blob: e4c59fdc0e12bcc7e5d1e49231d211b5d3c67b7c [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 *
3 * Driver for Bluetooth PCMCIA cards with HCI UART interface
4 *
5 * Copyright (C) 2001-2002 Marcel Holtmann <marcel@holtmann.org>
6 *
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation;
11 *
12 * Software distributed under the License is distributed on an "AS
13 * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
14 * implied. See the License for the specific language governing
15 * rights and limitations under the License.
16 *
17 * The initial developer of the original code is David A. Hinds
18 * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
19 * are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
20 *
21 */
22
23#include <linux/config.h>
24#include <linux/module.h>
25
26#include <linux/kernel.h>
27#include <linux/init.h>
28#include <linux/slab.h>
29#include <linux/types.h>
30#include <linux/sched.h>
31#include <linux/delay.h>
32#include <linux/errno.h>
33#include <linux/ptrace.h>
34#include <linux/ioport.h>
35#include <linux/spinlock.h>
36#include <linux/moduleparam.h>
37
38#include <linux/skbuff.h>
39#include <linux/string.h>
40#include <linux/serial.h>
41#include <linux/serial_reg.h>
42#include <linux/bitops.h>
43#include <asm/system.h>
44#include <asm/io.h>
45
Linus Torvalds1da177e2005-04-16 15:20:36 -070046#include <pcmcia/cs_types.h>
47#include <pcmcia/cs.h>
48#include <pcmcia/cistpl.h>
49#include <pcmcia/ciscode.h>
50#include <pcmcia/ds.h>
51#include <pcmcia/cisreg.h>
52
53#include <net/bluetooth/bluetooth.h>
54#include <net/bluetooth/hci_core.h>
55
56
57
58/* ======================== Module parameters ======================== */
59
60
61MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
62MODULE_DESCRIPTION("Bluetooth driver for Bluetooth PCMCIA cards with HCI UART interface");
63MODULE_LICENSE("GPL");
64
65
66
67/* ======================== Local structures ======================== */
68
69
70typedef struct btuart_info_t {
71 dev_link_t link;
72 dev_node_t node;
73
74 struct hci_dev *hdev;
75
76 spinlock_t lock; /* For serializing operations */
77
78 struct sk_buff_head txq;
79 unsigned long tx_state;
80
81 unsigned long rx_state;
82 unsigned long rx_count;
83 struct sk_buff *rx_skb;
84} btuart_info_t;
85
86
87static void btuart_config(dev_link_t *link);
88static void btuart_release(dev_link_t *link);
89static int btuart_event(event_t event, int priority, event_callback_args_t *args);
90
91static dev_info_t dev_info = "btuart_cs";
92
93static dev_link_t *btuart_attach(void);
94static void btuart_detach(dev_link_t *);
95
96static dev_link_t *dev_list = NULL;
97
98
99/* Maximum baud rate */
100#define SPEED_MAX 115200
101
102/* Default baud rate: 57600, 115200, 230400 or 460800 */
103#define DEFAULT_BAUD_RATE 115200
104
105
106/* Transmit states */
107#define XMIT_SENDING 1
108#define XMIT_WAKEUP 2
109#define XMIT_WAITING 8
110
111/* Receiver states */
112#define RECV_WAIT_PACKET_TYPE 0
113#define RECV_WAIT_EVENT_HEADER 1
114#define RECV_WAIT_ACL_HEADER 2
115#define RECV_WAIT_SCO_HEADER 3
116#define RECV_WAIT_DATA 4
117
118
119
120/* ======================== Interrupt handling ======================== */
121
122
123static int btuart_write(unsigned int iobase, int fifo_size, __u8 *buf, int len)
124{
125 int actual = 0;
126
127 /* Tx FIFO should be empty */
128 if (!(inb(iobase + UART_LSR) & UART_LSR_THRE))
129 return 0;
130
131 /* Fill FIFO with current frame */
132 while ((fifo_size-- > 0) && (actual < len)) {
133 /* Transmit next byte */
134 outb(buf[actual], iobase + UART_TX);
135 actual++;
136 }
137
138 return actual;
139}
140
141
142static void btuart_write_wakeup(btuart_info_t *info)
143{
144 if (!info) {
145 BT_ERR("Unknown device");
146 return;
147 }
148
149 if (test_and_set_bit(XMIT_SENDING, &(info->tx_state))) {
150 set_bit(XMIT_WAKEUP, &(info->tx_state));
151 return;
152 }
153
154 do {
155 register unsigned int iobase = info->link.io.BasePort1;
156 register struct sk_buff *skb;
157 register int len;
158
159 clear_bit(XMIT_WAKEUP, &(info->tx_state));
160
161 if (!(info->link.state & DEV_PRESENT))
162 return;
163
164 if (!(skb = skb_dequeue(&(info->txq))))
165 break;
166
167 /* Send frame */
168 len = btuart_write(iobase, 16, skb->data, skb->len);
169 set_bit(XMIT_WAKEUP, &(info->tx_state));
170
171 if (len == skb->len) {
172 kfree_skb(skb);
173 } else {
174 skb_pull(skb, len);
175 skb_queue_head(&(info->txq), skb);
176 }
177
178 info->hdev->stat.byte_tx += len;
179
180 } while (test_bit(XMIT_WAKEUP, &(info->tx_state)));
181
182 clear_bit(XMIT_SENDING, &(info->tx_state));
183}
184
185
186static void btuart_receive(btuart_info_t *info)
187{
188 unsigned int iobase;
189 int boguscount = 0;
190
191 if (!info) {
192 BT_ERR("Unknown device");
193 return;
194 }
195
196 iobase = info->link.io.BasePort1;
197
198 do {
199 info->hdev->stat.byte_rx++;
200
201 /* Allocate packet */
202 if (info->rx_skb == NULL) {
203 info->rx_state = RECV_WAIT_PACKET_TYPE;
204 info->rx_count = 0;
205 if (!(info->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC))) {
206 BT_ERR("Can't allocate mem for new packet");
207 return;
208 }
209 }
210
211 if (info->rx_state == RECV_WAIT_PACKET_TYPE) {
212
213 info->rx_skb->dev = (void *) info->hdev;
214 info->rx_skb->pkt_type = inb(iobase + UART_RX);
215
216 switch (info->rx_skb->pkt_type) {
217
218 case HCI_EVENT_PKT:
219 info->rx_state = RECV_WAIT_EVENT_HEADER;
220 info->rx_count = HCI_EVENT_HDR_SIZE;
221 break;
222
223 case HCI_ACLDATA_PKT:
224 info->rx_state = RECV_WAIT_ACL_HEADER;
225 info->rx_count = HCI_ACL_HDR_SIZE;
226 break;
227
228 case HCI_SCODATA_PKT:
229 info->rx_state = RECV_WAIT_SCO_HEADER;
230 info->rx_count = HCI_SCO_HDR_SIZE;
231 break;
232
233 default:
234 /* Unknown packet */
235 BT_ERR("Unknown HCI packet with type 0x%02x received", info->rx_skb->pkt_type);
236 info->hdev->stat.err_rx++;
237 clear_bit(HCI_RUNNING, &(info->hdev->flags));
238
239 kfree_skb(info->rx_skb);
240 info->rx_skb = NULL;
241 break;
242
243 }
244
245 } else {
246
247 *skb_put(info->rx_skb, 1) = inb(iobase + UART_RX);
248 info->rx_count--;
249
250 if (info->rx_count == 0) {
251
252 int dlen;
253 struct hci_event_hdr *eh;
254 struct hci_acl_hdr *ah;
255 struct hci_sco_hdr *sh;
256
257
258 switch (info->rx_state) {
259
260 case RECV_WAIT_EVENT_HEADER:
261 eh = (struct hci_event_hdr *)(info->rx_skb->data);
262 info->rx_state = RECV_WAIT_DATA;
263 info->rx_count = eh->plen;
264 break;
265
266 case RECV_WAIT_ACL_HEADER:
267 ah = (struct hci_acl_hdr *)(info->rx_skb->data);
268 dlen = __le16_to_cpu(ah->dlen);
269 info->rx_state = RECV_WAIT_DATA;
270 info->rx_count = dlen;
271 break;
272
273 case RECV_WAIT_SCO_HEADER:
274 sh = (struct hci_sco_hdr *)(info->rx_skb->data);
275 info->rx_state = RECV_WAIT_DATA;
276 info->rx_count = sh->dlen;
277 break;
278
279 case RECV_WAIT_DATA:
280 hci_recv_frame(info->rx_skb);
281 info->rx_skb = NULL;
282 break;
283
284 }
285
286 }
287
288 }
289
290 /* Make sure we don't stay here too long */
291 if (boguscount++ > 16)
292 break;
293
294 } while (inb(iobase + UART_LSR) & UART_LSR_DR);
295}
296
297
298static irqreturn_t btuart_interrupt(int irq, void *dev_inst, struct pt_regs *regs)
299{
300 btuart_info_t *info = dev_inst;
301 unsigned int iobase;
302 int boguscount = 0;
303 int iir, lsr;
304
305 if (!info || !info->hdev) {
306 BT_ERR("Call of irq %d for unknown device", irq);
307 return IRQ_NONE;
308 }
309
310 iobase = info->link.io.BasePort1;
311
312 spin_lock(&(info->lock));
313
314 iir = inb(iobase + UART_IIR) & UART_IIR_ID;
315 while (iir) {
316
317 /* Clear interrupt */
318 lsr = inb(iobase + UART_LSR);
319
320 switch (iir) {
321 case UART_IIR_RLSI:
322 BT_ERR("RLSI");
323 break;
324 case UART_IIR_RDI:
325 /* Receive interrupt */
326 btuart_receive(info);
327 break;
328 case UART_IIR_THRI:
329 if (lsr & UART_LSR_THRE) {
330 /* Transmitter ready for data */
331 btuart_write_wakeup(info);
332 }
333 break;
334 default:
335 BT_ERR("Unhandled IIR=%#x", iir);
336 break;
337 }
338
339 /* Make sure we don't stay here too long */
340 if (boguscount++ > 100)
341 break;
342
343 iir = inb(iobase + UART_IIR) & UART_IIR_ID;
344
345 }
346
347 spin_unlock(&(info->lock));
348
349 return IRQ_HANDLED;
350}
351
352
353static void btuart_change_speed(btuart_info_t *info, unsigned int speed)
354{
355 unsigned long flags;
356 unsigned int iobase;
357 int fcr; /* FIFO control reg */
358 int lcr; /* Line control reg */
359 int divisor;
360
361 if (!info) {
362 BT_ERR("Unknown device");
363 return;
364 }
365
366 iobase = info->link.io.BasePort1;
367
368 spin_lock_irqsave(&(info->lock), flags);
369
370 /* Turn off interrupts */
371 outb(0, iobase + UART_IER);
372
373 divisor = SPEED_MAX / speed;
374
375 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT;
376
377 /*
378 * Use trigger level 1 to avoid 3 ms. timeout delay at 9600 bps, and
379 * almost 1,7 ms at 19200 bps. At speeds above that we can just forget
380 * about this timeout since it will always be fast enough.
381 */
382
383 if (speed < 38400)
384 fcr |= UART_FCR_TRIGGER_1;
385 else
386 fcr |= UART_FCR_TRIGGER_14;
387
388 /* Bluetooth cards use 8N1 */
389 lcr = UART_LCR_WLEN8;
390
391 outb(UART_LCR_DLAB | lcr, iobase + UART_LCR); /* Set DLAB */
392 outb(divisor & 0xff, iobase + UART_DLL); /* Set speed */
393 outb(divisor >> 8, iobase + UART_DLM);
394 outb(lcr, iobase + UART_LCR); /* Set 8N1 */
395 outb(fcr, iobase + UART_FCR); /* Enable FIFO's */
396
397 /* Turn on interrups */
398 outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER);
399
400 spin_unlock_irqrestore(&(info->lock), flags);
401}
402
403
404
405/* ======================== HCI interface ======================== */
406
407
408static int btuart_hci_flush(struct hci_dev *hdev)
409{
410 btuart_info_t *info = (btuart_info_t *)(hdev->driver_data);
411
412 /* Drop TX queue */
413 skb_queue_purge(&(info->txq));
414
415 return 0;
416}
417
418
419static int btuart_hci_open(struct hci_dev *hdev)
420{
421 set_bit(HCI_RUNNING, &(hdev->flags));
422
423 return 0;
424}
425
426
427static int btuart_hci_close(struct hci_dev *hdev)
428{
429 if (!test_and_clear_bit(HCI_RUNNING, &(hdev->flags)))
430 return 0;
431
432 btuart_hci_flush(hdev);
433
434 return 0;
435}
436
437
438static int btuart_hci_send_frame(struct sk_buff *skb)
439{
440 btuart_info_t *info;
441 struct hci_dev *hdev = (struct hci_dev *)(skb->dev);
442
443 if (!hdev) {
444 BT_ERR("Frame for unknown HCI device (hdev=NULL)");
445 return -ENODEV;
446 }
447
448 info = (btuart_info_t *)(hdev->driver_data);
449
450 switch (skb->pkt_type) {
451 case HCI_COMMAND_PKT:
452 hdev->stat.cmd_tx++;
453 break;
454 case HCI_ACLDATA_PKT:
455 hdev->stat.acl_tx++;
456 break;
457 case HCI_SCODATA_PKT:
458 hdev->stat.sco_tx++;
459 break;
460 };
461
462 /* Prepend skb with frame type */
463 memcpy(skb_push(skb, 1), &(skb->pkt_type), 1);
464 skb_queue_tail(&(info->txq), skb);
465
466 btuart_write_wakeup(info);
467
468 return 0;
469}
470
471
472static void btuart_hci_destruct(struct hci_dev *hdev)
473{
474}
475
476
477static int btuart_hci_ioctl(struct hci_dev *hdev, unsigned int cmd, unsigned long arg)
478{
479 return -ENOIOCTLCMD;
480}
481
482
483
484/* ======================== Card services HCI interaction ======================== */
485
486
487static int btuart_open(btuart_info_t *info)
488{
489 unsigned long flags;
490 unsigned int iobase = info->link.io.BasePort1;
491 struct hci_dev *hdev;
492
493 spin_lock_init(&(info->lock));
494
495 skb_queue_head_init(&(info->txq));
496
497 info->rx_state = RECV_WAIT_PACKET_TYPE;
498 info->rx_count = 0;
499 info->rx_skb = NULL;
500
501 /* Initialize HCI device */
502 hdev = hci_alloc_dev();
503 if (!hdev) {
504 BT_ERR("Can't allocate HCI device");
505 return -ENOMEM;
506 }
507
508 info->hdev = hdev;
509
510 hdev->type = HCI_PCCARD;
511 hdev->driver_data = info;
512
513 hdev->open = btuart_hci_open;
514 hdev->close = btuart_hci_close;
515 hdev->flush = btuart_hci_flush;
516 hdev->send = btuart_hci_send_frame;
517 hdev->destruct = btuart_hci_destruct;
518 hdev->ioctl = btuart_hci_ioctl;
519
520 hdev->owner = THIS_MODULE;
521
522 spin_lock_irqsave(&(info->lock), flags);
523
524 /* Reset UART */
525 outb(0, iobase + UART_MCR);
526
527 /* Turn off interrupts */
528 outb(0, iobase + UART_IER);
529
530 /* Initialize UART */
531 outb(UART_LCR_WLEN8, iobase + UART_LCR); /* Reset DLAB */
532 outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase + UART_MCR);
533
534 /* Turn on interrupts */
535 // outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER);
536
537 spin_unlock_irqrestore(&(info->lock), flags);
538
539 btuart_change_speed(info, DEFAULT_BAUD_RATE);
540
541 /* Timeout before it is safe to send the first HCI packet */
542 msleep(1000);
543
544 /* Register HCI device */
545 if (hci_register_dev(hdev) < 0) {
546 BT_ERR("Can't register HCI device");
547 info->hdev = NULL;
548 hci_free_dev(hdev);
549 return -ENODEV;
550 }
551
552 return 0;
553}
554
555
556static int btuart_close(btuart_info_t *info)
557{
558 unsigned long flags;
559 unsigned int iobase = info->link.io.BasePort1;
560 struct hci_dev *hdev = info->hdev;
561
562 if (!hdev)
563 return -ENODEV;
564
565 btuart_hci_close(hdev);
566
567 spin_lock_irqsave(&(info->lock), flags);
568
569 /* Reset UART */
570 outb(0, iobase + UART_MCR);
571
572 /* Turn off interrupts */
573 outb(0, iobase + UART_IER);
574
575 spin_unlock_irqrestore(&(info->lock), flags);
576
577 if (hci_unregister_dev(hdev) < 0)
578 BT_ERR("Can't unregister HCI device %s", hdev->name);
579
580 hci_free_dev(hdev);
581
582 return 0;
583}
584
585static dev_link_t *btuart_attach(void)
586{
587 btuart_info_t *info;
588 client_reg_t client_reg;
589 dev_link_t *link;
590 int ret;
591
592 /* Create new info device */
593 info = kmalloc(sizeof(*info), GFP_KERNEL);
594 if (!info)
595 return NULL;
596 memset(info, 0, sizeof(*info));
597
598 link = &info->link;
599 link->priv = info;
600
601 link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
602 link->io.NumPorts1 = 8;
603 link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
604 link->irq.IRQInfo1 = IRQ_LEVEL_ID;
605
606 link->irq.Handler = btuart_interrupt;
607 link->irq.Instance = info;
608
609 link->conf.Attributes = CONF_ENABLE_IRQ;
610 link->conf.Vcc = 50;
611 link->conf.IntType = INT_MEMORY_AND_IO;
612
613 /* Register with Card Services */
614 link->next = dev_list;
615 dev_list = link;
616 client_reg.dev_info = &dev_info;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700617 client_reg.Version = 0x0210;
618 client_reg.event_callback_args.client_data = link;
619
620 ret = pcmcia_register_client(&link->handle, &client_reg);
621 if (ret != CS_SUCCESS) {
622 cs_error(link->handle, RegisterClient, ret);
623 btuart_detach(link);
624 return NULL;
625 }
626
627 return link;
628}
629
630
631static void btuart_detach(dev_link_t *link)
632{
633 btuart_info_t *info = link->priv;
634 dev_link_t **linkp;
635 int ret;
636
637 /* Locate device structure */
638 for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
639 if (*linkp == link)
640 break;
641
642 if (*linkp == NULL)
643 return;
644
645 if (link->state & DEV_CONFIG)
646 btuart_release(link);
647
648 if (link->handle) {
649 ret = pcmcia_deregister_client(link->handle);
650 if (ret != CS_SUCCESS)
651 cs_error(link->handle, DeregisterClient, ret);
652 }
653
654 /* Unlink device structure, free bits */
655 *linkp = link->next;
656
657 kfree(info);
658}
659
660static int get_tuple(client_handle_t handle, tuple_t *tuple, cisparse_t *parse)
661{
662 int i;
663
664 i = pcmcia_get_tuple_data(handle, tuple);
665 if (i != CS_SUCCESS)
666 return i;
667
668 return pcmcia_parse_tuple(handle, tuple, parse);
669}
670
671static int first_tuple(client_handle_t handle, tuple_t *tuple, cisparse_t *parse)
672{
673 if (pcmcia_get_first_tuple(handle, tuple) != CS_SUCCESS)
674 return CS_NO_MORE_ITEMS;
675 return get_tuple(handle, tuple, parse);
676}
677
678static int next_tuple(client_handle_t handle, tuple_t *tuple, cisparse_t *parse)
679{
680 if (pcmcia_get_next_tuple(handle, tuple) != CS_SUCCESS)
681 return CS_NO_MORE_ITEMS;
682 return get_tuple(handle, tuple, parse);
683}
684
685static void btuart_config(dev_link_t *link)
686{
687 static kio_addr_t base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
688 client_handle_t handle = link->handle;
689 btuart_info_t *info = link->priv;
690 tuple_t tuple;
691 u_short buf[256];
692 cisparse_t parse;
693 cistpl_cftable_entry_t *cf = &parse.cftable_entry;
694 config_info_t config;
695 int i, j, try, last_ret, last_fn;
696
697 tuple.TupleData = (cisdata_t *)buf;
698 tuple.TupleOffset = 0;
699 tuple.TupleDataMax = 255;
700 tuple.Attributes = 0;
701
702 /* Get configuration register information */
703 tuple.DesiredTuple = CISTPL_CONFIG;
704 last_ret = first_tuple(handle, &tuple, &parse);
705 if (last_ret != CS_SUCCESS) {
706 last_fn = ParseTuple;
707 goto cs_failed;
708 }
709 link->conf.ConfigBase = parse.config.base;
710 link->conf.Present = parse.config.rmask[0];
711
712 /* Configure card */
713 link->state |= DEV_CONFIG;
714 i = pcmcia_get_configuration_info(handle, &config);
715 link->conf.Vcc = config.Vcc;
716
717 /* First pass: look for a config entry that looks normal. */
718 tuple.TupleData = (cisdata_t *) buf;
719 tuple.TupleOffset = 0;
720 tuple.TupleDataMax = 255;
721 tuple.Attributes = 0;
722 tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
723 /* Two tries: without IO aliases, then with aliases */
724 for (try = 0; try < 2; try++) {
725 i = first_tuple(handle, &tuple, &parse);
726 while (i != CS_NO_MORE_ITEMS) {
727 if (i != CS_SUCCESS)
728 goto next_entry;
729 if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
730 link->conf.Vpp1 = link->conf.Vpp2 = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
731 if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) && (cf->io.win[0].base != 0)) {
732 link->conf.ConfigIndex = cf->index;
733 link->io.BasePort1 = cf->io.win[0].base;
734 link->io.IOAddrLines = (try == 0) ? 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
735 i = pcmcia_request_io(link->handle, &link->io);
736 if (i == CS_SUCCESS)
737 goto found_port;
738 }
739next_entry:
740 i = next_tuple(handle, &tuple, &parse);
741 }
742 }
743
744 /* Second pass: try to find an entry that isn't picky about
745 its base address, then try to grab any standard serial port
746 address, and finally try to get any free port. */
747 i = first_tuple(handle, &tuple, &parse);
748 while (i != CS_NO_MORE_ITEMS) {
749 if ((i == CS_SUCCESS) && (cf->io.nwin > 0)
750 && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
751 link->conf.ConfigIndex = cf->index;
752 for (j = 0; j < 5; j++) {
753 link->io.BasePort1 = base[j];
754 link->io.IOAddrLines = base[j] ? 16 : 3;
755 i = pcmcia_request_io(link->handle, &link->io);
756 if (i == CS_SUCCESS)
757 goto found_port;
758 }
759 }
760 i = next_tuple(handle, &tuple, &parse);
761 }
762
763found_port:
764 if (i != CS_SUCCESS) {
765 BT_ERR("No usable port range found");
766 cs_error(link->handle, RequestIO, i);
767 goto failed;
768 }
769
770 i = pcmcia_request_irq(link->handle, &link->irq);
771 if (i != CS_SUCCESS) {
772 cs_error(link->handle, RequestIRQ, i);
773 link->irq.AssignedIRQ = 0;
774 }
775
776 i = pcmcia_request_configuration(link->handle, &link->conf);
777 if (i != CS_SUCCESS) {
778 cs_error(link->handle, RequestConfiguration, i);
779 goto failed;
780 }
781
782 if (btuart_open(info) != 0)
783 goto failed;
784
785 strcpy(info->node.dev_name, info->hdev->name);
786 link->dev = &info->node;
787 link->state &= ~DEV_CONFIG_PENDING;
788
789 return;
790
791cs_failed:
792 cs_error(link->handle, last_fn, last_ret);
793
794failed:
795 btuart_release(link);
796}
797
798
799static void btuart_release(dev_link_t *link)
800{
801 btuart_info_t *info = link->priv;
802
803 if (link->state & DEV_PRESENT)
804 btuart_close(info);
805
806 link->dev = NULL;
807
808 pcmcia_release_configuration(link->handle);
809 pcmcia_release_io(link->handle, &link->io);
810 pcmcia_release_irq(link->handle, &link->irq);
811
812 link->state &= ~DEV_CONFIG;
813}
814
815
816static int btuart_event(event_t event, int priority, event_callback_args_t *args)
817{
818 dev_link_t *link = args->client_data;
819 btuart_info_t *info = link->priv;
820
821 switch (event) {
822 case CS_EVENT_CARD_REMOVAL:
823 link->state &= ~DEV_PRESENT;
824 if (link->state & DEV_CONFIG) {
825 btuart_close(info);
826 btuart_release(link);
827 }
828 break;
829 case CS_EVENT_CARD_INSERTION:
830 link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
831 btuart_config(link);
832 break;
833 case CS_EVENT_PM_SUSPEND:
834 link->state |= DEV_SUSPEND;
835 /* Fall through... */
836 case CS_EVENT_RESET_PHYSICAL:
837 if (link->state & DEV_CONFIG)
838 pcmcia_release_configuration(link->handle);
839 break;
840 case CS_EVENT_PM_RESUME:
841 link->state &= ~DEV_SUSPEND;
842 /* Fall through... */
843 case CS_EVENT_CARD_RESET:
844 if (DEV_OK(link))
845 pcmcia_request_configuration(link->handle, &link->conf);
846 break;
847 }
848
849 return 0;
850}
851
Dominik Brodowski279c9362005-06-27 16:28:38 -0700852static struct pcmcia_device_id btuart_ids[] = {
853 /* don't use this driver. Use serial_cs + hci_uart instead */
854 PCMCIA_DEVICE_NULL
855};
856MODULE_DEVICE_TABLE(pcmcia, btuart_ids);
857
Linus Torvalds1da177e2005-04-16 15:20:36 -0700858static struct pcmcia_driver btuart_driver = {
859 .owner = THIS_MODULE,
860 .drv = {
861 .name = "btuart_cs",
862 },
863 .attach = btuart_attach,
Dominik Brodowski1e212f32005-07-07 17:59:00 -0700864 .event = btuart_event,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700865 .detach = btuart_detach,
Dominik Brodowski279c9362005-06-27 16:28:38 -0700866 .id_table = btuart_ids,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700867};
868
869static int __init init_btuart_cs(void)
870{
871 return pcmcia_register_driver(&btuart_driver);
872}
873
874
875static void __exit exit_btuart_cs(void)
876{
877 pcmcia_unregister_driver(&btuart_driver);
878 BUG_ON(dev_list != NULL);
879}
880
881module_init(init_btuart_cs);
882module_exit(exit_btuart_cs);