blob: e415c5eca59910822c46728f2866d9f8351b45dc [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * linux/drivers/char/8250.c
3 *
4 * Driver for 8250/16550-type serial ports
5 *
6 * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
7 *
8 * Copyright (C) 2001 Russell King.
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
14 *
Linus Torvalds1da177e2005-04-16 15:20:36 -070015 * A note about mapbase / membase
16 *
17 * mapbase is the physical address of the IO port.
18 * membase is an 'ioremapped' cookie.
19 */
Linus Torvalds1da177e2005-04-16 15:20:36 -070020
21#if defined(CONFIG_SERIAL_8250_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
22#define SUPPORT_SYSRQ
23#endif
24
25#include <linux/module.h>
26#include <linux/moduleparam.h>
27#include <linux/ioport.h>
28#include <linux/init.h>
29#include <linux/console.h>
30#include <linux/sysrq.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070031#include <linux/delay.h>
Russell Kingd052d1b2005-10-29 19:07:23 +010032#include <linux/platform_device.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070033#include <linux/tty.h>
34#include <linux/tty_flip.h>
35#include <linux/serial_reg.h>
36#include <linux/serial_core.h>
37#include <linux/serial.h>
38#include <linux/serial_8250.h>
Andrew Morton78512ec2005-11-07 00:59:13 -080039#include <linux/nmi.h>
Arjan van de Venf392ecf2006-01-12 18:44:32 +000040#include <linux/mutex.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070041
42#include <asm/io.h>
43#include <asm/irq.h>
44
45#include "8250.h"
46
David Millerb70ac772008-10-13 10:36:31 +010047#ifdef CONFIG_SPARC
48#include "suncore.h"
49#endif
50
Linus Torvalds1da177e2005-04-16 15:20:36 -070051/*
52 * Configuration:
Thomas Gleixner40663cc2006-07-01 19:29:43 -070053 * share_irqs - whether we pass IRQF_SHARED to request_irq(). This option
Linus Torvalds1da177e2005-04-16 15:20:36 -070054 * is unsafe when used on edge-triggered interrupts.
55 */
Adrian Bunk408b6642005-05-01 08:59:29 -070056static unsigned int share_irqs = SERIAL8250_SHARE_IRQS;
Linus Torvalds1da177e2005-04-16 15:20:36 -070057
Dave Jonesa61c2d72006-01-07 23:18:19 +000058static unsigned int nr_uarts = CONFIG_SERIAL_8250_RUNTIME_UARTS;
59
David S. Miller84408382008-10-13 10:45:26 +010060static struct uart_driver serial8250_reg;
61
62static int serial_index(struct uart_port *port)
63{
64 return (serial8250_reg.minor - 64) + port->line;
65}
66
Linus Torvalds1da177e2005-04-16 15:20:36 -070067/*
68 * Debugging.
69 */
70#if 0
71#define DEBUG_AUTOCONF(fmt...) printk(fmt)
72#else
73#define DEBUG_AUTOCONF(fmt...) do { } while (0)
74#endif
75
76#if 0
77#define DEBUG_INTR(fmt...) printk(fmt)
78#else
79#define DEBUG_INTR(fmt...) do { } while (0)
80#endif
81
82#define PASS_LIMIT 256
83
84/*
85 * We default to IRQ0 for the "no irq" hack. Some
86 * machine types want others as well - they're free
87 * to redefine this in their header file.
88 */
89#define is_real_interrupt(irq) ((irq) != 0)
90
Linus Torvalds1da177e2005-04-16 15:20:36 -070091#ifdef CONFIG_SERIAL_8250_DETECT_IRQ
92#define CONFIG_SERIAL_DETECT_IRQ 1
93#endif
Linus Torvalds1da177e2005-04-16 15:20:36 -070094#ifdef CONFIG_SERIAL_8250_MANY_PORTS
95#define CONFIG_SERIAL_MANY_PORTS 1
96#endif
97
98/*
99 * HUB6 is always on. This will be removed once the header
100 * files have been cleaned.
101 */
102#define CONFIG_HUB6 1
103
Bryan Wua4ed1e42008-05-31 16:10:04 +0800104#include <asm/serial.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -0700105/*
106 * SERIAL_PORT_DFNS tells us about built-in ports that have no
107 * standard enumeration mechanism. Platforms that can find all
108 * serial ports via mechanisms like ACPI or PCI need not supply it.
109 */
110#ifndef SERIAL_PORT_DFNS
111#define SERIAL_PORT_DFNS
112#endif
113
Arjan van de Vencb3592b2005-11-28 21:04:11 +0000114static const struct old_serial_port old_serial_port[] = {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700115 SERIAL_PORT_DFNS /* defined in asm/serial.h */
116};
117
Russell King026d02a2005-06-29 18:45:19 +0100118#define UART_NR CONFIG_SERIAL_8250_NR_UARTS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700119
120#ifdef CONFIG_SERIAL_8250_RSA
121
122#define PORT_RSA_MAX 4
123static unsigned long probe_rsa[PORT_RSA_MAX];
124static unsigned int probe_rsa_count;
125#endif /* CONFIG_SERIAL_8250_RSA */
126
127struct uart_8250_port {
128 struct uart_port port;
129 struct timer_list timer; /* "no irq" timer */
130 struct list_head list; /* ports on this IRQ */
Russell King4ba5e352005-06-23 10:43:04 +0100131 unsigned short capabilities; /* port capabilities */
132 unsigned short bugs; /* port bugs */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700133 unsigned int tx_loadsz; /* transmit fifo load size */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700134 unsigned char acr;
135 unsigned char ier;
136 unsigned char lcr;
137 unsigned char mcr;
138 unsigned char mcr_mask; /* mask of user bits */
139 unsigned char mcr_force; /* mask of forced bits */
Alan Coxb8e7e402009-05-28 14:01:35 +0100140 unsigned char cur_iotype; /* Running I/O type */
Corey Minyardad4c2aa2007-08-22 14:01:18 -0700141
142 /*
143 * Some bits in registers are cleared on a read, so they must
144 * be saved whenever the register is read but the bits will not
145 * be immediately processed.
146 */
147#define LSR_SAVE_FLAGS UART_LSR_BRK_ERROR_BITS
148 unsigned char lsr_saved_flags;
149#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA
150 unsigned char msr_saved_flags;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700151
152 /*
153 * We provide a per-port pm hook.
154 */
155 void (*pm)(struct uart_port *port,
156 unsigned int state, unsigned int old);
157};
158
159struct irq_info {
Alan Cox25db8ad2008-08-19 20:49:40 -0700160 struct hlist_node node;
161 int irq;
162 spinlock_t lock; /* Protects list not the hash */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700163 struct list_head *head;
164};
165
Alan Cox25db8ad2008-08-19 20:49:40 -0700166#define NR_IRQ_HASH 32 /* Can be adjusted later */
167static struct hlist_head irq_lists[NR_IRQ_HASH];
168static DEFINE_MUTEX(hash_mutex); /* Used to walk the hash */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700169
170/*
171 * Here we define the default xmit fifo size used for each type of UART.
172 */
173static const struct serial8250_config uart_config[] = {
174 [PORT_UNKNOWN] = {
175 .name = "unknown",
176 .fifo_size = 1,
177 .tx_loadsz = 1,
178 },
179 [PORT_8250] = {
180 .name = "8250",
181 .fifo_size = 1,
182 .tx_loadsz = 1,
183 },
184 [PORT_16450] = {
185 .name = "16450",
186 .fifo_size = 1,
187 .tx_loadsz = 1,
188 },
189 [PORT_16550] = {
190 .name = "16550",
191 .fifo_size = 1,
192 .tx_loadsz = 1,
193 },
194 [PORT_16550A] = {
195 .name = "16550A",
196 .fifo_size = 16,
197 .tx_loadsz = 16,
198 .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
199 .flags = UART_CAP_FIFO,
200 },
201 [PORT_CIRRUS] = {
202 .name = "Cirrus",
203 .fifo_size = 1,
204 .tx_loadsz = 1,
205 },
206 [PORT_16650] = {
207 .name = "ST16650",
208 .fifo_size = 1,
209 .tx_loadsz = 1,
210 .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
211 },
212 [PORT_16650V2] = {
213 .name = "ST16650V2",
214 .fifo_size = 32,
215 .tx_loadsz = 16,
216 .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 |
217 UART_FCR_T_TRIG_00,
218 .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
219 },
220 [PORT_16750] = {
221 .name = "TI16750",
222 .fifo_size = 64,
223 .tx_loadsz = 64,
224 .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 |
225 UART_FCR7_64BYTE,
226 .flags = UART_CAP_FIFO | UART_CAP_SLEEP | UART_CAP_AFE,
227 },
228 [PORT_STARTECH] = {
229 .name = "Startech",
230 .fifo_size = 1,
231 .tx_loadsz = 1,
232 },
233 [PORT_16C950] = {
234 .name = "16C950/954",
235 .fifo_size = 128,
236 .tx_loadsz = 128,
237 .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
238 .flags = UART_CAP_FIFO,
239 },
240 [PORT_16654] = {
241 .name = "ST16654",
242 .fifo_size = 64,
243 .tx_loadsz = 32,
244 .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 |
245 UART_FCR_T_TRIG_10,
246 .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
247 },
248 [PORT_16850] = {
249 .name = "XR16850",
250 .fifo_size = 128,
251 .tx_loadsz = 128,
252 .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
253 .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
254 },
255 [PORT_RSA] = {
256 .name = "RSA",
257 .fifo_size = 2048,
258 .tx_loadsz = 2048,
259 .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_11,
260 .flags = UART_CAP_FIFO,
261 },
262 [PORT_NS16550A] = {
263 .name = "NS16550A",
264 .fifo_size = 16,
265 .tx_loadsz = 16,
266 .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
267 .flags = UART_CAP_FIFO | UART_NATSEMI,
268 },
269 [PORT_XSCALE] = {
270 .name = "XScale",
271 .fifo_size = 32,
272 .tx_loadsz = 32,
273 .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
274 .flags = UART_CAP_FIFO | UART_CAP_UUE,
275 },
Thomas Koellerbd71c182007-05-06 14:48:47 -0700276 [PORT_RM9000] = {
277 .name = "RM9000",
278 .fifo_size = 16,
279 .tx_loadsz = 16,
280 .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
281 .flags = UART_CAP_FIFO,
282 },
David Daney6b06f192009-01-02 13:50:00 +0000283 [PORT_OCTEON] = {
284 .name = "OCTEON",
285 .fifo_size = 64,
286 .tx_loadsz = 64,
287 .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
288 .flags = UART_CAP_FIFO,
289 },
Florian Fainelli08e09922009-06-11 13:21:24 +0100290 [PORT_AR7] = {
291 .name = "AR7",
292 .fifo_size = 16,
293 .tx_loadsz = 16,
294 .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00,
295 .flags = UART_CAP_FIFO | UART_CAP_AFE,
296 },
Linus Torvalds1da177e2005-04-16 15:20:36 -0700297};
298
Thomas Koellerbd71c182007-05-06 14:48:47 -0700299#if defined (CONFIG_SERIAL_8250_AU1X00)
Pantelis Antoniou21c614a2005-11-06 09:07:03 +0000300
301/* Au1x00 UART hardware has a weird register layout */
302static const u8 au_io_in_map[] = {
303 [UART_RX] = 0,
304 [UART_IER] = 2,
305 [UART_IIR] = 3,
306 [UART_LCR] = 5,
307 [UART_MCR] = 6,
308 [UART_LSR] = 7,
309 [UART_MSR] = 8,
310};
311
312static const u8 au_io_out_map[] = {
313 [UART_TX] = 1,
314 [UART_IER] = 2,
315 [UART_FCR] = 4,
316 [UART_LCR] = 5,
317 [UART_MCR] = 6,
318};
319
320/* sane hardware needs no mapping */
David Daney7d6a07d2009-01-02 13:49:47 +0000321static inline int map_8250_in_reg(struct uart_port *p, int offset)
Pantelis Antoniou21c614a2005-11-06 09:07:03 +0000322{
David Daney7d6a07d2009-01-02 13:49:47 +0000323 if (p->iotype != UPIO_AU)
Pantelis Antoniou21c614a2005-11-06 09:07:03 +0000324 return offset;
325 return au_io_in_map[offset];
326}
327
David Daney7d6a07d2009-01-02 13:49:47 +0000328static inline int map_8250_out_reg(struct uart_port *p, int offset)
Pantelis Antoniou21c614a2005-11-06 09:07:03 +0000329{
David Daney7d6a07d2009-01-02 13:49:47 +0000330 if (p->iotype != UPIO_AU)
Pantelis Antoniou21c614a2005-11-06 09:07:03 +0000331 return offset;
332 return au_io_out_map[offset];
333}
334
Alan Cox6f803cd2008-02-08 04:18:52 -0800335#elif defined(CONFIG_SERIAL_8250_RM9K)
Thomas Koellerbd71c182007-05-06 14:48:47 -0700336
337static const u8
338 regmap_in[8] = {
339 [UART_RX] = 0x00,
340 [UART_IER] = 0x0c,
341 [UART_IIR] = 0x14,
342 [UART_LCR] = 0x1c,
343 [UART_MCR] = 0x20,
344 [UART_LSR] = 0x24,
345 [UART_MSR] = 0x28,
346 [UART_SCR] = 0x2c
347 },
348 regmap_out[8] = {
349 [UART_TX] = 0x04,
350 [UART_IER] = 0x0c,
351 [UART_FCR] = 0x18,
352 [UART_LCR] = 0x1c,
353 [UART_MCR] = 0x20,
354 [UART_LSR] = 0x24,
355 [UART_MSR] = 0x28,
356 [UART_SCR] = 0x2c
357 };
358
David Daney7d6a07d2009-01-02 13:49:47 +0000359static inline int map_8250_in_reg(struct uart_port *p, int offset)
Thomas Koellerbd71c182007-05-06 14:48:47 -0700360{
David Daney7d6a07d2009-01-02 13:49:47 +0000361 if (p->iotype != UPIO_RM9000)
Thomas Koellerbd71c182007-05-06 14:48:47 -0700362 return offset;
363 return regmap_in[offset];
364}
365
David Daney7d6a07d2009-01-02 13:49:47 +0000366static inline int map_8250_out_reg(struct uart_port *p, int offset)
Thomas Koellerbd71c182007-05-06 14:48:47 -0700367{
David Daney7d6a07d2009-01-02 13:49:47 +0000368 if (p->iotype != UPIO_RM9000)
Thomas Koellerbd71c182007-05-06 14:48:47 -0700369 return offset;
370 return regmap_out[offset];
371}
372
Pantelis Antoniou21c614a2005-11-06 09:07:03 +0000373#else
374
375/* sane hardware needs no mapping */
376#define map_8250_in_reg(up, offset) (offset)
377#define map_8250_out_reg(up, offset) (offset)
378
379#endif
380
David Daney7d6a07d2009-01-02 13:49:47 +0000381static unsigned int hub6_serial_in(struct uart_port *p, int offset)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700382{
David Daney7d6a07d2009-01-02 13:49:47 +0000383 offset = map_8250_in_reg(p, offset) << p->regshift;
384 outb(p->hub6 - 1 + offset, p->iobase);
385 return inb(p->iobase + 1);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700386}
387
David Daney7d6a07d2009-01-02 13:49:47 +0000388static void hub6_serial_out(struct uart_port *p, int offset, int value)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700389{
David Daney7d6a07d2009-01-02 13:49:47 +0000390 offset = map_8250_out_reg(p, offset) << p->regshift;
391 outb(p->hub6 - 1 + offset, p->iobase);
392 outb(value, p->iobase + 1);
393}
Linus Torvalds1da177e2005-04-16 15:20:36 -0700394
David Daney7d6a07d2009-01-02 13:49:47 +0000395static unsigned int mem_serial_in(struct uart_port *p, int offset)
396{
397 offset = map_8250_in_reg(p, offset) << p->regshift;
398 return readb(p->membase + offset);
399}
400
401static void mem_serial_out(struct uart_port *p, int offset, int value)
402{
403 offset = map_8250_out_reg(p, offset) << p->regshift;
404 writeb(value, p->membase + offset);
405}
406
407static void mem32_serial_out(struct uart_port *p, int offset, int value)
408{
409 offset = map_8250_out_reg(p, offset) << p->regshift;
410 writel(value, p->membase + offset);
411}
412
413static unsigned int mem32_serial_in(struct uart_port *p, int offset)
414{
415 offset = map_8250_in_reg(p, offset) << p->regshift;
416 return readl(p->membase + offset);
417}
418
419#ifdef CONFIG_SERIAL_8250_AU1X00
420static unsigned int au_serial_in(struct uart_port *p, int offset)
421{
422 offset = map_8250_in_reg(p, offset) << p->regshift;
423 return __raw_readl(p->membase + offset);
424}
425
426static void au_serial_out(struct uart_port *p, int offset, int value)
427{
428 offset = map_8250_out_reg(p, offset) << p->regshift;
429 __raw_writel(value, p->membase + offset);
430}
431#endif
432
433static unsigned int tsi_serial_in(struct uart_port *p, int offset)
434{
435 unsigned int tmp;
436 offset = map_8250_in_reg(p, offset) << p->regshift;
437 if (offset == UART_IIR) {
438 tmp = readl(p->membase + (UART_IIR & ~3));
439 return (tmp >> 16) & 0xff; /* UART_IIR % 4 == 2 */
440 } else
441 return readb(p->membase + offset);
442}
443
444static void tsi_serial_out(struct uart_port *p, int offset, int value)
445{
446 offset = map_8250_out_reg(p, offset) << p->regshift;
447 if (!((offset == UART_IER) && (value & UART_IER_UUE)))
448 writeb(value, p->membase + offset);
449}
450
451static void dwapb_serial_out(struct uart_port *p, int offset, int value)
452{
453 int save_offset = offset;
454 offset = map_8250_out_reg(p, offset) << p->regshift;
455 /* Save the LCR value so it can be re-written when a
456 * Busy Detect interrupt occurs. */
457 if (save_offset == UART_LCR) {
458 struct uart_8250_port *up = (struct uart_8250_port *)p;
459 up->lcr = value;
460 }
461 writeb(value, p->membase + offset);
462 /* Read the IER to ensure any interrupt is cleared before
463 * returning from ISR. */
464 if (save_offset == UART_TX || save_offset == UART_IER)
465 value = p->serial_in(p, UART_IER);
466}
467
468static unsigned int io_serial_in(struct uart_port *p, int offset)
469{
470 offset = map_8250_in_reg(p, offset) << p->regshift;
471 return inb(p->iobase + offset);
472}
473
474static void io_serial_out(struct uart_port *p, int offset, int value)
475{
476 offset = map_8250_out_reg(p, offset) << p->regshift;
477 outb(value, p->iobase + offset);
478}
479
480static void set_io_from_upio(struct uart_port *p)
481{
Alan Coxb8e7e402009-05-28 14:01:35 +0100482 struct uart_8250_port *up = (struct uart_8250_port *)p;
David Daney7d6a07d2009-01-02 13:49:47 +0000483 switch (p->iotype) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700484 case UPIO_HUB6:
David Daney7d6a07d2009-01-02 13:49:47 +0000485 p->serial_in = hub6_serial_in;
486 p->serial_out = hub6_serial_out;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700487 break;
488
489 case UPIO_MEM:
David Daney7d6a07d2009-01-02 13:49:47 +0000490 p->serial_in = mem_serial_in;
491 p->serial_out = mem_serial_out;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700492 break;
493
Thomas Koellerbd71c182007-05-06 14:48:47 -0700494 case UPIO_RM9000:
Linus Torvalds1da177e2005-04-16 15:20:36 -0700495 case UPIO_MEM32:
David Daney7d6a07d2009-01-02 13:49:47 +0000496 p->serial_in = mem32_serial_in;
497 p->serial_out = mem32_serial_out;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700498 break;
499
Pantelis Antoniou21c614a2005-11-06 09:07:03 +0000500#ifdef CONFIG_SERIAL_8250_AU1X00
501 case UPIO_AU:
David Daney7d6a07d2009-01-02 13:49:47 +0000502 p->serial_in = au_serial_in;
503 p->serial_out = au_serial_out;
Pantelis Antoniou21c614a2005-11-06 09:07:03 +0000504 break;
505#endif
Zang Roy-r619113be91ec2006-06-30 02:29:58 -0700506 case UPIO_TSI:
David Daney7d6a07d2009-01-02 13:49:47 +0000507 p->serial_in = tsi_serial_in;
508 p->serial_out = tsi_serial_out;
Zang Roy-r619113be91ec2006-06-30 02:29:58 -0700509 break;
Pantelis Antoniou21c614a2005-11-06 09:07:03 +0000510
Marc St-Jeanbeab6972007-05-06 14:48:45 -0700511 case UPIO_DWAPB:
David Daney7d6a07d2009-01-02 13:49:47 +0000512 p->serial_in = mem_serial_in;
513 p->serial_out = dwapb_serial_out;
Marc St-Jeanbeab6972007-05-06 14:48:45 -0700514 break;
515
Linus Torvalds1da177e2005-04-16 15:20:36 -0700516 default:
David Daney7d6a07d2009-01-02 13:49:47 +0000517 p->serial_in = io_serial_in;
518 p->serial_out = io_serial_out;
519 break;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700520 }
Alan Coxb8e7e402009-05-28 14:01:35 +0100521 /* Remember loaded iotype */
522 up->cur_iotype = p->iotype;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700523}
524
Alex Williamson40b36da2007-02-14 00:33:04 -0800525static void
526serial_out_sync(struct uart_8250_port *up, int offset, int value)
527{
David Daney7d6a07d2009-01-02 13:49:47 +0000528 struct uart_port *p = &up->port;
529 switch (p->iotype) {
Alex Williamson40b36da2007-02-14 00:33:04 -0800530 case UPIO_MEM:
531 case UPIO_MEM32:
532#ifdef CONFIG_SERIAL_8250_AU1X00
533 case UPIO_AU:
534#endif
Marc St-Jeanbeab6972007-05-06 14:48:45 -0700535 case UPIO_DWAPB:
David Daney7d6a07d2009-01-02 13:49:47 +0000536 p->serial_out(p, offset, value);
537 p->serial_in(p, UART_LCR); /* safe, no side-effects */
Alex Williamson40b36da2007-02-14 00:33:04 -0800538 break;
539 default:
David Daney7d6a07d2009-01-02 13:49:47 +0000540 p->serial_out(p, offset, value);
Alex Williamson40b36da2007-02-14 00:33:04 -0800541 }
542}
543
David Daney7d6a07d2009-01-02 13:49:47 +0000544#define serial_in(up, offset) \
545 (up->port.serial_in(&(up)->port, (offset)))
546#define serial_out(up, offset, value) \
547 (up->port.serial_out(&(up)->port, (offset), (value)))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700548/*
549 * We used to support using pause I/O for certain machines. We
550 * haven't supported this for a while, but just in case it's badly
551 * needed for certain old 386 machines, I've left these #define's
552 * in....
553 */
554#define serial_inp(up, offset) serial_in(up, offset)
555#define serial_outp(up, offset, value) serial_out(up, offset, value)
556
Jon Anders Haugumb32b19b2006-04-30 11:20:56 +0100557/* Uart divisor latch read */
558static inline int _serial_dl_read(struct uart_8250_port *up)
559{
560 return serial_inp(up, UART_DLL) | serial_inp(up, UART_DLM) << 8;
561}
562
563/* Uart divisor latch write */
564static inline void _serial_dl_write(struct uart_8250_port *up, int value)
565{
566 serial_outp(up, UART_DLL, value & 0xff);
567 serial_outp(up, UART_DLM, value >> 8 & 0xff);
568}
569
Alan Cox6f803cd2008-02-08 04:18:52 -0800570#if defined(CONFIG_SERIAL_8250_AU1X00)
Jon Anders Haugumb32b19b2006-04-30 11:20:56 +0100571/* Au1x00 haven't got a standard divisor latch */
572static int serial_dl_read(struct uart_8250_port *up)
573{
574 if (up->port.iotype == UPIO_AU)
575 return __raw_readl(up->port.membase + 0x28);
576 else
577 return _serial_dl_read(up);
578}
579
580static void serial_dl_write(struct uart_8250_port *up, int value)
581{
582 if (up->port.iotype == UPIO_AU)
583 __raw_writel(value, up->port.membase + 0x28);
584 else
585 _serial_dl_write(up, value);
586}
Alan Cox6f803cd2008-02-08 04:18:52 -0800587#elif defined(CONFIG_SERIAL_8250_RM9K)
Thomas Koellerbd71c182007-05-06 14:48:47 -0700588static int serial_dl_read(struct uart_8250_port *up)
589{
590 return (up->port.iotype == UPIO_RM9000) ?
591 (((__raw_readl(up->port.membase + 0x10) << 8) |
592 (__raw_readl(up->port.membase + 0x08) & 0xff)) & 0xffff) :
593 _serial_dl_read(up);
594}
595
596static void serial_dl_write(struct uart_8250_port *up, int value)
597{
598 if (up->port.iotype == UPIO_RM9000) {
599 __raw_writel(value, up->port.membase + 0x08);
600 __raw_writel(value >> 8, up->port.membase + 0x10);
601 } else {
602 _serial_dl_write(up, value);
603 }
604}
Jon Anders Haugumb32b19b2006-04-30 11:20:56 +0100605#else
606#define serial_dl_read(up) _serial_dl_read(up)
607#define serial_dl_write(up, value) _serial_dl_write(up, value)
608#endif
Linus Torvalds1da177e2005-04-16 15:20:36 -0700609
610/*
611 * For the 16C950
612 */
613static void serial_icr_write(struct uart_8250_port *up, int offset, int value)
614{
615 serial_out(up, UART_SCR, offset);
616 serial_out(up, UART_ICR, value);
617}
618
619static unsigned int serial_icr_read(struct uart_8250_port *up, int offset)
620{
621 unsigned int value;
622
623 serial_icr_write(up, UART_ACR, up->acr | UART_ACR_ICRRD);
624 serial_out(up, UART_SCR, offset);
625 value = serial_in(up, UART_ICR);
626 serial_icr_write(up, UART_ACR, up->acr);
627
628 return value;
629}
630
631/*
632 * FIFO support.
633 */
Will Newtonb5d674a2008-10-13 10:36:21 +0100634static void serial8250_clear_fifos(struct uart_8250_port *p)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700635{
636 if (p->capabilities & UART_CAP_FIFO) {
637 serial_outp(p, UART_FCR, UART_FCR_ENABLE_FIFO);
638 serial_outp(p, UART_FCR, UART_FCR_ENABLE_FIFO |
639 UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
640 serial_outp(p, UART_FCR, 0);
641 }
642}
643
644/*
645 * IER sleep support. UARTs which have EFRs need the "extended
646 * capability" bit enabled. Note that on XR16C850s, we need to
647 * reset LCR to write to IER.
648 */
Will Newtonb5d674a2008-10-13 10:36:21 +0100649static void serial8250_set_sleep(struct uart_8250_port *p, int sleep)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700650{
651 if (p->capabilities & UART_CAP_SLEEP) {
652 if (p->capabilities & UART_CAP_EFR) {
653 serial_outp(p, UART_LCR, 0xBF);
654 serial_outp(p, UART_EFR, UART_EFR_ECB);
655 serial_outp(p, UART_LCR, 0);
656 }
657 serial_outp(p, UART_IER, sleep ? UART_IERX_SLEEP : 0);
658 if (p->capabilities & UART_CAP_EFR) {
659 serial_outp(p, UART_LCR, 0xBF);
660 serial_outp(p, UART_EFR, 0);
661 serial_outp(p, UART_LCR, 0);
662 }
663 }
664}
665
666#ifdef CONFIG_SERIAL_8250_RSA
667/*
668 * Attempts to turn on the RSA FIFO. Returns zero on failure.
669 * We set the port uart clock rate if we succeed.
670 */
671static int __enable_rsa(struct uart_8250_port *up)
672{
673 unsigned char mode;
674 int result;
675
676 mode = serial_inp(up, UART_RSA_MSR);
677 result = mode & UART_RSA_MSR_FIFO;
678
679 if (!result) {
680 serial_outp(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO);
681 mode = serial_inp(up, UART_RSA_MSR);
682 result = mode & UART_RSA_MSR_FIFO;
683 }
684
685 if (result)
686 up->port.uartclk = SERIAL_RSA_BAUD_BASE * 16;
687
688 return result;
689}
690
691static void enable_rsa(struct uart_8250_port *up)
692{
693 if (up->port.type == PORT_RSA) {
694 if (up->port.uartclk != SERIAL_RSA_BAUD_BASE * 16) {
695 spin_lock_irq(&up->port.lock);
696 __enable_rsa(up);
697 spin_unlock_irq(&up->port.lock);
698 }
699 if (up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16)
700 serial_outp(up, UART_RSA_FRR, 0);
701 }
702}
703
704/*
705 * Attempts to turn off the RSA FIFO. Returns zero on failure.
706 * It is unknown why interrupts were disabled in here. However,
707 * the caller is expected to preserve this behaviour by grabbing
708 * the spinlock before calling this function.
709 */
710static void disable_rsa(struct uart_8250_port *up)
711{
712 unsigned char mode;
713 int result;
714
715 if (up->port.type == PORT_RSA &&
716 up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) {
717 spin_lock_irq(&up->port.lock);
718
719 mode = serial_inp(up, UART_RSA_MSR);
720 result = !(mode & UART_RSA_MSR_FIFO);
721
722 if (!result) {
723 serial_outp(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO);
724 mode = serial_inp(up, UART_RSA_MSR);
725 result = !(mode & UART_RSA_MSR_FIFO);
726 }
727
728 if (result)
729 up->port.uartclk = SERIAL_RSA_BAUD_BASE_LO * 16;
730 spin_unlock_irq(&up->port.lock);
731 }
732}
733#endif /* CONFIG_SERIAL_8250_RSA */
734
735/*
736 * This is a quickie test to see how big the FIFO is.
737 * It doesn't work at all the time, more's the pity.
738 */
739static int size_fifo(struct uart_8250_port *up)
740{
Jon Anders Haugumb32b19b2006-04-30 11:20:56 +0100741 unsigned char old_fcr, old_mcr, old_lcr;
742 unsigned short old_dl;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700743 int count;
744
745 old_lcr = serial_inp(up, UART_LCR);
746 serial_outp(up, UART_LCR, 0);
747 old_fcr = serial_inp(up, UART_FCR);
748 old_mcr = serial_inp(up, UART_MCR);
749 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO |
750 UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
751 serial_outp(up, UART_MCR, UART_MCR_LOOP);
752 serial_outp(up, UART_LCR, UART_LCR_DLAB);
Jon Anders Haugumb32b19b2006-04-30 11:20:56 +0100753 old_dl = serial_dl_read(up);
754 serial_dl_write(up, 0x0001);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700755 serial_outp(up, UART_LCR, 0x03);
756 for (count = 0; count < 256; count++)
757 serial_outp(up, UART_TX, count);
758 mdelay(20);/* FIXME - schedule_timeout */
759 for (count = 0; (serial_inp(up, UART_LSR) & UART_LSR_DR) &&
760 (count < 256); count++)
761 serial_inp(up, UART_RX);
762 serial_outp(up, UART_FCR, old_fcr);
763 serial_outp(up, UART_MCR, old_mcr);
764 serial_outp(up, UART_LCR, UART_LCR_DLAB);
Jon Anders Haugumb32b19b2006-04-30 11:20:56 +0100765 serial_dl_write(up, old_dl);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700766 serial_outp(up, UART_LCR, old_lcr);
767
768 return count;
769}
770
771/*
772 * Read UART ID using the divisor method - set DLL and DLM to zero
773 * and the revision will be in DLL and device type in DLM. We
774 * preserve the device state across this.
775 */
776static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p)
777{
778 unsigned char old_dll, old_dlm, old_lcr;
779 unsigned int id;
780
781 old_lcr = serial_inp(p, UART_LCR);
782 serial_outp(p, UART_LCR, UART_LCR_DLAB);
783
784 old_dll = serial_inp(p, UART_DLL);
785 old_dlm = serial_inp(p, UART_DLM);
786
787 serial_outp(p, UART_DLL, 0);
788 serial_outp(p, UART_DLM, 0);
789
790 id = serial_inp(p, UART_DLL) | serial_inp(p, UART_DLM) << 8;
791
792 serial_outp(p, UART_DLL, old_dll);
793 serial_outp(p, UART_DLM, old_dlm);
794 serial_outp(p, UART_LCR, old_lcr);
795
796 return id;
797}
798
799/*
800 * This is a helper routine to autodetect StarTech/Exar/Oxsemi UART's.
801 * When this function is called we know it is at least a StarTech
802 * 16650 V2, but it might be one of several StarTech UARTs, or one of
803 * its clones. (We treat the broken original StarTech 16650 V1 as a
804 * 16550, and why not? Startech doesn't seem to even acknowledge its
805 * existence.)
Thomas Koellerbd71c182007-05-06 14:48:47 -0700806 *
Linus Torvalds1da177e2005-04-16 15:20:36 -0700807 * What evil have men's minds wrought...
808 */
809static void autoconfig_has_efr(struct uart_8250_port *up)
810{
811 unsigned int id1, id2, id3, rev;
812
813 /*
814 * Everything with an EFR has SLEEP
815 */
816 up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP;
817
818 /*
819 * First we check to see if it's an Oxford Semiconductor UART.
820 *
821 * If we have to do this here because some non-National
822 * Semiconductor clone chips lock up if you try writing to the
823 * LSR register (which serial_icr_read does)
824 */
825
826 /*
827 * Check for Oxford Semiconductor 16C950.
828 *
829 * EFR [4] must be set else this test fails.
830 *
831 * This shouldn't be necessary, but Mike Hudson (Exoray@isys.ca)
832 * claims that it's needed for 952 dual UART's (which are not
833 * recommended for new designs).
834 */
835 up->acr = 0;
836 serial_out(up, UART_LCR, 0xBF);
837 serial_out(up, UART_EFR, UART_EFR_ECB);
838 serial_out(up, UART_LCR, 0x00);
839 id1 = serial_icr_read(up, UART_ID1);
840 id2 = serial_icr_read(up, UART_ID2);
841 id3 = serial_icr_read(up, UART_ID3);
842 rev = serial_icr_read(up, UART_REV);
843
844 DEBUG_AUTOCONF("950id=%02x:%02x:%02x:%02x ", id1, id2, id3, rev);
845
846 if (id1 == 0x16 && id2 == 0xC9 &&
847 (id3 == 0x50 || id3 == 0x52 || id3 == 0x54)) {
848 up->port.type = PORT_16C950;
Russell King4ba5e352005-06-23 10:43:04 +0100849
850 /*
851 * Enable work around for the Oxford Semiconductor 952 rev B
852 * chip which causes it to seriously miscalculate baud rates
853 * when DLL is 0.
854 */
855 if (id3 == 0x52 && rev == 0x01)
856 up->bugs |= UART_BUG_QUOT;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700857 return;
858 }
Thomas Koellerbd71c182007-05-06 14:48:47 -0700859
Linus Torvalds1da177e2005-04-16 15:20:36 -0700860 /*
861 * We check for a XR16C850 by setting DLL and DLM to 0, and then
862 * reading back DLL and DLM. The chip type depends on the DLM
863 * value read back:
864 * 0x10 - XR16C850 and the DLL contains the chip revision.
865 * 0x12 - XR16C2850.
866 * 0x14 - XR16C854.
867 */
868 id1 = autoconfig_read_divisor_id(up);
869 DEBUG_AUTOCONF("850id=%04x ", id1);
870
871 id2 = id1 >> 8;
872 if (id2 == 0x10 || id2 == 0x12 || id2 == 0x14) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700873 up->port.type = PORT_16850;
874 return;
875 }
876
877 /*
878 * It wasn't an XR16C850.
879 *
880 * We distinguish between the '654 and the '650 by counting
881 * how many bytes are in the FIFO. I'm using this for now,
882 * since that's the technique that was sent to me in the
883 * serial driver update, but I'm not convinced this works.
884 * I've had problems doing this in the past. -TYT
885 */
886 if (size_fifo(up) == 64)
887 up->port.type = PORT_16654;
888 else
889 up->port.type = PORT_16650V2;
890}
891
892/*
893 * We detected a chip without a FIFO. Only two fall into
894 * this category - the original 8250 and the 16450. The
895 * 16450 has a scratch register (accessible with LCR=0)
896 */
897static void autoconfig_8250(struct uart_8250_port *up)
898{
899 unsigned char scratch, status1, status2;
900
901 up->port.type = PORT_8250;
902
903 scratch = serial_in(up, UART_SCR);
904 serial_outp(up, UART_SCR, 0xa5);
905 status1 = serial_in(up, UART_SCR);
906 serial_outp(up, UART_SCR, 0x5a);
907 status2 = serial_in(up, UART_SCR);
908 serial_outp(up, UART_SCR, scratch);
909
910 if (status1 == 0xa5 && status2 == 0x5a)
911 up->port.type = PORT_16450;
912}
913
914static int broken_efr(struct uart_8250_port *up)
915{
916 /*
917 * Exar ST16C2550 "A2" devices incorrectly detect as
918 * having an EFR, and report an ID of 0x0201. See
919 * http://www.exar.com/info.php?pdf=dan180_oct2004.pdf
920 */
921 if (autoconfig_read_divisor_id(up) == 0x0201 && size_fifo(up) == 16)
922 return 1;
923
924 return 0;
925}
926
927/*
928 * We know that the chip has FIFOs. Does it have an EFR? The
929 * EFR is located in the same register position as the IIR and
930 * we know the top two bits of the IIR are currently set. The
931 * EFR should contain zero. Try to read the EFR.
932 */
933static void autoconfig_16550a(struct uart_8250_port *up)
934{
935 unsigned char status1, status2;
936 unsigned int iersave;
937
938 up->port.type = PORT_16550A;
939 up->capabilities |= UART_CAP_FIFO;
940
941 /*
942 * Check for presence of the EFR when DLAB is set.
943 * Only ST16C650V1 UARTs pass this test.
944 */
945 serial_outp(up, UART_LCR, UART_LCR_DLAB);
946 if (serial_in(up, UART_EFR) == 0) {
947 serial_outp(up, UART_EFR, 0xA8);
948 if (serial_in(up, UART_EFR) != 0) {
949 DEBUG_AUTOCONF("EFRv1 ");
950 up->port.type = PORT_16650;
951 up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP;
952 } else {
953 DEBUG_AUTOCONF("Motorola 8xxx DUART ");
954 }
955 serial_outp(up, UART_EFR, 0);
956 return;
957 }
958
959 /*
960 * Maybe it requires 0xbf to be written to the LCR.
961 * (other ST16C650V2 UARTs, TI16C752A, etc)
962 */
963 serial_outp(up, UART_LCR, 0xBF);
964 if (serial_in(up, UART_EFR) == 0 && !broken_efr(up)) {
965 DEBUG_AUTOCONF("EFRv2 ");
966 autoconfig_has_efr(up);
967 return;
968 }
969
970 /*
971 * Check for a National Semiconductor SuperIO chip.
972 * Attempt to switch to bank 2, read the value of the LOOP bit
973 * from EXCR1. Switch back to bank 0, change it in MCR. Then
974 * switch back to bank 2, read it from EXCR1 again and check
975 * it's changed. If so, set baud_base in EXCR2 to 921600. -- dwmw2
Linus Torvalds1da177e2005-04-16 15:20:36 -0700976 */
977 serial_outp(up, UART_LCR, 0);
978 status1 = serial_in(up, UART_MCR);
979 serial_outp(up, UART_LCR, 0xE0);
980 status2 = serial_in(up, 0x02); /* EXCR1 */
981
982 if (!((status2 ^ status1) & UART_MCR_LOOP)) {
983 serial_outp(up, UART_LCR, 0);
984 serial_outp(up, UART_MCR, status1 ^ UART_MCR_LOOP);
985 serial_outp(up, UART_LCR, 0xE0);
986 status2 = serial_in(up, 0x02); /* EXCR1 */
987 serial_outp(up, UART_LCR, 0);
988 serial_outp(up, UART_MCR, status1);
989
990 if ((status2 ^ status1) & UART_MCR_LOOP) {
David Woodhouse857dde22005-05-21 15:52:23 +0100991 unsigned short quot;
992
Linus Torvalds1da177e2005-04-16 15:20:36 -0700993 serial_outp(up, UART_LCR, 0xE0);
David Woodhouse857dde22005-05-21 15:52:23 +0100994
Jon Anders Haugumb32b19b2006-04-30 11:20:56 +0100995 quot = serial_dl_read(up);
David Woodhouse857dde22005-05-21 15:52:23 +0100996 quot <<= 3;
997
David Woodhouseb5b82df2007-05-17 14:27:39 +0800998 status1 = serial_in(up, 0x04); /* EXCR2 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700999 status1 &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */
1000 status1 |= 0x10; /* 1.625 divisor for baud_base --> 921600 */
1001 serial_outp(up, 0x04, status1);
Thomas Koellerbd71c182007-05-06 14:48:47 -07001002
Jon Anders Haugumb32b19b2006-04-30 11:20:56 +01001003 serial_dl_write(up, quot);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001004
David Woodhouse857dde22005-05-21 15:52:23 +01001005 serial_outp(up, UART_LCR, 0);
1006
1007 up->port.uartclk = 921600*16;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001008 up->port.type = PORT_NS16550A;
1009 up->capabilities |= UART_NATSEMI;
1010 return;
1011 }
1012 }
1013
1014 /*
1015 * No EFR. Try to detect a TI16750, which only sets bit 5 of
1016 * the IIR when 64 byte FIFO mode is enabled when DLAB is set.
1017 * Try setting it with and without DLAB set. Cheap clones
1018 * set bit 5 without DLAB set.
1019 */
1020 serial_outp(up, UART_LCR, 0);
1021 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
1022 status1 = serial_in(up, UART_IIR) >> 5;
1023 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
1024 serial_outp(up, UART_LCR, UART_LCR_DLAB);
1025 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
1026 status2 = serial_in(up, UART_IIR) >> 5;
1027 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
1028 serial_outp(up, UART_LCR, 0);
1029
1030 DEBUG_AUTOCONF("iir1=%d iir2=%d ", status1, status2);
1031
1032 if (status1 == 6 && status2 == 7) {
1033 up->port.type = PORT_16750;
1034 up->capabilities |= UART_CAP_AFE | UART_CAP_SLEEP;
1035 return;
1036 }
1037
1038 /*
1039 * Try writing and reading the UART_IER_UUE bit (b6).
1040 * If it works, this is probably one of the Xscale platform's
1041 * internal UARTs.
1042 * We're going to explicitly set the UUE bit to 0 before
1043 * trying to write and read a 1 just to make sure it's not
1044 * already a 1 and maybe locked there before we even start start.
1045 */
1046 iersave = serial_in(up, UART_IER);
1047 serial_outp(up, UART_IER, iersave & ~UART_IER_UUE);
1048 if (!(serial_in(up, UART_IER) & UART_IER_UUE)) {
1049 /*
1050 * OK it's in a known zero state, try writing and reading
1051 * without disturbing the current state of the other bits.
1052 */
1053 serial_outp(up, UART_IER, iersave | UART_IER_UUE);
1054 if (serial_in(up, UART_IER) & UART_IER_UUE) {
1055 /*
1056 * It's an Xscale.
1057 * We'll leave the UART_IER_UUE bit set to 1 (enabled).
1058 */
1059 DEBUG_AUTOCONF("Xscale ");
1060 up->port.type = PORT_XSCALE;
1061 up->capabilities |= UART_CAP_UUE;
1062 return;
1063 }
1064 } else {
1065 /*
1066 * If we got here we couldn't force the IER_UUE bit to 0.
1067 * Log it and continue.
1068 */
1069 DEBUG_AUTOCONF("Couldn't force IER_UUE to 0 ");
1070 }
1071 serial_outp(up, UART_IER, iersave);
1072}
1073
1074/*
1075 * This routine is called by rs_init() to initialize a specific serial
1076 * port. It determines what type of UART chip this serial port is
1077 * using: 8250, 16450, 16550, 16550A. The important question is
1078 * whether or not this UART is a 16550A or not, since this will
1079 * determine whether or not we can use its FIFO features or not.
1080 */
1081static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
1082{
1083 unsigned char status1, scratch, scratch2, scratch3;
1084 unsigned char save_lcr, save_mcr;
1085 unsigned long flags;
1086
1087 if (!up->port.iobase && !up->port.mapbase && !up->port.membase)
1088 return;
1089
1090 DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04x, 0x%p): ",
David S. Miller84408382008-10-13 10:45:26 +01001091 serial_index(&up->port), up->port.iobase, up->port.membase);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001092
1093 /*
1094 * We really do need global IRQs disabled here - we're going to
1095 * be frobbing the chips IRQ enable register to see if it exists.
1096 */
1097 spin_lock_irqsave(&up->port.lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001098
1099 up->capabilities = 0;
Russell King4ba5e352005-06-23 10:43:04 +01001100 up->bugs = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001101
1102 if (!(up->port.flags & UPF_BUGGY_UART)) {
1103 /*
1104 * Do a simple existence test first; if we fail this,
1105 * there's no point trying anything else.
Thomas Koellerbd71c182007-05-06 14:48:47 -07001106 *
Linus Torvalds1da177e2005-04-16 15:20:36 -07001107 * 0x80 is used as a nonsense port to prevent against
1108 * false positives due to ISA bus float. The
1109 * assumption is that 0x80 is a non-existent port;
1110 * which should be safe since include/asm/io.h also
1111 * makes this assumption.
1112 *
1113 * Note: this is safe as long as MCR bit 4 is clear
1114 * and the device is in "PC" mode.
1115 */
1116 scratch = serial_inp(up, UART_IER);
1117 serial_outp(up, UART_IER, 0);
1118#ifdef __i386__
1119 outb(0xff, 0x080);
1120#endif
Thomas Hoehn48212002007-02-10 01:46:05 -08001121 /*
1122 * Mask out IER[7:4] bits for test as some UARTs (e.g. TL
1123 * 16C754B) allow only to modify them if an EFR bit is set.
1124 */
1125 scratch2 = serial_inp(up, UART_IER) & 0x0f;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001126 serial_outp(up, UART_IER, 0x0F);
1127#ifdef __i386__
1128 outb(0, 0x080);
1129#endif
Thomas Hoehn48212002007-02-10 01:46:05 -08001130 scratch3 = serial_inp(up, UART_IER) & 0x0f;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001131 serial_outp(up, UART_IER, scratch);
1132 if (scratch2 != 0 || scratch3 != 0x0F) {
1133 /*
1134 * We failed; there's nothing here
1135 */
1136 DEBUG_AUTOCONF("IER test failed (%02x, %02x) ",
1137 scratch2, scratch3);
1138 goto out;
1139 }
1140 }
1141
1142 save_mcr = serial_in(up, UART_MCR);
1143 save_lcr = serial_in(up, UART_LCR);
1144
Thomas Koellerbd71c182007-05-06 14:48:47 -07001145 /*
Linus Torvalds1da177e2005-04-16 15:20:36 -07001146 * Check to see if a UART is really there. Certain broken
1147 * internal modems based on the Rockwell chipset fail this
1148 * test, because they apparently don't implement the loopback
1149 * test mode. So this test is skipped on the COM 1 through
1150 * COM 4 ports. This *should* be safe, since no board
1151 * manufacturer would be stupid enough to design a board
1152 * that conflicts with COM 1-4 --- we hope!
1153 */
1154 if (!(up->port.flags & UPF_SKIP_TEST)) {
1155 serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A);
1156 status1 = serial_inp(up, UART_MSR) & 0xF0;
1157 serial_outp(up, UART_MCR, save_mcr);
1158 if (status1 != 0x90) {
1159 DEBUG_AUTOCONF("LOOP test failed (%02x) ",
1160 status1);
1161 goto out;
1162 }
1163 }
1164
1165 /*
1166 * We're pretty sure there's a port here. Lets find out what
1167 * type of port it is. The IIR top two bits allows us to find
Russell King6f0d6182005-09-09 16:17:58 +01001168 * out if it's 8250 or 16450, 16550, 16550A or later. This
Linus Torvalds1da177e2005-04-16 15:20:36 -07001169 * determines what we test for next.
1170 *
1171 * We also initialise the EFR (if any) to zero for later. The
1172 * EFR occupies the same register location as the FCR and IIR.
1173 */
1174 serial_outp(up, UART_LCR, 0xBF);
1175 serial_outp(up, UART_EFR, 0);
1176 serial_outp(up, UART_LCR, 0);
1177
1178 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
1179 scratch = serial_in(up, UART_IIR) >> 6;
1180
1181 DEBUG_AUTOCONF("iir=%d ", scratch);
1182
1183 switch (scratch) {
1184 case 0:
1185 autoconfig_8250(up);
1186 break;
1187 case 1:
1188 up->port.type = PORT_UNKNOWN;
1189 break;
1190 case 2:
1191 up->port.type = PORT_16550;
1192 break;
1193 case 3:
1194 autoconfig_16550a(up);
1195 break;
1196 }
1197
1198#ifdef CONFIG_SERIAL_8250_RSA
1199 /*
1200 * Only probe for RSA ports if we got the region.
1201 */
1202 if (up->port.type == PORT_16550A && probeflags & PROBE_RSA) {
1203 int i;
1204
1205 for (i = 0 ; i < probe_rsa_count; ++i) {
1206 if (probe_rsa[i] == up->port.iobase &&
1207 __enable_rsa(up)) {
1208 up->port.type = PORT_RSA;
1209 break;
1210 }
1211 }
1212 }
1213#endif
Pantelis Antoniou21c614a2005-11-06 09:07:03 +00001214
1215#ifdef CONFIG_SERIAL_8250_AU1X00
1216 /* if access method is AU, it is a 16550 with a quirk */
1217 if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU)
1218 up->bugs |= UART_BUG_NOMSR;
1219#endif
1220
Linus Torvalds1da177e2005-04-16 15:20:36 -07001221 serial_outp(up, UART_LCR, save_lcr);
1222
1223 if (up->capabilities != uart_config[up->port.type].flags) {
1224 printk(KERN_WARNING
1225 "ttyS%d: detected caps %08x should be %08x\n",
David S. Miller84408382008-10-13 10:45:26 +01001226 serial_index(&up->port), up->capabilities,
1227 uart_config[up->port.type].flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001228 }
1229
1230 up->port.fifosize = uart_config[up->port.type].fifo_size;
1231 up->capabilities = uart_config[up->port.type].flags;
1232 up->tx_loadsz = uart_config[up->port.type].tx_loadsz;
1233
1234 if (up->port.type == PORT_UNKNOWN)
1235 goto out;
1236
1237 /*
1238 * Reset the UART.
1239 */
1240#ifdef CONFIG_SERIAL_8250_RSA
1241 if (up->port.type == PORT_RSA)
1242 serial_outp(up, UART_RSA_FRR, 0);
1243#endif
1244 serial_outp(up, UART_MCR, save_mcr);
1245 serial8250_clear_fifos(up);
Alex Williamson40b36da2007-02-14 00:33:04 -08001246 serial_in(up, UART_RX);
Lennert Buytenhek5c8c7552005-11-12 21:58:05 +00001247 if (up->capabilities & UART_CAP_UUE)
1248 serial_outp(up, UART_IER, UART_IER_UUE);
1249 else
1250 serial_outp(up, UART_IER, 0);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001251
Thomas Koellerbd71c182007-05-06 14:48:47 -07001252 out:
Linus Torvalds1da177e2005-04-16 15:20:36 -07001253 spin_unlock_irqrestore(&up->port.lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001254 DEBUG_AUTOCONF("type=%s\n", uart_config[up->port.type].name);
1255}
1256
1257static void autoconfig_irq(struct uart_8250_port *up)
1258{
1259 unsigned char save_mcr, save_ier;
1260 unsigned char save_ICP = 0;
1261 unsigned int ICP = 0;
1262 unsigned long irqs;
1263 int irq;
1264
1265 if (up->port.flags & UPF_FOURPORT) {
1266 ICP = (up->port.iobase & 0xfe0) | 0x1f;
1267 save_ICP = inb_p(ICP);
1268 outb_p(0x80, ICP);
1269 (void) inb_p(ICP);
1270 }
1271
1272 /* forget possible initially masked and pending IRQ */
1273 probe_irq_off(probe_irq_on());
1274 save_mcr = serial_inp(up, UART_MCR);
1275 save_ier = serial_inp(up, UART_IER);
1276 serial_outp(up, UART_MCR, UART_MCR_OUT1 | UART_MCR_OUT2);
Thomas Koellerbd71c182007-05-06 14:48:47 -07001277
Linus Torvalds1da177e2005-04-16 15:20:36 -07001278 irqs = probe_irq_on();
1279 serial_outp(up, UART_MCR, 0);
Alan Cox6f803cd2008-02-08 04:18:52 -08001280 udelay(10);
1281 if (up->port.flags & UPF_FOURPORT) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001282 serial_outp(up, UART_MCR,
1283 UART_MCR_DTR | UART_MCR_RTS);
1284 } else {
1285 serial_outp(up, UART_MCR,
1286 UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2);
1287 }
1288 serial_outp(up, UART_IER, 0x0f); /* enable all intrs */
1289 (void)serial_inp(up, UART_LSR);
1290 (void)serial_inp(up, UART_RX);
1291 (void)serial_inp(up, UART_IIR);
1292 (void)serial_inp(up, UART_MSR);
1293 serial_outp(up, UART_TX, 0xFF);
Alan Cox6f803cd2008-02-08 04:18:52 -08001294 udelay(20);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001295 irq = probe_irq_off(irqs);
1296
1297 serial_outp(up, UART_MCR, save_mcr);
1298 serial_outp(up, UART_IER, save_ier);
1299
1300 if (up->port.flags & UPF_FOURPORT)
1301 outb_p(save_ICP, ICP);
1302
1303 up->port.irq = (irq > 0) ? irq : 0;
1304}
1305
Russell Kinge763b902005-06-29 18:41:51 +01001306static inline void __stop_tx(struct uart_8250_port *p)
1307{
1308 if (p->ier & UART_IER_THRI) {
1309 p->ier &= ~UART_IER_THRI;
1310 serial_out(p, UART_IER, p->ier);
1311 }
1312}
1313
Russell Kingb129a8c2005-08-31 10:12:14 +01001314static void serial8250_stop_tx(struct uart_port *port)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001315{
1316 struct uart_8250_port *up = (struct uart_8250_port *)port;
1317
Russell Kinge763b902005-06-29 18:41:51 +01001318 __stop_tx(up);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001319
1320 /*
Russell Kinge763b902005-06-29 18:41:51 +01001321 * We really want to stop the transmitter from sending.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001322 */
Russell Kinge763b902005-06-29 18:41:51 +01001323 if (up->port.type == PORT_16C950) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001324 up->acr |= UART_ACR_TXDIS;
1325 serial_icr_write(up, UART_ACR, up->acr);
1326 }
1327}
1328
Russell King55d3b282005-06-23 15:05:41 +01001329static void transmit_chars(struct uart_8250_port *up);
1330
Russell Kingb129a8c2005-08-31 10:12:14 +01001331static void serial8250_start_tx(struct uart_port *port)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001332{
1333 struct uart_8250_port *up = (struct uart_8250_port *)port;
1334
1335 if (!(up->ier & UART_IER_THRI)) {
1336 up->ier |= UART_IER_THRI;
1337 serial_out(up, UART_IER, up->ier);
Russell King55d3b282005-06-23 15:05:41 +01001338
Russell King67f76542005-06-23 22:26:43 +01001339 if (up->bugs & UART_BUG_TXEN) {
Russell King55d3b282005-06-23 15:05:41 +01001340 unsigned char lsr, iir;
1341 lsr = serial_in(up, UART_LSR);
Corey Minyardad4c2aa2007-08-22 14:01:18 -07001342 up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
Thomas Koellerbd71c182007-05-06 14:48:47 -07001343 iir = serial_in(up, UART_IIR) & 0x0f;
1344 if ((up->port.type == PORT_RM9000) ?
1345 (lsr & UART_LSR_THRE &&
1346 (iir == UART_IIR_NO_INT || iir == UART_IIR_THRI)) :
1347 (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT))
Russell King55d3b282005-06-23 15:05:41 +01001348 transmit_chars(up);
1349 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001350 }
Russell Kinge763b902005-06-29 18:41:51 +01001351
Linus Torvalds1da177e2005-04-16 15:20:36 -07001352 /*
Russell Kinge763b902005-06-29 18:41:51 +01001353 * Re-enable the transmitter if we disabled it.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001354 */
Russell Kinge763b902005-06-29 18:41:51 +01001355 if (up->port.type == PORT_16C950 && up->acr & UART_ACR_TXDIS) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001356 up->acr &= ~UART_ACR_TXDIS;
1357 serial_icr_write(up, UART_ACR, up->acr);
1358 }
1359}
1360
1361static void serial8250_stop_rx(struct uart_port *port)
1362{
1363 struct uart_8250_port *up = (struct uart_8250_port *)port;
1364
1365 up->ier &= ~UART_IER_RLSI;
1366 up->port.read_status_mask &= ~UART_LSR_DR;
1367 serial_out(up, UART_IER, up->ier);
1368}
1369
1370static void serial8250_enable_ms(struct uart_port *port)
1371{
1372 struct uart_8250_port *up = (struct uart_8250_port *)port;
1373
Pantelis Antoniou21c614a2005-11-06 09:07:03 +00001374 /* no MSR capabilities */
1375 if (up->bugs & UART_BUG_NOMSR)
1376 return;
1377
Linus Torvalds1da177e2005-04-16 15:20:36 -07001378 up->ier |= UART_IER_MSI;
1379 serial_out(up, UART_IER, up->ier);
1380}
1381
Russell Kingea8874d2006-01-04 19:43:24 +00001382static void
Thomas Koellercc79aa92007-02-20 13:58:05 -08001383receive_chars(struct uart_8250_port *up, unsigned int *status)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001384{
Alan Coxebd2c8f2009-09-19 13:13:28 -07001385 struct tty_struct *tty = up->port.state->port.tty;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001386 unsigned char ch, lsr = *status;
1387 int max_count = 256;
1388 char flag;
1389
1390 do {
Aristeu Rozanski7500b1f2008-07-23 21:29:45 -07001391 if (likely(lsr & UART_LSR_DR))
1392 ch = serial_inp(up, UART_RX);
1393 else
1394 /*
1395 * Intel 82571 has a Serial Over Lan device that will
1396 * set UART_LSR_BI without setting UART_LSR_DR when
1397 * it receives a break. To avoid reading from the
1398 * receive buffer without UART_LSR_DR bit set, we
1399 * just force the read character to be 0
1400 */
1401 ch = 0;
1402
Linus Torvalds1da177e2005-04-16 15:20:36 -07001403 flag = TTY_NORMAL;
1404 up->port.icount.rx++;
1405
Corey Minyardad4c2aa2007-08-22 14:01:18 -07001406 lsr |= up->lsr_saved_flags;
1407 up->lsr_saved_flags = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001408
Corey Minyardad4c2aa2007-08-22 14:01:18 -07001409 if (unlikely(lsr & UART_LSR_BRK_ERROR_BITS)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001410 /*
1411 * For statistics only
1412 */
1413 if (lsr & UART_LSR_BI) {
1414 lsr &= ~(UART_LSR_FE | UART_LSR_PE);
1415 up->port.icount.brk++;
1416 /*
1417 * We do the SysRQ and SAK checking
1418 * here because otherwise the break
1419 * may get masked by ignore_status_mask
1420 * or read_status_mask.
1421 */
1422 if (uart_handle_break(&up->port))
1423 goto ignore_char;
1424 } else if (lsr & UART_LSR_PE)
1425 up->port.icount.parity++;
1426 else if (lsr & UART_LSR_FE)
1427 up->port.icount.frame++;
1428 if (lsr & UART_LSR_OE)
1429 up->port.icount.overrun++;
1430
1431 /*
Russell King23907eb2005-04-16 15:26:39 -07001432 * Mask off conditions which should be ignored.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001433 */
1434 lsr &= up->port.read_status_mask;
1435
1436 if (lsr & UART_LSR_BI) {
1437 DEBUG_INTR("handling break....");
1438 flag = TTY_BREAK;
1439 } else if (lsr & UART_LSR_PE)
1440 flag = TTY_PARITY;
1441 else if (lsr & UART_LSR_FE)
1442 flag = TTY_FRAME;
1443 }
David Howells7d12e782006-10-05 14:55:46 +01001444 if (uart_handle_sysrq_char(&up->port, ch))
Linus Torvalds1da177e2005-04-16 15:20:36 -07001445 goto ignore_char;
Russell King05ab3012005-05-09 23:21:59 +01001446
1447 uart_insert_char(&up->port, lsr, UART_LSR_OE, ch, flag);
1448
Alan Cox6f803cd2008-02-08 04:18:52 -08001449ignore_char:
Linus Torvalds1da177e2005-04-16 15:20:36 -07001450 lsr = serial_inp(up, UART_LSR);
Aristeu Rozanski7500b1f2008-07-23 21:29:45 -07001451 } while ((lsr & (UART_LSR_DR | UART_LSR_BI)) && (max_count-- > 0));
Linus Torvalds1da177e2005-04-16 15:20:36 -07001452 spin_unlock(&up->port.lock);
1453 tty_flip_buffer_push(tty);
1454 spin_lock(&up->port.lock);
1455 *status = lsr;
1456}
1457
Russell Kingea8874d2006-01-04 19:43:24 +00001458static void transmit_chars(struct uart_8250_port *up)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001459{
Alan Coxebd2c8f2009-09-19 13:13:28 -07001460 struct circ_buf *xmit = &up->port.state->xmit;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001461 int count;
1462
1463 if (up->port.x_char) {
1464 serial_outp(up, UART_TX, up->port.x_char);
1465 up->port.icount.tx++;
1466 up->port.x_char = 0;
1467 return;
1468 }
Russell Kingb129a8c2005-08-31 10:12:14 +01001469 if (uart_tx_stopped(&up->port)) {
1470 serial8250_stop_tx(&up->port);
1471 return;
1472 }
1473 if (uart_circ_empty(xmit)) {
Russell Kinge763b902005-06-29 18:41:51 +01001474 __stop_tx(up);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001475 return;
1476 }
1477
1478 count = up->tx_loadsz;
1479 do {
1480 serial_out(up, UART_TX, xmit->buf[xmit->tail]);
1481 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
1482 up->port.icount.tx++;
1483 if (uart_circ_empty(xmit))
1484 break;
1485 } while (--count > 0);
1486
1487 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
1488 uart_write_wakeup(&up->port);
1489
1490 DEBUG_INTR("THRE...");
1491
1492 if (uart_circ_empty(xmit))
Russell Kinge763b902005-06-29 18:41:51 +01001493 __stop_tx(up);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001494}
1495
Russell King2af7cd62006-01-04 16:55:09 +00001496static unsigned int check_modem_status(struct uart_8250_port *up)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001497{
Russell King2af7cd62006-01-04 16:55:09 +00001498 unsigned int status = serial_in(up, UART_MSR);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001499
Corey Minyardad4c2aa2007-08-22 14:01:18 -07001500 status |= up->msr_saved_flags;
1501 up->msr_saved_flags = 0;
Taku Izumifdc30b32007-04-23 14:41:00 -07001502 if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI &&
Alan Coxebd2c8f2009-09-19 13:13:28 -07001503 up->port.state != NULL) {
Russell King2af7cd62006-01-04 16:55:09 +00001504 if (status & UART_MSR_TERI)
1505 up->port.icount.rng++;
1506 if (status & UART_MSR_DDSR)
1507 up->port.icount.dsr++;
1508 if (status & UART_MSR_DDCD)
1509 uart_handle_dcd_change(&up->port, status & UART_MSR_DCD);
1510 if (status & UART_MSR_DCTS)
1511 uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001512
Alan Coxebd2c8f2009-09-19 13:13:28 -07001513 wake_up_interruptible(&up->port.state->delta_msr_wait);
Russell King2af7cd62006-01-04 16:55:09 +00001514 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001515
Russell King2af7cd62006-01-04 16:55:09 +00001516 return status;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001517}
1518
1519/*
1520 * This handles the interrupt from one port.
1521 */
Will Newtonb5d674a2008-10-13 10:36:21 +01001522static void serial8250_handle_port(struct uart_8250_port *up)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001523{
Russell King45e24602006-01-04 19:19:06 +00001524 unsigned int status;
Jiri Kosina4bf36312007-04-23 14:41:21 -07001525 unsigned long flags;
Russell King45e24602006-01-04 19:19:06 +00001526
Jiri Kosina4bf36312007-04-23 14:41:21 -07001527 spin_lock_irqsave(&up->port.lock, flags);
Russell King45e24602006-01-04 19:19:06 +00001528
1529 status = serial_inp(up, UART_LSR);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001530
1531 DEBUG_INTR("status = %x...", status);
1532
Aristeu Rozanski7500b1f2008-07-23 21:29:45 -07001533 if (status & (UART_LSR_DR | UART_LSR_BI))
David Howells7d12e782006-10-05 14:55:46 +01001534 receive_chars(up, &status);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001535 check_modem_status(up);
1536 if (status & UART_LSR_THRE)
1537 transmit_chars(up);
Russell King45e24602006-01-04 19:19:06 +00001538
Jiri Kosina4bf36312007-04-23 14:41:21 -07001539 spin_unlock_irqrestore(&up->port.lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001540}
1541
1542/*
1543 * This is the serial driver's interrupt routine.
1544 *
1545 * Arjan thinks the old way was overly complex, so it got simplified.
1546 * Alan disagrees, saying that need the complexity to handle the weird
1547 * nature of ISA shared interrupts. (This is a special exception.)
1548 *
1549 * In order to handle ISA shared interrupts properly, we need to check
1550 * that all ports have been serviced, and therefore the ISA interrupt
1551 * line has been de-asserted.
1552 *
1553 * This means we need to loop through all ports. checking that they
1554 * don't have an interrupt pending.
1555 */
David Howells7d12e782006-10-05 14:55:46 +01001556static irqreturn_t serial8250_interrupt(int irq, void *dev_id)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001557{
1558 struct irq_info *i = dev_id;
1559 struct list_head *l, *end = NULL;
1560 int pass_counter = 0, handled = 0;
1561
1562 DEBUG_INTR("serial8250_interrupt(%d)...", irq);
1563
1564 spin_lock(&i->lock);
1565
1566 l = i->head;
1567 do {
1568 struct uart_8250_port *up;
1569 unsigned int iir;
1570
1571 up = list_entry(l, struct uart_8250_port, list);
1572
1573 iir = serial_in(up, UART_IIR);
1574 if (!(iir & UART_IIR_NO_INT)) {
David Howells7d12e782006-10-05 14:55:46 +01001575 serial8250_handle_port(up);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001576
1577 handled = 1;
1578
1579 end = NULL;
Marc St-Jeanbeab6972007-05-06 14:48:45 -07001580 } else if (up->port.iotype == UPIO_DWAPB &&
1581 (iir & UART_IIR_BUSY) == UART_IIR_BUSY) {
1582 /* The DesignWare APB UART has an Busy Detect (0x07)
1583 * interrupt meaning an LCR write attempt occured while the
1584 * UART was busy. The interrupt must be cleared by reading
1585 * the UART status register (USR) and the LCR re-written. */
1586 unsigned int status;
1587 status = *(volatile u32 *)up->port.private_data;
1588 serial_out(up, UART_LCR, up->lcr);
1589
1590 handled = 1;
1591
1592 end = NULL;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001593 } else if (end == NULL)
1594 end = l;
1595
1596 l = l->next;
1597
1598 if (l == i->head && pass_counter++ > PASS_LIMIT) {
1599 /* If we hit this, we're dead. */
1600 printk(KERN_ERR "serial8250: too much work for "
1601 "irq%d\n", irq);
1602 break;
1603 }
1604 } while (l != end);
1605
1606 spin_unlock(&i->lock);
1607
1608 DEBUG_INTR("end.\n");
1609
1610 return IRQ_RETVAL(handled);
1611}
1612
1613/*
1614 * To support ISA shared interrupts, we need to have one interrupt
1615 * handler that ensures that the IRQ line has been deasserted
1616 * before returning. Failing to do this will result in the IRQ
1617 * line being stuck active, and, since ISA irqs are edge triggered,
1618 * no more IRQs will be seen.
1619 */
1620static void serial_do_unlink(struct irq_info *i, struct uart_8250_port *up)
1621{
1622 spin_lock_irq(&i->lock);
1623
1624 if (!list_empty(i->head)) {
1625 if (i->head == &up->list)
1626 i->head = i->head->next;
1627 list_del(&up->list);
1628 } else {
1629 BUG_ON(i->head != &up->list);
1630 i->head = NULL;
1631 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001632 spin_unlock_irq(&i->lock);
Alan Cox25db8ad2008-08-19 20:49:40 -07001633 /* List empty so throw away the hash node */
1634 if (i->head == NULL) {
1635 hlist_del(&i->node);
1636 kfree(i);
1637 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001638}
1639
1640static int serial_link_irq_chain(struct uart_8250_port *up)
1641{
Alan Cox25db8ad2008-08-19 20:49:40 -07001642 struct hlist_head *h;
1643 struct hlist_node *n;
1644 struct irq_info *i;
Thomas Gleixner40663cc2006-07-01 19:29:43 -07001645 int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? IRQF_SHARED : 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001646
Alan Cox25db8ad2008-08-19 20:49:40 -07001647 mutex_lock(&hash_mutex);
1648
1649 h = &irq_lists[up->port.irq % NR_IRQ_HASH];
1650
1651 hlist_for_each(n, h) {
1652 i = hlist_entry(n, struct irq_info, node);
1653 if (i->irq == up->port.irq)
1654 break;
1655 }
1656
1657 if (n == NULL) {
1658 i = kzalloc(sizeof(struct irq_info), GFP_KERNEL);
1659 if (i == NULL) {
1660 mutex_unlock(&hash_mutex);
1661 return -ENOMEM;
1662 }
1663 spin_lock_init(&i->lock);
1664 i->irq = up->port.irq;
1665 hlist_add_head(&i->node, h);
1666 }
1667 mutex_unlock(&hash_mutex);
1668
Linus Torvalds1da177e2005-04-16 15:20:36 -07001669 spin_lock_irq(&i->lock);
1670
1671 if (i->head) {
1672 list_add(&up->list, i->head);
1673 spin_unlock_irq(&i->lock);
1674
1675 ret = 0;
1676 } else {
1677 INIT_LIST_HEAD(&up->list);
1678 i->head = &up->list;
1679 spin_unlock_irq(&i->lock);
Vikram Pandita1c2f0492009-09-19 13:13:19 -07001680 irq_flags |= up->port.irqflags;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001681 ret = request_irq(up->port.irq, serial8250_interrupt,
1682 irq_flags, "serial", i);
1683 if (ret < 0)
1684 serial_do_unlink(i, up);
1685 }
1686
1687 return ret;
1688}
1689
1690static void serial_unlink_irq_chain(struct uart_8250_port *up)
1691{
Alan Cox25db8ad2008-08-19 20:49:40 -07001692 struct irq_info *i;
1693 struct hlist_node *n;
1694 struct hlist_head *h;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001695
Alan Cox25db8ad2008-08-19 20:49:40 -07001696 mutex_lock(&hash_mutex);
1697
1698 h = &irq_lists[up->port.irq % NR_IRQ_HASH];
1699
1700 hlist_for_each(n, h) {
1701 i = hlist_entry(n, struct irq_info, node);
1702 if (i->irq == up->port.irq)
1703 break;
1704 }
1705
1706 BUG_ON(n == NULL);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001707 BUG_ON(i->head == NULL);
1708
1709 if (list_empty(i->head))
1710 free_irq(up->port.irq, i);
1711
1712 serial_do_unlink(i, up);
Alan Cox25db8ad2008-08-19 20:49:40 -07001713 mutex_unlock(&hash_mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001714}
1715
Alex Williamson40b36da2007-02-14 00:33:04 -08001716/* Base timer interval for polling */
1717static inline int poll_timeout(int timeout)
1718{
1719 return timeout > 6 ? (timeout / 2 - 2) : 1;
1720}
1721
Linus Torvalds1da177e2005-04-16 15:20:36 -07001722/*
1723 * This function is used to handle ports that do not have an
1724 * interrupt. This doesn't work very well for 16450's, but gives
1725 * barely passable results for a 16550A. (Although at the expense
1726 * of much CPU overhead).
1727 */
1728static void serial8250_timeout(unsigned long data)
1729{
1730 struct uart_8250_port *up = (struct uart_8250_port *)data;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001731 unsigned int iir;
1732
1733 iir = serial_in(up, UART_IIR);
Russell King45e24602006-01-04 19:19:06 +00001734 if (!(iir & UART_IIR_NO_INT))
David Howells7d12e782006-10-05 14:55:46 +01001735 serial8250_handle_port(up);
Alex Williamson40b36da2007-02-14 00:33:04 -08001736 mod_timer(&up->timer, jiffies + poll_timeout(up->port.timeout));
1737}
Linus Torvalds1da177e2005-04-16 15:20:36 -07001738
Alex Williamson40b36da2007-02-14 00:33:04 -08001739static void serial8250_backup_timeout(unsigned long data)
1740{
1741 struct uart_8250_port *up = (struct uart_8250_port *)data;
Corey Minyardad4c2aa2007-08-22 14:01:18 -07001742 unsigned int iir, ier = 0, lsr;
1743 unsigned long flags;
Alex Williamson40b36da2007-02-14 00:33:04 -08001744
1745 /*
1746 * Must disable interrupts or else we risk racing with the interrupt
1747 * based handler.
1748 */
1749 if (is_real_interrupt(up->port.irq)) {
1750 ier = serial_in(up, UART_IER);
1751 serial_out(up, UART_IER, 0);
1752 }
1753
1754 iir = serial_in(up, UART_IIR);
1755
1756 /*
1757 * This should be a safe test for anyone who doesn't trust the
1758 * IIR bits on their UART, but it's specifically designed for
1759 * the "Diva" UART used on the management processor on many HP
1760 * ia64 and parisc boxes.
1761 */
Corey Minyardad4c2aa2007-08-22 14:01:18 -07001762 spin_lock_irqsave(&up->port.lock, flags);
1763 lsr = serial_in(up, UART_LSR);
1764 up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
1765 spin_unlock_irqrestore(&up->port.lock, flags);
Alex Williamson40b36da2007-02-14 00:33:04 -08001766 if ((iir & UART_IIR_NO_INT) && (up->ier & UART_IER_THRI) &&
Alan Coxebd2c8f2009-09-19 13:13:28 -07001767 (!uart_circ_empty(&up->port.state->xmit) || up->port.x_char) &&
Corey Minyardad4c2aa2007-08-22 14:01:18 -07001768 (lsr & UART_LSR_THRE)) {
Alex Williamson40b36da2007-02-14 00:33:04 -08001769 iir &= ~(UART_IIR_ID | UART_IIR_NO_INT);
1770 iir |= UART_IIR_THRI;
1771 }
1772
1773 if (!(iir & UART_IIR_NO_INT))
1774 serial8250_handle_port(up);
1775
1776 if (is_real_interrupt(up->port.irq))
1777 serial_out(up, UART_IER, ier);
1778
1779 /* Standard timer interval plus 0.2s to keep the port running */
Alan Cox6f803cd2008-02-08 04:18:52 -08001780 mod_timer(&up->timer,
1781 jiffies + poll_timeout(up->port.timeout) + HZ / 5);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001782}
1783
1784static unsigned int serial8250_tx_empty(struct uart_port *port)
1785{
1786 struct uart_8250_port *up = (struct uart_8250_port *)port;
1787 unsigned long flags;
Corey Minyardad4c2aa2007-08-22 14:01:18 -07001788 unsigned int lsr;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001789
1790 spin_lock_irqsave(&up->port.lock, flags);
Corey Minyardad4c2aa2007-08-22 14:01:18 -07001791 lsr = serial_in(up, UART_LSR);
1792 up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001793 spin_unlock_irqrestore(&up->port.lock, flags);
1794
Corey Minyardad4c2aa2007-08-22 14:01:18 -07001795 return lsr & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001796}
1797
1798static unsigned int serial8250_get_mctrl(struct uart_port *port)
1799{
1800 struct uart_8250_port *up = (struct uart_8250_port *)port;
Russell King2af7cd62006-01-04 16:55:09 +00001801 unsigned int status;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001802 unsigned int ret;
1803
Russell King2af7cd62006-01-04 16:55:09 +00001804 status = check_modem_status(up);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001805
1806 ret = 0;
1807 if (status & UART_MSR_DCD)
1808 ret |= TIOCM_CAR;
1809 if (status & UART_MSR_RI)
1810 ret |= TIOCM_RNG;
1811 if (status & UART_MSR_DSR)
1812 ret |= TIOCM_DSR;
1813 if (status & UART_MSR_CTS)
1814 ret |= TIOCM_CTS;
1815 return ret;
1816}
1817
1818static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
1819{
1820 struct uart_8250_port *up = (struct uart_8250_port *)port;
1821 unsigned char mcr = 0;
1822
1823 if (mctrl & TIOCM_RTS)
1824 mcr |= UART_MCR_RTS;
1825 if (mctrl & TIOCM_DTR)
1826 mcr |= UART_MCR_DTR;
1827 if (mctrl & TIOCM_OUT1)
1828 mcr |= UART_MCR_OUT1;
1829 if (mctrl & TIOCM_OUT2)
1830 mcr |= UART_MCR_OUT2;
1831 if (mctrl & TIOCM_LOOP)
1832 mcr |= UART_MCR_LOOP;
1833
1834 mcr = (mcr & up->mcr_mask) | up->mcr_force | up->mcr;
1835
1836 serial_out(up, UART_MCR, mcr);
1837}
1838
1839static void serial8250_break_ctl(struct uart_port *port, int break_state)
1840{
1841 struct uart_8250_port *up = (struct uart_8250_port *)port;
1842 unsigned long flags;
1843
1844 spin_lock_irqsave(&up->port.lock, flags);
1845 if (break_state == -1)
1846 up->lcr |= UART_LCR_SBC;
1847 else
1848 up->lcr &= ~UART_LCR_SBC;
1849 serial_out(up, UART_LCR, up->lcr);
1850 spin_unlock_irqrestore(&up->port.lock, flags);
1851}
1852
Alex Williamson40b36da2007-02-14 00:33:04 -08001853#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
1854
1855/*
1856 * Wait for transmitter & holding register to empty
1857 */
Will Newtonb5d674a2008-10-13 10:36:21 +01001858static void wait_for_xmitr(struct uart_8250_port *up, int bits)
Alex Williamson40b36da2007-02-14 00:33:04 -08001859{
1860 unsigned int status, tmout = 10000;
1861
1862 /* Wait up to 10ms for the character(s) to be sent. */
1863 do {
1864 status = serial_in(up, UART_LSR);
1865
Corey Minyardad4c2aa2007-08-22 14:01:18 -07001866 up->lsr_saved_flags |= status & LSR_SAVE_FLAGS;
Alex Williamson40b36da2007-02-14 00:33:04 -08001867
1868 if (--tmout == 0)
1869 break;
1870 udelay(1);
1871 } while ((status & bits) != bits);
1872
1873 /* Wait up to 1s for flow control if necessary */
1874 if (up->port.flags & UPF_CONS_FLOW) {
Corey Minyardad4c2aa2007-08-22 14:01:18 -07001875 unsigned int tmout;
1876 for (tmout = 1000000; tmout; tmout--) {
1877 unsigned int msr = serial_in(up, UART_MSR);
1878 up->msr_saved_flags |= msr & MSR_SAVE_FLAGS;
1879 if (msr & UART_MSR_CTS)
1880 break;
Alex Williamson40b36da2007-02-14 00:33:04 -08001881 udelay(1);
1882 touch_nmi_watchdog();
1883 }
1884 }
1885}
1886
Jason Wesself2d937f2008-04-17 20:05:37 +02001887#ifdef CONFIG_CONSOLE_POLL
1888/*
1889 * Console polling routines for writing and reading from the uart while
1890 * in an interrupt or debug context.
1891 */
1892
1893static int serial8250_get_poll_char(struct uart_port *port)
1894{
1895 struct uart_8250_port *up = (struct uart_8250_port *)port;
1896 unsigned char lsr = serial_inp(up, UART_LSR);
1897
1898 while (!(lsr & UART_LSR_DR))
1899 lsr = serial_inp(up, UART_LSR);
1900
1901 return serial_inp(up, UART_RX);
1902}
1903
1904
1905static void serial8250_put_poll_char(struct uart_port *port,
1906 unsigned char c)
1907{
1908 unsigned int ier;
1909 struct uart_8250_port *up = (struct uart_8250_port *)port;
1910
1911 /*
1912 * First save the IER then disable the interrupts
1913 */
1914 ier = serial_in(up, UART_IER);
1915 if (up->capabilities & UART_CAP_UUE)
1916 serial_out(up, UART_IER, UART_IER_UUE);
1917 else
1918 serial_out(up, UART_IER, 0);
1919
1920 wait_for_xmitr(up, BOTH_EMPTY);
1921 /*
1922 * Send the character out.
1923 * If a LF, also do CR...
1924 */
1925 serial_out(up, UART_TX, c);
1926 if (c == 10) {
1927 wait_for_xmitr(up, BOTH_EMPTY);
1928 serial_out(up, UART_TX, 13);
1929 }
1930
1931 /*
1932 * Finally, wait for transmitter to become empty
1933 * and restore the IER
1934 */
1935 wait_for_xmitr(up, BOTH_EMPTY);
1936 serial_out(up, UART_IER, ier);
1937}
1938
1939#endif /* CONFIG_CONSOLE_POLL */
1940
Linus Torvalds1da177e2005-04-16 15:20:36 -07001941static int serial8250_startup(struct uart_port *port)
1942{
1943 struct uart_8250_port *up = (struct uart_8250_port *)port;
1944 unsigned long flags;
Russell King55d3b282005-06-23 15:05:41 +01001945 unsigned char lsr, iir;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001946 int retval;
1947
1948 up->capabilities = uart_config[up->port.type].flags;
1949 up->mcr = 0;
1950
Alan Coxb8e7e402009-05-28 14:01:35 +01001951 if (up->port.iotype != up->cur_iotype)
1952 set_io_from_upio(port);
1953
Linus Torvalds1da177e2005-04-16 15:20:36 -07001954 if (up->port.type == PORT_16C950) {
1955 /* Wake up and initialize UART */
1956 up->acr = 0;
1957 serial_outp(up, UART_LCR, 0xBF);
1958 serial_outp(up, UART_EFR, UART_EFR_ECB);
1959 serial_outp(up, UART_IER, 0);
1960 serial_outp(up, UART_LCR, 0);
1961 serial_icr_write(up, UART_CSR, 0); /* Reset the UART */
1962 serial_outp(up, UART_LCR, 0xBF);
1963 serial_outp(up, UART_EFR, UART_EFR_ECB);
1964 serial_outp(up, UART_LCR, 0);
1965 }
1966
1967#ifdef CONFIG_SERIAL_8250_RSA
1968 /*
1969 * If this is an RSA port, see if we can kick it up to the
1970 * higher speed clock.
1971 */
1972 enable_rsa(up);
1973#endif
1974
1975 /*
1976 * Clear the FIFO buffers and disable them.
Alexey Dobriyan7f927fc2006-03-28 01:56:53 -08001977 * (they will be reenabled in set_termios())
Linus Torvalds1da177e2005-04-16 15:20:36 -07001978 */
1979 serial8250_clear_fifos(up);
1980
1981 /*
1982 * Clear the interrupt registers.
1983 */
1984 (void) serial_inp(up, UART_LSR);
1985 (void) serial_inp(up, UART_RX);
1986 (void) serial_inp(up, UART_IIR);
1987 (void) serial_inp(up, UART_MSR);
1988
1989 /*
1990 * At this point, there's no way the LSR could still be 0xff;
1991 * if it is, then bail out, because there's likely no UART
1992 * here.
1993 */
1994 if (!(up->port.flags & UPF_BUGGY_UART) &&
1995 (serial_inp(up, UART_LSR) == 0xff)) {
David S. Miller84408382008-10-13 10:45:26 +01001996 printk(KERN_INFO "ttyS%d: LSR safety check engaged!\n",
1997 serial_index(&up->port));
Linus Torvalds1da177e2005-04-16 15:20:36 -07001998 return -ENODEV;
1999 }
2000
2001 /*
2002 * For a XR16C850, we need to set the trigger levels
2003 */
2004 if (up->port.type == PORT_16850) {
2005 unsigned char fctr;
2006
2007 serial_outp(up, UART_LCR, 0xbf);
2008
2009 fctr = serial_inp(up, UART_FCTR) & ~(UART_FCTR_RX|UART_FCTR_TX);
2010 serial_outp(up, UART_FCTR, fctr | UART_FCTR_TRGD | UART_FCTR_RX);
2011 serial_outp(up, UART_TRG, UART_TRG_96);
2012 serial_outp(up, UART_FCTR, fctr | UART_FCTR_TRGD | UART_FCTR_TX);
2013 serial_outp(up, UART_TRG, UART_TRG_96);
2014
2015 serial_outp(up, UART_LCR, 0);
2016 }
2017
Alex Williamson40b36da2007-02-14 00:33:04 -08002018 if (is_real_interrupt(up->port.irq)) {
Alex Williamson01c194d2008-04-28 02:14:09 -07002019 unsigned char iir1;
Alex Williamson40b36da2007-02-14 00:33:04 -08002020 /*
2021 * Test for UARTs that do not reassert THRE when the
2022 * transmitter is idle and the interrupt has already
2023 * been cleared. Real 16550s should always reassert
2024 * this interrupt whenever the transmitter is idle and
2025 * the interrupt is enabled. Delays are necessary to
2026 * allow register changes to become visible.
2027 */
Borislav Petkovc389d272008-07-29 22:33:32 -07002028 spin_lock_irqsave(&up->port.lock, flags);
Vikram Pandita1c2f0492009-09-19 13:13:19 -07002029 if (up->port.irqflags & IRQF_SHARED)
Anton Vorontsov768aec02008-07-22 11:21:07 +01002030 disable_irq_nosync(up->port.irq);
Alex Williamson40b36da2007-02-14 00:33:04 -08002031
2032 wait_for_xmitr(up, UART_LSR_THRE);
2033 serial_out_sync(up, UART_IER, UART_IER_THRI);
2034 udelay(1); /* allow THRE to set */
Alex Williamson01c194d2008-04-28 02:14:09 -07002035 iir1 = serial_in(up, UART_IIR);
Alex Williamson40b36da2007-02-14 00:33:04 -08002036 serial_out(up, UART_IER, 0);
2037 serial_out_sync(up, UART_IER, UART_IER_THRI);
2038 udelay(1); /* allow a working UART time to re-assert THRE */
2039 iir = serial_in(up, UART_IIR);
2040 serial_out(up, UART_IER, 0);
2041
Vikram Pandita1c2f0492009-09-19 13:13:19 -07002042 if (up->port.irqflags & IRQF_SHARED)
Anton Vorontsov768aec02008-07-22 11:21:07 +01002043 enable_irq(up->port.irq);
Borislav Petkovc389d272008-07-29 22:33:32 -07002044 spin_unlock_irqrestore(&up->port.lock, flags);
Alex Williamson40b36da2007-02-14 00:33:04 -08002045
2046 /*
2047 * If the interrupt is not reasserted, setup a timer to
2048 * kick the UART on a regular basis.
2049 */
Alex Williamson01c194d2008-04-28 02:14:09 -07002050 if (!(iir1 & UART_IIR_NO_INT) && (iir & UART_IIR_NO_INT)) {
Will Newton363f66f2008-09-02 14:35:44 -07002051 up->bugs |= UART_BUG_THRE;
David S. Miller84408382008-10-13 10:45:26 +01002052 pr_debug("ttyS%d - using backup timer\n",
2053 serial_index(port));
Alex Williamson40b36da2007-02-14 00:33:04 -08002054 }
2055 }
2056
Linus Torvalds1da177e2005-04-16 15:20:36 -07002057 /*
Will Newton363f66f2008-09-02 14:35:44 -07002058 * The above check will only give an accurate result the first time
2059 * the port is opened so this value needs to be preserved.
2060 */
2061 if (up->bugs & UART_BUG_THRE) {
2062 up->timer.function = serial8250_backup_timeout;
2063 up->timer.data = (unsigned long)up;
2064 mod_timer(&up->timer, jiffies +
2065 poll_timeout(up->port.timeout) + HZ / 5);
2066 }
2067
2068 /*
Linus Torvalds1da177e2005-04-16 15:20:36 -07002069 * If the "interrupt" for this port doesn't correspond with any
2070 * hardware interrupt, we use a timer-based system. The original
2071 * driver used to do this with IRQ0.
2072 */
2073 if (!is_real_interrupt(up->port.irq)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002074 up->timer.data = (unsigned long)up;
Alex Williamson40b36da2007-02-14 00:33:04 -08002075 mod_timer(&up->timer, jiffies + poll_timeout(up->port.timeout));
Linus Torvalds1da177e2005-04-16 15:20:36 -07002076 } else {
2077 retval = serial_link_irq_chain(up);
2078 if (retval)
2079 return retval;
2080 }
2081
2082 /*
2083 * Now, initialize the UART
2084 */
2085 serial_outp(up, UART_LCR, UART_LCR_WLEN8);
2086
2087 spin_lock_irqsave(&up->port.lock, flags);
2088 if (up->port.flags & UPF_FOURPORT) {
2089 if (!is_real_interrupt(up->port.irq))
2090 up->port.mctrl |= TIOCM_OUT1;
2091 } else
2092 /*
2093 * Most PC uarts need OUT2 raised to enable interrupts.
2094 */
2095 if (is_real_interrupt(up->port.irq))
2096 up->port.mctrl |= TIOCM_OUT2;
2097
2098 serial8250_set_mctrl(&up->port, up->port.mctrl);
Russell King55d3b282005-06-23 15:05:41 +01002099
Mauro Carvalho Chehabb6adea32009-02-20 15:38:52 -08002100 /* Serial over Lan (SoL) hack:
2101 Intel 8257x Gigabit ethernet chips have a
2102 16550 emulation, to be used for Serial Over Lan.
2103 Those chips take a longer time than a normal
2104 serial device to signalize that a transmission
2105 data was queued. Due to that, the above test generally
2106 fails. One solution would be to delay the reading of
2107 iir. However, this is not reliable, since the timeout
2108 is variable. So, let's just don't test if we receive
2109 TX irq. This way, we'll never enable UART_BUG_TXEN.
2110 */
2111 if (up->port.flags & UPF_NO_TXEN_TEST)
2112 goto dont_test_tx_en;
2113
Russell King55d3b282005-06-23 15:05:41 +01002114 /*
2115 * Do a quick test to see if we receive an
2116 * interrupt when we enable the TX irq.
2117 */
2118 serial_outp(up, UART_IER, UART_IER_THRI);
2119 lsr = serial_in(up, UART_LSR);
2120 iir = serial_in(up, UART_IIR);
2121 serial_outp(up, UART_IER, 0);
2122
2123 if (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT) {
Russell King67f76542005-06-23 22:26:43 +01002124 if (!(up->bugs & UART_BUG_TXEN)) {
2125 up->bugs |= UART_BUG_TXEN;
Russell King55d3b282005-06-23 15:05:41 +01002126 pr_debug("ttyS%d - enabling bad tx status workarounds\n",
David S. Miller84408382008-10-13 10:45:26 +01002127 serial_index(port));
Russell King55d3b282005-06-23 15:05:41 +01002128 }
2129 } else {
Russell King67f76542005-06-23 22:26:43 +01002130 up->bugs &= ~UART_BUG_TXEN;
Russell King55d3b282005-06-23 15:05:41 +01002131 }
2132
Mauro Carvalho Chehabb6adea32009-02-20 15:38:52 -08002133dont_test_tx_en:
Linus Torvalds1da177e2005-04-16 15:20:36 -07002134 spin_unlock_irqrestore(&up->port.lock, flags);
2135
2136 /*
Corey Minyardad4c2aa2007-08-22 14:01:18 -07002137 * Clear the interrupt registers again for luck, and clear the
2138 * saved flags to avoid getting false values from polling
2139 * routines or the previous session.
2140 */
2141 serial_inp(up, UART_LSR);
2142 serial_inp(up, UART_RX);
2143 serial_inp(up, UART_IIR);
2144 serial_inp(up, UART_MSR);
2145 up->lsr_saved_flags = 0;
2146 up->msr_saved_flags = 0;
2147
2148 /*
Linus Torvalds1da177e2005-04-16 15:20:36 -07002149 * Finally, enable interrupts. Note: Modem status interrupts
2150 * are set via set_termios(), which will be occurring imminently
2151 * anyway, so we don't enable them here.
2152 */
2153 up->ier = UART_IER_RLSI | UART_IER_RDI;
2154 serial_outp(up, UART_IER, up->ier);
2155
2156 if (up->port.flags & UPF_FOURPORT) {
2157 unsigned int icp;
2158 /*
2159 * Enable interrupts on the AST Fourport board
2160 */
2161 icp = (up->port.iobase & 0xfe0) | 0x01f;
2162 outb_p(0x80, icp);
2163 (void) inb_p(icp);
2164 }
2165
Linus Torvalds1da177e2005-04-16 15:20:36 -07002166 return 0;
2167}
2168
2169static void serial8250_shutdown(struct uart_port *port)
2170{
2171 struct uart_8250_port *up = (struct uart_8250_port *)port;
2172 unsigned long flags;
2173
2174 /*
2175 * Disable interrupts from this port
2176 */
2177 up->ier = 0;
2178 serial_outp(up, UART_IER, 0);
2179
2180 spin_lock_irqsave(&up->port.lock, flags);
2181 if (up->port.flags & UPF_FOURPORT) {
2182 /* reset interrupts on the AST Fourport board */
2183 inb((up->port.iobase & 0xfe0) | 0x1f);
2184 up->port.mctrl |= TIOCM_OUT1;
2185 } else
2186 up->port.mctrl &= ~TIOCM_OUT2;
2187
2188 serial8250_set_mctrl(&up->port, up->port.mctrl);
2189 spin_unlock_irqrestore(&up->port.lock, flags);
2190
2191 /*
2192 * Disable break condition and FIFOs
2193 */
2194 serial_out(up, UART_LCR, serial_inp(up, UART_LCR) & ~UART_LCR_SBC);
2195 serial8250_clear_fifos(up);
2196
2197#ifdef CONFIG_SERIAL_8250_RSA
2198 /*
2199 * Reset the RSA board back to 115kbps compat mode.
2200 */
2201 disable_rsa(up);
2202#endif
2203
2204 /*
2205 * Read data port to reset things, and then unlink from
2206 * the IRQ chain.
2207 */
2208 (void) serial_in(up, UART_RX);
2209
Alex Williamson40b36da2007-02-14 00:33:04 -08002210 del_timer_sync(&up->timer);
2211 up->timer.function = serial8250_timeout;
2212 if (is_real_interrupt(up->port.irq))
Linus Torvalds1da177e2005-04-16 15:20:36 -07002213 serial_unlink_irq_chain(up);
2214}
2215
2216static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int baud)
2217{
2218 unsigned int quot;
2219
2220 /*
2221 * Handle magic divisors for baud rates above baud_base on
2222 * SMSC SuperIO chips.
2223 */
2224 if ((port->flags & UPF_MAGIC_MULTIPLIER) &&
2225 baud == (port->uartclk/4))
2226 quot = 0x8001;
2227 else if ((port->flags & UPF_MAGIC_MULTIPLIER) &&
2228 baud == (port->uartclk/8))
2229 quot = 0x8002;
2230 else
2231 quot = uart_get_divisor(port, baud);
2232
2233 return quot;
2234}
2235
2236static void
Alan Cox606d0992006-12-08 02:38:45 -08002237serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
2238 struct ktermios *old)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002239{
2240 struct uart_8250_port *up = (struct uart_8250_port *)port;
2241 unsigned char cval, fcr = 0;
2242 unsigned long flags;
2243 unsigned int baud, quot;
2244
2245 switch (termios->c_cflag & CSIZE) {
2246 case CS5:
Russell King0a8b80c52005-06-24 19:48:22 +01002247 cval = UART_LCR_WLEN5;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002248 break;
2249 case CS6:
Russell King0a8b80c52005-06-24 19:48:22 +01002250 cval = UART_LCR_WLEN6;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002251 break;
2252 case CS7:
Russell King0a8b80c52005-06-24 19:48:22 +01002253 cval = UART_LCR_WLEN7;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002254 break;
2255 default:
2256 case CS8:
Russell King0a8b80c52005-06-24 19:48:22 +01002257 cval = UART_LCR_WLEN8;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002258 break;
2259 }
2260
2261 if (termios->c_cflag & CSTOPB)
Russell King0a8b80c52005-06-24 19:48:22 +01002262 cval |= UART_LCR_STOP;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002263 if (termios->c_cflag & PARENB)
2264 cval |= UART_LCR_PARITY;
2265 if (!(termios->c_cflag & PARODD))
2266 cval |= UART_LCR_EPAR;
2267#ifdef CMSPAR
2268 if (termios->c_cflag & CMSPAR)
2269 cval |= UART_LCR_SPAR;
2270#endif
2271
2272 /*
2273 * Ask the core to calculate the divisor for us.
2274 */
Anton Vorontsov24d481e2009-09-19 13:13:20 -07002275 baud = uart_get_baud_rate(port, termios, old,
2276 port->uartclk / 16 / 0xffff,
2277 port->uartclk / 16);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002278 quot = serial8250_get_divisor(port, baud);
2279
2280 /*
Russell King4ba5e352005-06-23 10:43:04 +01002281 * Oxford Semi 952 rev B workaround
Linus Torvalds1da177e2005-04-16 15:20:36 -07002282 */
Russell King4ba5e352005-06-23 10:43:04 +01002283 if (up->bugs & UART_BUG_QUOT && (quot & 0xff) == 0)
Alan Cox3e8d4e22008-02-04 22:27:53 -08002284 quot++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002285
2286 if (up->capabilities & UART_CAP_FIFO && up->port.fifosize > 1) {
2287 if (baud < 2400)
2288 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1;
2289 else
2290 fcr = uart_config[up->port.type].fcr;
2291 }
2292
2293 /*
2294 * MCR-based auto flow control. When AFE is enabled, RTS will be
2295 * deasserted when the receive FIFO contains more characters than
2296 * the trigger, or the MCR RTS bit is cleared. In the case where
2297 * the remote UART is not using CTS auto flow control, we must
2298 * have sufficient FIFO entries for the latency of the remote
2299 * UART to respond. IOW, at least 32 bytes of FIFO.
2300 */
2301 if (up->capabilities & UART_CAP_AFE && up->port.fifosize >= 32) {
2302 up->mcr &= ~UART_MCR_AFE;
2303 if (termios->c_cflag & CRTSCTS)
2304 up->mcr |= UART_MCR_AFE;
2305 }
2306
2307 /*
2308 * Ok, we're now changing the port state. Do it with
2309 * interrupts disabled.
2310 */
2311 spin_lock_irqsave(&up->port.lock, flags);
2312
2313 /*
2314 * Update the per-port timeout.
2315 */
2316 uart_update_timeout(port, termios->c_cflag, baud);
2317
2318 up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
2319 if (termios->c_iflag & INPCK)
2320 up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
2321 if (termios->c_iflag & (BRKINT | PARMRK))
2322 up->port.read_status_mask |= UART_LSR_BI;
2323
2324 /*
2325 * Characteres to ignore
2326 */
2327 up->port.ignore_status_mask = 0;
2328 if (termios->c_iflag & IGNPAR)
2329 up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
2330 if (termios->c_iflag & IGNBRK) {
2331 up->port.ignore_status_mask |= UART_LSR_BI;
2332 /*
2333 * If we're ignoring parity and break indicators,
2334 * ignore overruns too (for real raw support).
2335 */
2336 if (termios->c_iflag & IGNPAR)
2337 up->port.ignore_status_mask |= UART_LSR_OE;
2338 }
2339
2340 /*
2341 * ignore all characters if CREAD is not set
2342 */
2343 if ((termios->c_cflag & CREAD) == 0)
2344 up->port.ignore_status_mask |= UART_LSR_DR;
2345
2346 /*
2347 * CTS flow control flag and modem status interrupts
2348 */
2349 up->ier &= ~UART_IER_MSI;
Pantelis Antoniou21c614a2005-11-06 09:07:03 +00002350 if (!(up->bugs & UART_BUG_NOMSR) &&
2351 UART_ENABLE_MS(&up->port, termios->c_cflag))
Linus Torvalds1da177e2005-04-16 15:20:36 -07002352 up->ier |= UART_IER_MSI;
2353 if (up->capabilities & UART_CAP_UUE)
2354 up->ier |= UART_IER_UUE | UART_IER_RTOIE;
2355
2356 serial_out(up, UART_IER, up->ier);
2357
2358 if (up->capabilities & UART_CAP_EFR) {
2359 unsigned char efr = 0;
2360 /*
2361 * TI16C752/Startech hardware flow control. FIXME:
2362 * - TI16C752 requires control thresholds to be set.
2363 * - UART_MCR_RTS is ineffective if auto-RTS mode is enabled.
2364 */
2365 if (termios->c_cflag & CRTSCTS)
2366 efr |= UART_EFR_CTS;
2367
2368 serial_outp(up, UART_LCR, 0xBF);
2369 serial_outp(up, UART_EFR, efr);
2370 }
2371
Russell Kingf2eda272008-09-01 21:47:59 +01002372#ifdef CONFIG_ARCH_OMAP
Jonathan McDowell255341c2006-08-14 23:05:32 -07002373 /* Workaround to enable 115200 baud on OMAP1510 internal ports */
Russell King56685452008-09-01 21:25:33 +01002374 if (cpu_is_omap1510() && is_omap_port(up)) {
Jonathan McDowell255341c2006-08-14 23:05:32 -07002375 if (baud == 115200) {
2376 quot = 1;
2377 serial_out(up, UART_OMAP_OSC_12M_SEL, 1);
2378 } else
2379 serial_out(up, UART_OMAP_OSC_12M_SEL, 0);
2380 }
2381#endif
2382
Linus Torvalds1da177e2005-04-16 15:20:36 -07002383 if (up->capabilities & UART_NATSEMI) {
2384 /* Switch to bank 2 not bank 1, to avoid resetting EXCR2 */
2385 serial_outp(up, UART_LCR, 0xe0);
2386 } else {
2387 serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */
2388 }
2389
Jon Anders Haugumb32b19b2006-04-30 11:20:56 +01002390 serial_dl_write(up, quot);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002391
2392 /*
2393 * LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR
2394 * is written without DLAB set, this mode will be disabled.
2395 */
2396 if (up->port.type == PORT_16750)
2397 serial_outp(up, UART_FCR, fcr);
2398
2399 serial_outp(up, UART_LCR, cval); /* reset DLAB */
2400 up->lcr = cval; /* Save LCR */
2401 if (up->port.type != PORT_16750) {
2402 if (fcr & UART_FCR_ENABLE_FIFO) {
2403 /* emulated UARTs (Lucent Venus 167x) need two steps */
2404 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
2405 }
2406 serial_outp(up, UART_FCR, fcr); /* set fcr */
2407 }
2408 serial8250_set_mctrl(&up->port, up->port.mctrl);
2409 spin_unlock_irqrestore(&up->port.lock, flags);
Alan Coxe991a2b2008-04-28 02:14:06 -07002410 /* Don't rewrite B0 */
2411 if (tty_termios_baud_rate(termios))
2412 tty_termios_encode_baud_rate(termios, baud, baud);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002413}
2414
2415static void
2416serial8250_pm(struct uart_port *port, unsigned int state,
2417 unsigned int oldstate)
2418{
2419 struct uart_8250_port *p = (struct uart_8250_port *)port;
2420
2421 serial8250_set_sleep(p, state != 0);
2422
2423 if (p->pm)
2424 p->pm(port, state, oldstate);
2425}
2426
Russell Kingf2eda272008-09-01 21:47:59 +01002427static unsigned int serial8250_port_size(struct uart_8250_port *pt)
2428{
2429 if (pt->port.iotype == UPIO_AU)
2430 return 0x100000;
2431#ifdef CONFIG_ARCH_OMAP
2432 if (is_omap_port(pt))
2433 return 0x16 << pt->port.regshift;
2434#endif
2435 return 8 << pt->port.regshift;
2436}
2437
Linus Torvalds1da177e2005-04-16 15:20:36 -07002438/*
2439 * Resource handling.
2440 */
2441static int serial8250_request_std_resource(struct uart_8250_port *up)
2442{
Russell Kingf2eda272008-09-01 21:47:59 +01002443 unsigned int size = serial8250_port_size(up);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002444 int ret = 0;
2445
2446 switch (up->port.iotype) {
Sergei Shtylyov85835f42006-04-30 11:15:58 +01002447 case UPIO_AU:
Sergei Shtylyov0b30d662006-09-09 22:23:56 +04002448 case UPIO_TSI:
2449 case UPIO_MEM32:
Linus Torvalds1da177e2005-04-16 15:20:36 -07002450 case UPIO_MEM:
Marc St-Jeanbeab6972007-05-06 14:48:45 -07002451 case UPIO_DWAPB:
Linus Torvalds1da177e2005-04-16 15:20:36 -07002452 if (!up->port.mapbase)
2453 break;
2454
2455 if (!request_mem_region(up->port.mapbase, size, "serial")) {
2456 ret = -EBUSY;
2457 break;
2458 }
2459
2460 if (up->port.flags & UPF_IOREMAP) {
Alan Cox6f441fe2008-05-01 04:34:59 -07002461 up->port.membase = ioremap_nocache(up->port.mapbase,
2462 size);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002463 if (!up->port.membase) {
2464 release_mem_region(up->port.mapbase, size);
2465 ret = -ENOMEM;
2466 }
2467 }
2468 break;
2469
2470 case UPIO_HUB6:
2471 case UPIO_PORT:
2472 if (!request_region(up->port.iobase, size, "serial"))
2473 ret = -EBUSY;
2474 break;
2475 }
2476 return ret;
2477}
2478
2479static void serial8250_release_std_resource(struct uart_8250_port *up)
2480{
Russell Kingf2eda272008-09-01 21:47:59 +01002481 unsigned int size = serial8250_port_size(up);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002482
2483 switch (up->port.iotype) {
Sergei Shtylyov85835f42006-04-30 11:15:58 +01002484 case UPIO_AU:
Sergei Shtylyov0b30d662006-09-09 22:23:56 +04002485 case UPIO_TSI:
2486 case UPIO_MEM32:
Linus Torvalds1da177e2005-04-16 15:20:36 -07002487 case UPIO_MEM:
Marc St-Jeanbeab6972007-05-06 14:48:45 -07002488 case UPIO_DWAPB:
Linus Torvalds1da177e2005-04-16 15:20:36 -07002489 if (!up->port.mapbase)
2490 break;
2491
2492 if (up->port.flags & UPF_IOREMAP) {
2493 iounmap(up->port.membase);
2494 up->port.membase = NULL;
2495 }
2496
2497 release_mem_region(up->port.mapbase, size);
2498 break;
2499
2500 case UPIO_HUB6:
2501 case UPIO_PORT:
2502 release_region(up->port.iobase, size);
2503 break;
2504 }
2505}
2506
2507static int serial8250_request_rsa_resource(struct uart_8250_port *up)
2508{
2509 unsigned long start = UART_RSA_BASE << up->port.regshift;
2510 unsigned int size = 8 << up->port.regshift;
Sergei Shtylyov0b30d662006-09-09 22:23:56 +04002511 int ret = -EINVAL;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002512
2513 switch (up->port.iotype) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002514 case UPIO_HUB6:
2515 case UPIO_PORT:
2516 start += up->port.iobase;
Sergei Shtylyov0b30d662006-09-09 22:23:56 +04002517 if (request_region(start, size, "serial-rsa"))
2518 ret = 0;
2519 else
Linus Torvalds1da177e2005-04-16 15:20:36 -07002520 ret = -EBUSY;
2521 break;
2522 }
2523
2524 return ret;
2525}
2526
2527static void serial8250_release_rsa_resource(struct uart_8250_port *up)
2528{
2529 unsigned long offset = UART_RSA_BASE << up->port.regshift;
2530 unsigned int size = 8 << up->port.regshift;
2531
2532 switch (up->port.iotype) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002533 case UPIO_HUB6:
2534 case UPIO_PORT:
2535 release_region(up->port.iobase + offset, size);
2536 break;
2537 }
2538}
2539
2540static void serial8250_release_port(struct uart_port *port)
2541{
2542 struct uart_8250_port *up = (struct uart_8250_port *)port;
2543
2544 serial8250_release_std_resource(up);
2545 if (up->port.type == PORT_RSA)
2546 serial8250_release_rsa_resource(up);
2547}
2548
2549static int serial8250_request_port(struct uart_port *port)
2550{
2551 struct uart_8250_port *up = (struct uart_8250_port *)port;
2552 int ret = 0;
2553
2554 ret = serial8250_request_std_resource(up);
2555 if (ret == 0 && up->port.type == PORT_RSA) {
2556 ret = serial8250_request_rsa_resource(up);
2557 if (ret < 0)
2558 serial8250_release_std_resource(up);
2559 }
2560
2561 return ret;
2562}
2563
2564static void serial8250_config_port(struct uart_port *port, int flags)
2565{
2566 struct uart_8250_port *up = (struct uart_8250_port *)port;
2567 int probeflags = PROBE_ANY;
2568 int ret;
2569
2570 /*
Linus Torvalds1da177e2005-04-16 15:20:36 -07002571 * Find the region that we can probe for. This in turn
2572 * tells us whether we can probe for the type of port.
2573 */
2574 ret = serial8250_request_std_resource(up);
2575 if (ret < 0)
2576 return;
2577
2578 ret = serial8250_request_rsa_resource(up);
2579 if (ret < 0)
2580 probeflags &= ~PROBE_RSA;
2581
Alan Coxb8e7e402009-05-28 14:01:35 +01002582 if (up->port.iotype != up->cur_iotype)
2583 set_io_from_upio(port);
2584
Linus Torvalds1da177e2005-04-16 15:20:36 -07002585 if (flags & UART_CONFIG_TYPE)
2586 autoconfig(up, probeflags);
2587 if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ)
2588 autoconfig_irq(up);
2589
2590 if (up->port.type != PORT_RSA && probeflags & PROBE_RSA)
2591 serial8250_release_rsa_resource(up);
2592 if (up->port.type == PORT_UNKNOWN)
2593 serial8250_release_std_resource(up);
2594}
2595
2596static int
2597serial8250_verify_port(struct uart_port *port, struct serial_struct *ser)
2598{
Yinghai Lua62c4132008-08-19 20:49:55 -07002599 if (ser->irq >= nr_irqs || ser->irq < 0 ||
Linus Torvalds1da177e2005-04-16 15:20:36 -07002600 ser->baud_base < 9600 || ser->type < PORT_UNKNOWN ||
2601 ser->type >= ARRAY_SIZE(uart_config) || ser->type == PORT_CIRRUS ||
2602 ser->type == PORT_STARTECH)
2603 return -EINVAL;
2604 return 0;
2605}
2606
2607static const char *
2608serial8250_type(struct uart_port *port)
2609{
2610 int type = port->type;
2611
2612 if (type >= ARRAY_SIZE(uart_config))
2613 type = 0;
2614 return uart_config[type].name;
2615}
2616
2617static struct uart_ops serial8250_pops = {
2618 .tx_empty = serial8250_tx_empty,
2619 .set_mctrl = serial8250_set_mctrl,
2620 .get_mctrl = serial8250_get_mctrl,
2621 .stop_tx = serial8250_stop_tx,
2622 .start_tx = serial8250_start_tx,
2623 .stop_rx = serial8250_stop_rx,
2624 .enable_ms = serial8250_enable_ms,
2625 .break_ctl = serial8250_break_ctl,
2626 .startup = serial8250_startup,
2627 .shutdown = serial8250_shutdown,
2628 .set_termios = serial8250_set_termios,
2629 .pm = serial8250_pm,
2630 .type = serial8250_type,
2631 .release_port = serial8250_release_port,
2632 .request_port = serial8250_request_port,
2633 .config_port = serial8250_config_port,
2634 .verify_port = serial8250_verify_port,
Jason Wesself2d937f2008-04-17 20:05:37 +02002635#ifdef CONFIG_CONSOLE_POLL
2636 .poll_get_char = serial8250_get_poll_char,
2637 .poll_put_char = serial8250_put_poll_char,
2638#endif
Linus Torvalds1da177e2005-04-16 15:20:36 -07002639};
2640
2641static struct uart_8250_port serial8250_ports[UART_NR];
2642
2643static void __init serial8250_isa_init_ports(void)
2644{
2645 struct uart_8250_port *up;
2646 static int first = 1;
2647 int i;
2648
2649 if (!first)
2650 return;
2651 first = 0;
2652
Dave Jonesa61c2d72006-01-07 23:18:19 +00002653 for (i = 0; i < nr_uarts; i++) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002654 struct uart_8250_port *up = &serial8250_ports[i];
2655
2656 up->port.line = i;
2657 spin_lock_init(&up->port.lock);
2658
2659 init_timer(&up->timer);
2660 up->timer.function = serial8250_timeout;
2661
2662 /*
2663 * ALPHA_KLUDGE_MCR needs to be killed.
2664 */
2665 up->mcr_mask = ~ALPHA_KLUDGE_MCR;
2666 up->mcr_force = ALPHA_KLUDGE_MCR;
2667
2668 up->port.ops = &serial8250_pops;
2669 }
2670
Russell King44454bc2005-06-30 22:41:22 +01002671 for (i = 0, up = serial8250_ports;
Dave Jonesa61c2d72006-01-07 23:18:19 +00002672 i < ARRAY_SIZE(old_serial_port) && i < nr_uarts;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002673 i++, up++) {
2674 up->port.iobase = old_serial_port[i].port;
2675 up->port.irq = irq_canonicalize(old_serial_port[i].irq);
Vikram Pandita1c2f0492009-09-19 13:13:19 -07002676 up->port.irqflags = old_serial_port[i].irqflags;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002677 up->port.uartclk = old_serial_port[i].baud_base * 16;
2678 up->port.flags = old_serial_port[i].flags;
2679 up->port.hub6 = old_serial_port[i].hub6;
2680 up->port.membase = old_serial_port[i].iomem_base;
2681 up->port.iotype = old_serial_port[i].io_type;
2682 up->port.regshift = old_serial_port[i].iomem_reg_shift;
David Daney7d6a07d2009-01-02 13:49:47 +00002683 set_io_from_upio(&up->port);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002684 if (share_irqs)
Vikram Pandita1c2f0492009-09-19 13:13:19 -07002685 up->port.irqflags |= IRQF_SHARED;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002686 }
2687}
2688
2689static void __init
2690serial8250_register_ports(struct uart_driver *drv, struct device *dev)
2691{
2692 int i;
2693
Alan Coxb8e7e402009-05-28 14:01:35 +01002694 for (i = 0; i < nr_uarts; i++) {
2695 struct uart_8250_port *up = &serial8250_ports[i];
2696 up->cur_iotype = 0xFF;
2697 }
2698
Linus Torvalds1da177e2005-04-16 15:20:36 -07002699 serial8250_isa_init_ports();
2700
Dave Jonesa61c2d72006-01-07 23:18:19 +00002701 for (i = 0; i < nr_uarts; i++) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002702 struct uart_8250_port *up = &serial8250_ports[i];
2703
2704 up->port.dev = dev;
2705 uart_add_one_port(drv, &up->port);
2706 }
2707}
2708
2709#ifdef CONFIG_SERIAL_8250_CONSOLE
2710
Russell Kingd3587882006-03-20 20:00:09 +00002711static void serial8250_console_putchar(struct uart_port *port, int ch)
2712{
2713 struct uart_8250_port *up = (struct uart_8250_port *)port;
2714
2715 wait_for_xmitr(up, UART_LSR_THRE);
2716 serial_out(up, UART_TX, ch);
2717}
2718
Linus Torvalds1da177e2005-04-16 15:20:36 -07002719/*
2720 * Print a string to the serial port trying not to disturb
2721 * any possible real use of the port...
2722 *
2723 * The console_lock must be held when we get here.
2724 */
2725static void
2726serial8250_console_write(struct console *co, const char *s, unsigned int count)
2727{
2728 struct uart_8250_port *up = &serial8250_ports[co->index];
Russell Kingd8a5a8d2006-05-02 16:04:29 +01002729 unsigned long flags;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002730 unsigned int ier;
Russell Kingd8a5a8d2006-05-02 16:04:29 +01002731 int locked = 1;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002732
Andrew Morton78512ec2005-11-07 00:59:13 -08002733 touch_nmi_watchdog();
2734
Andrew Morton68aa2c02006-06-30 02:29:59 -07002735 local_irq_save(flags);
2736 if (up->port.sysrq) {
2737 /* serial8250_handle_port() already took the lock */
2738 locked = 0;
2739 } else if (oops_in_progress) {
2740 locked = spin_trylock(&up->port.lock);
Russell Kingd8a5a8d2006-05-02 16:04:29 +01002741 } else
Andrew Morton68aa2c02006-06-30 02:29:59 -07002742 spin_lock(&up->port.lock);
Russell Kingd8a5a8d2006-05-02 16:04:29 +01002743
Linus Torvalds1da177e2005-04-16 15:20:36 -07002744 /*
Ralf Baechledc7bf132006-02-15 09:59:47 +00002745 * First save the IER then disable the interrupts
Linus Torvalds1da177e2005-04-16 15:20:36 -07002746 */
2747 ier = serial_in(up, UART_IER);
2748
2749 if (up->capabilities & UART_CAP_UUE)
2750 serial_out(up, UART_IER, UART_IER_UUE);
2751 else
2752 serial_out(up, UART_IER, 0);
2753
Russell Kingd3587882006-03-20 20:00:09 +00002754 uart_console_write(&up->port, s, count, serial8250_console_putchar);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002755
2756 /*
2757 * Finally, wait for transmitter to become empty
2758 * and restore the IER
2759 */
Alan Coxf91a3712006-01-21 14:59:12 +00002760 wait_for_xmitr(up, BOTH_EMPTY);
Russell Kinga88d75b2006-04-30 11:30:15 +01002761 serial_out(up, UART_IER, ier);
Russell Kingd8a5a8d2006-05-02 16:04:29 +01002762
Corey Minyardad4c2aa2007-08-22 14:01:18 -07002763 /*
2764 * The receive handling will happen properly because the
2765 * receive ready bit will still be set; it is not cleared
2766 * on read. However, modem control will not, we must
2767 * call it if we have saved something in the saved flags
2768 * while processing with interrupts off.
2769 */
2770 if (up->msr_saved_flags)
2771 check_modem_status(up);
2772
Russell Kingd8a5a8d2006-05-02 16:04:29 +01002773 if (locked)
Andrew Morton68aa2c02006-06-30 02:29:59 -07002774 spin_unlock(&up->port.lock);
2775 local_irq_restore(flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002776}
2777
Vivek Goyal118c0ac2007-01-11 01:52:44 +01002778static int __init serial8250_console_setup(struct console *co, char *options)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002779{
2780 struct uart_port *port;
2781 int baud = 9600;
2782 int bits = 8;
2783 int parity = 'n';
2784 int flow = 'n';
2785
2786 /*
2787 * Check whether an invalid uart number has been specified, and
2788 * if so, search for the first available port that does have
2789 * console support.
2790 */
Dave Jonesa61c2d72006-01-07 23:18:19 +00002791 if (co->index >= nr_uarts)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002792 co->index = 0;
2793 port = &serial8250_ports[co->index].port;
2794 if (!port->iobase && !port->membase)
2795 return -ENODEV;
2796
2797 if (options)
2798 uart_parse_options(options, &baud, &parity, &bits, &flow);
2799
2800 return uart_set_options(port, co, baud, parity, bits, flow);
2801}
2802
Daniel Ritzb6b1d872007-08-03 16:07:43 +02002803static int serial8250_console_early_setup(void)
Yinghai Lu18a8bd92007-07-15 23:37:59 -07002804{
2805 return serial8250_find_port_for_earlycon();
2806}
2807
Linus Torvalds1da177e2005-04-16 15:20:36 -07002808static struct console serial8250_console = {
2809 .name = "ttyS",
2810 .write = serial8250_console_write,
2811 .device = uart_console_device,
2812 .setup = serial8250_console_setup,
Yinghai Lu18a8bd92007-07-15 23:37:59 -07002813 .early_setup = serial8250_console_early_setup,
Linus Torvalds1da177e2005-04-16 15:20:36 -07002814 .flags = CON_PRINTBUFFER,
2815 .index = -1,
2816 .data = &serial8250_reg,
2817};
2818
2819static int __init serial8250_console_init(void)
2820{
Eric W. Biederman05d81d22008-07-12 13:47:53 -07002821 if (nr_uarts > UART_NR)
2822 nr_uarts = UART_NR;
2823
Linus Torvalds1da177e2005-04-16 15:20:36 -07002824 serial8250_isa_init_ports();
2825 register_console(&serial8250_console);
2826 return 0;
2827}
2828console_initcall(serial8250_console_init);
2829
Yinghai Lu18a8bd92007-07-15 23:37:59 -07002830int serial8250_find_port(struct uart_port *p)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002831{
2832 int line;
2833 struct uart_port *port;
2834
Dave Jonesa61c2d72006-01-07 23:18:19 +00002835 for (line = 0; line < nr_uarts; line++) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002836 port = &serial8250_ports[line].port;
Russell King50aec3b52006-01-04 18:13:03 +00002837 if (uart_match_port(p, port))
Linus Torvalds1da177e2005-04-16 15:20:36 -07002838 return line;
2839 }
2840 return -ENODEV;
2841}
2842
Linus Torvalds1da177e2005-04-16 15:20:36 -07002843#define SERIAL8250_CONSOLE &serial8250_console
2844#else
2845#define SERIAL8250_CONSOLE NULL
2846#endif
2847
2848static struct uart_driver serial8250_reg = {
2849 .owner = THIS_MODULE,
2850 .driver_name = "serial",
Linus Torvalds1da177e2005-04-16 15:20:36 -07002851 .dev_name = "ttyS",
2852 .major = TTY_MAJOR,
2853 .minor = 64,
Linus Torvalds1da177e2005-04-16 15:20:36 -07002854 .cons = SERIAL8250_CONSOLE,
2855};
2856
Russell Kingd856c662006-02-23 10:22:13 +00002857/*
2858 * early_serial_setup - early registration for 8250 ports
2859 *
2860 * Setup an 8250 port structure prior to console initialisation. Use
2861 * after console initialisation will cause undefined behaviour.
2862 */
Linus Torvalds1da177e2005-04-16 15:20:36 -07002863int __init early_serial_setup(struct uart_port *port)
2864{
David Daneyb4304282009-01-02 13:49:41 +00002865 struct uart_port *p;
2866
Linus Torvalds1da177e2005-04-16 15:20:36 -07002867 if (port->line >= ARRAY_SIZE(serial8250_ports))
2868 return -ENODEV;
2869
2870 serial8250_isa_init_ports();
David Daneyb4304282009-01-02 13:49:41 +00002871 p = &serial8250_ports[port->line].port;
2872 p->iobase = port->iobase;
2873 p->membase = port->membase;
2874 p->irq = port->irq;
Vikram Pandita1c2f0492009-09-19 13:13:19 -07002875 p->irqflags = port->irqflags;
David Daneyb4304282009-01-02 13:49:41 +00002876 p->uartclk = port->uartclk;
2877 p->fifosize = port->fifosize;
2878 p->regshift = port->regshift;
2879 p->iotype = port->iotype;
2880 p->flags = port->flags;
2881 p->mapbase = port->mapbase;
2882 p->private_data = port->private_data;
Helge Deller125c97d2009-01-13 22:51:07 +01002883 p->type = port->type;
2884 p->line = port->line;
David Daney7d6a07d2009-01-02 13:49:47 +00002885
2886 set_io_from_upio(p);
2887 if (port->serial_in)
2888 p->serial_in = port->serial_in;
2889 if (port->serial_out)
2890 p->serial_out = port->serial_out;
2891
Linus Torvalds1da177e2005-04-16 15:20:36 -07002892 return 0;
2893}
2894
2895/**
2896 * serial8250_suspend_port - suspend one serial port
2897 * @line: serial line number
Linus Torvalds1da177e2005-04-16 15:20:36 -07002898 *
2899 * Suspend one serial port.
2900 */
2901void serial8250_suspend_port(int line)
2902{
2903 uart_suspend_port(&serial8250_reg, &serial8250_ports[line].port);
2904}
2905
2906/**
2907 * serial8250_resume_port - resume one serial port
2908 * @line: serial line number
Linus Torvalds1da177e2005-04-16 15:20:36 -07002909 *
2910 * Resume one serial port.
2911 */
2912void serial8250_resume_port(int line)
2913{
David Woodhouseb5b82df2007-05-17 14:27:39 +08002914 struct uart_8250_port *up = &serial8250_ports[line];
2915
2916 if (up->capabilities & UART_NATSEMI) {
2917 unsigned char tmp;
2918
2919 /* Ensure it's still in high speed mode */
2920 serial_outp(up, UART_LCR, 0xE0);
2921
2922 tmp = serial_in(up, 0x04); /* EXCR2 */
2923 tmp &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */
2924 tmp |= 0x10; /* 1.625 divisor for baud_base --> 921600 */
2925 serial_outp(up, 0x04, tmp);
2926
2927 serial_outp(up, UART_LCR, 0);
2928 }
2929 uart_resume_port(&serial8250_reg, &up->port);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002930}
2931
2932/*
2933 * Register a set of serial devices attached to a platform device. The
2934 * list is terminated with a zero flags entry, which means we expect
2935 * all entries to have at least UPF_BOOT_AUTOCONF set.
2936 */
Russell King3ae5eae2005-11-09 22:32:44 +00002937static int __devinit serial8250_probe(struct platform_device *dev)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002938{
Russell King3ae5eae2005-11-09 22:32:44 +00002939 struct plat_serial8250_port *p = dev->dev.platform_data;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002940 struct uart_port port;
Russell Kingec9f47c2005-06-27 11:12:54 +01002941 int ret, i;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002942
2943 memset(&port, 0, sizeof(struct uart_port));
2944
Russell Kingec9f47c2005-06-27 11:12:54 +01002945 for (i = 0; p && p->flags != 0; p++, i++) {
Will Newton74a197412008-02-04 22:27:50 -08002946 port.iobase = p->iobase;
2947 port.membase = p->membase;
2948 port.irq = p->irq;
Vikram Pandita1c2f0492009-09-19 13:13:19 -07002949 port.irqflags = p->irqflags;
Will Newton74a197412008-02-04 22:27:50 -08002950 port.uartclk = p->uartclk;
2951 port.regshift = p->regshift;
2952 port.iotype = p->iotype;
2953 port.flags = p->flags;
2954 port.mapbase = p->mapbase;
2955 port.hub6 = p->hub6;
2956 port.private_data = p->private_data;
David Daney8e23fcc2009-01-02 13:49:54 +00002957 port.type = p->type;
David Daney7d6a07d2009-01-02 13:49:47 +00002958 port.serial_in = p->serial_in;
2959 port.serial_out = p->serial_out;
Will Newton74a197412008-02-04 22:27:50 -08002960 port.dev = &dev->dev;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002961 if (share_irqs)
Vikram Pandita1c2f0492009-09-19 13:13:19 -07002962 port.irqflags |= IRQF_SHARED;
Russell Kingec9f47c2005-06-27 11:12:54 +01002963 ret = serial8250_register_port(&port);
2964 if (ret < 0) {
Russell King3ae5eae2005-11-09 22:32:44 +00002965 dev_err(&dev->dev, "unable to register port at index %d "
Josh Boyer4f640ef2007-07-23 18:43:44 -07002966 "(IO%lx MEM%llx IRQ%d): %d\n", i,
2967 p->iobase, (unsigned long long)p->mapbase,
2968 p->irq, ret);
Russell Kingec9f47c2005-06-27 11:12:54 +01002969 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07002970 }
2971 return 0;
2972}
2973
2974/*
2975 * Remove serial ports registered against a platform device.
2976 */
Russell King3ae5eae2005-11-09 22:32:44 +00002977static int __devexit serial8250_remove(struct platform_device *dev)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002978{
2979 int i;
2980
Dave Jonesa61c2d72006-01-07 23:18:19 +00002981 for (i = 0; i < nr_uarts; i++) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002982 struct uart_8250_port *up = &serial8250_ports[i];
2983
Russell King3ae5eae2005-11-09 22:32:44 +00002984 if (up->port.dev == &dev->dev)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002985 serial8250_unregister_port(i);
2986 }
2987 return 0;
2988}
2989
Russell King3ae5eae2005-11-09 22:32:44 +00002990static int serial8250_suspend(struct platform_device *dev, pm_message_t state)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002991{
2992 int i;
2993
Linus Torvalds1da177e2005-04-16 15:20:36 -07002994 for (i = 0; i < UART_NR; i++) {
2995 struct uart_8250_port *up = &serial8250_ports[i];
2996
Russell King3ae5eae2005-11-09 22:32:44 +00002997 if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002998 uart_suspend_port(&serial8250_reg, &up->port);
2999 }
3000
3001 return 0;
3002}
3003
Russell King3ae5eae2005-11-09 22:32:44 +00003004static int serial8250_resume(struct platform_device *dev)
Linus Torvalds1da177e2005-04-16 15:20:36 -07003005{
3006 int i;
3007
Linus Torvalds1da177e2005-04-16 15:20:36 -07003008 for (i = 0; i < UART_NR; i++) {
3009 struct uart_8250_port *up = &serial8250_ports[i];
3010
Russell King3ae5eae2005-11-09 22:32:44 +00003011 if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev)
David Woodhouseb5b82df2007-05-17 14:27:39 +08003012 serial8250_resume_port(i);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003013 }
3014
3015 return 0;
3016}
3017
Russell King3ae5eae2005-11-09 22:32:44 +00003018static struct platform_driver serial8250_isa_driver = {
Linus Torvalds1da177e2005-04-16 15:20:36 -07003019 .probe = serial8250_probe,
3020 .remove = __devexit_p(serial8250_remove),
3021 .suspend = serial8250_suspend,
3022 .resume = serial8250_resume,
Russell King3ae5eae2005-11-09 22:32:44 +00003023 .driver = {
3024 .name = "serial8250",
Dmitry Torokhov7493a312006-01-13 22:06:43 +00003025 .owner = THIS_MODULE,
Russell King3ae5eae2005-11-09 22:32:44 +00003026 },
Linus Torvalds1da177e2005-04-16 15:20:36 -07003027};
3028
3029/*
3030 * This "device" covers _all_ ISA 8250-compatible serial devices listed
3031 * in the table in include/asm/serial.h
3032 */
3033static struct platform_device *serial8250_isa_devs;
3034
3035/*
3036 * serial8250_register_port and serial8250_unregister_port allows for
3037 * 16x50 serial ports to be configured at run-time, to support PCMCIA
3038 * modems and PCI multiport cards.
3039 */
Arjan van de Venf392ecf2006-01-12 18:44:32 +00003040static DEFINE_MUTEX(serial_mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003041
3042static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port *port)
3043{
3044 int i;
3045
3046 /*
3047 * First, find a port entry which matches.
3048 */
Dave Jonesa61c2d72006-01-07 23:18:19 +00003049 for (i = 0; i < nr_uarts; i++)
Linus Torvalds1da177e2005-04-16 15:20:36 -07003050 if (uart_match_port(&serial8250_ports[i].port, port))
3051 return &serial8250_ports[i];
3052
3053 /*
3054 * We didn't find a matching entry, so look for the first
3055 * free entry. We look for one which hasn't been previously
3056 * used (indicated by zero iobase).
3057 */
Dave Jonesa61c2d72006-01-07 23:18:19 +00003058 for (i = 0; i < nr_uarts; i++)
Linus Torvalds1da177e2005-04-16 15:20:36 -07003059 if (serial8250_ports[i].port.type == PORT_UNKNOWN &&
3060 serial8250_ports[i].port.iobase == 0)
3061 return &serial8250_ports[i];
3062
3063 /*
3064 * That also failed. Last resort is to find any entry which
3065 * doesn't have a real port associated with it.
3066 */
Dave Jonesa61c2d72006-01-07 23:18:19 +00003067 for (i = 0; i < nr_uarts; i++)
Linus Torvalds1da177e2005-04-16 15:20:36 -07003068 if (serial8250_ports[i].port.type == PORT_UNKNOWN)
3069 return &serial8250_ports[i];
3070
3071 return NULL;
3072}
3073
3074/**
3075 * serial8250_register_port - register a serial port
3076 * @port: serial port template
3077 *
3078 * Configure the serial port specified by the request. If the
3079 * port exists and is in use, it is hung up and unregistered
3080 * first.
3081 *
3082 * The port is then probed and if necessary the IRQ is autodetected
3083 * If this fails an error is returned.
3084 *
3085 * On success the port is ready to use and the line number is returned.
3086 */
3087int serial8250_register_port(struct uart_port *port)
3088{
3089 struct uart_8250_port *uart;
3090 int ret = -ENOSPC;
3091
3092 if (port->uartclk == 0)
3093 return -EINVAL;
3094
Arjan van de Venf392ecf2006-01-12 18:44:32 +00003095 mutex_lock(&serial_mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003096
3097 uart = serial8250_find_match_or_unused(port);
3098 if (uart) {
3099 uart_remove_one_port(&serial8250_reg, &uart->port);
3100
Will Newton74a197412008-02-04 22:27:50 -08003101 uart->port.iobase = port->iobase;
3102 uart->port.membase = port->membase;
3103 uart->port.irq = port->irq;
Vikram Pandita1c2f0492009-09-19 13:13:19 -07003104 uart->port.irqflags = port->irqflags;
Will Newton74a197412008-02-04 22:27:50 -08003105 uart->port.uartclk = port->uartclk;
3106 uart->port.fifosize = port->fifosize;
3107 uart->port.regshift = port->regshift;
3108 uart->port.iotype = port->iotype;
3109 uart->port.flags = port->flags | UPF_BOOT_AUTOCONF;
3110 uart->port.mapbase = port->mapbase;
3111 uart->port.private_data = port->private_data;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003112 if (port->dev)
3113 uart->port.dev = port->dev;
David Daney8e23fcc2009-01-02 13:49:54 +00003114
3115 if (port->flags & UPF_FIXED_TYPE) {
3116 uart->port.type = port->type;
3117 uart->port.fifosize = uart_config[port->type].fifo_size;
3118 uart->capabilities = uart_config[port->type].flags;
3119 uart->tx_loadsz = uart_config[port->type].tx_loadsz;
3120 }
3121
David Daney7d6a07d2009-01-02 13:49:47 +00003122 set_io_from_upio(&uart->port);
3123 /* Possibly override default I/O functions. */
3124 if (port->serial_in)
3125 uart->port.serial_in = port->serial_in;
3126 if (port->serial_out)
3127 uart->port.serial_out = port->serial_out;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003128
3129 ret = uart_add_one_port(&serial8250_reg, &uart->port);
3130 if (ret == 0)
3131 ret = uart->port.line;
3132 }
Arjan van de Venf392ecf2006-01-12 18:44:32 +00003133 mutex_unlock(&serial_mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003134
3135 return ret;
3136}
3137EXPORT_SYMBOL(serial8250_register_port);
3138
3139/**
3140 * serial8250_unregister_port - remove a 16x50 serial port at runtime
3141 * @line: serial line number
3142 *
3143 * Remove one serial port. This may not be called from interrupt
3144 * context. We hand the port back to the our control.
3145 */
3146void serial8250_unregister_port(int line)
3147{
3148 struct uart_8250_port *uart = &serial8250_ports[line];
3149
Arjan van de Venf392ecf2006-01-12 18:44:32 +00003150 mutex_lock(&serial_mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003151 uart_remove_one_port(&serial8250_reg, &uart->port);
3152 if (serial8250_isa_devs) {
3153 uart->port.flags &= ~UPF_BOOT_AUTOCONF;
3154 uart->port.type = PORT_UNKNOWN;
3155 uart->port.dev = &serial8250_isa_devs->dev;
3156 uart_add_one_port(&serial8250_reg, &uart->port);
3157 } else {
3158 uart->port.dev = NULL;
3159 }
Arjan van de Venf392ecf2006-01-12 18:44:32 +00003160 mutex_unlock(&serial_mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003161}
3162EXPORT_SYMBOL(serial8250_unregister_port);
3163
3164static int __init serial8250_init(void)
3165{
Alan Cox25db8ad2008-08-19 20:49:40 -07003166 int ret;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003167
Dave Jonesa61c2d72006-01-07 23:18:19 +00003168 if (nr_uarts > UART_NR)
3169 nr_uarts = UART_NR;
3170
Paul Bollef1fb9bb2008-12-30 14:06:43 +01003171 printk(KERN_INFO "Serial: 8250/16550 driver, "
Dave Jonesa61c2d72006-01-07 23:18:19 +00003172 "%d ports, IRQ sharing %sabled\n", nr_uarts,
Linus Torvalds1da177e2005-04-16 15:20:36 -07003173 share_irqs ? "en" : "dis");
3174
David Millerb70ac772008-10-13 10:36:31 +01003175#ifdef CONFIG_SPARC
3176 ret = sunserial_register_minors(&serial8250_reg, UART_NR);
3177#else
3178 serial8250_reg.nr = UART_NR;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003179 ret = uart_register_driver(&serial8250_reg);
David Millerb70ac772008-10-13 10:36:31 +01003180#endif
Linus Torvalds1da177e2005-04-16 15:20:36 -07003181 if (ret)
3182 goto out;
3183
Dmitry Torokhov7493a312006-01-13 22:06:43 +00003184 serial8250_isa_devs = platform_device_alloc("serial8250",
3185 PLAT8250_DEV_LEGACY);
3186 if (!serial8250_isa_devs) {
3187 ret = -ENOMEM;
Russell Kingbc965a72006-01-18 09:54:29 +00003188 goto unreg_uart_drv;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003189 }
3190
Dmitry Torokhov7493a312006-01-13 22:06:43 +00003191 ret = platform_device_add(serial8250_isa_devs);
3192 if (ret)
3193 goto put_dev;
3194
Linus Torvalds1da177e2005-04-16 15:20:36 -07003195 serial8250_register_ports(&serial8250_reg, &serial8250_isa_devs->dev);
3196
Russell Kingbc965a72006-01-18 09:54:29 +00003197 ret = platform_driver_register(&serial8250_isa_driver);
3198 if (ret == 0)
3199 goto out;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003200
Russell Kingbc965a72006-01-18 09:54:29 +00003201 platform_device_del(serial8250_isa_devs);
Alan Cox25db8ad2008-08-19 20:49:40 -07003202put_dev:
Dmitry Torokhov7493a312006-01-13 22:06:43 +00003203 platform_device_put(serial8250_isa_devs);
Alan Cox25db8ad2008-08-19 20:49:40 -07003204unreg_uart_drv:
David Millerb70ac772008-10-13 10:36:31 +01003205#ifdef CONFIG_SPARC
3206 sunserial_unregister_minors(&serial8250_reg, UART_NR);
3207#else
Linus Torvalds1da177e2005-04-16 15:20:36 -07003208 uart_unregister_driver(&serial8250_reg);
David Millerb70ac772008-10-13 10:36:31 +01003209#endif
Alan Cox25db8ad2008-08-19 20:49:40 -07003210out:
Linus Torvalds1da177e2005-04-16 15:20:36 -07003211 return ret;
3212}
3213
3214static void __exit serial8250_exit(void)
3215{
3216 struct platform_device *isa_dev = serial8250_isa_devs;
3217
3218 /*
3219 * This tells serial8250_unregister_port() not to re-register
3220 * the ports (thereby making serial8250_isa_driver permanently
3221 * in use.)
3222 */
3223 serial8250_isa_devs = NULL;
3224
Russell King3ae5eae2005-11-09 22:32:44 +00003225 platform_driver_unregister(&serial8250_isa_driver);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003226 platform_device_unregister(isa_dev);
3227
David Millerb70ac772008-10-13 10:36:31 +01003228#ifdef CONFIG_SPARC
3229 sunserial_unregister_minors(&serial8250_reg, UART_NR);
3230#else
Linus Torvalds1da177e2005-04-16 15:20:36 -07003231 uart_unregister_driver(&serial8250_reg);
David Millerb70ac772008-10-13 10:36:31 +01003232#endif
Linus Torvalds1da177e2005-04-16 15:20:36 -07003233}
3234
3235module_init(serial8250_init);
3236module_exit(serial8250_exit);
3237
3238EXPORT_SYMBOL(serial8250_suspend_port);
3239EXPORT_SYMBOL(serial8250_resume_port);
3240
3241MODULE_LICENSE("GPL");
Adrian Bunkd87a6d92008-07-16 21:53:31 +01003242MODULE_DESCRIPTION("Generic 8250/16x50 serial driver");
Linus Torvalds1da177e2005-04-16 15:20:36 -07003243
3244module_param(share_irqs, uint, 0644);
3245MODULE_PARM_DESC(share_irqs, "Share IRQs with other non-8250/16x50 devices"
3246 " (unsafe)");
3247
Dave Jonesa61c2d72006-01-07 23:18:19 +00003248module_param(nr_uarts, uint, 0644);
3249MODULE_PARM_DESC(nr_uarts, "Maximum number of UARTs supported. (1-" __MODULE_STRING(CONFIG_SERIAL_8250_NR_UARTS) ")");
3250
Linus Torvalds1da177e2005-04-16 15:20:36 -07003251#ifdef CONFIG_SERIAL_8250_RSA
3252module_param_array(probe_rsa, ulong, &probe_rsa_count, 0444);
3253MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA");
3254#endif
3255MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR);