blob: 27c49e60b7d651e74818567d807e162fb00a298d [file] [log] [blame]
Russell King89c0b8e2011-05-08 18:47:58 +01001/*
2 * i8253 PIT clocksource
3 */
Thomas Gleixnere6220bd2011-06-09 13:08:25 +00004#include <linux/clockchips.h>
Russell King89c0b8e2011-05-08 18:47:58 +01005#include <linux/init.h>
6#include <linux/io.h>
7#include <linux/spinlock.h>
8#include <linux/timex.h>
Ralf Baechle15f304b2011-06-01 19:04:59 +01009#include <linux/module.h>
Ralf Baechle334955e2011-06-01 19:04:57 +010010#include <linux/i8253.h>
Thomas Gleixnere6220bd2011-06-09 13:08:25 +000011#include <linux/smp.h>
Russell King89c0b8e2011-05-08 18:47:58 +010012
13/*
Ralf Baechle15f304b2011-06-01 19:04:59 +010014 * Protects access to I/O ports
15 *
16 * 0040-0043 : timer0, i8253 / i8254
17 * 0061-0061 : NMI Control Register which contains two speaker control bits.
18 */
19DEFINE_RAW_SPINLOCK(i8253_lock);
20EXPORT_SYMBOL(i8253_lock);
21
22#ifdef CONFIG_CLKSRC_I8253
23/*
Russell King89c0b8e2011-05-08 18:47:58 +010024 * Since the PIT overflows every tick, its not very useful
25 * to just read by itself. So use jiffies to emulate a free
26 * running counter:
27 */
28static cycle_t i8253_read(struct clocksource *cs)
29{
30 static int old_count;
31 static u32 old_jifs;
32 unsigned long flags;
33 int count;
34 u32 jifs;
35
36 raw_spin_lock_irqsave(&i8253_lock, flags);
37 /*
38 * Although our caller may have the read side of xtime_lock,
39 * this is now a seqlock, and we are cheating in this routine
40 * by having side effects on state that we cannot undo if
41 * there is a collision on the seqlock and our caller has to
42 * retry. (Namely, old_jifs and old_count.) So we must treat
43 * jiffies as volatile despite the lock. We read jiffies
44 * before latching the timer count to guarantee that although
45 * the jiffies value might be older than the count (that is,
46 * the counter may underflow between the last point where
47 * jiffies was incremented and the point where we latch the
48 * count), it cannot be newer.
49 */
50 jifs = jiffies;
Thomas Gleixnere6220bd2011-06-09 13:08:25 +000051 outb_p(0x00, PIT_MODE); /* latch the count ASAP */
52 count = inb_p(PIT_CH0); /* read the latched count */
53 count |= inb_p(PIT_CH0) << 8;
Russell King89c0b8e2011-05-08 18:47:58 +010054
55 /* VIA686a test code... reset the latch if count > max + 1 */
56 if (count > LATCH) {
Thomas Gleixnere6220bd2011-06-09 13:08:25 +000057 outb_p(0x34, PIT_MODE);
58 outb_p(PIT_LATCH & 0xff, PIT_CH0);
59 outb_p(PIT_LATCH >> 8, PIT_CH0);
Russell King89c0b8e2011-05-08 18:47:58 +010060 count = PIT_LATCH - 1;
61 }
62
63 /*
64 * It's possible for count to appear to go the wrong way for a
65 * couple of reasons:
66 *
67 * 1. The timer counter underflows, but we haven't handled the
68 * resulting interrupt and incremented jiffies yet.
69 * 2. Hardware problem with the timer, not giving us continuous time,
70 * the counter does small "jumps" upwards on some Pentium systems,
71 * (see c't 95/10 page 335 for Neptun bug.)
72 *
73 * Previous attempts to handle these cases intelligently were
74 * buggy, so we just do the simple thing now.
75 */
76 if (count > old_count && jifs == old_jifs)
77 count = old_count;
78
79 old_count = count;
80 old_jifs = jifs;
81
82 raw_spin_unlock_irqrestore(&i8253_lock, flags);
83
84 count = (PIT_LATCH - 1) - count;
85
86 return (cycle_t)(jifs * PIT_LATCH) + count;
87}
88
89static struct clocksource i8253_cs = {
90 .name = "pit",
91 .rating = 110,
92 .read = i8253_read,
93 .mask = CLOCKSOURCE_MASK(32),
94};
95
96int __init clocksource_i8253_init(void)
97{
98 return clocksource_register_hz(&i8253_cs, PIT_TICK_RATE);
99}
Ralf Baechle15f304b2011-06-01 19:04:59 +0100100#endif
Thomas Gleixnere6220bd2011-06-09 13:08:25 +0000101
102#ifdef CONFIG_CLKEVT_I8253
103/*
104 * Initialize the PIT timer.
105 *
106 * This is also called after resume to bring the PIT into operation again.
107 */
108static void init_pit_timer(enum clock_event_mode mode,
109 struct clock_event_device *evt)
110{
111 raw_spin_lock(&i8253_lock);
112
113 switch (mode) {
114 case CLOCK_EVT_MODE_PERIODIC:
115 /* binary, mode 2, LSB/MSB, ch 0 */
116 outb_p(0x34, PIT_MODE);
117 outb_p(LATCH & 0xff , PIT_CH0); /* LSB */
118 outb_p(LATCH >> 8 , PIT_CH0); /* MSB */
119 break;
120
121 case CLOCK_EVT_MODE_SHUTDOWN:
122 case CLOCK_EVT_MODE_UNUSED:
123 if (evt->mode == CLOCK_EVT_MODE_PERIODIC ||
124 evt->mode == CLOCK_EVT_MODE_ONESHOT) {
125 outb_p(0x30, PIT_MODE);
126 outb_p(0, PIT_CH0);
127 outb_p(0, PIT_CH0);
128 }
129 break;
130
131 case CLOCK_EVT_MODE_ONESHOT:
132 /* One shot setup */
133 outb_p(0x38, PIT_MODE);
134 break;
135
136 case CLOCK_EVT_MODE_RESUME:
137 /* Nothing to do here */
138 break;
139 }
140 raw_spin_unlock(&i8253_lock);
141}
142
143/*
144 * Program the next event in oneshot mode
145 *
146 * Delta is given in PIT ticks
147 */
148static int pit_next_event(unsigned long delta, struct clock_event_device *evt)
149{
150 raw_spin_lock(&i8253_lock);
151 outb_p(delta & 0xff , PIT_CH0); /* LSB */
152 outb_p(delta >> 8 , PIT_CH0); /* MSB */
153 raw_spin_unlock(&i8253_lock);
154
155 return 0;
156}
157
158/*
159 * On UP the PIT can serve all of the possible timer functions. On SMP systems
160 * it can be solely used for the global tick.
161 */
162struct clock_event_device i8253_clockevent = {
163 .name = "pit",
164 .features = CLOCK_EVT_FEAT_PERIODIC,
165 .set_mode = init_pit_timer,
166 .set_next_event = pit_next_event,
167};
168
169/*
170 * Initialize the conversion factor and the min/max deltas of the clock event
171 * structure and register the clock event source with the framework.
172 */
173void __init clockevent_i8253_init(bool oneshot)
174{
175 if (oneshot)
176 i8253_clockevent.features |= CLOCK_EVT_FEAT_ONESHOT;
177 /*
178 * Start pit with the boot cpu mask. x86 might make it global
179 * when it is used as broadcast device later.
180 */
181 i8253_clockevent.cpumask = cpumask_of(smp_processor_id());
182
183 clockevents_config_and_register(&i8253_clockevent, PIT_TICK_RATE,
184 0xF, 0x7FFF);
185}
186#endif