blob: 713a108c02ef1901c99667773204e84b7602ef12 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * NCR 5380 defines
3 *
4 * Copyright 1993, Drew Eckhardt
5 * Visionary Computing
6 * (Unix consulting and custom programming)
7 * drew@colorado.edu
8 * +1 (303) 666-5836
9 *
10 * DISTRIBUTION RELEASE 7
11 *
12 * For more information, please consult
13 *
14 * NCR 5380 Family
15 * SCSI Protocol Controller
16 * Databook
17 * NCR Microelectronics
18 * 1635 Aeroplaza Drive
19 * Colorado Springs, CO 80916
20 * 1+ (719) 578-3400
21 * 1+ (800) 334-5454
22 */
23
24/*
25 * $Log: NCR5380.h,v $
26 */
27
28#ifndef NCR5380_H
29#define NCR5380_H
30
31#include <linux/interrupt.h>
32
33#define NCR5380_PUBLIC_RELEASE 7
34#define NCR53C400_PUBLIC_RELEASE 2
35
36#define NDEBUG_ARBITRATION 0x1
37#define NDEBUG_AUTOSENSE 0x2
38#define NDEBUG_DMA 0x4
39#define NDEBUG_HANDSHAKE 0x8
40#define NDEBUG_INFORMATION 0x10
41#define NDEBUG_INIT 0x20
42#define NDEBUG_INTR 0x40
43#define NDEBUG_LINKED 0x80
44#define NDEBUG_MAIN 0x100
45#define NDEBUG_NO_DATAOUT 0x200
46#define NDEBUG_NO_WRITE 0x400
47#define NDEBUG_PIO 0x800
48#define NDEBUG_PSEUDO_DMA 0x1000
49#define NDEBUG_QUEUES 0x2000
50#define NDEBUG_RESELECTION 0x4000
51#define NDEBUG_SELECTION 0x8000
52#define NDEBUG_USLEEP 0x10000
53#define NDEBUG_LAST_BYTE_SENT 0x20000
54#define NDEBUG_RESTART_SELECT 0x40000
55#define NDEBUG_EXTENDED 0x80000
56#define NDEBUG_C400_PREAD 0x100000
57#define NDEBUG_C400_PWRITE 0x200000
58#define NDEBUG_LISTS 0x400000
59
60#define NDEBUG_ANY 0xFFFFFFFFUL
61
62/*
63 * The contents of the OUTPUT DATA register are asserted on the bus when
64 * either arbitration is occurring or the phase-indicating signals (
65 * IO, CD, MSG) in the TARGET COMMAND register and the ASSERT DATA
66 * bit in the INITIATOR COMMAND register is set.
67 */
68
69#define OUTPUT_DATA_REG 0 /* wo DATA lines on SCSI bus */
70#define CURRENT_SCSI_DATA_REG 0 /* ro same */
71
72#define INITIATOR_COMMAND_REG 1 /* rw */
73#define ICR_ASSERT_RST 0x80 /* rw Set to assert RST */
74#define ICR_ARBITRATION_PROGRESS 0x40 /* ro Indicates arbitration complete */
75#define ICR_TRI_STATE 0x40 /* wo Set to tri-state drivers */
76#define ICR_ARBITRATION_LOST 0x20 /* ro Indicates arbitration lost */
77#define ICR_DIFF_ENABLE 0x20 /* wo Set to enable diff. drivers */
78#define ICR_ASSERT_ACK 0x10 /* rw ini Set to assert ACK */
79#define ICR_ASSERT_BSY 0x08 /* rw Set to assert BSY */
80#define ICR_ASSERT_SEL 0x04 /* rw Set to assert SEL */
81#define ICR_ASSERT_ATN 0x02 /* rw Set to assert ATN */
82#define ICR_ASSERT_DATA 0x01 /* rw SCSI_DATA_REG is asserted */
83
84#ifdef DIFFERENTIAL
85#define ICR_BASE ICR_DIFF_ENABLE
86#else
87#define ICR_BASE 0
88#endif
89
90#define MODE_REG 2
91/*
92 * Note : BLOCK_DMA code will keep DRQ asserted for the duration of the
93 * transfer, causing the chip to hog the bus. You probably don't want
94 * this.
95 */
96#define MR_BLOCK_DMA_MODE 0x80 /* rw block mode DMA */
97#define MR_TARGET 0x40 /* rw target mode */
98#define MR_ENABLE_PAR_CHECK 0x20 /* rw enable parity checking */
99#define MR_ENABLE_PAR_INTR 0x10 /* rw enable bad parity interrupt */
100#define MR_ENABLE_EOP_INTR 0x08 /* rw enable eop interrupt */
101#define MR_MONITOR_BSY 0x04 /* rw enable int on unexpected bsy fail */
102#define MR_DMA_MODE 0x02 /* rw DMA / pseudo DMA mode */
103#define MR_ARBITRATE 0x01 /* rw start arbitration */
104
105#ifdef PARITY
106#define MR_BASE MR_ENABLE_PAR_CHECK
107#else
108#define MR_BASE 0
109#endif
110
111#define TARGET_COMMAND_REG 3
112#define TCR_LAST_BYTE_SENT 0x80 /* ro DMA done */
113#define TCR_ASSERT_REQ 0x08 /* tgt rw assert REQ */
114#define TCR_ASSERT_MSG 0x04 /* tgt rw assert MSG */
115#define TCR_ASSERT_CD 0x02 /* tgt rw assert CD */
116#define TCR_ASSERT_IO 0x01 /* tgt rw assert IO */
117
118#define STATUS_REG 4 /* ro */
119/*
120 * Note : a set bit indicates an active signal, driven by us or another
121 * device.
122 */
123#define SR_RST 0x80
124#define SR_BSY 0x40
125#define SR_REQ 0x20
126#define SR_MSG 0x10
127#define SR_CD 0x08
128#define SR_IO 0x04
129#define SR_SEL 0x02
130#define SR_DBP 0x01
131
132/*
133 * Setting a bit in this register will cause an interrupt to be generated when
134 * BSY is false and SEL true and this bit is asserted on the bus.
135 */
136#define SELECT_ENABLE_REG 4 /* wo */
137
138#define BUS_AND_STATUS_REG 5 /* ro */
139#define BASR_END_DMA_TRANSFER 0x80 /* ro set on end of transfer */
140#define BASR_DRQ 0x40 /* ro mirror of DRQ pin */
141#define BASR_PARITY_ERROR 0x20 /* ro parity error detected */
142#define BASR_IRQ 0x10 /* ro mirror of IRQ pin */
143#define BASR_PHASE_MATCH 0x08 /* ro Set when MSG CD IO match TCR */
144#define BASR_BUSY_ERROR 0x04 /* ro Unexpected change to inactive state */
145#define BASR_ATN 0x02 /* ro BUS status */
146#define BASR_ACK 0x01 /* ro BUS status */
147
148/* Write any value to this register to start a DMA send */
149#define START_DMA_SEND_REG 5 /* wo */
150
151/*
152 * Used in DMA transfer mode, data is latched from the SCSI bus on
153 * the falling edge of REQ (ini) or ACK (tgt)
154 */
155#define INPUT_DATA_REG 6 /* ro */
156
157/* Write any value to this register to start a DMA receive */
158#define START_DMA_TARGET_RECEIVE_REG 6 /* wo */
159
160/* Read this register to clear interrupt conditions */
161#define RESET_PARITY_INTERRUPT_REG 7 /* ro */
162
163/* Write any value to this register to start an ini mode DMA receive */
164#define START_DMA_INITIATOR_RECEIVE_REG 7 /* wo */
165
166#define C400_CONTROL_STATUS_REG NCR53C400_register_offset-8 /* rw */
167
168#define CSR_RESET 0x80 /* wo Resets 53c400 */
169#define CSR_53C80_REG 0x80 /* ro 5380 registers busy */
170#define CSR_TRANS_DIR 0x40 /* rw Data transfer direction */
171#define CSR_SCSI_BUFF_INTR 0x20 /* rw Enable int on transfer ready */
172#define CSR_53C80_INTR 0x10 /* rw Enable 53c80 interrupts */
173#define CSR_SHARED_INTR 0x08 /* rw Interrupt sharing */
174#define CSR_HOST_BUF_NOT_RDY 0x04 /* ro Is Host buffer ready */
175#define CSR_SCSI_BUF_RDY 0x02 /* ro SCSI buffer read */
176#define CSR_GATED_53C80_IRQ 0x01 /* ro Last block xferred */
177
178#if 0
179#define CSR_BASE CSR_SCSI_BUFF_INTR | CSR_53C80_INTR
180#else
181#define CSR_BASE CSR_53C80_INTR
182#endif
183
184/* Number of 128-byte blocks to be transferred */
185#define C400_BLOCK_COUNTER_REG NCR53C400_register_offset-7 /* rw */
186
187/* Resume transfer after disconnect */
188#define C400_RESUME_TRANSFER_REG NCR53C400_register_offset-6 /* wo */
189
190/* Access to host buffer stack */
191#define C400_HOST_BUFFER NCR53C400_register_offset-4 /* rw */
192
193
194/* Note : PHASE_* macros are based on the values of the STATUS register */
195#define PHASE_MASK (SR_MSG | SR_CD | SR_IO)
196
197#define PHASE_DATAOUT 0
198#define PHASE_DATAIN SR_IO
199#define PHASE_CMDOUT SR_CD
200#define PHASE_STATIN (SR_CD | SR_IO)
201#define PHASE_MSGOUT (SR_MSG | SR_CD)
202#define PHASE_MSGIN (SR_MSG | SR_CD | SR_IO)
203#define PHASE_UNKNOWN 0xff
204
205/*
206 * Convert status register phase to something we can use to set phase in
207 * the target register so we can get phase mismatch interrupts on DMA
208 * transfers.
209 */
210
211#define PHASE_SR_TO_TCR(phase) ((phase) >> 2)
212
213/*
214 * The internal should_disconnect() function returns these based on the
215 * expected length of a disconnect if a device supports disconnect/
216 * reconnect.
217 */
218
219#define DISCONNECT_NONE 0
220#define DISCONNECT_TIME_TO_DATA 1
221#define DISCONNECT_LONG 2
222
223/*
224 * These are "special" values for the tag parameter passed to NCR5380_select.
225 */
226
227#define TAG_NEXT -1 /* Use next free tag */
228#define TAG_NONE -2 /*
229 * Establish I_T_L nexus instead of I_T_L_Q
230 * even on SCSI-II devices.
231 */
232
233/*
234 * These are "special" values for the irq and dma_channel fields of the
235 * Scsi_Host structure
236 */
237
238#define SCSI_IRQ_NONE 255
239#define DMA_NONE 255
240#define IRQ_AUTO 254
241#define DMA_AUTO 254
242#define PORT_AUTO 0xffff /* autoprobe io port for 53c400a */
243
244#define FLAG_HAS_LAST_BYTE_SENT 1 /* NCR53c81 or better */
245#define FLAG_CHECK_LAST_BYTE_SENT 2 /* Only test once */
246#define FLAG_NCR53C400 4 /* NCR53c400 */
247#define FLAG_NO_PSEUDO_DMA 8 /* Inhibit DMA */
248#define FLAG_DTC3181E 16 /* DTC3181E */
249
250#ifndef ASM
251struct NCR5380_hostdata {
252 NCR5380_implementation_fields; /* implementation specific */
253 struct Scsi_Host *host; /* Host backpointer */
254 unsigned char id_mask, id_higher_mask; /* 1 << id, all bits greater */
255 unsigned char targets_present; /* targets we have connected
256 to, so we can call a select
257 failure a retryable condition */
258 volatile unsigned char busy[8]; /* index = target, bit = lun */
259#if defined(REAL_DMA) || defined(REAL_DMA_POLL)
260 volatile int dma_len; /* requested length of DMA */
261#endif
262 volatile unsigned char last_message; /* last message OUT */
263 volatile Scsi_Cmnd *connected; /* currently connected command */
264 volatile Scsi_Cmnd *issue_queue; /* waiting to be issued */
265 volatile Scsi_Cmnd *disconnected_queue; /* waiting for reconnect */
266 volatile int restart_select; /* we have disconnected,
267 used to restart
268 NCR5380_select() */
269 volatile unsigned aborted:1; /* flag, says aborted */
270 int flags;
271 unsigned long time_expires; /* in jiffies, set prior to sleeping */
272 int select_time; /* timer in select for target response */
273 volatile Scsi_Cmnd *selecting;
David Howellsc4028952006-11-22 14:57:56 +0000274 struct delayed_work coroutine; /* our co-routine */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700275#ifdef NCR5380_STATS
276 unsigned timebase; /* Base for time calcs */
277 long time_read[8]; /* time to do reads */
278 long time_write[8]; /* time to do writes */
279 unsigned long bytes_read[8]; /* bytes read */
280 unsigned long bytes_write[8]; /* bytes written */
281 unsigned pendingr;
282 unsigned pendingw;
283#endif
284};
285
286#ifdef __KERNEL__
287
288#define dprintk(a,b) do {} while(0)
289#define NCR5380_dprint(a,b) do {} while(0)
290#define NCR5380_dprint_phase(a,b) do {} while(0)
291
292#if defined(AUTOPROBE_IRQ)
293static int NCR5380_probe_irq(struct Scsi_Host *instance, int possible);
294#endif
295static int NCR5380_init(struct Scsi_Host *instance, int flags);
296static void NCR5380_exit(struct Scsi_Host *instance);
297static void NCR5380_information_transfer(struct Scsi_Host *instance);
298#ifndef DONT_USE_INTR
David Howells7d12e782006-10-05 14:55:46 +0100299static irqreturn_t NCR5380_intr(int irq, void *dev_id);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700300#endif
David Howellsc4028952006-11-22 14:57:56 +0000301static void NCR5380_main(struct work_struct *work);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700302static void NCR5380_print_options(struct Scsi_Host *instance);
303#ifdef NDEBUG
304static void NCR5380_print_phase(struct Scsi_Host *instance);
305static void NCR5380_print(struct Scsi_Host *instance);
306#endif
307static int NCR5380_abort(Scsi_Cmnd * cmd);
308static int NCR5380_bus_reset(Scsi_Cmnd * cmd);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700309static int NCR5380_queue_command(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *));
310static int NCR5380_proc_info(struct Scsi_Host *instance, char *buffer, char **start,
311off_t offset, int length, int inout);
312
313static void NCR5380_reselect(struct Scsi_Host *instance);
314static int NCR5380_select(struct Scsi_Host *instance, Scsi_Cmnd * cmd, int tag);
315#if defined(PSEUDO_DMA) || defined(REAL_DMA) || defined(REAL_DMA_POLL)
316static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data);
317#endif
318static int NCR5380_transfer_pio(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data);
319
320#if (defined(REAL_DMA) || defined(REAL_DMA_POLL))
321
322#if defined(i386) || defined(__alpha__)
323
324/**
325 * NCR5380_pc_dma_setup - setup ISA DMA
326 * @instance: adapter to set up
327 * @ptr: block to transfer (virtual address)
328 * @count: number of bytes to transfer
329 * @mode: DMA controller mode to use
330 *
331 * Program the DMA controller ready to perform an ISA DMA transfer
332 * on this chip.
333 *
334 * Locks: takes and releases the ISA DMA lock.
335 */
336
337static __inline__ int NCR5380_pc_dma_setup(struct Scsi_Host *instance, unsigned char *ptr, unsigned int count, unsigned char mode)
338{
339 unsigned limit;
340 unsigned long bus_addr = virt_to_bus(ptr);
341 unsigned long flags;
342
343 if (instance->dma_channel <= 3) {
344 if (count > 65536)
345 count = 65536;
346 limit = 65536 - (bus_addr & 0xFFFF);
347 } else {
348 if (count > 65536 * 2)
349 count = 65536 * 2;
350 limit = 65536 * 2 - (bus_addr & 0x1FFFF);
351 }
352
353 if (count > limit)
354 count = limit;
355
356 if ((count & 1) || (bus_addr & 1))
357 panic("scsi%d : attempted unaligned DMA transfer\n", instance->host_no);
358
359 flags=claim_dma_lock();
360 disable_dma(instance->dma_channel);
361 clear_dma_ff(instance->dma_channel);
362 set_dma_addr(instance->dma_channel, bus_addr);
363 set_dma_count(instance->dma_channel, count);
364 set_dma_mode(instance->dma_channel, mode);
365 enable_dma(instance->dma_channel);
366 release_dma_lock(flags);
367
368 return count;
369}
370
371/**
372 * NCR5380_pc_dma_write_setup - setup ISA DMA write
373 * @instance: adapter to set up
374 * @ptr: block to transfer (virtual address)
375 * @count: number of bytes to transfer
376 *
377 * Program the DMA controller ready to perform an ISA DMA write to the
378 * SCSI controller.
379 *
380 * Locks: called routines take and release the ISA DMA lock.
381 */
382
383static __inline__ int NCR5380_pc_dma_write_setup(struct Scsi_Host *instance, unsigned char *src, unsigned int count)
384{
385 return NCR5380_pc_dma_setup(instance, src, count, DMA_MODE_WRITE);
386}
387
388/**
389 * NCR5380_pc_dma_read_setup - setup ISA DMA read
390 * @instance: adapter to set up
391 * @ptr: block to transfer (virtual address)
392 * @count: number of bytes to transfer
393 *
394 * Program the DMA controller ready to perform an ISA DMA read from the
395 * SCSI controller.
396 *
397 * Locks: called routines take and release the ISA DMA lock.
398 */
399
400static __inline__ int NCR5380_pc_dma_read_setup(struct Scsi_Host *instance, unsigned char *src, unsigned int count)
401{
402 return NCR5380_pc_dma_setup(instance, src, count, DMA_MODE_READ);
403}
404
405/**
406 * NCR5380_pc_dma_residual - return bytes left
407 * @instance: adapter
408 *
409 * Reports the number of bytes left over after the DMA was terminated.
410 *
411 * Locks: takes and releases the ISA DMA lock.
412 */
413
414static __inline__ int NCR5380_pc_dma_residual(struct Scsi_Host *instance)
415{
416 unsigned long flags;
417 int tmp;
418
419 flags = claim_dma_lock();
420 clear_dma_ff(instance->dma_channel);
421 tmp = get_dma_residue(instance->dma_channel);
422 release_dma_lock(flags);
423
424 return tmp;
425}
426#endif /* defined(i386) || defined(__alpha__) */
427#endif /* defined(REAL_DMA) */
428#endif /* __KERNEL__ */
429#endif /* ndef ASM */
430#endif /* NCR5380_H */