blob: fcfe82653ac8d1edd73f208faf616446bb2a5e9c [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
4 * for more details.
5 *
Pat Gefre64b91372006-03-25 03:08:07 -08006 * Copyright (C) 2003-2006 Silicon Graphics, Inc. All Rights Reserved.
Linus Torvalds1da177e2005-04-16 15:20:36 -07007 */
8
9
10/*
11 * This file contains a module version of the ioc4 serial driver. This
12 * includes all the support functions needed (support functions, etc.)
13 * and the serial driver itself.
14 */
15#include <linux/errno.h>
16#include <linux/tty.h>
17#include <linux/serial.h>
18#include <linux/serialP.h>
19#include <linux/circ_buf.h>
20#include <linux/serial_reg.h>
21#include <linux/module.h>
22#include <linux/pci.h>
Brent Casavant22329b52005-06-21 17:15:59 -070023#include <linux/ioc4.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070024#include <linux/serial_core.h>
Tejun Heo5a0e3ad2010-03-24 17:04:11 +090025#include <linux/slab.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070026
27/*
28 * interesting things about the ioc4
29 */
30
31#define IOC4_NUM_SERIAL_PORTS 4 /* max ports per card */
32#define IOC4_NUM_CARDS 8 /* max cards per partition */
33
34#define GET_SIO_IR(_n) (_n == 0) ? (IOC4_SIO_IR_S0) : \
35 (_n == 1) ? (IOC4_SIO_IR_S1) : \
36 (_n == 2) ? (IOC4_SIO_IR_S2) : \
37 (IOC4_SIO_IR_S3)
38
39#define GET_OTHER_IR(_n) (_n == 0) ? (IOC4_OTHER_IR_S0_MEMERR) : \
40 (_n == 1) ? (IOC4_OTHER_IR_S1_MEMERR) : \
41 (_n == 2) ? (IOC4_OTHER_IR_S2_MEMERR) : \
42 (IOC4_OTHER_IR_S3_MEMERR)
43
44
45/*
46 * All IOC4 registers are 32 bits wide.
47 */
48
49/*
50 * PCI Memory Space Map
51 */
52#define IOC4_PCI_ERR_ADDR_L 0x000 /* Low Error Address */
53#define IOC4_PCI_ERR_ADDR_VLD (0x1 << 0)
54#define IOC4_PCI_ERR_ADDR_MST_ID_MSK (0xf << 1)
55#define IOC4_PCI_ERR_ADDR_MST_NUM_MSK (0xe << 1)
56#define IOC4_PCI_ERR_ADDR_MST_TYP_MSK (0x1 << 1)
57#define IOC4_PCI_ERR_ADDR_MUL_ERR (0x1 << 5)
58#define IOC4_PCI_ERR_ADDR_ADDR_MSK (0x3ffffff << 6)
59
60/* Interrupt types */
61#define IOC4_SIO_INTR_TYPE 0
62#define IOC4_OTHER_INTR_TYPE 1
63#define IOC4_NUM_INTR_TYPES 2
64
65/* Bitmasks for IOC4_SIO_IR, IOC4_SIO_IEC, and IOC4_SIO_IES */
66#define IOC4_SIO_IR_S0_TX_MT 0x00000001 /* Serial port 0 TX empty */
67#define IOC4_SIO_IR_S0_RX_FULL 0x00000002 /* Port 0 RX buf full */
68#define IOC4_SIO_IR_S0_RX_HIGH 0x00000004 /* Port 0 RX hiwat */
69#define IOC4_SIO_IR_S0_RX_TIMER 0x00000008 /* Port 0 RX timeout */
70#define IOC4_SIO_IR_S0_DELTA_DCD 0x00000010 /* Port 0 delta DCD */
71#define IOC4_SIO_IR_S0_DELTA_CTS 0x00000020 /* Port 0 delta CTS */
72#define IOC4_SIO_IR_S0_INT 0x00000040 /* Port 0 pass-thru intr */
73#define IOC4_SIO_IR_S0_TX_EXPLICIT 0x00000080 /* Port 0 explicit TX thru */
74#define IOC4_SIO_IR_S1_TX_MT 0x00000100 /* Serial port 1 */
75#define IOC4_SIO_IR_S1_RX_FULL 0x00000200 /* */
76#define IOC4_SIO_IR_S1_RX_HIGH 0x00000400 /* */
77#define IOC4_SIO_IR_S1_RX_TIMER 0x00000800 /* */
78#define IOC4_SIO_IR_S1_DELTA_DCD 0x00001000 /* */
79#define IOC4_SIO_IR_S1_DELTA_CTS 0x00002000 /* */
80#define IOC4_SIO_IR_S1_INT 0x00004000 /* */
81#define IOC4_SIO_IR_S1_TX_EXPLICIT 0x00008000 /* */
82#define IOC4_SIO_IR_S2_TX_MT 0x00010000 /* Serial port 2 */
83#define IOC4_SIO_IR_S2_RX_FULL 0x00020000 /* */
84#define IOC4_SIO_IR_S2_RX_HIGH 0x00040000 /* */
85#define IOC4_SIO_IR_S2_RX_TIMER 0x00080000 /* */
86#define IOC4_SIO_IR_S2_DELTA_DCD 0x00100000 /* */
87#define IOC4_SIO_IR_S2_DELTA_CTS 0x00200000 /* */
88#define IOC4_SIO_IR_S2_INT 0x00400000 /* */
89#define IOC4_SIO_IR_S2_TX_EXPLICIT 0x00800000 /* */
90#define IOC4_SIO_IR_S3_TX_MT 0x01000000 /* Serial port 3 */
91#define IOC4_SIO_IR_S3_RX_FULL 0x02000000 /* */
92#define IOC4_SIO_IR_S3_RX_HIGH 0x04000000 /* */
93#define IOC4_SIO_IR_S3_RX_TIMER 0x08000000 /* */
94#define IOC4_SIO_IR_S3_DELTA_DCD 0x10000000 /* */
95#define IOC4_SIO_IR_S3_DELTA_CTS 0x20000000 /* */
96#define IOC4_SIO_IR_S3_INT 0x40000000 /* */
97#define IOC4_SIO_IR_S3_TX_EXPLICIT 0x80000000 /* */
98
99/* Per device interrupt masks */
100#define IOC4_SIO_IR_S0 (IOC4_SIO_IR_S0_TX_MT | \
101 IOC4_SIO_IR_S0_RX_FULL | \
102 IOC4_SIO_IR_S0_RX_HIGH | \
103 IOC4_SIO_IR_S0_RX_TIMER | \
104 IOC4_SIO_IR_S0_DELTA_DCD | \
105 IOC4_SIO_IR_S0_DELTA_CTS | \
106 IOC4_SIO_IR_S0_INT | \
107 IOC4_SIO_IR_S0_TX_EXPLICIT)
108#define IOC4_SIO_IR_S1 (IOC4_SIO_IR_S1_TX_MT | \
109 IOC4_SIO_IR_S1_RX_FULL | \
110 IOC4_SIO_IR_S1_RX_HIGH | \
111 IOC4_SIO_IR_S1_RX_TIMER | \
112 IOC4_SIO_IR_S1_DELTA_DCD | \
113 IOC4_SIO_IR_S1_DELTA_CTS | \
114 IOC4_SIO_IR_S1_INT | \
115 IOC4_SIO_IR_S1_TX_EXPLICIT)
116#define IOC4_SIO_IR_S2 (IOC4_SIO_IR_S2_TX_MT | \
117 IOC4_SIO_IR_S2_RX_FULL | \
118 IOC4_SIO_IR_S2_RX_HIGH | \
119 IOC4_SIO_IR_S2_RX_TIMER | \
120 IOC4_SIO_IR_S2_DELTA_DCD | \
121 IOC4_SIO_IR_S2_DELTA_CTS | \
122 IOC4_SIO_IR_S2_INT | \
123 IOC4_SIO_IR_S2_TX_EXPLICIT)
124#define IOC4_SIO_IR_S3 (IOC4_SIO_IR_S3_TX_MT | \
125 IOC4_SIO_IR_S3_RX_FULL | \
126 IOC4_SIO_IR_S3_RX_HIGH | \
127 IOC4_SIO_IR_S3_RX_TIMER | \
128 IOC4_SIO_IR_S3_DELTA_DCD | \
129 IOC4_SIO_IR_S3_DELTA_CTS | \
130 IOC4_SIO_IR_S3_INT | \
131 IOC4_SIO_IR_S3_TX_EXPLICIT)
132
133/* Bitmasks for IOC4_OTHER_IR, IOC4_OTHER_IEC, and IOC4_OTHER_IES */
Brent Casavant22329b52005-06-21 17:15:59 -0700134#define IOC4_OTHER_IR_ATA_INT 0x00000001 /* ATAPI intr pass-thru */
135#define IOC4_OTHER_IR_ATA_MEMERR 0x00000002 /* ATAPI DMA PCI error */
136#define IOC4_OTHER_IR_S0_MEMERR 0x00000004 /* Port 0 PCI error */
137#define IOC4_OTHER_IR_S1_MEMERR 0x00000008 /* Port 1 PCI error */
138#define IOC4_OTHER_IR_S2_MEMERR 0x00000010 /* Port 2 PCI error */
139#define IOC4_OTHER_IR_S3_MEMERR 0x00000020 /* Port 3 PCI error */
140#define IOC4_OTHER_IR_KBD_INT 0x00000040 /* Keyboard/mouse */
141#define IOC4_OTHER_IR_RESERVED 0x007fff80 /* Reserved */
142#define IOC4_OTHER_IR_RT_INT 0x00800000 /* INT_OUT section output */
143#define IOC4_OTHER_IR_GEN_INT 0xff000000 /* Generic pins */
144
145#define IOC4_OTHER_IR_SER_MEMERR (IOC4_OTHER_IR_S0_MEMERR | IOC4_OTHER_IR_S1_MEMERR | \
146 IOC4_OTHER_IR_S2_MEMERR | IOC4_OTHER_IR_S3_MEMERR)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700147
148/* Bitmasks for IOC4_SIO_CR */
149#define IOC4_SIO_CR_CMD_PULSE_SHIFT 0 /* byte bus strobe shift */
150#define IOC4_SIO_CR_ARB_DIAG_TX0 0x00000000
151#define IOC4_SIO_CR_ARB_DIAG_RX0 0x00000010
152#define IOC4_SIO_CR_ARB_DIAG_TX1 0x00000020
153#define IOC4_SIO_CR_ARB_DIAG_RX1 0x00000030
154#define IOC4_SIO_CR_ARB_DIAG_TX2 0x00000040
155#define IOC4_SIO_CR_ARB_DIAG_RX2 0x00000050
156#define IOC4_SIO_CR_ARB_DIAG_TX3 0x00000060
157#define IOC4_SIO_CR_ARB_DIAG_RX3 0x00000070
158#define IOC4_SIO_CR_SIO_DIAG_IDLE 0x00000080 /* 0 -> active request among
159 serial ports (ro) */
160/* Defs for some of the generic I/O pins */
161#define IOC4_GPCR_UART0_MODESEL 0x10 /* Pin is output to port 0
162 mode sel */
163#define IOC4_GPCR_UART1_MODESEL 0x20 /* Pin is output to port 1
164 mode sel */
165#define IOC4_GPCR_UART2_MODESEL 0x40 /* Pin is output to port 2
166 mode sel */
167#define IOC4_GPCR_UART3_MODESEL 0x80 /* Pin is output to port 3
168 mode sel */
169
170#define IOC4_GPPR_UART0_MODESEL_PIN 4 /* GIO pin controlling
171 uart 0 mode select */
172#define IOC4_GPPR_UART1_MODESEL_PIN 5 /* GIO pin controlling
173 uart 1 mode select */
174#define IOC4_GPPR_UART2_MODESEL_PIN 6 /* GIO pin controlling
175 uart 2 mode select */
176#define IOC4_GPPR_UART3_MODESEL_PIN 7 /* GIO pin controlling
177 uart 3 mode select */
178
179/* Bitmasks for serial RX status byte */
180#define IOC4_RXSB_OVERRUN 0x01 /* Char(s) lost */
181#define IOC4_RXSB_PAR_ERR 0x02 /* Parity error */
182#define IOC4_RXSB_FRAME_ERR 0x04 /* Framing error */
183#define IOC4_RXSB_BREAK 0x08 /* Break character */
184#define IOC4_RXSB_CTS 0x10 /* State of CTS */
185#define IOC4_RXSB_DCD 0x20 /* State of DCD */
186#define IOC4_RXSB_MODEM_VALID 0x40 /* DCD, CTS, and OVERRUN are valid */
187#define IOC4_RXSB_DATA_VALID 0x80 /* Data byte, FRAME_ERR PAR_ERR
188 * & BREAK valid */
189
190/* Bitmasks for serial TX control byte */
191#define IOC4_TXCB_INT_WHEN_DONE 0x20 /* Interrupt after this byte is sent */
192#define IOC4_TXCB_INVALID 0x00 /* Byte is invalid */
193#define IOC4_TXCB_VALID 0x40 /* Byte is valid */
194#define IOC4_TXCB_MCR 0x80 /* Data<7:0> to modem control reg */
195#define IOC4_TXCB_DELAY 0xc0 /* Delay data<7:0> mSec */
196
197/* Bitmasks for IOC4_SBBR_L */
198#define IOC4_SBBR_L_SIZE 0x00000001 /* 0 == 1KB rings, 1 == 4KB rings */
199
200/* Bitmasks for IOC4_SSCR_<3:0> */
201#define IOC4_SSCR_RX_THRESHOLD 0x000001ff /* Hiwater mark */
202#define IOC4_SSCR_TX_TIMER_BUSY 0x00010000 /* TX timer in progress */
203#define IOC4_SSCR_HFC_EN 0x00020000 /* Hardware flow control enabled */
204#define IOC4_SSCR_RX_RING_DCD 0x00040000 /* Post RX record on delta-DCD */
205#define IOC4_SSCR_RX_RING_CTS 0x00080000 /* Post RX record on delta-CTS */
206#define IOC4_SSCR_DIAG 0x00200000 /* Bypass clock divider for sim */
207#define IOC4_SSCR_RX_DRAIN 0x08000000 /* Drain RX buffer to memory */
208#define IOC4_SSCR_DMA_EN 0x10000000 /* Enable ring buffer DMA */
209#define IOC4_SSCR_DMA_PAUSE 0x20000000 /* Pause DMA */
210#define IOC4_SSCR_PAUSE_STATE 0x40000000 /* Sets when PAUSE takes effect */
211#define IOC4_SSCR_RESET 0x80000000 /* Reset DMA channels */
212
213/* All producer/comsumer pointers are the same bitfield */
214#define IOC4_PROD_CONS_PTR_4K 0x00000ff8 /* For 4K buffers */
215#define IOC4_PROD_CONS_PTR_1K 0x000003f8 /* For 1K buffers */
216#define IOC4_PROD_CONS_PTR_OFF 3
217
218/* Bitmasks for IOC4_SRCIR_<3:0> */
219#define IOC4_SRCIR_ARM 0x80000000 /* Arm RX timer */
220
221/* Bitmasks for IOC4_SHADOW_<3:0> */
222#define IOC4_SHADOW_DR 0x00000001 /* Data ready */
223#define IOC4_SHADOW_OE 0x00000002 /* Overrun error */
224#define IOC4_SHADOW_PE 0x00000004 /* Parity error */
225#define IOC4_SHADOW_FE 0x00000008 /* Framing error */
226#define IOC4_SHADOW_BI 0x00000010 /* Break interrupt */
227#define IOC4_SHADOW_THRE 0x00000020 /* Xmit holding register empty */
228#define IOC4_SHADOW_TEMT 0x00000040 /* Xmit shift register empty */
229#define IOC4_SHADOW_RFCE 0x00000080 /* Char in RX fifo has an error */
230#define IOC4_SHADOW_DCTS 0x00010000 /* Delta clear to send */
231#define IOC4_SHADOW_DDCD 0x00080000 /* Delta data carrier detect */
232#define IOC4_SHADOW_CTS 0x00100000 /* Clear to send */
233#define IOC4_SHADOW_DCD 0x00800000 /* Data carrier detect */
234#define IOC4_SHADOW_DTR 0x01000000 /* Data terminal ready */
235#define IOC4_SHADOW_RTS 0x02000000 /* Request to send */
236#define IOC4_SHADOW_OUT1 0x04000000 /* 16550 OUT1 bit */
237#define IOC4_SHADOW_OUT2 0x08000000 /* 16550 OUT2 bit */
238#define IOC4_SHADOW_LOOP 0x10000000 /* Loopback enabled */
239
240/* Bitmasks for IOC4_SRTR_<3:0> */
241#define IOC4_SRTR_CNT 0x00000fff /* Reload value for RX timer */
242#define IOC4_SRTR_CNT_VAL 0x0fff0000 /* Current value of RX timer */
243#define IOC4_SRTR_CNT_VAL_SHIFT 16
244#define IOC4_SRTR_HZ 16000 /* SRTR clock frequency */
245
246/* Serial port register map used for DMA and PIO serial I/O */
247struct ioc4_serialregs {
248 uint32_t sscr;
249 uint32_t stpir;
250 uint32_t stcir;
251 uint32_t srpir;
252 uint32_t srcir;
253 uint32_t srtr;
254 uint32_t shadow;
255};
256
257/* IOC4 UART register map */
258struct ioc4_uartregs {
259 char i4u_lcr;
260 union {
261 char iir; /* read only */
262 char fcr; /* write only */
263 } u3;
264 union {
265 char ier; /* DLAB == 0 */
266 char dlm; /* DLAB == 1 */
267 } u2;
268 union {
269 char rbr; /* read only, DLAB == 0 */
270 char thr; /* write only, DLAB == 0 */
271 char dll; /* DLAB == 1 */
272 } u1;
273 char i4u_scr;
274 char i4u_msr;
275 char i4u_lsr;
276 char i4u_mcr;
277};
278
279/* short names */
280#define i4u_dll u1.dll
281#define i4u_ier u2.ier
282#define i4u_dlm u2.dlm
283#define i4u_fcr u3.fcr
284
Brent Casavant22329b52005-06-21 17:15:59 -0700285/* Serial port registers used for DMA serial I/O */
286struct ioc4_serial {
287 uint32_t sbbr01_l;
288 uint32_t sbbr01_h;
289 uint32_t sbbr23_l;
290 uint32_t sbbr23_h;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700291
Brent Casavant22329b52005-06-21 17:15:59 -0700292 struct ioc4_serialregs port_0;
293 struct ioc4_serialregs port_1;
294 struct ioc4_serialregs port_2;
295 struct ioc4_serialregs port_3;
296 struct ioc4_uartregs uart_0;
297 struct ioc4_uartregs uart_1;
298 struct ioc4_uartregs uart_2;
299 struct ioc4_uartregs uart_3;
300} ioc4_serial;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700301
302/* UART clock speed */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700303#define IOC4_SER_XIN_CLK_66 66666667
304#define IOC4_SER_XIN_CLK_33 33333333
305
306#define IOC4_W_IES 0
307#define IOC4_W_IEC 1
308
309typedef void ioc4_intr_func_f(void *, uint32_t);
310typedef ioc4_intr_func_f *ioc4_intr_func_t;
311
Pat Gefre396dc442005-10-30 15:02:49 -0800312static unsigned int Num_of_ioc4_cards;
313
Linus Torvalds1da177e2005-04-16 15:20:36 -0700314/* defining this will get you LOTS of great debug info */
315//#define DEBUG_INTERRUPTS
316#define DPRINT_CONFIG(_x...) ;
317//#define DPRINT_CONFIG(_x...) printk _x
318
319/* number of characters left in xmit buffer before we ask for more */
320#define WAKEUP_CHARS 256
321
322/* number of characters we want to transmit to the lower level at a time */
Pat Gefre396dc442005-10-30 15:02:49 -0800323#define IOC4_MAX_CHARS 256
324#define IOC4_FIFO_CHARS 255
Linus Torvalds1da177e2005-04-16 15:20:36 -0700325
326/* Device name we're using */
Pat Gefre64b91372006-03-25 03:08:07 -0800327#define DEVICE_NAME_RS232 "ttyIOC"
328#define DEVICE_NAME_RS422 "ttyAIOC"
329#define DEVICE_MAJOR 204
330#define DEVICE_MINOR_RS232 50
331#define DEVICE_MINOR_RS422 84
332
Linus Torvalds1da177e2005-04-16 15:20:36 -0700333
334/* register offsets */
335#define IOC4_SERIAL_OFFSET 0x300
336
337/* flags for next_char_state */
338#define NCS_BREAK 0x1
339#define NCS_PARITY 0x2
340#define NCS_FRAMING 0x4
341#define NCS_OVERRUN 0x8
342
343/* cause we need SOME parameters ... */
344#define MIN_BAUD_SUPPORTED 1200
345#define MAX_BAUD_SUPPORTED 115200
346
347/* protocol types supported */
Pat Gefre64b91372006-03-25 03:08:07 -0800348#define PROTO_RS232 3
349#define PROTO_RS422 7
Linus Torvalds1da177e2005-04-16 15:20:36 -0700350
351/* Notification types */
352#define N_DATA_READY 0x01
353#define N_OUTPUT_LOWAT 0x02
354#define N_BREAK 0x04
355#define N_PARITY_ERROR 0x08
356#define N_FRAMING_ERROR 0x10
357#define N_OVERRUN_ERROR 0x20
358#define N_DDCD 0x40
359#define N_DCTS 0x80
360
361#define N_ALL_INPUT (N_DATA_READY | N_BREAK | \
362 N_PARITY_ERROR | N_FRAMING_ERROR | \
363 N_OVERRUN_ERROR | N_DDCD | N_DCTS)
364
365#define N_ALL_OUTPUT N_OUTPUT_LOWAT
366
367#define N_ALL_ERRORS (N_PARITY_ERROR | N_FRAMING_ERROR | N_OVERRUN_ERROR)
368
369#define N_ALL (N_DATA_READY | N_OUTPUT_LOWAT | N_BREAK | \
370 N_PARITY_ERROR | N_FRAMING_ERROR | \
371 N_OVERRUN_ERROR | N_DDCD | N_DCTS)
372
373#define SER_DIVISOR(_x, clk) (((clk) + (_x) * 8) / ((_x) * 16))
374#define DIVISOR_TO_BAUD(div, clk) ((clk) / 16 / (div))
375
376/* Some masks */
377#define LCR_MASK_BITS_CHAR (UART_LCR_WLEN5 | UART_LCR_WLEN6 \
378 | UART_LCR_WLEN7 | UART_LCR_WLEN8)
379#define LCR_MASK_STOP_BITS (UART_LCR_STOP)
380
Brent Casavant22329b52005-06-21 17:15:59 -0700381#define PENDING(_p) (readl(&(_p)->ip_mem->sio_ir.raw) & _p->ip_ienb)
382#define READ_SIO_IR(_p) readl(&(_p)->ip_mem->sio_ir.raw)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700383
384/* Default to 4k buffers */
385#ifdef IOC4_1K_BUFFERS
386#define RING_BUF_SIZE 1024
387#define IOC4_BUF_SIZE_BIT 0
388#define PROD_CONS_MASK IOC4_PROD_CONS_PTR_1K
389#else
390#define RING_BUF_SIZE 4096
391#define IOC4_BUF_SIZE_BIT IOC4_SBBR_L_SIZE
392#define PROD_CONS_MASK IOC4_PROD_CONS_PTR_4K
393#endif
394
395#define TOTAL_RING_BUF_SIZE (RING_BUF_SIZE * 4)
396
397/*
398 * This is the entry saved by the driver - one per card
399 */
Pat Gefre64b91372006-03-25 03:08:07 -0800400
401#define UART_PORT_MIN 0
402#define UART_PORT_RS232 UART_PORT_MIN
403#define UART_PORT_RS422 1
404#define UART_PORT_COUNT 2 /* one for each mode */
405
Linus Torvalds1da177e2005-04-16 15:20:36 -0700406struct ioc4_control {
407 int ic_irq;
408 struct {
Pat Gefre64b91372006-03-25 03:08:07 -0800409 /* uart ports are allocated here - 1 for rs232, 1 for rs422 */
410 struct uart_port icp_uart_port[UART_PORT_COUNT];
Linus Torvalds1da177e2005-04-16 15:20:36 -0700411 /* Handy reference material */
412 struct ioc4_port *icp_port;
413 } ic_port[IOC4_NUM_SERIAL_PORTS];
414 struct ioc4_soft *ic_soft;
415};
416
417/*
418 * per-IOC4 data structure
419 */
420#define MAX_IOC4_INTR_ENTS (8 * sizeof(uint32_t))
421struct ioc4_soft {
Brent Casavant22329b52005-06-21 17:15:59 -0700422 struct ioc4_misc_regs __iomem *is_ioc4_misc_addr;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700423 struct ioc4_serial __iomem *is_ioc4_serial_addr;
424
425 /* Each interrupt type has an entry in the array */
426 struct ioc4_intr_type {
427
428 /*
429 * Each in-use entry in this array contains at least
430 * one nonzero bit in sd_bits; no two entries in this
431 * array have overlapping sd_bits values.
432 */
433 struct ioc4_intr_info {
434 uint32_t sd_bits;
435 ioc4_intr_func_f *sd_intr;
436 void *sd_info;
437 } is_intr_info[MAX_IOC4_INTR_ENTS];
438
439 /* Number of entries active in the above array */
440 atomic_t is_num_intrs;
441 } is_intr_type[IOC4_NUM_INTR_TYPES];
442
443 /* is_ir_lock must be held while
444 * modifying sio_ie values, so
445 * we can be sure that sio_ie is
446 * not changing when we read it
447 * along with sio_ir.
448 */
449 spinlock_t is_ir_lock; /* SIO_IE[SC] mod lock */
450};
451
452/* Local port info for each IOC4 serial ports */
453struct ioc4_port {
Pat Gefre64b91372006-03-25 03:08:07 -0800454 struct uart_port *ip_port; /* current active port ptr */
455 /* Ptrs for all ports */
456 struct uart_port *ip_all_ports[UART_PORT_COUNT];
Linus Torvalds1da177e2005-04-16 15:20:36 -0700457 /* Back ptrs for this port */
458 struct ioc4_control *ip_control;
459 struct pci_dev *ip_pdev;
460 struct ioc4_soft *ip_ioc4_soft;
461
462 /* pci mem addresses */
Brent Casavant22329b52005-06-21 17:15:59 -0700463 struct ioc4_misc_regs __iomem *ip_mem;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700464 struct ioc4_serial __iomem *ip_serial;
465 struct ioc4_serialregs __iomem *ip_serial_regs;
466 struct ioc4_uartregs __iomem *ip_uart_regs;
467
468 /* Ring buffer page for this port */
469 dma_addr_t ip_dma_ringbuf;
470 /* vaddr of ring buffer */
471 struct ring_buffer *ip_cpu_ringbuf;
472
473 /* Rings for this port */
474 struct ring *ip_inring;
475 struct ring *ip_outring;
476
477 /* Hook to port specific values */
478 struct hooks *ip_hooks;
479
480 spinlock_t ip_lock;
481
482 /* Various rx/tx parameters */
483 int ip_baud;
484 int ip_tx_lowat;
485 int ip_rx_timeout;
486
487 /* Copy of notification bits */
488 int ip_notify;
489
490 /* Shadow copies of various registers so we don't need to PIO
491 * read them constantly
492 */
493 uint32_t ip_ienb; /* Enabled interrupts */
494 uint32_t ip_sscr;
495 uint32_t ip_tx_prod;
496 uint32_t ip_rx_cons;
497 int ip_pci_bus_speed;
498 unsigned char ip_flags;
499};
500
501/* tx low water mark. We need to notify the driver whenever tx is getting
502 * close to empty so it can refill the tx buffer and keep things going.
503 * Let's assume that if we interrupt 1 ms before the tx goes idle, we'll
504 * have no trouble getting in more chars in time (I certainly hope so).
505 */
506#define TX_LOWAT_LATENCY 1000
507#define TX_LOWAT_HZ (1000000 / TX_LOWAT_LATENCY)
508#define TX_LOWAT_CHARS(baud) (baud / 10 / TX_LOWAT_HZ)
509
510/* Flags per port */
511#define INPUT_HIGH 0x01
512#define DCD_ON 0x02
513#define LOWAT_WRITTEN 0x04
514#define READ_ABORTED 0x08
Pat Gefre64b91372006-03-25 03:08:07 -0800515#define PORT_ACTIVE 0x10
516#define PORT_INACTIVE 0 /* This is the value when "off" */
517
Linus Torvalds1da177e2005-04-16 15:20:36 -0700518
519/* Since each port has different register offsets and bitmasks
520 * for everything, we'll store those that we need in tables so we
521 * don't have to be constantly checking the port we are dealing with.
522 */
523struct hooks {
524 uint32_t intr_delta_dcd;
525 uint32_t intr_delta_cts;
526 uint32_t intr_tx_mt;
527 uint32_t intr_rx_timer;
528 uint32_t intr_rx_high;
529 uint32_t intr_tx_explicit;
530 uint32_t intr_dma_error;
531 uint32_t intr_clear;
532 uint32_t intr_all;
Brent Casavant22329b52005-06-21 17:15:59 -0700533 int rs422_select_pin;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700534};
535
536static struct hooks hooks_array[IOC4_NUM_SERIAL_PORTS] = {
537 /* Values for port 0 */
538 {
539 IOC4_SIO_IR_S0_DELTA_DCD, IOC4_SIO_IR_S0_DELTA_CTS,
540 IOC4_SIO_IR_S0_TX_MT, IOC4_SIO_IR_S0_RX_TIMER,
541 IOC4_SIO_IR_S0_RX_HIGH, IOC4_SIO_IR_S0_TX_EXPLICIT,
542 IOC4_OTHER_IR_S0_MEMERR,
543 (IOC4_SIO_IR_S0_TX_MT | IOC4_SIO_IR_S0_RX_FULL |
544 IOC4_SIO_IR_S0_RX_HIGH | IOC4_SIO_IR_S0_RX_TIMER |
545 IOC4_SIO_IR_S0_DELTA_DCD | IOC4_SIO_IR_S0_DELTA_CTS |
546 IOC4_SIO_IR_S0_INT | IOC4_SIO_IR_S0_TX_EXPLICIT),
547 IOC4_SIO_IR_S0, IOC4_GPPR_UART0_MODESEL_PIN,
548 },
549
550 /* Values for port 1 */
551 {
552 IOC4_SIO_IR_S1_DELTA_DCD, IOC4_SIO_IR_S1_DELTA_CTS,
553 IOC4_SIO_IR_S1_TX_MT, IOC4_SIO_IR_S1_RX_TIMER,
554 IOC4_SIO_IR_S1_RX_HIGH, IOC4_SIO_IR_S1_TX_EXPLICIT,
555 IOC4_OTHER_IR_S1_MEMERR,
556 (IOC4_SIO_IR_S1_TX_MT | IOC4_SIO_IR_S1_RX_FULL |
557 IOC4_SIO_IR_S1_RX_HIGH | IOC4_SIO_IR_S1_RX_TIMER |
558 IOC4_SIO_IR_S1_DELTA_DCD | IOC4_SIO_IR_S1_DELTA_CTS |
559 IOC4_SIO_IR_S1_INT | IOC4_SIO_IR_S1_TX_EXPLICIT),
560 IOC4_SIO_IR_S1, IOC4_GPPR_UART1_MODESEL_PIN,
561 },
562
563 /* Values for port 2 */
564 {
565 IOC4_SIO_IR_S2_DELTA_DCD, IOC4_SIO_IR_S2_DELTA_CTS,
566 IOC4_SIO_IR_S2_TX_MT, IOC4_SIO_IR_S2_RX_TIMER,
567 IOC4_SIO_IR_S2_RX_HIGH, IOC4_SIO_IR_S2_TX_EXPLICIT,
568 IOC4_OTHER_IR_S2_MEMERR,
569 (IOC4_SIO_IR_S2_TX_MT | IOC4_SIO_IR_S2_RX_FULL |
570 IOC4_SIO_IR_S2_RX_HIGH | IOC4_SIO_IR_S2_RX_TIMER |
571 IOC4_SIO_IR_S2_DELTA_DCD | IOC4_SIO_IR_S2_DELTA_CTS |
572 IOC4_SIO_IR_S2_INT | IOC4_SIO_IR_S2_TX_EXPLICIT),
573 IOC4_SIO_IR_S2, IOC4_GPPR_UART2_MODESEL_PIN,
574 },
575
576 /* Values for port 3 */
577 {
578 IOC4_SIO_IR_S3_DELTA_DCD, IOC4_SIO_IR_S3_DELTA_CTS,
579 IOC4_SIO_IR_S3_TX_MT, IOC4_SIO_IR_S3_RX_TIMER,
580 IOC4_SIO_IR_S3_RX_HIGH, IOC4_SIO_IR_S3_TX_EXPLICIT,
581 IOC4_OTHER_IR_S3_MEMERR,
582 (IOC4_SIO_IR_S3_TX_MT | IOC4_SIO_IR_S3_RX_FULL |
583 IOC4_SIO_IR_S3_RX_HIGH | IOC4_SIO_IR_S3_RX_TIMER |
584 IOC4_SIO_IR_S3_DELTA_DCD | IOC4_SIO_IR_S3_DELTA_CTS |
585 IOC4_SIO_IR_S3_INT | IOC4_SIO_IR_S3_TX_EXPLICIT),
586 IOC4_SIO_IR_S3, IOC4_GPPR_UART3_MODESEL_PIN,
587 }
588};
589
590/* A ring buffer entry */
591struct ring_entry {
592 union {
593 struct {
594 uint32_t alldata;
595 uint32_t allsc;
596 } all;
597 struct {
598 char data[4]; /* data bytes */
599 char sc[4]; /* status/control */
600 } s;
601 } u;
602};
603
604/* Test the valid bits in any of the 4 sc chars using "allsc" member */
605#define RING_ANY_VALID \
606 ((uint32_t)(IOC4_RXSB_MODEM_VALID | IOC4_RXSB_DATA_VALID) * 0x01010101)
607
608#define ring_sc u.s.sc
609#define ring_data u.s.data
610#define ring_allsc u.all.allsc
611
612/* Number of entries per ring buffer. */
613#define ENTRIES_PER_RING (RING_BUF_SIZE / (int) sizeof(struct ring_entry))
614
615/* An individual ring */
616struct ring {
617 struct ring_entry entries[ENTRIES_PER_RING];
618};
619
620/* The whole enchilada */
621struct ring_buffer {
622 struct ring TX_0_OR_2;
623 struct ring RX_0_OR_2;
624 struct ring TX_1_OR_3;
625 struct ring RX_1_OR_3;
626};
627
628/* Get a ring from a port struct */
629#define RING(_p, _wh) &(((struct ring_buffer *)((_p)->ip_cpu_ringbuf))->_wh)
630
631/* Infinite loop detection.
632 */
633#define MAXITER 10000000
634
635/* Prototypes */
636static void receive_chars(struct uart_port *);
637static void handle_intr(void *arg, uint32_t sio_ir);
638
Pat Gefre64b91372006-03-25 03:08:07 -0800639/*
640 * port_is_active - determines if this port is currently active
641 * @port: ptr to soft struct for this port
642 * @uart_port: uart port to test for
643 */
644static inline int port_is_active(struct ioc4_port *port,
645 struct uart_port *uart_port)
646{
647 if (port) {
648 if ((port->ip_flags & PORT_ACTIVE)
649 && (port->ip_port == uart_port))
650 return 1;
651 }
652 return 0;
653}
654
655
Linus Torvalds1da177e2005-04-16 15:20:36 -0700656/**
657 * write_ireg - write the interrupt regs
658 * @ioc4_soft: ptr to soft struct for this port
659 * @val: value to write
660 * @which: which register
661 * @type: which ireg set
662 */
663static inline void
664write_ireg(struct ioc4_soft *ioc4_soft, uint32_t val, int which, int type)
665{
Brent Casavant22329b52005-06-21 17:15:59 -0700666 struct ioc4_misc_regs __iomem *mem = ioc4_soft->is_ioc4_misc_addr;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700667 unsigned long flags;
668
669 spin_lock_irqsave(&ioc4_soft->is_ir_lock, flags);
670
671 switch (type) {
672 case IOC4_SIO_INTR_TYPE:
673 switch (which) {
674 case IOC4_W_IES:
Brent Casavant22329b52005-06-21 17:15:59 -0700675 writel(val, &mem->sio_ies.raw);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700676 break;
677
678 case IOC4_W_IEC:
Brent Casavant22329b52005-06-21 17:15:59 -0700679 writel(val, &mem->sio_iec.raw);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700680 break;
681 }
682 break;
683
684 case IOC4_OTHER_INTR_TYPE:
685 switch (which) {
686 case IOC4_W_IES:
Brent Casavant22329b52005-06-21 17:15:59 -0700687 writel(val, &mem->other_ies.raw);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700688 break;
689
690 case IOC4_W_IEC:
Brent Casavant22329b52005-06-21 17:15:59 -0700691 writel(val, &mem->other_iec.raw);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700692 break;
693 }
694 break;
695
696 default:
697 break;
698 }
699 spin_unlock_irqrestore(&ioc4_soft->is_ir_lock, flags);
700}
701
702/**
703 * set_baud - Baud rate setting code
704 * @port: port to set
705 * @baud: baud rate to use
706 */
707static int set_baud(struct ioc4_port *port, int baud)
708{
709 int actual_baud;
710 int diff;
711 int lcr;
712 unsigned short divisor;
713 struct ioc4_uartregs __iomem *uart;
714
715 divisor = SER_DIVISOR(baud, port->ip_pci_bus_speed);
716 if (!divisor)
717 return 1;
718 actual_baud = DIVISOR_TO_BAUD(divisor, port->ip_pci_bus_speed);
719
720 diff = actual_baud - baud;
721 if (diff < 0)
722 diff = -diff;
723
724 /* If we're within 1%, we've found a match */
725 if (diff * 100 > actual_baud)
726 return 1;
727
728 uart = port->ip_uart_regs;
729 lcr = readb(&uart->i4u_lcr);
730 writeb(lcr | UART_LCR_DLAB, &uart->i4u_lcr);
731 writeb((unsigned char)divisor, &uart->i4u_dll);
732 writeb((unsigned char)(divisor >> 8), &uart->i4u_dlm);
733 writeb(lcr, &uart->i4u_lcr);
734 return 0;
735}
736
737
738/**
739 * get_ioc4_port - given a uart port, return the control structure
740 * @port: uart port
Pat Gefre64b91372006-03-25 03:08:07 -0800741 * @set: set this port as current
Linus Torvalds1da177e2005-04-16 15:20:36 -0700742 */
Pat Gefre64b91372006-03-25 03:08:07 -0800743static struct ioc4_port *get_ioc4_port(struct uart_port *the_port, int set)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700744{
Brent Casavant22329b52005-06-21 17:15:59 -0700745 struct ioc4_driver_data *idd = dev_get_drvdata(the_port->dev);
746 struct ioc4_control *control = idd->idd_serial_data;
Pat Gefre64b91372006-03-25 03:08:07 -0800747 struct ioc4_port *port;
748 int port_num, port_type;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700749
750 if (control) {
Pat Gefre64b91372006-03-25 03:08:07 -0800751 for ( port_num = 0; port_num < IOC4_NUM_SERIAL_PORTS;
752 port_num++ ) {
753 port = control->ic_port[port_num].icp_port;
754 if (!port)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700755 continue;
Pat Gefre64b91372006-03-25 03:08:07 -0800756 for (port_type = UART_PORT_MIN;
757 port_type < UART_PORT_COUNT;
758 port_type++) {
759 if (the_port == port->ip_all_ports
760 [port_type]) {
761 /* set local copy */
762 if (set) {
763 port->ip_port = the_port;
764 }
765 return port;
766 }
767 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700768 }
769 }
770 return NULL;
771}
772
773/* The IOC4 hardware provides no atomic way to determine if interrupts
774 * are pending since two reads are required to do so. The handler must
775 * read the SIO_IR and the SIO_IES, and take the logical and of the
776 * two. When this value is zero, all interrupts have been serviced and
777 * the handler may return.
778 *
779 * This has the unfortunate "hole" that, if some other CPU or
780 * some other thread or some higher level interrupt manages to
781 * modify SIO_IE between our reads of SIO_IR and SIO_IE, we may
782 * think we have observed SIO_IR&SIO_IE==0 when in fact this
783 * condition never really occurred.
784 *
785 * To solve this, we use a simple spinlock that must be held
786 * whenever modifying SIO_IE; holding this lock while observing
787 * both SIO_IR and SIO_IE guarantees that we do not falsely
788 * conclude that no enabled interrupts are pending.
789 */
790
791static inline uint32_t
792pending_intrs(struct ioc4_soft *soft, int type)
793{
Brent Casavant22329b52005-06-21 17:15:59 -0700794 struct ioc4_misc_regs __iomem *mem = soft->is_ioc4_misc_addr;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700795 unsigned long flag;
796 uint32_t intrs = 0;
797
798 BUG_ON(!((type == IOC4_SIO_INTR_TYPE)
799 || (type == IOC4_OTHER_INTR_TYPE)));
800
801 spin_lock_irqsave(&soft->is_ir_lock, flag);
802
803 switch (type) {
804 case IOC4_SIO_INTR_TYPE:
Brent Casavant22329b52005-06-21 17:15:59 -0700805 intrs = readl(&mem->sio_ir.raw) & readl(&mem->sio_ies.raw);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700806 break;
807
808 case IOC4_OTHER_INTR_TYPE:
Brent Casavant22329b52005-06-21 17:15:59 -0700809 intrs = readl(&mem->other_ir.raw) & readl(&mem->other_ies.raw);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700810
811 /* Don't process any ATA interrupte */
812 intrs &= ~(IOC4_OTHER_IR_ATA_INT | IOC4_OTHER_IR_ATA_MEMERR);
813 break;
814
815 default:
816 break;
817 }
818 spin_unlock_irqrestore(&soft->is_ir_lock, flag);
819 return intrs;
820}
821
822/**
823 * port_init - Initialize the sio and ioc4 hardware for a given port
824 * called per port from attach...
825 * @port: port to initialize
826 */
827static int inline port_init(struct ioc4_port *port)
828{
829 uint32_t sio_cr;
830 struct hooks *hooks = port->ip_hooks;
831 struct ioc4_uartregs __iomem *uart;
832
833 /* Idle the IOC4 serial interface */
834 writel(IOC4_SSCR_RESET, &port->ip_serial_regs->sscr);
835
836 /* Wait until any pending bus activity for this port has ceased */
837 do
Brent Casavant22329b52005-06-21 17:15:59 -0700838 sio_cr = readl(&port->ip_mem->sio_cr.raw);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700839 while (!(sio_cr & IOC4_SIO_CR_SIO_DIAG_IDLE));
840
841 /* Finish reset sequence */
842 writel(0, &port->ip_serial_regs->sscr);
843
844 /* Once RESET is done, reload cached tx_prod and rx_cons values
845 * and set rings to empty by making prod == cons
846 */
847 port->ip_tx_prod = readl(&port->ip_serial_regs->stcir) & PROD_CONS_MASK;
848 writel(port->ip_tx_prod, &port->ip_serial_regs->stpir);
849 port->ip_rx_cons = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK;
Patrick Gefre5b052d82005-05-01 08:59:22 -0700850 writel(port->ip_rx_cons | IOC4_SRCIR_ARM, &port->ip_serial_regs->srcir);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700851
852 /* Disable interrupts for this 16550 */
853 uart = port->ip_uart_regs;
854 writeb(0, &uart->i4u_lcr);
855 writeb(0, &uart->i4u_ier);
856
857 /* Set the default baud */
858 set_baud(port, port->ip_baud);
859
860 /* Set line control to 8 bits no parity */
861 writeb(UART_LCR_WLEN8 | 0, &uart->i4u_lcr);
862 /* UART_LCR_STOP == 1 stop */
863
864 /* Enable the FIFOs */
865 writeb(UART_FCR_ENABLE_FIFO, &uart->i4u_fcr);
866 /* then reset 16550 FIFOs */
867 writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT,
868 &uart->i4u_fcr);
869
870 /* Clear modem control register */
871 writeb(0, &uart->i4u_mcr);
872
873 /* Clear deltas in modem status register */
874 readb(&uart->i4u_msr);
875
876 /* Only do this once per port pair */
877 if (port->ip_hooks == &hooks_array[0]
878 || port->ip_hooks == &hooks_array[2]) {
879 unsigned long ring_pci_addr;
880 uint32_t __iomem *sbbr_l;
881 uint32_t __iomem *sbbr_h;
882
883 if (port->ip_hooks == &hooks_array[0]) {
884 sbbr_l = &port->ip_serial->sbbr01_l;
885 sbbr_h = &port->ip_serial->sbbr01_h;
886 } else {
887 sbbr_l = &port->ip_serial->sbbr23_l;
888 sbbr_h = &port->ip_serial->sbbr23_h;
889 }
890
891 ring_pci_addr = (unsigned long __iomem)port->ip_dma_ringbuf;
892 DPRINT_CONFIG(("%s: ring_pci_addr 0x%lx\n",
Harvey Harrison71cc2c22008-04-30 00:55:10 -0700893 __func__, ring_pci_addr));
Linus Torvalds1da177e2005-04-16 15:20:36 -0700894
895 writel((unsigned int)((uint64_t)ring_pci_addr >> 32), sbbr_h);
896 writel((unsigned int)ring_pci_addr | IOC4_BUF_SIZE_BIT, sbbr_l);
897 }
898
899 /* Set the receive timeout value to 10 msec */
900 writel(IOC4_SRTR_HZ / 100, &port->ip_serial_regs->srtr);
901
902 /* Set rx threshold, enable DMA */
903 /* Set high water mark at 3/4 of full ring */
904 port->ip_sscr = (ENTRIES_PER_RING * 3 / 4);
905 writel(port->ip_sscr, &port->ip_serial_regs->sscr);
906
907 /* Disable and clear all serial related interrupt bits */
908 write_ireg(port->ip_ioc4_soft, hooks->intr_clear,
909 IOC4_W_IEC, IOC4_SIO_INTR_TYPE);
910 port->ip_ienb &= ~hooks->intr_clear;
Brent Casavant22329b52005-06-21 17:15:59 -0700911 writel(hooks->intr_clear, &port->ip_mem->sio_ir.raw);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700912 return 0;
913}
914
915/**
916 * handle_dma_error_intr - service any pending DMA error interrupts for the
917 * given port - 2nd level called via sd_intr
918 * @arg: handler arg
919 * @other_ir: ioc4regs
920 */
921static void handle_dma_error_intr(void *arg, uint32_t other_ir)
922{
923 struct ioc4_port *port = (struct ioc4_port *)arg;
924 struct hooks *hooks = port->ip_hooks;
Andrew Mortona5a89ba2006-10-29 22:46:33 -0800925 unsigned long flags;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700926
927 spin_lock_irqsave(&port->ip_lock, flags);
928
929 /* ACK the interrupt */
Brent Casavant22329b52005-06-21 17:15:59 -0700930 writel(hooks->intr_dma_error, &port->ip_mem->other_ir.raw);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700931
Brent Casavant22329b52005-06-21 17:15:59 -0700932 if (readl(&port->ip_mem->pci_err_addr_l.raw) & IOC4_PCI_ERR_ADDR_VLD) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700933 printk(KERN_ERR
Randy Dunlap0e12ddf2009-09-04 17:04:28 -0700934 "PCI error address is 0x%llx, "
Linus Torvalds1da177e2005-04-16 15:20:36 -0700935 "master is serial port %c %s\n",
936 (((uint64_t)readl(&port->ip_mem->pci_err_addr_h)
937 << 32)
Brent Casavant22329b52005-06-21 17:15:59 -0700938 | readl(&port->ip_mem->pci_err_addr_l.raw))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700939 & IOC4_PCI_ERR_ADDR_ADDR_MSK, '1' +
Brent Casavant22329b52005-06-21 17:15:59 -0700940 ((char)(readl(&port->ip_mem->pci_err_addr_l.raw) &
Linus Torvalds1da177e2005-04-16 15:20:36 -0700941 IOC4_PCI_ERR_ADDR_MST_NUM_MSK) >> 1),
Brent Casavant22329b52005-06-21 17:15:59 -0700942 (readl(&port->ip_mem->pci_err_addr_l.raw)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700943 & IOC4_PCI_ERR_ADDR_MST_TYP_MSK)
944 ? "RX" : "TX");
945
Brent Casavant22329b52005-06-21 17:15:59 -0700946 if (readl(&port->ip_mem->pci_err_addr_l.raw)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700947 & IOC4_PCI_ERR_ADDR_MUL_ERR) {
948 printk(KERN_ERR
949 "Multiple errors occurred\n");
950 }
951 }
952 spin_unlock_irqrestore(&port->ip_lock, flags);
953
954 /* Re-enable DMA error interrupts */
955 write_ireg(port->ip_ioc4_soft, hooks->intr_dma_error, IOC4_W_IES,
956 IOC4_OTHER_INTR_TYPE);
957}
958
959/**
960 * intr_connect - interrupt connect function
961 * @soft: soft struct for this card
962 * @type: interrupt type
963 * @intrbits: bit pattern to set
964 * @intr: handler function
965 * @info: handler arg
966 */
967static void
968intr_connect(struct ioc4_soft *soft, int type,
969 uint32_t intrbits, ioc4_intr_func_f * intr, void *info)
970{
971 int i;
972 struct ioc4_intr_info *intr_ptr;
973
974 BUG_ON(!((type == IOC4_SIO_INTR_TYPE)
975 || (type == IOC4_OTHER_INTR_TYPE)));
976
977 i = atomic_inc(&soft-> is_intr_type[type].is_num_intrs) - 1;
978 BUG_ON(!(i < MAX_IOC4_INTR_ENTS || (printk("i %d\n", i), 0)));
979
980 /* Save off the lower level interrupt handler */
981 intr_ptr = &soft->is_intr_type[type].is_intr_info[i];
982 intr_ptr->sd_bits = intrbits;
983 intr_ptr->sd_intr = intr;
984 intr_ptr->sd_info = info;
985}
986
987/**
988 * ioc4_intr - Top level IOC4 interrupt handler.
989 * @irq: irq value
990 * @arg: handler arg
Linus Torvalds1da177e2005-04-16 15:20:36 -0700991 */
Pat Gefre64b91372006-03-25 03:08:07 -0800992
David Howells7d12e782006-10-05 14:55:46 +0100993static irqreturn_t ioc4_intr(int irq, void *arg)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700994{
995 struct ioc4_soft *soft;
996 uint32_t this_ir, this_mir;
997 int xx, num_intrs = 0;
998 int intr_type;
999 int handled = 0;
Pat Gefre64b91372006-03-25 03:08:07 -08001000 struct ioc4_intr_info *intr_info;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001001
1002 soft = arg;
1003 for (intr_type = 0; intr_type < IOC4_NUM_INTR_TYPES; intr_type++) {
1004 num_intrs = (int)atomic_read(
1005 &soft->is_intr_type[intr_type].is_num_intrs);
1006
1007 this_mir = this_ir = pending_intrs(soft, intr_type);
1008
1009 /* Farm out the interrupt to the various drivers depending on
1010 * which interrupt bits are set.
1011 */
1012 for (xx = 0; xx < num_intrs; xx++) {
Pat Gefre64b91372006-03-25 03:08:07 -08001013 intr_info = &soft->is_intr_type[intr_type].is_intr_info[xx];
1014 if ((this_mir = this_ir & intr_info->sd_bits)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001015 /* Disable owned interrupts, call handler */
1016 handled++;
Pat Gefre64b91372006-03-25 03:08:07 -08001017 write_ireg(soft, intr_info->sd_bits, IOC4_W_IEC,
Linus Torvalds1da177e2005-04-16 15:20:36 -07001018 intr_type);
Pat Gefre64b91372006-03-25 03:08:07 -08001019 intr_info->sd_intr(intr_info->sd_info, this_mir);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001020 this_ir &= ~this_mir;
1021 }
1022 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001023 }
1024#ifdef DEBUG_INTERRUPTS
1025 {
Brent Casavant22329b52005-06-21 17:15:59 -07001026 struct ioc4_misc_regs __iomem *mem = soft->is_ioc4_misc_addr;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001027 unsigned long flag;
1028
1029 spin_lock_irqsave(&soft->is_ir_lock, flag);
Brent Casavant22329b52005-06-21 17:15:59 -07001030 printk ("%s : %d : mem 0x%p sio_ir 0x%x sio_ies 0x%x "
1031 "other_ir 0x%x other_ies 0x%x mask 0x%x\n",
Harvey Harrison71cc2c22008-04-30 00:55:10 -07001032 __func__, __LINE__,
Brent Casavant22329b52005-06-21 17:15:59 -07001033 (void *)mem, readl(&mem->sio_ir.raw),
1034 readl(&mem->sio_ies.raw),
1035 readl(&mem->other_ir.raw),
1036 readl(&mem->other_ies.raw),
Linus Torvalds1da177e2005-04-16 15:20:36 -07001037 IOC4_OTHER_IR_ATA_INT | IOC4_OTHER_IR_ATA_MEMERR);
1038 spin_unlock_irqrestore(&soft->is_ir_lock, flag);
1039 }
1040#endif
1041 return handled ? IRQ_HANDLED : IRQ_NONE;
1042}
1043
1044/**
1045 * ioc4_attach_local - Device initialization.
1046 * Called at *_attach() time for each
1047 * IOC4 with serial ports in the system.
Brent Casavantd4c477c2005-06-21 17:16:01 -07001048 * @idd: Master module data for this IOC4
Linus Torvalds1da177e2005-04-16 15:20:36 -07001049 */
Brent Casavantd4c477c2005-06-21 17:16:01 -07001050static int inline ioc4_attach_local(struct ioc4_driver_data *idd)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001051{
1052 struct ioc4_port *port;
1053 struct ioc4_port *ports[IOC4_NUM_SERIAL_PORTS];
1054 int port_number;
1055 uint16_t ioc4_revid_min = 62;
1056 uint16_t ioc4_revid;
Brent Casavantd4c477c2005-06-21 17:16:01 -07001057 struct pci_dev *pdev = idd->idd_pdev;
1058 struct ioc4_control* control = idd->idd_serial_data;
1059 struct ioc4_soft *soft = control->ic_soft;
1060 void __iomem *ioc4_misc = idd->idd_misc_regs;
1061 void __iomem *ioc4_serial = soft->is_ioc4_serial_addr;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001062
1063 /* IOC4 firmware must be at least rev 62 */
1064 pci_read_config_word(pdev, PCI_COMMAND_SPECIAL, &ioc4_revid);
1065
1066 printk(KERN_INFO "IOC4 firmware revision %d\n", ioc4_revid);
1067 if (ioc4_revid < ioc4_revid_min) {
1068 printk(KERN_WARNING
1069 "IOC4 serial not supported on firmware rev %d, "
1070 "please upgrade to rev %d or higher\n",
1071 ioc4_revid, ioc4_revid_min);
1072 return -EPERM;
1073 }
Brent Casavant22329b52005-06-21 17:15:59 -07001074 BUG_ON(ioc4_misc == NULL);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001075 BUG_ON(ioc4_serial == NULL);
1076
1077 /* Create port structures for each port */
1078 for (port_number = 0; port_number < IOC4_NUM_SERIAL_PORTS;
1079 port_number++) {
Burman Yan8f31bb32007-02-14 00:33:07 -08001080 port = kzalloc(sizeof(struct ioc4_port), GFP_KERNEL);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001081 if (!port) {
1082 printk(KERN_WARNING
1083 "IOC4 serial memory not available for port\n");
1084 return -ENOMEM;
1085 }
Pat Gefre396dc442005-10-30 15:02:49 -08001086 spin_lock_init(&port->ip_lock);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001087
1088 /* we need to remember the previous ones, to point back to
1089 * them farther down - setting up the ring buffers.
1090 */
1091 ports[port_number] = port;
1092
1093 /* Allocate buffers and jumpstart the hardware. */
1094 control->ic_port[port_number].icp_port = port;
1095 port->ip_ioc4_soft = soft;
1096 port->ip_pdev = pdev;
1097 port->ip_ienb = 0;
Brent Casavantd4c477c2005-06-21 17:16:01 -07001098 /* Use baud rate calculations based on detected PCI
1099 * bus speed. Simply test whether the PCI clock is
1100 * running closer to 66MHz or 33MHz.
1101 */
1102 if (idd->count_period/IOC4_EXTINT_COUNT_DIVISOR < 20) {
1103 port->ip_pci_bus_speed = IOC4_SER_XIN_CLK_66;
1104 } else {
1105 port->ip_pci_bus_speed = IOC4_SER_XIN_CLK_33;
1106 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001107 port->ip_baud = 9600;
1108 port->ip_control = control;
Brent Casavant22329b52005-06-21 17:15:59 -07001109 port->ip_mem = ioc4_misc;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001110 port->ip_serial = ioc4_serial;
1111
1112 /* point to the right hook */
1113 port->ip_hooks = &hooks_array[port_number];
1114
1115 /* Get direct hooks to the serial regs and uart regs
1116 * for this port
1117 */
1118 switch (port_number) {
1119 case 0:
1120 port->ip_serial_regs = &(port->ip_serial->port_0);
1121 port->ip_uart_regs = &(port->ip_serial->uart_0);
1122 break;
1123 case 1:
1124 port->ip_serial_regs = &(port->ip_serial->port_1);
1125 port->ip_uart_regs = &(port->ip_serial->uart_1);
1126 break;
1127 case 2:
1128 port->ip_serial_regs = &(port->ip_serial->port_2);
1129 port->ip_uart_regs = &(port->ip_serial->uart_2);
1130 break;
1131 default:
1132 case 3:
1133 port->ip_serial_regs = &(port->ip_serial->port_3);
1134 port->ip_uart_regs = &(port->ip_serial->uart_3);
1135 break;
1136 }
1137
1138 /* ring buffers are 1 to a pair of ports */
1139 if (port_number && (port_number & 1)) {
1140 /* odd use the evens buffer */
1141 port->ip_dma_ringbuf =
1142 ports[port_number - 1]->ip_dma_ringbuf;
1143 port->ip_cpu_ringbuf =
1144 ports[port_number - 1]->ip_cpu_ringbuf;
1145 port->ip_inring = RING(port, RX_1_OR_3);
1146 port->ip_outring = RING(port, TX_1_OR_3);
1147
1148 } else {
1149 if (port->ip_dma_ringbuf == 0) {
1150 port->ip_cpu_ringbuf = pci_alloc_consistent
1151 (pdev, TOTAL_RING_BUF_SIZE,
1152 &port->ip_dma_ringbuf);
1153
1154 }
1155 BUG_ON(!((((int64_t)port->ip_dma_ringbuf) &
1156 (TOTAL_RING_BUF_SIZE - 1)) == 0));
1157 DPRINT_CONFIG(("%s : ip_cpu_ringbuf 0x%p "
1158 "ip_dma_ringbuf 0x%p\n",
Harvey Harrison71cc2c22008-04-30 00:55:10 -07001159 __func__,
Linus Torvalds1da177e2005-04-16 15:20:36 -07001160 (void *)port->ip_cpu_ringbuf,
1161 (void *)port->ip_dma_ringbuf));
1162 port->ip_inring = RING(port, RX_0_OR_2);
1163 port->ip_outring = RING(port, TX_0_OR_2);
1164 }
1165 DPRINT_CONFIG(("%s : port %d [addr 0x%p] control 0x%p",
Harvey Harrison71cc2c22008-04-30 00:55:10 -07001166 __func__,
Linus Torvalds1da177e2005-04-16 15:20:36 -07001167 port_number, (void *)port, (void *)control));
1168 DPRINT_CONFIG((" ip_serial_regs 0x%p ip_uart_regs 0x%p\n",
1169 (void *)port->ip_serial_regs,
1170 (void *)port->ip_uart_regs));
1171
1172 /* Initialize the hardware for IOC4 */
1173 port_init(port);
1174
1175 DPRINT_CONFIG(("%s: port_number %d port 0x%p inring 0x%p "
1176 "outring 0x%p\n",
Harvey Harrison71cc2c22008-04-30 00:55:10 -07001177 __func__,
Linus Torvalds1da177e2005-04-16 15:20:36 -07001178 port_number, (void *)port,
1179 (void *)port->ip_inring,
1180 (void *)port->ip_outring));
1181
1182 /* Attach interrupt handlers */
1183 intr_connect(soft, IOC4_SIO_INTR_TYPE,
1184 GET_SIO_IR(port_number),
1185 handle_intr, port);
1186
1187 intr_connect(soft, IOC4_OTHER_INTR_TYPE,
1188 GET_OTHER_IR(port_number),
1189 handle_dma_error_intr, port);
1190 }
1191 return 0;
1192}
1193
1194/**
1195 * enable_intrs - enable interrupts
1196 * @port: port to enable
1197 * @mask: mask to use
1198 */
1199static void enable_intrs(struct ioc4_port *port, uint32_t mask)
1200{
1201 struct hooks *hooks = port->ip_hooks;
1202
1203 if ((port->ip_ienb & mask) != mask) {
1204 write_ireg(port->ip_ioc4_soft, mask, IOC4_W_IES,
1205 IOC4_SIO_INTR_TYPE);
1206 port->ip_ienb |= mask;
1207 }
1208
1209 if (port->ip_ienb)
1210 write_ireg(port->ip_ioc4_soft, hooks->intr_dma_error,
1211 IOC4_W_IES, IOC4_OTHER_INTR_TYPE);
1212}
1213
1214/**
1215 * local_open - local open a port
1216 * @port: port to open
1217 */
1218static inline int local_open(struct ioc4_port *port)
1219{
1220 int spiniter = 0;
1221
Pat Gefre64b91372006-03-25 03:08:07 -08001222 port->ip_flags = PORT_ACTIVE;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001223
1224 /* Pause the DMA interface if necessary */
1225 if (port->ip_sscr & IOC4_SSCR_DMA_EN) {
1226 writel(port->ip_sscr | IOC4_SSCR_DMA_PAUSE,
1227 &port->ip_serial_regs->sscr);
1228 while((readl(&port->ip_serial_regs-> sscr)
1229 & IOC4_SSCR_PAUSE_STATE) == 0) {
1230 spiniter++;
1231 if (spiniter > MAXITER) {
Pat Gefre64b91372006-03-25 03:08:07 -08001232 port->ip_flags = PORT_INACTIVE;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001233 return -1;
1234 }
1235 }
1236 }
1237
1238 /* Reset the input fifo. If the uart received chars while the port
1239 * was closed and DMA is not enabled, the uart may have a bunch of
1240 * chars hanging around in its rx fifo which will not be discarded
1241 * by rclr in the upper layer. We must get rid of them here.
1242 */
1243 writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR,
1244 &port->ip_uart_regs->i4u_fcr);
1245
1246 writeb(UART_LCR_WLEN8, &port->ip_uart_regs->i4u_lcr);
1247 /* UART_LCR_STOP == 1 stop */
1248
1249 /* Re-enable DMA, set default threshold to intr whenever there is
1250 * data available.
1251 */
1252 port->ip_sscr &= ~IOC4_SSCR_RX_THRESHOLD;
1253 port->ip_sscr |= 1; /* default threshold */
1254
1255 /* Plug in the new sscr. This implicitly clears the DMA_PAUSE
1256 * flag if it was set above
1257 */
1258 writel(port->ip_sscr, &port->ip_serial_regs->sscr);
1259 port->ip_tx_lowat = 1;
1260 return 0;
1261}
1262
1263/**
1264 * set_rx_timeout - Set rx timeout and threshold values.
1265 * @port: port to use
1266 * @timeout: timeout value in ticks
1267 */
1268static inline int set_rx_timeout(struct ioc4_port *port, int timeout)
1269{
1270 int threshold;
1271
1272 port->ip_rx_timeout = timeout;
1273
1274 /* Timeout is in ticks. Let's figure out how many chars we
1275 * can receive at the current baud rate in that interval
1276 * and set the rx threshold to that amount. There are 4 chars
1277 * per ring entry, so we'll divide the number of chars that will
1278 * arrive in timeout by 4.
Patrick Gefre6cb28752005-05-01 08:59:21 -07001279 * So .... timeout * baud / 10 / HZ / 4, with HZ = 100.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001280 */
Patrick Gefre6cb28752005-05-01 08:59:21 -07001281 threshold = timeout * port->ip_baud / 4000;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001282 if (threshold == 0)
1283 threshold = 1; /* otherwise we'll intr all the time! */
1284
1285 if ((unsigned)threshold > (unsigned)IOC4_SSCR_RX_THRESHOLD)
1286 return 1;
1287
1288 port->ip_sscr &= ~IOC4_SSCR_RX_THRESHOLD;
1289 port->ip_sscr |= threshold;
1290
1291 writel(port->ip_sscr, &port->ip_serial_regs->sscr);
1292
Patrick Gefre6cb28752005-05-01 08:59:21 -07001293 /* Now set the rx timeout to the given value
1294 * again timeout * IOC4_SRTR_HZ / HZ
1295 */
1296 timeout = timeout * IOC4_SRTR_HZ / 100;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001297 if (timeout > IOC4_SRTR_CNT)
1298 timeout = IOC4_SRTR_CNT;
1299
1300 writel(timeout, &port->ip_serial_regs->srtr);
1301 return 0;
1302}
1303
1304/**
1305 * config_port - config the hardware
1306 * @port: port to config
1307 * @baud: baud rate for the port
1308 * @byte_size: data size
1309 * @stop_bits: number of stop bits
1310 * @parenb: parity enable ?
1311 * @parodd: odd parity ?
1312 */
1313static inline int
1314config_port(struct ioc4_port *port,
1315 int baud, int byte_size, int stop_bits, int parenb, int parodd)
1316{
1317 char lcr, sizebits;
1318 int spiniter = 0;
1319
1320 DPRINT_CONFIG(("%s: baud %d byte_size %d stop %d parenb %d parodd %d\n",
Harvey Harrison71cc2c22008-04-30 00:55:10 -07001321 __func__, baud, byte_size, stop_bits, parenb, parodd));
Linus Torvalds1da177e2005-04-16 15:20:36 -07001322
1323 if (set_baud(port, baud))
1324 return 1;
1325
1326 switch (byte_size) {
1327 case 5:
1328 sizebits = UART_LCR_WLEN5;
1329 break;
1330 case 6:
1331 sizebits = UART_LCR_WLEN6;
1332 break;
1333 case 7:
1334 sizebits = UART_LCR_WLEN7;
1335 break;
1336 case 8:
1337 sizebits = UART_LCR_WLEN8;
1338 break;
1339 default:
1340 return 1;
1341 }
1342
1343 /* Pause the DMA interface if necessary */
1344 if (port->ip_sscr & IOC4_SSCR_DMA_EN) {
1345 writel(port->ip_sscr | IOC4_SSCR_DMA_PAUSE,
1346 &port->ip_serial_regs->sscr);
1347 while((readl(&port->ip_serial_regs->sscr)
1348 & IOC4_SSCR_PAUSE_STATE) == 0) {
1349 spiniter++;
1350 if (spiniter > MAXITER)
1351 return -1;
1352 }
1353 }
1354
1355 /* Clear relevant fields in lcr */
1356 lcr = readb(&port->ip_uart_regs->i4u_lcr);
1357 lcr &= ~(LCR_MASK_BITS_CHAR | UART_LCR_EPAR |
1358 UART_LCR_PARITY | LCR_MASK_STOP_BITS);
1359
1360 /* Set byte size in lcr */
1361 lcr |= sizebits;
1362
1363 /* Set parity */
1364 if (parenb) {
1365 lcr |= UART_LCR_PARITY;
1366 if (!parodd)
1367 lcr |= UART_LCR_EPAR;
1368 }
1369
1370 /* Set stop bits */
1371 if (stop_bits)
1372 lcr |= UART_LCR_STOP /* 2 stop bits */ ;
1373
1374 writeb(lcr, &port->ip_uart_regs->i4u_lcr);
1375
1376 /* Re-enable the DMA interface if necessary */
1377 if (port->ip_sscr & IOC4_SSCR_DMA_EN) {
1378 writel(port->ip_sscr, &port->ip_serial_regs->sscr);
1379 }
1380 port->ip_baud = baud;
1381
1382 /* When we get within this number of ring entries of filling the
1383 * entire ring on tx, place an EXPLICIT intr to generate a lowat
1384 * notification when output has drained.
1385 */
1386 port->ip_tx_lowat = (TX_LOWAT_CHARS(baud) + 3) / 4;
1387 if (port->ip_tx_lowat == 0)
1388 port->ip_tx_lowat = 1;
1389
Patrick Gefre6cb28752005-05-01 08:59:21 -07001390 set_rx_timeout(port, 2);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001391
1392 return 0;
1393}
1394
1395/**
1396 * do_write - Write bytes to the port. Returns the number of bytes
1397 * actually written. Called from transmit_chars
1398 * @port: port to use
1399 * @buf: the stuff to write
1400 * @len: how many bytes in 'buf'
1401 */
1402static inline int do_write(struct ioc4_port *port, char *buf, int len)
1403{
1404 int prod_ptr, cons_ptr, total = 0;
1405 struct ring *outring;
1406 struct ring_entry *entry;
1407 struct hooks *hooks = port->ip_hooks;
1408
1409 BUG_ON(!(len >= 0));
1410
1411 prod_ptr = port->ip_tx_prod;
1412 cons_ptr = readl(&port->ip_serial_regs->stcir) & PROD_CONS_MASK;
1413 outring = port->ip_outring;
1414
1415 /* Maintain a 1-entry red-zone. The ring buffer is full when
1416 * (cons - prod) % ring_size is 1. Rather than do this subtraction
1417 * in the body of the loop, I'll do it now.
1418 */
1419 cons_ptr = (cons_ptr - (int)sizeof(struct ring_entry)) & PROD_CONS_MASK;
1420
1421 /* Stuff the bytes into the output */
1422 while ((prod_ptr != cons_ptr) && (len > 0)) {
1423 int xx;
1424
1425 /* Get 4 bytes (one ring entry) at a time */
1426 entry = (struct ring_entry *)((caddr_t) outring + prod_ptr);
1427
1428 /* Invalidate all entries */
1429 entry->ring_allsc = 0;
1430
1431 /* Copy in some bytes */
1432 for (xx = 0; (xx < 4) && (len > 0); xx++) {
1433 entry->ring_data[xx] = *buf++;
1434 entry->ring_sc[xx] = IOC4_TXCB_VALID;
1435 len--;
1436 total++;
1437 }
1438
1439 /* If we are within some small threshold of filling up the
1440 * entire ring buffer, we must place an EXPLICIT intr here
1441 * to generate a lowat interrupt in case we subsequently
1442 * really do fill up the ring and the caller goes to sleep.
1443 * No need to place more than one though.
1444 */
1445 if (!(port->ip_flags & LOWAT_WRITTEN) &&
1446 ((cons_ptr - prod_ptr) & PROD_CONS_MASK)
1447 <= port->ip_tx_lowat
1448 * (int)sizeof(struct ring_entry)) {
1449 port->ip_flags |= LOWAT_WRITTEN;
1450 entry->ring_sc[0] |= IOC4_TXCB_INT_WHEN_DONE;
1451 }
1452
1453 /* Go on to next entry */
1454 prod_ptr += sizeof(struct ring_entry);
1455 prod_ptr &= PROD_CONS_MASK;
1456 }
1457
1458 /* If we sent something, start DMA if necessary */
1459 if (total > 0 && !(port->ip_sscr & IOC4_SSCR_DMA_EN)) {
1460 port->ip_sscr |= IOC4_SSCR_DMA_EN;
1461 writel(port->ip_sscr, &port->ip_serial_regs->sscr);
1462 }
1463
1464 /* Store the new producer pointer. If tx is disabled, we stuff the
1465 * data into the ring buffer, but we don't actually start tx.
1466 */
1467 if (!uart_tx_stopped(port->ip_port)) {
1468 writel(prod_ptr, &port->ip_serial_regs->stpir);
1469
1470 /* If we are now transmitting, enable tx_mt interrupt so we
1471 * can disable DMA if necessary when the tx finishes.
1472 */
1473 if (total > 0)
1474 enable_intrs(port, hooks->intr_tx_mt);
1475 }
1476 port->ip_tx_prod = prod_ptr;
1477 return total;
1478}
1479
1480/**
1481 * disable_intrs - disable interrupts
1482 * @port: port to enable
1483 * @mask: mask to use
1484 */
1485static void disable_intrs(struct ioc4_port *port, uint32_t mask)
1486{
1487 struct hooks *hooks = port->ip_hooks;
1488
1489 if (port->ip_ienb & mask) {
1490 write_ireg(port->ip_ioc4_soft, mask, IOC4_W_IEC,
1491 IOC4_SIO_INTR_TYPE);
1492 port->ip_ienb &= ~mask;
1493 }
1494
1495 if (!port->ip_ienb)
1496 write_ireg(port->ip_ioc4_soft, hooks->intr_dma_error,
1497 IOC4_W_IEC, IOC4_OTHER_INTR_TYPE);
1498}
1499
1500/**
1501 * set_notification - Modify event notification
1502 * @port: port to use
1503 * @mask: events mask
1504 * @set_on: set ?
1505 */
1506static int set_notification(struct ioc4_port *port, int mask, int set_on)
1507{
1508 struct hooks *hooks = port->ip_hooks;
1509 uint32_t intrbits, sscrbits;
1510
1511 BUG_ON(!mask);
1512
1513 intrbits = sscrbits = 0;
1514
1515 if (mask & N_DATA_READY)
1516 intrbits |= (hooks->intr_rx_timer | hooks->intr_rx_high);
1517 if (mask & N_OUTPUT_LOWAT)
1518 intrbits |= hooks->intr_tx_explicit;
1519 if (mask & N_DDCD) {
1520 intrbits |= hooks->intr_delta_dcd;
1521 sscrbits |= IOC4_SSCR_RX_RING_DCD;
1522 }
1523 if (mask & N_DCTS)
1524 intrbits |= hooks->intr_delta_cts;
1525
1526 if (set_on) {
1527 enable_intrs(port, intrbits);
1528 port->ip_notify |= mask;
1529 port->ip_sscr |= sscrbits;
1530 } else {
1531 disable_intrs(port, intrbits);
1532 port->ip_notify &= ~mask;
1533 port->ip_sscr &= ~sscrbits;
1534 }
1535
1536 /* We require DMA if either DATA_READY or DDCD notification is
1537 * currently requested. If neither of these is requested and
1538 * there is currently no tx in progress, DMA may be disabled.
1539 */
1540 if (port->ip_notify & (N_DATA_READY | N_DDCD))
1541 port->ip_sscr |= IOC4_SSCR_DMA_EN;
1542 else if (!(port->ip_ienb & hooks->intr_tx_mt))
1543 port->ip_sscr &= ~IOC4_SSCR_DMA_EN;
1544
1545 writel(port->ip_sscr, &port->ip_serial_regs->sscr);
1546 return 0;
1547}
1548
1549/**
1550 * set_mcr - set the master control reg
1551 * @the_port: port to use
Linus Torvalds1da177e2005-04-16 15:20:36 -07001552 * @mask1: mcr mask
1553 * @mask2: shadow mask
1554 */
Pat Gefre64b91372006-03-25 03:08:07 -08001555static inline int set_mcr(struct uart_port *the_port,
Linus Torvalds1da177e2005-04-16 15:20:36 -07001556 int mask1, int mask2)
1557{
Pat Gefre64b91372006-03-25 03:08:07 -08001558 struct ioc4_port *port = get_ioc4_port(the_port, 0);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001559 uint32_t shadow;
1560 int spiniter = 0;
1561 char mcr;
1562
1563 if (!port)
1564 return -1;
1565
1566 /* Pause the DMA interface if necessary */
1567 if (port->ip_sscr & IOC4_SSCR_DMA_EN) {
1568 writel(port->ip_sscr | IOC4_SSCR_DMA_PAUSE,
1569 &port->ip_serial_regs->sscr);
1570 while ((readl(&port->ip_serial_regs->sscr)
1571 & IOC4_SSCR_PAUSE_STATE) == 0) {
1572 spiniter++;
1573 if (spiniter > MAXITER)
1574 return -1;
1575 }
1576 }
1577 shadow = readl(&port->ip_serial_regs->shadow);
1578 mcr = (shadow & 0xff000000) >> 24;
1579
1580 /* Set new value */
Pat Gefre64b91372006-03-25 03:08:07 -08001581 mcr |= mask1;
1582 shadow |= mask2;
1583
Linus Torvalds1da177e2005-04-16 15:20:36 -07001584 writeb(mcr, &port->ip_uart_regs->i4u_mcr);
1585 writel(shadow, &port->ip_serial_regs->shadow);
1586
1587 /* Re-enable the DMA interface if necessary */
1588 if (port->ip_sscr & IOC4_SSCR_DMA_EN) {
1589 writel(port->ip_sscr, &port->ip_serial_regs->sscr);
1590 }
1591 return 0;
1592}
1593
1594/**
1595 * ioc4_set_proto - set the protocol for the port
1596 * @port: port to use
1597 * @proto: protocol to use
1598 */
Pat Gefre64b91372006-03-25 03:08:07 -08001599static int ioc4_set_proto(struct ioc4_port *port, int proto)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001600{
1601 struct hooks *hooks = port->ip_hooks;
1602
1603 switch (proto) {
1604 case PROTO_RS232:
1605 /* Clear the appropriate GIO pin */
Brent Casavant22329b52005-06-21 17:15:59 -07001606 writel(0, (&port->ip_mem->gppr[hooks->rs422_select_pin].raw));
Linus Torvalds1da177e2005-04-16 15:20:36 -07001607 break;
1608
1609 case PROTO_RS422:
1610 /* Set the appropriate GIO pin */
Brent Casavant22329b52005-06-21 17:15:59 -07001611 writel(1, (&port->ip_mem->gppr[hooks->rs422_select_pin].raw));
Linus Torvalds1da177e2005-04-16 15:20:36 -07001612 break;
1613
1614 default:
1615 return 1;
1616 }
1617 return 0;
1618}
1619
1620/**
1621 * transmit_chars - upper level write, called with ip_lock
1622 * @the_port: port to write
1623 */
1624static void transmit_chars(struct uart_port *the_port)
1625{
1626 int xmit_count, tail, head;
1627 int result;
1628 char *start;
1629 struct tty_struct *tty;
Pat Gefre64b91372006-03-25 03:08:07 -08001630 struct ioc4_port *port = get_ioc4_port(the_port, 0);
Alan Coxebd2c8f2009-09-19 13:13:28 -07001631 struct uart_state *state;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001632
1633 if (!the_port)
1634 return;
1635 if (!port)
1636 return;
1637
Alan Coxebd2c8f2009-09-19 13:13:28 -07001638 state = the_port->state;
1639 tty = state->port.tty;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001640
Alan Coxebd2c8f2009-09-19 13:13:28 -07001641 if (uart_circ_empty(&state->xmit) || uart_tx_stopped(the_port)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001642 /* Nothing to do or hw stopped */
1643 set_notification(port, N_ALL_OUTPUT, 0);
1644 return;
1645 }
1646
Alan Coxebd2c8f2009-09-19 13:13:28 -07001647 head = state->xmit.head;
1648 tail = state->xmit.tail;
1649 start = (char *)&state->xmit.buf[tail];
Linus Torvalds1da177e2005-04-16 15:20:36 -07001650
1651 /* write out all the data or until the end of the buffer */
1652 xmit_count = (head < tail) ? (UART_XMIT_SIZE - tail) : (head - tail);
1653 if (xmit_count > 0) {
1654 result = do_write(port, start, xmit_count);
1655 if (result > 0) {
1656 /* booking */
1657 xmit_count -= result;
1658 the_port->icount.tx += result;
1659 /* advance the pointers */
1660 tail += result;
1661 tail &= UART_XMIT_SIZE - 1;
Alan Coxebd2c8f2009-09-19 13:13:28 -07001662 state->xmit.tail = tail;
1663 start = (char *)&state->xmit.buf[tail];
Linus Torvalds1da177e2005-04-16 15:20:36 -07001664 }
1665 }
Alan Coxebd2c8f2009-09-19 13:13:28 -07001666 if (uart_circ_chars_pending(&state->xmit) < WAKEUP_CHARS)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001667 uart_write_wakeup(the_port);
1668
Alan Coxebd2c8f2009-09-19 13:13:28 -07001669 if (uart_circ_empty(&state->xmit)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001670 set_notification(port, N_OUTPUT_LOWAT, 0);
1671 } else {
1672 set_notification(port, N_OUTPUT_LOWAT, 1);
1673 }
1674}
1675
1676/**
1677 * ioc4_change_speed - change the speed of the port
1678 * @the_port: port to change
1679 * @new_termios: new termios settings
1680 * @old_termios: old termios settings
1681 */
1682static void
1683ioc4_change_speed(struct uart_port *the_port,
Alan Cox606d0992006-12-08 02:38:45 -08001684 struct ktermios *new_termios, struct ktermios *old_termios)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001685{
Pat Gefre64b91372006-03-25 03:08:07 -08001686 struct ioc4_port *port = get_ioc4_port(the_port, 0);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001687 int baud, bits;
Alan Coxeab4f5a2010-06-01 22:52:52 +02001688 unsigned cflag, iflag;
Patrick Gefre68985e42005-05-01 08:59:21 -07001689 int new_parity = 0, new_parity_enable = 0, new_stop = 0, new_data = 8;
Alan Coxebd2c8f2009-09-19 13:13:28 -07001690 struct uart_state *state = the_port->state;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001691
1692 cflag = new_termios->c_cflag;
Alan Coxeab4f5a2010-06-01 22:52:52 +02001693 iflag = new_termios->c_iflag;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001694
1695 switch (cflag & CSIZE) {
1696 case CS5:
1697 new_data = 5;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001698 bits = 7;
1699 break;
1700 case CS6:
1701 new_data = 6;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001702 bits = 8;
1703 break;
1704 case CS7:
1705 new_data = 7;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001706 bits = 9;
1707 break;
1708 case CS8:
1709 new_data = 8;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001710 bits = 10;
1711 break;
1712 default:
1713 /* cuz we always need a default ... */
1714 new_data = 5;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001715 bits = 7;
1716 break;
1717 }
1718 if (cflag & CSTOPB) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001719 bits++;
1720 new_stop = 1;
1721 }
1722 if (cflag & PARENB) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001723 bits++;
1724 new_parity_enable = 1;
Patrick Gefre68985e42005-05-01 08:59:21 -07001725 if (cflag & PARODD)
1726 new_parity = 1;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001727 }
1728 baud = uart_get_baud_rate(the_port, new_termios, old_termios,
1729 MIN_BAUD_SUPPORTED, MAX_BAUD_SUPPORTED);
Harvey Harrison71cc2c22008-04-30 00:55:10 -07001730 DPRINT_CONFIG(("%s: returned baud %d\n", __func__, baud));
Linus Torvalds1da177e2005-04-16 15:20:36 -07001731
1732 /* default is 9600 */
1733 if (!baud)
1734 baud = 9600;
1735
1736 if (!the_port->fifosize)
Pat Gefre396dc442005-10-30 15:02:49 -08001737 the_port->fifosize = IOC4_FIFO_CHARS;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001738 the_port->timeout = ((the_port->fifosize * HZ * bits) / (baud / 10));
1739 the_port->timeout += HZ / 50; /* Add .02 seconds of slop */
1740
1741 the_port->ignore_status_mask = N_ALL_INPUT;
1742
Alan Coxebd2c8f2009-09-19 13:13:28 -07001743 state->port.tty->low_latency = 1;
Pat Gefre396dc442005-10-30 15:02:49 -08001744
Alan Coxeab4f5a2010-06-01 22:52:52 +02001745 if (iflag & IGNPAR)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001746 the_port->ignore_status_mask &= ~(N_PARITY_ERROR
1747 | N_FRAMING_ERROR);
Alan Coxeab4f5a2010-06-01 22:52:52 +02001748 if (iflag & IGNBRK) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001749 the_port->ignore_status_mask &= ~N_BREAK;
Alan Coxeab4f5a2010-06-01 22:52:52 +02001750 if (iflag & IGNPAR)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001751 the_port->ignore_status_mask &= ~N_OVERRUN_ERROR;
1752 }
1753 if (!(cflag & CREAD)) {
1754 /* ignore everything */
1755 the_port->ignore_status_mask &= ~N_DATA_READY;
1756 }
1757
Patrick Gefre149733d2005-05-01 08:59:21 -07001758 if (cflag & CRTSCTS) {
Patrick Gefre149733d2005-05-01 08:59:21 -07001759 port->ip_sscr |= IOC4_SSCR_HFC_EN;
Patrick Gefre149733d2005-05-01 08:59:21 -07001760 }
Patrick Gefre68985e42005-05-01 08:59:21 -07001761 else {
Patrick Gefre68985e42005-05-01 08:59:21 -07001762 port->ip_sscr &= ~IOC4_SSCR_HFC_EN;
1763 }
1764 writel(port->ip_sscr, &port->ip_serial_regs->sscr);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001765
1766 /* Set the configuration and proper notification call */
1767 DPRINT_CONFIG(("%s : port 0x%p cflag 0%o "
1768 "config_port(baud %d data %d stop %d p enable %d parity %d),"
1769 " notification 0x%x\n",
Harvey Harrison71cc2c22008-04-30 00:55:10 -07001770 __func__, (void *)port, cflag, baud, new_data, new_stop,
Linus Torvalds1da177e2005-04-16 15:20:36 -07001771 new_parity_enable, new_parity, the_port->ignore_status_mask));
1772
1773 if ((config_port(port, baud, /* baud */
1774 new_data, /* byte size */
1775 new_stop, /* stop bits */
1776 new_parity_enable, /* set parity */
1777 new_parity)) >= 0) { /* parity 1==odd */
1778 set_notification(port, the_port->ignore_status_mask, 1);
1779 }
1780}
1781
1782/**
1783 * ic4_startup_local - Start up the serial port - returns >= 0 if no errors
1784 * @the_port: Port to operate on
1785 */
1786static inline int ic4_startup_local(struct uart_port *the_port)
1787{
Linus Torvalds1da177e2005-04-16 15:20:36 -07001788 struct ioc4_port *port;
Alan Coxebd2c8f2009-09-19 13:13:28 -07001789 struct uart_state *state;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001790
1791 if (!the_port)
1792 return -1;
1793
Pat Gefre64b91372006-03-25 03:08:07 -08001794 port = get_ioc4_port(the_port, 0);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001795 if (!port)
1796 return -1;
1797
Alan Coxebd2c8f2009-09-19 13:13:28 -07001798 state = the_port->state;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001799
Linus Torvalds1da177e2005-04-16 15:20:36 -07001800 local_open(port);
1801
Pat Gefre64b91372006-03-25 03:08:07 -08001802 /* set the protocol - mapbase has the port type */
1803 ioc4_set_proto(port, the_port->mapbase);
1804
Linus Torvalds1da177e2005-04-16 15:20:36 -07001805 /* set the speed of the serial port */
Alan Coxebd2c8f2009-09-19 13:13:28 -07001806 ioc4_change_speed(the_port, state->port.tty->termios,
Takashi Iwaia88487c2008-07-16 21:54:42 +01001807 (struct ktermios *)0);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001808
Linus Torvalds1da177e2005-04-16 15:20:36 -07001809 return 0;
1810}
1811
1812/*
1813 * ioc4_cb_output_lowat - called when the output low water mark is hit
Pat Gefre64b91372006-03-25 03:08:07 -08001814 * @the_port: port to output
Linus Torvalds1da177e2005-04-16 15:20:36 -07001815 */
Pat Gefre64b91372006-03-25 03:08:07 -08001816static void ioc4_cb_output_lowat(struct uart_port *the_port)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001817{
Pat Gefre396dc442005-10-30 15:02:49 -08001818 unsigned long pflags;
1819
Linus Torvalds1da177e2005-04-16 15:20:36 -07001820 /* ip_lock is set on the call here */
Pat Gefre64b91372006-03-25 03:08:07 -08001821 if (the_port) {
1822 spin_lock_irqsave(&the_port->lock, pflags);
1823 transmit_chars(the_port);
1824 spin_unlock_irqrestore(&the_port->lock, pflags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001825 }
1826}
1827
Linus Torvalds1da177e2005-04-16 15:20:36 -07001828/**
1829 * handle_intr - service any interrupts for the given port - 2nd level
1830 * called via sd_intr
1831 * @arg: handler arg
1832 * @sio_ir: ioc4regs
1833 */
1834static void handle_intr(void *arg, uint32_t sio_ir)
1835{
1836 struct ioc4_port *port = (struct ioc4_port *)arg;
1837 struct hooks *hooks = port->ip_hooks;
1838 unsigned int rx_high_rd_aborted = 0;
Andrew Mortona5a89ba2006-10-29 22:46:33 -08001839 unsigned long flags;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001840 struct uart_port *the_port;
1841 int loop_counter;
1842
1843 /* Possible race condition here: The tx_mt interrupt bit may be
1844 * cleared without the intervention of the interrupt handler,
1845 * e.g. by a write. If the top level interrupt handler reads a
1846 * tx_mt, then some other processor does a write, starting up
1847 * output, then we come in here, see the tx_mt and stop DMA, the
1848 * output started by the other processor will hang. Thus we can
1849 * only rely on tx_mt being legitimate if it is read while the
1850 * port lock is held. Therefore this bit must be ignored in the
1851 * passed in interrupt mask which was read by the top level
1852 * interrupt handler since the port lock was not held at the time
1853 * it was read. We can only rely on this bit being accurate if it
1854 * is read while the port lock is held. So we'll clear it for now,
1855 * and reload it later once we have the port lock.
1856 */
1857 sio_ir &= ~(hooks->intr_tx_mt);
1858
1859 spin_lock_irqsave(&port->ip_lock, flags);
1860
1861 loop_counter = MAXITER; /* to avoid hangs */
1862
1863 do {
1864 uint32_t shadow;
1865
1866 if ( loop_counter-- <= 0 ) {
1867 printk(KERN_WARNING "IOC4 serial: "
1868 "possible hang condition/"
1869 "port stuck on interrupt.\n");
1870 break;
1871 }
1872
1873 /* Handle a DCD change */
1874 if (sio_ir & hooks->intr_delta_dcd) {
1875 /* ACK the interrupt */
1876 writel(hooks->intr_delta_dcd,
Brent Casavant22329b52005-06-21 17:15:59 -07001877 &port->ip_mem->sio_ir.raw);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001878
1879 shadow = readl(&port->ip_serial_regs->shadow);
1880
1881 if ((port->ip_notify & N_DDCD)
1882 && (shadow & IOC4_SHADOW_DCD)
1883 && (port->ip_port)) {
1884 the_port = port->ip_port;
1885 the_port->icount.dcd = 1;
1886 wake_up_interruptible
Alan Coxbdc04e32009-09-19 13:13:31 -07001887 (&the_port->state->port.delta_msr_wait);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001888 } else if ((port->ip_notify & N_DDCD)
1889 && !(shadow & IOC4_SHADOW_DCD)) {
1890 /* Flag delta DCD/no DCD */
1891 port->ip_flags |= DCD_ON;
1892 }
1893 }
1894
1895 /* Handle a CTS change */
1896 if (sio_ir & hooks->intr_delta_cts) {
1897 /* ACK the interrupt */
1898 writel(hooks->intr_delta_cts,
Brent Casavant22329b52005-06-21 17:15:59 -07001899 &port->ip_mem->sio_ir.raw);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001900
1901 shadow = readl(&port->ip_serial_regs->shadow);
1902
1903 if ((port->ip_notify & N_DCTS)
1904 && (port->ip_port)) {
1905 the_port = port->ip_port;
1906 the_port->icount.cts =
1907 (shadow & IOC4_SHADOW_CTS) ? 1 : 0;
1908 wake_up_interruptible
Alan Coxbdc04e32009-09-19 13:13:31 -07001909 (&the_port->state->port.delta_msr_wait);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001910 }
1911 }
1912
1913 /* rx timeout interrupt. Must be some data available. Put this
1914 * before the check for rx_high since servicing this condition
1915 * may cause that condition to clear.
1916 */
1917 if (sio_ir & hooks->intr_rx_timer) {
1918 /* ACK the interrupt */
1919 writel(hooks->intr_rx_timer,
Brent Casavant22329b52005-06-21 17:15:59 -07001920 &port->ip_mem->sio_ir.raw);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001921
1922 if ((port->ip_notify & N_DATA_READY)
1923 && (port->ip_port)) {
1924 /* ip_lock is set on call here */
1925 receive_chars(port->ip_port);
1926 }
1927 }
1928
1929 /* rx high interrupt. Must be after rx_timer. */
1930 else if (sio_ir & hooks->intr_rx_high) {
1931 /* Data available, notify upper layer */
1932 if ((port->ip_notify & N_DATA_READY)
1933 && port->ip_port) {
1934 /* ip_lock is set on call here */
1935 receive_chars(port->ip_port);
1936 }
1937
1938 /* We can't ACK this interrupt. If receive_chars didn't
1939 * cause the condition to clear, we'll have to disable
1940 * the interrupt until the data is drained.
1941 * If the read was aborted, don't disable the interrupt
1942 * as this may cause us to hang indefinitely. An
1943 * aborted read generally means that this interrupt
1944 * hasn't been delivered to the cpu yet anyway, even
1945 * though we see it as asserted when we read the sio_ir.
1946 */
1947 if ((sio_ir = PENDING(port)) & hooks->intr_rx_high) {
1948 if ((port->ip_flags & READ_ABORTED) == 0) {
1949 port->ip_ienb &= ~hooks->intr_rx_high;
1950 port->ip_flags |= INPUT_HIGH;
1951 } else {
1952 rx_high_rd_aborted++;
1953 }
1954 }
1955 }
1956
1957 /* We got a low water interrupt: notify upper layer to
1958 * send more data. Must come before tx_mt since servicing
1959 * this condition may cause that condition to clear.
1960 */
1961 if (sio_ir & hooks->intr_tx_explicit) {
1962 port->ip_flags &= ~LOWAT_WRITTEN;
1963
1964 /* ACK the interrupt */
1965 writel(hooks->intr_tx_explicit,
Brent Casavant22329b52005-06-21 17:15:59 -07001966 &port->ip_mem->sio_ir.raw);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001967
1968 if (port->ip_notify & N_OUTPUT_LOWAT)
Pat Gefre64b91372006-03-25 03:08:07 -08001969 ioc4_cb_output_lowat(port->ip_port);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001970 }
1971
1972 /* Handle tx_mt. Must come after tx_explicit. */
1973 else if (sio_ir & hooks->intr_tx_mt) {
1974 /* If we are expecting a lowat notification
1975 * and we get to this point it probably means that for
1976 * some reason the tx_explicit didn't work as expected
1977 * (that can legitimately happen if the output buffer is
1978 * filled up in just the right way).
1979 * So send the notification now.
1980 */
1981 if (port->ip_notify & N_OUTPUT_LOWAT) {
Pat Gefre64b91372006-03-25 03:08:07 -08001982 ioc4_cb_output_lowat(port->ip_port);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001983
1984 /* We need to reload the sio_ir since the lowat
1985 * call may have caused another write to occur,
1986 * clearing the tx_mt condition.
1987 */
1988 sio_ir = PENDING(port);
1989 }
1990
1991 /* If the tx_mt condition still persists even after the
1992 * lowat call, we've got some work to do.
1993 */
1994 if (sio_ir & hooks->intr_tx_mt) {
1995
1996 /* If we are not currently expecting DMA input,
1997 * and the transmitter has just gone idle,
1998 * there is no longer any reason for DMA, so
1999 * disable it.
2000 */
2001 if (!(port->ip_notify
2002 & (N_DATA_READY | N_DDCD))) {
2003 BUG_ON(!(port->ip_sscr
2004 & IOC4_SSCR_DMA_EN));
2005 port->ip_sscr &= ~IOC4_SSCR_DMA_EN;
2006 writel(port->ip_sscr,
2007 &port->ip_serial_regs->sscr);
2008 }
2009
2010 /* Prevent infinite tx_mt interrupt */
2011 port->ip_ienb &= ~hooks->intr_tx_mt;
2012 }
2013 }
2014 sio_ir = PENDING(port);
2015
2016 /* if the read was aborted and only hooks->intr_rx_high,
2017 * clear hooks->intr_rx_high, so we do not loop forever.
2018 */
2019
2020 if (rx_high_rd_aborted && (sio_ir == hooks->intr_rx_high)) {
2021 sio_ir &= ~hooks->intr_rx_high;
2022 }
2023 } while (sio_ir & hooks->intr_all);
2024
2025 spin_unlock_irqrestore(&port->ip_lock, flags);
2026
2027 /* Re-enable interrupts before returning from interrupt handler.
2028 * Getting interrupted here is okay. It'll just v() our semaphore, and
2029 * we'll come through the loop again.
2030 */
2031
2032 write_ireg(port->ip_ioc4_soft, port->ip_ienb, IOC4_W_IES,
2033 IOC4_SIO_INTR_TYPE);
2034}
2035
2036/*
2037 * ioc4_cb_post_ncs - called for some basic errors
2038 * @port: port to use
2039 * @ncs: event
2040 */
2041static void ioc4_cb_post_ncs(struct uart_port *the_port, int ncs)
2042{
2043 struct uart_icount *icount;
2044
2045 icount = &the_port->icount;
2046
2047 if (ncs & NCS_BREAK)
2048 icount->brk++;
2049 if (ncs & NCS_FRAMING)
2050 icount->frame++;
2051 if (ncs & NCS_OVERRUN)
2052 icount->overrun++;
2053 if (ncs & NCS_PARITY)
2054 icount->parity++;
2055}
2056
2057/**
2058 * do_read - Read in bytes from the port. Return the number of bytes
2059 * actually read.
2060 * @the_port: port to use
2061 * @buf: place to put the stuff we read
2062 * @len: how big 'buf' is
2063 */
2064
2065static inline int do_read(struct uart_port *the_port, unsigned char *buf,
2066 int len)
2067{
2068 int prod_ptr, cons_ptr, total;
Pat Gefre64b91372006-03-25 03:08:07 -08002069 struct ioc4_port *port = get_ioc4_port(the_port, 0);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002070 struct ring *inring;
2071 struct ring_entry *entry;
2072 struct hooks *hooks = port->ip_hooks;
2073 int byte_num;
2074 char *sc;
2075 int loop_counter;
2076
2077 BUG_ON(!(len >= 0));
2078 BUG_ON(!port);
2079
2080 /* There is a nasty timing issue in the IOC4. When the rx_timer
2081 * expires or the rx_high condition arises, we take an interrupt.
2082 * At some point while servicing the interrupt, we read bytes from
2083 * the ring buffer and re-arm the rx_timer. However the rx_timer is
2084 * not started until the first byte is received *after* it is armed,
2085 * and any bytes pending in the rx construction buffers are not drained
2086 * to memory until either there are 4 bytes available or the rx_timer
2087 * expires. This leads to a potential situation where data is left
2088 * in the construction buffers forever - 1 to 3 bytes were received
2089 * after the interrupt was generated but before the rx_timer was
2090 * re-armed. At that point as long as no subsequent bytes are received
2091 * the timer will never be started and the bytes will remain in the
2092 * construction buffer forever. The solution is to execute a DRAIN
2093 * command after rearming the timer. This way any bytes received before
2094 * the DRAIN will be drained to memory, and any bytes received after
2095 * the DRAIN will start the TIMER and be drained when it expires.
2096 * Luckily, this only needs to be done when the DMA buffer is empty
2097 * since there is no requirement that this function return all
2098 * available data as long as it returns some.
2099 */
2100 /* Re-arm the timer */
Pat Gefre396dc442005-10-30 15:02:49 -08002101 writel(port->ip_rx_cons | IOC4_SRCIR_ARM, &port->ip_serial_regs->srcir);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002102
2103 prod_ptr = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK;
2104 cons_ptr = port->ip_rx_cons;
2105
2106 if (prod_ptr == cons_ptr) {
2107 int reset_dma = 0;
2108
2109 /* Input buffer appears empty, do a flush. */
2110
2111 /* DMA must be enabled for this to work. */
2112 if (!(port->ip_sscr & IOC4_SSCR_DMA_EN)) {
2113 port->ip_sscr |= IOC4_SSCR_DMA_EN;
2114 reset_dma = 1;
2115 }
2116
2117 /* Potential race condition: we must reload the srpir after
2118 * issuing the drain command, otherwise we could think the rx
2119 * buffer is empty, then take a very long interrupt, and when
2120 * we come back it's full and we wait forever for the drain to
2121 * complete.
2122 */
2123 writel(port->ip_sscr | IOC4_SSCR_RX_DRAIN,
2124 &port->ip_serial_regs->sscr);
2125 prod_ptr = readl(&port->ip_serial_regs->srpir)
2126 & PROD_CONS_MASK;
2127
2128 /* We must not wait for the DRAIN to complete unless there are
2129 * at least 8 bytes (2 ring entries) available to receive the
2130 * data otherwise the DRAIN will never complete and we'll
2131 * deadlock here.
2132 * In fact, to make things easier, I'll just ignore the flush if
2133 * there is any data at all now available.
2134 */
2135 if (prod_ptr == cons_ptr) {
2136 loop_counter = 0;
2137 while (readl(&port->ip_serial_regs->sscr) &
2138 IOC4_SSCR_RX_DRAIN) {
2139 loop_counter++;
2140 if (loop_counter > MAXITER)
2141 return -1;
2142 }
2143
2144 /* SIGH. We have to reload the prod_ptr *again* since
2145 * the drain may have caused it to change
2146 */
2147 prod_ptr = readl(&port->ip_serial_regs->srpir)
2148 & PROD_CONS_MASK;
2149 }
2150 if (reset_dma) {
2151 port->ip_sscr &= ~IOC4_SSCR_DMA_EN;
2152 writel(port->ip_sscr, &port->ip_serial_regs->sscr);
2153 }
2154 }
2155 inring = port->ip_inring;
2156 port->ip_flags &= ~READ_ABORTED;
2157
2158 total = 0;
2159 loop_counter = 0xfffff; /* to avoid hangs */
2160
2161 /* Grab bytes from the hardware */
2162 while ((prod_ptr != cons_ptr) && (len > 0)) {
2163 entry = (struct ring_entry *)((caddr_t)inring + cons_ptr);
2164
2165 if ( loop_counter-- <= 0 ) {
2166 printk(KERN_WARNING "IOC4 serial: "
2167 "possible hang condition/"
2168 "port stuck on read.\n");
2169 break;
2170 }
2171
2172 /* According to the producer pointer, this ring entry
2173 * must contain some data. But if the PIO happened faster
2174 * than the DMA, the data may not be available yet, so let's
2175 * wait until it arrives.
2176 */
2177 if ((entry->ring_allsc & RING_ANY_VALID) == 0) {
2178 /* Indicate the read is aborted so we don't disable
2179 * the interrupt thinking that the consumer is
2180 * congested.
2181 */
2182 port->ip_flags |= READ_ABORTED;
2183 len = 0;
2184 break;
2185 }
2186
2187 /* Load the bytes/status out of the ring entry */
2188 for (byte_num = 0; byte_num < 4 && len > 0; byte_num++) {
2189 sc = &(entry->ring_sc[byte_num]);
2190
2191 /* Check for change in modem state or overrun */
2192 if ((*sc & IOC4_RXSB_MODEM_VALID)
2193 && (port->ip_notify & N_DDCD)) {
2194 /* Notify upper layer if DCD dropped */
2195
2196 if ((port->ip_flags & DCD_ON)
2197 && !(*sc & IOC4_RXSB_DCD)) {
2198
2199 /* If we have already copied some data,
2200 * return it. We'll pick up the carrier
2201 * drop on the next pass. That way we
2202 * don't throw away the data that has
2203 * already been copied back to
2204 * the caller's buffer.
2205 */
2206 if (total > 0) {
2207 len = 0;
2208 break;
2209 }
2210 port->ip_flags &= ~DCD_ON;
2211
2212 /* Turn off this notification so the
2213 * carrier drop protocol won't see it
2214 * again when it does a read.
2215 */
2216 *sc &= ~IOC4_RXSB_MODEM_VALID;
2217
2218 /* To keep things consistent, we need
2219 * to update the consumer pointer so
2220 * the next reader won't come in and
2221 * try to read the same ring entries
2222 * again. This must be done here before
2223 * the dcd change.
2224 */
2225
2226 if ((entry->ring_allsc & RING_ANY_VALID)
2227 == 0) {
2228 cons_ptr += (int)sizeof
2229 (struct ring_entry);
2230 cons_ptr &= PROD_CONS_MASK;
2231 }
2232 writel(cons_ptr,
2233 &port->ip_serial_regs->srcir);
2234 port->ip_rx_cons = cons_ptr;
2235
2236 /* Notify upper layer of carrier drop */
2237 if ((port->ip_notify & N_DDCD)
2238 && port->ip_port) {
2239 the_port->icount.dcd = 0;
2240 wake_up_interruptible
Alan Coxebd2c8f2009-09-19 13:13:28 -07002241 (&the_port->state->
Alan Coxbdc04e32009-09-19 13:13:31 -07002242 port.delta_msr_wait);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002243 }
2244
2245 /* If we had any data to return, we
2246 * would have returned it above.
2247 */
2248 return 0;
2249 }
2250 }
2251 if (*sc & IOC4_RXSB_MODEM_VALID) {
2252 /* Notify that an input overrun occurred */
2253 if ((*sc & IOC4_RXSB_OVERRUN)
2254 && (port->ip_notify & N_OVERRUN_ERROR)) {
2255 ioc4_cb_post_ncs(the_port, NCS_OVERRUN);
2256 }
2257 /* Don't look at this byte again */
2258 *sc &= ~IOC4_RXSB_MODEM_VALID;
2259 }
2260
2261 /* Check for valid data or RX errors */
2262 if ((*sc & IOC4_RXSB_DATA_VALID) &&
2263 ((*sc & (IOC4_RXSB_PAR_ERR
2264 | IOC4_RXSB_FRAME_ERR
2265 | IOC4_RXSB_BREAK))
2266 && (port->ip_notify & (N_PARITY_ERROR
2267 | N_FRAMING_ERROR
2268 | N_BREAK)))) {
2269 /* There is an error condition on the next byte.
2270 * If we have already transferred some bytes,
2271 * we'll stop here. Otherwise if this is the
2272 * first byte to be read, we'll just transfer
2273 * it alone after notifying the
2274 * upper layer of its status.
2275 */
2276 if (total > 0) {
2277 len = 0;
2278 break;
2279 } else {
2280 if ((*sc & IOC4_RXSB_PAR_ERR) &&
2281 (port->ip_notify & N_PARITY_ERROR)) {
2282 ioc4_cb_post_ncs(the_port,
2283 NCS_PARITY);
2284 }
2285 if ((*sc & IOC4_RXSB_FRAME_ERR) &&
2286 (port->ip_notify & N_FRAMING_ERROR)){
2287 ioc4_cb_post_ncs(the_port,
2288 NCS_FRAMING);
2289 }
2290 if ((*sc & IOC4_RXSB_BREAK)
2291 && (port->ip_notify & N_BREAK)) {
2292 ioc4_cb_post_ncs
2293 (the_port,
2294 NCS_BREAK);
2295 }
2296 len = 1;
2297 }
2298 }
2299 if (*sc & IOC4_RXSB_DATA_VALID) {
2300 *sc &= ~IOC4_RXSB_DATA_VALID;
2301 *buf = entry->ring_data[byte_num];
2302 buf++;
2303 len--;
2304 total++;
2305 }
2306 }
2307
2308 /* If we used up this entry entirely, go on to the next one,
2309 * otherwise we must have run out of buffer space, so
2310 * leave the consumer pointer here for the next read in case
2311 * there are still unread bytes in this entry.
2312 */
2313 if ((entry->ring_allsc & RING_ANY_VALID) == 0) {
2314 cons_ptr += (int)sizeof(struct ring_entry);
2315 cons_ptr &= PROD_CONS_MASK;
2316 }
2317 }
2318
2319 /* Update consumer pointer and re-arm rx timer interrupt */
2320 writel(cons_ptr, &port->ip_serial_regs->srcir);
2321 port->ip_rx_cons = cons_ptr;
2322
2323 /* If we have now dipped below the rx high water mark and we have
2324 * rx_high interrupt turned off, we can now turn it back on again.
2325 */
2326 if ((port->ip_flags & INPUT_HIGH) && (((prod_ptr - cons_ptr)
2327 & PROD_CONS_MASK) < ((port->ip_sscr &
2328 IOC4_SSCR_RX_THRESHOLD)
2329 << IOC4_PROD_CONS_PTR_OFF))) {
2330 port->ip_flags &= ~INPUT_HIGH;
2331 enable_intrs(port, hooks->intr_rx_high);
2332 }
2333 return total;
2334}
Pat Gefre396dc442005-10-30 15:02:49 -08002335
Linus Torvalds1da177e2005-04-16 15:20:36 -07002336/**
2337 * receive_chars - upper level read. Called with ip_lock.
2338 * @the_port: port to read from
2339 */
2340static void receive_chars(struct uart_port *the_port)
2341{
2342 struct tty_struct *tty;
2343 unsigned char ch[IOC4_MAX_CHARS];
Pat Gefre396dc442005-10-30 15:02:49 -08002344 int read_count, request_count = IOC4_MAX_CHARS;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002345 struct uart_icount *icount;
Alan Coxebd2c8f2009-09-19 13:13:28 -07002346 struct uart_state *state = the_port->state;
Pat Gefre396dc442005-10-30 15:02:49 -08002347 unsigned long pflags;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002348
2349 /* Make sure all the pointers are "good" ones */
Alan Coxebd2c8f2009-09-19 13:13:28 -07002350 if (!state)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002351 return;
Alan Coxebd2c8f2009-09-19 13:13:28 -07002352 if (!state->port.tty)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002353 return;
2354
Pat Gefre396dc442005-10-30 15:02:49 -08002355 spin_lock_irqsave(&the_port->lock, pflags);
Alan Coxebd2c8f2009-09-19 13:13:28 -07002356 tty = state->port.tty;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002357
Pat Gefre27d162e2006-03-11 03:27:17 -08002358 request_count = tty_buffer_request_room(tty, IOC4_MAX_CHARS);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002359
2360 if (request_count > 0) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002361 icount = &the_port->icount;
2362 read_count = do_read(the_port, ch, request_count);
2363 if (read_count > 0) {
Alan Cox33f0f882006-01-09 20:54:13 -08002364 tty_insert_flip_string(tty, ch, read_count);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002365 icount->rx += read_count;
2366 }
2367 }
Pat Gefre396dc442005-10-30 15:02:49 -08002368
2369 spin_unlock_irqrestore(&the_port->lock, pflags);
2370
Pat Gefre27d162e2006-03-11 03:27:17 -08002371 tty_flip_buffer_push(tty);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002372}
2373
2374/**
2375 * ic4_type - What type of console are we?
2376 * @port: Port to operate with (we ignore since we only have one port)
2377 *
2378 */
2379static const char *ic4_type(struct uart_port *the_port)
2380{
Pat Gefre64b91372006-03-25 03:08:07 -08002381 if (the_port->mapbase == PROTO_RS232)
2382 return "SGI IOC4 Serial [rs232]";
2383 else
2384 return "SGI IOC4 Serial [rs422]";
Linus Torvalds1da177e2005-04-16 15:20:36 -07002385}
2386
2387/**
Pat Gefre64b91372006-03-25 03:08:07 -08002388 * ic4_tx_empty - Is the transmitter empty?
2389 * @port: Port to operate on
Linus Torvalds1da177e2005-04-16 15:20:36 -07002390 *
2391 */
2392static unsigned int ic4_tx_empty(struct uart_port *the_port)
2393{
Pat Gefre64b91372006-03-25 03:08:07 -08002394 struct ioc4_port *port = get_ioc4_port(the_port, 0);
2395 unsigned int ret = 0;
2396
2397 if (port_is_active(port, the_port)) {
2398 if (readl(&port->ip_serial_regs->shadow) & IOC4_SHADOW_TEMT)
2399 ret = TIOCSER_TEMT;
2400 }
2401 return ret;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002402}
2403
2404/**
2405 * ic4_stop_tx - stop the transmitter
2406 * @port: Port to operate on
Linus Torvalds1da177e2005-04-16 15:20:36 -07002407 *
2408 */
Russell Kingb129a8c2005-08-31 10:12:14 +01002409static void ic4_stop_tx(struct uart_port *the_port)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002410{
Pat Gefre64b91372006-03-25 03:08:07 -08002411 struct ioc4_port *port = get_ioc4_port(the_port, 0);
2412
2413 if (port_is_active(port, the_port))
2414 set_notification(port, N_OUTPUT_LOWAT, 0);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002415}
2416
2417/**
2418 * null_void_function -
2419 * @port: Port to operate on
2420 *
2421 */
2422static void null_void_function(struct uart_port *the_port)
2423{
2424}
2425
2426/**
2427 * ic4_shutdown - shut down the port - free irq and disable
2428 * @port: Port to shut down
2429 *
2430 */
2431static void ic4_shutdown(struct uart_port *the_port)
2432{
2433 unsigned long port_flags;
2434 struct ioc4_port *port;
Alan Coxebd2c8f2009-09-19 13:13:28 -07002435 struct uart_state *state;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002436
Pat Gefre64b91372006-03-25 03:08:07 -08002437 port = get_ioc4_port(the_port, 0);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002438 if (!port)
2439 return;
2440
Alan Coxebd2c8f2009-09-19 13:13:28 -07002441 state = the_port->state;
Pat Gefre64b91372006-03-25 03:08:07 -08002442 port->ip_port = NULL;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002443
Alan Coxbdc04e32009-09-19 13:13:31 -07002444 wake_up_interruptible(&state->port.delta_msr_wait);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002445
Alan Coxebd2c8f2009-09-19 13:13:28 -07002446 if (state->port.tty)
2447 set_bit(TTY_IO_ERROR, &state->port.tty->flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002448
Pat Gefre396dc442005-10-30 15:02:49 -08002449 spin_lock_irqsave(&the_port->lock, port_flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002450 set_notification(port, N_ALL, 0);
Pat Gefre64b91372006-03-25 03:08:07 -08002451 port->ip_flags = PORT_INACTIVE;
Pat Gefre396dc442005-10-30 15:02:49 -08002452 spin_unlock_irqrestore(&the_port->lock, port_flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002453}
2454
2455/**
2456 * ic4_set_mctrl - set control lines (dtr, rts, etc)
2457 * @port: Port to operate on
2458 * @mctrl: Lines to set/unset
2459 *
2460 */
2461static void ic4_set_mctrl(struct uart_port *the_port, unsigned int mctrl)
2462{
2463 unsigned char mcr = 0;
Pat Gefre64b91372006-03-25 03:08:07 -08002464 struct ioc4_port *port;
2465
2466 port = get_ioc4_port(the_port, 0);
2467 if (!port_is_active(port, the_port))
2468 return;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002469
2470 if (mctrl & TIOCM_RTS)
2471 mcr |= UART_MCR_RTS;
2472 if (mctrl & TIOCM_DTR)
2473 mcr |= UART_MCR_DTR;
2474 if (mctrl & TIOCM_OUT1)
2475 mcr |= UART_MCR_OUT1;
2476 if (mctrl & TIOCM_OUT2)
2477 mcr |= UART_MCR_OUT2;
2478 if (mctrl & TIOCM_LOOP)
2479 mcr |= UART_MCR_LOOP;
2480
Pat Gefre64b91372006-03-25 03:08:07 -08002481 set_mcr(the_port, mcr, IOC4_SHADOW_DTR);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002482}
2483
2484/**
2485 * ic4_get_mctrl - get control line info
2486 * @port: port to operate on
2487 *
2488 */
2489static unsigned int ic4_get_mctrl(struct uart_port *the_port)
2490{
Pat Gefre64b91372006-03-25 03:08:07 -08002491 struct ioc4_port *port = get_ioc4_port(the_port, 0);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002492 uint32_t shadow;
2493 unsigned int ret = 0;
2494
Pat Gefre64b91372006-03-25 03:08:07 -08002495 if (!port_is_active(port, the_port))
Linus Torvalds1da177e2005-04-16 15:20:36 -07002496 return 0;
2497
2498 shadow = readl(&port->ip_serial_regs->shadow);
2499 if (shadow & IOC4_SHADOW_DCD)
2500 ret |= TIOCM_CAR;
2501 if (shadow & IOC4_SHADOW_DR)
2502 ret |= TIOCM_DSR;
2503 if (shadow & IOC4_SHADOW_CTS)
2504 ret |= TIOCM_CTS;
2505 return ret;
2506}
2507
2508/**
2509 * ic4_start_tx - Start transmitter, flush any output
2510 * @port: Port to operate on
Linus Torvalds1da177e2005-04-16 15:20:36 -07002511 *
2512 */
Russell Kingb129a8c2005-08-31 10:12:14 +01002513static void ic4_start_tx(struct uart_port *the_port)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002514{
Pat Gefre64b91372006-03-25 03:08:07 -08002515 struct ioc4_port *port = get_ioc4_port(the_port, 0);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002516
Pat Gefre64b91372006-03-25 03:08:07 -08002517 if (port_is_active(port, the_port)) {
Pat Gefre396dc442005-10-30 15:02:49 -08002518 set_notification(port, N_OUTPUT_LOWAT, 1);
2519 enable_intrs(port, port->ip_hooks->intr_tx_mt);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002520 }
2521}
2522
2523/**
2524 * ic4_break_ctl - handle breaks
2525 * @port: Port to operate on
2526 * @break_state: Break state
2527 *
2528 */
2529static void ic4_break_ctl(struct uart_port *the_port, int break_state)
2530{
2531}
2532
2533/**
Pat Gefre64b91372006-03-25 03:08:07 -08002534 * ic4_startup - Start up the serial port
Linus Torvalds1da177e2005-04-16 15:20:36 -07002535 * @port: Port to operate on
2536 *
2537 */
2538static int ic4_startup(struct uart_port *the_port)
2539{
2540 int retval;
2541 struct ioc4_port *port;
2542 struct ioc4_control *control;
Alan Coxebd2c8f2009-09-19 13:13:28 -07002543 struct uart_state *state;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002544 unsigned long port_flags;
2545
Pat Gefre64b91372006-03-25 03:08:07 -08002546 if (!the_port)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002547 return -ENODEV;
Pat Gefre64b91372006-03-25 03:08:07 -08002548 port = get_ioc4_port(the_port, 1);
2549 if (!port)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002550 return -ENODEV;
Alan Coxebd2c8f2009-09-19 13:13:28 -07002551 state = the_port->state;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002552
2553 control = port->ip_control;
2554 if (!control) {
Pat Gefre64b91372006-03-25 03:08:07 -08002555 port->ip_port = NULL;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002556 return -ENODEV;
2557 }
2558
2559 /* Start up the serial port */
Pat Gefre396dc442005-10-30 15:02:49 -08002560 spin_lock_irqsave(&the_port->lock, port_flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002561 retval = ic4_startup_local(the_port);
Pat Gefre396dc442005-10-30 15:02:49 -08002562 spin_unlock_irqrestore(&the_port->lock, port_flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002563 return retval;
2564}
2565
2566/**
2567 * ic4_set_termios - set termios stuff
2568 * @port: port to operate on
2569 * @termios: New settings
2570 * @termios: Old
2571 *
2572 */
2573static void
2574ic4_set_termios(struct uart_port *the_port,
Alan Cox606d0992006-12-08 02:38:45 -08002575 struct ktermios *termios, struct ktermios *old_termios)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002576{
Linus Torvalds1da177e2005-04-16 15:20:36 -07002577 unsigned long port_flags;
2578
Pat Gefre396dc442005-10-30 15:02:49 -08002579 spin_lock_irqsave(&the_port->lock, port_flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002580 ioc4_change_speed(the_port, termios, old_termios);
Pat Gefre396dc442005-10-30 15:02:49 -08002581 spin_unlock_irqrestore(&the_port->lock, port_flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002582}
2583
2584/**
2585 * ic4_request_port - allocate resources for port - no op....
2586 * @port: port to operate on
2587 *
2588 */
2589static int ic4_request_port(struct uart_port *port)
2590{
2591 return 0;
2592}
2593
2594/* Associate the uart functions above - given to serial core */
2595
2596static struct uart_ops ioc4_ops = {
2597 .tx_empty = ic4_tx_empty,
2598 .set_mctrl = ic4_set_mctrl,
2599 .get_mctrl = ic4_get_mctrl,
2600 .stop_tx = ic4_stop_tx,
2601 .start_tx = ic4_start_tx,
2602 .stop_rx = null_void_function,
2603 .enable_ms = null_void_function,
2604 .break_ctl = ic4_break_ctl,
2605 .startup = ic4_startup,
2606 .shutdown = ic4_shutdown,
2607 .set_termios = ic4_set_termios,
2608 .type = ic4_type,
2609 .release_port = null_void_function,
2610 .request_port = ic4_request_port,
2611};
2612
2613/*
2614 * Boot-time initialization code
2615 */
2616
Pat Gefre64b91372006-03-25 03:08:07 -08002617static struct uart_driver ioc4_uart_rs232 = {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002618 .owner = THIS_MODULE,
Pat Gefre64b91372006-03-25 03:08:07 -08002619 .driver_name = "ioc4_serial_rs232",
2620 .dev_name = DEVICE_NAME_RS232,
Linus Torvalds1da177e2005-04-16 15:20:36 -07002621 .major = DEVICE_MAJOR,
Pat Gefre64b91372006-03-25 03:08:07 -08002622 .minor = DEVICE_MINOR_RS232,
Linus Torvalds1da177e2005-04-16 15:20:36 -07002623 .nr = IOC4_NUM_CARDS * IOC4_NUM_SERIAL_PORTS,
2624};
2625
Pat Gefre64b91372006-03-25 03:08:07 -08002626static struct uart_driver ioc4_uart_rs422 = {
2627 .owner = THIS_MODULE,
2628 .driver_name = "ioc4_serial_rs422",
2629 .dev_name = DEVICE_NAME_RS422,
2630 .major = DEVICE_MAJOR,
2631 .minor = DEVICE_MINOR_RS422,
2632 .nr = IOC4_NUM_CARDS * IOC4_NUM_SERIAL_PORTS,
2633};
2634
2635
Linus Torvalds1da177e2005-04-16 15:20:36 -07002636/**
Pat Gefre64b91372006-03-25 03:08:07 -08002637 * ioc4_serial_remove_one - detach function
2638 *
2639 * @idd: IOC4 master module data for this IOC4
2640 */
2641
2642static int ioc4_serial_remove_one(struct ioc4_driver_data *idd)
2643{
2644 int port_num, port_type;
2645 struct ioc4_control *control;
2646 struct uart_port *the_port;
2647 struct ioc4_port *port;
2648 struct ioc4_soft *soft;
2649
Brent Casavantf5befce2006-06-23 02:05:52 -07002650 /* If serial driver did not attach, don't try to detach */
Pat Gefre64b91372006-03-25 03:08:07 -08002651 control = idd->idd_serial_data;
Brent Casavantf5befce2006-06-23 02:05:52 -07002652 if (!control)
2653 return 0;
Pat Gefre64b91372006-03-25 03:08:07 -08002654
2655 for (port_num = 0; port_num < IOC4_NUM_SERIAL_PORTS; port_num++) {
2656 for (port_type = UART_PORT_MIN;
2657 port_type < UART_PORT_COUNT;
2658 port_type++) {
2659 the_port = &control->ic_port[port_num].icp_uart_port
2660 [port_type];
2661 if (the_port) {
2662 switch (port_type) {
2663 case UART_PORT_RS422:
2664 uart_remove_one_port(&ioc4_uart_rs422,
2665 the_port);
2666 break;
2667 default:
2668 case UART_PORT_RS232:
2669 uart_remove_one_port(&ioc4_uart_rs232,
2670 the_port);
2671 break;
2672 }
2673 }
2674 }
2675 port = control->ic_port[port_num].icp_port;
2676 /* we allocate in pairs */
2677 if (!(port_num & 1) && port) {
2678 pci_free_consistent(port->ip_pdev,
2679 TOTAL_RING_BUF_SIZE,
2680 port->ip_cpu_ringbuf,
2681 port->ip_dma_ringbuf);
2682 kfree(port);
2683 }
2684 }
2685 soft = control->ic_soft;
2686 if (soft) {
2687 free_irq(control->ic_irq, soft);
2688 if (soft->is_ioc4_serial_addr) {
Amol Ladf4664132006-09-30 23:29:21 -07002689 iounmap(soft->is_ioc4_serial_addr);
Brent Casavant52c9ae02007-02-10 01:44:46 -08002690 release_mem_region((unsigned long)
Pat Gefre64b91372006-03-25 03:08:07 -08002691 soft->is_ioc4_serial_addr,
2692 sizeof(struct ioc4_serial));
2693 }
2694 kfree(soft);
2695 }
2696 kfree(control);
2697 idd->idd_serial_data = NULL;
2698
2699 return 0;
2700}
2701
2702
2703/**
2704 * ioc4_serial_core_attach_rs232 - register with serial core
Linus Torvalds1da177e2005-04-16 15:20:36 -07002705 * This is done during pci probing
2706 * @pdev: handle for this card
2707 */
2708static inline int
Pat Gefre64b91372006-03-25 03:08:07 -08002709ioc4_serial_core_attach(struct pci_dev *pdev, int port_type)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002710{
2711 struct ioc4_port *port;
2712 struct uart_port *the_port;
Brent Casavant22329b52005-06-21 17:15:59 -07002713 struct ioc4_driver_data *idd = pci_get_drvdata(pdev);
2714 struct ioc4_control *control = idd->idd_serial_data;
Pat Gefre64b91372006-03-25 03:08:07 -08002715 int port_num;
2716 int port_type_idx;
2717 struct uart_driver *u_driver;
2718
Linus Torvalds1da177e2005-04-16 15:20:36 -07002719
2720 DPRINT_CONFIG(("%s: attach pdev 0x%p - control 0x%p\n",
Harvey Harrison71cc2c22008-04-30 00:55:10 -07002721 __func__, pdev, (void *)control));
Linus Torvalds1da177e2005-04-16 15:20:36 -07002722
2723 if (!control)
2724 return -ENODEV;
2725
Pat Gefre64b91372006-03-25 03:08:07 -08002726 port_type_idx = (port_type == PROTO_RS232) ? UART_PORT_RS232
2727 : UART_PORT_RS422;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002728
Pat Gefre64b91372006-03-25 03:08:07 -08002729 u_driver = (port_type == PROTO_RS232) ? &ioc4_uart_rs232
2730 : &ioc4_uart_rs422;
2731
2732 /* once around for each port on this card */
2733 for (port_num = 0; port_num < IOC4_NUM_SERIAL_PORTS; port_num++) {
2734 the_port = &control->ic_port[port_num].icp_uart_port
2735 [port_type_idx];
2736 port = control->ic_port[port_num].icp_port;
2737 port->ip_all_ports[port_type_idx] = the_port;
2738
2739 DPRINT_CONFIG(("%s: attach the_port 0x%p / port 0x%p : type %s\n",
Harvey Harrison71cc2c22008-04-30 00:55:10 -07002740 __func__, (void *)the_port,
Pat Gefre64b91372006-03-25 03:08:07 -08002741 (void *)port,
2742 port_type == PROTO_RS232 ? "rs232" : "rs422"));
Linus Torvalds1da177e2005-04-16 15:20:36 -07002743
Linus Torvalds1da177e2005-04-16 15:20:36 -07002744 /* membase, iobase and mapbase just need to be non-0 */
2745 the_port->membase = (unsigned char __iomem *)1;
Pat Gefre64b91372006-03-25 03:08:07 -08002746 the_port->iobase = (pdev->bus->number << 16) | port_num;
2747 the_port->line = (Num_of_ioc4_cards << 2) | port_num;
2748 the_port->mapbase = port_type;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002749 the_port->type = PORT_16550A;
Pat Gefre396dc442005-10-30 15:02:49 -08002750 the_port->fifosize = IOC4_FIFO_CHARS;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002751 the_port->ops = &ioc4_ops;
2752 the_port->irq = control->ic_irq;
2753 the_port->dev = &pdev->dev;
Pat Gefre396dc442005-10-30 15:02:49 -08002754 spin_lock_init(&the_port->lock);
Pat Gefre64b91372006-03-25 03:08:07 -08002755 if (uart_add_one_port(u_driver, the_port) < 0) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002756 printk(KERN_WARNING
Pat Gefre396dc442005-10-30 15:02:49 -08002757 "%s: unable to add port %d bus %d\n",
Harvey Harrison71cc2c22008-04-30 00:55:10 -07002758 __func__, the_port->line, pdev->bus->number);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002759 } else {
2760 DPRINT_CONFIG(
Pat Gefre396dc442005-10-30 15:02:49 -08002761 ("IOC4 serial port %d irq = %d, bus %d\n",
2762 the_port->line, the_port->irq, pdev->bus->number));
Linus Torvalds1da177e2005-04-16 15:20:36 -07002763 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07002764 }
2765 return 0;
2766}
2767
2768/**
2769 * ioc4_serial_attach_one - register attach function
Brent Casavant22329b52005-06-21 17:15:59 -07002770 * called per card found from IOC4 master module.
2771 * @idd: Master module data for this IOC4
Linus Torvalds1da177e2005-04-16 15:20:36 -07002772 */
2773int
Brent Casavant22329b52005-06-21 17:15:59 -07002774ioc4_serial_attach_one(struct ioc4_driver_data *idd)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002775{
Brent Casavant22329b52005-06-21 17:15:59 -07002776 unsigned long tmp_addr1;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002777 struct ioc4_serial __iomem *serial;
2778 struct ioc4_soft *soft;
2779 struct ioc4_control *control;
Brent Casavant22329b52005-06-21 17:15:59 -07002780 int ret = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002781
2782
Harvey Harrison71cc2c22008-04-30 00:55:10 -07002783 DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __func__, idd->idd_pdev,
Pat Gefre64b91372006-03-25 03:08:07 -08002784 idd->idd_pci_id));
Linus Torvalds1da177e2005-04-16 15:20:36 -07002785
Brent Casavantf5befce2006-06-23 02:05:52 -07002786 /* PCI-RT does not bring out serial connections.
2787 * Do not attach to this particular IOC4.
2788 */
2789 if (idd->idd_variant == IOC4_VARIANT_PCI_RT)
2790 return 0;
2791
Linus Torvalds1da177e2005-04-16 15:20:36 -07002792 /* request serial registers */
Brent Casavant22329b52005-06-21 17:15:59 -07002793 tmp_addr1 = idd->idd_bar0 + IOC4_SERIAL_OFFSET;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002794
Brent Casavant52c9ae02007-02-10 01:44:46 -08002795 if (!request_mem_region(tmp_addr1, sizeof(struct ioc4_serial),
Linus Torvalds1da177e2005-04-16 15:20:36 -07002796 "sioc4_uart")) {
2797 printk(KERN_WARNING
2798 "ioc4 (%p): unable to get request region for "
Brent Casavant22329b52005-06-21 17:15:59 -07002799 "uart space\n", (void *)idd->idd_pdev);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002800 ret = -ENODEV;
2801 goto out1;
2802 }
2803 serial = ioremap(tmp_addr1, sizeof(struct ioc4_serial));
2804 if (!serial) {
2805 printk(KERN_WARNING
2806 "ioc4 (%p) : unable to remap ioc4 serial register\n",
Brent Casavant22329b52005-06-21 17:15:59 -07002807 (void *)idd->idd_pdev);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002808 ret = -ENODEV;
2809 goto out2;
2810 }
2811 DPRINT_CONFIG(("%s : mem 0x%p, serial 0x%p\n",
Harvey Harrison71cc2c22008-04-30 00:55:10 -07002812 __func__, (void *)idd->idd_misc_regs,
Pat Gefre64b91372006-03-25 03:08:07 -08002813 (void *)serial));
Linus Torvalds1da177e2005-04-16 15:20:36 -07002814
2815 /* Get memory for the new card */
Burman Yan8f31bb32007-02-14 00:33:07 -08002816 control = kzalloc(sizeof(struct ioc4_control), GFP_KERNEL);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002817
2818 if (!control) {
2819 printk(KERN_WARNING "ioc4_attach_one"
2820 ": unable to get memory for the IOC4\n");
2821 ret = -ENOMEM;
2822 goto out2;
2823 }
Brent Casavant22329b52005-06-21 17:15:59 -07002824 idd->idd_serial_data = control;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002825
2826 /* Allocate the soft structure */
Burman Yan8f31bb32007-02-14 00:33:07 -08002827 soft = kzalloc(sizeof(struct ioc4_soft), GFP_KERNEL);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002828 if (!soft) {
2829 printk(KERN_WARNING
2830 "ioc4 (%p): unable to get memory for the soft struct\n",
Brent Casavant22329b52005-06-21 17:15:59 -07002831 (void *)idd->idd_pdev);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002832 ret = -ENOMEM;
2833 goto out3;
2834 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07002835
2836 spin_lock_init(&soft->is_ir_lock);
Brent Casavant22329b52005-06-21 17:15:59 -07002837 soft->is_ioc4_misc_addr = idd->idd_misc_regs;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002838 soft->is_ioc4_serial_addr = serial;
2839
2840 /* Init the IOC4 */
Brent Casavant22329b52005-06-21 17:15:59 -07002841 writel(0xf << IOC4_SIO_CR_CMD_PULSE_SHIFT,
2842 &idd->idd_misc_regs->sio_cr.raw);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002843
2844 /* Enable serial port mode select generic PIO pins as outputs */
2845 writel(IOC4_GPCR_UART0_MODESEL | IOC4_GPCR_UART1_MODESEL
2846 | IOC4_GPCR_UART2_MODESEL | IOC4_GPCR_UART3_MODESEL,
Brent Casavant22329b52005-06-21 17:15:59 -07002847 &idd->idd_misc_regs->gpcr_s.raw);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002848
Brent Casavant22329b52005-06-21 17:15:59 -07002849 /* Clear and disable all serial interrupts */
Linus Torvalds1da177e2005-04-16 15:20:36 -07002850 write_ireg(soft, ~0, IOC4_W_IEC, IOC4_SIO_INTR_TYPE);
Brent Casavant22329b52005-06-21 17:15:59 -07002851 writel(~0, &idd->idd_misc_regs->sio_ir.raw);
2852 write_ireg(soft, IOC4_OTHER_IR_SER_MEMERR, IOC4_W_IEC,
2853 IOC4_OTHER_INTR_TYPE);
2854 writel(IOC4_OTHER_IR_SER_MEMERR, &idd->idd_misc_regs->other_ir.raw);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002855 control->ic_soft = soft;
Brent Casavant22329b52005-06-21 17:15:59 -07002856
2857 /* Hook up interrupt handler */
Thomas Gleixner40663cc2006-07-01 19:29:43 -07002858 if (!request_irq(idd->idd_pdev->irq, ioc4_intr, IRQF_SHARED,
Pat Gefre64b91372006-03-25 03:08:07 -08002859 "sgi-ioc4serial", soft)) {
Brent Casavant22329b52005-06-21 17:15:59 -07002860 control->ic_irq = idd->idd_pdev->irq;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002861 } else {
2862 printk(KERN_WARNING
2863 "%s : request_irq fails for IRQ 0x%x\n ",
Harvey Harrison71cc2c22008-04-30 00:55:10 -07002864 __func__, idd->idd_pdev->irq);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002865 }
Brent Casavantd4c477c2005-06-21 17:16:01 -07002866 ret = ioc4_attach_local(idd);
2867 if (ret)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002868 goto out4;
2869
Pat Gefre64b91372006-03-25 03:08:07 -08002870 /* register port with the serial core - 1 rs232, 1 rs422 */
Linus Torvalds1da177e2005-04-16 15:20:36 -07002871
Pat Gefre64b91372006-03-25 03:08:07 -08002872 if ((ret = ioc4_serial_core_attach(idd->idd_pdev, PROTO_RS232)))
Linus Torvalds1da177e2005-04-16 15:20:36 -07002873 goto out4;
2874
Pat Gefre64b91372006-03-25 03:08:07 -08002875 if ((ret = ioc4_serial_core_attach(idd->idd_pdev, PROTO_RS422)))
2876 goto out5;
2877
Pat Gefre396dc442005-10-30 15:02:49 -08002878 Num_of_ioc4_cards++;
2879
Linus Torvalds1da177e2005-04-16 15:20:36 -07002880 return ret;
2881
2882 /* error exits that give back resources */
Pat Gefre64b91372006-03-25 03:08:07 -08002883out5:
2884 ioc4_serial_remove_one(idd);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002885out4:
2886 kfree(soft);
2887out3:
2888 kfree(control);
2889out2:
Amol Ladf4664132006-09-30 23:29:21 -07002890 if (serial)
2891 iounmap(serial);
Brent Casavant52c9ae02007-02-10 01:44:46 -08002892 release_mem_region(tmp_addr1, sizeof(struct ioc4_serial));
Linus Torvalds1da177e2005-04-16 15:20:36 -07002893out1:
Linus Torvalds1da177e2005-04-16 15:20:36 -07002894
2895 return ret;
2896}
2897
2898
Brent Casavant22329b52005-06-21 17:15:59 -07002899static struct ioc4_submodule ioc4_serial_submodule = {
2900 .is_name = "IOC4_serial",
2901 .is_owner = THIS_MODULE,
2902 .is_probe = ioc4_serial_attach_one,
2903 .is_remove = ioc4_serial_remove_one,
2904};
Linus Torvalds1da177e2005-04-16 15:20:36 -07002905
2906/**
2907 * ioc4_serial_init - module init
2908 */
Jean Delvare2ea5d352009-12-14 18:00:27 -08002909static int __init ioc4_serial_init(void)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002910{
2911 int ret;
2912
2913 /* register with serial core */
Pat Gefre64b91372006-03-25 03:08:07 -08002914 if ((ret = uart_register_driver(&ioc4_uart_rs232)) < 0) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002915 printk(KERN_WARNING
Pat Gefre64b91372006-03-25 03:08:07 -08002916 "%s: Couldn't register rs232 IOC4 serial driver\n",
Harvey Harrison71cc2c22008-04-30 00:55:10 -07002917 __func__);
Jean Delvare93855652009-12-14 18:00:28 -08002918 goto out;
Pat Gefre64b91372006-03-25 03:08:07 -08002919 }
2920 if ((ret = uart_register_driver(&ioc4_uart_rs422)) < 0) {
2921 printk(KERN_WARNING
2922 "%s: Couldn't register rs422 IOC4 serial driver\n",
Harvey Harrison71cc2c22008-04-30 00:55:10 -07002923 __func__);
Jean Delvare93855652009-12-14 18:00:28 -08002924 goto out_uart_rs232;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002925 }
Brent Casavant22329b52005-06-21 17:15:59 -07002926
2927 /* register with IOC4 main module */
Jean Delvare93855652009-12-14 18:00:28 -08002928 ret = ioc4_register_submodule(&ioc4_serial_submodule);
2929 if (ret)
2930 goto out_uart_rs422;
2931 return 0;
2932
2933out_uart_rs422:
2934 uart_unregister_driver(&ioc4_uart_rs422);
2935out_uart_rs232:
2936 uart_unregister_driver(&ioc4_uart_rs232);
2937out:
2938 return ret;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002939}
2940
Jean Delvare2ea5d352009-12-14 18:00:27 -08002941static void __exit ioc4_serial_exit(void)
Brent Casavant22329b52005-06-21 17:15:59 -07002942{
2943 ioc4_unregister_submodule(&ioc4_serial_submodule);
Pat Gefre64b91372006-03-25 03:08:07 -08002944 uart_unregister_driver(&ioc4_uart_rs232);
2945 uart_unregister_driver(&ioc4_uart_rs422);
Brent Casavant22329b52005-06-21 17:15:59 -07002946}
2947
Brent Casavant59f14802006-10-17 00:09:25 -07002948late_initcall(ioc4_serial_init); /* Call only after tty init is done */
Brent Casavant22329b52005-06-21 17:15:59 -07002949module_exit(ioc4_serial_exit);
2950
Linus Torvalds1da177e2005-04-16 15:20:36 -07002951MODULE_AUTHOR("Pat Gefre - Silicon Graphics Inc. (SGI) <pfg@sgi.com>");
2952MODULE_DESCRIPTION("Serial PCI driver module for SGI IOC4 Base-IO Card");
2953MODULE_LICENSE("GPL");