blob: e7cc363972173ca0177de6bfb7ce3f38de89bde2 [file] [log] [blame]
Huang Yingea8c0712010-05-18 14:35:15 +08001 APEI Error INJection
2 ~~~~~~~~~~~~~~~~~~~~
3
4EINJ provides a hardware error injection mechanism
5It is very useful for debugging and testing of other APEI and RAS features.
6
7To use EINJ, make sure the following are enabled in your kernel
8configuration:
9
10CONFIG_DEBUG_FS
11CONFIG_ACPI_APEI
12CONFIG_ACPI_APEI_EINJ
13
14The user interface of EINJ is debug file system, under the
15directory apei/einj. The following files are provided.
16
17- available_error_type
18 Reading this file returns the error injection capability of the
19 platform, that is, which error types are supported. The error type
20 definition is as follow, the left field is the error type value, the
21 right field is error description.
22
23 0x00000001 Processor Correctable
24 0x00000002 Processor Uncorrectable non-fatal
25 0x00000004 Processor Uncorrectable fatal
26 0x00000008 Memory Correctable
27 0x00000010 Memory Uncorrectable non-fatal
28 0x00000020 Memory Uncorrectable fatal
29 0x00000040 PCI Express Correctable
30 0x00000080 PCI Express Uncorrectable fatal
31 0x00000100 PCI Express Uncorrectable non-fatal
32 0x00000200 Platform Correctable
33 0x00000400 Platform Uncorrectable non-fatal
34 0x00000800 Platform Uncorrectable fatal
35
36 The format of file contents are as above, except there are only the
37 available error type lines.
38
39- error_type
40 This file is used to set the error type value. The error type value
41 is defined in "available_error_type" description.
42
43- error_inject
44 Write any integer to this file to trigger the error
45 injection. Before this, please specify all necessary error
46 parameters.
47
Huang Ying6e320ec2010-05-18 14:35:24 +080048- param1
49 This file is used to set the first error parameter value. Effect of
Tony Luckc130bd62012-01-17 12:10:16 -080050 parameter depends on error_type specified.
Huang Ying6e320ec2010-05-18 14:35:24 +080051
52- param2
53 This file is used to set the second error parameter value. Effect of
Tony Luckc130bd62012-01-17 12:10:16 -080054 parameter depends on error_type specified.
Huang Yingc3e60882011-07-20 16:09:29 +080055
Tony Luckc130bd62012-01-17 12:10:16 -080056BIOS versions based in the ACPI 4.0 specification have limited options
57to control where the errors are injected. Your BIOS may support an
58extension (enabled with the param_extension=1 module parameter, or
59boot command line einj.param_extension=1). This allows the address
60and mask for memory injections to be specified by the param1 and
61param2 files in apei/einj.
62
63BIOS versions using the ACPI 5.0 specification have more control over
64the target of the injection. For processor related errors (type 0x1,
650x2 and 0x4) the APICID of the target should be provided using the
66param1 file in apei/einj. For memory errors (type 0x8, 0x10 and 0x20)
67the address is set using param1 with a mask in param2 (0x0 is equivalent
68to all ones). For PCI express errors (type 0x40, 0x80 and 0x100) the
69segment, bus, device and function are specified using param1:
70
71 31 24 23 16 15 11 10 8 7 0
72 +-------------------------------------------------+
73 | segment | bus | device | function | reserved |
74 +-------------------------------------------------+
75
76An ACPI 5.0 BIOS may also allow vendor specific errors to be injected.
77In this case a file named vendor will contain identifying information
78from the BIOS that hopefully will allow an application wishing to use
79the vendor specific extension to tell that they are running on a BIOS
80that supports it. All vendor extensions have the 0x80000000 bit set in
81error_type. A file vendor_flags controls the interpretation of param1
82and param2 (1 = PROCESSOR, 2 = MEMORY, 4 = PCI). See your BIOS vendor
83documentation for details (and expect changes to this API if vendors
84creativity in using this feature expands beyond our expectations).
85
86Example:
87# cd /sys/kernel/debug/apei/einj
88# cat available_error_type # See which errors can be injected
890x00000002 Processor Uncorrectable non-fatal
900x00000008 Memory Correctable
910x00000010 Memory Uncorrectable non-fatal
92# echo 0x12345000 > param1 # Set memory address for injection
93# echo 0xfffffffffffff000 > param2 # Mask - anywhere in this page
94# echo 0x8 > error_type # Choose correctable memory error
95# echo 1 > error_inject # Inject now
96
Huang Ying6e320ec2010-05-18 14:35:24 +080097
Huang Yingea8c0712010-05-18 14:35:15 +080098For more information about EINJ, please refer to ACPI specification
Tony Luckc130bd62012-01-17 12:10:16 -080099version 4.0, section 17.5 and ACPI 5.0, section 18.6.