Johnny Kim | c5c77ba | 2015-05-11 14:30:56 +0900 | [diff] [blame^] | 1 | /* ////////////////////////////////////////////////////////////////////////// */ |
| 2 | /* */ |
| 3 | /* Copyright (c) Atmel Corporation. All rights reserved. */ |
| 4 | /* */ |
| 5 | /* Module Name: wilc_wlan_if.h */ |
| 6 | /* */ |
| 7 | /* */ |
| 8 | /* ///////////////////////////////////////////////////////////////////////// */ |
| 9 | |
| 10 | |
| 11 | #ifndef WILC_WLAN_IF_H |
| 12 | #define WILC_WLAN_IF_H |
| 13 | |
| 14 | /*bug 3887: [AP] Allow Management frames to be passed to the host*/ |
| 15 | #define WILC_AP_EXTERNAL_MLME |
| 16 | #define WILC_P2P |
| 17 | #define TCP_ENHANCEMENTS |
| 18 | /* #define MEMORY_STATIC */ |
| 19 | /* #define WILC_FULLY_HOSTING_AP */ |
| 20 | /* #define USE_OLD_SPI_SW */ |
| 21 | |
| 22 | |
| 23 | #include "wilc_type.h" |
| 24 | #include "linux_wlan_common.h" |
| 25 | |
| 26 | |
| 27 | /******************************************** |
| 28 | * |
| 29 | * Debug Flags |
| 30 | * |
| 31 | ********************************************/ |
| 32 | |
| 33 | #define N_INIT 0x00000001 |
| 34 | #define N_ERR 0x00000002 |
| 35 | #define N_TXQ 0x00000004 |
| 36 | #define N_INTR 0x00000008 |
| 37 | #define N_RXQ 0x00000010 |
| 38 | |
| 39 | /******************************************** |
| 40 | * |
| 41 | * Host Interface Defines |
| 42 | * |
| 43 | ********************************************/ |
| 44 | |
| 45 | #define HIF_SDIO (0) |
| 46 | #define HIF_SPI (1 << 0) |
| 47 | #define HIF_SDIO_GPIO_IRQ (1 << 2) |
| 48 | |
| 49 | |
| 50 | /******************************************** |
| 51 | * |
| 52 | * Tx/Rx Buffer Size Defines |
| 53 | * |
| 54 | ********************************************/ |
| 55 | |
| 56 | #define CE_TX_BUFFER_SIZE (64 * 1024) |
| 57 | #define CE_RX_BUFFER_SIZE (384 * 1024) |
| 58 | |
| 59 | /******************************************** |
| 60 | * |
| 61 | * Wlan Interface Defines |
| 62 | * |
| 63 | ********************************************/ |
| 64 | |
| 65 | typedef struct { |
| 66 | uint32_t read_write: 1; |
| 67 | uint32_t function: 3; |
| 68 | uint32_t raw: 1; |
| 69 | uint32_t address: 17; |
| 70 | uint32_t data: 8; |
| 71 | } sdio_cmd52_t; |
| 72 | |
| 73 | typedef struct { |
| 74 | /* struct { */ |
| 75 | uint32_t read_write: 1; |
| 76 | uint32_t function: 3; |
| 77 | uint32_t block_mode: 1; |
| 78 | uint32_t increment: 1; |
| 79 | uint32_t address: 17; |
| 80 | uint32_t count: 9; |
| 81 | /* } bit; */ |
| 82 | uint8_t *buffer; |
| 83 | uint32_t block_size; |
| 84 | } sdio_cmd53_t; |
| 85 | |
| 86 | typedef struct { |
| 87 | void (*os_sleep)(uint32_t); |
| 88 | void (*os_atomic_sleep)(uint32_t); |
| 89 | void (*os_debug)(uint8_t *); |
| 90 | void *(*os_malloc)(uint32_t); |
| 91 | void *(*os_malloc_atomic)(uint32_t); |
| 92 | void (*os_free)(void *); |
| 93 | void (*os_lock)(void *); |
| 94 | void (*os_unlock)(void *); |
| 95 | int (*os_wait)(void *, WILC_Uint32); |
| 96 | void (*os_signal)(void *); |
| 97 | void (*os_enter_cs)(void *); |
| 98 | void (*os_leave_cs)(void *); |
| 99 | |
| 100 | /*Added by Amr - BugID_4720*/ |
| 101 | void (*os_spin_lock)(void *, unsigned long *); |
| 102 | void (*os_spin_unlock)(void *, unsigned long *); |
| 103 | |
| 104 | } wilc_wlan_os_func_t; |
| 105 | |
| 106 | typedef struct { |
| 107 | int io_type; |
| 108 | int (*io_init)(void *); |
| 109 | void (*io_deinit)(void *); |
| 110 | union { |
| 111 | struct { |
| 112 | int (*sdio_cmd52)(sdio_cmd52_t *); |
| 113 | int (*sdio_cmd53)(sdio_cmd53_t *); |
| 114 | int (*sdio_set_max_speed)(void); |
| 115 | int (*sdio_set_default_speed)(void); |
| 116 | } sdio; |
| 117 | struct { |
| 118 | int (*spi_max_speed)(void); |
| 119 | int (*spi_tx)(uint8_t *, uint32_t); |
| 120 | int (*spi_rx)(uint8_t *, uint32_t); |
| 121 | int (*spi_trx)(uint8_t *, uint8_t *, uint32_t); |
| 122 | } spi; |
| 123 | } u; |
| 124 | } wilc_wlan_io_func_t; |
| 125 | |
| 126 | typedef struct { |
| 127 | void (*rx_indicate)(uint8_t *, uint32_t, uint32_t); |
| 128 | void (*rx_complete)(void); |
| 129 | } wilc_wlan_net_func_t; |
| 130 | |
| 131 | typedef struct { |
| 132 | void (*mac_indicate)(int); |
| 133 | } wilc_wlan_indicate_func_t; |
| 134 | #define WILC_MAC_INDICATE_STATUS 0x1 |
| 135 | #define WILC_MAC_STATUS_INIT -1 |
| 136 | #define WILC_MAC_STATUS_READY 0 |
| 137 | #define WILC_MAC_STATUS_CONNECT 1 |
| 138 | |
| 139 | #define WILC_MAC_INDICATE_SCAN 0x2 |
| 140 | |
| 141 | typedef struct { |
| 142 | void *os_private; |
| 143 | |
| 144 | void *hif_critical_section; |
| 145 | |
| 146 | uint32_t tx_buffer_size; |
| 147 | void *txq_critical_section; |
| 148 | |
| 149 | /*Added by Amr - BugID_4720*/ |
| 150 | void *txq_add_to_head_critical_section; |
| 151 | void *txq_spin_lock; |
| 152 | |
| 153 | void *txq_wait_event; |
| 154 | |
| 155 | #if defined(MEMORY_STATIC) |
| 156 | uint32_t rx_buffer_size; |
| 157 | #endif |
| 158 | void *rxq_critical_section; |
| 159 | void *rxq_wait_event; |
| 160 | |
| 161 | void *cfg_wait_event; |
| 162 | } wilc_wlan_os_context_t; |
| 163 | |
| 164 | typedef struct { |
| 165 | wilc_wlan_os_context_t os_context; |
| 166 | wilc_wlan_os_func_t os_func; |
| 167 | wilc_wlan_io_func_t io_func; |
| 168 | wilc_wlan_net_func_t net_func; |
| 169 | wilc_wlan_indicate_func_t indicate_func; |
| 170 | } wilc_wlan_inp_t; |
| 171 | |
| 172 | #if 0 |
| 173 | typedef struct { |
| 174 | int start; |
| 175 | uint32_t id; |
| 176 | void *buffer; |
| 177 | uint32_t buffer_size; |
| 178 | int commit; |
| 179 | } wilc_wlan_cfg_set_t; |
| 180 | |
| 181 | typedef struct { |
| 182 | int start; |
| 183 | uint32_t id; |
| 184 | int commit; |
| 185 | } wilc_wlan_cfg_get_t; |
| 186 | |
| 187 | typedef struct { |
| 188 | uint32_t id; |
| 189 | void *buffer; |
| 190 | uint32_t buffer_size; |
| 191 | } wilc_wlan_cfg_val_t; |
| 192 | #endif |
| 193 | |
| 194 | struct tx_complete_data { |
| 195 | #ifdef WILC_FULLY_HOSTING_AP |
| 196 | struct tx_complete_data *next; |
| 197 | #endif |
| 198 | int size; |
| 199 | void *buff; |
| 200 | uint8_t *pBssid; |
| 201 | struct sk_buff *skb; |
| 202 | }; |
| 203 | |
| 204 | |
| 205 | typedef void (*wilc_tx_complete_func_t)(void *, int); |
| 206 | |
| 207 | #define WILC_TX_ERR_NO_BUF (-2) |
| 208 | |
| 209 | typedef struct { |
| 210 | int (*wlan_firmware_download)(const uint8_t *, uint32_t); |
| 211 | int (*wlan_start)(void); |
| 212 | int (*wlan_stop)(void); |
| 213 | int (*wlan_add_to_tx_que)(void *, uint8_t *, uint32_t, wilc_tx_complete_func_t); |
| 214 | int (*wlan_handle_tx_que)(uint32_t *); |
| 215 | void (*wlan_handle_rx_que)(void); |
| 216 | void (*wlan_handle_rx_isr)(void); |
| 217 | void (*wlan_cleanup)(void); |
| 218 | int (*wlan_cfg_set)(int, uint32_t, uint8_t *, uint32_t, int, uint32_t); |
| 219 | int (*wlan_cfg_get)(int, uint32_t, int, uint32_t); |
| 220 | int (*wlan_cfg_get_value)(uint32_t, uint8_t *, uint32_t); |
| 221 | /*Bug3959: transmitting mgmt frames received from host*/ |
| 222 | #if defined(WILC_AP_EXTERNAL_MLME) || defined(WILC_P2P) |
| 223 | int (*wlan_add_mgmt_to_tx_que)(void *, uint8_t *, uint32_t, wilc_tx_complete_func_t); |
| 224 | |
| 225 | #ifdef WILC_FULLY_HOSTING_AP |
| 226 | int (*wlan_add_data_to_tx_que)(void *, uint8_t *, uint32_t, wilc_tx_complete_func_t); |
| 227 | #endif |
| 228 | |
| 229 | #endif |
| 230 | } wilc_wlan_oup_t; |
| 231 | |
| 232 | /******************************************** |
| 233 | * |
| 234 | * Wlan Configuration ID |
| 235 | * |
| 236 | ********************************************/ |
| 237 | |
| 238 | #define MAX_SSID_LEN 33 |
| 239 | #define MAX_RATES_SUPPORTED 12 |
| 240 | |
| 241 | #define INFINITE_SLEEP_TIME ((WILC_Uint32)0xFFFFFFFF) |
| 242 | |
| 243 | #ifdef WILC_PARSE_SCAN_IN_HOST |
| 244 | typedef enum { |
| 245 | SUPP_RATES_IE = 1, |
| 246 | EXT_SUPP_RATES_IE = 50, |
| 247 | HT_CAPABILITY_IE = 45, |
| 248 | RSN_IE = 48, |
| 249 | WPA_IE = 221, |
| 250 | WMM_IE = 221, |
| 251 | #ifdef WILC_P2P |
| 252 | P2P_IE = 221, |
| 253 | #endif |
| 254 | } BEACON_IE; |
| 255 | #endif |
| 256 | typedef enum { |
| 257 | INFRASTRUCTURE = 0, |
| 258 | INDEPENDENT, |
| 259 | AP, |
| 260 | } BSSTYPE_T; |
| 261 | |
| 262 | typedef enum { |
| 263 | RATE_AUTO = 0, |
| 264 | RATE_1MB = 1, |
| 265 | RATE_2MB = 2, |
| 266 | RATE_5MB = 5, |
| 267 | RATE_6MB = 6, |
| 268 | RATE_9MB = 9, |
| 269 | RATE_11MB = 11, |
| 270 | RATE_12MB = 12, |
| 271 | RATE_18MB = 18, |
| 272 | RATE_24MB = 24, |
| 273 | RATE_26MB = 36, |
| 274 | RATE_48MB = 48, |
| 275 | RATE_54MB = 54 |
| 276 | } TX_RATE_T; |
| 277 | |
| 278 | typedef enum { |
| 279 | B_ONLY_MODE = 0, /* basic rate: 1, 2 Mbps, otherwise: 5, 11 Mbps */ |
| 280 | G_ONLY_MODE, /* basic rate: 6, 12, 24 Mbps, otherwise: 9, 18, 36, 48, 54 Mbps */ |
| 281 | G_MIXED_11B_1_MODE, /* basic rate: 1, 2, 5.5, 11 Mbps, otherwise: all on */ |
| 282 | G_MIXED_11B_2_MODE, /* basic rate: 1, 2, 5, 11, 6, 12, 24 Mbps, otherwise: all on */ |
| 283 | } G_OPERATING_MODE_T; |
| 284 | |
| 285 | typedef enum { |
| 286 | G_SHORT_PREAMBLE = 0, /* Short Preamble */ |
| 287 | G_LONG_PREAMBLE = 1, /* Long Preamble */ |
| 288 | G_AUTO_PREAMBLE = 2, /* Auto Preamble Selection */ |
| 289 | } G_PREAMBLE_T; |
| 290 | |
| 291 | #define MAC_CONNECTED 1 |
| 292 | #define MAC_DISCONNECTED 0 |
| 293 | |
| 294 | /*bug3819: */ |
| 295 | #define SCAN_DONE TRUE |
| 296 | typedef enum { |
| 297 | PASSIVE_SCAN = 0, |
| 298 | ACTIVE_SCAN = 1, |
| 299 | } SCANTYPE_T; |
| 300 | |
| 301 | typedef enum { |
| 302 | NO_POWERSAVE = 0, |
| 303 | MIN_FAST_PS = 1, |
| 304 | MAX_FAST_PS = 2, |
| 305 | MIN_PSPOLL_PS = 3, |
| 306 | MAX_PSPOLL_PS = 4 |
| 307 | } USER_PS_MODE_T; |
| 308 | |
| 309 | typedef enum { |
| 310 | CHIP_WAKEDUP = 0, |
| 311 | CHIP_SLEEPING_AUTO = 1, |
| 312 | CHIP_SLEEPING_MANUAL = 2 |
| 313 | } CHIP_PS_STATE_T; |
| 314 | |
| 315 | typedef enum { |
| 316 | ACQUIRE_ONLY = 0, |
| 317 | ACQUIRE_AND_WAKEUP = 1, |
| 318 | } BUS_ACQUIRE_T; |
| 319 | |
| 320 | typedef enum { |
| 321 | RELEASE_ONLY = 0, |
| 322 | RELEASE_ALLOW_SLEEP = 1, |
| 323 | } BUS_RELEASE_T; |
| 324 | |
| 325 | typedef enum { |
| 326 | NO_SECURITY = 0, |
| 327 | WEP_40 = 0x3, |
| 328 | WEP_104 = 0x7, |
| 329 | WPA_AES = 0x29, |
| 330 | WPA_TKIP = 0x49, |
| 331 | WPA_AES_TKIP = 0x69, /* Aes or Tkip */ |
| 332 | WPA2_AES = 0x31, |
| 333 | WPA2_TKIP = 0x51, |
| 334 | WPA2_AES_TKIP = 0x71, /* Aes or Tkip */ |
| 335 | } SECURITY_T; |
| 336 | |
| 337 | typedef enum { |
| 338 | OPEN_SYSTEM = 1, |
| 339 | SHARED_KEY = 2, |
| 340 | ANY = 3, |
| 341 | IEEE8021 = 5 |
| 342 | } AUTHTYPE_T; |
| 343 | |
| 344 | typedef enum { |
| 345 | SITE_SURVEY_1CH = 0, |
| 346 | SITE_SURVEY_ALL_CH = 1, |
| 347 | SITE_SURVEY_OFF = 2 |
| 348 | } SITE_SURVEY_T; |
| 349 | |
| 350 | typedef enum { |
| 351 | NORMAL_ACK = 0, |
| 352 | NO_ACK, |
| 353 | } ACK_POLICY_T; |
| 354 | |
| 355 | typedef enum { |
| 356 | DONT_RESET = 0, |
| 357 | DO_RESET = 1, |
| 358 | NO_REQUEST = 2, |
| 359 | } RESET_REQ_T; |
| 360 | |
| 361 | typedef enum { |
| 362 | REKEY_DISABLE = 1, |
| 363 | REKEY_TIME_BASE, |
| 364 | REKEY_PKT_BASE, |
| 365 | REKEY_TIME_PKT_BASE |
| 366 | } RSNA_REKEY_POLICY_T; |
| 367 | |
| 368 | typedef enum { |
| 369 | FILTER_NO = 0x00, |
| 370 | FILTER_AP_ONLY = 0x01, |
| 371 | FILTER_STA_ONLY = 0x02 |
| 372 | } SCAN_CLASS_FITLER_T; |
| 373 | |
| 374 | typedef enum { |
| 375 | PRI_HIGH_RSSI = 0x00, |
| 376 | PRI_LOW_RSSI = 0x04, |
| 377 | PRI_DETECT = 0x08 |
| 378 | } SCAN_PRI_T; |
| 379 | |
| 380 | typedef enum { |
| 381 | CH_FILTER_OFF = 0x00, |
| 382 | CH_FILTER_ON = 0x10 |
| 383 | } CH_FILTER_T; |
| 384 | |
| 385 | typedef enum { |
| 386 | AUTO_PROT = 0, /* Auto */ |
| 387 | NO_PROT, /* Do not use any protection */ |
| 388 | ERP_PROT, /* Protect all ERP frame exchanges */ |
| 389 | HT_PROT, /* Protect all HT frame exchanges */ |
| 390 | GF_PROT, /* Protect all GF frame exchanges */ |
| 391 | } N_PROTECTION_MODE_T; |
| 392 | |
| 393 | typedef enum { |
| 394 | G_SELF_CTS_PROT, |
| 395 | G_RTS_CTS_PROT, |
| 396 | } G_PROTECTION_MODE_T; |
| 397 | |
| 398 | typedef enum { |
| 399 | HT_MIXED_MODE = 1, |
| 400 | HT_ONLY_20MHZ_MODE, |
| 401 | HT_ONLY_20_40MHZ_MODE, |
| 402 | } N_OPERATING_MODE_T; |
| 403 | |
| 404 | typedef enum { |
| 405 | NO_DETECT = 0, |
| 406 | DETECT_ONLY = 1, |
| 407 | DETECT_PROTECT = 2, |
| 408 | DETECT_PROTECT_REPORT = 3, |
| 409 | } N_OBSS_DETECTION_T; |
| 410 | |
| 411 | typedef enum { |
| 412 | RTS_CTS_NONHT_PROT = 0, /* RTS-CTS at non-HT rate */ |
| 413 | FIRST_FRAME_NONHT_PROT, /* First frame at non-HT rate */ |
| 414 | LSIG_TXOP_PROT, /* LSIG TXOP Protection */ |
| 415 | FIRST_FRAME_MIXED_PROT, /* First frame at Mixed format */ |
| 416 | } N_PROTECTION_TYPE_T; |
| 417 | |
| 418 | typedef enum { |
| 419 | STATIC_MODE = 1, |
| 420 | DYNAMIC_MODE = 2, |
| 421 | MIMO_MODE = 3, /* power save disable */ |
| 422 | } N_SMPS_MODE_T; |
| 423 | |
| 424 | typedef enum { |
| 425 | DISABLE_SELF_CTS, |
| 426 | ENABLE_SELF_CTS, |
| 427 | DISABLE_TX_ABORT, |
| 428 | ENABLE_TX_ABORT, |
| 429 | HW_TRIGGER_ABORT, |
| 430 | SW_TRIGGER_ABORT, |
| 431 | } TX_ABORT_OPTION_T; |
| 432 | |
| 433 | typedef enum { |
| 434 | WID_CHAR = 0, |
| 435 | WID_SHORT = 1, |
| 436 | WID_INT = 2, |
| 437 | WID_STR = 3, |
| 438 | WID_BIN_DATA = 4, |
| 439 | WID_BIN = 5, |
| 440 | WID_IP = 6, |
| 441 | WID_ADR = 7, |
| 442 | WID_UNDEF = 8, |
| 443 | WID_TYPE_FORCE_32BIT = 0xFFFFFFFF |
| 444 | |
| 445 | } WID_TYPE_T, tenuWIDtype; |
| 446 | |
| 447 | typedef enum { |
| 448 | WID_NIL = 0xffff, |
| 449 | |
| 450 | |
| 451 | /* BSS Type */ |
| 452 | /* -------------------------------------------------------------- */ |
| 453 | /* Configuration : Infrastructure Independent Access Point */ |
| 454 | /* Values to set : 0 1 2 */ |
| 455 | /* -------------------------------------------------------------- */ |
| 456 | WID_BSS_TYPE = 0x0000, |
| 457 | |
| 458 | /* Transmit Rate */ |
| 459 | /* -------------------------------------------------------------- */ |
| 460 | /* Configuration : 1 2 5.5 11 6 9 12 18 24 36 48 54 */ |
| 461 | /* Values to set : 1 2 5 11 6 9 12 18 24 36 48 54 */ |
| 462 | /* -------------------------------------------------------------- */ |
| 463 | WID_CURRENT_TX_RATE = 0x0001, |
| 464 | |
| 465 | /* Channel */ |
| 466 | /* ------------------------------------------------------------------- */ |
| 467 | /* Configuration(g) : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 */ |
| 468 | /* Values to set : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 */ |
| 469 | /* -------------------------------------------------------------------- */ |
| 470 | WID_CURRENT_CHANNEL = 0x0002, |
| 471 | |
| 472 | /* Preamble */ |
| 473 | /* -------------------------------------------------------------- */ |
| 474 | /* Configuration : short long Auto */ |
| 475 | /* Values to set : 0 1 2 */ |
| 476 | /* -------------------------------------------------------------- */ |
| 477 | WID_PREAMBLE = 0x0003, |
| 478 | |
| 479 | /* 11g operating mode (ignored if 11g not present) */ |
| 480 | /* -------------------------------------------------------------- */ |
| 481 | /* Configuration : HighPerf Compat(RSet #1) Compat(RSet #2) */ |
| 482 | /* Values to set : 1 2 3 */ |
| 483 | /* -------------------------------------------------------------- */ |
| 484 | WID_11G_OPERATING_MODE = 0x0004, |
| 485 | |
| 486 | /* Mac status (response only) */ |
| 487 | /* -------------------------------------------------------------- */ |
| 488 | /* Configuration : disconnect connect */ |
| 489 | /* Values to get : 0 1 */ |
| 490 | /* -------------------------------------------------------------- */ |
| 491 | WID_STATUS = 0x0005, |
| 492 | |
| 493 | /* Scan type */ |
| 494 | /* -------------------------------------------------------------- */ |
| 495 | /* Configuration : Passive Scanning Active Scanning */ |
| 496 | /* Values to set : 0 1 */ |
| 497 | /* -------------------------------------------------------------- */ |
| 498 | WID_SCAN_TYPE = 0x0007, |
| 499 | |
| 500 | /* Key Id (WEP default key Id) */ |
| 501 | /* -------------------------------------------------------------- */ |
| 502 | /* Configuration : Any value between 0 to 3 */ |
| 503 | /* Values to set : Same value. Default is 0 */ |
| 504 | /* -------------------------------------------------------------- */ |
| 505 | WID_KEY_ID = 0x0009, |
| 506 | |
| 507 | /* QoS Enable */ |
| 508 | /* -------------------------------------------------------------- */ |
| 509 | /* Configuration : QoS Disable WMM Enable */ |
| 510 | /* Values to set : 0 1 */ |
| 511 | /* -------------------------------------------------------------- */ |
| 512 | WID_QOS_ENABLE = 0x000A, |
| 513 | |
| 514 | /* Power Management */ |
| 515 | /* ------------------------------------------------------------------ */ |
| 516 | /* Configuration : NO_POWERSAVE MIN_POWERSAVE MAX_POWERSAVE */ |
| 517 | /* Values to set : 0 1 2 */ |
| 518 | /* ------------------------------------------------------------------ */ |
| 519 | WID_POWER_MANAGEMENT = 0x000B, |
| 520 | |
| 521 | /* WEP/802 11I Configuration */ |
| 522 | /* ------------------------------------------------------------------ */ |
| 523 | /* Configuration : Disable WP40 WP104 WPA-AES WPA-TKIP RSN-AES RSN-TKIP */ |
| 524 | /* Values (0x) : 00 03 07 29 49 31 51 */ |
| 525 | /* */ |
| 526 | /* Configuration : WPA-AES+TKIP RSN-AES+TKIP */ |
| 527 | /* Values (0x) : 69 71 */ |
| 528 | /* ------------------------------------------------------------------ */ |
| 529 | WID_11I_MODE = 0x000C, |
| 530 | |
| 531 | /* WEP Configuration: Used in BSS STA mode only when WEP is enabled */ |
| 532 | /* ------------------------------------------------------------------ */ |
| 533 | /* Configuration : Open System Shared Key Any Type | 802.1x Auth */ |
| 534 | /* Values (0x) : 01 02 03 | BIT2 */ |
| 535 | /* ------------------------------------------------------------------ */ |
| 536 | WID_AUTH_TYPE = 0x000D, |
| 537 | |
| 538 | /* Site Survey Type */ |
| 539 | /* -------------------------------------------------------------- */ |
| 540 | /* Configuration : Values to set */ |
| 541 | /* Survey 1 Channel : 0 */ |
| 542 | /* survey all Channels : 1 */ |
| 543 | /* Disable Site Survey : 2 */ |
| 544 | /* -------------------------------------------------------------- */ |
| 545 | WID_SITE_SURVEY = 0x000E, |
| 546 | |
| 547 | /* Listen Interval */ |
| 548 | /* -------------------------------------------------------------- */ |
| 549 | /* Configuration : Any value between 1 to 255 */ |
| 550 | /* Values to set : Same value. Default is 3 */ |
| 551 | /* -------------------------------------------------------------- */ |
| 552 | WID_LISTEN_INTERVAL = 0x000F, |
| 553 | |
| 554 | /* DTIM Period */ |
| 555 | /* -------------------------------------------------------------- */ |
| 556 | /* Configuration : Any value between 1 to 255 */ |
| 557 | /* Values to set : Same value. Default is 3 */ |
| 558 | /* -------------------------------------------------------------- */ |
| 559 | WID_DTIM_PERIOD = 0x0010, |
| 560 | |
| 561 | /* ACK Policy */ |
| 562 | /* -------------------------------------------------------------- */ |
| 563 | /* Configuration : Normal Ack No Ack */ |
| 564 | /* Values to set : 0 1 */ |
| 565 | /* -------------------------------------------------------------- */ |
| 566 | WID_ACK_POLICY = 0x0011, |
| 567 | |
| 568 | /* Reset MAC (Set only) */ |
| 569 | /* -------------------------------------------------------------- */ |
| 570 | /* Configuration : Don't Reset Reset No Request */ |
| 571 | /* Values to set : 0 1 2 */ |
| 572 | /* -------------------------------------------------------------- */ |
| 573 | WID_RESET = 0x0012, |
| 574 | |
| 575 | /* Broadcast SSID Option: Setting this will adhere to "" SSID element */ |
| 576 | /* ------------------------------------------------------------------ */ |
| 577 | /* Configuration : Enable Disable */ |
| 578 | /* Values to set : 1 0 */ |
| 579 | /* ------------------------------------------------------------------ */ |
| 580 | WID_BCAST_SSID = 0x0015, |
| 581 | |
| 582 | /* Disconnect (Station) */ |
| 583 | /* ------------------------------------------------------------------ */ |
| 584 | /* Configuration : Association ID */ |
| 585 | /* Values to set : Association ID */ |
| 586 | /* ------------------------------------------------------------------ */ |
| 587 | WID_DISCONNECT = 0x0016, |
| 588 | |
| 589 | /* 11a Tx Power Level */ |
| 590 | /* -------------------------------------------------------------------- */ |
| 591 | /* Configuration : Sets TX Power (Higher the value greater the power) */ |
| 592 | /* Values to set : Any value between 0 and 63 (inclusive; Default is 48)*/ |
| 593 | /* -------------------------------------------------------------------- */ |
| 594 | WID_TX_POWER_LEVEL_11A = 0x0018, |
| 595 | |
| 596 | /* Group Key Update Policy Selection */ |
| 597 | /* -------------------------------------------------------------------- */ |
| 598 | /* Configuration : Disabled timeBased packetBased timePacketBased */ |
| 599 | /* Values to set : 1 2 3 4 */ |
| 600 | /* -------------------------------------------------------------------- */ |
| 601 | WID_REKEY_POLICY = 0x0019, |
| 602 | |
| 603 | /* Allow Short Slot */ |
| 604 | /* -------------------------------------------------------------- */ |
| 605 | /* Configuration : Disallow Short Slot Allow Short Slot */ |
| 606 | /* (Enable Only Long Slot) (Enable Short Slot if applicable)*/ |
| 607 | /* Values to set : 0 1 */ |
| 608 | /* -------------------------------------------------------------- */ |
| 609 | WID_SHORT_SLOT_ALLOWED = 0x001A, |
| 610 | |
| 611 | WID_PHY_ACTIVE_REG = 0x001B, |
| 612 | |
| 613 | /* 11b Tx Power Level */ |
| 614 | /* -------------------------------------------------------------------- */ |
| 615 | /* Configuration : Sets TX Power (Higher the value greater the power) */ |
| 616 | /* Values to set : Any value between 0 and 63 (inclusive; Default is 48)*/ |
| 617 | /* -------------------------------------------------------------------- */ |
| 618 | WID_TX_POWER_LEVEL_11B = 0x001D, |
| 619 | |
| 620 | /* Scan Request */ |
| 621 | /* -------------------------------------------------------------------- */ |
| 622 | /* Configuration : Request default scan */ |
| 623 | /* Values to set : 0 */ |
| 624 | /* -------------------------------------------------------------------- */ |
| 625 | WID_START_SCAN_REQ = 0x001E, |
| 626 | |
| 627 | /* Rssi (get only) */ |
| 628 | /* -------------------------------------------------------------------- */ |
| 629 | /* Configuration : */ |
| 630 | /* Values to get : Rssi value */ |
| 631 | /* -------------------------------------------------------------------- */ |
| 632 | WID_RSSI = 0x001F, |
| 633 | |
| 634 | /* Join Request */ |
| 635 | /* -------------------------------------------------------------------- */ |
| 636 | /* Configuration : Request to join */ |
| 637 | /* Values to set : index of scan result */ |
| 638 | /* -------------------------------------------------------------------- */ |
| 639 | WID_JOIN_REQ = 0x0020, |
| 640 | |
| 641 | WID_LINKSPEED = 0x0026, |
| 642 | |
| 643 | /* Enable User Control of TX Power */ |
| 644 | /* -------------------------------------------------------------------- */ |
| 645 | /* Configuration : Disable Enable */ |
| 646 | /* Values to set : 0 1 */ |
| 647 | /* -------------------------------------------------------------------- */ |
| 648 | WID_USER_CONTROL_ON_TX_POWER = 0x0027, |
| 649 | |
| 650 | WID_MEMORY_ACCESS_8BIT = 0x0029, |
| 651 | |
| 652 | /* Enable Auto RX Sensitivity feature */ |
| 653 | /* -------------------------------------------------------------------- */ |
| 654 | /* Configuration : Disable Enable */ |
| 655 | /* Values to set : 0 1 */ |
| 656 | /* -------------------------------------------------------------------- */ |
| 657 | WID_AUTO_RX_SENSITIVITY = 0x0032, |
| 658 | |
| 659 | /* Receive Buffer Based Ack */ |
| 660 | /* -------------------------------------------------------------------- */ |
| 661 | /* Configuration : Disable Enable */ |
| 662 | /* Values to set : 0 1 */ |
| 663 | /* -------------------------------------------------------------------- */ |
| 664 | WID_DATAFLOW_CONTROL = 0x0033, |
| 665 | |
| 666 | /* Scan Filter */ |
| 667 | /* -------------------------------------------------------------------- */ |
| 668 | /* Configuration : Class No filter AP only Station Only */ |
| 669 | /* Values to set : 0 1 2 */ |
| 670 | /* Configuration : Priority High Rssi Low Rssi Detect */ |
| 671 | /* Values to set : 0 0x4 0x08 */ |
| 672 | /* Configuration : Channel filter off filter on */ |
| 673 | /* Values to set : 0 0x10 */ |
| 674 | /* -------------------------------------------------------------------- */ |
| 675 | WID_SCAN_FILTER = 0x0036, |
| 676 | |
| 677 | /* Link Loss Threshold (measure in the beacon period) */ |
| 678 | /* -------------------------------------------------------------------- */ |
| 679 | /* Configuration : Any value between 10 and 254 (Set to 255 to disable it) */ |
| 680 | /* Values to set : Same value. Default is 10 */ |
| 681 | /* -------------------------------------------------------------------- */ |
| 682 | WID_LINK_LOSS_THRESHOLD = 0x0037, |
| 683 | |
| 684 | /*BugID_4978*/ |
| 685 | WID_ABORT_RUNNING_SCAN = 0x003E, |
| 686 | |
| 687 | /* NMAC Character WID list */ |
| 688 | WID_WPS_START = 0x0043, |
| 689 | |
| 690 | /* Protection mode for MAC */ |
| 691 | /* -------------------------------------------------------------- */ |
| 692 | /* Configuration : Auto No protection ERP HT GF */ |
| 693 | /* Values to set : 0 1 2 3 4 */ |
| 694 | /* -------------------------------------------------------------- */ |
| 695 | WID_11N_PROT_MECH = 0x0080, |
| 696 | |
| 697 | /* ERP Protection type for MAC */ |
| 698 | /* -------------------------------------------------------------- */ |
| 699 | /* Configuration : Self-CTS RTS-CTS */ |
| 700 | /* Values to set : 0 1 */ |
| 701 | /* -------------------------------------------------------------- */ |
| 702 | WID_11N_ERP_PROT_TYPE = 0x0081, |
| 703 | |
| 704 | /* HT Option Enable */ |
| 705 | /* -------------------------------------------------------------- */ |
| 706 | /* Configuration : HT Enable HT Disable */ |
| 707 | /* Values to set : 1 0 */ |
| 708 | /* -------------------------------------------------------------- */ |
| 709 | WID_11N_ENABLE = 0x0082, |
| 710 | |
| 711 | /* 11n Operating mode (Note that 11g operating mode will also be */ |
| 712 | /* used in addition to this, if this is set to HT Mixed mode) */ |
| 713 | /* -------------------------------------------------------------- */ |
| 714 | /* Configuration : HT Mixed HT Only-20MHz HT Only-20/40MHz */ |
| 715 | /* Values to set : 1 2 3 */ |
| 716 | /* -------------------------------------------------------------- */ |
| 717 | WID_11N_OPERATING_MODE = 0x0083, |
| 718 | |
| 719 | /* 11n OBSS non-HT STA Detection flag */ |
| 720 | /* -------------------------------------------------------------- */ |
| 721 | /* Configuration : Do not detect */ |
| 722 | /* Values to set : 0 */ |
| 723 | /* Configuration : Detect, do not protect or report */ |
| 724 | /* Values to set : 1 */ |
| 725 | /* Configuration : Detect, protect and do not report */ |
| 726 | /* Values to set : 2 */ |
| 727 | /* Configuration : Detect, protect and report to other BSS */ |
| 728 | /* Values to set : 3 */ |
| 729 | /* -------------------------------------------------------------- */ |
| 730 | WID_11N_OBSS_NONHT_DETECTION = 0x0084, |
| 731 | |
| 732 | /* 11n HT Protection Type */ |
| 733 | /* -------------------------------------------------------------- */ |
| 734 | /* Configuration : RTS-CTS First Frame Exchange at non-HT-rate */ |
| 735 | /* Values to set : 0 1 */ |
| 736 | /* Configuration : LSIG TXOP First Frame Exchange in Mixed Fmt */ |
| 737 | /* Values to set : 2 3 */ |
| 738 | /* -------------------------------------------------------------- */ |
| 739 | WID_11N_HT_PROT_TYPE = 0x0085, |
| 740 | |
| 741 | /* 11n RIFS Protection Enable Flag */ |
| 742 | /* -------------------------------------------------------------- */ |
| 743 | /* Configuration : Disable Enable */ |
| 744 | /* Values to set : 0 1 */ |
| 745 | /* -------------------------------------------------------------- */ |
| 746 | WID_11N_RIFS_PROT_ENABLE = 0x0086, |
| 747 | |
| 748 | /* SMPS Mode */ |
| 749 | /* -------------------------------------------------------------- */ |
| 750 | /* Configuration : Static Dynamic MIMO (Power Save Disabled) */ |
| 751 | /* Values to set : 1 2 3 */ |
| 752 | /* -------------------------------------------------------------- */ |
| 753 | WID_11N_SMPS_MODE = 0x0087, |
| 754 | |
| 755 | /* Current transmit MCS */ |
| 756 | /* -------------------------------------------------------------- */ |
| 757 | /* Configuration : MCS Index for data rate */ |
| 758 | /* Values to set : 0 to 7 */ |
| 759 | /* -------------------------------------------------------------- */ |
| 760 | WID_11N_CURRENT_TX_MCS = 0x0088, |
| 761 | |
| 762 | WID_11N_PRINT_STATS = 0x0089, |
| 763 | |
| 764 | /* 11n Short GI Enable Flag */ |
| 765 | /* -------------------------------------------------------------- */ |
| 766 | /* Configuration : Disable Enable */ |
| 767 | /* Values to set : 0 1 */ |
| 768 | /* -------------------------------------------------------------- */ |
| 769 | WID_11N_SHORT_GI_ENABLE = 0x008D, |
| 770 | |
| 771 | /* 11n RIFS Enable Flag */ |
| 772 | /* -------------------------------------------------------------- */ |
| 773 | /* Configuration : Disable Enable */ |
| 774 | /* Values to set : 0 1 */ |
| 775 | /* -------------------------------------------------------------- */ |
| 776 | WID_RIFS_MODE = 0x0094, |
| 777 | |
| 778 | /* TX Abort Feature */ |
| 779 | /* -------------------------------------------------------------- */ |
| 780 | /* Configuration : Disable Self CTS Enable Self CTS */ |
| 781 | /* Values to set : 0 1 */ |
| 782 | /* Configuration : Disable TX Abort Enable TX Abort */ |
| 783 | /* Values to set : 2 3 */ |
| 784 | /* Configuration : Enable HW TX Abort Enable SW TX Abort */ |
| 785 | /* Values to set : 4 5 */ |
| 786 | /* -------------------------------------------------------------- */ |
| 787 | WID_TX_ABORT_CONFIG = 0x00A1, |
| 788 | |
| 789 | WID_REG_TSSI_11B_VALUE = 0x00A6, |
| 790 | WID_REG_TSSI_11G_VALUE = 0x00A7, |
| 791 | WID_REG_TSSI_11N_VALUE = 0x00A8, |
| 792 | WID_TX_CALIBRATION = 0x00A9, |
| 793 | WID_DSCR_TSSI_11B_VALUE = 0x00AA, |
| 794 | WID_DSCR_TSSI_11G_VALUE = 0x00AB, |
| 795 | WID_DSCR_TSSI_11N_VALUE = 0x00AC, |
| 796 | |
| 797 | /* Immediate Block-Ack Support */ |
| 798 | /* -------------------------------------------------------------- */ |
| 799 | /* Configuration : Disable Enable */ |
| 800 | /* Values to set : 0 1 */ |
| 801 | /* -------------------------------------------------------------- */ |
| 802 | WID_11N_IMMEDIATE_BA_ENABLED = 0x00AF, |
| 803 | |
| 804 | /* TXOP Disable Flag */ |
| 805 | /* -------------------------------------------------------------- */ |
| 806 | /* Configuration : Disable Enable */ |
| 807 | /* Values to set : 1 0 */ |
| 808 | /* -------------------------------------------------------------- */ |
| 809 | WID_11N_TXOP_PROT_DISABLE = 0x00B0, |
| 810 | |
| 811 | |
| 812 | WID_TX_POWER_LEVEL_11N = 0x00B1, |
| 813 | |
| 814 | /* Custom Character WID list */ |
| 815 | WID_PC_TEST_MODE = 0x00C8, |
| 816 | /*bug3819: */ |
| 817 | /* SCAN Complete notification WID*/ |
| 818 | WID_SCAN_COMPLETE = 0x00C9, |
| 819 | |
| 820 | #ifdef WILC_AP_EXTERNAL_MLME |
| 821 | WID_DEL_BEACON = 0x00CA, |
| 822 | #endif |
| 823 | |
| 824 | WID_LOGTerminal_Switch = 0x00CD, |
| 825 | /* EMAC Short WID list */ |
| 826 | /* RTS Threshold */ |
| 827 | /* -------------------------------------------------------------- */ |
| 828 | /* Configuration : Any value between 256 to 2347 */ |
| 829 | /* Values to set : Same value. Default is 2347 */ |
| 830 | /* -------------------------------------------------------------- */ |
| 831 | WID_RTS_THRESHOLD = 0x1000, |
| 832 | |
| 833 | /* Fragmentation Threshold */ |
| 834 | /* -------------------------------------------------------------- */ |
| 835 | /* Configuration : Any value between 256 to 2346 */ |
| 836 | /* Values to set : Same value. Default is 2346 */ |
| 837 | /* -------------------------------------------------------------- */ |
| 838 | WID_FRAG_THRESHOLD = 0x1001, |
| 839 | |
| 840 | WID_SHORT_RETRY_LIMIT = 0x1002, |
| 841 | WID_LONG_RETRY_LIMIT = 0x1003, |
| 842 | WID_BEACON_INTERVAL = 0x1006, |
| 843 | WID_MEMORY_ACCESS_16BIT = 0x1008, |
| 844 | WID_RX_SENSE = 0x100B, |
| 845 | WID_ACTIVE_SCAN_TIME = 0x100C, |
| 846 | WID_PASSIVE_SCAN_TIME = 0x100D, |
| 847 | |
| 848 | WID_SITE_SURVEY_SCAN_TIME = 0x100E, |
| 849 | WID_JOIN_START_TIMEOUT = 0x100F, |
| 850 | WID_AUTH_TIMEOUT = 0x1010, |
| 851 | WID_ASOC_TIMEOUT = 0x1011, |
| 852 | WID_11I_PROTOCOL_TIMEOUT = 0x1012, |
| 853 | WID_EAPOL_RESPONSE_TIMEOUT = 0x1013, |
| 854 | |
| 855 | /* NMAC Short WID list */ |
| 856 | WID_11N_SIG_QUAL_VAL = 0x1085, |
| 857 | WID_CCA_THRESHOLD = 0x1087, |
| 858 | |
| 859 | /* Custom Short WID list */ |
| 860 | |
| 861 | /* EMAC Integer WID list */ |
| 862 | WID_FAILED_COUNT = 0x2000, |
| 863 | WID_RETRY_COUNT = 0x2001, |
| 864 | WID_MULTIPLE_RETRY_COUNT = 0x2002, |
| 865 | WID_FRAME_DUPLICATE_COUNT = 0x2003, |
| 866 | WID_ACK_FAILURE_COUNT = 0x2004, |
| 867 | WID_RECEIVED_FRAGMENT_COUNT = 0x2005, |
| 868 | WID_MCAST_RECEIVED_FRAME_COUNT = 0x2006, |
| 869 | WID_FCS_ERROR_COUNT = 0x2007, |
| 870 | WID_SUCCESS_FRAME_COUNT = 0x2008, |
| 871 | WID_HUT_TX_COUNT = 0x200A, |
| 872 | WID_TX_FRAGMENT_COUNT = 0x200B, |
| 873 | WID_TX_MULTICAST_FRAME_COUNT = 0x200C, |
| 874 | WID_RTS_SUCCESS_COUNT = 0x200D, |
| 875 | WID_RTS_FAILURE_COUNT = 0x200E, |
| 876 | WID_WEP_UNDECRYPTABLE_COUNT = 0x200F, |
| 877 | WID_REKEY_PERIOD = 0x2010, |
| 878 | WID_REKEY_PACKET_COUNT = 0x2011, |
| 879 | WID_1X_SERV_ADDR = 0x2012, |
| 880 | WID_STACK_IP_ADDR = 0x2013, |
| 881 | WID_STACK_NETMASK_ADDR = 0x2014, |
| 882 | WID_HW_RX_COUNT = 0x2015, |
| 883 | WID_MEMORY_ADDRESS = 0x201E, |
| 884 | WID_MEMORY_ACCESS_32BIT = 0x201F, |
| 885 | WID_RF_REG_VAL = 0x2021, |
| 886 | |
| 887 | |
| 888 | /* NMAC Integer WID list */ |
| 889 | WID_11N_PHY_ACTIVE_REG_VAL = 0x2080, |
| 890 | |
| 891 | /* Custom Integer WID list */ |
| 892 | WID_GET_INACTIVE_TIME = 0x2084, |
| 893 | WID_SET_DRV_HANDLER = 0X2085, |
| 894 | WID_SET_OPERATION_MODE = 0X2086, |
| 895 | /* EMAC String WID list */ |
| 896 | WID_SSID = 0x3000, |
| 897 | WID_FIRMWARE_VERSION = 0x3001, |
| 898 | WID_OPERATIONAL_RATE_SET = 0x3002, |
| 899 | WID_BSSID = 0x3003, |
| 900 | WID_WEP_KEY_VALUE = 0x3004, |
| 901 | WID_11I_PSK = 0x3008, |
| 902 | WID_11E_P_ACTION_REQ = 0x3009, |
| 903 | WID_1X_KEY = 0x300A, |
| 904 | WID_HARDWARE_VERSION = 0x300B, |
| 905 | WID_MAC_ADDR = 0x300C, |
| 906 | WID_HUT_DEST_ADDR = 0x300D, |
| 907 | WID_PHY_VERSION = 0x300F, |
| 908 | WID_SUPP_USERNAME = 0x3010, |
| 909 | WID_SUPP_PASSWORD = 0x3011, |
| 910 | WID_SITE_SURVEY_RESULTS = 0x3012, |
| 911 | WID_RX_POWER_LEVEL = 0x3013, |
| 912 | WID_DEL_ALL_RX_BA = 0x3014, |
| 913 | WID_SET_STA_MAC_INACTIVE_TIME = 0x3017, |
| 914 | WID_ADD_WEP_KEY = 0x3019, |
| 915 | WID_REMOVE_WEP_KEY = 0x301A, |
| 916 | WID_ADD_PTK = 0x301B, |
| 917 | WID_ADD_RX_GTK = 0x301C, |
| 918 | WID_ADD_TX_GTK = 0x301D, |
| 919 | WID_REMOVE_KEY = 0x301E, |
| 920 | WID_ASSOC_REQ_INFO = 0x301F, |
| 921 | WID_ASSOC_RES_INFO = 0x3020, |
| 922 | WID_MANUFACTURER = 0x3026, /*Added for CAPI tool */ |
| 923 | WID_MODEL_NAME = 0x3027, /*Added for CAPI tool */ |
| 924 | WID_MODEL_NUM = 0x3028, /*Added for CAPI tool */ |
| 925 | WID_DEVICE_NAME = 0x3029, /*Added for CAPI tool */ |
| 926 | |
| 927 | /* NMAC String WID list */ |
| 928 | WID_11N_P_ACTION_REQ = 0x3080, |
| 929 | WID_HUT_TEST_ID = 0x3081, |
| 930 | WID_PMKID_INFO = 0x3082, |
| 931 | WID_FIRMWARE_INFO = 0x3083, |
| 932 | #ifdef WILC_P2P |
| 933 | WID_REGISTER_FRAME = 0x3084, |
| 934 | #endif |
| 935 | WID_DEL_ALL_STA = 0x3085, |
| 936 | #ifdef WILC_P2P |
| 937 | WID_REMAIN_ON_CHAN = 0x3996, |
| 938 | #endif |
| 939 | /*BugID_4156*/ |
| 940 | WID_SSID_PROBE_REQ = 0x3997, |
| 941 | /*BugID_4124 WID to trigger modified Join Request using SSID and BSSID instead of bssListIdx (used by WID_JOIN_REQ)*/ |
| 942 | WID_JOIN_REQ_EXTENDED = 0x3998, |
| 943 | |
| 944 | /* BugID 4951: WID toset IP address in firmware */ |
| 945 | WID_IP_ADDRESS = 0x3999, |
| 946 | |
| 947 | |
| 948 | |
| 949 | /* Custom String WID list */ |
| 950 | |
| 951 | /* EMAC Binary WID list */ |
| 952 | WID_UAPSD_CONFIG = 0x4001, |
| 953 | WID_UAPSD_STATUS = 0x4002, |
| 954 | WID_WMM_AP_AC_PARAMS = 0x4003, |
| 955 | WID_WMM_STA_AC_PARAMS = 0x4004, |
| 956 | WID_NETWORK_INFO = 0x4005, |
| 957 | WID_STA_JOIN_INFO = 0x4006, |
| 958 | WID_CONNECTED_STA_LIST = 0x4007, |
| 959 | |
| 960 | /* NMAC Binary WID list */ |
| 961 | WID_11N_AUTORATE_TABLE = 0x4080, |
| 962 | |
| 963 | |
| 964 | /*Added here by Amr - BugID 4134*/ |
| 965 | WID_SCAN_CHANNEL_LIST = 0x4084, |
| 966 | |
| 967 | /*BugID_3746 WID to add IE to be added in next probe request*/ |
| 968 | WID_INFO_ELEMENT_PROBE = 0x4085, |
| 969 | /*BugID_3746 WID to add IE to be added in next associate request*/ |
| 970 | WID_INFO_ELEMENT_ASSOCIATE = 0x4086, |
| 971 | WID_ADD_STA = 0X4087, |
| 972 | WID_REMOVE_STA = 0X4088, |
| 973 | WID_EDIT_STA = 0X4089, |
| 974 | WID_ADD_BEACON = 0x408a, |
| 975 | |
| 976 | /* BugID 5108 */ |
| 977 | WID_SETUP_MULTICAST_FILTER = 0x408b, |
| 978 | |
| 979 | /* Miscellaneous WIDs */ |
| 980 | WID_ALL = 0x7FFE, |
| 981 | WID_MAX = 0xFFFF |
| 982 | } WID_T; |
| 983 | |
| 984 | int wilc_wlan_init(wilc_wlan_inp_t *inp, wilc_wlan_oup_t *oup); |
| 985 | |
| 986 | void wilc_bus_set_max_speed(void); |
| 987 | void wilc_bus_set_default_speed(void); |
| 988 | uint32_t wilc_get_chipid(uint8_t update); |
| 989 | |
| 990 | |
| 991 | #endif |