include/linux/firewire-cdev.h

/*
 * Char device interface.
 *
 * Copyright (C) 2005-2007  Kristian Hoegsberg <krh@bitplanet.net>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice (including the next
 * paragraph) shall be included in all copies or substantial portions of the
 * Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
 * DEALINGS IN THE SOFTWARE.
 */

#ifndef _LINUX_FIREWIRE_CDEV_H
#define _LINUX_FIREWIRE_CDEV_H

#include <linux/ioctl.h>
#include <linux/types.h>
#include <linux/firewire-constants.h>

#define FW_CDEV_EVENT_BUS_RESET				0x00
#define FW_CDEV_EVENT_RESPONSE				0x01
#define FW_CDEV_EVENT_REQUEST				0x02
#define FW_CDEV_EVENT_ISO_INTERRUPT			0x03
#define FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED		0x04
#define FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED		0x05

/* available since kernel version 2.6.36 */
#define FW_CDEV_EVENT_REQUEST2				0x06
#define FW_CDEV_EVENT_PHY_PACKET_SENT			0x07
#define FW_CDEV_EVENT_PHY_PACKET_RECEIVED		0x08
#define FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL	0x09

/**
 * struct fw_cdev_event_common - Common part of all fw_cdev_event_ types
 * @closure:	For arbitrary use by userspace
 * @type:	Discriminates the fw_cdev_event_ types
 *
 * This struct may be used to access generic members of all fw_cdev_event_
 * types regardless of the specific type.
 *
 * Data passed in the @closure field for a request will be returned in the
 * corresponding event.  It is big enough to hold a pointer on all platforms.
 * The ioctl used to set @closure depends on the @type of event.
 */
struct fw_cdev_event_common {
	__u64 closure;
	__u32 type;
};

/**
 * struct fw_cdev_event_bus_reset - Sent when a bus reset occurred
 * @closure:	See &fw_cdev_event_common; set by %FW_CDEV_IOC_GET_INFO ioctl
 * @type:	See &fw_cdev_event_common; always %FW_CDEV_EVENT_BUS_RESET
 * @node_id:       New node ID of this node
 * @local_node_id: Node ID of the local node, i.e. of the controller
 * @bm_node_id:    Node ID of the bus manager
 * @irm_node_id:   Node ID of the iso resource manager
 * @root_node_id:  Node ID of the root node
 * @generation:    New bus generation
 *
 * This event is sent when the bus the device belongs to goes through a bus
 * reset.  It provides information about the new bus configuration, such as
 * new node ID for this device, new root ID, and others.
 *
 * If @bm_node_id is 0xffff right after bus reset it can be reread by an
 * %FW_CDEV_IOC_GET_INFO ioctl after bus manager selection was finished.
 * Kernels with ABI version < 4 do not set @bm_node_id.
 */
struct fw_cdev_event_bus_reset {
	__u64 closure;
	__u32 type;
	__u32 node_id;
	__u32 local_node_id;
	__u32 bm_node_id;
	__u32 irm_node_id;
	__u32 root_node_id;
	__u32 generation;
};

/**
 * struct fw_cdev_event_response - Sent when a response packet was received
 * @closure:	See &fw_cdev_event_common; set by %FW_CDEV_IOC_SEND_REQUEST
 *		or %FW_CDEV_IOC_SEND_BROADCAST_REQUEST
 *		or %FW_CDEV_IOC_SEND_STREAM_PACKET ioctl
 * @type:	See &fw_cdev_event_common; always %FW_CDEV_EVENT_RESPONSE
 * @rcode:	Response code returned by the remote node
 * @length:	Data length, i.e. the response's payload size in bytes
 * @data:	Payload data, if any
 *
 * This event is sent when the stack receives a response to an outgoing request
 * sent by %FW_CDEV_IOC_SEND_REQUEST ioctl.  The payload data for responses
 * carrying data (read and lock responses) follows immediately and can be
 * accessed through the @data field.
 *
 * The event is also generated after conclusions of transactions that do not
 * involve response packets.  This includes unified write transactions,
 * broadcast write transactions, and transmission of asynchronous stream
 * packets.  @rcode indicates success or failure of such transmissions.
 */
struct fw_cdev_event_response {
	__u64 closure;
	__u32 type;
	__u32 rcode;
	__u32 length;
	__u32 data[0];
};

/**
 * struct fw_cdev_event_request - Old version of &fw_cdev_event_request2
 * @closure:	See &fw_cdev_event_common; set by %FW_CDEV_IOC_ALLOCATE ioctl
 * @type:	See &fw_cdev_event_common; always %FW_CDEV_EVENT_REQUEST
 * @tcode:	See &fw_cdev_event_request2
 * @offset:	See &fw_cdev_event_request2
 * @handle:	See &fw_cdev_event_request2
 * @length:	See &fw_cdev_event_request2
 * @data:	See &fw_cdev_event_request2
 *
 * This event is sent instead of &fw_cdev_event_request2 if the kernel or
 * the client implements ABI version <= 3.
 *
 * Unlike &fw_cdev_event_request2, the sender identity cannot be established,
 * broadcast write requests cannot be distinguished from unicast writes, and
 * @tcode of lock requests is %TCODE_LOCK_REQUEST.
 *
 * Requests to the FCP_REQUEST or FCP_RESPONSE register are responded to as
 * with &fw_cdev_event_request2, except in kernel 2.6.32 and older which send
 * the response packet of the client's %FW_CDEV_IOC_SEND_RESPONSE ioctl.
 */
struct fw_cdev_event_request {
	__u64 closure;
	__u32 type;
	__u32 tcode;
	__u64 offset;
	__u32 handle;
	__u32 length;
	__u32 data[0];
};

/**
 * struct fw_cdev_event_request2 - Sent on incoming request to an address region
 * @closure:	See &fw_cdev_event_common; set by %FW_CDEV_IOC_ALLOCATE ioctl
 * @type:	See &fw_cdev_event_common; always %FW_CDEV_EVENT_REQUEST2
 * @tcode:	Transaction code of the incoming request
 * @offset:	The offset into the 48-bit per-node address space
 * @source_node_id: Sender node ID
 * @destination_node_id: Destination node ID
 * @card:	The index of the card from which the request came
 * @generation:	Bus generation in which the request is valid
 * @handle:	Reference to the kernel-side pending request
 * @length:	Data length, i.e. the request's payload size in bytes
 * @data:	Incoming data, if any
 *
 * This event is sent when the stack receives an incoming request to an address
 * region registered using the %FW_CDEV_IOC_ALLOCATE ioctl.  The request is
 * guaranteed to be completely contained in the specified region.  Userspace is
 * responsible for sending the response by %FW_CDEV_IOC_SEND_RESPONSE ioctl,
 * using the same @handle.
 *
 * The payload data for requests carrying data (write and lock requests)
 * follows immediately and can be accessed through the @data field.
 *
 * Unlike &fw_cdev_event_request, @tcode of lock requests is one of the
 * firewire-core specific %TCODE_LOCK_MASK_SWAP...%TCODE_LOCK_VENDOR_DEPENDENT,
 * i.e. encodes the extended transaction code.
 *
 * @card may differ from &fw_cdev_get_info.card because requests are received
 * from all cards of the Linux host.  @source_node_id, @destination_node_id, and
 * @generation pertain to that card.  Destination node ID and bus generation may
 * therefore differ from the corresponding fields of the last
 * &fw_cdev_event_bus_reset.
 *
 * @destination_node_id may also differ from the current node ID because of a
 * non-local bus ID part or in case of a broadcast write request.  Note, a
 * client must call an %FW_CDEV_IOC_SEND_RESPONSE ioctl even in case of a
 * broadcast write request; the kernel will then release the kernel-side pending
 * request but will not actually send a response packet.
 *
 * In case of a write request to FCP_REQUEST or FCP_RESPONSE, the kernel already
 * sent a write response immediately after the request was received; in this
 * case the client must still call an %FW_CDEV_IOC_SEND_RESPONSE ioctl to
 * release the kernel-side pending request, though another response won't be
 * sent.
 *
 * If the client subsequently needs to initiate requests to the sender node of
 * an &fw_cdev_event_request2, it needs to use a device file with matching
 * card index, node ID, and generation for outbound requests.
 */
struct fw_cdev_event_request2 {
	__u64 closure;
	__u32 type;
	__u32 tcode;
	__u64 offset;
	__u32 source_node_id;
	__u32 destination_node_id;
	__u32 card;
	__u32 generation;
	__u32 handle;
	__u32 length;
	__u32 data[0];
};

/**
 * struct fw_cdev_event_iso_interrupt - Sent when an iso packet was completed
 * @closure:	See &fw_cdev_event_common;
 *		set by %FW_CDEV_CREATE_ISO_CONTEXT ioctl
 * @type:	See &fw_cdev_event_common; always %FW_CDEV_EVENT_ISO_INTERRUPT
 * @cycle:	Cycle counter of the interrupt packet
 * @header_length: Total length of following headers, in bytes
 * @header:	Stripped headers, if any
 *
 * This event is sent when the controller has completed an &fw_cdev_iso_packet
 * with the %FW_CDEV_ISO_INTERRUPT bit set.
 *
 * Isochronous transmit events (context type %FW_CDEV_ISO_CONTEXT_TRANSMIT):
 *
 * In version 3 and some implementations of version 2 of the ABI, &header_length
 * is a multiple of 4 and &header contains timestamps of all packets up until
 * the interrupt packet.  The format of the timestamps is as described below for
 * isochronous reception.  In version 1 of the ABI, &header_length was 0.
 *
 * Isochronous receive events (context type %FW_CDEV_ISO_CONTEXT_RECEIVE):
 *
 * The headers stripped of all packets up until and including the interrupt
 * packet are returned in the @header field.  The amount of header data per
 * packet is as specified at iso context creation by
 * &fw_cdev_create_iso_context.header_size.
 *
 * Hence, _interrupt.header_length / _context.header_size is the number of
 * packets received in this interrupt event.  The client can now iterate
 * through the mmap()'ed DMA buffer according to this number of packets and
 * to the buffer sizes as the client specified in &fw_cdev_queue_iso.
 *
 * Since version 2 of this ABI, the portion for each packet in _interrupt.header
 * consists of the 1394 isochronous packet header, followed by a timestamp
 * quadlet if &fw_cdev_create_iso_context.header_size > 4, followed by quadlets
 * from the packet payload if &fw_cdev_create_iso_context.header_size > 8.
 *
 * Format of 1394 iso packet header:  16 bits data_length, 2 bits tag, 6 bits
 * channel, 4 bits tcode, 4 bits sy, in big endian byte order.
 * data_length is the actual received size of the packet without the four
 * 1394 iso packet header bytes.
 *
 * Format of timestamp:  16 bits invalid, 3 bits cycleSeconds, 13 bits
 * cycleCount, in big endian byte order.
 *
 * In version 1 of the ABI, no timestamp quadlet was inserted; instead, payload
 * data followed directly after the 1394 is header if header_size > 4.
 * Behaviour of ver. 1 of this ABI is no longer available since ABI ver. 2.
 */
struct fw_cdev_event_iso_interrupt {
	__u64 closure;
	__u32 type;
	__u32 cycle;
	__u32 header_length;
	__u32 header[0];
};

/**
 * struct fw_cdev_event_iso_interrupt_mc - An iso buffer chunk was completed
 * @closure:	See &fw_cdev_event_common;
 *		set by %FW_CDEV_CREATE_ISO_CONTEXT ioctl
 * @type:	%FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL
 * @completed:	Offset into the receive buffer; data before this offset is valid
 *
 * This event is sent in multichannel contexts (context type
 * %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL) for &fw_cdev_iso_packet buffer
 * chunks that have the %FW_CDEV_ISO_INTERRUPT bit set.  Whether this happens
 * when a packet is completed and/or when a buffer chunk is completed depends
 * on the hardware implementation.
 *
 * The buffer is continuously filled with the following data, per packet:
 *  - the 1394 iso packet header as described at &fw_cdev_event_iso_interrupt,
 *    but in little endian byte order,
 *  - packet payload (as many bytes as specified in the data_length field of
 *    the 1394 iso packet header) in big endian byte order,
 *  - 0...3 padding bytes as needed to align the following trailer quadlet,
 *  - trailer quadlet, containing the reception timestamp as described at
 *    &fw_cdev_event_iso_interrupt, but in little endian byte order.
 *
 * Hence the per-packet size is data_length (rounded up to a multiple of 4) + 8.
 * When processing the data, stop before a packet that would cross the
 * @completed offset.
 *
 * A packet near the end of a buffer chunk will typically spill over into the
 * next queued buffer chunk.  It is the responsibility of the client to check
 * for this condition, assemble a broken-up packet from its parts, and not to
 * re-queue any buffer chunks in which as yet unread packet parts reside.
 */
struct fw_cdev_event_iso_interrupt_mc {
	__u64 closure;
	__u32 type;
	__u32 completed;
};

/**
 * struct fw_cdev_event_iso_resource - Iso resources were allocated or freed
 * @closure:	See &fw_cdev_event_common;
 *		set by %FW_CDEV_IOC_(DE)ALLOCATE_ISO_RESOURCE(_ONCE) ioctl
 * @type:	%FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED or
 *		%FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED
 * @handle:	Reference by which an allocated resource can be deallocated
 * @channel:	Isochronous channel which was (de)allocated, if any
 * @bandwidth:	Bandwidth allocation units which were (de)allocated, if any
 *
 * An %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED event is sent after an isochronous
 * resource was allocated at the IRM.  The client has to check @channel and
 * @bandwidth for whether the allocation actually succeeded.
 *
 * An %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event is sent after an isochronous
 * resource was deallocated at the IRM.  It is also sent when automatic
 * reallocation after a bus reset failed.
 *
 * @channel is <0 if no channel was (de)allocated or if reallocation failed.
 * @bandwidth is 0 if no bandwidth was (de)allocated or if reallocation failed.
 */
struct fw_cdev_event_iso_resource {
	__u64 closure;
	__u32 type;
	__u32 handle;
	__s32 channel;
	__s32 bandwidth;
};

/**
 * struct fw_cdev_event_phy_packet - A PHY packet was transmitted or received
 * @closure:	See &fw_cdev_event_common; set by %FW_CDEV_IOC_SEND_PHY_PACKET
 *		or %FW_CDEV_IOC_RECEIVE_PHY_PACKETS ioctl
 * @type:	%FW_CDEV_EVENT_PHY_PACKET_SENT or %..._RECEIVED
 * @rcode:	%RCODE_..., indicates success or failure of transmission
 * @length:	Data length in bytes
 * @data:	Incoming data
 *
 * If @type is %FW_CDEV_EVENT_PHY_PACKET_SENT, @length is 0 and @data empty,
 * except in case of a ping packet:  Then, @length is 4, and @data[0] is the
 * ping time in 49.152MHz clocks if @rcode is %RCODE_COMPLETE.
 *
 * If @type is %FW_CDEV_EVENT_PHY_PACKET_RECEIVED, @length is 8 and @data
 * consists of the two PHY packet quadlets, in host byte order.
 */
struct fw_cdev_event_phy_packet {
	__u64 closure;
	__u32 type;
	__u32 rcode;
	__u32 length;
	__u32 data[0];
};

/**
 * union fw_cdev_event - Convenience union of fw_cdev_event_ types
 * @common:		Valid for all types
 * @bus_reset:		Valid if @common.type == %FW_CDEV_EVENT_BUS_RESET
 * @response:		Valid if @common.type == %FW_CDEV_EVENT_RESPONSE
 * @request:		Valid if @common.type == %FW_CDEV_EVENT_REQUEST
 * @request2:		Valid if @common.type == %FW_CDEV_EVENT_REQUEST2
 * @iso_interrupt:	Valid if @common.type == %FW_CDEV_EVENT_ISO_INTERRUPT
 * @iso_interrupt_mc:	Valid if @common.type ==
 *				%FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL
 * @iso_resource:	Valid if @common.type ==
 *				%FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED or
 *				%FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED
 * @phy_packet:		Valid if @common.type ==
 *				%FW_CDEV_EVENT_PHY_PACKET_SENT or
 *				%FW_CDEV_EVENT_PHY_PACKET_RECEIVED
 *
 * Convenience union for userspace use.  Events could be read(2) into an
 * appropriately aligned char buffer and then cast to this union for further
 * processing.  Note that for a request, response or iso_interrupt event,
 * the data[] or header[] may make the size of the full event larger than
 * sizeof(union fw_cdev_event).  Also note that if you attempt to read(2)
 * an event into a buffer that is not large enough for it, the data that does
 * not fit will be discarded so that the next read(2) will return a new event.
 */
union fw_cdev_event {
	struct fw_cdev_event_common		common;
	struct fw_cdev_event_bus_reset		bus_reset;
	struct fw_cdev_event_response		response;
	struct fw_cdev_event_request		request;
	struct fw_cdev_event_request2		request2;		/* added in 2.6.36 */
	struct fw_cdev_event_iso_interrupt	iso_interrupt;
	struct fw_cdev_event_iso_interrupt_mc	iso_interrupt_mc;	/* added in 2.6.36 */
	struct fw_cdev_event_iso_resource	iso_resource;		/* added in 2.6.30 */
	struct fw_cdev_event_phy_packet		phy_packet;		/* added in 2.6.36 */
};

/* available since kernel version 2.6.22 */
#define FW_CDEV_IOC_GET_INFO           _IOWR('#', 0x00, struct fw_cdev_get_info)
#define FW_CDEV_IOC_SEND_REQUEST        _IOW('#', 0x01, struct fw_cdev_send_request)
#define FW_CDEV_IOC_ALLOCATE           _IOWR('#', 0x02, struct fw_cdev_allocate)
#define FW_CDEV_IOC_DEALLOCATE          _IOW('#', 0x03, struct fw_cdev_deallocate)
#define FW_CDEV_IOC_SEND_RESPONSE       _IOW('#', 0x04, struct fw_cdev_send_response)
#define FW_CDEV_IOC_INITIATE_BUS_RESET  _IOW('#', 0x05, struct fw_cdev_initiate_bus_reset)
#define FW_CDEV_IOC_ADD_DESCRIPTOR     _IOWR('#', 0x06, struct fw_cdev_add_descriptor)
#define FW_CDEV_IOC_REMOVE_DESCRIPTOR   _IOW('#', 0x07, struct fw_cdev_remove_descriptor)
#define FW_CDEV_IOC_CREATE_ISO_CONTEXT _IOWR('#', 0x08, struct fw_cdev_create_iso_context)
#define FW_CDEV_IOC_QUEUE_ISO          _IOWR('#', 0x09, struct fw_cdev_queue_iso)
#define FW_CDEV_IOC_START_ISO           _IOW('#', 0x0a, struct fw_cdev_start_iso)
#define FW_CDEV_IOC_STOP_ISO            _IOW('#', 0x0b, struct fw_cdev_stop_iso)

/* available since kernel version 2.6.24 */
#define FW_CDEV_IOC_GET_CYCLE_TIMER     _IOR('#', 0x0c, struct fw_cdev_get_cycle_timer)

/* available since kernel version 2.6.30 */
#define FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE       _IOWR('#', 0x0d, struct fw_cdev_allocate_iso_resource)
#define FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE      _IOW('#', 0x0e, struct fw_cdev_deallocate)
#define FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE   _IOW('#', 0x0f, struct fw_cdev_allocate_iso_resource)
#define FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE_ONCE _IOW('#', 0x10, struct fw_cdev_allocate_iso_resource)
#define FW_CDEV_IOC_GET_SPEED                     _IO('#', 0x11) /* returns speed code */
#define FW_CDEV_IOC_SEND_BROADCAST_REQUEST       _IOW('#', 0x12, struct fw_cdev_send_request)
#define FW_CDEV_IOC_SEND_STREAM_PACKET           _IOW('#', 0x13, struct fw_cdev_send_stream_packet)

/* available since kernel version 2.6.34 */
#define FW_CDEV_IOC_GET_CYCLE_TIMER2   _IOWR('#', 0x14, struct fw_cdev_get_cycle_timer2)

/* available since kernel version 2.6.36 */
#define FW_CDEV_IOC_SEND_PHY_PACKET    _IOWR('#', 0x15, struct fw_cdev_send_phy_packet)
#define FW_CDEV_IOC_RECEIVE_PHY_PACKETS _IOW('#', 0x16, struct fw_cdev_receive_phy_packets)
#define FW_CDEV_IOC_SET_ISO_CHANNELS    _IOW('#', 0x17, struct fw_cdev_set_iso_channels)

/*
 * ABI version history
 *  1  (2.6.22)  - initial version
 *     (2.6.24)  - added %FW_CDEV_IOC_GET_CYCLE_TIMER
 *  2  (2.6.30)  - changed &fw_cdev_event_iso_interrupt.header if
 *                 &fw_cdev_create_iso_context.header_size is 8 or more
 *               - added %FW_CDEV_IOC_*_ISO_RESOURCE*,
 *                 %FW_CDEV_IOC_GET_SPEED, %FW_CDEV_IOC_SEND_BROADCAST_REQUEST,
 *                 %FW_CDEV_IOC_SEND_STREAM_PACKET
 *     (2.6.32)  - added time stamp to xmit &fw_cdev_event_iso_interrupt
 *     (2.6.33)  - IR has always packet-per-buffer semantics now, not one of
 *                 dual-buffer or packet-per-buffer depending on hardware
 *               - shared use and auto-response for FCP registers
 *  3  (2.6.34)  - made &fw_cdev_get_cycle_timer reliable
 *               - added %FW_CDEV_IOC_GET_CYCLE_TIMER2
 *  4  (2.6.36)  - added %FW_CDEV_EVENT_REQUEST2, %FW_CDEV_EVENT_PHY_PACKET_*,
 *                 and &fw_cdev_allocate.region_end
 *               - implemented &fw_cdev_event_bus_reset.bm_node_id
 *               - added %FW_CDEV_IOC_SEND_PHY_PACKET, _RECEIVE_PHY_PACKETS
 *               - added %FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL,
 *                 %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL, and
 *                 %FW_CDEV_IOC_SET_ISO_CHANNELS
 */
#define FW_CDEV_VERSION 3 /* Meaningless; don't use this macro. */

/**
 * struct fw_cdev_get_info - General purpose information ioctl
 * @version:	The version field is just a running serial number.  Both an
 *		input parameter (ABI version implemented by the client) and
 *		output parameter (ABI version implemented by the kernel).
 *		A client must not fill in an %FW_CDEV_VERSION defined from an
 *		included kernel header file but the actual version for which
 *		the client was implemented.  This is necessary for forward
 *		compatibility.  We never break backwards compatibility, but
 *		may add more structs, events, and ioctls in later revisions.
 * @rom_length:	If @rom is non-zero, at most rom_length bytes of configuration
 *		ROM will be copied into that user space address.  In either
 *		case, @rom_length is updated with the actual length of the
 *		configuration ROM.
 * @rom:	If non-zero, address of a buffer to be filled by a copy of the
 *		device's configuration ROM
 * @bus_reset:	If non-zero, address of a buffer to be filled by a
 *		&struct fw_cdev_event_bus_reset with the current state
 *		of the bus.  This does not cause a bus reset to happen.
 * @bus_reset_closure: Value of &closure in this and subsequent bus reset events
 * @card:	The index of the card this device belongs to
 */
struct fw_cdev_get_info {
	__u32 version;
	__u32 rom_length;
	__u64 rom;
	__u64 bus_reset;
	__u64 bus_reset_closure;
	__u32 card;
};

/**
 * struct fw_cdev_send_request - Send an asynchronous request packet
 * @tcode:	Transaction code of the request
 * @length:	Length of outgoing payload, in bytes
 * @offset:	48-bit offset at destination node
 * @closure:	Passed back to userspace in the response event
 * @data:	Userspace pointer to payload
 * @generation:	The bus generation where packet is valid
 *
 * Send a request to the device.  This ioctl implements all outgoing requests.
 * Both quadlet and block request specify the payload as a pointer to the data
 * in the @data field.  Once the transaction completes, the kernel writes an
 * &fw_cdev_event_response event back.  The @closure field is passed back to
 * user space in the response event.
 */
struct fw_cdev_send_request {
	__u32 tcode;
	__u32 length;
	__u64 offset;
	__u64 closure;
	__u64 data;
	__u32 generation;
};

/**
 * struct fw_cdev_send_response - Send an asynchronous response packet
 * @rcode:	Response code as determined by the userspace handler
 * @length:	Length of outgoing payload, in bytes
 * @data:	Userspace pointer to payload
 * @handle:	The handle from the &fw_cdev_event_request
 *
 * Send a response to an incoming request.  By setting up an address range using
 * the %FW_CDEV_IOC_ALLOCATE ioctl, userspace can listen for incoming requests.  An
 * incoming request will generate an %FW_CDEV_EVENT_REQUEST, and userspace must
 * send a reply using this ioctl.  The event has a handle to the kernel-side
 * pending transaction, which should be used with this ioctl.
 */
struct fw_cdev_send_response {
	__u32 rcode;
	__u32 length;
	__u64 data;
	__u32 handle;
};

/**
 * struct fw_cdev_allocate - Allocate a CSR in an address range
 * @offset:	Start offset of the address range
 * @closure:	To be passed back to userspace in request events
 * @length:	Length of the CSR, in bytes
 * @handle:	Handle to the allocation, written by the kernel
 * @region_end:	First address above the address range (added in ABI v4, 2.6.36)
 *
 * Allocate an address range in the 48-bit address space on the local node
 * (the controller).  This allows userspace to listen for requests with an
 * offset within that address range.  Every time when the kernel receives a
 * request within the range, an &fw_cdev_event_request2 event will be emitted.
 * (If the kernel or the client implements ABI version <= 3, an
 * &fw_cdev_event_request will be generated instead.)
 *
 * The @closure field is passed back to userspace in these request events.
 * The @handle field is an out parameter, returning a handle to the allocated
 * range to be used for later deallocation of the range.
 *
 * The address range is allocated on all local nodes.  The address allocation
 * is exclusive except for the FCP command and response registers.  If an
 * exclusive address region is already in use, the ioctl fails with errno set
 * to %EBUSY.
 *
 * If kernel and client implement ABI version >= 4, the kernel looks up a free
 * spot of size @length inside [@offset..@region_end) and, if found, writes
 * the start address of the new CSR back in @offset.  I.e. @offset is an
 * in and out parameter.  If this automatic placement of a CSR in a bigger
 * address range is not desired, the client simply needs to set @region_end
 * = @offset + @length.
 *
 * If the kernel or the client implements ABI version <= 3, @region_end is
 * ignored and effectively assumed to be @offset + @length.
 *
 * @region_end is only present in a kernel header >= 2.6.36.  If necessary,
 * this can for example be tested by #ifdef FW_CDEV_EVENT_REQUEST2.
 */
struct fw_cdev_allocate {
	__u64 offset;
	__u64 closure;
	__u32 length;
	__u32 handle;
	__u64 region_end;	/* available since kernel version 2.6.36 */
};

/**
 * struct fw_cdev_deallocate - Free a CSR address range or isochronous resource
 * @handle:	Handle to the address range or iso resource, as returned by the
 *		kernel when the range or resource was allocated
 */
struct fw_cdev_deallocate {
	__u32 handle;
};

#define FW_CDEV_LONG_RESET	0
#define FW_CDEV_SHORT_RESET	1

/**
 * struct fw_cdev_initiate_bus_reset - Initiate a bus reset
 * @type:	%FW_CDEV_SHORT_RESET or %FW_CDEV_LONG_RESET
 *
 * Initiate a bus reset for the bus this device is on.  The bus reset can be
 * either the original (long) bus reset or the arbitrated (short) bus reset
 * introduced in 1394a-2000.
 *
 * The ioctl returns immediately.  A subsequent &fw_cdev_event_bus_reset
 * indicates when the reset actually happened.  Since ABI v4, this may be
 * considerably later than the ioctl because the kernel ensures a grace period
 * between subsequent bus resets as per IEEE 1394 bus management specification.
 */
struct fw_cdev_initiate_bus_reset {
	__u32 type;
};

/**
 * struct fw_cdev_add_descriptor - Add contents to the local node's config ROM
 * @immediate:	If non-zero, immediate key to insert before pointer
 * @key:	Upper 8 bits of root directory pointer
 * @data:	Userspace pointer to contents of descriptor block
 * @length:	Length of descriptor block data, in quadlets
 * @handle:	Handle to the descriptor, written by the kernel
 *
 * Add a descriptor block and optionally a preceding immediate key to the local
 * node's configuration ROM.
 *
 * The @key field specifies the upper 8 bits of the descriptor root directory
 * pointer and the @data and @length fields specify the contents. The @key
 * should be of the form 0xXX000000. The offset part of the root directory entry
 * will be filled in by the kernel.
 *
 * If not 0, the @immediate field specifies an immediate key which will be
 * inserted before the root directory pointer.
 *
 * @immediate, @key, and @data array elements are CPU-endian quadlets.
 *
 * If successful, the kernel adds the descriptor and writes back a @handle to
 * the kernel-side object to be used for later removal of the descriptor block
 * and immediate key.  The kernel will also generate a bus reset to signal the
 * change of the configuration ROM to other nodes.
 *
 * This ioctl affects the configuration ROMs of all local nodes.
 * The ioctl only succeeds on device files which represent a local node.
 */
struct fw_cdev_add_descriptor {
	__u32 immediate;
	__u32 key;
	__u64 data;
	__u32 length;
	__u32 handle;
};

/**
 * struct fw_cdev_remove_descriptor - Remove contents from the configuration ROM
 * @handle:	Handle to the descriptor, as returned by the kernel when the
 *		descriptor was added
 *
 * Remove a descriptor block and accompanying immediate key from the local
 * nodes' configuration ROMs.  The kernel will also generate a bus reset to
 * signal the change of the configuration ROM to other nodes.
 */
struct fw_cdev_remove_descriptor {
	__u32 handle;
};

#define FW_CDEV_ISO_CONTEXT_TRANSMIT			0
#define FW_CDEV_ISO_CONTEXT_RECEIVE			1
#define FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL	2 /* added in 2.6.36 */

/**
 * struct fw_cdev_create_iso_context - Create a context for isochronous I/O
 * @type:	%FW_CDEV_ISO_CONTEXT_TRANSMIT or %FW_CDEV_ISO_CONTEXT_RECEIVE or
 *		%FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL
 * @header_size: Header size to strip in single-channel reception
 * @channel:	Channel to bind to in single-channel reception or transmission
 * @speed:	Transmission speed
 * @closure:	To be returned in &fw_cdev_event_iso_interrupt or
 *		&fw_cdev_event_iso_interrupt_multichannel
 * @handle:	Handle to context, written back by kernel
 *
 * Prior to sending or receiving isochronous I/O, a context must be created.
 * The context records information about the transmit or receive configuration
 * and typically maps to an underlying hardware resource.  A context is set up
 * for either sending or receiving.  It is bound to a specific isochronous
 * @channel.
 *
 * In case of multichannel reception, @header_size and @channel are ignored
 * and the channels are selected by %FW_CDEV_IOC_SET_ISO_CHANNELS.
 *
 * For %FW_CDEV_ISO_CONTEXT_RECEIVE contexts, @header_size must be at least 4
 * and must be a multiple of 4.  It is ignored in other context types.
 *
 * @speed is ignored in receive context types.
 *
 * If a context was successfully created, the kernel writes back a handle to the
 * context, which must be passed in for subsequent operations on that context.
 *
 * Limitations:
 * No more than one iso context can be created per fd.
 * The total number of contexts that all userspace and kernelspace drivers can
 * create on a card at a time is a hardware limit, typically 4 or 8 contexts per
 * direction, and of them at most one multichannel receive context.
 */
struct fw_cdev_create_iso_context {
	__u32 type;
	__u32 header_size;
	__u32 channel;
	__u32 speed;
	__u64 closure;
	__u32 handle;
};

/**
 * struct fw_cdev_set_iso_channels - Select channels in multichannel reception
 * @channels:	Bitmask of channels to listen to
 * @handle:	Handle of the mutichannel receive context
 *
 * @channels is the bitwise or of 1ULL << n for each channel n to listen to.
 *
 * The ioctl fails with errno %EBUSY if there is already another receive context
 * on a channel in @channels.  In that case, the bitmask of all unoccupied
 * channels is returned in @channels.
 */
struct fw_cdev_set_iso_channels {
	__u64 channels;
	__u32 handle;
};

#define FW_CDEV_ISO_PAYLOAD_LENGTH(v)	(v)
#define FW_CDEV_ISO_INTERRUPT		(1 << 16)
#define FW_CDEV_ISO_SKIP		(1 << 17)
#define FW_CDEV_ISO_SYNC		(1 << 17)
#define FW_CDEV_ISO_TAG(v)		((v) << 18)
#define FW_CDEV_ISO_SY(v)		((v) << 20)
#define FW_CDEV_ISO_HEADER_LENGTH(v)	((v) << 24)

/**
 * struct fw_cdev_iso_packet - Isochronous packet
 * @control:	Contains the header length (8 uppermost bits),
 *		the sy field (4 bits), the tag field (2 bits), a sync flag
 *		or a skip flag (1 bit), an interrupt flag (1 bit), and the
 *		payload length (16 lowermost bits)
 * @header:	Header and payload in case of a transmit context.
 *
 * &struct fw_cdev_iso_packet is used to describe isochronous packet queues.
 * Use the FW_CDEV_ISO_ macros to fill in @control.
 * The @header array is empty in case of receive contexts.
 *
 * Context type %FW_CDEV_ISO_CONTEXT_TRANSMIT:
 *
 * @control.HEADER_LENGTH must be a multiple of 4.  It specifies the numbers of
 * bytes in @header that will be prepended to the packet's payload.  These bytes
 * are copied into the kernel and will not be accessed after the ioctl has
 * returned.
 *
 * The @control.SY and TAG fields are copied to the iso packet header.  These
 * fields are specified by IEEE 1394a and IEC 61883-1.
 *
 * The @control.SKIP flag specifies that no packet is to be sent in a frame.
 * When using this, all other fields except @control.INTERRUPT must be zero.
 *
 * When a packet with the @control.INTERRUPT flag set has been completed, an
 * &fw_cdev_event_iso_interrupt event will be sent.
 *
 * Context type %FW_CDEV_ISO_CONTEXT_RECEIVE:
 *
 * @control.HEADER_LENGTH must be a multiple of the context's header_size.
 * If the HEADER_LENGTH is larger than the context's header_size, multiple
 * packets are queued for this entry.
 *
 * The @control.SY and TAG fields are ignored.
 *
 * If the @control.SYNC flag is set, the context drops all packets until a
 * packet with a sy field is received which matches &fw_cdev_start_iso.sync.
 *
 * @control.PAYLOAD_LENGTH defines how many payload bytes can be received for
 * one packet (in addition to payload quadlets that have been defined as headers
 * and are stripped and returned in the &fw_cdev_event_iso_interrupt structure).
 * If more bytes are received, the additional bytes are dropped.  If less bytes
 * are received, the remaining bytes in this part of the payload buffer will not
 * be written to, not even by the next packet.  I.e., packets received in
 * consecutive frames will not necessarily be consecutive in memory.  If an
 * entry has queued multiple packets, the PAYLOAD_LENGTH is divided equally
 * among them.
 *
 * When a packet with the @control.INTERRUPT flag set has been completed, an
 * &fw_cdev_event_iso_interrupt event will be sent.  An entry that has queued
 * multiple receive packets is completed when its last packet is completed.
 *
 * Context type %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL:
 *
 * Here, &fw_cdev_iso_packet would be more aptly named _iso_buffer_chunk since
 * it specifies a chunk of the mmap()'ed buffer, while the number and alignment
 * of packets to be placed into the buffer chunk is not known beforehand.
 *
 * @control.PAYLOAD_LENGTH is the size of the buffer chunk and specifies room
 * for header, payload, padding, and trailer bytes of one or more packets.
 * It must be a multiple of 4.
 *
 * @control.HEADER_LENGTH, TAG and SY are ignored.  SYNC is treated as described
 * for single-channel reception.
 *
 * When a buffer chunk with the @control.INTERRUPT flag set has been filled
 * entirely, an &fw_cdev_event_iso_interrupt_mc event will be sent.
 */
struct fw_cdev_iso_packet {
	__u32 control;
	__u32 header[0];
};

/**
 * struct fw_cdev_queue_iso - Queue isochronous packets for I/O
 * @packets:	Userspace pointer to an array of &fw_cdev_iso_packet
 * @data:	Pointer into mmap()'ed payload buffer
 * @size:	Size of the @packets array, in bytes
 * @handle:	Isochronous context handle
 *
 * Queue a number of isochronous packets for reception or transmission.
 * This ioctl takes a pointer to an array of &fw_cdev_iso_packet structs,
 * which describe how to transmit from or receive into a contiguous region
 * of a mmap()'ed payload buffer.  As part of transmit packet descriptors,
 * a series of headers can be supplied, which will be prepended to the
 * payload during DMA.
 *
 * The kernel may or may not queue all packets, but will write back updated
 * values of the @packets, @data and @size fields, so the ioctl can be
 * resubmitted easily.
 *
 * In case of a multichannel receive context, @data must be quadlet-aligned
 * relative to the buffer start.
 */
struct fw_cdev_queue_iso {
	__u64 packets;
	__u64 data;
	__u32 size;
	__u32 handle;
};

#define FW_CDEV_ISO_CONTEXT_MATCH_TAG0		 1
#define FW_CDEV_ISO_CONTEXT_MATCH_TAG1		 2
#define FW_CDEV_ISO_CONTEXT_MATCH_TAG2		 4
#define FW_CDEV_ISO_CONTEXT_MATCH_TAG3		 8
#define FW_CDEV_ISO_CONTEXT_MATCH_ALL_TAGS	15

/**
 * struct fw_cdev_start_iso - Start an isochronous transmission or reception
 * @cycle:	Cycle in which to start I/O.  If @cycle is greater than or
 *		equal to 0, the I/O will start on that cycle.
 * @sync:	Determines the value to wait for for receive packets that have
 *		the %FW_CDEV_ISO_SYNC bit set
 * @tags:	Tag filter bit mask.  Only valid for isochronous reception.
 *		Determines the tag values for which packets will be accepted.
 *		Use FW_CDEV_ISO_CONTEXT_MATCH_ macros to set @tags.
 * @handle:	Isochronous context handle within which to transmit or receive
 */
struct fw_cdev_start_iso {
	__s32 cycle;
	__u32 sync;
	__u32 tags;
	__u32 handle;
};

/**
 * struct fw_cdev_stop_iso - Stop an isochronous transmission or reception
 * @handle:	Handle of isochronous context to stop
 */
struct fw_cdev_stop_iso {
	__u32 handle;
};

/**
 * struct fw_cdev_get_cycle_timer - read cycle timer register
 * @local_time:   system time, in microseconds since the Epoch
 * @cycle_timer:  Cycle Time register contents
 *
 * The %FW_CDEV_IOC_GET_CYCLE_TIMER ioctl reads the isochronous cycle timer
 * and also the system clock (%CLOCK_REALTIME).  This allows to express the
 * receive time of an isochronous packet as a system time.
 *
 * @cycle_timer consists of 7 bits cycleSeconds, 13 bits cycleCount, and
 * 12 bits cycleOffset, in host byte order.  Cf. the Cycle Time register
 * per IEEE 1394 or Isochronous Cycle Timer register per OHCI-1394.
 *
 * In version 1 and 2 of the ABI, this ioctl returned unreliable (non-
 * monotonic) @cycle_timer values on certain controllers.
 */
struct fw_cdev_get_cycle_timer {
	__u64 local_time;
	__u32 cycle_timer;
};

/**
 * struct fw_cdev_get_cycle_timer2 - read cycle timer register
 * @tv_sec:       system time, seconds
 * @tv_nsec:      system time, sub-seconds part in nanoseconds
 * @clk_id:       input parameter, clock from which to get the system time
 * @cycle_timer:  Cycle Time register contents
 *
 * The %FW_CDEV_IOC_GET_CYCLE_TIMER2 works like
 * %FW_CDEV_IOC_GET_CYCLE_TIMER but lets you choose a clock like with POSIX'
 * clock_gettime function.  Supported @clk_id values are POSIX' %CLOCK_REALTIME
 * and %CLOCK_MONOTONIC and Linux' %CLOCK_MONOTONIC_RAW.
 */
struct fw_cdev_get_cycle_timer2 {
	__s64 tv_sec;
	__s32 tv_nsec;
	__s32 clk_id;
	__u32 cycle_timer;
};

/**
 * struct fw_cdev_allocate_iso_resource - (De)allocate a channel or bandwidth
 * @closure:	Passed back to userspace in correponding iso resource events
 * @channels:	Isochronous channels of which one is to be (de)allocated
 * @bandwidth:	Isochronous bandwidth units to be (de)allocated
 * @handle:	Handle to the allocation, written by the kernel (only valid in
 *		case of %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE ioctls)
 *
 * The %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE ioctl initiates allocation of an
 * isochronous channel and/or of isochronous bandwidth at the isochronous
 * resource manager (IRM).  Only one of the channels specified in @channels is
 * allocated.  An %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED is sent after
 * communication with the IRM, indicating success or failure in the event data.
 * The kernel will automatically reallocate the resources after bus resets.
 * Should a reallocation fail, an %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event
 * will be sent.  The kernel will also automatically deallocate the resources
 * when the file descriptor is closed.
 *
 * The %FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE ioctl can be used to initiate
 * deallocation of resources which were allocated as described above.
 * An %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event concludes this operation.
 *
 * The %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE ioctl is a variant of allocation
 * without automatic re- or deallocation.
 * An %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED event concludes this operation,
 * indicating success or failure in its data.
 *
 * The %FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE_ONCE ioctl works like
 * %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE except that resources are freed
 * instead of allocated.
 * An %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event concludes this operation.
 *
 * To summarize, %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE allocates iso resources
 * for the lifetime of the fd or @handle.
 * In contrast, %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE allocates iso resources
 * for the duration of a bus generation.
 *
 * @channels is a host-endian bitfield with the least significant bit
 * representing channel 0 and the most significant bit representing channel 63:
 * 1ULL << c for each channel c that is a candidate for (de)allocation.
 *
 * @bandwidth is expressed in bandwidth allocation units, i.e. the time to send
 * one quadlet of data (payload or header data) at speed S1600.
 */
struct fw_cdev_allocate_iso_resource {
	__u64 closure;
	__u64 channels;
	__u32 bandwidth;
	__u32 handle;
};

/**
 * struct fw_cdev_send_stream_packet - send an asynchronous stream packet
 * @length:	Length of outgoing payload, in bytes
 * @tag:	Data format tag
 * @channel:	Isochronous channel to transmit to
 * @sy:		Synchronization code
 * @closure:	Passed back to userspace in the response event
 * @data:	Userspace pointer to payload
 * @generation:	The bus generation where packet is valid
 * @speed:	Speed to transmit at
 *
 * The %FW_CDEV_IOC_SEND_STREAM_PACKET ioctl sends an asynchronous stream packet
 * to every device which is listening to the specified channel.  The kernel
 * writes an &fw_cdev_event_response event which indicates success or failure of
 * the transmission.
 */
struct fw_cdev_send_stream_packet {
	__u32 length;
	__u32 tag;
	__u32 channel;
	__u32 sy;
	__u64 closure;
	__u64 data;
	__u32 generation;
	__u32 speed;
};

/**
 * struct fw_cdev_send_phy_packet - send a PHY packet
 * @closure:	Passed back to userspace in the PHY-packet-sent event
 * @data:	First and second quadlet of the PHY packet
 * @generation:	The bus generation where packet is valid
 *
 * The %FW_CDEV_IOC_SEND_PHY_PACKET ioctl sends a PHY packet to all nodes
 * on the same card as this device.  After transmission, an
 * %FW_CDEV_EVENT_PHY_PACKET_SENT event is generated.
 *
 * The payload @data[] shall be specified in host byte order.  Usually,
 * @data[1] needs to be the bitwise inverse of @data[0].  VersaPHY packets
 * are an exception to this rule.
 *
 * The ioctl is only permitted on device files which represent a local node.
 */
struct fw_cdev_send_phy_packet {
	__u64 closure;
	__u32 data[2];
	__u32 generation;
};

/**
 * struct fw_cdev_receive_phy_packets - start reception of PHY packets
 * @closure: Passed back to userspace in phy packet events
 *
 * This ioctl activates issuing of %FW_CDEV_EVENT_PHY_PACKET_RECEIVED due to
 * incoming PHY packets from any node on the same bus as the device.
 *
 * The ioctl is only permitted on device files which represent a local node.
 */
struct fw_cdev_receive_phy_packets {
	__u64 closure;
};

#endif /* _LINUX_FIREWIRE_CDEV_H */