Pete Popov | bdf21b1 | 2005-07-14 17:47:57 +0000 | [diff] [blame^] | 1 | /* |
| 2 | * |
| 3 | * BRIEF MODULE DESCRIPTION |
| 4 | * PNX8550 global definitions |
| 5 | * |
| 6 | * Author: source@mvista.com |
| 7 | * |
| 8 | * This program is free software; you can distribute it and/or modify it |
| 9 | * under the terms of the GNU General Public License (Version 2) as |
| 10 | * published by the Free Software Foundation. |
| 11 | * |
| 12 | * This program is distributed in the hope it will be useful, but WITHOUT |
| 13 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| 14 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| 15 | * for more details. |
| 16 | * |
| 17 | * You should have received a copy of the GNU General Public License along |
| 18 | * with this program; if not, write to the Free Software Foundation, Inc., |
| 19 | * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. |
| 20 | */ |
| 21 | |
| 22 | #ifndef __PNX8550_GLB_H |
| 23 | #define __PNX8550_GLB_H |
| 24 | |
| 25 | #define PNX8550_GLB1_BASE 0xBBE63000 |
| 26 | #define PNX8550_GLB2_BASE 0xBBE4d000 |
| 27 | #define PNX8550_RESET_BASE 0xBBE60000 |
| 28 | |
| 29 | /* PCI Inta Output Enable Registers */ |
| 30 | #define PNX8550_GLB2_ENAB_INTA_O *(volatile unsigned long *)(PNX8550_GLB2_BASE + 0x050) |
| 31 | |
| 32 | /* Bit 1:Enable DAC Powerdown |
| 33 | 0:DACs are enabled and are working normally |
| 34 | 1:DACs are powerdown |
| 35 | */ |
| 36 | #define PNX8550_GLB_DAC_PD 0x2 |
| 37 | /* Bit 0:Enable of PCI inta output |
| 38 | 0 = Disable PCI inta output |
| 39 | 1 = Enable PCI inta output |
| 40 | */ |
| 41 | #define PNX8550_GLB_ENABLE_INTA_O 0x1 |
| 42 | |
| 43 | /* PCI Direct Mappings */ |
| 44 | #define PNX8550_PCIMEM 0x12000000 |
| 45 | #define PNX8550_PCIMEM_SIZE 0x08000000 |
| 46 | #define PNX8550_PCIIO 0x1c000000 |
| 47 | #define PNX8550_PCIIO_SIZE 0x02000000 /* 32M */ |
| 48 | |
| 49 | #define PNX8550_PORT_BASE KSEG1 |
| 50 | |
| 51 | // GPIO def |
| 52 | #define PNX8550_GPIO_BASE 0x1Be00000 |
| 53 | |
| 54 | #define PNX8550_GPIO_DIRQ0 (PNX8550_GPIO_BASE + 0x104500) |
| 55 | #define PNX8550_GPIO_MC1 (PNX8550_GPIO_BASE + 0x104004) |
| 56 | #define PNX8550_GPIO_MC_31_BIT 30 |
| 57 | #define PNX8550_GPIO_MC_30_BIT 28 |
| 58 | #define PNX8550_GPIO_MC_29_BIT 26 |
| 59 | #define PNX8550_GPIO_MC_28_BIT 24 |
| 60 | #define PNX8550_GPIO_MC_27_BIT 22 |
| 61 | #define PNX8550_GPIO_MC_26_BIT 20 |
| 62 | #define PNX8550_GPIO_MC_25_BIT 18 |
| 63 | #define PNX8550_GPIO_MC_24_BIT 16 |
| 64 | #define PNX8550_GPIO_MC_23_BIT 14 |
| 65 | #define PNX8550_GPIO_MC_22_BIT 12 |
| 66 | #define PNX8550_GPIO_MC_21_BIT 10 |
| 67 | #define PNX8550_GPIO_MC_20_BIT 8 |
| 68 | #define PNX8550_GPIO_MC_19_BIT 6 |
| 69 | #define PNX8550_GPIO_MC_18_BIT 4 |
| 70 | #define PNX8550_GPIO_MC_17_BIT 2 |
| 71 | #define PNX8550_GPIO_MC_16_BIT 0 |
| 72 | |
| 73 | #define PNX8550_GPIO_MODE_PRIMOP 0x1 |
| 74 | #define PNX8550_GPIO_MODE_NO_OPENDR 0x2 |
| 75 | #define PNX8550_GPIO_MODE_OPENDR 0x3 |
| 76 | |
| 77 | // RESET module |
| 78 | #define PNX8550_RST_CTL *(volatile unsigned long *)(PNX8550_RESET_BASE + 0x0) |
| 79 | #define PNX8550_RST_CAUSE *(volatile unsigned long *)(PNX8550_RESET_BASE + 0x4) |
| 80 | #define PNX8550_RST_EN_WATCHDOG *(volatile unsigned long *)(PNX8550_RESET_BASE + 0x8) |
| 81 | |
| 82 | #define PNX8550_RST_REL_MIPS_RST_N 0x8 |
| 83 | #define PNX8550_RST_DO_SW_RST 0x4 |
| 84 | #define PNX8550_RST_REL_SYS_RST_OUT 0x2 |
| 85 | #define PNX8550_RST_ASSERT_SYS_RST_OUT 0x1 |
| 86 | #endif |