blob: 45b57c294d13b19b8d47f2e8b2292f68c8167485 [file] [log] [blame]
Wilson Ding30530792016-02-16 19:14:53 +01001/*
2* ***************************************************************************
Paul Gortmaker89ebc272016-03-13 19:48:52 -04003* Marvell Armada-3700 Serial Driver
4* Author: Wilson Ding <dingwei@marvell.com>
Wilson Ding30530792016-02-16 19:14:53 +01005* Copyright (C) 2015 Marvell International Ltd.
6* ***************************************************************************
7* This program is free software: you can redistribute it and/or modify it
8* under the terms of the GNU General Public License as published by the Free
9* Software Foundation, either version 2 of the License, or any later version.
10*
11* This program is distributed in the hope that it will be useful,
12* but WITHOUT ANY WARRANTY; without even the implied warranty of
13* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14* GNU General Public License for more details.
15*
16* You should have received a copy of the GNU General Public License
17* along with this program. If not, see <http://www.gnu.org/licenses/>.
18* ***************************************************************************
19*/
20
21#include <linux/clk.h>
22#include <linux/console.h>
23#include <linux/delay.h>
24#include <linux/device.h>
25#include <linux/init.h>
26#include <linux/io.h>
27#include <linux/iopoll.h>
Wilson Ding30530792016-02-16 19:14:53 +010028#include <linux/of.h>
29#include <linux/of_address.h>
30#include <linux/of_device.h>
31#include <linux/of_irq.h>
32#include <linux/of_platform.h>
33#include <linux/platform_device.h>
34#include <linux/serial.h>
35#include <linux/serial_core.h>
36#include <linux/slab.h>
37#include <linux/tty.h>
38#include <linux/tty_flip.h>
39
40/* Register Map */
41#define UART_RBR 0x00
42#define RBR_BRK_DET BIT(15)
43#define RBR_FRM_ERR_DET BIT(14)
44#define RBR_PAR_ERR_DET BIT(13)
45#define RBR_OVR_ERR_DET BIT(12)
46
47#define UART_TSH 0x04
48
49#define UART_CTRL 0x08
50#define CTRL_SOFT_RST BIT(31)
51#define CTRL_TXFIFO_RST BIT(15)
52#define CTRL_RXFIFO_RST BIT(14)
53#define CTRL_ST_MIRR_EN BIT(13)
54#define CTRL_LPBK_EN BIT(12)
55#define CTRL_SND_BRK_SEQ BIT(11)
56#define CTRL_PAR_EN BIT(10)
57#define CTRL_TWO_STOP BIT(9)
58#define CTRL_TX_HFL_INT BIT(8)
59#define CTRL_RX_HFL_INT BIT(7)
60#define CTRL_TX_EMP_INT BIT(6)
61#define CTRL_TX_RDY_INT BIT(5)
62#define CTRL_RX_RDY_INT BIT(4)
63#define CTRL_BRK_DET_INT BIT(3)
64#define CTRL_FRM_ERR_INT BIT(2)
65#define CTRL_PAR_ERR_INT BIT(1)
66#define CTRL_OVR_ERR_INT BIT(0)
67#define CTRL_RX_INT (CTRL_RX_RDY_INT | CTRL_BRK_DET_INT |\
68 CTRL_FRM_ERR_INT | CTRL_PAR_ERR_INT | CTRL_OVR_ERR_INT)
69
70#define UART_STAT 0x0c
71#define STAT_TX_FIFO_EMP BIT(13)
72#define STAT_RX_FIFO_EMP BIT(12)
73#define STAT_TX_FIFO_FUL BIT(11)
74#define STAT_TX_FIFO_HFL BIT(10)
75#define STAT_RX_TOGL BIT(9)
76#define STAT_RX_FIFO_FUL BIT(8)
77#define STAT_RX_FIFO_HFL BIT(7)
78#define STAT_TX_EMP BIT(6)
79#define STAT_TX_RDY BIT(5)
80#define STAT_RX_RDY BIT(4)
81#define STAT_BRK_DET BIT(3)
82#define STAT_FRM_ERR BIT(2)
83#define STAT_PAR_ERR BIT(1)
84#define STAT_OVR_ERR BIT(0)
85#define STAT_BRK_ERR (STAT_BRK_DET | STAT_FRM_ERR | STAT_FRM_ERR\
86 | STAT_PAR_ERR | STAT_OVR_ERR)
87
88#define UART_BRDV 0x10
89
90#define MVEBU_NR_UARTS 1
91
92#define MVEBU_UART_TYPE "mvebu-uart"
93
94static struct uart_port mvebu_uart_ports[MVEBU_NR_UARTS];
95
96struct mvebu_uart_data {
97 struct uart_port *port;
98 struct clk *clk;
99};
100
101/* Core UART Driver Operations */
102static unsigned int mvebu_uart_tx_empty(struct uart_port *port)
103{
104 unsigned long flags;
105 unsigned int st;
106
107 spin_lock_irqsave(&port->lock, flags);
108 st = readl(port->membase + UART_STAT);
109 spin_unlock_irqrestore(&port->lock, flags);
110
111 return (st & STAT_TX_FIFO_EMP) ? TIOCSER_TEMT : 0;
112}
113
114static unsigned int mvebu_uart_get_mctrl(struct uart_port *port)
115{
116 return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
117}
118
119static void mvebu_uart_set_mctrl(struct uart_port *port,
120 unsigned int mctrl)
121{
122/*
123 * Even if we do not support configuring the modem control lines, this
124 * function must be proided to the serial core
125 */
126}
127
128static void mvebu_uart_stop_tx(struct uart_port *port)
129{
130 unsigned int ctl = readl(port->membase + UART_CTRL);
131
132 ctl &= ~CTRL_TX_RDY_INT;
133 writel(ctl, port->membase + UART_CTRL);
134}
135
136static void mvebu_uart_start_tx(struct uart_port *port)
137{
138 unsigned int ctl = readl(port->membase + UART_CTRL);
139
140 ctl |= CTRL_TX_RDY_INT;
141 writel(ctl, port->membase + UART_CTRL);
142}
143
144static void mvebu_uart_stop_rx(struct uart_port *port)
145{
146 unsigned int ctl = readl(port->membase + UART_CTRL);
147
148 ctl &= ~CTRL_RX_INT;
149 writel(ctl, port->membase + UART_CTRL);
150}
151
152static void mvebu_uart_break_ctl(struct uart_port *port, int brk)
153{
154 unsigned int ctl;
155 unsigned long flags;
156
157 spin_lock_irqsave(&port->lock, flags);
158 ctl = readl(port->membase + UART_CTRL);
159 if (brk == -1)
160 ctl |= CTRL_SND_BRK_SEQ;
161 else
162 ctl &= ~CTRL_SND_BRK_SEQ;
163 writel(ctl, port->membase + UART_CTRL);
164 spin_unlock_irqrestore(&port->lock, flags);
165}
166
167static void mvebu_uart_rx_chars(struct uart_port *port, unsigned int status)
168{
169 struct tty_port *tport = &port->state->port;
170 unsigned char ch = 0;
171 char flag = 0;
172
173 do {
174 if (status & STAT_RX_RDY) {
175 ch = readl(port->membase + UART_RBR);
176 ch &= 0xff;
177 flag = TTY_NORMAL;
178 port->icount.rx++;
179
180 if (status & STAT_PAR_ERR)
181 port->icount.parity++;
182 }
183
184 if (status & STAT_BRK_DET) {
185 port->icount.brk++;
186 status &= ~(STAT_FRM_ERR | STAT_PAR_ERR);
187 if (uart_handle_break(port))
188 goto ignore_char;
189 }
190
191 if (status & STAT_OVR_ERR)
192 port->icount.overrun++;
193
194 if (status & STAT_FRM_ERR)
195 port->icount.frame++;
196
197 if (uart_handle_sysrq_char(port, ch))
198 goto ignore_char;
199
200 if (status & port->ignore_status_mask & STAT_PAR_ERR)
201 status &= ~STAT_RX_RDY;
202
203 status &= port->read_status_mask;
204
205 if (status & STAT_PAR_ERR)
206 flag = TTY_PARITY;
207
208 status &= ~port->ignore_status_mask;
209
210 if (status & STAT_RX_RDY)
211 tty_insert_flip_char(tport, ch, flag);
212
213 if (status & STAT_BRK_DET)
214 tty_insert_flip_char(tport, 0, TTY_BREAK);
215
216 if (status & STAT_FRM_ERR)
217 tty_insert_flip_char(tport, 0, TTY_FRAME);
218
219 if (status & STAT_OVR_ERR)
220 tty_insert_flip_char(tport, 0, TTY_OVERRUN);
221
222ignore_char:
223 status = readl(port->membase + UART_STAT);
224 } while (status & (STAT_RX_RDY | STAT_BRK_DET));
225
226 tty_flip_buffer_push(tport);
227}
228
229static void mvebu_uart_tx_chars(struct uart_port *port, unsigned int status)
230{
231 struct circ_buf *xmit = &port->state->xmit;
232 unsigned int count;
233 unsigned int st;
234
235 if (port->x_char) {
236 writel(port->x_char, port->membase + UART_TSH);
237 port->icount.tx++;
238 port->x_char = 0;
239 return;
240 }
241
242 if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
243 mvebu_uart_stop_tx(port);
244 return;
245 }
246
247 for (count = 0; count < port->fifosize; count++) {
248 writel(xmit->buf[xmit->tail], port->membase + UART_TSH);
249 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
250 port->icount.tx++;
251
252 if (uart_circ_empty(xmit))
253 break;
254
255 st = readl(port->membase + UART_STAT);
256 if (st & STAT_TX_FIFO_FUL)
257 break;
258 }
259
260 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
261 uart_write_wakeup(port);
262
263 if (uart_circ_empty(xmit))
264 mvebu_uart_stop_tx(port);
265}
266
267static irqreturn_t mvebu_uart_isr(int irq, void *dev_id)
268{
269 struct uart_port *port = (struct uart_port *)dev_id;
270 unsigned int st = readl(port->membase + UART_STAT);
271
272 if (st & (STAT_RX_RDY | STAT_OVR_ERR | STAT_FRM_ERR | STAT_BRK_DET))
273 mvebu_uart_rx_chars(port, st);
274
275 if (st & STAT_TX_RDY)
276 mvebu_uart_tx_chars(port, st);
277
278 return IRQ_HANDLED;
279}
280
281static int mvebu_uart_startup(struct uart_port *port)
282{
283 int ret;
284
285 writel(CTRL_TXFIFO_RST | CTRL_RXFIFO_RST,
286 port->membase + UART_CTRL);
287 udelay(1);
288 writel(CTRL_RX_INT, port->membase + UART_CTRL);
289
290 ret = request_irq(port->irq, mvebu_uart_isr, port->irqflags, "serial",
291 port);
292 if (ret) {
293 dev_err(port->dev, "failed to request irq\n");
294 return ret;
295 }
296
297 return 0;
298}
299
300static void mvebu_uart_shutdown(struct uart_port *port)
301{
302 writel(0, port->membase + UART_CTRL);
Thomas Petazzonic2c16592016-06-16 16:48:52 +0200303
304 free_irq(port->irq, port);
Wilson Ding30530792016-02-16 19:14:53 +0100305}
306
307static void mvebu_uart_set_termios(struct uart_port *port,
308 struct ktermios *termios,
309 struct ktermios *old)
310{
311 unsigned long flags;
312 unsigned int baud;
313
314 spin_lock_irqsave(&port->lock, flags);
315
316 port->read_status_mask = STAT_RX_RDY | STAT_OVR_ERR |
317 STAT_TX_RDY | STAT_TX_FIFO_FUL;
318
319 if (termios->c_iflag & INPCK)
320 port->read_status_mask |= STAT_FRM_ERR | STAT_PAR_ERR;
321
322 port->ignore_status_mask = 0;
323 if (termios->c_iflag & IGNPAR)
324 port->ignore_status_mask |=
325 STAT_FRM_ERR | STAT_PAR_ERR | STAT_OVR_ERR;
326
327 if ((termios->c_cflag & CREAD) == 0)
328 port->ignore_status_mask |= STAT_RX_RDY | STAT_BRK_ERR;
329
330 if (old)
331 tty_termios_copy_hw(termios, old);
332
333 baud = uart_get_baud_rate(port, termios, old, 0, 460800);
334 uart_update_timeout(port, termios->c_cflag, baud);
335
336 spin_unlock_irqrestore(&port->lock, flags);
337}
338
339static const char *mvebu_uart_type(struct uart_port *port)
340{
341 return MVEBU_UART_TYPE;
342}
343
344static void mvebu_uart_release_port(struct uart_port *port)
345{
346 /* Nothing to do here */
347}
348
349static int mvebu_uart_request_port(struct uart_port *port)
350{
351 return 0;
352}
353
354#ifdef CONFIG_CONSOLE_POLL
355static int mvebu_uart_get_poll_char(struct uart_port *port)
356{
357 unsigned int st = readl(port->membase + UART_STAT);
358
359 if (!(st & STAT_RX_RDY))
360 return NO_POLL_CHAR;
361
362 return readl(port->membase + UART_RBR);
363}
364
365static void mvebu_uart_put_poll_char(struct uart_port *port, unsigned char c)
366{
367 unsigned int st;
368
369 for (;;) {
370 st = readl(port->membase + UART_STAT);
371
372 if (!(st & STAT_TX_FIFO_FUL))
373 break;
374
375 udelay(1);
376 }
377
378 writel(c, port->membase + UART_TSH);
379}
380#endif
381
382static const struct uart_ops mvebu_uart_ops = {
383 .tx_empty = mvebu_uart_tx_empty,
384 .set_mctrl = mvebu_uart_set_mctrl,
385 .get_mctrl = mvebu_uart_get_mctrl,
386 .stop_tx = mvebu_uart_stop_tx,
387 .start_tx = mvebu_uart_start_tx,
388 .stop_rx = mvebu_uart_stop_rx,
389 .break_ctl = mvebu_uart_break_ctl,
390 .startup = mvebu_uart_startup,
391 .shutdown = mvebu_uart_shutdown,
392 .set_termios = mvebu_uart_set_termios,
393 .type = mvebu_uart_type,
394 .release_port = mvebu_uart_release_port,
395 .request_port = mvebu_uart_request_port,
396#ifdef CONFIG_CONSOLE_POLL
397 .poll_get_char = mvebu_uart_get_poll_char,
398 .poll_put_char = mvebu_uart_put_poll_char,
399#endif
400};
401
402/* Console Driver Operations */
403
404#ifdef CONFIG_SERIAL_MVEBU_CONSOLE
405/* Early Console */
406static void mvebu_uart_putc(struct uart_port *port, int c)
407{
408 unsigned int st;
409
410 for (;;) {
411 st = readl(port->membase + UART_STAT);
412 if (!(st & STAT_TX_FIFO_FUL))
413 break;
414 }
415
416 writel(c, port->membase + UART_TSH);
417
418 for (;;) {
419 st = readl(port->membase + UART_STAT);
420 if (st & STAT_TX_FIFO_EMP)
421 break;
422 }
423}
424
425static void mvebu_uart_putc_early_write(struct console *con,
426 const char *s,
427 unsigned n)
428{
429 struct earlycon_device *dev = con->data;
430
431 uart_console_write(&dev->port, s, n, mvebu_uart_putc);
432}
433
434static int __init
435mvebu_uart_early_console_setup(struct earlycon_device *device,
436 const char *opt)
437{
438 if (!device->port.membase)
439 return -ENODEV;
440
441 device->con->write = mvebu_uart_putc_early_write;
442
443 return 0;
444}
445
446EARLYCON_DECLARE(ar3700_uart, mvebu_uart_early_console_setup);
447OF_EARLYCON_DECLARE(ar3700_uart, "marvell,armada-3700-uart",
448 mvebu_uart_early_console_setup);
449
450static void wait_for_xmitr(struct uart_port *port)
451{
452 u32 val;
453
454 readl_poll_timeout_atomic(port->membase + UART_STAT, val,
455 (val & STAT_TX_EMP), 1, 10000);
456}
457
458static void mvebu_uart_console_putchar(struct uart_port *port, int ch)
459{
460 wait_for_xmitr(port);
461 writel(ch, port->membase + UART_TSH);
462}
463
464static void mvebu_uart_console_write(struct console *co, const char *s,
465 unsigned int count)
466{
467 struct uart_port *port = &mvebu_uart_ports[co->index];
468 unsigned long flags;
469 unsigned int ier;
470 int locked = 1;
471
472 if (oops_in_progress)
473 locked = spin_trylock_irqsave(&port->lock, flags);
474 else
475 spin_lock_irqsave(&port->lock, flags);
476
477 ier = readl(port->membase + UART_CTRL) &
478 (CTRL_RX_INT | CTRL_TX_RDY_INT);
479 writel(0, port->membase + UART_CTRL);
480
481 uart_console_write(port, s, count, mvebu_uart_console_putchar);
482
483 wait_for_xmitr(port);
484
485 if (ier)
486 writel(ier, port->membase + UART_CTRL);
487
488 if (locked)
489 spin_unlock_irqrestore(&port->lock, flags);
490}
491
492static int mvebu_uart_console_setup(struct console *co, char *options)
493{
494 struct uart_port *port;
495 int baud = 9600;
496 int bits = 8;
497 int parity = 'n';
498 int flow = 'n';
499
500 if (co->index < 0 || co->index >= MVEBU_NR_UARTS)
501 return -EINVAL;
502
503 port = &mvebu_uart_ports[co->index];
504
505 if (!port->mapbase || !port->membase) {
506 pr_debug("console on ttyMV%i not present\n", co->index);
507 return -ENODEV;
508 }
509
510 if (options)
511 uart_parse_options(options, &baud, &parity, &bits, &flow);
512
513 return uart_set_options(port, co, baud, parity, bits, flow);
514}
515
516static struct uart_driver mvebu_uart_driver;
517
518static struct console mvebu_uart_console = {
519 .name = "ttyMV",
520 .write = mvebu_uart_console_write,
521 .device = uart_console_device,
522 .setup = mvebu_uart_console_setup,
523 .flags = CON_PRINTBUFFER,
524 .index = -1,
525 .data = &mvebu_uart_driver,
526};
527
528static int __init mvebu_uart_console_init(void)
529{
530 register_console(&mvebu_uart_console);
531 return 0;
532}
533
534console_initcall(mvebu_uart_console_init);
535
536
537#endif /* CONFIG_SERIAL_MVEBU_CONSOLE */
538
539static struct uart_driver mvebu_uart_driver = {
540 .owner = THIS_MODULE,
541 .driver_name = "mvebu_serial",
542 .dev_name = "ttyMV",
543 .nr = MVEBU_NR_UARTS,
544#ifdef CONFIG_SERIAL_MVEBU_CONSOLE
545 .cons = &mvebu_uart_console,
546#endif
547};
548
549static int mvebu_uart_probe(struct platform_device *pdev)
550{
551 struct resource *reg = platform_get_resource(pdev, IORESOURCE_MEM, 0);
552 struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
553 struct uart_port *port;
554 struct mvebu_uart_data *data;
555 int ret;
556
557 if (!reg || !irq) {
558 dev_err(&pdev->dev, "no registers/irq defined\n");
559 return -EINVAL;
560 }
561
562 port = &mvebu_uart_ports[0];
563
564 spin_lock_init(&port->lock);
565
566 port->dev = &pdev->dev;
567 port->type = PORT_MVEBU;
568 port->ops = &mvebu_uart_ops;
569 port->regshift = 0;
570
571 port->fifosize = 32;
572 port->iotype = UPIO_MEM32;
573 port->flags = UPF_FIXED_PORT;
574 port->line = 0; /* single port: force line number to 0 */
575
576 port->irq = irq->start;
577 port->irqflags = 0;
578 port->mapbase = reg->start;
579
580 port->membase = devm_ioremap_resource(&pdev->dev, reg);
581 if (IS_ERR(port->membase))
582 return -PTR_ERR(port->membase);
583
584 data = devm_kzalloc(&pdev->dev, sizeof(struct mvebu_uart_data),
585 GFP_KERNEL);
586 if (!data)
587 return -ENOMEM;
588
589 data->port = port;
590
591 port->private_data = data;
592 platform_set_drvdata(pdev, data);
593
594 ret = uart_add_one_port(&mvebu_uart_driver, port);
595 if (ret)
596 return ret;
597 return 0;
598}
599
Wilson Ding30530792016-02-16 19:14:53 +0100600/* Match table for of_platform binding */
601static const struct of_device_id mvebu_uart_of_match[] = {
602 { .compatible = "marvell,armada-3700-uart", },
603 {}
604};
Wilson Ding30530792016-02-16 19:14:53 +0100605
606static struct platform_driver mvebu_uart_platform_driver = {
607 .probe = mvebu_uart_probe,
Wilson Ding30530792016-02-16 19:14:53 +0100608 .driver = {
Wilson Ding30530792016-02-16 19:14:53 +0100609 .name = "mvebu-uart",
610 .of_match_table = of_match_ptr(mvebu_uart_of_match),
Paul Gortmaker89ebc272016-03-13 19:48:52 -0400611 .suppress_bind_attrs = true,
Wilson Ding30530792016-02-16 19:14:53 +0100612 },
613};
614
615static int __init mvebu_uart_init(void)
616{
617 int ret;
618
619 ret = uart_register_driver(&mvebu_uart_driver);
620 if (ret)
621 return ret;
622
623 ret = platform_driver_register(&mvebu_uart_platform_driver);
624 if (ret)
625 uart_unregister_driver(&mvebu_uart_driver);
626
627 return ret;
628}
Wilson Ding30530792016-02-16 19:14:53 +0100629arch_initcall(mvebu_uart_init);