Bo Shen | 32b16d4 | 2013-12-13 14:41:49 +0800 | [diff] [blame] | 1 | /* |
| 2 | * Driver for Atmel Pulse Width Modulation Controller |
| 3 | * |
| 4 | * Copyright (C) 2013 Atmel Corporation |
| 5 | * Bo Shen <voice.shen@atmel.com> |
| 6 | * |
| 7 | * Licensed under GPLv2. |
| 8 | */ |
| 9 | |
| 10 | #include <linux/clk.h> |
Alexandre Belloni | 472ac3d | 2015-05-25 18:11:49 +0200 | [diff] [blame] | 11 | #include <linux/delay.h> |
Bo Shen | 32b16d4 | 2013-12-13 14:41:49 +0800 | [diff] [blame] | 12 | #include <linux/err.h> |
| 13 | #include <linux/io.h> |
| 14 | #include <linux/module.h> |
Alexandre Belloni | 472ac3d | 2015-05-25 18:11:49 +0200 | [diff] [blame] | 15 | #include <linux/mutex.h> |
Bo Shen | 32b16d4 | 2013-12-13 14:41:49 +0800 | [diff] [blame] | 16 | #include <linux/of.h> |
| 17 | #include <linux/of_device.h> |
| 18 | #include <linux/platform_device.h> |
| 19 | #include <linux/pwm.h> |
| 20 | #include <linux/slab.h> |
| 21 | |
| 22 | /* The following is global registers for PWM controller */ |
| 23 | #define PWM_ENA 0x04 |
| 24 | #define PWM_DIS 0x08 |
| 25 | #define PWM_SR 0x0C |
Alexandre Belloni | 472ac3d | 2015-05-25 18:11:49 +0200 | [diff] [blame] | 26 | #define PWM_ISR 0x1C |
Bo Shen | 32b16d4 | 2013-12-13 14:41:49 +0800 | [diff] [blame] | 27 | /* Bit field in SR */ |
| 28 | #define PWM_SR_ALL_CH_ON 0x0F |
| 29 | |
| 30 | /* The following register is PWM channel related registers */ |
| 31 | #define PWM_CH_REG_OFFSET 0x200 |
| 32 | #define PWM_CH_REG_SIZE 0x20 |
| 33 | |
| 34 | #define PWM_CMR 0x0 |
| 35 | /* Bit field in CMR */ |
| 36 | #define PWM_CMR_CPOL (1 << 9) |
| 37 | #define PWM_CMR_UPD_CDTY (1 << 10) |
Alexandre Belloni | 8db9e29 | 2014-03-14 15:19:08 +0100 | [diff] [blame] | 38 | #define PWM_CMR_CPRE_MSK 0xF |
Bo Shen | 32b16d4 | 2013-12-13 14:41:49 +0800 | [diff] [blame] | 39 | |
| 40 | /* The following registers for PWM v1 */ |
| 41 | #define PWMV1_CDTY 0x04 |
| 42 | #define PWMV1_CPRD 0x08 |
| 43 | #define PWMV1_CUPD 0x10 |
| 44 | |
| 45 | /* The following registers for PWM v2 */ |
| 46 | #define PWMV2_CDTY 0x04 |
| 47 | #define PWMV2_CDTYUPD 0x08 |
| 48 | #define PWMV2_CPRD 0x0C |
| 49 | #define PWMV2_CPRDUPD 0x10 |
| 50 | |
| 51 | /* |
| 52 | * Max value for duty and period |
| 53 | * |
| 54 | * Although the duty and period register is 32 bit, |
| 55 | * however only the LSB 16 bits are significant. |
| 56 | */ |
| 57 | #define PWM_MAX_DTY 0xFFFF |
| 58 | #define PWM_MAX_PRD 0xFFFF |
| 59 | #define PRD_MAX_PRES 10 |
| 60 | |
| 61 | struct atmel_pwm_chip { |
| 62 | struct pwm_chip chip; |
| 63 | struct clk *clk; |
| 64 | void __iomem *base; |
| 65 | |
Alexandre Belloni | 472ac3d | 2015-05-25 18:11:49 +0200 | [diff] [blame] | 66 | unsigned int updated_pwms; |
| 67 | struct mutex isr_lock; /* ISR is cleared when read, ensure only one thread does that */ |
| 68 | |
Bo Shen | 32b16d4 | 2013-12-13 14:41:49 +0800 | [diff] [blame] | 69 | void (*config)(struct pwm_chip *chip, struct pwm_device *pwm, |
| 70 | unsigned long dty, unsigned long prd); |
| 71 | }; |
| 72 | |
| 73 | static inline struct atmel_pwm_chip *to_atmel_pwm_chip(struct pwm_chip *chip) |
| 74 | { |
| 75 | return container_of(chip, struct atmel_pwm_chip, chip); |
| 76 | } |
| 77 | |
| 78 | static inline u32 atmel_pwm_readl(struct atmel_pwm_chip *chip, |
| 79 | unsigned long offset) |
| 80 | { |
| 81 | return readl_relaxed(chip->base + offset); |
| 82 | } |
| 83 | |
| 84 | static inline void atmel_pwm_writel(struct atmel_pwm_chip *chip, |
| 85 | unsigned long offset, unsigned long val) |
| 86 | { |
| 87 | writel_relaxed(val, chip->base + offset); |
| 88 | } |
| 89 | |
| 90 | static inline u32 atmel_pwm_ch_readl(struct atmel_pwm_chip *chip, |
| 91 | unsigned int ch, unsigned long offset) |
| 92 | { |
| 93 | unsigned long base = PWM_CH_REG_OFFSET + ch * PWM_CH_REG_SIZE; |
| 94 | |
| 95 | return readl_relaxed(chip->base + base + offset); |
| 96 | } |
| 97 | |
| 98 | static inline void atmel_pwm_ch_writel(struct atmel_pwm_chip *chip, |
| 99 | unsigned int ch, unsigned long offset, |
| 100 | unsigned long val) |
| 101 | { |
| 102 | unsigned long base = PWM_CH_REG_OFFSET + ch * PWM_CH_REG_SIZE; |
| 103 | |
| 104 | writel_relaxed(val, chip->base + base + offset); |
| 105 | } |
| 106 | |
| 107 | static int atmel_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, |
| 108 | int duty_ns, int period_ns) |
| 109 | { |
| 110 | struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip); |
Nikolaus Voss | e2e0897 | 2014-09-23 15:30:21 +0200 | [diff] [blame] | 111 | unsigned long prd, dty; |
Bo Shen | 32b16d4 | 2013-12-13 14:41:49 +0800 | [diff] [blame] | 112 | unsigned long long div; |
| 113 | unsigned int pres = 0; |
Alexandre Belloni | 8db9e29 | 2014-03-14 15:19:08 +0100 | [diff] [blame] | 114 | u32 val; |
Bo Shen | 32b16d4 | 2013-12-13 14:41:49 +0800 | [diff] [blame] | 115 | int ret; |
| 116 | |
Boris Brezillon | 15da7b5 | 2015-07-01 10:21:50 +0200 | [diff] [blame] | 117 | if (pwm_is_enabled(pwm) && (period_ns != pwm_get_period(pwm))) { |
Bo Shen | 32b16d4 | 2013-12-13 14:41:49 +0800 | [diff] [blame] | 118 | dev_err(chip->dev, "cannot change PWM period while enabled\n"); |
| 119 | return -EBUSY; |
| 120 | } |
| 121 | |
Nikolaus Voss | e2e0897 | 2014-09-23 15:30:21 +0200 | [diff] [blame] | 122 | /* Calculate the period cycles and prescale value */ |
| 123 | div = (unsigned long long)clk_get_rate(atmel_pwm->clk) * period_ns; |
| 124 | do_div(div, NSEC_PER_SEC); |
Bo Shen | 32b16d4 | 2013-12-13 14:41:49 +0800 | [diff] [blame] | 125 | |
Bo Shen | 32b16d4 | 2013-12-13 14:41:49 +0800 | [diff] [blame] | 126 | while (div > PWM_MAX_PRD) { |
Nikolaus Voss | e2e0897 | 2014-09-23 15:30:21 +0200 | [diff] [blame] | 127 | div >>= 1; |
| 128 | pres++; |
| 129 | } |
Bo Shen | 32b16d4 | 2013-12-13 14:41:49 +0800 | [diff] [blame] | 130 | |
Nikolaus Voss | e2e0897 | 2014-09-23 15:30:21 +0200 | [diff] [blame] | 131 | if (pres > PRD_MAX_PRES) { |
| 132 | dev_err(chip->dev, "pres exceeds the maximum value\n"); |
| 133 | return -EINVAL; |
Bo Shen | 32b16d4 | 2013-12-13 14:41:49 +0800 | [diff] [blame] | 134 | } |
| 135 | |
| 136 | /* Calculate the duty cycles */ |
| 137 | prd = div; |
| 138 | div *= duty_ns; |
| 139 | do_div(div, period_ns); |
Alexandre Belloni | 916030d | 2014-03-14 15:19:09 +0100 | [diff] [blame] | 140 | dty = prd - div; |
Bo Shen | 32b16d4 | 2013-12-13 14:41:49 +0800 | [diff] [blame] | 141 | |
| 142 | ret = clk_enable(atmel_pwm->clk); |
| 143 | if (ret) { |
| 144 | dev_err(chip->dev, "failed to enable PWM clock\n"); |
| 145 | return ret; |
| 146 | } |
| 147 | |
Alexandre Belloni | 8db9e29 | 2014-03-14 15:19:08 +0100 | [diff] [blame] | 148 | /* It is necessary to preserve CPOL, inside CMR */ |
| 149 | val = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, PWM_CMR); |
| 150 | val = (val & ~PWM_CMR_CPRE_MSK) | (pres & PWM_CMR_CPRE_MSK); |
| 151 | atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, val); |
Bo Shen | 32b16d4 | 2013-12-13 14:41:49 +0800 | [diff] [blame] | 152 | atmel_pwm->config(chip, pwm, dty, prd); |
Alexandre Belloni | 472ac3d | 2015-05-25 18:11:49 +0200 | [diff] [blame] | 153 | mutex_lock(&atmel_pwm->isr_lock); |
| 154 | atmel_pwm->updated_pwms |= atmel_pwm_readl(atmel_pwm, PWM_ISR); |
| 155 | atmel_pwm->updated_pwms &= ~(1 << pwm->hwpwm); |
| 156 | mutex_unlock(&atmel_pwm->isr_lock); |
Bo Shen | 32b16d4 | 2013-12-13 14:41:49 +0800 | [diff] [blame] | 157 | |
| 158 | clk_disable(atmel_pwm->clk); |
| 159 | return ret; |
| 160 | } |
| 161 | |
| 162 | static void atmel_pwm_config_v1(struct pwm_chip *chip, struct pwm_device *pwm, |
| 163 | unsigned long dty, unsigned long prd) |
| 164 | { |
| 165 | struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip); |
| 166 | unsigned int val; |
| 167 | |
Bo Shen | 32b16d4 | 2013-12-13 14:41:49 +0800 | [diff] [blame] | 168 | |
Alexandre Belloni | 4c027f7 | 2015-05-25 15:19:55 +0200 | [diff] [blame] | 169 | atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV1_CUPD, dty); |
| 170 | |
| 171 | val = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, PWM_CMR); |
| 172 | val &= ~PWM_CMR_UPD_CDTY; |
| 173 | atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, val); |
| 174 | |
| 175 | /* |
| 176 | * If the PWM channel is enabled, only update CDTY by using the update |
| 177 | * register, it needs to set bit 10 of CMR to 0 |
| 178 | */ |
Boris Brezillon | 5c31252 | 2015-07-01 10:21:47 +0200 | [diff] [blame] | 179 | if (pwm_is_enabled(pwm)) |
Alexandre Belloni | 4c027f7 | 2015-05-25 15:19:55 +0200 | [diff] [blame] | 180 | return; |
| 181 | /* |
| 182 | * If the PWM channel is disabled, write value to duty and period |
| 183 | * registers directly. |
| 184 | */ |
| 185 | atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV1_CDTY, dty); |
| 186 | atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV1_CPRD, prd); |
Bo Shen | 32b16d4 | 2013-12-13 14:41:49 +0800 | [diff] [blame] | 187 | } |
| 188 | |
| 189 | static void atmel_pwm_config_v2(struct pwm_chip *chip, struct pwm_device *pwm, |
| 190 | unsigned long dty, unsigned long prd) |
| 191 | { |
| 192 | struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip); |
| 193 | |
Boris Brezillon | 5c31252 | 2015-07-01 10:21:47 +0200 | [diff] [blame] | 194 | if (pwm_is_enabled(pwm)) { |
Bo Shen | 32b16d4 | 2013-12-13 14:41:49 +0800 | [diff] [blame] | 195 | /* |
| 196 | * If the PWM channel is enabled, using the duty update register |
| 197 | * to update the value. |
| 198 | */ |
| 199 | atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV2_CDTYUPD, dty); |
| 200 | } else { |
| 201 | /* |
| 202 | * If the PWM channel is disabled, write value to duty and |
| 203 | * period registers directly. |
| 204 | */ |
| 205 | atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV2_CDTY, dty); |
| 206 | atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV2_CPRD, prd); |
| 207 | } |
| 208 | } |
| 209 | |
| 210 | static int atmel_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm, |
| 211 | enum pwm_polarity polarity) |
| 212 | { |
| 213 | struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip); |
| 214 | u32 val; |
| 215 | int ret; |
| 216 | |
| 217 | val = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, PWM_CMR); |
| 218 | |
| 219 | if (polarity == PWM_POLARITY_NORMAL) |
| 220 | val &= ~PWM_CMR_CPOL; |
| 221 | else |
| 222 | val |= PWM_CMR_CPOL; |
| 223 | |
| 224 | ret = clk_enable(atmel_pwm->clk); |
| 225 | if (ret) { |
| 226 | dev_err(chip->dev, "failed to enable PWM clock\n"); |
| 227 | return ret; |
| 228 | } |
| 229 | |
| 230 | atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, val); |
| 231 | |
| 232 | clk_disable(atmel_pwm->clk); |
| 233 | |
| 234 | return 0; |
| 235 | } |
| 236 | |
| 237 | static int atmel_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) |
| 238 | { |
| 239 | struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip); |
| 240 | int ret; |
| 241 | |
| 242 | ret = clk_enable(atmel_pwm->clk); |
| 243 | if (ret) { |
| 244 | dev_err(chip->dev, "failed to enable PWM clock\n"); |
| 245 | return ret; |
| 246 | } |
| 247 | |
| 248 | atmel_pwm_writel(atmel_pwm, PWM_ENA, 1 << pwm->hwpwm); |
| 249 | |
| 250 | return 0; |
| 251 | } |
| 252 | |
| 253 | static void atmel_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) |
| 254 | { |
| 255 | struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip); |
Alexandre Belloni | 472ac3d | 2015-05-25 18:11:49 +0200 | [diff] [blame] | 256 | unsigned long timeout = jiffies + 2 * HZ; |
Bo Shen | 32b16d4 | 2013-12-13 14:41:49 +0800 | [diff] [blame] | 257 | |
Alexandre Belloni | 472ac3d | 2015-05-25 18:11:49 +0200 | [diff] [blame] | 258 | /* |
| 259 | * Wait for at least a complete period to have passed before disabling a |
| 260 | * channel to be sure that CDTY has been updated |
| 261 | */ |
| 262 | mutex_lock(&atmel_pwm->isr_lock); |
| 263 | atmel_pwm->updated_pwms |= atmel_pwm_readl(atmel_pwm, PWM_ISR); |
| 264 | |
| 265 | while (!(atmel_pwm->updated_pwms & (1 << pwm->hwpwm)) && |
| 266 | time_before(jiffies, timeout)) { |
| 267 | usleep_range(10, 100); |
| 268 | atmel_pwm->updated_pwms |= atmel_pwm_readl(atmel_pwm, PWM_ISR); |
| 269 | } |
| 270 | |
| 271 | mutex_unlock(&atmel_pwm->isr_lock); |
Bo Shen | 32b16d4 | 2013-12-13 14:41:49 +0800 | [diff] [blame] | 272 | atmel_pwm_writel(atmel_pwm, PWM_DIS, 1 << pwm->hwpwm); |
| 273 | |
| 274 | clk_disable(atmel_pwm->clk); |
| 275 | } |
| 276 | |
| 277 | static const struct pwm_ops atmel_pwm_ops = { |
| 278 | .config = atmel_pwm_config, |
| 279 | .set_polarity = atmel_pwm_set_polarity, |
| 280 | .enable = atmel_pwm_enable, |
| 281 | .disable = atmel_pwm_disable, |
| 282 | .owner = THIS_MODULE, |
| 283 | }; |
| 284 | |
| 285 | struct atmel_pwm_data { |
| 286 | void (*config)(struct pwm_chip *chip, struct pwm_device *pwm, |
| 287 | unsigned long dty, unsigned long prd); |
| 288 | }; |
| 289 | |
| 290 | static const struct atmel_pwm_data atmel_pwm_data_v1 = { |
| 291 | .config = atmel_pwm_config_v1, |
| 292 | }; |
| 293 | |
| 294 | static const struct atmel_pwm_data atmel_pwm_data_v2 = { |
| 295 | .config = atmel_pwm_config_v2, |
| 296 | }; |
| 297 | |
| 298 | static const struct platform_device_id atmel_pwm_devtypes[] = { |
| 299 | { |
| 300 | .name = "at91sam9rl-pwm", |
| 301 | .driver_data = (kernel_ulong_t)&atmel_pwm_data_v1, |
| 302 | }, { |
| 303 | .name = "sama5d3-pwm", |
| 304 | .driver_data = (kernel_ulong_t)&atmel_pwm_data_v2, |
| 305 | }, { |
| 306 | /* sentinel */ |
| 307 | }, |
| 308 | }; |
| 309 | MODULE_DEVICE_TABLE(platform, atmel_pwm_devtypes); |
| 310 | |
| 311 | static const struct of_device_id atmel_pwm_dt_ids[] = { |
| 312 | { |
| 313 | .compatible = "atmel,at91sam9rl-pwm", |
| 314 | .data = &atmel_pwm_data_v1, |
| 315 | }, { |
| 316 | .compatible = "atmel,sama5d3-pwm", |
| 317 | .data = &atmel_pwm_data_v2, |
| 318 | }, { |
| 319 | /* sentinel */ |
| 320 | }, |
| 321 | }; |
| 322 | MODULE_DEVICE_TABLE(of, atmel_pwm_dt_ids); |
| 323 | |
| 324 | static inline const struct atmel_pwm_data * |
| 325 | atmel_pwm_get_driver_data(struct platform_device *pdev) |
| 326 | { |
| 327 | if (pdev->dev.of_node) { |
| 328 | const struct of_device_id *match; |
| 329 | |
| 330 | match = of_match_device(atmel_pwm_dt_ids, &pdev->dev); |
| 331 | if (!match) |
| 332 | return NULL; |
| 333 | |
| 334 | return match->data; |
| 335 | } else { |
| 336 | const struct platform_device_id *id; |
| 337 | |
| 338 | id = platform_get_device_id(pdev); |
| 339 | |
| 340 | return (struct atmel_pwm_data *)id->driver_data; |
| 341 | } |
| 342 | } |
| 343 | |
| 344 | static int atmel_pwm_probe(struct platform_device *pdev) |
| 345 | { |
| 346 | const struct atmel_pwm_data *data; |
| 347 | struct atmel_pwm_chip *atmel_pwm; |
| 348 | struct resource *res; |
| 349 | int ret; |
| 350 | |
| 351 | data = atmel_pwm_get_driver_data(pdev); |
| 352 | if (!data) |
| 353 | return -ENODEV; |
| 354 | |
| 355 | atmel_pwm = devm_kzalloc(&pdev->dev, sizeof(*atmel_pwm), GFP_KERNEL); |
| 356 | if (!atmel_pwm) |
| 357 | return -ENOMEM; |
| 358 | |
| 359 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 360 | atmel_pwm->base = devm_ioremap_resource(&pdev->dev, res); |
| 361 | if (IS_ERR(atmel_pwm->base)) |
| 362 | return PTR_ERR(atmel_pwm->base); |
| 363 | |
| 364 | atmel_pwm->clk = devm_clk_get(&pdev->dev, NULL); |
| 365 | if (IS_ERR(atmel_pwm->clk)) |
| 366 | return PTR_ERR(atmel_pwm->clk); |
| 367 | |
| 368 | ret = clk_prepare(atmel_pwm->clk); |
| 369 | if (ret) { |
| 370 | dev_err(&pdev->dev, "failed to prepare PWM clock\n"); |
| 371 | return ret; |
| 372 | } |
| 373 | |
| 374 | atmel_pwm->chip.dev = &pdev->dev; |
| 375 | atmel_pwm->chip.ops = &atmel_pwm_ops; |
| 376 | |
| 377 | if (pdev->dev.of_node) { |
| 378 | atmel_pwm->chip.of_xlate = of_pwm_xlate_with_flags; |
| 379 | atmel_pwm->chip.of_pwm_n_cells = 3; |
| 380 | } |
| 381 | |
| 382 | atmel_pwm->chip.base = -1; |
| 383 | atmel_pwm->chip.npwm = 4; |
Alexandre Belloni | cf3a384 | 2014-04-09 20:26:09 +0200 | [diff] [blame] | 384 | atmel_pwm->chip.can_sleep = true; |
Bo Shen | 32b16d4 | 2013-12-13 14:41:49 +0800 | [diff] [blame] | 385 | atmel_pwm->config = data->config; |
Alexandre Belloni | 472ac3d | 2015-05-25 18:11:49 +0200 | [diff] [blame] | 386 | atmel_pwm->updated_pwms = 0; |
| 387 | mutex_init(&atmel_pwm->isr_lock); |
Bo Shen | 32b16d4 | 2013-12-13 14:41:49 +0800 | [diff] [blame] | 388 | |
| 389 | ret = pwmchip_add(&atmel_pwm->chip); |
| 390 | if (ret < 0) { |
| 391 | dev_err(&pdev->dev, "failed to add PWM chip %d\n", ret); |
| 392 | goto unprepare_clk; |
| 393 | } |
| 394 | |
| 395 | platform_set_drvdata(pdev, atmel_pwm); |
| 396 | |
Bo Shen | 6a68335 | 2013-12-19 11:42:22 +0800 | [diff] [blame] | 397 | return ret; |
| 398 | |
Bo Shen | 32b16d4 | 2013-12-13 14:41:49 +0800 | [diff] [blame] | 399 | unprepare_clk: |
| 400 | clk_unprepare(atmel_pwm->clk); |
| 401 | return ret; |
| 402 | } |
| 403 | |
| 404 | static int atmel_pwm_remove(struct platform_device *pdev) |
| 405 | { |
| 406 | struct atmel_pwm_chip *atmel_pwm = platform_get_drvdata(pdev); |
| 407 | |
| 408 | clk_unprepare(atmel_pwm->clk); |
Alexandre Belloni | 472ac3d | 2015-05-25 18:11:49 +0200 | [diff] [blame] | 409 | mutex_destroy(&atmel_pwm->isr_lock); |
Bo Shen | 32b16d4 | 2013-12-13 14:41:49 +0800 | [diff] [blame] | 410 | |
| 411 | return pwmchip_remove(&atmel_pwm->chip); |
| 412 | } |
| 413 | |
| 414 | static struct platform_driver atmel_pwm_driver = { |
| 415 | .driver = { |
| 416 | .name = "atmel-pwm", |
| 417 | .of_match_table = of_match_ptr(atmel_pwm_dt_ids), |
| 418 | }, |
| 419 | .id_table = atmel_pwm_devtypes, |
| 420 | .probe = atmel_pwm_probe, |
| 421 | .remove = atmel_pwm_remove, |
| 422 | }; |
| 423 | module_platform_driver(atmel_pwm_driver); |
| 424 | |
| 425 | MODULE_ALIAS("platform:atmel-pwm"); |
| 426 | MODULE_AUTHOR("Bo Shen <voice.shen@atmel.com>"); |
| 427 | MODULE_DESCRIPTION("Atmel PWM driver"); |
| 428 | MODULE_LICENSE("GPL v2"); |