blob: 6a3aa95e9bfd9e562cf2c1a0b5cb84997ef623c6 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001Brutus is an evaluation platform for the SA1100 manufactured by Intel.
2For more details, see:
3
Justin P. Mattock0ea6e612010-07-23 20:51:24 -07004http://developer.intel.com
Linus Torvalds1da177e2005-04-16 15:20:36 -07005
6To compile for Brutus, you must issue the following commands:
7
8 make brutus_config
9 make config
10 [accept all the defaults]
11 make zImage
12
13The resulting kernel will end up in linux/arch/arm/boot/zImage. This file
14must be loaded at 0xc0008000 in Brutus's memory and execution started at
150xc0008000 as well with the value of registers r0 = 0 and r1 = 16 upon
16entry.
17
18But prior to execute the kernel, a ramdisk image must also be loaded in
19memory. Use memory address 0xd8000000 for this. Note that the file
20containing the (compressed) ramdisk image must not exceed 4 MB.
21
22Typically, you'll need angelboot to load the kernel.
23The following angelboot.opt file should be used:
24
25----- begin angelboot.opt -----
26base 0xc0008000
27entry 0xc0008000
28r0 0x00000000
29r1 0x00000010
30device /dev/ttyS0
31options "9600 8N1"
32baud 115200
33otherfile ramdisk_img.gz
34otherbase 0xd8000000
35----- end angelboot.opt -----
36
37Then load the kernel and ramdisk with:
38
39 angelboot -f angelboot.opt zImage
40
41The first Brutus serial port (assumed to be linked to /dev/ttyS0 on your
42host PC) is used by angel to load the kernel and ramdisk image. The serial
43console is provided through the second Brutus serial port. To access it,
44you may use minicom configured with /dev/ttyS1, 9600 baud, 8N1, no flow
45control.
46
47Currently supported:
48 - RS232 serial ports
49 - audio output
50 - LCD screen
51 - keyboard
52
53The actual Brutus support may not be complete without extra patches.
54If such patches exist, they should be found from
55ftp.netwinder.org/users/n/nico.
56
57A full PCMCIA support is still missing, although it's possible to hack
58some drivers in order to drive already inserted cards at boot time with
59little modifications.
60
61Any contribution is welcome.
62
Nicolas Pitre2f82af02009-09-14 03:25:28 -040063Please send patches to nico@fluxnic.net
Linus Torvalds1da177e2005-04-16 15:20:36 -070064
65Have Fun !
66