blob: 3a51ad7e47c8c67c95da5f3691d7f89e397c34a6 [file] [log] [blame]
Benjamin Herrenschmidt43501472005-11-07 14:27:33 +11001/*
2 * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>
3 * and Markus Demleitner <msdemlei@cl.uni-heidelberg.de>
4 *
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License version 2 as
7 * published by the Free Software Foundation.
8 *
9 * This driver adds basic cpufreq support for SMU & 970FX based G5 Macs,
10 * that is iMac G5 and latest single CPU desktop.
11 */
12
Benjamin Herrenschmidt7ed14c22006-07-06 15:09:19 +100013#undef DEBUG
14
Benjamin Herrenschmidt43501472005-11-07 14:27:33 +110015#include <linux/module.h>
16#include <linux/types.h>
17#include <linux/errno.h>
18#include <linux/kernel.h>
19#include <linux/delay.h>
20#include <linux/sched.h>
Benjamin Herrenschmidt43501472005-11-07 14:27:33 +110021#include <linux/cpufreq.h>
22#include <linux/init.h>
23#include <linux/completion.h>
Ingo Molnar14cc3e22006-03-26 01:37:14 -080024#include <linux/mutex.h>
Sudeep KarkadaNagesha760287a2013-07-17 13:42:56 +010025#include <linux/of_device.h>
Benjamin Herrenschmidt43501472005-11-07 14:27:33 +110026#include <asm/prom.h>
27#include <asm/machdep.h>
28#include <asm/irq.h>
29#include <asm/sections.h>
30#include <asm/cputable.h>
31#include <asm/time.h>
32#include <asm/smu.h>
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +110033#include <asm/pmac_pfunc.h>
Benjamin Herrenschmidt43501472005-11-07 14:27:33 +110034
Benjamin Herrenschmidt7ed14c22006-07-06 15:09:19 +100035#define DBG(fmt...) pr_debug(fmt)
Benjamin Herrenschmidt43501472005-11-07 14:27:33 +110036
37/* see 970FX user manual */
38
39#define SCOM_PCR 0x0aa001 /* PCR scom addr */
40
41#define PCR_HILO_SELECT 0x80000000U /* 1 = PCR, 0 = PCRH */
42#define PCR_SPEED_FULL 0x00000000U /* 1:1 speed value */
43#define PCR_SPEED_HALF 0x00020000U /* 1:2 speed value */
44#define PCR_SPEED_QUARTER 0x00040000U /* 1:4 speed value */
45#define PCR_SPEED_MASK 0x000e0000U /* speed mask */
46#define PCR_SPEED_SHIFT 17
47#define PCR_FREQ_REQ_VALID 0x00010000U /* freq request valid */
48#define PCR_VOLT_REQ_VALID 0x00008000U /* volt request valid */
49#define PCR_TARGET_TIME_MASK 0x00006000U /* target time */
50#define PCR_STATLAT_MASK 0x00001f00U /* STATLAT value */
51#define PCR_SNOOPLAT_MASK 0x000000f0U /* SNOOPLAT value */
52#define PCR_SNOOPACC_MASK 0x0000000fU /* SNOOPACC value */
53
54#define SCOM_PSR 0x408001 /* PSR scom addr */
55/* warning: PSR is a 64 bits register */
56#define PSR_CMD_RECEIVED 0x2000000000000000U /* command received */
57#define PSR_CMD_COMPLETED 0x1000000000000000U /* command completed */
58#define PSR_CUR_SPEED_MASK 0x0300000000000000U /* current speed */
59#define PSR_CUR_SPEED_SHIFT (56)
60
61/*
62 * The G5 only supports two frequencies (Quarter speed is not supported)
63 */
64#define CPUFREQ_HIGH 0
65#define CPUFREQ_LOW 1
66
67static struct cpufreq_frequency_table g5_cpu_freqs[] = {
68 {CPUFREQ_HIGH, 0},
69 {CPUFREQ_LOW, 0},
70 {0, CPUFREQ_TABLE_END},
71};
72
73static struct freq_attr* g5_cpu_freqs_attr[] = {
74 &cpufreq_freq_attr_scaling_available_freqs,
75 NULL,
76};
77
78/* Power mode data is an array of the 32 bits PCR values to use for
Adrian Bunk943ffb52006-01-10 00:10:13 +010079 * the various frequencies, retrieved from the device-tree
Benjamin Herrenschmidt43501472005-11-07 14:27:33 +110080 */
Benjamin Herrenschmidt43501472005-11-07 14:27:33 +110081static int g5_pmode_cur;
82
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +110083static void (*g5_switch_volt)(int speed_mode);
84static int (*g5_switch_freq)(int speed_mode);
85static int (*g5_query_freq)(void);
86
Ingo Molnar14cc3e22006-03-26 01:37:14 -080087static DEFINE_MUTEX(g5_switch_mutex);
Benjamin Herrenschmidt43501472005-11-07 14:27:33 +110088
Nick Piggin16962e72009-02-19 07:07:41 +000089static unsigned long transition_latency;
Benjamin Herrenschmidt43501472005-11-07 14:27:33 +110090
Benjamin Herrenschmidte272a282006-07-10 16:44:54 +100091#ifdef CONFIG_PMAC_SMU
Benjamin Herrenschmidt7ed14c22006-07-06 15:09:19 +100092
Stephen Rothwell9ca91e02006-09-14 16:59:31 +100093static const u32 *g5_pmode_data;
Benjamin Herrenschmidt7ed14c22006-07-06 15:09:19 +100094static int g5_pmode_max;
95
Benjamin Herrenschmidt43501472005-11-07 14:27:33 +110096static struct smu_sdbp_fvt *g5_fvt_table; /* table of op. points */
97static int g5_fvt_count; /* number of op. points */
98static int g5_fvt_cur; /* current op. point */
99
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100100/*
101 * SMU based voltage switching for Neo2 platforms
102 */
Benjamin Herrenschmidt43501472005-11-07 14:27:33 +1100103
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100104static void g5_smu_switch_volt(int speed_mode)
Benjamin Herrenschmidt43501472005-11-07 14:27:33 +1100105{
106 struct smu_simple_cmd cmd;
107
Peter Zijlstra6e9a4732006-09-30 23:28:10 -0700108 DECLARE_COMPLETION_ONSTACK(comp);
Benjamin Herrenschmidt43501472005-11-07 14:27:33 +1100109 smu_queue_simple(&cmd, SMU_CMD_POWER_COMMAND, 8, smu_done_complete,
110 &comp, 'V', 'S', 'L', 'E', 'W',
111 0xff, g5_fvt_cur+1, speed_mode);
112 wait_for_completion(&comp);
113}
114
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100115/*
116 * Platform function based voltage/vdnap switching for Neo2
117 */
118
119static struct pmf_function *pfunc_set_vdnap0;
120static struct pmf_function *pfunc_vdnap0_complete;
121
122static void g5_vdnap_switch_volt(int speed_mode)
Benjamin Herrenschmidt43501472005-11-07 14:27:33 +1100123{
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100124 struct pmf_args args;
125 u32 slew, done = 0;
126 unsigned long timeout;
127
128 slew = (speed_mode == CPUFREQ_LOW) ? 1 : 0;
129 args.count = 1;
130 args.u[0].p = &slew;
131
132 pmf_call_one(pfunc_set_vdnap0, &args);
133
134 /* It's an irq GPIO so we should be able to just block here,
135 * I'll do that later after I've properly tested the IRQ code for
136 * platform functions
137 */
138 timeout = jiffies + HZ/10;
139 while(!time_after(jiffies, timeout)) {
140 args.count = 1;
141 args.u[0].p = &done;
142 pmf_call_one(pfunc_vdnap0_complete, &args);
143 if (done)
144 break;
145 msleep(1);
146 }
147 if (done == 0)
148 printk(KERN_WARNING "cpufreq: Timeout in clock slewing !\n");
149}
150
151
152/*
153 * SCOM based frequency switching for 970FX rev3
154 */
155static int g5_scom_switch_freq(int speed_mode)
156{
157 unsigned long flags;
Benjamin Herrenschmidt43501472005-11-07 14:27:33 +1100158 int to;
159
Benjamin Herrenschmidt43501472005-11-07 14:27:33 +1100160 /* If frequency is going up, first ramp up the voltage */
161 if (speed_mode < g5_pmode_cur)
162 g5_switch_volt(speed_mode);
163
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100164 local_irq_save(flags);
165
Benjamin Herrenschmidt43501472005-11-07 14:27:33 +1100166 /* Clear PCR high */
167 scom970_write(SCOM_PCR, 0);
168 /* Clear PCR low */
169 scom970_write(SCOM_PCR, PCR_HILO_SELECT | 0);
170 /* Set PCR low */
171 scom970_write(SCOM_PCR, PCR_HILO_SELECT |
172 g5_pmode_data[speed_mode]);
173
174 /* Wait for completion */
175 for (to = 0; to < 10; to++) {
176 unsigned long psr = scom970_read(SCOM_PSR);
177
178 if ((psr & PSR_CMD_RECEIVED) == 0 &&
179 (((psr >> PSR_CUR_SPEED_SHIFT) ^
180 (g5_pmode_data[speed_mode] >> PCR_SPEED_SHIFT)) & 0x3)
181 == 0)
182 break;
183 if (psr & PSR_CMD_COMPLETED)
184 break;
185 udelay(100);
186 }
187
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100188 local_irq_restore(flags);
189
Benjamin Herrenschmidt43501472005-11-07 14:27:33 +1100190 /* If frequency is going down, last ramp the voltage */
191 if (speed_mode > g5_pmode_cur)
192 g5_switch_volt(speed_mode);
193
194 g5_pmode_cur = speed_mode;
195 ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul;
196
Benjamin Herrenschmidt43501472005-11-07 14:27:33 +1100197 return 0;
198}
199
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100200static int g5_scom_query_freq(void)
Benjamin Herrenschmidt43501472005-11-07 14:27:33 +1100201{
202 unsigned long psr = scom970_read(SCOM_PSR);
203 int i;
204
205 for (i = 0; i <= g5_pmode_max; i++)
206 if ((((psr >> PSR_CUR_SPEED_SHIFT) ^
207 (g5_pmode_data[i] >> PCR_SPEED_SHIFT)) & 0x3) == 0)
208 break;
209 return i;
210}
211
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100212/*
Benjamin Herrenschmidt7ed14c22006-07-06 15:09:19 +1000213 * Fake voltage switching for platforms with missing support
214 */
215
216static void g5_dummy_switch_volt(int speed_mode)
217{
218}
219
Benjamin Herrenschmidte272a282006-07-10 16:44:54 +1000220#endif /* CONFIG_PMAC_SMU */
Benjamin Herrenschmidt7ed14c22006-07-06 15:09:19 +1000221
222/*
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100223 * Platform function based voltage switching for PowerMac7,2 & 7,3
224 */
225
226static struct pmf_function *pfunc_cpu0_volt_high;
227static struct pmf_function *pfunc_cpu0_volt_low;
228static struct pmf_function *pfunc_cpu1_volt_high;
229static struct pmf_function *pfunc_cpu1_volt_low;
230
231static void g5_pfunc_switch_volt(int speed_mode)
232{
233 if (speed_mode == CPUFREQ_HIGH) {
234 if (pfunc_cpu0_volt_high)
235 pmf_call_one(pfunc_cpu0_volt_high, NULL);
236 if (pfunc_cpu1_volt_high)
237 pmf_call_one(pfunc_cpu1_volt_high, NULL);
238 } else {
239 if (pfunc_cpu0_volt_low)
240 pmf_call_one(pfunc_cpu0_volt_low, NULL);
241 if (pfunc_cpu1_volt_low)
242 pmf_call_one(pfunc_cpu1_volt_low, NULL);
243 }
244 msleep(10); /* should be faster , to fix */
245}
246
247/*
248 * Platform function based frequency switching for PowerMac7,2 & 7,3
249 */
250
251static struct pmf_function *pfunc_cpu_setfreq_high;
252static struct pmf_function *pfunc_cpu_setfreq_low;
253static struct pmf_function *pfunc_cpu_getfreq;
Joe Perchesd258e642009-06-28 06:26:10 +0000254static struct pmf_function *pfunc_slewing_done;
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100255
256static int g5_pfunc_switch_freq(int speed_mode)
257{
258 struct pmf_args args;
259 u32 done = 0;
260 unsigned long timeout;
Benjamin Herrenschmidt7ed14c22006-07-06 15:09:19 +1000261 int rc;
262
263 DBG("g5_pfunc_switch_freq(%d)\n", speed_mode);
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100264
265 /* If frequency is going up, first ramp up the voltage */
266 if (speed_mode < g5_pmode_cur)
267 g5_switch_volt(speed_mode);
268
269 /* Do it */
270 if (speed_mode == CPUFREQ_HIGH)
Benjamin Herrenschmidt7ed14c22006-07-06 15:09:19 +1000271 rc = pmf_call_one(pfunc_cpu_setfreq_high, NULL);
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100272 else
Benjamin Herrenschmidt7ed14c22006-07-06 15:09:19 +1000273 rc = pmf_call_one(pfunc_cpu_setfreq_low, NULL);
274
275 if (rc)
276 printk(KERN_WARNING "cpufreq: pfunc switch error %d\n", rc);
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100277
278 /* It's an irq GPIO so we should be able to just block here,
279 * I'll do that later after I've properly tested the IRQ code for
280 * platform functions
281 */
282 timeout = jiffies + HZ/10;
283 while(!time_after(jiffies, timeout)) {
284 args.count = 1;
285 args.u[0].p = &done;
286 pmf_call_one(pfunc_slewing_done, &args);
287 if (done)
288 break;
289 msleep(1);
290 }
291 if (done == 0)
292 printk(KERN_WARNING "cpufreq: Timeout in clock slewing !\n");
293
294 /* If frequency is going down, last ramp the voltage */
295 if (speed_mode > g5_pmode_cur)
296 g5_switch_volt(speed_mode);
297
298 g5_pmode_cur = speed_mode;
299 ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul;
300
301 return 0;
302}
303
304static int g5_pfunc_query_freq(void)
305{
306 struct pmf_args args;
307 u32 val = 0;
308
309 args.count = 1;
310 args.u[0].p = &val;
311 pmf_call_one(pfunc_cpu_getfreq, &args);
312 return val ? CPUFREQ_HIGH : CPUFREQ_LOW;
313}
314
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100315
316/*
317 * Common interface to the cpufreq core
318 */
Benjamin Herrenschmidt43501472005-11-07 14:27:33 +1100319
320static int g5_cpufreq_verify(struct cpufreq_policy *policy)
321{
322 return cpufreq_frequency_table_verify(policy, g5_cpu_freqs);
323}
324
325static int g5_cpufreq_target(struct cpufreq_policy *policy,
326 unsigned int target_freq, unsigned int relation)
327{
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100328 unsigned int newstate = 0;
329 struct cpufreq_freqs freqs;
330 int rc;
Benjamin Herrenschmidt43501472005-11-07 14:27:33 +1100331
332 if (cpufreq_frequency_table_target(policy, g5_cpu_freqs,
333 target_freq, relation, &newstate))
334 return -EINVAL;
335
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100336 if (g5_pmode_cur == newstate)
337 return 0;
338
Ingo Molnar14cc3e22006-03-26 01:37:14 -0800339 mutex_lock(&g5_switch_mutex);
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100340
341 freqs.old = g5_cpu_freqs[g5_pmode_cur].frequency;
342 freqs.new = g5_cpu_freqs[newstate].frequency;
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100343
Viresh Kumarb43a7ff2013-03-24 11:56:43 +0530344 cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100345 rc = g5_switch_freq(newstate);
Viresh Kumarb43a7ff2013-03-24 11:56:43 +0530346 cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100347
Ingo Molnar14cc3e22006-03-26 01:37:14 -0800348 mutex_unlock(&g5_switch_mutex);
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100349
350 return rc;
Benjamin Herrenschmidt43501472005-11-07 14:27:33 +1100351}
352
353static unsigned int g5_cpufreq_get_speed(unsigned int cpu)
354{
355 return g5_cpu_freqs[g5_pmode_cur].frequency;
356}
357
358static int g5_cpufreq_cpu_init(struct cpufreq_policy *policy)
359{
Nick Piggin16962e72009-02-19 07:07:41 +0000360 policy->cpuinfo.transition_latency = transition_latency;
Benjamin Herrenschmidt43501472005-11-07 14:27:33 +1100361 policy->cur = g5_cpu_freqs[g5_query_freq()].frequency;
Johannes Berg8fce6dd2007-03-21 21:40:42 +1100362 /* secondary CPUs are tied to the primary one by the
363 * cpufreq core if in the secondary policy we tell it that
364 * it actually must be one policy together with all others. */
Anton Blanchard1b095cf2010-04-26 15:32:32 +0000365 cpumask_copy(policy->cpus, cpu_online_mask);
Benjamin Herrenschmidt43501472005-11-07 14:27:33 +1100366 cpufreq_frequency_table_get_attr(g5_cpu_freqs, policy->cpu);
367
368 return cpufreq_frequency_table_cpuinfo(policy,
369 g5_cpu_freqs);
370}
371
372
373static struct cpufreq_driver g5_cpufreq_driver = {
374 .name = "powermac",
Benjamin Herrenschmidt43501472005-11-07 14:27:33 +1100375 .flags = CPUFREQ_CONST_LOOPS,
376 .init = g5_cpufreq_cpu_init,
377 .verify = g5_cpufreq_verify,
378 .target = g5_cpufreq_target,
379 .get = g5_cpufreq_get_speed,
380 .attr = g5_cpu_freqs_attr,
381};
382
383
Benjamin Herrenschmidte272a282006-07-10 16:44:54 +1000384#ifdef CONFIG_PMAC_SMU
Benjamin Herrenschmidt7ed14c22006-07-06 15:09:19 +1000385
Sudeep KarkadaNagesha760287a2013-07-17 13:42:56 +0100386static int __init g5_neo2_cpufreq_init(struct device_node *cpunode)
Benjamin Herrenschmidt43501472005-11-07 14:27:33 +1100387{
Benjamin Herrenschmidt43501472005-11-07 14:27:33 +1100388 unsigned int psize, ssize;
Benjamin Herrenschmidt43501472005-11-07 14:27:33 +1100389 unsigned long max_freq;
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100390 char *freq_method, *volt_method;
Jeremy Kerr018a3d12006-07-12 15:40:29 +1000391 const u32 *valp;
392 u32 pvr_hi;
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100393 int use_volts_vdnap = 0;
394 int use_volts_smu = 0;
Benjamin Herrenschmidt43501472005-11-07 14:27:33 +1100395 int rc = -ENODEV;
396
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100397 /* Check supported platforms */
Grant Likely71a157e2010-02-01 21:34:14 -0700398 if (of_machine_is_compatible("PowerMac8,1") ||
399 of_machine_is_compatible("PowerMac8,2") ||
400 of_machine_is_compatible("PowerMac9,1"))
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100401 use_volts_smu = 1;
Grant Likely71a157e2010-02-01 21:34:14 -0700402 else if (of_machine_is_compatible("PowerMac11,2"))
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100403 use_volts_vdnap = 1;
404 else
405 return -ENODEV;
406
Benjamin Herrenschmidt43501472005-11-07 14:27:33 +1100407 /* Check 970FX for now */
Stephen Rothwelle2eb6392007-04-03 22:26:41 +1000408 valp = of_get_property(cpunode, "cpu-version", NULL);
Benjamin Herrenschmidt43501472005-11-07 14:27:33 +1100409 if (!valp) {
410 DBG("No cpu-version property !\n");
411 goto bail_noprops;
412 }
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100413 pvr_hi = (*valp) >> 16;
414 if (pvr_hi != 0x3c && pvr_hi != 0x44) {
415 printk(KERN_ERR "cpufreq: Unsupported CPU version\n");
Benjamin Herrenschmidt43501472005-11-07 14:27:33 +1100416 goto bail_noprops;
417 }
418
419 /* Look for the powertune data in the device-tree */
Stephen Rothwelle2eb6392007-04-03 22:26:41 +1000420 g5_pmode_data = of_get_property(cpunode, "power-mode-data",&psize);
Benjamin Herrenschmidt43501472005-11-07 14:27:33 +1100421 if (!g5_pmode_data) {
422 DBG("No power-mode-data !\n");
423 goto bail_noprops;
424 }
425 g5_pmode_max = psize / sizeof(u32) - 1;
426
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100427 if (use_volts_smu) {
Jeremy Kerr018a3d12006-07-12 15:40:29 +1000428 const struct smu_sdbp_header *shdr;
Benjamin Herrenschmidt43501472005-11-07 14:27:33 +1100429
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100430 /* Look for the FVT table */
431 shdr = smu_get_sdb_partition(SMU_SDB_FVT_ID, NULL);
432 if (!shdr)
433 goto bail_noprops;
434 g5_fvt_table = (struct smu_sdbp_fvt *)&shdr[1];
Viresh Kumard5b73cd2013-08-06 22:53:06 +0530435 ssize = (shdr->len * sizeof(u32)) - sizeof(*shdr);
436 g5_fvt_count = ssize / sizeof(*g5_fvt_table);
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100437 g5_fvt_cur = 0;
438
439 /* Sanity checking */
440 if (g5_fvt_count < 1 || g5_pmode_max < 1)
441 goto bail_noprops;
442
443 g5_switch_volt = g5_smu_switch_volt;
444 volt_method = "SMU";
445 } else if (use_volts_vdnap) {
446 struct device_node *root;
447
448 root = of_find_node_by_path("/");
449 if (root == NULL) {
450 printk(KERN_ERR "cpufreq: Can't find root of "
451 "device tree\n");
452 goto bail_noprops;
453 }
454 pfunc_set_vdnap0 = pmf_find_function(root, "set-vdnap0");
455 pfunc_vdnap0_complete =
456 pmf_find_function(root, "slewing-done");
457 if (pfunc_set_vdnap0 == NULL ||
458 pfunc_vdnap0_complete == NULL) {
459 printk(KERN_ERR "cpufreq: Can't find required "
460 "platform function\n");
461 goto bail_noprops;
462 }
463
464 g5_switch_volt = g5_vdnap_switch_volt;
465 volt_method = "GPIO";
466 } else {
467 g5_switch_volt = g5_dummy_switch_volt;
468 volt_method = "none";
469 }
Benjamin Herrenschmidt43501472005-11-07 14:27:33 +1100470
471 /*
472 * From what I see, clock-frequency is always the maximal frequency.
473 * The current driver can not slew sysclk yet, so we really only deal
474 * with powertune steps for now. We also only implement full freq and
475 * half freq in this version. So far, I haven't yet seen a machine
476 * supporting anything else.
477 */
Stephen Rothwelle2eb6392007-04-03 22:26:41 +1000478 valp = of_get_property(cpunode, "clock-frequency", NULL);
Benjamin Herrenschmidt43501472005-11-07 14:27:33 +1100479 if (!valp)
480 return -ENODEV;
481 max_freq = (*valp)/1000;
482 g5_cpu_freqs[0].frequency = max_freq;
483 g5_cpu_freqs[1].frequency = max_freq/2;
484
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100485 /* Set callbacks */
Nick Piggin16962e72009-02-19 07:07:41 +0000486 transition_latency = 12000;
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100487 g5_switch_freq = g5_scom_switch_freq;
488 g5_query_freq = g5_scom_query_freq;
489 freq_method = "SCOM";
Benjamin Herrenschmidt43501472005-11-07 14:27:33 +1100490
491 /* Force apply current frequency to make sure everything is in
492 * sync (voltage is right for example). Firmware may leave us with
493 * a strange setting ...
494 */
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100495 g5_switch_volt(CPUFREQ_HIGH);
496 msleep(10);
497 g5_pmode_cur = -1;
498 g5_switch_freq(g5_query_freq());
Benjamin Herrenschmidt43501472005-11-07 14:27:33 +1100499
500 printk(KERN_INFO "Registering G5 CPU frequency driver\n");
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100501 printk(KERN_INFO "Frequency method: %s, Voltage method: %s\n",
502 freq_method, volt_method);
Benjamin Herrenschmidt43501472005-11-07 14:27:33 +1100503 printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n",
504 g5_cpu_freqs[1].frequency/1000,
505 g5_cpu_freqs[0].frequency/1000,
506 g5_cpu_freqs[g5_pmode_cur].frequency/1000);
507
508 rc = cpufreq_register_driver(&g5_cpufreq_driver);
509
510 /* We keep the CPU node on hold... hopefully, Apple G5 don't have
511 * hotplug CPU with a dynamic device-tree ...
512 */
513 return rc;
514
515 bail_noprops:
516 of_node_put(cpunode);
517
518 return rc;
519}
520
Benjamin Herrenschmidte272a282006-07-10 16:44:54 +1000521#endif /* CONFIG_PMAC_SMU */
Benjamin Herrenschmidt7ed14c22006-07-06 15:09:19 +1000522
523
Sudeep KarkadaNagesha760287a2013-07-17 13:42:56 +0100524static int __init g5_pm72_cpufreq_init(struct device_node *cpunode)
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100525{
Sudeep KarkadaNagesha760287a2013-07-17 13:42:56 +0100526 struct device_node *cpuid = NULL, *hwclock = NULL;
Jeremy Kerr018a3d12006-07-12 15:40:29 +1000527 const u8 *eeprom = NULL;
528 const u32 *valp;
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100529 u64 max_freq, min_freq, ih, il;
530 int has_volt = 1, rc = 0;
531
Benjamin Herrenschmidt7ed14c22006-07-06 15:09:19 +1000532 DBG("cpufreq: Initializing for PowerMac7,2, PowerMac7,3 and"
533 " RackMac3,1...\n");
534
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100535 /* Lookup the cpuid eeprom node */
536 cpuid = of_find_node_by_path("/u3@0,f8000000/i2c@f8001000/cpuid@a0");
537 if (cpuid != NULL)
Stephen Rothwelle2eb6392007-04-03 22:26:41 +1000538 eeprom = of_get_property(cpuid, "cpuid", NULL);
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100539 if (eeprom == NULL) {
540 printk(KERN_ERR "cpufreq: Can't find cpuid EEPROM !\n");
541 rc = -ENODEV;
542 goto bail;
543 }
544
545 /* Lookup the i2c hwclock */
546 for (hwclock = NULL;
547 (hwclock = of_find_node_by_name(hwclock, "i2c-hwclock")) != NULL;){
Stephen Rothwelle2eb6392007-04-03 22:26:41 +1000548 const char *loc = of_get_property(hwclock,
Jeremy Kerr018a3d12006-07-12 15:40:29 +1000549 "hwctrl-location", NULL);
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100550 if (loc == NULL)
551 continue;
552 if (strcmp(loc, "CPU CLOCK"))
553 continue;
Stephen Rothwelle2eb6392007-04-03 22:26:41 +1000554 if (!of_get_property(hwclock, "platform-get-frequency", NULL))
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100555 continue;
556 break;
557 }
558 if (hwclock == NULL) {
559 printk(KERN_ERR "cpufreq: Can't find i2c clock chip !\n");
560 rc = -ENODEV;
561 goto bail;
562 }
563
564 DBG("cpufreq: i2c clock chip found: %s\n", hwclock->full_name);
565
566 /* Now get all the platform functions */
567 pfunc_cpu_getfreq =
568 pmf_find_function(hwclock, "get-frequency");
569 pfunc_cpu_setfreq_high =
570 pmf_find_function(hwclock, "set-frequency-high");
571 pfunc_cpu_setfreq_low =
572 pmf_find_function(hwclock, "set-frequency-low");
573 pfunc_slewing_done =
574 pmf_find_function(hwclock, "slewing-done");
575 pfunc_cpu0_volt_high =
576 pmf_find_function(hwclock, "set-voltage-high-0");
577 pfunc_cpu0_volt_low =
578 pmf_find_function(hwclock, "set-voltage-low-0");
579 pfunc_cpu1_volt_high =
580 pmf_find_function(hwclock, "set-voltage-high-1");
581 pfunc_cpu1_volt_low =
582 pmf_find_function(hwclock, "set-voltage-low-1");
583
584 /* Check we have minimum requirements */
585 if (pfunc_cpu_getfreq == NULL || pfunc_cpu_setfreq_high == NULL ||
586 pfunc_cpu_setfreq_low == NULL || pfunc_slewing_done == NULL) {
587 printk(KERN_ERR "cpufreq: Can't find platform functions !\n");
588 rc = -ENODEV;
589 goto bail;
590 }
591
592 /* Check that we have complete sets */
593 if (pfunc_cpu0_volt_high == NULL || pfunc_cpu0_volt_low == NULL) {
594 pmf_put_function(pfunc_cpu0_volt_high);
595 pmf_put_function(pfunc_cpu0_volt_low);
596 pfunc_cpu0_volt_high = pfunc_cpu0_volt_low = NULL;
597 has_volt = 0;
598 }
599 if (!has_volt ||
600 pfunc_cpu1_volt_high == NULL || pfunc_cpu1_volt_low == NULL) {
601 pmf_put_function(pfunc_cpu1_volt_high);
602 pmf_put_function(pfunc_cpu1_volt_low);
603 pfunc_cpu1_volt_high = pfunc_cpu1_volt_low = NULL;
604 }
605
606 /* Note: The device tree also contains a "platform-set-values"
607 * function for which I haven't quite figured out the usage. It
608 * might have to be called on init and/or wakeup, I'm not too sure
609 * but things seem to work fine without it so far ...
610 */
611
612 /* Get max frequency from device-tree */
Stephen Rothwelle2eb6392007-04-03 22:26:41 +1000613 valp = of_get_property(cpunode, "clock-frequency", NULL);
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100614 if (!valp) {
615 printk(KERN_ERR "cpufreq: Can't find CPU frequency !\n");
616 rc = -ENODEV;
617 goto bail;
618 }
619
620 max_freq = (*valp)/1000;
621
622 /* Now calculate reduced frequency by using the cpuid input freq
623 * ratio. This requires 64 bits math unless we are willing to lose
624 * some precision
625 */
626 ih = *((u32 *)(eeprom + 0x10));
627 il = *((u32 *)(eeprom + 0x20));
Benjamin Herrenschmidt7ed14c22006-07-06 15:09:19 +1000628
629 /* Check for machines with no useful settings */
630 if (il == ih) {
631 printk(KERN_WARNING "cpufreq: No low frequency mode available"
632 " on this model !\n");
633 rc = -ENODEV;
634 goto bail;
635 }
636
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100637 min_freq = 0;
638 if (ih != 0 && il != 0)
639 min_freq = (max_freq * il) / ih;
640
641 /* Sanity check */
642 if (min_freq >= max_freq || min_freq < 1000) {
643 printk(KERN_ERR "cpufreq: Can't calculate low frequency !\n");
Benjamin Herrenschmidt7ed14c22006-07-06 15:09:19 +1000644 rc = -ENXIO;
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100645 goto bail;
646 }
647 g5_cpu_freqs[0].frequency = max_freq;
648 g5_cpu_freqs[1].frequency = min_freq;
649
650 /* Set callbacks */
Nick Piggin16962e72009-02-19 07:07:41 +0000651 transition_latency = CPUFREQ_ETERNAL;
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100652 g5_switch_volt = g5_pfunc_switch_volt;
653 g5_switch_freq = g5_pfunc_switch_freq;
654 g5_query_freq = g5_pfunc_query_freq;
655
656 /* Force apply current frequency to make sure everything is in
657 * sync (voltage is right for example). Firmware may leave us with
658 * a strange setting ...
659 */
660 g5_switch_volt(CPUFREQ_HIGH);
661 msleep(10);
662 g5_pmode_cur = -1;
663 g5_switch_freq(g5_query_freq());
664
665 printk(KERN_INFO "Registering G5 CPU frequency driver\n");
666 printk(KERN_INFO "Frequency method: i2c/pfunc, "
667 "Voltage method: %s\n", has_volt ? "i2c/pfunc" : "none");
668 printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n",
669 g5_cpu_freqs[1].frequency/1000,
670 g5_cpu_freqs[0].frequency/1000,
671 g5_cpu_freqs[g5_pmode_cur].frequency/1000);
672
673 rc = cpufreq_register_driver(&g5_cpufreq_driver);
674 bail:
675 if (rc != 0) {
676 pmf_put_function(pfunc_cpu_getfreq);
677 pmf_put_function(pfunc_cpu_setfreq_high);
678 pmf_put_function(pfunc_cpu_setfreq_low);
679 pmf_put_function(pfunc_slewing_done);
680 pmf_put_function(pfunc_cpu0_volt_high);
681 pmf_put_function(pfunc_cpu0_volt_low);
682 pmf_put_function(pfunc_cpu1_volt_high);
683 pmf_put_function(pfunc_cpu1_volt_low);
684 }
685 of_node_put(hwclock);
686 of_node_put(cpuid);
687 of_node_put(cpunode);
688
689 return rc;
690}
691
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100692static int __init g5_cpufreq_init(void)
693{
Sudeep KarkadaNagesha760287a2013-07-17 13:42:56 +0100694 struct device_node *cpunode;
Benjamin Herrenschmidt7ed14c22006-07-06 15:09:19 +1000695 int rc = 0;
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100696
Sudeep KarkadaNagesha760287a2013-07-17 13:42:56 +0100697 /* Get first CPU node */
698 cpunode = of_cpu_device_node_get(0);
699 if (cpunode == NULL) {
700 pr_err("cpufreq: Can't find any CPU node\n");
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100701 return -ENODEV;
702 }
703
Grant Likely71a157e2010-02-01 21:34:14 -0700704 if (of_machine_is_compatible("PowerMac7,2") ||
705 of_machine_is_compatible("PowerMac7,3") ||
706 of_machine_is_compatible("RackMac3,1"))
Sudeep KarkadaNagesha760287a2013-07-17 13:42:56 +0100707 rc = g5_pm72_cpufreq_init(cpunode);
Benjamin Herrenschmidte272a282006-07-10 16:44:54 +1000708#ifdef CONFIG_PMAC_SMU
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100709 else
Sudeep KarkadaNagesha760287a2013-07-17 13:42:56 +0100710 rc = g5_neo2_cpufreq_init(cpunode);
Benjamin Herrenschmidte272a282006-07-10 16:44:54 +1000711#endif /* CONFIG_PMAC_SMU */
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100712
Benjamin Herrenschmidt9a699ae2006-01-07 11:45:28 +1100713 return rc;
714}
715
Benjamin Herrenschmidt43501472005-11-07 14:27:33 +1100716module_init(g5_cpufreq_init);
717
718
719MODULE_LICENSE("GPL");