blob: e6ac3177fbbe57437fe0844457ffcbed784c8f21 [file] [log] [blame]
Michael Buesch61e115a2007-09-18 15:12:50 -04001/*
2 * Sonics Silicon Backplane
3 * Broadcom PCI-core driver
4 *
5 * Copyright 2005, Broadcom Corporation
Michael Büscheb032b92011-07-04 20:50:05 +02006 * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
Michael Buesch61e115a2007-09-18 15:12:50 -04007 *
8 * Licensed under the GNU/GPL. See COPYING for details.
9 */
10
11#include <linux/ssb/ssb.h>
12#include <linux/pci.h>
13#include <linux/delay.h>
Michael Buesch7cb44612008-02-19 17:46:48 +010014#include <linux/ssb/ssb_embedded.h>
Michael Buesch61e115a2007-09-18 15:12:50 -040015
16#include "ssb_private.h"
17
Rafał Miłeckiccc7c282011-04-01 13:26:52 +020018static u32 ssb_pcie_read(struct ssb_pcicore *pc, u32 address);
19static void ssb_pcie_write(struct ssb_pcicore *pc, u32 address, u32 data);
20static u16 ssb_pcie_mdio_read(struct ssb_pcicore *pc, u8 device, u8 address);
21static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device,
22 u8 address, u16 data);
Michael Buesch61e115a2007-09-18 15:12:50 -040023
24static inline
25u32 pcicore_read32(struct ssb_pcicore *pc, u16 offset)
26{
27 return ssb_read32(pc->dev, offset);
28}
29
30static inline
31void pcicore_write32(struct ssb_pcicore *pc, u16 offset, u32 value)
32{
33 ssb_write32(pc->dev, offset, value);
34}
35
Michael Buesch7cb44612008-02-19 17:46:48 +010036static inline
37u16 pcicore_read16(struct ssb_pcicore *pc, u16 offset)
38{
39 return ssb_read16(pc->dev, offset);
40}
41
42static inline
43void pcicore_write16(struct ssb_pcicore *pc, u16 offset, u16 value)
44{
45 ssb_write16(pc->dev, offset, value);
46}
47
Michael Buesch61e115a2007-09-18 15:12:50 -040048/**************************************************
49 * Code for hostmode operation.
50 **************************************************/
51
52#ifdef CONFIG_SSB_PCICORE_HOSTMODE
53
54#include <asm/paccess.h>
55/* Probe a 32bit value on the bus and catch bus exceptions.
56 * Returns nonzero on a bus exception.
57 * This is MIPS specific */
58#define mips_busprobe32(val, addr) get_dbe((val), ((u32 *)(addr)))
59
60/* Assume one-hot slot wiring */
61#define SSB_PCI_SLOT_MAX 16
62
63/* Global lock is OK, as we won't have more than one extpci anyway. */
64static DEFINE_SPINLOCK(cfgspace_lock);
65/* Core to access the external PCI config space. Can only have one. */
66static struct ssb_pcicore *extpci_core;
67
Michael Buesch61e115a2007-09-18 15:12:50 -040068
69static u32 get_cfgspace_addr(struct ssb_pcicore *pc,
70 unsigned int bus, unsigned int dev,
71 unsigned int func, unsigned int off)
72{
73 u32 addr = 0;
74 u32 tmp;
75
Michael Buesch7cb44612008-02-19 17:46:48 +010076 /* We do only have one cardbus device behind the bridge. */
77 if (pc->cardbusmode && (dev >= 1))
Michael Buesch61e115a2007-09-18 15:12:50 -040078 goto out;
Michael Buesch7cb44612008-02-19 17:46:48 +010079
Michael Buesch61e115a2007-09-18 15:12:50 -040080 if (bus == 0) {
81 /* Type 0 transaction */
82 if (unlikely(dev >= SSB_PCI_SLOT_MAX))
83 goto out;
84 /* Slide the window */
85 tmp = SSB_PCICORE_SBTOPCI_CFG0;
86 tmp |= ((1 << (dev + 16)) & SSB_PCICORE_SBTOPCI1_MASK);
87 pcicore_write32(pc, SSB_PCICORE_SBTOPCI1, tmp);
88 /* Calculate the address */
89 addr = SSB_PCI_CFG;
90 addr |= ((1 << (dev + 16)) & ~SSB_PCICORE_SBTOPCI1_MASK);
91 addr |= (func << 8);
92 addr |= (off & ~3);
93 } else {
94 /* Type 1 transaction */
95 pcicore_write32(pc, SSB_PCICORE_SBTOPCI1,
96 SSB_PCICORE_SBTOPCI_CFG1);
97 /* Calculate the address */
98 addr = SSB_PCI_CFG;
99 addr |= (bus << 16);
100 addr |= (dev << 11);
101 addr |= (func << 8);
102 addr |= (off & ~3);
103 }
104out:
105 return addr;
106}
107
108static int ssb_extpci_read_config(struct ssb_pcicore *pc,
109 unsigned int bus, unsigned int dev,
110 unsigned int func, unsigned int off,
111 void *buf, int len)
112{
113 int err = -EINVAL;
114 u32 addr, val;
115 void __iomem *mmio;
116
117 SSB_WARN_ON(!pc->hostmode);
118 if (unlikely(len != 1 && len != 2 && len != 4))
119 goto out;
120 addr = get_cfgspace_addr(pc, bus, dev, func, off);
121 if (unlikely(!addr))
122 goto out;
123 err = -ENOMEM;
124 mmio = ioremap_nocache(addr, len);
125 if (!mmio)
126 goto out;
127
128 if (mips_busprobe32(val, mmio)) {
129 val = 0xffffffff;
130 goto unmap;
131 }
132
133 val = readl(mmio);
134 val >>= (8 * (off & 3));
135
136 switch (len) {
137 case 1:
138 *((u8 *)buf) = (u8)val;
139 break;
140 case 2:
141 *((u16 *)buf) = (u16)val;
142 break;
143 case 4:
144 *((u32 *)buf) = (u32)val;
145 break;
146 }
147 err = 0;
148unmap:
149 iounmap(mmio);
150out:
151 return err;
152}
153
154static int ssb_extpci_write_config(struct ssb_pcicore *pc,
155 unsigned int bus, unsigned int dev,
156 unsigned int func, unsigned int off,
157 const void *buf, int len)
158{
159 int err = -EINVAL;
160 u32 addr, val = 0;
161 void __iomem *mmio;
162
163 SSB_WARN_ON(!pc->hostmode);
164 if (unlikely(len != 1 && len != 2 && len != 4))
165 goto out;
166 addr = get_cfgspace_addr(pc, bus, dev, func, off);
167 if (unlikely(!addr))
168 goto out;
169 err = -ENOMEM;
170 mmio = ioremap_nocache(addr, len);
171 if (!mmio)
172 goto out;
173
174 if (mips_busprobe32(val, mmio)) {
175 val = 0xffffffff;
176 goto unmap;
177 }
178
179 switch (len) {
180 case 1:
181 val = readl(mmio);
182 val &= ~(0xFF << (8 * (off & 3)));
183 val |= *((const u8 *)buf) << (8 * (off & 3));
184 break;
185 case 2:
186 val = readl(mmio);
187 val &= ~(0xFFFF << (8 * (off & 3)));
188 val |= *((const u16 *)buf) << (8 * (off & 3));
189 break;
190 case 4:
191 val = *((const u32 *)buf);
192 break;
193 }
194 writel(val, mmio);
195
196 err = 0;
197unmap:
198 iounmap(mmio);
199out:
200 return err;
201}
202
203static int ssb_pcicore_read_config(struct pci_bus *bus, unsigned int devfn,
204 int reg, int size, u32 *val)
205{
206 unsigned long flags;
207 int err;
208
209 spin_lock_irqsave(&cfgspace_lock, flags);
210 err = ssb_extpci_read_config(extpci_core, bus->number, PCI_SLOT(devfn),
211 PCI_FUNC(devfn), reg, val, size);
212 spin_unlock_irqrestore(&cfgspace_lock, flags);
213
214 return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
215}
216
217static int ssb_pcicore_write_config(struct pci_bus *bus, unsigned int devfn,
218 int reg, int size, u32 val)
219{
220 unsigned long flags;
221 int err;
222
223 spin_lock_irqsave(&cfgspace_lock, flags);
224 err = ssb_extpci_write_config(extpci_core, bus->number, PCI_SLOT(devfn),
225 PCI_FUNC(devfn), reg, &val, size);
226 spin_unlock_irqrestore(&cfgspace_lock, flags);
227
228 return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
229}
230
231static struct pci_ops ssb_pcicore_pciops = {
232 .read = ssb_pcicore_read_config,
233 .write = ssb_pcicore_write_config,
234};
235
236static struct resource ssb_pcicore_mem_resource = {
237 .name = "SSB PCIcore external memory",
238 .start = SSB_PCI_DMA,
239 .end = SSB_PCI_DMA + SSB_PCI_DMA_SZ - 1,
Michael Bueschfc71acc2008-02-16 18:13:36 +0100240 .flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED,
Michael Buesch61e115a2007-09-18 15:12:50 -0400241};
242
243static struct resource ssb_pcicore_io_resource = {
244 .name = "SSB PCIcore external I/O",
245 .start = 0x100,
246 .end = 0x7FF,
Michael Bueschfc71acc2008-02-16 18:13:36 +0100247 .flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED,
Michael Buesch61e115a2007-09-18 15:12:50 -0400248};
249
250static struct pci_controller ssb_pcicore_controller = {
251 .pci_ops = &ssb_pcicore_pciops,
252 .io_resource = &ssb_pcicore_io_resource,
253 .mem_resource = &ssb_pcicore_mem_resource,
Michael Buesch61e115a2007-09-18 15:12:50 -0400254};
255
Michael Bueschaab547c2008-02-29 11:36:12 +0100256/* This function is called when doing a pci_enable_device().
257 * We must first check if the device is a device on the PCI-core bridge. */
258int ssb_pcicore_plat_dev_init(struct pci_dev *d)
259{
Michael Bueschaab547c2008-02-29 11:36:12 +0100260 if (d->bus->ops != &ssb_pcicore_pciops) {
261 /* This is not a device on the PCI-core bridge. */
262 return -ENODEV;
263 }
264
265 ssb_printk(KERN_INFO "PCI: Fixing up device %s\n",
266 pci_name(d));
267
Michael Bueschaab547c2008-02-29 11:36:12 +0100268 /* Fix up interrupt lines */
269 d->irq = ssb_mips_irq(extpci_core->dev) + 2;
270 pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq);
271
272 return 0;
273}
274
275/* Early PCI fixup for a device on the PCI-core bridge. */
276static void ssb_pcicore_fixup_pcibridge(struct pci_dev *dev)
277{
278 u8 lat;
279
280 if (dev->bus->ops != &ssb_pcicore_pciops) {
281 /* This is not a device on the PCI-core bridge. */
282 return;
283 }
284 if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0)
285 return;
286
287 ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev));
288
289 /* Enable PCI bridge bus mastering and memory space */
290 pci_set_master(dev);
291 if (pcibios_enable_device(dev, ~0) < 0) {
292 ssb_printk(KERN_ERR "PCI: SSB bridge enable failed\n");
293 return;
294 }
295
296 /* Enable PCI bridge BAR1 prefetch and burst */
297 pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3);
298
299 /* Make sure our latency is high enough to handle the devices behind us */
300 lat = 168;
301 ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n",
302 pci_name(dev), lat);
303 pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
304}
305DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_pcicore_fixup_pcibridge);
306
307/* PCI device IRQ mapping. */
308int ssb_pcicore_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
309{
310 if (dev->bus->ops != &ssb_pcicore_pciops) {
311 /* This is not a device on the PCI-core bridge. */
312 return -ENODEV;
313 }
314 return ssb_mips_irq(extpci_core->dev) + 2;
315}
316
Hauke Mehrtenscd155982011-06-21 20:57:16 +0200317static void __devinit ssb_pcicore_init_hostmode(struct ssb_pcicore *pc)
Michael Buesch61e115a2007-09-18 15:12:50 -0400318{
319 u32 val;
320
321 if (WARN_ON(extpci_core))
322 return;
323 extpci_core = pc;
324
325 ssb_dprintk(KERN_INFO PFX "PCIcore in host mode found\n");
326 /* Reset devices on the external PCI bus */
327 val = SSB_PCICORE_CTL_RST_OE;
328 val |= SSB_PCICORE_CTL_CLK_OE;
329 pcicore_write32(pc, SSB_PCICORE_CTL, val);
330 val |= SSB_PCICORE_CTL_CLK; /* Clock on */
331 pcicore_write32(pc, SSB_PCICORE_CTL, val);
332 udelay(150); /* Assertion time demanded by the PCI standard */
333 val |= SSB_PCICORE_CTL_RST; /* Deassert RST# */
334 pcicore_write32(pc, SSB_PCICORE_CTL, val);
335 val = SSB_PCICORE_ARBCTL_INTERN;
336 pcicore_write32(pc, SSB_PCICORE_ARBCTL, val);
337 udelay(1); /* Assertion time demanded by the PCI standard */
338
Michael Buesch7cb44612008-02-19 17:46:48 +0100339 if (pc->dev->bus->has_cardbus_slot) {
340 ssb_dprintk(KERN_INFO PFX "CardBus slot detected\n");
341 pc->cardbusmode = 1;
342 /* GPIO 1 resets the bridge */
343 ssb_gpio_out(pc->dev->bus, 1, 1);
344 ssb_gpio_outen(pc->dev->bus, 1, 1);
345 pcicore_write16(pc, SSB_PCICORE_SPROM(0),
346 pcicore_read16(pc, SSB_PCICORE_SPROM(0))
347 | 0x0400);
348 }
Michael Buesch61e115a2007-09-18 15:12:50 -0400349
350 /* 64MB I/O window */
351 pcicore_write32(pc, SSB_PCICORE_SBTOPCI0,
352 SSB_PCICORE_SBTOPCI_IO);
353 /* 64MB config space */
354 pcicore_write32(pc, SSB_PCICORE_SBTOPCI1,
355 SSB_PCICORE_SBTOPCI_CFG0);
356 /* 1GB memory window */
357 pcicore_write32(pc, SSB_PCICORE_SBTOPCI2,
358 SSB_PCICORE_SBTOPCI_MEM | SSB_PCI_DMA);
359
360 /* Enable PCI bridge BAR0 prefetch and burst */
361 val = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
362 ssb_extpci_write_config(pc, 0, 0, 0, PCI_COMMAND, &val, 2);
363 /* Clear error conditions */
364 val = 0;
365 ssb_extpci_write_config(pc, 0, 0, 0, PCI_STATUS, &val, 2);
366
367 /* Enable PCI interrupts */
368 pcicore_write32(pc, SSB_PCICORE_IMASK,
369 SSB_PCICORE_IMASK_INTA);
370
371 /* Ok, ready to run, register it to the system.
372 * The following needs change, if we want to port hostmode
373 * to non-MIPS platform. */
Michael Bueschfc71acc2008-02-16 18:13:36 +0100374 ssb_pcicore_controller.io_map_base = (unsigned long)ioremap_nocache(SSB_PCI_MEM, 0x04000000);
375 set_io_port_base(ssb_pcicore_controller.io_map_base);
Michael Buesch61e115a2007-09-18 15:12:50 -0400376 /* Give some time to the PCI controller to configure itself with the new
377 * values. Not waiting at this point causes crashes of the machine. */
378 mdelay(10);
379 register_pci_controller(&ssb_pcicore_controller);
380}
381
Hauke Mehrtenscd155982011-06-21 20:57:16 +0200382static int __devinit pcicore_is_in_hostmode(struct ssb_pcicore *pc)
Michael Buesch61e115a2007-09-18 15:12:50 -0400383{
384 struct ssb_bus *bus = pc->dev->bus;
385 u16 chipid_top;
386 u32 tmp;
387
388 chipid_top = (bus->chip_id & 0xFF00);
389 if (chipid_top != 0x4700 &&
390 chipid_top != 0x5300)
391 return 0;
392
Aurelien Jarno2d8d4fd2008-02-28 15:11:26 +0100393 if (bus->sprom.boardflags_lo & SSB_PCICORE_BFL_NOPCI)
Michael Buesch61e115a2007-09-18 15:12:50 -0400394 return 0;
395
396 /* The 200-pin BCM4712 package does not bond out PCI. Even when
397 * PCI is bonded out, some boards may leave the pins floating. */
398 if (bus->chip_id == 0x4712) {
399 if (bus->chip_package == SSB_CHIPPACK_BCM4712S)
400 return 0;
401 if (bus->chip_package == SSB_CHIPPACK_BCM4712M)
402 return 0;
403 }
404 if (bus->chip_id == 0x5350)
405 return 0;
406
407 return !mips_busprobe32(tmp, (bus->mmio + (pc->dev->core_index * SSB_CORE_SIZE)));
408}
409#endif /* CONFIG_SSB_PCICORE_HOSTMODE */
410
Rafał Miłeckiccc7c282011-04-01 13:26:52 +0200411/**************************************************
412 * Workarounds.
413 **************************************************/
414
Hauke Mehrtenscd155982011-06-21 20:57:16 +0200415static void __devinit ssb_pcicore_fix_sprom_core_index(struct ssb_pcicore *pc)
Rafał Miłeckiaf335a62011-04-27 18:21:34 +0200416{
417 u16 tmp = pcicore_read16(pc, SSB_PCICORE_SPROM(0));
418 if (((tmp & 0xF000) >> 12) != pc->dev->core_index) {
419 tmp &= ~0xF000;
420 tmp |= (pc->dev->core_index << 12);
421 pcicore_write16(pc, SSB_PCICORE_SPROM(0), tmp);
422 }
423}
424
Rafał Miłeckiccc7c282011-04-01 13:26:52 +0200425static u8 ssb_pcicore_polarity_workaround(struct ssb_pcicore *pc)
426{
427 return (ssb_pcie_read(pc, 0x204) & 0x10) ? 0xC0 : 0x80;
428}
429
430static void ssb_pcicore_serdes_workaround(struct ssb_pcicore *pc)
431{
432 const u8 serdes_pll_device = 0x1D;
433 const u8 serdes_rx_device = 0x1F;
434 u16 tmp;
435
436 ssb_pcie_mdio_write(pc, serdes_rx_device, 1 /* Control */,
437 ssb_pcicore_polarity_workaround(pc));
438 tmp = ssb_pcie_mdio_read(pc, serdes_pll_device, 1 /* Control */);
439 if (tmp & 0x4000)
440 ssb_pcie_mdio_write(pc, serdes_pll_device, 1, tmp & ~0x4000);
441}
Michael Buesch61e115a2007-09-18 15:12:50 -0400442
Rafał Miłecki6e914102011-04-27 17:39:47 +0200443static void ssb_pcicore_pci_setup_workarounds(struct ssb_pcicore *pc)
444{
445 struct ssb_device *pdev = pc->dev;
446 struct ssb_bus *bus = pdev->bus;
447 u32 tmp;
448
449 tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2);
450 tmp |= SSB_PCICORE_SBTOPCI_PREF;
451 tmp |= SSB_PCICORE_SBTOPCI_BURST;
452 pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp);
453
454 if (pdev->id.revision < 5) {
455 tmp = ssb_read32(pdev, SSB_IMCFGLO);
456 tmp &= ~SSB_IMCFGLO_SERTO;
457 tmp |= 2;
458 tmp &= ~SSB_IMCFGLO_REQTO;
459 tmp |= 3 << SSB_IMCFGLO_REQTO_SHIFT;
460 ssb_write32(pdev, SSB_IMCFGLO, tmp);
461 ssb_commit_settings(bus);
462 } else if (pdev->id.revision >= 11) {
463 tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2);
464 tmp |= SSB_PCICORE_SBTOPCI_MRM;
465 pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp);
466 }
467}
468
469static void ssb_pcicore_pcie_setup_workarounds(struct ssb_pcicore *pc)
470{
Rafał Miłecki6e914102011-04-27 17:39:47 +0200471 u32 tmp;
Rafał Miłecki5890a3c2011-04-27 17:39:48 +0200472 u8 rev = pc->dev->id.revision;
Rafał Miłecki6e914102011-04-27 17:39:47 +0200473
Rafał Miłecki5890a3c2011-04-27 17:39:48 +0200474 if (rev == 0 || rev == 1) {
Rafał Miłecki6e914102011-04-27 17:39:47 +0200475 /* TLP Workaround register. */
476 tmp = ssb_pcie_read(pc, 0x4);
477 tmp |= 0x8;
478 ssb_pcie_write(pc, 0x4, tmp);
479 }
Rafał Miłecki5890a3c2011-04-27 17:39:48 +0200480 if (rev == 1) {
481 /* DLLP Link Control register. */
482 tmp = ssb_pcie_read(pc, 0x100);
483 tmp |= 0x40;
484 ssb_pcie_write(pc, 0x100, tmp);
485 }
486
487 if (rev == 0) {
Rafał Miłecki6e914102011-04-27 17:39:47 +0200488 const u8 serdes_rx_device = 0x1F;
489
490 ssb_pcie_mdio_write(pc, serdes_rx_device,
491 2 /* Timer */, 0x8128);
492 ssb_pcie_mdio_write(pc, serdes_rx_device,
493 6 /* CDR */, 0x0100);
494 ssb_pcie_mdio_write(pc, serdes_rx_device,
495 7 /* CDR BW */, 0x1466);
Rafał Miłecki5890a3c2011-04-27 17:39:48 +0200496 } else if (rev == 3 || rev == 4 || rev == 5) {
497 /* TODO: DLLP Power Management Threshold */
498 ssb_pcicore_serdes_workaround(pc);
499 /* TODO: ASPM */
500 } else if (rev == 7) {
501 /* TODO: No PLL down */
502 }
503
504 if (rev >= 6) {
505 /* Miscellaneous Configuration Fixup */
506 tmp = pcicore_read16(pc, SSB_PCICORE_SPROM(5));
507 if (!(tmp & 0x8000))
508 pcicore_write16(pc, SSB_PCICORE_SPROM(5),
509 tmp | 0x8000);
Rafał Miłecki6e914102011-04-27 17:39:47 +0200510 }
511}
512
Michael Buesch61e115a2007-09-18 15:12:50 -0400513/**************************************************
514 * Generic and Clientmode operation code.
515 **************************************************/
516
Hauke Mehrtenscd155982011-06-21 20:57:16 +0200517static void __devinit ssb_pcicore_init_clientmode(struct ssb_pcicore *pc)
Michael Buesch61e115a2007-09-18 15:12:50 -0400518{
Rafał Miłecki6ae8ec22011-07-05 17:25:32 +0200519 ssb_pcicore_fix_sprom_core_index(pc);
520
Michael Buesch61e115a2007-09-18 15:12:50 -0400521 /* Disable PCI interrupts. */
522 ssb_write32(pc->dev, SSB_INTVEC, 0);
Rafał Miłecki6ae8ec22011-07-05 17:25:32 +0200523
524 /* Additional PCIe always once-executed workarounds */
525 if (pc->dev->id.coreid == SSB_DEV_PCIE) {
526 ssb_pcicore_serdes_workaround(pc);
527 /* TODO: ASPM */
528 /* TODO: Clock Request Update */
529 }
Michael Buesch61e115a2007-09-18 15:12:50 -0400530}
531
Hauke Mehrtenscd155982011-06-21 20:57:16 +0200532void __devinit ssb_pcicore_init(struct ssb_pcicore *pc)
Michael Buesch61e115a2007-09-18 15:12:50 -0400533{
534 struct ssb_device *dev = pc->dev;
Michael Buesch61e115a2007-09-18 15:12:50 -0400535
536 if (!dev)
537 return;
Michael Buesch61e115a2007-09-18 15:12:50 -0400538 if (!ssb_device_is_enabled(dev))
539 ssb_device_enable(dev, 0);
540
541#ifdef CONFIG_SSB_PCICORE_HOSTMODE
542 pc->hostmode = pcicore_is_in_hostmode(pc);
543 if (pc->hostmode)
544 ssb_pcicore_init_hostmode(pc);
545#endif /* CONFIG_SSB_PCICORE_HOSTMODE */
546 if (!pc->hostmode)
547 ssb_pcicore_init_clientmode(pc);
548}
549
550static u32 ssb_pcie_read(struct ssb_pcicore *pc, u32 address)
551{
552 pcicore_write32(pc, 0x130, address);
553 return pcicore_read32(pc, 0x134);
554}
555
556static void ssb_pcie_write(struct ssb_pcicore *pc, u32 address, u32 data)
557{
558 pcicore_write32(pc, 0x130, address);
559 pcicore_write32(pc, 0x134, data);
560}
561
Rafał Miłecki1b1c7ac2011-04-01 12:07:33 +0200562static void ssb_pcie_mdio_set_phy(struct ssb_pcicore *pc, u8 phy)
563{
564 const u16 mdio_control = 0x128;
565 const u16 mdio_data = 0x12C;
566 u32 v;
567 int i;
568
569 v = (1 << 30); /* Start of Transaction */
570 v |= (1 << 28); /* Write Transaction */
571 v |= (1 << 17); /* Turnaround */
572 v |= (0x1F << 18);
573 v |= (phy << 4);
574 pcicore_write32(pc, mdio_data, v);
575
576 udelay(10);
577 for (i = 0; i < 200; i++) {
578 v = pcicore_read32(pc, mdio_control);
579 if (v & 0x100 /* Trans complete */)
580 break;
581 msleep(1);
582 }
583}
584
Rafał Miłeckiba91d1a2011-04-01 12:07:34 +0200585static u16 ssb_pcie_mdio_read(struct ssb_pcicore *pc, u8 device, u8 address)
586{
587 const u16 mdio_control = 0x128;
588 const u16 mdio_data = 0x12C;
589 int max_retries = 10;
590 u16 ret = 0;
591 u32 v;
592 int i;
593
594 v = 0x80; /* Enable Preamble Sequence */
595 v |= 0x2; /* MDIO Clock Divisor */
596 pcicore_write32(pc, mdio_control, v);
597
598 if (pc->dev->id.revision >= 10) {
599 max_retries = 200;
600 ssb_pcie_mdio_set_phy(pc, device);
601 }
602
603 v = (1 << 30); /* Start of Transaction */
604 v |= (1 << 29); /* Read Transaction */
605 v |= (1 << 17); /* Turnaround */
606 if (pc->dev->id.revision < 10)
607 v |= (u32)device << 22;
608 v |= (u32)address << 18;
609 pcicore_write32(pc, mdio_data, v);
610 /* Wait for the device to complete the transaction */
611 udelay(10);
Rafał Miłecki9be1cb32011-04-19 22:40:22 +0200612 for (i = 0; i < max_retries; i++) {
Rafał Miłeckiba91d1a2011-04-01 12:07:34 +0200613 v = pcicore_read32(pc, mdio_control);
614 if (v & 0x100 /* Trans complete */) {
615 udelay(10);
616 ret = pcicore_read32(pc, mdio_data);
617 break;
618 }
619 msleep(1);
620 }
621 pcicore_write32(pc, mdio_control, 0);
622 return ret;
623}
Rafał Miłeckiba91d1a2011-04-01 12:07:34 +0200624
Michael Buesch61e115a2007-09-18 15:12:50 -0400625static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device,
626 u8 address, u16 data)
627{
628 const u16 mdio_control = 0x128;
629 const u16 mdio_data = 0x12C;
Rafał Miłecki1b1c7ac2011-04-01 12:07:33 +0200630 int max_retries = 10;
Michael Buesch61e115a2007-09-18 15:12:50 -0400631 u32 v;
632 int i;
633
634 v = 0x80; /* Enable Preamble Sequence */
635 v |= 0x2; /* MDIO Clock Divisor */
636 pcicore_write32(pc, mdio_control, v);
637
Rafał Miłecki1b1c7ac2011-04-01 12:07:33 +0200638 if (pc->dev->id.revision >= 10) {
639 max_retries = 200;
640 ssb_pcie_mdio_set_phy(pc, device);
641 }
642
Michael Buesch61e115a2007-09-18 15:12:50 -0400643 v = (1 << 30); /* Start of Transaction */
644 v |= (1 << 28); /* Write Transaction */
645 v |= (1 << 17); /* Turnaround */
Rafał Miłecki1b1c7ac2011-04-01 12:07:33 +0200646 if (pc->dev->id.revision < 10)
647 v |= (u32)device << 22;
Michael Buesch61e115a2007-09-18 15:12:50 -0400648 v |= (u32)address << 18;
649 v |= data;
650 pcicore_write32(pc, mdio_data, v);
651 /* Wait for the device to complete the transaction */
652 udelay(10);
Rafał Miłecki1b1c7ac2011-04-01 12:07:33 +0200653 for (i = 0; i < max_retries; i++) {
Michael Buesch61e115a2007-09-18 15:12:50 -0400654 v = pcicore_read32(pc, mdio_control);
655 if (v & 0x100 /* Trans complete */)
656 break;
657 msleep(1);
658 }
659 pcicore_write32(pc, mdio_control, 0);
660}
661
Michael Buesch61e115a2007-09-18 15:12:50 -0400662int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
663 struct ssb_device *dev)
664{
665 struct ssb_device *pdev = pc->dev;
666 struct ssb_bus *bus;
667 int err = 0;
668 u32 tmp;
669
Michael Buesch9e095a62008-07-04 23:44:37 +0200670 if (dev->bus->bustype != SSB_BUSTYPE_PCI) {
671 /* This SSB device is not on a PCI host-bus. So the IRQs are
672 * not routed through the PCI core.
673 * So we must not enable routing through the PCI core. */
674 goto out;
675 }
676
Michael Buesch61e115a2007-09-18 15:12:50 -0400677 if (!pdev)
678 goto out;
679 bus = pdev->bus;
680
Michael Buescha3bafee2008-06-02 16:15:23 +0200681 might_sleep_if(pdev->id.coreid != SSB_DEV_PCI);
682
Michael Buesch61e115a2007-09-18 15:12:50 -0400683 /* Enable interrupts for this device. */
Michael Buesch8b454992009-10-09 20:32:10 +0200684 if ((pdev->id.revision >= 6) || (pdev->id.coreid == SSB_DEV_PCIE)) {
Michael Buesch61e115a2007-09-18 15:12:50 -0400685 u32 coremask;
686
687 /* Calculate the "coremask" for the device. */
688 coremask = (1 << dev->core_index);
689
Michael Buesch8b454992009-10-09 20:32:10 +0200690 SSB_WARN_ON(bus->bustype != SSB_BUSTYPE_PCI);
Michael Buesch61e115a2007-09-18 15:12:50 -0400691 err = pci_read_config_dword(bus->host_pci, SSB_PCI_IRQMASK, &tmp);
692 if (err)
693 goto out;
694 tmp |= coremask << 8;
695 err = pci_write_config_dword(bus->host_pci, SSB_PCI_IRQMASK, tmp);
696 if (err)
697 goto out;
698 } else {
699 u32 intvec;
700
701 intvec = ssb_read32(pdev, SSB_INTVEC);
Michael Buesch51e8b882008-04-08 10:31:22 +0200702 tmp = ssb_read32(dev, SSB_TPSFLAG);
703 tmp &= SSB_TPSFLAG_BPFLAG;
704 intvec |= (1 << tmp);
Michael Buesch61e115a2007-09-18 15:12:50 -0400705 ssb_write32(pdev, SSB_INTVEC, intvec);
706 }
707
708 /* Setup PCIcore operation. */
709 if (pc->setup_done)
710 goto out;
711 if (pdev->id.coreid == SSB_DEV_PCI) {
Rafał Miłecki6e914102011-04-27 17:39:47 +0200712 ssb_pcicore_pci_setup_workarounds(pc);
Michael Buesch61e115a2007-09-18 15:12:50 -0400713 } else {
714 WARN_ON(pdev->id.coreid != SSB_DEV_PCIE);
Rafał Miłecki6e914102011-04-27 17:39:47 +0200715 ssb_pcicore_pcie_setup_workarounds(pc);
Michael Buesch61e115a2007-09-18 15:12:50 -0400716 }
717 pc->setup_done = 1;
718out:
719 return err;
720}
721EXPORT_SYMBOL(ssb_pcicore_dev_irqvecs_enable);