan1_input, S_IRUGO, show_fan_input1, NULL);
319static DEVICE_ATTR(fan2_input, S_IRUGO, show_fan_input2, NULL);
320static DEVICE_ATTR(fan1_min, S_IWUSR|S_IRUGO, show_fan_min1, set_fan_min1);
321static DEVICE_ATTR(fan2_min, S_IWUSR|S_IRUGO, show_fan_min2, set_fan_min2);
322static DEVICE_ATTR(fan1_div, S_IWUSR|S_IRUGO, show_fan_div1, set_fan_div1);
323static DEVICE_ATTR(fan2_div, S_IWUSR|S_IRUGO, show_fan_div2, set_fan_div2);
324static DEVICE_ATTR(in0_input, S_IRUGO, show_in_input0, NULL);
325static DEVICE_ATTR(in1_input, S_IRUGO, show_in_input1, NULL);
326static DEVICE_ATTR(in2_input, S_IRUGO, show_in_input2, NULL);
327static DEVICE_ATTR(in3_input, S_IRUGO, show_in_input3, NULL);
328static DEVICE_ATTR(in0_min, S_IWUSR|S_IRUGO, show_in_min0, set_in_min0);
329static DEVICE_ATTR(in1_min, S_IWUSR|S_IRUGO, show_in_min1, set_in_min1);
330static DEVICE_ATTR(in2_min, S_IWUSR|S_IRUGO, show_in_min2, set_in_min2);
331static DEVICE_ATTR(in3_min, S_IWUSR|S_IRUGO, show_in_min3, set_in_min3);
332static DEVICE_ATTR(in0_max, S_IWUSR|S_IRUGO, show_in_max0, set_in_max0);
333static DEVICE_ATTR(in1_max, S_IWUSR|S_IRUGO, show_in_max1, set_in_max1);
334static DEVICE_ATTR(in2_max, S_IWUSR|S_IRUGO, show_in_max2, set_in_max2);
335static DEVICE_ATTR(in3_max, S_IWUSR|S_IRUGO, show_in_max3, set_in_max3);
336static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
337static DEVICE_ATTR(beep_enable, S_IWUSR|S_IRUGO,
338 show_beep_enable, set_beep_enable);
339static DEVICE_ATTR(beep_mask, S_IWUSR|S_IRUGO,
340 show_beep_mask, set_beep_mask);
341
342/*
343 * Real code
344 */
345
346static int gl518_attach_adapter(struct i2c_adapter *adapter)
347{
348 if (!(adapter->class & I2C_CLASS_HWMON))
349 return 0;
Jean Delvare2ed2dc32005-07-31 21:42:02 +0200350 return i2c_probe(adapter, &addr_data, gl518_detect);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700351}
352
353static int gl518_detect(struct i2c_adapter *adapter, int address, int kind)
354{
355 int i;
356 struct i2c_client *new_client;
357 struct gl518_data *data;
358 int err = 0;
359
360 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
361 I2C_FUNC_SMBUS_WORD_DATA))
362 goto exit;
363
364 /* OK. For now, we presume we have a valid client. We now create the
365 client structure, even though we cannot fill it completely yet.
366 But it allows us to access gl518_{read,write}_value. */
367
Deepak Saxenaba9c2e82005-10-17 23:08:32 +0200368 if (!(data = kzalloc(sizeof(struct gl518_data), GFP_KERNEL))) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700369 err = -ENOMEM;
370 goto exit;
371 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700372
373 new_client = &data->client;
374 i2c_set_clientdata(new_client, data);
375
376 new_client->addr = address;
377 new_client->adapter = adapter;
378 new_client->driver = &gl518_driver;
379 new_client->flags = 0;
380
381 /* Now, we do the remaining detection. */
382
383 if (kind < 0) {
384 if ((gl518_read_value(new_client, GL518_REG_CHIP_ID) != 0x80)
385 || (gl518_read_value(new_client, GL518_REG_CONF) & 0x80))
386 goto exit_free;
387 }
388
389 /* Determine the chip type. */
390 if (kind <= 0) {
391 i = gl518_read_value(new_client, GL518_REG_REVISION);
392 if (i == 0x00) {
393 kind = gl518sm_r00;
394 } else if (i == 0x80) {
395 kind = gl518sm_r80;
396 } else {
397 if (kind <= 0)
398 dev_info(&adapter->dev,
399 "Ignoring 'force' parameter for unknown "
400 "chip at adapter %d, address 0x%02x\n",
401 i2c_adapter_id(adapter), address);
402 goto exit_free;
403 }
404 }
405
406 /* Fill in the remaining client fields */
407 strlcpy(new_client->name, "gl518sm", I2C_NAME_SIZE);
408 data->type = kind;
409 data->valid = 0;
410 init_MUTEX(&data->update_lock);
411
412 /* Tell the I2C layer a new client has arrived */
413 if ((err = i2c_attach_client(new_client)))
414 goto exit_free;
415
416 /* Initialize the GL518SM chip */
417 data->alarm_mask = 0xff;
418 data->voltage_in[0]=data->voltage_in[1]=data->voltage_in[2]=0;
419 gl518_init_client((struct i2c_client *) new_client);
420
421 /* Register sysfs hooks */
Mark M. Hoffman943b0832005-07-15 21:39:18 -0400422 data->class_dev = hwmon_device_register(&new_client->dev);
423 if (IS_ERR(data->class_dev)) {
424 err = PTR_ERR(data->class_dev);
425 goto exit_detach;
426 }
427
Linus Torvalds1da177e2005-04-16 15:20:36 -0700428 device_create_file(&new_client->dev, &dev_attr_in0_input);
429 device_create_file(&new_client->dev, &dev_attr_in1_input);
430 device_create_file(&new_client->dev, &dev_attr_in2_input);
431 device_create_file(&new_client->dev, &dev_attr_in3_input);
432 device_create_file(&new_client->dev, &dev_attr_in0_min);
433 device_create_file(&new_client->dev, &dev_attr_in1_min);
434 device_create_file(&new_client->dev, &dev_attr_in2_min);
435 device_create_file(&new_client->dev, &dev_attr_in3_min);
436 device_create_file(&new_client->dev, &dev_attr_in0_max);
437 device_create_file(&new_client->dev, &dev_attr_in1_max);
438 device_create_file(&new_client->dev, &dev_attr_in2_max);
439 device_create_file(&new_client->dev, &dev_attr_in3_max);
440 device_create_file(&new_client->dev, &dev_attr_fan1_auto);
441 device_create_file(&new_client->dev, &dev_attr_fan1_input);
442 device_create_file(&new_client->dev, &dev_attr_fan2_input);
443 device_create_file(&new_client->dev, &dev_attr_fan1_min);
444 device_create_file(&new_client->dev, &dev_attr_fan2_min);
445 device_create_file(&new_client->dev, &dev_attr_fan1_div);
446 device_create_file(&new_client->dev, &dev_attr_fan2_div);
447 device_create_file(&new_client->dev, &dev_attr_temp1_input);
448 device_create_file(&new_client->dev, &dev_attr_temp1_max);
449 device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst);
450 device_create_file(&new_client->dev, &dev_attr_alarms);
451 device_create_file(&new_client->dev, &dev_attr_beep_enable);
452 device_create_file(&new_client->dev, &dev_attr_beep_mask);
453
454 return 0;
455
456/* OK, this is not exactly good programming practice, usually. But it is
457 very code-efficient in this case. */
458
Mark M. Hoffman943b0832005-07-15 21:39:18 -0400459exit_detach:
460 i2c_detach_client(new_client);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700461exit_free:
462 kfree(data);
463exit:
464 return err;
465}
466
467
468/* Called when we have found a new GL518SM.
469 Note that we preserve D4:NoFan2 and D2:beep_enable. */
470static void gl518_init_client(struct i2c_client *client)
471{
472 /* Make sure we leave D7:Reset untouched */
473 u8 regvalue = gl518_read_value(client, GL518_REG_CONF) & 0x7f;
474
475 /* Comparator mode (D3=0), standby mode (D6=0) */
476 gl518_write_value(client, GL518_REG_CONF, (regvalue &= 0x37));
477
478 /* Never interrupts */
479 gl518_write_value(client, GL518_REG_MASK, 0x00);
480
481 /* Clear status register (D5=1), start (D6=1) */
482 gl518_write_value(client, GL518_REG_CONF, 0x20 | regvalue);
483 gl518_write_value(client, GL518_REG_CONF, 0x40 | regvalue);
484}
485
486static int gl518_detach_client(struct i2c_client *client)
487{
Mark M. Hoffman943b0832005-07-15 21:39:18 -0400488 struct gl518_data *data = i2c_get_clientdata(client);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700489 int err;
490
Mark M. Hoffman943b0832005-07-15 21:39:18 -0400491 hwmon_device_unregister(data->class_dev);
492
Jean Delvare7bef5592005-07-27 22:14:49 +0200493 if ((err = i2c_detach_client(client)))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700494 return err;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700495
Mark M. Hoffman943b0832005-07-15 21:39:18 -0400496 kfree(data);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700497 return 0;
498}
499
500/* Registers 0x07 to 0x0c are word-sized, others are byte-sized
501 GL518 uses a high-byte first convention, which is exactly opposite to
502 the usual practice. */
503static int gl518_read_value(struct i2c_client *client, u8 reg)
504{
505 if ((reg >= 0x07) && (reg <= 0x0c))
506 return swab16(i2c_smbus_read_word_data(client, reg));
507 else
508 return i2c_smbus_read_byte_data(client, reg);
509}
510
511/* Registers 0x07 to 0x0c are word-sized, others are byte-sized
512 GL518 uses a high-byte first convention, which is exactly opposite to
513 the usual practice. */
514static int gl518_write_value(struct i2c_client *client, u8 reg, u16 value)
515{
516 if ((reg >= 0x07) && (reg <= 0x0c))
517 return i2c_smbus_write_word_data(client, reg, swab16(value));
518 else
519 return i2c_smbus_write_byte_data(client, reg, value);
520}
521
522static struct gl518_data *gl518_update_device(struct device *dev)
523{
524 struct i2c_client *client = to_i2c_client(dev);
525 struct gl518_data *data = i2c_get_clientdata(client);
526 int val;
527
528 down(&data->update_lock);
529
530 if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
531 || !data->valid) {
532 dev_dbg(&client->dev, "Starting gl518 update\n");
533
534 data->alarms = gl518_read_value(client, GL518_REG_INT);
535 data->beep_mask = gl518_read_value(client, GL518_REG_ALARM);
536
537 val = gl518_read_value(client, GL518_REG_VDD_LIMIT);
538 data->voltage_min[0] = val & 0xff;
539 data->voltage_max[0] = (val >> 8) & 0xff;
540 val = gl518_read_value(client, GL518_REG_VIN1_LIMIT);
541 data->voltage_min[1] = val & 0xff;
542 data->voltage_max[1] = (val >> 8) & 0xff;
543 val = gl518_read_value(client, GL518_REG_VIN2_LIMIT);
544 data->voltage_min[2] = val & 0xff;
545 data->voltage_max[2] = (val >> 8) & 0xff;
546 val = gl518_read_value(client, GL518_REG_VIN3_LIMIT);
547 data->voltage_min[3] = val & 0xff;
548 data->voltage_max[3] = (val >> 8) & 0xff;
549
550 val = gl518_read_value(client, GL518_REG_FAN_COUNT);
551 data->fan_in[0] = (val >> 8) & 0xff;
552 data->fan_in[1] = val & 0xff;
553
554 val = gl518_read_value(client, GL518_REG_FAN_LIMIT);
555 data->fan_min[0] = (val >> 8) & 0xff;
556 data->fan_min[1] = val & 0xff;
557
558 data->temp_in = gl518_read_value(client, GL518_REG_TEMP_IN);
559 data->temp_max =
560 gl518_read_value(client, GL518_REG_TEMP_MAX);
561 data->temp_hyst =
562 gl518_read_value(client, GL518_REG_TEMP_HYST);
563
564 val = gl518_read_value(client, GL518_REG_MISC);
565 data->fan_div[0] = (val >> 6) & 0x03;
566 data->fan_div[1] = (val >> 4) & 0x03;
567 data->fan_auto1 = (val >> 3) & 0x01;
568
569 data->alarms &= data->alarm_mask;
570
571 val = gl518_read_value(client, GL518_REG_CONF);
572 data->beep_enable = (val >> 2) & 1;
573
574 if (data->type != gl518sm_r00) {
575 data->voltage_in[0] =
576 gl518_read_value(client, GL518_REG_VDD);
577 data->voltage_in[1] =
578 gl518_read_value(client, GL518_REG_VIN1);
579 data->voltage_in[2] =
580 gl518_read_value(client, GL518_REG_VIN2);
581 }
582 data->voltage_in[3] =
583 gl518_read_value(client, GL518_REG_VIN3);
584
585 data->last_updated = jiffies;
586 data->valid = 1;
587 }
588
589 up(&data->update_lock);
590
591 return data;
592}
593
594static int __init sensors_gl518sm_init(void)
595{
596 return i2c_add_driver(&gl518_driver);
597}
598
599static void __exit sensors_gl518sm_exit(void)
600{
601 i2c_del_driver(&gl518_driver);
602}
603
604MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
605 "Kyosti Malkki <kmalkki@cc.hut.fi> and "
606 "Hong-Gunn Chew <hglinux@gunnet.org>");
607MODULE_DESCRIPTION("GL518SM driver");
608MODULE_LICENSE("GPL");
609
610module_init(sensors_gl518sm_init);
611module_exit(sensors_gl518sm_exit);