Scott Wood | bf4994d | 2007-10-16 01:28:19 -0700 | [diff] [blame] | 1 | /* |
| 2 | * RTC client/driver for the Maxim/Dallas DS1374 Real-Time Clock over I2C |
| 3 | * |
| 4 | * Based on code by Randy Vinson <rvinson@mvista.com>, |
| 5 | * which was based on the m41t00.c by Mark Greer <mgreer@mvista.com>. |
| 6 | * |
| 7 | * Copyright (C) 2006-2007 Freescale Semiconductor |
| 8 | * |
| 9 | * 2005 (c) MontaVista Software, Inc. This file is licensed under |
| 10 | * the terms of the GNU General Public License version 2. This program |
| 11 | * is licensed "as is" without any warranty of any kind, whether express |
| 12 | * or implied. |
| 13 | */ |
| 14 | /* |
| 15 | * It would be more efficient to use i2c msgs/i2c_transfer directly but, as |
| 16 | * recommened in .../Documentation/i2c/writing-clients section |
| 17 | * "Sending and receiving", using SMBus level communication is preferred. |
| 18 | */ |
| 19 | |
| 20 | #include <linux/kernel.h> |
| 21 | #include <linux/module.h> |
| 22 | #include <linux/interrupt.h> |
| 23 | #include <linux/i2c.h> |
| 24 | #include <linux/rtc.h> |
| 25 | #include <linux/bcd.h> |
| 26 | #include <linux/workqueue.h> |
| 27 | |
| 28 | #define DS1374_REG_TOD0 0x00 /* Time of Day */ |
| 29 | #define DS1374_REG_TOD1 0x01 |
| 30 | #define DS1374_REG_TOD2 0x02 |
| 31 | #define DS1374_REG_TOD3 0x03 |
| 32 | #define DS1374_REG_WDALM0 0x04 /* Watchdog/Alarm */ |
| 33 | #define DS1374_REG_WDALM1 0x05 |
| 34 | #define DS1374_REG_WDALM2 0x06 |
| 35 | #define DS1374_REG_CR 0x07 /* Control */ |
| 36 | #define DS1374_REG_CR_AIE 0x01 /* Alarm Int. Enable */ |
| 37 | #define DS1374_REG_CR_WDALM 0x20 /* 1=Watchdog, 0=Alarm */ |
| 38 | #define DS1374_REG_CR_WACE 0x40 /* WD/Alarm counter enable */ |
| 39 | #define DS1374_REG_SR 0x08 /* Status */ |
| 40 | #define DS1374_REG_SR_OSF 0x80 /* Oscillator Stop Flag */ |
| 41 | #define DS1374_REG_SR_AF 0x01 /* Alarm Flag */ |
| 42 | #define DS1374_REG_TCR 0x09 /* Trickle Charge */ |
| 43 | |
Jean Delvare | 3760f73 | 2008-04-29 23:11:40 +0200 | [diff] [blame] | 44 | static const struct i2c_device_id ds1374_id[] = { |
Jean Delvare | f2eb432 | 2008-06-05 22:46:18 -0700 | [diff] [blame] | 45 | { "ds1374", 0 }, |
Jean Delvare | 3760f73 | 2008-04-29 23:11:40 +0200 | [diff] [blame] | 46 | { } |
| 47 | }; |
| 48 | MODULE_DEVICE_TABLE(i2c, ds1374_id); |
| 49 | |
Scott Wood | bf4994d | 2007-10-16 01:28:19 -0700 | [diff] [blame] | 50 | struct ds1374 { |
| 51 | struct i2c_client *client; |
| 52 | struct rtc_device *rtc; |
| 53 | struct work_struct work; |
| 54 | |
| 55 | /* The mutex protects alarm operations, and prevents a race |
| 56 | * between the enable_irq() in the workqueue and the free_irq() |
| 57 | * in the remove function. |
| 58 | */ |
| 59 | struct mutex mutex; |
| 60 | int exiting; |
| 61 | }; |
| 62 | |
| 63 | static struct i2c_driver ds1374_driver; |
| 64 | |
| 65 | static int ds1374_read_rtc(struct i2c_client *client, u32 *time, |
| 66 | int reg, int nbytes) |
| 67 | { |
| 68 | u8 buf[4]; |
| 69 | int ret; |
| 70 | int i; |
| 71 | |
| 72 | if (nbytes > 4) { |
| 73 | WARN_ON(1); |
| 74 | return -EINVAL; |
| 75 | } |
| 76 | |
| 77 | ret = i2c_smbus_read_i2c_block_data(client, reg, nbytes, buf); |
| 78 | |
| 79 | if (ret < 0) |
| 80 | return ret; |
| 81 | if (ret < nbytes) |
| 82 | return -EIO; |
| 83 | |
| 84 | for (i = nbytes - 1, *time = 0; i >= 0; i--) |
| 85 | *time = (*time << 8) | buf[i]; |
| 86 | |
| 87 | return 0; |
| 88 | } |
| 89 | |
| 90 | static int ds1374_write_rtc(struct i2c_client *client, u32 time, |
| 91 | int reg, int nbytes) |
| 92 | { |
| 93 | u8 buf[4]; |
| 94 | int i; |
| 95 | |
| 96 | if (nbytes > 4) { |
| 97 | WARN_ON(1); |
| 98 | return -EINVAL; |
| 99 | } |
| 100 | |
| 101 | for (i = 0; i < nbytes; i++) { |
| 102 | buf[i] = time & 0xff; |
| 103 | time >>= 8; |
| 104 | } |
| 105 | |
| 106 | return i2c_smbus_write_i2c_block_data(client, reg, nbytes, buf); |
| 107 | } |
| 108 | |
| 109 | static int ds1374_check_rtc_status(struct i2c_client *client) |
| 110 | { |
| 111 | int ret = 0; |
| 112 | int control, stat; |
| 113 | |
| 114 | stat = i2c_smbus_read_byte_data(client, DS1374_REG_SR); |
| 115 | if (stat < 0) |
| 116 | return stat; |
| 117 | |
| 118 | if (stat & DS1374_REG_SR_OSF) |
| 119 | dev_warn(&client->dev, |
| 120 | "oscillator discontinuity flagged, " |
| 121 | "time unreliable\n"); |
| 122 | |
| 123 | stat &= ~(DS1374_REG_SR_OSF | DS1374_REG_SR_AF); |
| 124 | |
| 125 | ret = i2c_smbus_write_byte_data(client, DS1374_REG_SR, stat); |
| 126 | if (ret < 0) |
| 127 | return ret; |
| 128 | |
| 129 | /* If the alarm is pending, clear it before requesting |
| 130 | * the interrupt, so an interrupt event isn't reported |
| 131 | * before everything is initialized. |
| 132 | */ |
| 133 | |
| 134 | control = i2c_smbus_read_byte_data(client, DS1374_REG_CR); |
| 135 | if (control < 0) |
| 136 | return control; |
| 137 | |
| 138 | control &= ~(DS1374_REG_CR_WACE | DS1374_REG_CR_AIE); |
| 139 | return i2c_smbus_write_byte_data(client, DS1374_REG_CR, control); |
| 140 | } |
| 141 | |
| 142 | static int ds1374_read_time(struct device *dev, struct rtc_time *time) |
| 143 | { |
| 144 | struct i2c_client *client = to_i2c_client(dev); |
| 145 | u32 itime; |
| 146 | int ret; |
| 147 | |
| 148 | ret = ds1374_read_rtc(client, &itime, DS1374_REG_TOD0, 4); |
| 149 | if (!ret) |
| 150 | rtc_time_to_tm(itime, time); |
| 151 | |
| 152 | return ret; |
| 153 | } |
| 154 | |
| 155 | static int ds1374_set_time(struct device *dev, struct rtc_time *time) |
| 156 | { |
| 157 | struct i2c_client *client = to_i2c_client(dev); |
| 158 | unsigned long itime; |
| 159 | |
| 160 | rtc_tm_to_time(time, &itime); |
| 161 | return ds1374_write_rtc(client, itime, DS1374_REG_TOD0, 4); |
| 162 | } |
| 163 | |
| 164 | /* The ds1374 has a decrementer for an alarm, rather than a comparator. |
| 165 | * If the time of day is changed, then the alarm will need to be |
| 166 | * reset. |
| 167 | */ |
| 168 | static int ds1374_read_alarm(struct device *dev, struct rtc_wkalrm *alarm) |
| 169 | { |
| 170 | struct i2c_client *client = to_i2c_client(dev); |
| 171 | struct ds1374 *ds1374 = i2c_get_clientdata(client); |
| 172 | u32 now, cur_alarm; |
| 173 | int cr, sr; |
| 174 | int ret = 0; |
| 175 | |
Anton Vorontsov | b42f931 | 2008-08-20 14:09:21 -0700 | [diff] [blame] | 176 | if (client->irq <= 0) |
Scott Wood | bf4994d | 2007-10-16 01:28:19 -0700 | [diff] [blame] | 177 | return -EINVAL; |
| 178 | |
| 179 | mutex_lock(&ds1374->mutex); |
| 180 | |
| 181 | cr = ret = i2c_smbus_read_byte_data(client, DS1374_REG_CR); |
| 182 | if (ret < 0) |
| 183 | goto out; |
| 184 | |
| 185 | sr = ret = i2c_smbus_read_byte_data(client, DS1374_REG_SR); |
| 186 | if (ret < 0) |
| 187 | goto out; |
| 188 | |
| 189 | ret = ds1374_read_rtc(client, &now, DS1374_REG_TOD0, 4); |
| 190 | if (ret) |
| 191 | goto out; |
| 192 | |
| 193 | ret = ds1374_read_rtc(client, &cur_alarm, DS1374_REG_WDALM0, 3); |
| 194 | if (ret) |
| 195 | goto out; |
| 196 | |
| 197 | rtc_time_to_tm(now + cur_alarm, &alarm->time); |
| 198 | alarm->enabled = !!(cr & DS1374_REG_CR_WACE); |
| 199 | alarm->pending = !!(sr & DS1374_REG_SR_AF); |
| 200 | |
| 201 | out: |
| 202 | mutex_unlock(&ds1374->mutex); |
| 203 | return ret; |
| 204 | } |
| 205 | |
| 206 | static int ds1374_set_alarm(struct device *dev, struct rtc_wkalrm *alarm) |
| 207 | { |
| 208 | struct i2c_client *client = to_i2c_client(dev); |
| 209 | struct ds1374 *ds1374 = i2c_get_clientdata(client); |
| 210 | struct rtc_time now; |
| 211 | unsigned long new_alarm, itime; |
| 212 | int cr; |
| 213 | int ret = 0; |
| 214 | |
Anton Vorontsov | b42f931 | 2008-08-20 14:09:21 -0700 | [diff] [blame] | 215 | if (client->irq <= 0) |
Scott Wood | bf4994d | 2007-10-16 01:28:19 -0700 | [diff] [blame] | 216 | return -EINVAL; |
| 217 | |
| 218 | ret = ds1374_read_time(dev, &now); |
| 219 | if (ret < 0) |
| 220 | return ret; |
| 221 | |
| 222 | rtc_tm_to_time(&alarm->time, &new_alarm); |
| 223 | rtc_tm_to_time(&now, &itime); |
| 224 | |
| 225 | new_alarm -= itime; |
| 226 | |
| 227 | /* This can happen due to races, in addition to dates that are |
| 228 | * truly in the past. To avoid requiring the caller to check for |
| 229 | * races, dates in the past are assumed to be in the recent past |
| 230 | * (i.e. not something that we'd rather the caller know about via |
| 231 | * an error), and the alarm is set to go off as soon as possible. |
| 232 | */ |
| 233 | if (new_alarm <= 0) |
| 234 | new_alarm = 1; |
| 235 | |
| 236 | mutex_lock(&ds1374->mutex); |
| 237 | |
| 238 | ret = cr = i2c_smbus_read_byte_data(client, DS1374_REG_CR); |
| 239 | if (ret < 0) |
| 240 | goto out; |
| 241 | |
| 242 | /* Disable any existing alarm before setting the new one |
| 243 | * (or lack thereof). */ |
| 244 | cr &= ~DS1374_REG_CR_WACE; |
| 245 | |
| 246 | ret = i2c_smbus_write_byte_data(client, DS1374_REG_CR, cr); |
| 247 | if (ret < 0) |
| 248 | goto out; |
| 249 | |
| 250 | ret = ds1374_write_rtc(client, new_alarm, DS1374_REG_WDALM0, 3); |
| 251 | if (ret) |
| 252 | goto out; |
| 253 | |
| 254 | if (alarm->enabled) { |
| 255 | cr |= DS1374_REG_CR_WACE | DS1374_REG_CR_AIE; |
| 256 | cr &= ~DS1374_REG_CR_WDALM; |
| 257 | |
| 258 | ret = i2c_smbus_write_byte_data(client, DS1374_REG_CR, cr); |
| 259 | } |
| 260 | |
| 261 | out: |
| 262 | mutex_unlock(&ds1374->mutex); |
| 263 | return ret; |
| 264 | } |
| 265 | |
| 266 | static irqreturn_t ds1374_irq(int irq, void *dev_id) |
| 267 | { |
| 268 | struct i2c_client *client = dev_id; |
| 269 | struct ds1374 *ds1374 = i2c_get_clientdata(client); |
| 270 | |
| 271 | disable_irq_nosync(irq); |
| 272 | schedule_work(&ds1374->work); |
| 273 | return IRQ_HANDLED; |
| 274 | } |
| 275 | |
| 276 | static void ds1374_work(struct work_struct *work) |
| 277 | { |
| 278 | struct ds1374 *ds1374 = container_of(work, struct ds1374, work); |
| 279 | struct i2c_client *client = ds1374->client; |
| 280 | int stat, control; |
| 281 | |
| 282 | mutex_lock(&ds1374->mutex); |
| 283 | |
| 284 | stat = i2c_smbus_read_byte_data(client, DS1374_REG_SR); |
| 285 | if (stat < 0) |
| 286 | return; |
| 287 | |
| 288 | if (stat & DS1374_REG_SR_AF) { |
| 289 | stat &= ~DS1374_REG_SR_AF; |
| 290 | i2c_smbus_write_byte_data(client, DS1374_REG_SR, stat); |
| 291 | |
| 292 | control = i2c_smbus_read_byte_data(client, DS1374_REG_CR); |
| 293 | if (control < 0) |
| 294 | goto out; |
| 295 | |
| 296 | control &= ~(DS1374_REG_CR_WACE | DS1374_REG_CR_AIE); |
| 297 | i2c_smbus_write_byte_data(client, DS1374_REG_CR, control); |
| 298 | |
| 299 | /* rtc_update_irq() assumes that it is called |
| 300 | * from IRQ-disabled context. |
| 301 | */ |
| 302 | local_irq_disable(); |
| 303 | rtc_update_irq(ds1374->rtc, 1, RTC_AF | RTC_IRQF); |
| 304 | local_irq_enable(); |
| 305 | } |
| 306 | |
| 307 | out: |
| 308 | if (!ds1374->exiting) |
| 309 | enable_irq(client->irq); |
| 310 | |
| 311 | mutex_unlock(&ds1374->mutex); |
| 312 | } |
| 313 | |
| 314 | static int ds1374_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) |
| 315 | { |
| 316 | struct i2c_client *client = to_i2c_client(dev); |
| 317 | struct ds1374 *ds1374 = i2c_get_clientdata(client); |
| 318 | int ret = -ENOIOCTLCMD; |
| 319 | |
| 320 | mutex_lock(&ds1374->mutex); |
| 321 | |
| 322 | switch (cmd) { |
| 323 | case RTC_AIE_OFF: |
| 324 | ret = i2c_smbus_read_byte_data(client, DS1374_REG_CR); |
| 325 | if (ret < 0) |
| 326 | goto out; |
| 327 | |
| 328 | ret &= ~DS1374_REG_CR_WACE; |
| 329 | |
| 330 | ret = i2c_smbus_write_byte_data(client, DS1374_REG_CR, ret); |
| 331 | if (ret < 0) |
| 332 | goto out; |
| 333 | |
| 334 | break; |
| 335 | |
| 336 | case RTC_AIE_ON: |
| 337 | ret = i2c_smbus_read_byte_data(client, DS1374_REG_CR); |
| 338 | if (ret < 0) |
| 339 | goto out; |
| 340 | |
| 341 | ret |= DS1374_REG_CR_WACE | DS1374_REG_CR_AIE; |
| 342 | ret &= ~DS1374_REG_CR_WDALM; |
| 343 | |
| 344 | ret = i2c_smbus_write_byte_data(client, DS1374_REG_CR, ret); |
| 345 | if (ret < 0) |
| 346 | goto out; |
| 347 | |
| 348 | break; |
| 349 | } |
| 350 | |
| 351 | out: |
| 352 | mutex_unlock(&ds1374->mutex); |
| 353 | return ret; |
| 354 | } |
| 355 | |
| 356 | static const struct rtc_class_ops ds1374_rtc_ops = { |
| 357 | .read_time = ds1374_read_time, |
| 358 | .set_time = ds1374_set_time, |
| 359 | .read_alarm = ds1374_read_alarm, |
| 360 | .set_alarm = ds1374_set_alarm, |
| 361 | .ioctl = ds1374_ioctl, |
| 362 | }; |
| 363 | |
Jean Delvare | d2653e9 | 2008-04-29 23:11:39 +0200 | [diff] [blame] | 364 | static int ds1374_probe(struct i2c_client *client, |
| 365 | const struct i2c_device_id *id) |
Scott Wood | bf4994d | 2007-10-16 01:28:19 -0700 | [diff] [blame] | 366 | { |
| 367 | struct ds1374 *ds1374; |
| 368 | int ret; |
| 369 | |
| 370 | ds1374 = kzalloc(sizeof(struct ds1374), GFP_KERNEL); |
| 371 | if (!ds1374) |
| 372 | return -ENOMEM; |
| 373 | |
| 374 | ds1374->client = client; |
| 375 | i2c_set_clientdata(client, ds1374); |
| 376 | |
| 377 | INIT_WORK(&ds1374->work, ds1374_work); |
| 378 | mutex_init(&ds1374->mutex); |
| 379 | |
| 380 | ret = ds1374_check_rtc_status(client); |
| 381 | if (ret) |
| 382 | goto out_free; |
| 383 | |
Anton Vorontsov | b42f931 | 2008-08-20 14:09:21 -0700 | [diff] [blame] | 384 | if (client->irq > 0) { |
Scott Wood | bf4994d | 2007-10-16 01:28:19 -0700 | [diff] [blame] | 385 | ret = request_irq(client->irq, ds1374_irq, 0, |
| 386 | "ds1374", client); |
| 387 | if (ret) { |
| 388 | dev_err(&client->dev, "unable to request IRQ\n"); |
| 389 | goto out_free; |
| 390 | } |
| 391 | } |
| 392 | |
| 393 | ds1374->rtc = rtc_device_register(client->name, &client->dev, |
| 394 | &ds1374_rtc_ops, THIS_MODULE); |
| 395 | if (IS_ERR(ds1374->rtc)) { |
| 396 | ret = PTR_ERR(ds1374->rtc); |
| 397 | dev_err(&client->dev, "unable to register the class device\n"); |
| 398 | goto out_irq; |
| 399 | } |
| 400 | |
| 401 | return 0; |
| 402 | |
| 403 | out_irq: |
Anton Vorontsov | b42f931 | 2008-08-20 14:09:21 -0700 | [diff] [blame] | 404 | if (client->irq > 0) |
Scott Wood | bf4994d | 2007-10-16 01:28:19 -0700 | [diff] [blame] | 405 | free_irq(client->irq, client); |
| 406 | |
| 407 | out_free: |
| 408 | i2c_set_clientdata(client, NULL); |
| 409 | kfree(ds1374); |
| 410 | return ret; |
| 411 | } |
| 412 | |
| 413 | static int __devexit ds1374_remove(struct i2c_client *client) |
| 414 | { |
| 415 | struct ds1374 *ds1374 = i2c_get_clientdata(client); |
| 416 | |
Anton Vorontsov | b42f931 | 2008-08-20 14:09:21 -0700 | [diff] [blame] | 417 | if (client->irq > 0) { |
Scott Wood | bf4994d | 2007-10-16 01:28:19 -0700 | [diff] [blame] | 418 | mutex_lock(&ds1374->mutex); |
| 419 | ds1374->exiting = 1; |
| 420 | mutex_unlock(&ds1374->mutex); |
| 421 | |
| 422 | free_irq(client->irq, client); |
| 423 | flush_scheduled_work(); |
| 424 | } |
| 425 | |
| 426 | rtc_device_unregister(ds1374->rtc); |
| 427 | i2c_set_clientdata(client, NULL); |
| 428 | kfree(ds1374); |
| 429 | return 0; |
| 430 | } |
| 431 | |
Marc Pignat | 986e36a | 2008-10-15 22:02:56 -0700 | [diff] [blame] | 432 | #ifdef CONFIG_PM |
| 433 | static int ds1374_suspend(struct i2c_client *client, pm_message_t state) |
| 434 | { |
| 435 | if (client->irq >= 0 && device_may_wakeup(&client->dev)) |
| 436 | enable_irq_wake(client->irq); |
| 437 | return 0; |
| 438 | } |
| 439 | |
| 440 | static int ds1374_resume(struct i2c_client *client) |
| 441 | { |
| 442 | if (client->irq >= 0 && device_may_wakeup(&client->dev)) |
| 443 | disable_irq_wake(client->irq); |
| 444 | return 0; |
| 445 | } |
| 446 | #else |
| 447 | #define ds1374_suspend NULL |
| 448 | #define ds1374_resume NULL |
| 449 | #endif |
| 450 | |
Scott Wood | bf4994d | 2007-10-16 01:28:19 -0700 | [diff] [blame] | 451 | static struct i2c_driver ds1374_driver = { |
| 452 | .driver = { |
| 453 | .name = "rtc-ds1374", |
| 454 | .owner = THIS_MODULE, |
| 455 | }, |
| 456 | .probe = ds1374_probe, |
Marc Pignat | 986e36a | 2008-10-15 22:02:56 -0700 | [diff] [blame] | 457 | .suspend = ds1374_suspend, |
| 458 | .resume = ds1374_resume, |
Scott Wood | bf4994d | 2007-10-16 01:28:19 -0700 | [diff] [blame] | 459 | .remove = __devexit_p(ds1374_remove), |
Jean Delvare | 3760f73 | 2008-04-29 23:11:40 +0200 | [diff] [blame] | 460 | .id_table = ds1374_id, |
Scott Wood | bf4994d | 2007-10-16 01:28:19 -0700 | [diff] [blame] | 461 | }; |
| 462 | |
| 463 | static int __init ds1374_init(void) |
| 464 | { |
| 465 | return i2c_add_driver(&ds1374_driver); |
| 466 | } |
| 467 | |
| 468 | static void __exit ds1374_exit(void) |
| 469 | { |
| 470 | i2c_del_driver(&ds1374_driver); |
| 471 | } |
| 472 | |
| 473 | module_init(ds1374_init); |
| 474 | module_exit(ds1374_exit); |
| 475 | |
| 476 | MODULE_AUTHOR("Scott Wood <scottwood@freescale.com>"); |
| 477 | MODULE_DESCRIPTION("Maxim/Dallas DS1374 RTC Driver"); |
| 478 | MODULE_LICENSE("GPL"); |