blob: b993652bfa25d3acaaa7332b3ade101a8bd9310f [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/******************************************************************************
2* QLOGIC LINUX SOFTWARE
3*
4* QLogic QLA1280 (Ultra2) and QLA12160 (Ultra3) SCSI driver
5* Copyright (C) 2000 Qlogic Corporation (www.qlogic.com)
6* Copyright (C) 2001-2004 Jes Sorensen, Wild Open Source Inc.
7* Copyright (C) 2003-2004 Christoph Hellwig
8*
9* This program is free software; you can redistribute it and/or modify it
10* under the terms of the GNU General Public License as published by the
11* Free Software Foundation; either version 2, or (at your option) any
12* later version.
13*
14* This program is distributed in the hope that it will be useful, but
15* WITHOUT ANY WARRANTY; without even the implied warranty of
16* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
17* General Public License for more details.
18*
19******************************************************************************/
20#define QLA1280_VERSION "3.25"
21/*****************************************************************************
22 Revision History:
23 Rev 3.25.1, February 10, 2005 Christoph Hellwig
24 - use pci_map_single to map non-S/G requests
25 - remove qla1280_proc_info
26 Rev 3.25, September 28, 2004, Christoph Hellwig
27 - add support for ISP1020/1040
28 - don't include "scsi.h" anymore for 2.6.x
29 Rev 3.24.4 June 7, 2004 Christoph Hellwig
30 - restructure firmware loading, cleanup initialization code
31 - prepare support for ISP1020/1040 chips
32 Rev 3.24.3 January 19, 2004, Jes Sorensen
33 - Handle PCI DMA mask settings correctly
34 - Correct order of error handling in probe_one, free_irq should not
35 be called if request_irq failed
36 Rev 3.24.2 January 19, 2004, James Bottomley & Andrew Vasquez
37 - Big endian fixes (James)
38 - Remove bogus IOCB content on zero data transfer commands (Andrew)
39 Rev 3.24.1 January 5, 2004, Jes Sorensen
40 - Initialize completion queue to avoid OOPS on probe
41 - Handle interrupts during mailbox testing
42 Rev 3.24 November 17, 2003, Christoph Hellwig
43 - use struct list_head for completion queue
44 - avoid old Scsi_FOO typedefs
45 - cleanup 2.4 compat glue a bit
46 - use <scsi/scsi_*.h> headers on 2.6 instead of "scsi.h"
47 - make initialization for memory mapped vs port I/O more similar
48 - remove broken pci config space manipulation
49 - kill more cruft
50 - this is an almost perfect 2.6 scsi driver now! ;)
51 Rev 3.23.39 December 17, 2003, Jes Sorensen
52 - Delete completion queue from srb if mailbox command failed to
53 to avoid qla1280_done completeting qla1280_error_action's
54 obsolete context
55 - Reduce arguments for qla1280_done
56 Rev 3.23.38 October 18, 2003, Christoph Hellwig
57 - Convert to new-style hotplugable driver for 2.6
58 - Fix missing scsi_unregister/scsi_host_put on HBA removal
59 - Kill some more cruft
60 Rev 3.23.37 October 1, 2003, Jes Sorensen
61 - Make MMIO depend on CONFIG_X86_VISWS instead of yet another
62 random CONFIG option
63 - Clean up locking in probe path
64 Rev 3.23.36 October 1, 2003, Christoph Hellwig
65 - queuecommand only ever receives new commands - clear flags
66 - Reintegrate lost fixes from Linux 2.5
67 Rev 3.23.35 August 14, 2003, Jes Sorensen
68 - Build against 2.6
69 Rev 3.23.34 July 23, 2003, Jes Sorensen
70 - Remove pointless TRUE/FALSE macros
71 - Clean up vchan handling
72 Rev 3.23.33 July 3, 2003, Jes Sorensen
73 - Don't define register access macros before define determining MMIO.
74 This just happend to work out on ia64 but not elsewhere.
75 - Don't try and read from the card while it is in reset as
76 it won't respond and causes an MCA
77 Rev 3.23.32 June 23, 2003, Jes Sorensen
78 - Basic support for boot time arguments
79 Rev 3.23.31 June 8, 2003, Jes Sorensen
80 - Reduce boot time messages
81 Rev 3.23.30 June 6, 2003, Jes Sorensen
82 - Do not enable sync/wide/ppr before it has been determined
83 that the target device actually supports it
84 - Enable DMA arbitration for multi channel controllers
85 Rev 3.23.29 June 3, 2003, Jes Sorensen
86 - Port to 2.5.69
87 Rev 3.23.28 June 3, 2003, Jes Sorensen
88 - Eliminate duplicate marker commands on bus resets
89 - Handle outstanding commands appropriately on bus/device resets
90 Rev 3.23.27 May 28, 2003, Jes Sorensen
91 - Remove bogus input queue code, let the Linux SCSI layer do the work
92 - Clean up NVRAM handling, only read it once from the card
93 - Add a number of missing default nvram parameters
94 Rev 3.23.26 Beta May 28, 2003, Jes Sorensen
95 - Use completion queue for mailbox commands instead of busy wait
96 Rev 3.23.25 Beta May 27, 2003, James Bottomley
97 - Migrate to use new error handling code
98 Rev 3.23.24 Beta May 21, 2003, James Bottomley
99 - Big endian support
100 - Cleanup data direction code
101 Rev 3.23.23 Beta May 12, 2003, Jes Sorensen
102 - Switch to using MMIO instead of PIO
103 Rev 3.23.22 Beta April 15, 2003, Jes Sorensen
104 - Fix PCI parity problem with 12160 during reset.
105 Rev 3.23.21 Beta April 14, 2003, Jes Sorensen
106 - Use pci_map_page()/pci_unmap_page() instead of map_single version.
107 Rev 3.23.20 Beta April 9, 2003, Jes Sorensen
108 - Remove < 2.4.x support
109 - Introduce HOST_LOCK to make the spin lock changes portable.
110 - Remove a bunch of idiotic and unnecessary typedef's
111 - Kill all leftovers of target-mode support which never worked anyway
112 Rev 3.23.19 Beta April 11, 2002, Linus Torvalds
113 - Do qla1280_pci_config() before calling request_irq() and
114 request_region()
115 - Use pci_dma_hi32() to handle upper word of DMA addresses instead
116 of large shifts
117 - Hand correct arguments to free_irq() in case of failure
118 Rev 3.23.18 Beta April 11, 2002, Jes Sorensen
119 - Run source through Lindent and clean up the output
120 Rev 3.23.17 Beta April 11, 2002, Jes Sorensen
121 - Update SCSI firmware to qla1280 v8.15.00 and qla12160 v10.04.32
122 Rev 3.23.16 Beta March 19, 2002, Jes Sorensen
123 - Rely on mailbox commands generating interrupts - do not
124 run qla1280_isr() from ql1280_mailbox_command()
125 - Remove device_reg_t
126 - Integrate ql12160_set_target_parameters() with 1280 version
127 - Make qla1280_setup() non static
128 - Do not call qla1280_check_for_dead_scsi_bus() on every I/O request
129 sent to the card - this command pauses the firmare!!!
130 Rev 3.23.15 Beta March 19, 2002, Jes Sorensen
131 - Clean up qla1280.h - remove obsolete QL_DEBUG_LEVEL_x definitions
132 - Remove a pile of pointless and confusing (srb_t **) and
133 (scsi_lu_t *) typecasts
134 - Explicit mark that we do not use the new error handling (for now)
135 - Remove scsi_qla_host_t and use 'struct' instead
136 - Remove in_abort, watchdog_enabled, dpc, dpc_sched, bios_enabled,
137 pci_64bit_slot flags which weren't used for anything anyway
138 - Grab host->host_lock while calling qla1280_isr() from abort()
139 - Use spin_lock()/spin_unlock() in qla1280_intr_handler() - we
140 do not need to save/restore flags in the interrupt handler
141 - Enable interrupts early (before any mailbox access) in preparation
142 for cleaning up the mailbox handling
143 Rev 3.23.14 Beta March 14, 2002, Jes Sorensen
144 - Further cleanups. Remove all trace of QL_DEBUG_LEVEL_x and replace
145 it with proper use of dprintk().
146 - Make qla1280_print_scsi_cmd() and qla1280_dump_buffer() both take
147 a debug level argument to determine if data is to be printed
148 - Add KERN_* info to printk()
149 Rev 3.23.13 Beta March 14, 2002, Jes Sorensen
150 - Significant cosmetic cleanups
151 - Change debug code to use dprintk() and remove #if mess
152 Rev 3.23.12 Beta March 13, 2002, Jes Sorensen
153 - More cosmetic cleanups, fix places treating return as function
154 - use cpu_relax() in qla1280_debounce_register()
155 Rev 3.23.11 Beta March 13, 2002, Jes Sorensen
156 - Make it compile under 2.5.5
157 Rev 3.23.10 Beta October 1, 2001, Jes Sorensen
158 - Do no typecast short * to long * in QL1280BoardTbl, this
159 broke miserably on big endian boxes
160 Rev 3.23.9 Beta September 30, 2001, Jes Sorensen
161 - Remove pre 2.2 hack for checking for reentrance in interrupt handler
162 - Make data types used to receive from SCSI_{BUS,TCN,LUN}_32
163 unsigned int to match the types from struct scsi_cmnd
164 Rev 3.23.8 Beta September 29, 2001, Jes Sorensen
165 - Remove bogus timer_t typedef from qla1280.h
166 - Remove obsolete pre 2.2 PCI setup code, use proper #define's
167 for PCI_ values, call pci_set_master()
168 - Fix memleak of qla1280_buffer on module unload
169 - Only compile module parsing code #ifdef MODULE - should be
170 changed to use individual MODULE_PARM's later
171 - Remove dummy_buffer that was never modified nor printed
172 - ENTER()/LEAVE() are noops unless QL_DEBUG_LEVEL_3, hence remove
173 #ifdef QL_DEBUG_LEVEL_3/#endif around ENTER()/LEAVE() calls
174 - Remove \r from print statements, this is Linux, not DOS
175 - Remove obsolete QLA1280_{SCSILU,INTR,RING}_{LOCK,UNLOCK}
176 dummy macros
177 - Remove C++ compile hack in header file as Linux driver are not
178 supposed to be compiled as C++
179 - Kill MS_64BITS macro as it makes the code more readable
180 - Remove unnecessary flags.in_interrupts bit
181 Rev 3.23.7 Beta August 20, 2001, Jes Sorensen
182 - Dont' check for set flags on q->q_flag one by one in qla1280_next()
183 - Check whether the interrupt was generated by the QLA1280 before
184 doing any processing
185 - qla1280_status_entry(): Only zero out part of sense_buffer that
186 is not being copied into
187 - Remove more superflouous typecasts
188 - qla1280_32bit_start_scsi() replace home-brew memcpy() with memcpy()
189 Rev 3.23.6 Beta August 20, 2001, Tony Luck, Intel
190 - Don't walk the entire list in qla1280_putq_t() just to directly
191 grab the pointer to the last element afterwards
192 Rev 3.23.5 Beta August 9, 2001, Jes Sorensen
193 - Don't use SA_INTERRUPT, it's use is deprecated for this kinda driver
194 Rev 3.23.4 Beta August 8, 2001, Jes Sorensen
195 - Set dev->max_sectors to 1024
196 Rev 3.23.3 Beta August 6, 2001, Jes Sorensen
197 - Provide compat macros for pci_enable_device(), pci_find_subsys()
198 and scsi_set_pci_device()
199 - Call scsi_set_pci_device() for all devices
200 - Reduce size of kernel version dependent device probe code
201 - Move duplicate probe/init code to separate function
202 - Handle error if qla1280_mem_alloc() fails
203 - Kill OFFSET() macro and use Linux's PCI definitions instead
204 - Kill private structure defining PCI config space (struct config_reg)
205 - Only allocate I/O port region if not in MMIO mode
206 - Remove duplicate (unused) sanity check of sife of srb_t
207 Rev 3.23.2 Beta August 6, 2001, Jes Sorensen
208 - Change home-brew memset() implementations to use memset()
209 - Remove all references to COMTRACE() - accessing a PC's COM2 serial
210 port directly is not legal under Linux.
211 Rev 3.23.1 Beta April 24, 2001, Jes Sorensen
212 - Remove pre 2.2 kernel support
213 - clean up 64 bit DMA setting to use 2.4 API (provide backwards compat)
214 - Fix MMIO access to use readl/writel instead of directly
215 dereferencing pointers
216 - Nuke MSDOS debugging code
217 - Change true/false data types to int from uint8_t
218 - Use int for counters instead of uint8_t etc.
219 - Clean up size & byte order conversion macro usage
220 Rev 3.23 Beta January 11, 2001 BN Qlogic
221 - Added check of device_id when handling non
222 QLA12160s during detect().
223 Rev 3.22 Beta January 5, 2001 BN Qlogic
224 - Changed queue_task() to schedule_task()
225 for kernels 2.4.0 and higher.
226 Note: 2.4.0-testxx kernels released prior to
227 the actual 2.4.0 kernel release on January 2001
228 will get compile/link errors with schedule_task().
229 Please update your kernel to released 2.4.0 level,
230 or comment lines in this file flagged with 3.22
231 to resolve compile/link error of schedule_task().
232 - Added -DCONFIG_SMP in addition to -D__SMP__
233 in Makefile for 2.4.0 builds of driver as module.
234 Rev 3.21 Beta January 4, 2001 BN Qlogic
235 - Changed criteria of 64/32 Bit mode of HBA
236 operation according to BITS_PER_LONG rather
237 than HBA's NVRAM setting of >4Gig memory bit;
238 so that the HBA auto-configures without the need
239 to setup each system individually.
240 Rev 3.20 Beta December 5, 2000 BN Qlogic
241 - Added priority handling to IA-64 onboard SCSI
242 ISP12160 chip for kernels greater than 2.3.18.
243 - Added irqrestore for qla1280_intr_handler.
244 - Enabled /proc/scsi/qla1280 interface.
245 - Clear /proc/scsi/qla1280 counters in detect().
246 Rev 3.19 Beta October 13, 2000 BN Qlogic
247 - Declare driver_template for new kernel
248 (2.4.0 and greater) scsi initialization scheme.
249 - Update /proc/scsi entry for 2.3.18 kernels and
250 above as qla1280
251 Rev 3.18 Beta October 10, 2000 BN Qlogic
252 - Changed scan order of adapters to map
253 the QLA12160 followed by the QLA1280.
254 Rev 3.17 Beta September 18, 2000 BN Qlogic
255 - Removed warnings for 32 bit 2.4.x compiles
256 - Corrected declared size for request and response
257 DMA addresses that are kept in each ha
258 Rev. 3.16 Beta August 25, 2000 BN Qlogic
259 - Corrected 64 bit addressing issue on IA-64
260 where the upper 32 bits were not properly
261 passed to the RISC engine.
262 Rev. 3.15 Beta August 22, 2000 BN Qlogic
263 - Modified qla1280_setup_chip to properly load
264 ISP firmware for greater that 4 Gig memory on IA-64
265 Rev. 3.14 Beta August 16, 2000 BN Qlogic
266 - Added setting of dma_mask to full 64 bit
267 if flags.enable_64bit_addressing is set in NVRAM
268 Rev. 3.13 Beta August 16, 2000 BN Qlogic
269 - Use new PCI DMA mapping APIs for 2.4.x kernel
270 Rev. 3.12 July 18, 2000 Redhat & BN Qlogic
271 - Added check of pci_enable_device to detect() for 2.3.x
272 - Use pci_resource_start() instead of
273 pdev->resource[0].start in detect() for 2.3.x
274 - Updated driver version
275 Rev. 3.11 July 14, 2000 BN Qlogic
276 - Updated SCSI Firmware to following versions:
277 qla1x80: 8.13.08
278 qla1x160: 10.04.08
279 - Updated driver version to 3.11
280 Rev. 3.10 June 23, 2000 BN Qlogic
281 - Added filtering of AMI SubSys Vendor ID devices
282 Rev. 3.9
283 - DEBUG_QLA1280 undefined and new version BN Qlogic
284 Rev. 3.08b May 9, 2000 MD Dell
285 - Added logic to check against AMI subsystem vendor ID
286 Rev. 3.08 May 4, 2000 DG Qlogic
287 - Added logic to check for PCI subsystem ID.
288 Rev. 3.07 Apr 24, 2000 DG & BN Qlogic
289 - Updated SCSI Firmware to following versions:
290 qla12160: 10.01.19
291 qla1280: 8.09.00
292 Rev. 3.06 Apr 12, 2000 DG & BN Qlogic
293 - Internal revision; not released
294 Rev. 3.05 Mar 28, 2000 DG & BN Qlogic
295 - Edit correction for virt_to_bus and PROC.
296 Rev. 3.04 Mar 28, 2000 DG & BN Qlogic
297 - Merge changes from ia64 port.
298 Rev. 3.03 Mar 28, 2000 BN Qlogic
299 - Increase version to reflect new code drop with compile fix
300 of issue with inclusion of linux/spinlock for 2.3 kernels
301 Rev. 3.02 Mar 15, 2000 BN Qlogic
302 - Merge qla1280_proc_info from 2.10 code base
303 Rev. 3.01 Feb 10, 2000 BN Qlogic
304 - Corrected code to compile on a 2.2.x kernel.
305 Rev. 3.00 Jan 17, 2000 DG Qlogic
306 - Added 64-bit support.
307 Rev. 2.07 Nov 9, 1999 DG Qlogic
308 - Added new routine to set target parameters for ISP12160.
309 Rev. 2.06 Sept 10, 1999 DG Qlogic
310 - Added support for ISP12160 Ultra 3 chip.
311 Rev. 2.03 August 3, 1999 Fred Lewis, Intel DuPont
312 - Modified code to remove errors generated when compiling with
313 Cygnus IA64 Compiler.
314 - Changed conversion of pointers to unsigned longs instead of integers.
315 - Changed type of I/O port variables from uint32_t to unsigned long.
316 - Modified OFFSET macro to work with 64-bit as well as 32-bit.
317 - Changed sprintf and printk format specifiers for pointers to %p.
318 - Changed some int to long type casts where needed in sprintf & printk.
319 - Added l modifiers to sprintf and printk format specifiers for longs.
320 - Removed unused local variables.
321 Rev. 1.20 June 8, 1999 DG, Qlogic
322 Changes to support RedHat release 6.0 (kernel 2.2.5).
323 - Added SCSI exclusive access lock (io_request_lock) when accessing
324 the adapter.
325 - Added changes for the new LINUX interface template. Some new error
326 handling routines have been added to the template, but for now we
327 will use the old ones.
328 - Initial Beta Release.
329*****************************************************************************/
330
331
332#include <linux/config.h>
333#include <linux/module.h>
334
335#include <linux/version.h>
336#include <linux/types.h>
337#include <linux/string.h>
338#include <linux/errno.h>
339#include <linux/kernel.h>
340#include <linux/ioport.h>
341#include <linux/delay.h>
342#include <linux/timer.h>
343#include <linux/sched.h>
344#include <linux/pci.h>
345#include <linux/proc_fs.h>
346#include <linux/stat.h>
347#include <linux/slab.h>
348#include <linux/pci_ids.h>
349#include <linux/interrupt.h>
350#include <linux/init.h>
351
352#include <asm/io.h>
353#include <asm/irq.h>
354#include <asm/byteorder.h>
355#include <asm/processor.h>
356#include <asm/types.h>
357#include <asm/system.h>
358
359#if LINUX_VERSION_CODE >= 0x020545
360#include <scsi/scsi.h>
361#include <scsi/scsi_cmnd.h>
362#include <scsi/scsi_device.h>
363#include <scsi/scsi_host.h>
364#include <scsi/scsi_tcq.h>
365#else
366#include <linux/blk.h>
367#include "scsi.h"
368#include <scsi/scsi_host.h>
369#include "sd.h"
370#endif
371
372#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2)
373#include <asm/sn/io.h>
374#endif
375
376#if LINUX_VERSION_CODE < 0x020407
377#error "Kernels older than 2.4.7 are no longer supported"
378#endif
379
380
381/*
382 * Compile time Options:
383 * 0 - Disable and 1 - Enable
384 */
385#define DEBUG_QLA1280_INTR 0
386#define DEBUG_PRINT_NVRAM 0
387#define DEBUG_QLA1280 0
388
389/*
390 * The SGI VISWS is broken and doesn't support MMIO ;-(
391 */
392#ifdef CONFIG_X86_VISWS
393#define MEMORY_MAPPED_IO 0
394#else
395#define MEMORY_MAPPED_IO 1
396#endif
397
398#define UNIQUE_FW_NAME
399#include "qla1280.h"
400#include "ql12160_fw.h" /* ISP RISC codes */
401#include "ql1280_fw.h"
402#include "ql1040_fw.h"
403
404
405/*
406 * Missing PCI ID's
407 */
408#ifndef PCI_DEVICE_ID_QLOGIC_ISP1080
409#define PCI_DEVICE_ID_QLOGIC_ISP1080 0x1080
410#endif
411#ifndef PCI_DEVICE_ID_QLOGIC_ISP1240
412#define PCI_DEVICE_ID_QLOGIC_ISP1240 0x1240
413#endif
414#ifndef PCI_DEVICE_ID_QLOGIC_ISP1280
415#define PCI_DEVICE_ID_QLOGIC_ISP1280 0x1280
416#endif
417#ifndef PCI_DEVICE_ID_QLOGIC_ISP10160
418#define PCI_DEVICE_ID_QLOGIC_ISP10160 0x1016
419#endif
420#ifndef PCI_DEVICE_ID_QLOGIC_ISP12160
421#define PCI_DEVICE_ID_QLOGIC_ISP12160 0x1216
422#endif
423
424#ifndef PCI_VENDOR_ID_AMI
425#define PCI_VENDOR_ID_AMI 0x101e
426#endif
427
428#ifndef BITS_PER_LONG
429#error "BITS_PER_LONG not defined!"
430#endif
431#if (BITS_PER_LONG == 64) || defined CONFIG_HIGHMEM
432#define QLA_64BIT_PTR 1
433#endif
434
435#ifdef QLA_64BIT_PTR
436#define pci_dma_hi32(a) ((a >> 16) >> 16)
437#else
438#define pci_dma_hi32(a) 0
439#endif
440#define pci_dma_lo32(a) (a & 0xffffffff)
441
442#define NVRAM_DELAY() udelay(500) /* 2 microseconds */
443
444#if LINUX_VERSION_CODE < 0x020500
445#define HOST_LOCK &io_request_lock
446#define irqreturn_t void
447#define IRQ_RETVAL(foo)
448#define MSG_ORDERED_TAG 1
449
450#define DMA_BIDIRECTIONAL SCSI_DATA_UNKNOWN
451#define DMA_TO_DEVICE SCSI_DATA_WRITE
452#define DMA_FROM_DEVICE SCSI_DATA_READ
453#define DMA_NONE SCSI_DATA_NONE
454
455#ifndef HAVE_SECTOR_T
456typedef unsigned int sector_t;
457#endif
458
459static inline void
460scsi_adjust_queue_depth(struct scsi_device *device, int tag, int depth)
461{
462 if (tag) {
463 device->tagged_queue = tag;
464 device->current_tag = 0;
465 }
466 device->queue_depth = depth;
467}
468static inline struct Scsi_Host *scsi_host_alloc(Scsi_Host_Template *t, size_t s)
469{
470 return scsi_register(t, s);
471}
472static inline void scsi_host_put(struct Scsi_Host *h)
473{
474 scsi_unregister(h);
475}
476#else
477#define HOST_LOCK ha->host->host_lock
478#endif
479#if LINUX_VERSION_CODE < 0x020600
480#define DEV_SIMPLE_TAGS(device) device->tagged_queue
481/*
482 * Hack around that qla1280_remove_one is called from
483 * qla1280_release in 2.4
484 */
485#undef __devexit
486#define __devexit
487#else
488#define DEV_SIMPLE_TAGS(device) device->simple_tags
489#endif
490#if defined(__ia64__) && !defined(ia64_platform_is)
491#define ia64_platform_is(foo) (!strcmp(x, platform_name))
492#endif
493
494
495#define IS_ISP1040(ha) (ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP1020)
496#define IS_ISP1x40(ha) (ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP1020 || \
497 ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP1240)
498#define IS_ISP1x160(ha) (ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP10160 || \
499 ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP12160)
500
501
502static int qla1280_probe_one(struct pci_dev *, const struct pci_device_id *);
503static void qla1280_remove_one(struct pci_dev *);
504
505/*
506 * QLogic Driver Support Function Prototypes.
507 */
508static void qla1280_done(struct scsi_qla_host *);
509#if LINUX_VERSION_CODE < 0x020545
510static void qla1280_get_target_options(struct scsi_cmnd *, struct scsi_qla_host *);
511#endif
512static int qla1280_get_token(char *);
513static int qla1280_setup(char *s) __init;
514
515/*
516 * QLogic ISP1280 Hardware Support Function Prototypes.
517 */
518static int qla1280_load_firmware(struct scsi_qla_host *);
519static int qla1280_init_rings(struct scsi_qla_host *);
520static int qla1280_nvram_config(struct scsi_qla_host *);
521static int qla1280_mailbox_command(struct scsi_qla_host *,
522 uint8_t, uint16_t *);
523static int qla1280_bus_reset(struct scsi_qla_host *, int);
524static int qla1280_device_reset(struct scsi_qla_host *, int, int);
525static int qla1280_abort_device(struct scsi_qla_host *, int, int, int);
526static int qla1280_abort_command(struct scsi_qla_host *, struct srb *, int);
527static int qla1280_abort_isp(struct scsi_qla_host *);
528#ifdef QLA_64BIT_PTR
529static int qla1280_64bit_start_scsi(struct scsi_qla_host *, struct srb *);
530#else
531static int qla1280_32bit_start_scsi(struct scsi_qla_host *, struct srb *);
532#endif
533static void qla1280_nv_write(struct scsi_qla_host *, uint16_t);
534static void qla1280_poll(struct scsi_qla_host *);
535static void qla1280_reset_adapter(struct scsi_qla_host *);
536static void qla1280_marker(struct scsi_qla_host *, int, int, int, u8);
537static void qla1280_isp_cmd(struct scsi_qla_host *);
538static void qla1280_isr(struct scsi_qla_host *, struct list_head *);
539static void qla1280_rst_aen(struct scsi_qla_host *);
540static void qla1280_status_entry(struct scsi_qla_host *, struct response *,
541 struct list_head *);
542static void qla1280_error_entry(struct scsi_qla_host *, struct response *,
543 struct list_head *);
544static uint16_t qla1280_get_nvram_word(struct scsi_qla_host *, uint32_t);
545static uint16_t qla1280_nvram_request(struct scsi_qla_host *, uint32_t);
546static uint16_t qla1280_debounce_register(volatile uint16_t __iomem *);
547static request_t *qla1280_req_pkt(struct scsi_qla_host *);
548static int qla1280_check_for_dead_scsi_bus(struct scsi_qla_host *,
549 unsigned int);
550static void qla1280_get_target_parameters(struct scsi_qla_host *,
551 struct scsi_device *);
552static int qla1280_set_target_parameters(struct scsi_qla_host *, int, int);
553
554
555static struct qla_driver_setup driver_setup;
556
557/*
558 * convert scsi data direction to request_t control flags
559 */
560static inline uint16_t
561qla1280_data_direction(struct scsi_cmnd *cmnd)
562{
563 switch(cmnd->sc_data_direction) {
564 case DMA_FROM_DEVICE:
565 return BIT_5;
566 case DMA_TO_DEVICE:
567 return BIT_6;
568 case DMA_BIDIRECTIONAL:
569 return BIT_5 | BIT_6;
570 /*
571 * We could BUG() on default here if one of the four cases aren't
572 * met, but then again if we receive something like that from the
573 * SCSI layer we have more serious problems. This shuts up GCC.
574 */
575 case DMA_NONE:
576 default:
577 return 0;
578 }
579}
580
581#if DEBUG_QLA1280
582static void __qla1280_print_scsi_cmd(struct scsi_cmnd * cmd);
583static void __qla1280_dump_buffer(char *, int);
584#endif
585
586
587/*
588 * insmod needs to find the variable and make it point to something
589 */
590#ifdef MODULE
591static char *qla1280;
592
593/* insmod qla1280 options=verbose" */
594module_param(qla1280, charp, 0);
595#else
596__setup("qla1280=", qla1280_setup);
597#endif
598
599
600/*
601 * We use the scsi_pointer structure that's included with each scsi_command
602 * to overlay our struct srb over it. qla1280_init() checks that a srb is not
603 * bigger than a scsi_pointer.
604 */
605
606#define CMD_SP(Cmnd) &Cmnd->SCp
607#define CMD_CDBLEN(Cmnd) Cmnd->cmd_len
608#define CMD_CDBP(Cmnd) Cmnd->cmnd
609#define CMD_SNSP(Cmnd) Cmnd->sense_buffer
610#define CMD_SNSLEN(Cmnd) sizeof(Cmnd->sense_buffer)
611#define CMD_RESULT(Cmnd) Cmnd->result
612#define CMD_HANDLE(Cmnd) Cmnd->host_scribble
613#if LINUX_VERSION_CODE < 0x020545
614#define CMD_REQUEST(Cmnd) Cmnd->request.cmd
615#else
616#define CMD_REQUEST(Cmnd) Cmnd->request->cmd
617#endif
618
619#define CMD_HOST(Cmnd) Cmnd->device->host
620#define SCSI_BUS_32(Cmnd) Cmnd->device->channel
621#define SCSI_TCN_32(Cmnd) Cmnd->device->id
622#define SCSI_LUN_32(Cmnd) Cmnd->device->lun
623
624
625/*****************************************/
626/* ISP Boards supported by this driver */
627/*****************************************/
628
629struct qla_boards {
630 unsigned char name[9]; /* Board ID String */
631 int numPorts; /* Number of SCSI ports */
632 unsigned short *fwcode; /* pointer to FW array */
633 unsigned short *fwlen; /* number of words in array */
634 unsigned short *fwstart; /* start address for F/W */
635 unsigned char *fwver; /* Ptr to F/W version array */
636};
637
638/* NOTE: the last argument in each entry is used to index ql1280_board_tbl */
639static struct pci_device_id qla1280_pci_tbl[] = {
640 {PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP12160,
641 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
642#ifdef CONFIG_SCSI_QLOGIC_1280_1040
643 {PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP1020,
644 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
645#endif
646 {PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP1080,
647 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2},
648 {PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP1240,
649 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3},
650 {PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP1280,
651 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4},
652 {PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP10160,
653 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5},
654 {0,}
655};
656MODULE_DEVICE_TABLE(pci, qla1280_pci_tbl);
657
658static struct qla_boards ql1280_board_tbl[] = {
659 /* Name , Number of ports, FW details */
660 {"QLA12160", 2, &fw12160i_code01[0], &fw12160i_length01,
661 &fw12160i_addr01, &fw12160i_version_str[0]},
662 {"QLA1040", 1, &risc_code01[0], &risc_code_length01,
663 &risc_code_addr01, &firmware_version[0]},
664 {"QLA1080", 1, &fw1280ei_code01[0], &fw1280ei_length01,
665 &fw1280ei_addr01, &fw1280ei_version_str[0]},
666 {"QLA1240", 2, &fw1280ei_code01[0], &fw1280ei_length01,
667 &fw1280ei_addr01, &fw1280ei_version_str[0]},
668 {"QLA1280", 2, &fw1280ei_code01[0], &fw1280ei_length01,
669 &fw1280ei_addr01, &fw1280ei_version_str[0]},
670 {"QLA10160", 1, &fw12160i_code01[0], &fw12160i_length01,
671 &fw12160i_addr01, &fw12160i_version_str[0]},
672 {" ", 0}
673};
674
675static int qla1280_verbose = 1;
676
677#if DEBUG_QLA1280
678static int ql_debug_level = 1;
679#define dprintk(level, format, a...) \
680 do { if (ql_debug_level >= level) printk(KERN_ERR format, ##a); } while(0)
681#define qla1280_dump_buffer(level, buf, size) \
682 if (ql_debug_level >= level) __qla1280_dump_buffer(buf, size)
683#define qla1280_print_scsi_cmd(level, cmd) \
684 if (ql_debug_level >= level) __qla1280_print_scsi_cmd(cmd)
685#else
686#define ql_debug_level 0
687#define dprintk(level, format, a...) do{}while(0)
688#define qla1280_dump_buffer(a, b, c) do{}while(0)
689#define qla1280_print_scsi_cmd(a, b) do{}while(0)
690#endif
691
692#define ENTER(x) dprintk(3, "qla1280 : Entering %s()\n", x);
693#define LEAVE(x) dprintk(3, "qla1280 : Leaving %s()\n", x);
694#define ENTER_INTR(x) dprintk(4, "qla1280 : Entering %s()\n", x);
695#define LEAVE_INTR(x) dprintk(4, "qla1280 : Leaving %s()\n", x);
696
697
698static int qla1280_read_nvram(struct scsi_qla_host *ha)
699{
700 uint16_t *wptr;
701 uint8_t chksum;
702 int cnt, i;
703 struct nvram *nv;
704
705 ENTER("qla1280_read_nvram");
706
707 if (driver_setup.no_nvram)
708 return 1;
709
710 printk(KERN_INFO "scsi(%ld): Reading NVRAM\n", ha->host_no);
711
712 wptr = (uint16_t *)&ha->nvram;
713 nv = &ha->nvram;
714 chksum = 0;
715 for (cnt = 0; cnt < 3; cnt++) {
716 *wptr = qla1280_get_nvram_word(ha, cnt);
717 chksum += *wptr & 0xff;
718 chksum += (*wptr >> 8) & 0xff;
719 wptr++;
720 }
721
722 if (nv->id0 != 'I' || nv->id1 != 'S' ||
723 nv->id2 != 'P' || nv->id3 != ' ' || nv->version < 1) {
724 dprintk(2, "Invalid nvram ID or version!\n");
725 chksum = 1;
726 } else {
727 for (; cnt < sizeof(struct nvram); cnt++) {
728 *wptr = qla1280_get_nvram_word(ha, cnt);
729 chksum += *wptr & 0xff;
730 chksum += (*wptr >> 8) & 0xff;
731 wptr++;
732 }
733 }
734
735 dprintk(3, "qla1280_read_nvram: NVRAM Magic ID= %c %c %c %02x"
736 " version %i\n", nv->id0, nv->id1, nv->id2, nv->id3,
737 nv->version);
738
739
740 if (chksum) {
741 if (!driver_setup.no_nvram)
742 printk(KERN_WARNING "scsi(%ld): Unable to identify or "
743 "validate NVRAM checksum, using default "
744 "settings\n", ha->host_no);
745 ha->nvram_valid = 0;
746 } else
747 ha->nvram_valid = 1;
748
749 /* The firmware interface is, um, interesting, in that the
750 * actual firmware image on the chip is little endian, thus,
751 * the process of taking that image to the CPU would end up
752 * little endian. However, the firmare interface requires it
753 * to be read a word (two bytes) at a time.
754 *
755 * The net result of this would be that the word (and
756 * doubleword) quantites in the firmware would be correct, but
757 * the bytes would be pairwise reversed. Since most of the
758 * firmware quantites are, in fact, bytes, we do an extra
759 * le16_to_cpu() in the firmware read routine.
760 *
761 * The upshot of all this is that the bytes in the firmware
762 * are in the correct places, but the 16 and 32 bit quantites
763 * are still in little endian format. We fix that up below by
764 * doing extra reverses on them */
765 nv->isp_parameter = cpu_to_le16(nv->isp_parameter);
766 nv->firmware_feature.w = cpu_to_le16(nv->firmware_feature.w);
767 for(i = 0; i < MAX_BUSES; i++) {
768 nv->bus[i].selection_timeout = cpu_to_le16(nv->bus[i].selection_timeout);
769 nv->bus[i].max_queue_depth = cpu_to_le16(nv->bus[i].max_queue_depth);
770 }
771 dprintk(1, "qla1280_read_nvram: Completed Reading NVRAM\n");
772 LEAVE("qla1280_read_nvram");
773
774 return chksum;
775}
776
777/**************************************************************************
778 * qla1280_info
779 * Return a string describing the driver.
780 **************************************************************************/
781static const char *
782qla1280_info(struct Scsi_Host *host)
783{
784 static char qla1280_scsi_name_buffer[125];
785 char *bp;
786 struct scsi_qla_host *ha;
787 struct qla_boards *bdp;
788
789 bp = &qla1280_scsi_name_buffer[0];
790 ha = (struct scsi_qla_host *)host->hostdata;
791 bdp = &ql1280_board_tbl[ha->devnum];
792 memset(bp, 0, sizeof(qla1280_scsi_name_buffer));
793
794 sprintf (bp,
795 "QLogic %s PCI to SCSI Host Adapter\n"
796 " Firmware version: %2d.%02d.%02d, Driver version %s",
797 &bdp->name[0], bdp->fwver[0], bdp->fwver[1], bdp->fwver[2],
798 QLA1280_VERSION);
799 return bp;
800}
801
802/**************************************************************************
803 * qla1200_queuecommand
804 * Queue a command to the controller.
805 *
806 * Note:
807 * The mid-level driver tries to ensures that queuecommand never gets invoked
808 * concurrently with itself or the interrupt handler (although the
809 * interrupt handler may call this routine as part of request-completion
810 * handling). Unfortunely, it sometimes calls the scheduler in interrupt
811 * context which is a big NO! NO!.
812 **************************************************************************/
813static int
814qla1280_queuecommand(struct scsi_cmnd *cmd, void (*fn)(struct scsi_cmnd *))
815{
816 struct Scsi_Host *host = cmd->device->host;
817 struct scsi_qla_host *ha = (struct scsi_qla_host *)host->hostdata;
818 struct srb *sp = (struct srb *)&cmd->SCp;
819 int status;
820
821 cmd->scsi_done = fn;
822 sp->cmd = cmd;
823 sp->flags = 0;
824
825 qla1280_print_scsi_cmd(5, cmd);
826
827#ifdef QLA_64BIT_PTR
828 /*
829 * Using 64 bit commands if the PCI bridge doesn't support it is a
830 * bit wasteful, however this should really only happen if one's
831 * PCI controller is completely broken, like the BCM1250. For
832 * sane hardware this is not an issue.
833 */
834 status = qla1280_64bit_start_scsi(ha, sp);
835#else
836 status = qla1280_32bit_start_scsi(ha, sp);
837#endif
838 return status;
839}
840
841enum action {
842 ABORT_COMMAND,
843 ABORT_DEVICE,
844 DEVICE_RESET,
845 BUS_RESET,
846 ADAPTER_RESET,
847 FAIL
848};
849
850/* timer action for error action processor */
851static void qla1280_error_wait_timeout(unsigned long __data)
852{
853 struct scsi_cmnd *cmd = (struct scsi_cmnd *)__data;
854 struct srb *sp = (struct srb *)CMD_SP(cmd);
855
856 complete(sp->wait);
857}
858
859static void qla1280_mailbox_timeout(unsigned long __data)
860{
861 struct scsi_qla_host *ha = (struct scsi_qla_host *)__data;
862 struct device_reg __iomem *reg;
863 reg = ha->iobase;
864
865 ha->mailbox_out[0] = RD_REG_WORD(&reg->mailbox0);
866 printk(KERN_ERR "scsi(%ld): mailbox timed out, mailbox0 %04x, "
867 "ictrl %04x, istatus %04x\n", ha->host_no, ha->mailbox_out[0],
868 RD_REG_WORD(&reg->ictrl), RD_REG_WORD(&reg->istatus));
869 complete(ha->mailbox_wait);
870}
871
872/**************************************************************************
873 * qla1200_error_action
874 * The function will attempt to perform a specified error action and
875 * wait for the results (or time out).
876 *
877 * Input:
878 * cmd = Linux SCSI command packet of the command that cause the
879 * bus reset.
880 * action = error action to take (see action_t)
881 *
882 * Returns:
883 * SUCCESS or FAILED
884 *
885 * Note:
886 * Resetting the bus always succeeds - is has to, otherwise the
887 * kernel will panic! Try a surgical technique - sending a BUS
888 * DEVICE RESET message - on the offending target before pulling
889 * the SCSI bus reset line.
890 **************************************************************************/
891static int
892qla1280_error_action(struct scsi_cmnd *cmd, enum action action)
893{
894 struct scsi_qla_host *ha;
895 int bus, target, lun;
896 struct srb *sp;
897 uint16_t data;
898 unsigned char *handle;
899 int result, i;
900 DECLARE_COMPLETION(wait);
901 struct timer_list timer;
902
903 ha = (struct scsi_qla_host *)(CMD_HOST(cmd)->hostdata);
904
905 dprintk(4, "error_action %i, istatus 0x%04x\n", action,
906 RD_REG_WORD(&ha->iobase->istatus));
907
908 dprintk(4, "host_cmd 0x%04x, ictrl 0x%04x, jiffies %li\n",
909 RD_REG_WORD(&ha->iobase->host_cmd),
910 RD_REG_WORD(&ha->iobase->ictrl), jiffies);
911
912 ENTER("qla1280_error_action");
913 if (qla1280_verbose)
914 printk(KERN_INFO "scsi(%li): Resetting Cmnd=0x%p, "
915 "Handle=0x%p, action=0x%x\n",
916 ha->host_no, cmd, CMD_HANDLE(cmd), action);
917
918 if (cmd == NULL) {
919 printk(KERN_WARNING "(scsi?:?:?:?) Reset called with NULL "
920 "si_Cmnd pointer, failing.\n");
921 LEAVE("qla1280_error_action");
922 return FAILED;
923 }
924
925 ha = (struct scsi_qla_host *)cmd->device->host->hostdata;
926 sp = (struct srb *)CMD_SP(cmd);
927 handle = CMD_HANDLE(cmd);
928
929 /* Check for pending interrupts. */
930 data = qla1280_debounce_register(&ha->iobase->istatus);
931 /*
932 * The io_request_lock is held when the reset handler is called, hence
933 * the interrupt handler cannot be running in parallel as it also
934 * grabs the lock. /Jes
935 */
936 if (data & RISC_INT)
937 qla1280_isr(ha, &ha->done_q);
938
939 /*
940 * Determine the suggested action that the mid-level driver wants
941 * us to perform.
942 */
943 if (handle == (unsigned char *)INVALID_HANDLE || handle == NULL) {
944 if(action == ABORT_COMMAND) {
945 /* we never got this command */
946 printk(KERN_INFO "qla1280: Aborting a NULL handle\n");
947 return SUCCESS; /* no action - we don't have command */
948 }
949 } else {
950 sp->wait = &wait;
951 }
952
953 bus = SCSI_BUS_32(cmd);
954 target = SCSI_TCN_32(cmd);
955 lun = SCSI_LUN_32(cmd);
956
957 /* Overloading result. Here it means the success or fail of the
958 * *issue* of the action. When we return from the routine, it must
959 * mean the actual success or fail of the action */
960 result = FAILED;
961 switch (action) {
962 case FAIL:
963 break;
964
965 case ABORT_COMMAND:
966 if ((sp->flags & SRB_ABORT_PENDING)) {
967 printk(KERN_WARNING
968 "scsi(): Command has a pending abort "
969 "message - ABORT_PENDING.\n");
970 /* This should technically be impossible since we
971 * now wait for abort completion */
972 break;
973 }
974
975 for (i = 0; i < MAX_OUTSTANDING_COMMANDS; i++) {
976 if (sp == ha->outstanding_cmds[i]) {
977 dprintk(1, "qla1280: RISC aborting command\n");
978 if (qla1280_abort_command(ha, sp, i) == 0)
979 result = SUCCESS;
980 else {
981 /*
982 * Since we don't know what might
983 * have happend to the command, it
984 * is unsafe to remove it from the
985 * device's queue at this point.
986 * Wait and let the escalation
987 * process take care of it.
988 */
989 printk(KERN_WARNING
990 "scsi(%li:%i:%i:%i): Unable"
991 " to abort command!\n",
992 ha->host_no, bus, target, lun);
993 }
994 }
995 }
996 break;
997
998 case ABORT_DEVICE:
999 ha->flags.in_reset = 1;
1000 if (qla1280_verbose)
1001 printk(KERN_INFO
1002 "scsi(%ld:%d:%d:%d): Queueing abort device "
1003 "command.\n", ha->host_no, bus, target, lun);
1004 if (qla1280_abort_device(ha, bus, target, lun) == 0)
1005 result = SUCCESS;
1006 break;
1007
1008 case DEVICE_RESET:
1009 if (qla1280_verbose)
1010 printk(KERN_INFO
1011 "scsi(%ld:%d:%d:%d): Queueing device reset "
1012 "command.\n", ha->host_no, bus, target, lun);
1013 ha->flags.in_reset = 1;
1014 if (qla1280_device_reset(ha, bus, target) == 0)
1015 result = SUCCESS;
1016 break;
1017
1018 case BUS_RESET:
1019 if (qla1280_verbose)
1020 printk(KERN_INFO "qla1280(%ld:%d): Issuing BUS "
1021 "DEVICE RESET\n", ha->host_no, bus);
1022 ha->flags.in_reset = 1;
1023 if (qla1280_bus_reset(ha, bus == 0))
1024 result = SUCCESS;
1025
1026 break;
1027
1028 case ADAPTER_RESET:
1029 default:
1030 if (qla1280_verbose) {
1031 printk(KERN_INFO
1032 "scsi(%ld): Issued ADAPTER RESET\n",
1033 ha->host_no);
1034 printk(KERN_INFO "scsi(%ld): I/O processing will "
1035 "continue automatically\n", ha->host_no);
1036 }
1037 ha->flags.reset_active = 1;
1038 /*
1039 * We restarted all of the commands automatically, so the
1040 * mid-level code can expect completions momentitarily.
1041 */
1042 if (qla1280_abort_isp(ha) == 0)
1043 result = SUCCESS;
1044
1045 ha->flags.reset_active = 0;
1046 }
1047
1048 if (!list_empty(&ha->done_q))
1049 qla1280_done(ha);
1050 ha->flags.in_reset = 0;
1051
1052 /* If we didn't manage to issue the action, or we have no
1053 * command to wait for, exit here */
1054 if (result == FAILED || handle == NULL ||
1055 handle == (unsigned char *)INVALID_HANDLE) {
1056 /*
1057 * Clear completion queue to avoid qla1280_done() trying
1058 * to complete the command at a later stage after we
1059 * have exited the current context
1060 */
1061 sp->wait = NULL;
1062 goto leave;
1063 }
1064
1065 /* set up a timer just in case we're really jammed */
1066 init_timer(&timer);
1067 timer.expires = jiffies + 4*HZ;
1068 timer.data = (unsigned long)cmd;
1069 timer.function = qla1280_error_wait_timeout;
1070 add_timer(&timer);
1071
1072 /* wait for the action to complete (or the timer to expire) */
1073 spin_unlock_irq(HOST_LOCK);
1074 wait_for_completion(&wait);
1075 del_timer_sync(&timer);
1076 spin_lock_irq(HOST_LOCK);
1077 sp->wait = NULL;
1078
1079 /* the only action we might get a fail for is abort */
1080 if (action == ABORT_COMMAND) {
1081 if(sp->flags & SRB_ABORTED)
1082 result = SUCCESS;
1083 else
1084 result = FAILED;
1085 }
1086
1087 leave:
1088 dprintk(1, "RESET returning %d\n", result);
1089
1090 LEAVE("qla1280_error_action");
1091 return result;
1092}
1093
1094/**************************************************************************
1095 * qla1280_abort
1096 * Abort the specified SCSI command(s).
1097 **************************************************************************/
1098static int
1099qla1280_eh_abort(struct scsi_cmnd * cmd)
1100{
Jeff Garzik 8fa728a2005-05-28 07:54:40 -04001101 int rc;
1102
1103 spin_lock_irq(cmd->device->host->host_lock);
1104 rc = qla1280_error_action(cmd, ABORT_COMMAND);
1105 spin_unlock_irq(cmd->device->host->host_lock);
1106
1107 return rc;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001108}
1109
1110/**************************************************************************
1111 * qla1280_device_reset
1112 * Reset the specified SCSI device
1113 **************************************************************************/
1114static int
1115qla1280_eh_device_reset(struct scsi_cmnd *cmd)
1116{
Jeff Garzik 94d0e7b82005-05-28 07:55:48 -04001117 int rc;
1118
1119 spin_lock_irq(cmd->device->host->host_lock);
1120 rc = qla1280_error_action(cmd, DEVICE_RESET);
1121 spin_unlock_irq(cmd->device->host->host_lock);
1122
1123 return rc;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001124}
1125
1126/**************************************************************************
1127 * qla1280_bus_reset
1128 * Reset the specified bus.
1129 **************************************************************************/
1130static int
1131qla1280_eh_bus_reset(struct scsi_cmnd *cmd)
1132{
Jeff Garzik 68b3aa72005-05-28 07:56:31 -04001133 int rc;
1134
1135 spin_lock_irq(cmd->device->host->host_lock);
1136 rc = qla1280_error_action(cmd, BUS_RESET);
1137 spin_unlock_irq(cmd->device->host->host_lock);
1138
1139 return rc;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001140}
1141
1142/**************************************************************************
1143 * qla1280_adapter_reset
1144 * Reset the specified adapter (both channels)
1145 **************************************************************************/
1146static int
1147qla1280_eh_adapter_reset(struct scsi_cmnd *cmd)
1148{
Jeff Garzik df0ae242005-05-28 07:57:14 -04001149 int rc;
1150
1151 spin_lock_irq(cmd->device->host->host_lock);
1152 rc = qla1280_error_action(cmd, ADAPTER_RESET);
1153 spin_unlock_irq(cmd->device->host->host_lock);
1154
1155 return rc;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001156}
1157
1158static int
1159qla1280_biosparam(struct scsi_device *sdev, struct block_device *bdev,
1160 sector_t capacity, int geom[])
1161{
1162 int heads, sectors, cylinders;
1163
1164 heads = 64;
1165 sectors = 32;
1166 cylinders = (unsigned long)capacity / (heads * sectors);
1167 if (cylinders > 1024) {
1168 heads = 255;
1169 sectors = 63;
1170 cylinders = (unsigned long)capacity / (heads * sectors);
1171 /* if (cylinders > 1023)
1172 cylinders = 1023; */
1173 }
1174
1175 geom[0] = heads;
1176 geom[1] = sectors;
1177 geom[2] = cylinders;
1178
1179 return 0;
1180}
1181
1182#if LINUX_VERSION_CODE < 0x020600
1183static int
1184qla1280_detect(Scsi_Host_Template *template)
1185{
1186 struct pci_device_id *id = &qla1280_pci_tbl[0];
1187 struct pci_dev *pdev = NULL;
1188 int num_hosts = 0;
1189
1190 if (sizeof(struct srb) > sizeof(Scsi_Pointer)) {
1191 printk(KERN_WARNING
1192 "qla1280: struct srb too big, aborting\n");
1193 return 0;
1194 }
1195
1196 if ((DMA_BIDIRECTIONAL != PCI_DMA_BIDIRECTIONAL) ||
1197 (DMA_TO_DEVICE != PCI_DMA_TODEVICE) ||
1198 (DMA_FROM_DEVICE != PCI_DMA_FROMDEVICE) ||
1199 (DMA_NONE != PCI_DMA_NONE)) {
1200 printk(KERN_WARNING
1201 "qla1280: dma direction bits don't match\n");
1202 return 0;
1203 }
1204
1205#ifdef MODULE
1206 /*
1207 * If we are called as a module, the qla1280 pointer may not be null
1208 * and it would point to our bootup string, just like on the lilo
1209 * command line. IF not NULL, then process this config string with
1210 * qla1280_setup
1211 *
1212 * Boot time Options
1213 * To add options at boot time add a line to your lilo.conf file like:
1214 * append="qla1280=verbose,max_tags:{{255,255,255,255},{255,255,255,255}}"
1215 * which will result in the first four devices on the first two
1216 * controllers being set to a tagged queue depth of 32.
1217 */
1218 if (qla1280)
1219 qla1280_setup(qla1280);
1220#endif
1221
1222 /* First Initialize QLA12160 on PCI Bus 1 Dev 2 */
1223 while ((pdev = pci_find_device(id->vendor, id->device, pdev))) {
1224 if (pdev->bus->number == 1 && PCI_SLOT(pdev->devfn) == 2) {
1225 if (!qla1280_probe_one(pdev, id))
1226 num_hosts++;
1227 }
1228 }
1229
1230 pdev = NULL;
1231 /* Try and find each different type of adapter we support */
1232 for (id = &qla1280_pci_tbl[0]; id->device; id++) {
1233 while ((pdev = pci_find_device(id->vendor, id->device, pdev))) {
1234 /*
1235 * skip QLA12160 already initialized on
1236 * PCI Bus 1 Dev 2 since we already initialized
1237 * and presented it
1238 */
1239 if (id->device == PCI_DEVICE_ID_QLOGIC_ISP12160 &&
1240 pdev->bus->number == 1 &&
1241 PCI_SLOT(pdev->devfn) == 2)
1242 continue;
1243
1244 if (!qla1280_probe_one(pdev, id))
1245 num_hosts++;
1246 }
1247 }
1248
1249 return num_hosts;
1250}
1251
1252/*
1253 * This looks a bit ugly as we could just pass down host to
1254 * qla1280_remove_one, but I want to keep qla1280_release purely a wrapper
1255 * around pci_driver::remove as used from 2.6 onwards.
1256 */
1257static int
1258qla1280_release(struct Scsi_Host *host)
1259{
1260 struct scsi_qla_host *ha = (struct scsi_qla_host *)host->hostdata;
1261
1262 qla1280_remove_one(ha->pdev);
1263 return 0;
1264}
1265
1266static int
1267qla1280_biosparam_old(Disk * disk, kdev_t dev, int geom[])
1268{
1269 return qla1280_biosparam(disk->device, NULL, disk->capacity, geom);
1270}
1271#endif
1272
1273/**************************************************************************
1274 * qla1280_intr_handler
1275 * Handles the H/W interrupt
1276 **************************************************************************/
1277static irqreturn_t
1278qla1280_intr_handler(int irq, void *dev_id, struct pt_regs *regs)
1279{
1280 struct scsi_qla_host *ha;
1281 struct device_reg __iomem *reg;
1282 u16 data;
1283 int handled = 0;
1284
1285 ENTER_INTR ("qla1280_intr_handler");
1286 ha = (struct scsi_qla_host *)dev_id;
1287
1288 spin_lock(HOST_LOCK);
1289
1290 ha->isr_count++;
1291 reg = ha->iobase;
1292
1293 WRT_REG_WORD(&reg->ictrl, 0); /* disable our interrupt. */
1294
1295 data = qla1280_debounce_register(&reg->istatus);
1296 /* Check for pending interrupts. */
1297 if (data & RISC_INT) {
1298 qla1280_isr(ha, &ha->done_q);
1299 handled = 1;
1300 }
1301 if (!list_empty(&ha->done_q))
1302 qla1280_done(ha);
1303
1304 spin_unlock(HOST_LOCK);
1305
1306 /* enable our interrupt. */
1307 WRT_REG_WORD(&reg->ictrl, (ISP_EN_INT | ISP_EN_RISC));
1308
1309 LEAVE_INTR("qla1280_intr_handler");
1310 return IRQ_RETVAL(handled);
1311}
1312
1313
1314static int
1315qla1280_set_target_parameters(struct scsi_qla_host *ha, int bus, int target)
1316{
1317 uint8_t mr;
1318 uint16_t mb[MAILBOX_REGISTER_COUNT];
1319 struct nvram *nv;
1320 int status;
1321
1322 nv = &ha->nvram;
1323
1324 mr = BIT_3 | BIT_2 | BIT_1 | BIT_0;
1325
1326 /* Set Target Parameters. */
1327 mb[0] = MBC_SET_TARGET_PARAMETERS;
1328 mb[1] = (uint16_t) (bus ? target | BIT_7 : target);
1329 mb[1] <<= 8;
1330
1331 mb[2] = (nv->bus[bus].target[target].parameter.c << 8);
1332
1333 if (IS_ISP1x160(ha)) {
1334 mb[2] |= nv->bus[bus].target[target].ppr_1x160.flags.enable_ppr << 5;
1335 mb[3] = (nv->bus[bus].target[target].flags.flags1x160.sync_offset << 8) |
1336 nv->bus[bus].target[target].sync_period;
1337 mb[6] = (nv->bus[bus].target[target].ppr_1x160.flags.ppr_options << 8) |
1338 nv->bus[bus].target[target].ppr_1x160.flags.ppr_bus_width;
1339 mr |= BIT_6;
1340 } else {
1341 mb[3] = (nv->bus[bus].target[target].flags.flags1x80.sync_offset << 8) |
1342 nv->bus[bus].target[target].sync_period;
1343 }
1344
1345 status = qla1280_mailbox_command(ha, mr, &mb[0]);
1346
1347 if (status)
1348 printk(KERN_WARNING "scsi(%ld:%i:%i): "
1349 "qla1280_set_target_parameters() failed\n",
1350 ha->host_no, bus, target);
1351 return status;
1352}
1353
1354
1355/**************************************************************************
1356 * qla1280_slave_configure
1357 *
1358 * Description:
1359 * Determines the queue depth for a given device. There are two ways
1360 * a queue depth can be obtained for a tagged queueing device. One
1361 * way is the default queue depth which is determined by whether
1362 * If it is defined, then it is used
1363 * as the default queue depth. Otherwise, we use either 4 or 8 as the
1364 * default queue depth (dependent on the number of hardware SCBs).
1365 **************************************************************************/
1366static int
1367qla1280_slave_configure(struct scsi_device *device)
1368{
1369 struct scsi_qla_host *ha;
1370 int default_depth = 3;
1371 int bus = device->channel;
1372 int target = device->id;
1373 int status = 0;
1374 struct nvram *nv;
1375 unsigned long flags;
1376
1377 ha = (struct scsi_qla_host *)device->host->hostdata;
1378 nv = &ha->nvram;
1379
1380 if (qla1280_check_for_dead_scsi_bus(ha, bus))
1381 return 1;
1382
1383 if (device->tagged_supported &&
1384 (ha->bus_settings[bus].qtag_enables & (BIT_0 << target))) {
1385 scsi_adjust_queue_depth(device, MSG_ORDERED_TAG,
1386 ha->bus_settings[bus].hiwat);
1387 } else {
1388 scsi_adjust_queue_depth(device, 0, default_depth);
1389 }
1390
1391#if LINUX_VERSION_CODE > 0x020500
1392 nv->bus[bus].target[target].parameter.f.enable_sync = device->sdtr;
1393 nv->bus[bus].target[target].parameter.f.enable_wide = device->wdtr;
1394 nv->bus[bus].target[target].ppr_1x160.flags.enable_ppr = device->ppr;
1395#endif
1396
1397 if (driver_setup.no_sync ||
1398 (driver_setup.sync_mask &&
1399 (~driver_setup.sync_mask & (1 << target))))
1400 nv->bus[bus].target[target].parameter.f.enable_sync = 0;
1401 if (driver_setup.no_wide ||
1402 (driver_setup.wide_mask &&
1403 (~driver_setup.wide_mask & (1 << target))))
1404 nv->bus[bus].target[target].parameter.f.enable_wide = 0;
1405 if (IS_ISP1x160(ha)) {
1406 if (driver_setup.no_ppr ||
1407 (driver_setup.ppr_mask &&
1408 (~driver_setup.ppr_mask & (1 << target))))
1409 nv->bus[bus].target[target].ppr_1x160.flags.enable_ppr = 0;
1410 }
1411
1412 spin_lock_irqsave(HOST_LOCK, flags);
1413 if (nv->bus[bus].target[target].parameter.f.enable_sync)
1414 status = qla1280_set_target_parameters(ha, bus, target);
1415 qla1280_get_target_parameters(ha, device);
1416 spin_unlock_irqrestore(HOST_LOCK, flags);
1417 return status;
1418}
1419
1420#if LINUX_VERSION_CODE < 0x020545
1421/**************************************************************************
1422 * qla1280_select_queue_depth
1423 *
1424 * Sets the queue depth for each SCSI device hanging off the input
1425 * host adapter. We use a queue depth of 2 for devices that do not
1426 * support tagged queueing.
1427 **************************************************************************/
1428static void
1429qla1280_select_queue_depth(struct Scsi_Host *host, struct scsi_device *sdev_q)
1430{
1431 struct scsi_qla_host *ha = (struct scsi_qla_host *)host->hostdata;
1432 struct scsi_device *sdev;
1433
1434 ENTER("qla1280_select_queue_depth");
1435 for (sdev = sdev_q; sdev; sdev = sdev->next)
1436 if (sdev->host == host)
1437 qla1280_slave_configure(sdev);
1438
1439 if (sdev_q)
1440 qla1280_check_for_dead_scsi_bus(ha, sdev_q->channel);
1441 LEAVE("qla1280_select_queue_depth");
1442}
1443#endif
1444
1445/*
1446 * qla1280_done
1447 * Process completed commands.
1448 *
1449 * Input:
1450 * ha = adapter block pointer.
1451 * done_q = done queue.
1452 */
1453static void
1454qla1280_done(struct scsi_qla_host *ha)
1455{
1456 struct srb *sp;
1457 struct list_head *done_q;
1458 int bus, target, lun;
1459 struct scsi_cmnd *cmd;
1460
1461 ENTER("qla1280_done");
1462
1463 done_q = &ha->done_q;
1464
1465 while (!list_empty(done_q)) {
1466 sp = list_entry(done_q->next, struct srb, list);
1467
1468 list_del(&sp->list);
1469
1470 cmd = sp->cmd;
1471 bus = SCSI_BUS_32(cmd);
1472 target = SCSI_TCN_32(cmd);
1473 lun = SCSI_LUN_32(cmd);
1474
1475 switch ((CMD_RESULT(cmd) >> 16)) {
1476 case DID_RESET:
1477 /* Issue marker command. */
1478 qla1280_marker(ha, bus, target, 0, MK_SYNC_ID);
1479 break;
1480 case DID_ABORT:
1481 sp->flags &= ~SRB_ABORT_PENDING;
1482 sp->flags |= SRB_ABORTED;
1483 if (sp->flags & SRB_TIMEOUT)
1484 CMD_RESULT(sp->cmd) = DID_TIME_OUT << 16;
1485 break;
1486 default:
1487 break;
1488 }
1489
1490 /* Release memory used for this I/O */
1491 if (cmd->use_sg) {
1492 pci_unmap_sg(ha->pdev, cmd->request_buffer,
1493 cmd->use_sg, cmd->sc_data_direction);
1494 } else if (cmd->request_bufflen) {
1495 pci_unmap_single(ha->pdev, sp->saved_dma_handle,
1496 cmd->request_bufflen,
1497 cmd->sc_data_direction);
1498 }
1499
1500 /* Call the mid-level driver interrupt handler */
1501 CMD_HANDLE(sp->cmd) = (unsigned char *)INVALID_HANDLE;
1502 ha->actthreads--;
1503
1504#if LINUX_VERSION_CODE < 0x020500
1505 if (cmd->cmnd[0] == INQUIRY)
1506 qla1280_get_target_options(cmd, ha);
1507#endif
1508 (*(cmd)->scsi_done)(cmd);
1509
1510 if(sp->wait != NULL)
1511 complete(sp->wait);
1512 }
1513 LEAVE("qla1280_done");
1514}
1515
1516/*
1517 * Translates a ISP error to a Linux SCSI error
1518 */
1519static int
1520qla1280_return_status(struct response * sts, struct scsi_cmnd *cp)
1521{
1522 int host_status = DID_ERROR;
1523 uint16_t comp_status = le16_to_cpu(sts->comp_status);
1524 uint16_t state_flags = le16_to_cpu(sts->state_flags);
1525 uint16_t residual_length = le16_to_cpu(sts->residual_length);
1526 uint16_t scsi_status = le16_to_cpu(sts->scsi_status);
1527#if DEBUG_QLA1280_INTR
1528 static char *reason[] = {
1529 "DID_OK",
1530 "DID_NO_CONNECT",
1531 "DID_BUS_BUSY",
1532 "DID_TIME_OUT",
1533 "DID_BAD_TARGET",
1534 "DID_ABORT",
1535 "DID_PARITY",
1536 "DID_ERROR",
1537 "DID_RESET",
1538 "DID_BAD_INTR"
1539 };
1540#endif /* DEBUG_QLA1280_INTR */
1541
1542 ENTER("qla1280_return_status");
1543
1544#if DEBUG_QLA1280_INTR
1545 /*
1546 dprintk(1, "qla1280_return_status: compl status = 0x%04x\n",
1547 comp_status);
1548 */
1549#endif
1550
1551 switch (comp_status) {
1552 case CS_COMPLETE:
1553 host_status = DID_OK;
1554 break;
1555
1556 case CS_INCOMPLETE:
1557 if (!(state_flags & SF_GOT_BUS))
1558 host_status = DID_NO_CONNECT;
1559 else if (!(state_flags & SF_GOT_TARGET))
1560 host_status = DID_BAD_TARGET;
1561 else if (!(state_flags & SF_SENT_CDB))
1562 host_status = DID_ERROR;
1563 else if (!(state_flags & SF_TRANSFERRED_DATA))
1564 host_status = DID_ERROR;
1565 else if (!(state_flags & SF_GOT_STATUS))
1566 host_status = DID_ERROR;
1567 else if (!(state_flags & SF_GOT_SENSE))
1568 host_status = DID_ERROR;
1569 break;
1570
1571 case CS_RESET:
1572 host_status = DID_RESET;
1573 break;
1574
1575 case CS_ABORTED:
1576 host_status = DID_ABORT;
1577 break;
1578
1579 case CS_TIMEOUT:
1580 host_status = DID_TIME_OUT;
1581 break;
1582
1583 case CS_DATA_OVERRUN:
1584 dprintk(2, "Data overrun 0x%x\n", residual_length);
1585 dprintk(2, "qla1280_isr: response packet data\n");
1586 qla1280_dump_buffer(2, (char *)sts, RESPONSE_ENTRY_SIZE);
1587 host_status = DID_ERROR;
1588 break;
1589
1590 case CS_DATA_UNDERRUN:
1591 if ((cp->request_bufflen - residual_length) <
1592 cp->underflow) {
1593 printk(KERN_WARNING
1594 "scsi: Underflow detected - retrying "
1595 "command.\n");
1596 host_status = DID_ERROR;
1597 } else
1598 host_status = DID_OK;
1599 break;
1600
1601 default:
1602 host_status = DID_ERROR;
1603 break;
1604 }
1605
1606#if DEBUG_QLA1280_INTR
1607 dprintk(1, "qla1280 ISP status: host status (%s) scsi status %x\n",
1608 reason[host_status], scsi_status);
1609#endif
1610
1611 LEAVE("qla1280_return_status");
1612
1613 return (scsi_status & 0xff) | (host_status << 16);
1614}
1615
1616/****************************************************************************/
1617/* QLogic ISP1280 Hardware Support Functions. */
1618/****************************************************************************/
1619
1620 /*
1621 * qla2100_enable_intrs
1622 * qla2100_disable_intrs
1623 *
1624 * Input:
1625 * ha = adapter block pointer.
1626 *
1627 * Returns:
1628 * None
1629 */
1630static inline void
1631qla1280_enable_intrs(struct scsi_qla_host *ha)
1632{
1633 struct device_reg __iomem *reg;
1634
1635 reg = ha->iobase;
1636 /* enable risc and host interrupts */
1637 WRT_REG_WORD(&reg->ictrl, (ISP_EN_INT | ISP_EN_RISC));
1638 RD_REG_WORD(&reg->ictrl); /* PCI Posted Write flush */
1639 ha->flags.ints_enabled = 1;
1640}
1641
1642static inline void
1643qla1280_disable_intrs(struct scsi_qla_host *ha)
1644{
1645 struct device_reg __iomem *reg;
1646
1647 reg = ha->iobase;
1648 /* disable risc and host interrupts */
1649 WRT_REG_WORD(&reg->ictrl, 0);
1650 RD_REG_WORD(&reg->ictrl); /* PCI Posted Write flush */
1651 ha->flags.ints_enabled = 0;
1652}
1653
1654/*
1655 * qla1280_initialize_adapter
1656 * Initialize board.
1657 *
1658 * Input:
1659 * ha = adapter block pointer.
1660 *
1661 * Returns:
1662 * 0 = success
1663 */
1664static int __devinit
1665qla1280_initialize_adapter(struct scsi_qla_host *ha)
1666{
1667 struct device_reg __iomem *reg;
1668 int status;
1669 int bus;
1670#if LINUX_VERSION_CODE > 0x020500
1671 unsigned long flags;
1672#endif
1673
1674 ENTER("qla1280_initialize_adapter");
1675
1676 /* Clear adapter flags. */
1677 ha->flags.online = 0;
1678 ha->flags.disable_host_adapter = 0;
1679 ha->flags.reset_active = 0;
1680 ha->flags.abort_isp_active = 0;
1681
1682 ha->flags.ints_enabled = 0;
1683#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2)
1684 if (ia64_platform_is("sn2")) {
1685 printk(KERN_INFO "scsi(%li): Enabling SN2 PCI DMA "
1686 "dual channel lockup workaround\n", ha->host_no);
1687 ha->flags.use_pci_vchannel = 1;
1688 driver_setup.no_nvram = 1;
1689 }
1690#endif
1691
1692 /* TODO: implement support for the 1040 nvram format */
1693 if (IS_ISP1040(ha))
1694 driver_setup.no_nvram = 1;
1695
1696 dprintk(1, "Configure PCI space for adapter...\n");
1697
1698 reg = ha->iobase;
1699
1700 /* Insure mailbox registers are free. */
1701 WRT_REG_WORD(&reg->semaphore, 0);
1702 WRT_REG_WORD(&reg->host_cmd, HC_CLR_RISC_INT);
1703 WRT_REG_WORD(&reg->host_cmd, HC_CLR_HOST_INT);
1704 RD_REG_WORD(&reg->host_cmd);
1705
1706 if (qla1280_read_nvram(ha)) {
1707 dprintk(2, "qla1280_initialize_adapter: failed to read "
1708 "NVRAM\n");
1709 }
1710
1711#if LINUX_VERSION_CODE >= 0x020500
1712 /*
1713 * It's necessary to grab the spin here as qla1280_mailbox_command
1714 * needs to be able to drop the lock unconditionally to wait
1715 * for completion.
1716 * In 2.4 ->detect is called with the io_request_lock held.
1717 */
1718 spin_lock_irqsave(HOST_LOCK, flags);
1719#endif
1720
1721 status = qla1280_load_firmware(ha);
1722 if (status) {
1723 printk(KERN_ERR "scsi(%li): initialize: pci probe failed!\n",
1724 ha->host_no);
1725 goto out;
1726 }
1727
1728 /* Setup adapter based on NVRAM parameters. */
1729 dprintk(1, "scsi(%ld): Configure NVRAM parameters\n", ha->host_no);
1730 qla1280_nvram_config(ha);
1731
1732 if (ha->flags.disable_host_adapter) {
1733 status = 1;
1734 goto out;
1735 }
1736
1737 status = qla1280_init_rings(ha);
1738 if (status)
1739 goto out;
1740
1741 /* Issue SCSI reset, if we can't reset twice then bus is dead */
1742 for (bus = 0; bus < ha->ports; bus++) {
1743 if (!ha->bus_settings[bus].disable_scsi_reset &&
1744 qla1280_bus_reset(ha, bus) &&
1745 qla1280_bus_reset(ha, bus))
1746 ha->bus_settings[bus].scsi_bus_dead = 1;
1747 }
1748
1749 ha->flags.online = 1;
1750 out:
1751#if LINUX_VERSION_CODE >= 0x020500
1752 spin_unlock_irqrestore(HOST_LOCK, flags);
1753#endif
1754 if (status)
1755 dprintk(2, "qla1280_initialize_adapter: **** FAILED ****\n");
1756
1757 LEAVE("qla1280_initialize_adapter");
1758 return status;
1759}
1760
1761
1762/*
1763 * ISP Firmware Test
1764 * Checks if present version of RISC firmware is older than
1765 * driver firmware.
1766 *
1767 * Input:
1768 * ha = adapter block pointer.
1769 *
1770 * Returns:
1771 * 0 = firmware does not need to be loaded.
1772 */
1773static int
1774qla1280_isp_firmware(struct scsi_qla_host *ha)
1775{
1776 struct nvram *nv = (struct nvram *) ha->response_ring;
1777 int status = 0; /* dg 2/27 always loads RISC */
1778 uint16_t mb[MAILBOX_REGISTER_COUNT];
1779
1780 ENTER("qla1280_isp_firmware");
1781
1782 dprintk(1, "scsi(%li): Determining if RISC is loaded\n", ha->host_no);
1783
1784 /* Bad NVRAM data, load RISC code. */
1785 if (!ha->nvram_valid) {
1786 ha->flags.disable_risc_code_load = 0;
1787 } else
1788 ha->flags.disable_risc_code_load =
1789 nv->cntr_flags_1.disable_loading_risc_code;
1790
1791 if (ha->flags.disable_risc_code_load) {
1792 dprintk(3, "qla1280_isp_firmware: Telling RISC to verify "
1793 "checksum of loaded BIOS code.\n");
1794
1795 /* Verify checksum of loaded RISC code. */
1796 mb[0] = MBC_VERIFY_CHECKSUM;
1797 /* mb[1] = ql12_risc_code_addr01; */
1798 mb[1] = *ql1280_board_tbl[ha->devnum].fwstart;
1799
1800 if (!(status =
1801 qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]))) {
1802 /* Start firmware execution. */
1803 dprintk(3, "qla1280_isp_firmware: Startng F/W "
1804 "execution.\n");
1805
1806 mb[0] = MBC_EXECUTE_FIRMWARE;
1807 /* mb[1] = ql12_risc_code_addr01; */
1808 mb[1] = *ql1280_board_tbl[ha->devnum].fwstart;
1809 qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);
1810 } else
1811 printk(KERN_INFO "qla1280: RISC checksum failed.\n");
1812 } else {
1813 dprintk(1, "qla1280: NVRAM configured to load RISC load.\n");
1814 status = 1;
1815 }
1816
1817 if (status)
1818 dprintk(2, "qla1280_isp_firmware: **** Load RISC code ****\n");
1819
1820 LEAVE("qla1280_isp_firmware");
1821 return status;
1822}
1823
1824/*
1825 * Chip diagnostics
1826 * Test chip for proper operation.
1827 *
1828 * Input:
1829 * ha = adapter block pointer.
1830 *
1831 * Returns:
1832 * 0 = success.
1833 */
1834static int
1835qla1280_chip_diag(struct scsi_qla_host *ha)
1836{
1837 uint16_t mb[MAILBOX_REGISTER_COUNT];
1838 struct device_reg __iomem *reg = ha->iobase;
1839 int status = 0;
1840 int cnt;
1841 uint16_t data;
1842 dprintk(3, "qla1280_chip_diag: testing device at 0x%p \n", &reg->id_l);
1843
1844 dprintk(1, "scsi(%ld): Verifying chip\n", ha->host_no);
1845
1846 /* Soft reset chip and wait for it to finish. */
1847 WRT_REG_WORD(&reg->ictrl, ISP_RESET);
1848
1849 /*
1850 * We can't do a traditional PCI write flush here by reading
1851 * back the register. The card will not respond once the reset
1852 * is in action and we end up with a machine check exception
1853 * instead. Nothing to do but wait and hope for the best.
1854 * A portable pci_write_flush(pdev) call would be very useful here.
1855 */
1856 udelay(20);
1857 data = qla1280_debounce_register(&reg->ictrl);
1858 /*
1859 * Yet another QLogic gem ;-(
1860 */
1861 for (cnt = 1000000; cnt && data & ISP_RESET; cnt--) {
1862 udelay(5);
1863 data = RD_REG_WORD(&reg->ictrl);
1864 }
1865
1866 if (!cnt)
1867 goto fail;
1868
1869 /* Reset register cleared by chip reset. */
1870 dprintk(3, "qla1280_chip_diag: reset register cleared by chip reset\n");
1871
1872 WRT_REG_WORD(&reg->cfg_1, 0);
1873
1874 /* Reset RISC and disable BIOS which
1875 allows RISC to execute out of RAM. */
1876 WRT_REG_WORD(&reg->host_cmd, HC_RESET_RISC |
1877 HC_RELEASE_RISC | HC_DISABLE_BIOS);
1878
1879 RD_REG_WORD(&reg->id_l); /* Flush PCI write */
1880 data = qla1280_debounce_register(&reg->mailbox0);
1881
1882 /*
1883 * I *LOVE* this code!
1884 */
1885 for (cnt = 1000000; cnt && data == MBS_BUSY; cnt--) {
1886 udelay(5);
1887 data = RD_REG_WORD(&reg->mailbox0);
1888 }
1889
1890 if (!cnt)
1891 goto fail;
1892
1893 /* Check product ID of chip */
1894 dprintk(3, "qla1280_chip_diag: Checking product ID of chip\n");
1895
1896 if (RD_REG_WORD(&reg->mailbox1) != PROD_ID_1 ||
1897 (RD_REG_WORD(&reg->mailbox2) != PROD_ID_2 &&
1898 RD_REG_WORD(&reg->mailbox2) != PROD_ID_2a) ||
1899 RD_REG_WORD(&reg->mailbox3) != PROD_ID_3 ||
1900 RD_REG_WORD(&reg->mailbox4) != PROD_ID_4) {
1901 printk(KERN_INFO "qla1280: Wrong product ID = "
1902 "0x%x,0x%x,0x%x,0x%x\n",
1903 RD_REG_WORD(&reg->mailbox1),
1904 RD_REG_WORD(&reg->mailbox2),
1905 RD_REG_WORD(&reg->mailbox3),
1906 RD_REG_WORD(&reg->mailbox4));
1907 goto fail;
1908 }
1909
1910 /*
1911 * Enable ints early!!!
1912 */
1913 qla1280_enable_intrs(ha);
1914
1915 dprintk(1, "qla1280_chip_diag: Checking mailboxes of chip\n");
1916 /* Wrap Incoming Mailboxes Test. */
1917 mb[0] = MBC_MAILBOX_REGISTER_TEST;
1918 mb[1] = 0xAAAA;
1919 mb[2] = 0x5555;
1920 mb[3] = 0xAA55;
1921 mb[4] = 0x55AA;
1922 mb[5] = 0xA5A5;
1923 mb[6] = 0x5A5A;
1924 mb[7] = 0x2525;
1925
1926 status = qla1280_mailbox_command(ha, 0xff, mb);
1927 if (status)
1928 goto fail;
1929
1930 if (mb[1] != 0xAAAA || mb[2] != 0x5555 || mb[3] != 0xAA55 ||
1931 mb[4] != 0x55AA || mb[5] != 0xA5A5 || mb[6] != 0x5A5A ||
1932 mb[7] != 0x2525) {
1933 printk(KERN_INFO "qla1280: Failed mbox check\n");
1934 goto fail;
1935 }
1936
1937 dprintk(3, "qla1280_chip_diag: exiting normally\n");
1938 return 0;
1939 fail:
1940 dprintk(2, "qla1280_chip_diag: **** FAILED ****\n");
1941 return status;
1942}
1943
1944static int
1945qla1280_load_firmware_pio(struct scsi_qla_host *ha)
1946{
1947 uint16_t risc_address, *risc_code_address, risc_code_size;
1948 uint16_t mb[MAILBOX_REGISTER_COUNT], i;
1949 int err;
1950
1951 /* Load RISC code. */
1952 risc_address = *ql1280_board_tbl[ha->devnum].fwstart;
1953 risc_code_address = ql1280_board_tbl[ha->devnum].fwcode;
1954 risc_code_size = *ql1280_board_tbl[ha->devnum].fwlen;
1955
1956 for (i = 0; i < risc_code_size; i++) {
1957 mb[0] = MBC_WRITE_RAM_WORD;
1958 mb[1] = risc_address + i;
1959 mb[2] = risc_code_address[i];
1960
1961 err = qla1280_mailbox_command(ha, BIT_0 | BIT_1 | BIT_2, mb);
1962 if (err) {
1963 printk(KERN_ERR "scsi(%li): Failed to load firmware\n",
1964 ha->host_no);
1965 return err;
1966 }
1967 }
1968
1969 return 0;
1970}
1971
1972#define DUMP_IT_BACK 0 /* for debug of RISC loading */
1973static int
1974qla1280_load_firmware_dma(struct scsi_qla_host *ha)
1975{
1976 uint16_t risc_address, *risc_code_address, risc_code_size;
1977 uint16_t mb[MAILBOX_REGISTER_COUNT], cnt;
1978 int err = 0, num, i;
1979#if DUMP_IT_BACK
1980 uint8_t *sp, *tbuf;
1981 dma_addr_t p_tbuf;
1982
1983 tbuf = pci_alloc_consistent(ha->pdev, 8000, &p_tbuf);
1984 if (!tbuf)
1985 return -ENOMEM;
1986#endif
1987
1988 /* Load RISC code. */
1989 risc_address = *ql1280_board_tbl[ha->devnum].fwstart;
1990 risc_code_address = ql1280_board_tbl[ha->devnum].fwcode;
1991 risc_code_size = *ql1280_board_tbl[ha->devnum].fwlen;
1992
1993 dprintk(1, "%s: DMA RISC code (%i) words\n",
1994 __FUNCTION__, risc_code_size);
1995
1996 num = 0;
1997 while (risc_code_size > 0) {
1998 int warn __attribute__((unused)) = 0;
1999
2000 cnt = 2000 >> 1;
2001
2002 if (cnt > risc_code_size)
2003 cnt = risc_code_size;
2004
2005 dprintk(2, "qla1280_setup_chip: loading risc @ =(0x%p),"
2006 "%d,%d(0x%x)\n",
2007 risc_code_address, cnt, num, risc_address);
2008 for(i = 0; i < cnt; i++)
2009 ((uint16_t *)ha->request_ring)[i] =
2010 cpu_to_le16(risc_code_address[i]);
2011
2012 mb[0] = MBC_LOAD_RAM;
2013 mb[1] = risc_address;
2014 mb[4] = cnt;
2015 mb[3] = ha->request_dma & 0xffff;
2016 mb[2] = (ha->request_dma >> 16) & 0xffff;
2017 mb[7] = pci_dma_hi32(ha->request_dma) & 0xffff;
2018 mb[6] = pci_dma_hi32(ha->request_dma) >> 16;
2019 dprintk(2, "%s: op=%d 0x%p = 0x%4x,0x%4x,0x%4x,0x%4x\n",
2020 __FUNCTION__, mb[0],
2021 (void *)(long)ha->request_dma,
2022 mb[6], mb[7], mb[2], mb[3]);
2023 err = qla1280_mailbox_command(ha, BIT_4 | BIT_3 | BIT_2 |
2024 BIT_1 | BIT_0, mb);
2025 if (err) {
2026 printk(KERN_ERR "scsi(%li): Failed to load partial "
2027 "segment of f\n", ha->host_no);
2028 goto out;
2029 }
2030
2031#if DUMP_IT_BACK
2032 mb[0] = MBC_DUMP_RAM;
2033 mb[1] = risc_address;
2034 mb[4] = cnt;
2035 mb[3] = p_tbuf & 0xffff;
2036 mb[2] = (p_tbuf >> 16) & 0xffff;
2037 mb[7] = pci_dma_hi32(p_tbuf) & 0xffff;
2038 mb[6] = pci_dma_hi32(p_tbuf) >> 16;
2039
2040 err = qla1280_mailbox_command(ha, BIT_4 | BIT_3 | BIT_2 |
2041 BIT_1 | BIT_0, mb);
2042 if (err) {
2043 printk(KERN_ERR
2044 "Failed to dump partial segment of f/w\n");
2045 goto out;
2046 }
2047 sp = (uint8_t *)ha->request_ring;
2048 for (i = 0; i < (cnt << 1); i++) {
2049 if (tbuf[i] != sp[i] && warn++ < 10) {
2050 printk(KERN_ERR "%s: FW compare error @ "
2051 "byte(0x%x) loop#=%x\n",
2052 __FUNCTION__, i, num);
2053 printk(KERN_ERR "%s: FWbyte=%x "
2054 "FWfromChip=%x\n",
2055 __FUNCTION__, sp[i], tbuf[i]);
2056 /*break; */
2057 }
2058 }
2059#endif
2060 risc_address += cnt;
2061 risc_code_size = risc_code_size - cnt;
2062 risc_code_address = risc_code_address + cnt;
2063 num++;
2064 }
2065
2066 out:
2067#if DUMP_IT_BACK
2068 pci_free_consistent(ha->pdev, 8000, tbuf, p_tbuf);
2069#endif
2070 return err;
2071}
2072
2073static int
2074qla1280_start_firmware(struct scsi_qla_host *ha)
2075{
2076 uint16_t mb[MAILBOX_REGISTER_COUNT];
2077 int err;
2078
2079 dprintk(1, "%s: Verifying checksum of loaded RISC code.\n",
2080 __FUNCTION__);
2081
2082 /* Verify checksum of loaded RISC code. */
2083 mb[0] = MBC_VERIFY_CHECKSUM;
2084 /* mb[1] = ql12_risc_code_addr01; */
2085 mb[1] = *ql1280_board_tbl[ha->devnum].fwstart;
2086 err = qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);
2087 if (err) {
2088 printk(KERN_ERR "scsi(%li): Failed checksum\n", ha->host_no);
2089 return err;
2090 }
2091
2092 /* Start firmware execution. */
2093 dprintk(1, "%s: start firmware running.\n", __FUNCTION__);
2094 mb[0] = MBC_EXECUTE_FIRMWARE;
2095 mb[1] = *ql1280_board_tbl[ha->devnum].fwstart;
2096 err = qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);
2097 if (err) {
2098 printk(KERN_ERR "scsi(%li): Failed to start firmware\n",
2099 ha->host_no);
2100 }
2101
2102 return err;
2103}
2104
2105static int
2106qla1280_load_firmware(struct scsi_qla_host *ha)
2107{
2108 int err = -ENODEV;
2109
2110 /* If firmware needs to be loaded */
2111 if (!qla1280_isp_firmware(ha)) {
2112 printk(KERN_ERR "scsi(%li): isp_firmware() failed!\n",
2113 ha->host_no);
2114 goto out;
2115 }
2116
2117 err = qla1280_chip_diag(ha);
2118 if (err)
2119 goto out;
2120 if (IS_ISP1040(ha))
2121 err = qla1280_load_firmware_pio(ha);
2122 else
2123 err = qla1280_load_firmware_dma(ha);
2124 if (err)
2125 goto out;
2126 err = qla1280_start_firmware(ha);
2127 out:
2128 return err;
2129}
2130
2131/*
2132 * Initialize rings
2133 *
2134 * Input:
2135 * ha = adapter block pointer.
2136 * ha->request_ring = request ring virtual address
2137 * ha->response_ring = response ring virtual address
2138 * ha->request_dma = request ring physical address
2139 * ha->response_dma = response ring physical address
2140 *
2141 * Returns:
2142 * 0 = success.
2143 */
2144static int
2145qla1280_init_rings(struct scsi_qla_host *ha)
2146{
2147 uint16_t mb[MAILBOX_REGISTER_COUNT];
2148 int status = 0;
2149
2150 ENTER("qla1280_init_rings");
2151
2152 /* Clear outstanding commands array. */
2153 memset(ha->outstanding_cmds, 0,
2154 sizeof(struct srb *) * MAX_OUTSTANDING_COMMANDS);
2155
2156 /* Initialize request queue. */
2157 ha->request_ring_ptr = ha->request_ring;
2158 ha->req_ring_index = 0;
2159 ha->req_q_cnt = REQUEST_ENTRY_CNT;
2160 /* mb[0] = MBC_INIT_REQUEST_QUEUE; */
2161 mb[0] = MBC_INIT_REQUEST_QUEUE_A64;
2162 mb[1] = REQUEST_ENTRY_CNT;
2163 mb[3] = ha->request_dma & 0xffff;
2164 mb[2] = (ha->request_dma >> 16) & 0xffff;
2165 mb[4] = 0;
2166 mb[7] = pci_dma_hi32(ha->request_dma) & 0xffff;
2167 mb[6] = pci_dma_hi32(ha->request_dma) >> 16;
2168 if (!(status = qla1280_mailbox_command(ha, BIT_7 | BIT_6 | BIT_4 |
2169 BIT_3 | BIT_2 | BIT_1 | BIT_0,
2170 &mb[0]))) {
2171 /* Initialize response queue. */
2172 ha->response_ring_ptr = ha->response_ring;
2173 ha->rsp_ring_index = 0;
2174 /* mb[0] = MBC_INIT_RESPONSE_QUEUE; */
2175 mb[0] = MBC_INIT_RESPONSE_QUEUE_A64;
2176 mb[1] = RESPONSE_ENTRY_CNT;
2177 mb[3] = ha->response_dma & 0xffff;
2178 mb[2] = (ha->response_dma >> 16) & 0xffff;
2179 mb[5] = 0;
2180 mb[7] = pci_dma_hi32(ha->response_dma) & 0xffff;
2181 mb[6] = pci_dma_hi32(ha->response_dma) >> 16;
2182 status = qla1280_mailbox_command(ha, BIT_7 | BIT_6 | BIT_5 |
2183 BIT_3 | BIT_2 | BIT_1 | BIT_0,
2184 &mb[0]);
2185 }
2186
2187 if (status)
2188 dprintk(2, "qla1280_init_rings: **** FAILED ****\n");
2189
2190 LEAVE("qla1280_init_rings");
2191 return status;
2192}
2193
2194static void
2195qla1280_print_settings(struct nvram *nv)
2196{
2197 dprintk(1, "qla1280 : initiator scsi id bus[0]=%d\n",
2198 nv->bus[0].config_1.initiator_id);
2199 dprintk(1, "qla1280 : initiator scsi id bus[1]=%d\n",
2200 nv->bus[1].config_1.initiator_id);
2201
2202 dprintk(1, "qla1280 : bus reset delay[0]=%d\n",
2203 nv->bus[0].bus_reset_delay);
2204 dprintk(1, "qla1280 : bus reset delay[1]=%d\n",
2205 nv->bus[1].bus_reset_delay);
2206
2207 dprintk(1, "qla1280 : retry count[0]=%d\n", nv->bus[0].retry_count);
2208 dprintk(1, "qla1280 : retry delay[0]=%d\n", nv->bus[0].retry_delay);
2209 dprintk(1, "qla1280 : retry count[1]=%d\n", nv->bus[1].retry_count);
2210 dprintk(1, "qla1280 : retry delay[1]=%d\n", nv->bus[1].retry_delay);
2211
2212 dprintk(1, "qla1280 : async data setup time[0]=%d\n",
2213 nv->bus[0].config_2.async_data_setup_time);
2214 dprintk(1, "qla1280 : async data setup time[1]=%d\n",
2215 nv->bus[1].config_2.async_data_setup_time);
2216
2217 dprintk(1, "qla1280 : req/ack active negation[0]=%d\n",
2218 nv->bus[0].config_2.req_ack_active_negation);
2219 dprintk(1, "qla1280 : req/ack active negation[1]=%d\n",
2220 nv->bus[1].config_2.req_ack_active_negation);
2221
2222 dprintk(1, "qla1280 : data line active negation[0]=%d\n",
2223 nv->bus[0].config_2.data_line_active_negation);
2224 dprintk(1, "qla1280 : data line active negation[1]=%d\n",
2225 nv->bus[1].config_2.data_line_active_negation);
2226
2227 dprintk(1, "qla1280 : disable loading risc code=%d\n",
2228 nv->cntr_flags_1.disable_loading_risc_code);
2229
2230 dprintk(1, "qla1280 : enable 64bit addressing=%d\n",
2231 nv->cntr_flags_1.enable_64bit_addressing);
2232
2233 dprintk(1, "qla1280 : selection timeout limit[0]=%d\n",
2234 nv->bus[0].selection_timeout);
2235 dprintk(1, "qla1280 : selection timeout limit[1]=%d\n",
2236 nv->bus[1].selection_timeout);
2237
2238 dprintk(1, "qla1280 : max queue depth[0]=%d\n",
2239 nv->bus[0].max_queue_depth);
2240 dprintk(1, "qla1280 : max queue depth[1]=%d\n",
2241 nv->bus[1].max_queue_depth);
2242}
2243
2244static void
2245qla1280_set_target_defaults(struct scsi_qla_host *ha, int bus, int target)
2246{
2247 struct nvram *nv = &ha->nvram;
2248
2249 nv->bus[bus].target[target].parameter.f.renegotiate_on_error = 1;
2250 nv->bus[bus].target[target].parameter.f.auto_request_sense = 1;
2251 nv->bus[bus].target[target].parameter.f.tag_queuing = 1;
2252 nv->bus[bus].target[target].parameter.f.enable_sync = 1;
2253#if 1 /* Some SCSI Processors do not seem to like this */
2254 nv->bus[bus].target[target].parameter.f.enable_wide = 1;
2255#endif
2256 nv->bus[bus].target[target].parameter.f.parity_checking = 1;
2257 nv->bus[bus].target[target].parameter.f.disconnect_allowed = 1;
2258 nv->bus[bus].target[target].execution_throttle =
2259 nv->bus[bus].max_queue_depth - 1;
2260
2261 if (IS_ISP1x160(ha)) {
2262 nv->bus[bus].target[target].flags.flags1x160.device_enable = 1;
2263 nv->bus[bus].target[target].flags.flags1x160.sync_offset = 0x0e;
2264 nv->bus[bus].target[target].sync_period = 9;
2265 nv->bus[bus].target[target].ppr_1x160.flags.enable_ppr = 1;
2266 nv->bus[bus].target[target].ppr_1x160.flags.ppr_options = 2;
2267 nv->bus[bus].target[target].ppr_1x160.flags.ppr_bus_width = 1;
2268 } else {
2269 nv->bus[bus].target[target].flags.flags1x80.device_enable = 1;
2270 nv->bus[bus].target[target].flags.flags1x80.sync_offset = 12;
2271 nv->bus[bus].target[target].sync_period = 10;
2272 }
2273}
2274
2275static void
2276qla1280_set_defaults(struct scsi_qla_host *ha)
2277{
2278 struct nvram *nv = &ha->nvram;
2279 int bus, target;
2280
2281 dprintk(1, "Using defaults for NVRAM: \n");
2282 memset(nv, 0, sizeof(struct nvram));
2283
2284 /* nv->cntr_flags_1.disable_loading_risc_code = 1; */
2285 nv->firmware_feature.f.enable_fast_posting = 1;
2286 nv->firmware_feature.f.disable_synchronous_backoff = 1;
2287 nv->termination.f.scsi_bus_0_control = 3;
2288 nv->termination.f.scsi_bus_1_control = 3;
2289 nv->termination.f.auto_term_support = 1;
2290
2291 /*
2292 * Set default FIFO magic - What appropriate values would be here
2293 * is unknown. This is what I have found testing with 12160s.
2294 *
2295 * Now, I would love the magic decoder ring for this one, the
2296 * header file provided by QLogic seems to be bogus or incomplete
2297 * at best.
2298 */
2299 nv->isp_config.c = ISP_CFG1_BENAB|ISP_CFG1_F128;
2300 if (IS_ISP1x160(ha))
2301 nv->isp_parameter = 0x01; /* fast memory enable */
2302
2303 for (bus = 0; bus < MAX_BUSES; bus++) {
2304 nv->bus[bus].config_1.initiator_id = 7;
2305 nv->bus[bus].config_2.req_ack_active_negation = 1;
2306 nv->bus[bus].config_2.data_line_active_negation = 1;
2307 nv->bus[bus].selection_timeout = 250;
2308 nv->bus[bus].max_queue_depth = 256;
2309
2310 if (IS_ISP1040(ha)) {
2311 nv->bus[bus].bus_reset_delay = 3;
2312 nv->bus[bus].config_2.async_data_setup_time = 6;
2313 nv->bus[bus].retry_delay = 1;
2314 } else {
2315 nv->bus[bus].bus_reset_delay = 5;
2316 nv->bus[bus].config_2.async_data_setup_time = 8;
2317 }
2318
2319 for (target = 0; target < MAX_TARGETS; target++)
2320 qla1280_set_target_defaults(ha, bus, target);
2321 }
2322}
2323
2324static int
2325qla1280_config_target(struct scsi_qla_host *ha, int bus, int target)
2326{
2327 struct nvram *nv = &ha->nvram;
2328 uint16_t mb[MAILBOX_REGISTER_COUNT];
2329 int status, lun;
2330
2331 /* Set Target Parameters. */
2332 mb[0] = MBC_SET_TARGET_PARAMETERS;
2333 mb[1] = (uint16_t) (bus ? target | BIT_7 : target);
2334 mb[1] <<= 8;
2335
2336 /*
2337 * Do not enable wide, sync, and ppr for the initial
2338 * INQUIRY run. We enable this later if we determine
2339 * the target actually supports it.
2340 */
2341 nv->bus[bus].target[target].parameter.f.
2342 auto_request_sense = 1;
2343 nv->bus[bus].target[target].parameter.f.
2344 stop_queue_on_check = 0;
2345
2346 if (IS_ISP1x160(ha))
2347 nv->bus[bus].target[target].ppr_1x160.
2348 flags.enable_ppr = 0;
2349
2350 /*
2351 * No sync, wide, etc. while probing
2352 */
2353 mb[2] = (nv->bus[bus].target[target].parameter.c << 8) &
2354 ~(TP_SYNC /*| TP_WIDE | TP_PPR*/);
2355
2356 if (IS_ISP1x160(ha))
2357 mb[3] = nv->bus[bus].target[target].flags.flags1x160.sync_offset << 8;
2358 else
2359 mb[3] = nv->bus[bus].target[target].flags.flags1x80.sync_offset << 8;
2360 mb[3] |= nv->bus[bus].target[target].sync_period;
2361
2362 status = qla1280_mailbox_command(ha, BIT_3 | BIT_2 | BIT_1 | BIT_0, &mb[0]);
2363
2364 /* Save Tag queuing enable flag. */
2365 mb[0] = BIT_0 << target;
2366 if (nv->bus[bus].target[target].parameter.f.tag_queuing)
2367 ha->bus_settings[bus].qtag_enables |= mb[0];
2368
2369 /* Save Device enable flag. */
2370 if (IS_ISP1x160(ha)) {
2371 if (nv->bus[bus].target[target].flags.flags1x160.device_enable)
2372 ha->bus_settings[bus].device_enables |= mb[0];
2373 ha->bus_settings[bus].lun_disables |= 0;
2374 } else {
2375 if (nv->bus[bus].target[target].flags.flags1x80.device_enable)
2376 ha->bus_settings[bus].device_enables |= mb[0];
2377 /* Save LUN disable flag. */
2378 if (nv->bus[bus].target[target].flags.flags1x80.lun_disable)
2379 ha->bus_settings[bus].lun_disables |= mb[0];
2380 }
2381
2382 /* Set Device Queue Parameters. */
2383 for (lun = 0; lun < MAX_LUNS; lun++) {
2384 mb[0] = MBC_SET_DEVICE_QUEUE;
2385 mb[1] = (uint16_t)(bus ? target | BIT_7 : target);
2386 mb[1] = mb[1] << 8 | lun;
2387 mb[2] = nv->bus[bus].max_queue_depth;
2388 mb[3] = nv->bus[bus].target[target].execution_throttle;
2389 status |= qla1280_mailbox_command(ha, 0x0f, &mb[0]);
2390 }
2391
2392 return status;
2393}
2394
2395static int
2396qla1280_config_bus(struct scsi_qla_host *ha, int bus)
2397{
2398 struct nvram *nv = &ha->nvram;
2399 uint16_t mb[MAILBOX_REGISTER_COUNT];
2400 int target, status;
2401
2402 /* SCSI Reset Disable. */
2403 ha->bus_settings[bus].disable_scsi_reset =
2404 nv->bus[bus].config_1.scsi_reset_disable;
2405
2406 /* Initiator ID. */
2407 ha->bus_settings[bus].id = nv->bus[bus].config_1.initiator_id;
2408 mb[0] = MBC_SET_INITIATOR_ID;
2409 mb[1] = bus ? ha->bus_settings[bus].id | BIT_7 :
2410 ha->bus_settings[bus].id;
2411 status = qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);
2412
2413 /* Reset Delay. */
2414 ha->bus_settings[bus].bus_reset_delay =
2415 nv->bus[bus].bus_reset_delay;
2416
2417 /* Command queue depth per device. */
2418 ha->bus_settings[bus].hiwat = nv->bus[bus].max_queue_depth - 1;
2419
2420 /* Set target parameters. */
2421 for (target = 0; target < MAX_TARGETS; target++)
2422 status |= qla1280_config_target(ha, bus, target);
2423
2424 return status;
2425}
2426
2427static int
2428qla1280_nvram_config(struct scsi_qla_host *ha)
2429{
2430 struct device_reg __iomem *reg = ha->iobase;
2431 struct nvram *nv = &ha->nvram;
2432 int bus, target, status = 0;
2433 uint16_t mb[MAILBOX_REGISTER_COUNT];
2434 uint16_t mask;
2435
2436 ENTER("qla1280_nvram_config");
2437
2438 if (ha->nvram_valid) {
2439 /* Always force AUTO sense for LINUX SCSI */
2440 for (bus = 0; bus < MAX_BUSES; bus++)
2441 for (target = 0; target < MAX_TARGETS; target++) {
2442 nv->bus[bus].target[target].parameter.f.
2443 auto_request_sense = 1;
2444 }
2445 } else {
2446 qla1280_set_defaults(ha);
2447 }
2448
2449 qla1280_print_settings(nv);
2450
2451 /* Disable RISC load of firmware. */
2452 ha->flags.disable_risc_code_load =
2453 nv->cntr_flags_1.disable_loading_risc_code;
2454
2455 if (IS_ISP1040(ha)) {
2456 uint16_t hwrev, cfg1, cdma_conf, ddma_conf;
2457
2458 hwrev = RD_REG_WORD(&reg->cfg_0) & ISP_CFG0_HWMSK;
2459
2460 cfg1 = RD_REG_WORD(&reg->cfg_1);
2461 cdma_conf = RD_REG_WORD(&reg->cdma_cfg);
2462 ddma_conf = RD_REG_WORD(&reg->ddma_cfg);
2463
2464 /* Busted fifo, says mjacob. */
2465 if (hwrev == ISP_CFG0_1040A)
2466 WRT_REG_WORD(&reg->cfg_1, cfg1 | ISP_CFG1_F64);
2467 else
2468 WRT_REG_WORD(&reg->cfg_1, cfg1 | ISP_CFG1_F64 | ISP_CFG1_BENAB);
2469
2470 WRT_REG_WORD(&reg->cdma_cfg, cdma_conf | CDMA_CONF_BENAB);
2471 WRT_REG_WORD(&reg->ddma_cfg, cdma_conf | DDMA_CONF_BENAB);
2472 } else {
2473 /* Set ISP hardware DMA burst */
2474 mb[0] = nv->isp_config.c;
2475 /* Enable DMA arbitration on dual channel controllers */
2476 if (ha->ports > 1)
2477 mb[0] |= BIT_13;
2478 WRT_REG_WORD(&reg->cfg_1, mb[0]);
2479
2480 /* Set SCSI termination. */
2481 WRT_REG_WORD(&reg->gpio_enable, (BIT_3 + BIT_2 + BIT_1 + BIT_0));
2482 mb[0] = nv->termination.c & (BIT_3 + BIT_2 + BIT_1 + BIT_0);
2483 WRT_REG_WORD(&reg->gpio_data, mb[0]);
2484 }
2485
2486 /* ISP parameter word. */
2487 mb[0] = MBC_SET_SYSTEM_PARAMETER;
2488 mb[1] = nv->isp_parameter;
2489 status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);
2490
2491 if (IS_ISP1x40(ha)) {
2492 /* clock rate - for qla1240 and older, only */
2493 mb[0] = MBC_SET_CLOCK_RATE;
2494 mb[1] = 40;
2495 status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);
2496 }
2497
2498 /* Firmware feature word. */
2499 mb[0] = MBC_SET_FIRMWARE_FEATURES;
2500 mask = BIT_5 | BIT_1 | BIT_0;
2501 mb[1] = le16_to_cpu(nv->firmware_feature.w) & (mask);
2502#if defined(CONFIG_IA64_GENERIC) || defined (CONFIG_IA64_SGI_SN2)
2503 if (ia64_platform_is("sn2")) {
2504 printk(KERN_INFO "scsi(%li): Enabling SN2 PCI DMA "
2505 "workaround\n", ha->host_no);
2506 mb[1] |= BIT_9;
2507 }
2508#endif
2509 status |= qla1280_mailbox_command(ha, mask, &mb[0]);
2510
2511 /* Retry count and delay. */
2512 mb[0] = MBC_SET_RETRY_COUNT;
2513 mb[1] = nv->bus[0].retry_count;
2514 mb[2] = nv->bus[0].retry_delay;
2515 mb[6] = nv->bus[1].retry_count;
2516 mb[7] = nv->bus[1].retry_delay;
2517 status |= qla1280_mailbox_command(ha, BIT_7 | BIT_6 | BIT_2 |
2518 BIT_1 | BIT_0, &mb[0]);
2519
2520 /* ASYNC data setup time. */
2521 mb[0] = MBC_SET_ASYNC_DATA_SETUP;
2522 mb[1] = nv->bus[0].config_2.async_data_setup_time;
2523 mb[2] = nv->bus[1].config_2.async_data_setup_time;
2524 status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]);
2525
2526 /* Active negation states. */
2527 mb[0] = MBC_SET_ACTIVE_NEGATION;
2528 mb[1] = 0;
2529 if (nv->bus[0].config_2.req_ack_active_negation)
2530 mb[1] |= BIT_5;
2531 if (nv->bus[0].config_2.data_line_active_negation)
2532 mb[1] |= BIT_4;
2533 mb[2] = 0;
2534 if (nv->bus[1].config_2.req_ack_active_negation)
2535 mb[2] |= BIT_5;
2536 if (nv->bus[1].config_2.data_line_active_negation)
2537 mb[2] |= BIT_4;
2538 status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]);
2539
2540 mb[0] = MBC_SET_DATA_OVERRUN_RECOVERY;
2541 mb[1] = 2; /* Reset SCSI bus and return all outstanding IO */
2542 status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);
2543
2544 /* thingy */
2545 mb[0] = MBC_SET_PCI_CONTROL;
2546 mb[1] = 2; /* Data DMA Channel Burst Enable */
2547 mb[2] = 2; /* Command DMA Channel Burst Enable */
2548 status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]);
2549
2550 mb[0] = MBC_SET_TAG_AGE_LIMIT;
2551 mb[1] = 8;
2552 status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);
2553
2554 /* Selection timeout. */
2555 mb[0] = MBC_SET_SELECTION_TIMEOUT;
2556 mb[1] = nv->bus[0].selection_timeout;
2557 mb[2] = nv->bus[1].selection_timeout;
2558 status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]);
2559
2560 for (bus = 0; bus < ha->ports; bus++)
2561 status |= qla1280_config_bus(ha, bus);
2562
2563 if (status)
2564 dprintk(2, "qla1280_nvram_config: **** FAILED ****\n");
2565
2566 LEAVE("qla1280_nvram_config");
2567 return status;
2568}
2569
2570/*
2571 * Get NVRAM data word
2572 * Calculates word position in NVRAM and calls request routine to
2573 * get the word from NVRAM.
2574 *
2575 * Input:
2576 * ha = adapter block pointer.
2577 * address = NVRAM word address.
2578 *
2579 * Returns:
2580 * data word.
2581 */
2582static uint16_t
2583qla1280_get_nvram_word(struct scsi_qla_host *ha, uint32_t address)
2584{
2585 uint32_t nv_cmd;
2586 uint16_t data;
2587
2588 nv_cmd = address << 16;
2589 nv_cmd |= NV_READ_OP;
2590
2591 data = le16_to_cpu(qla1280_nvram_request(ha, nv_cmd));
2592
2593 dprintk(8, "qla1280_get_nvram_word: exiting normally NVRAM data = "
2594 "0x%x", data);
2595
2596 return data;
2597}
2598
2599/*
2600 * NVRAM request
2601 * Sends read command to NVRAM and gets data from NVRAM.
2602 *
2603 * Input:
2604 * ha = adapter block pointer.
2605 * nv_cmd = Bit 26 = start bit
2606 * Bit 25, 24 = opcode
2607 * Bit 23-16 = address
2608 * Bit 15-0 = write data
2609 *
2610 * Returns:
2611 * data word.
2612 */
2613static uint16_t
2614qla1280_nvram_request(struct scsi_qla_host *ha, uint32_t nv_cmd)
2615{
2616 struct device_reg __iomem *reg = ha->iobase;
2617 int cnt;
2618 uint16_t data = 0;
2619 uint16_t reg_data;
2620
2621 /* Send command to NVRAM. */
2622
2623 nv_cmd <<= 5;
2624 for (cnt = 0; cnt < 11; cnt++) {
2625 if (nv_cmd & BIT_31)
2626 qla1280_nv_write(ha, NV_DATA_OUT);
2627 else
2628 qla1280_nv_write(ha, 0);
2629 nv_cmd <<= 1;
2630 }
2631
2632 /* Read data from NVRAM. */
2633
2634 for (cnt = 0; cnt < 16; cnt++) {
2635 WRT_REG_WORD(&reg->nvram, (NV_SELECT | NV_CLOCK));
2636 RD_REG_WORD(&reg->id_l); /* Flush PCI write */
2637 NVRAM_DELAY();
2638 data <<= 1;
2639 reg_data = RD_REG_WORD(&reg->nvram);
2640 if (reg_data & NV_DATA_IN)
2641 data |= BIT_0;
2642 WRT_REG_WORD(&reg->nvram, NV_SELECT);
2643 RD_REG_WORD(&reg->id_l); /* Flush PCI write */
2644 NVRAM_DELAY();
2645 }
2646
2647 /* Deselect chip. */
2648
2649 WRT_REG_WORD(&reg->nvram, NV_DESELECT);
2650 RD_REG_WORD(&reg->id_l); /* Flush PCI write */
2651 NVRAM_DELAY();
2652
2653 return data;
2654}
2655
2656static void
2657qla1280_nv_write(struct scsi_qla_host *ha, uint16_t data)
2658{
2659 struct device_reg __iomem *reg = ha->iobase;
2660
2661 WRT_REG_WORD(&reg->nvram, data | NV_SELECT);
2662 RD_REG_WORD(&reg->id_l); /* Flush PCI write */
2663 NVRAM_DELAY();
2664 WRT_REG_WORD(&reg->nvram, data | NV_SELECT | NV_CLOCK);
2665 RD_REG_WORD(&reg->id_l); /* Flush PCI write */
2666 NVRAM_DELAY();
2667 WRT_REG_WORD(&reg->nvram, data | NV_SELECT);
2668 RD_REG_WORD(&reg->id_l); /* Flush PCI write */
2669 NVRAM_DELAY();
2670}
2671
2672/*
2673 * Mailbox Command
2674 * Issue mailbox command and waits for completion.
2675 *
2676 * Input:
2677 * ha = adapter block pointer.
2678 * mr = mailbox registers to load.
2679 * mb = data pointer for mailbox registers.
2680 *
2681 * Output:
2682 * mb[MAILBOX_REGISTER_COUNT] = returned mailbox data.
2683 *
2684 * Returns:
2685 * 0 = success
2686 */
2687static int
2688qla1280_mailbox_command(struct scsi_qla_host *ha, uint8_t mr, uint16_t *mb)
2689{
2690 struct device_reg __iomem *reg = ha->iobase;
2691#if 0
2692 LIST_HEAD(done_q);
2693#endif
2694 int status = 0;
2695 int cnt;
2696 uint16_t *optr, *iptr;
2697 uint16_t __iomem *mptr;
2698 uint16_t data;
2699 DECLARE_COMPLETION(wait);
2700 struct timer_list timer;
2701
2702 ENTER("qla1280_mailbox_command");
2703
2704 if (ha->mailbox_wait) {
2705 printk(KERN_ERR "Warning mailbox wait already in use!\n");
2706 }
2707 ha->mailbox_wait = &wait;
2708
2709 /*
2710 * We really should start out by verifying that the mailbox is
2711 * available before starting sending the command data
2712 */
2713 /* Load mailbox registers. */
2714 mptr = (uint16_t __iomem *) &reg->mailbox0;
2715 iptr = mb;
2716 for (cnt = 0; cnt < MAILBOX_REGISTER_COUNT; cnt++) {
2717 if (mr & BIT_0) {
2718 WRT_REG_WORD(mptr, (*iptr));
2719 }
2720
2721 mr >>= 1;
2722 mptr++;
2723 iptr++;
2724 }
2725
2726 /* Issue set host interrupt command. */
2727
2728 /* set up a timer just in case we're really jammed */
2729 init_timer(&timer);
2730 timer.expires = jiffies + 20*HZ;
2731 timer.data = (unsigned long)ha;
2732 timer.function = qla1280_mailbox_timeout;
2733 add_timer(&timer);
2734
2735 spin_unlock_irq(HOST_LOCK);
2736 WRT_REG_WORD(&reg->host_cmd, HC_SET_HOST_INT);
2737 data = qla1280_debounce_register(&reg->istatus);
2738
2739 wait_for_completion(&wait);
2740 del_timer_sync(&timer);
2741
2742 spin_lock_irq(HOST_LOCK);
2743
2744 ha->mailbox_wait = NULL;
2745
2746 /* Check for mailbox command timeout. */
2747 if (ha->mailbox_out[0] != MBS_CMD_CMP) {
2748 printk(KERN_WARNING "qla1280_mailbox_command: Command failed, "
2749 "mailbox0 = 0x%04x, mailbox_out0 = 0x%04x, istatus = "
2750 "0x%04x\n",
2751 mb[0], ha->mailbox_out[0], RD_REG_WORD(&reg->istatus));
2752 printk(KERN_WARNING "m0 %04x, m1 %04x, m2 %04x, m3 %04x\n",
2753 RD_REG_WORD(&reg->mailbox0), RD_REG_WORD(&reg->mailbox1),
2754 RD_REG_WORD(&reg->mailbox2), RD_REG_WORD(&reg->mailbox3));
2755 printk(KERN_WARNING "m4 %04x, m5 %04x, m6 %04x, m7 %04x\n",
2756 RD_REG_WORD(&reg->mailbox4), RD_REG_WORD(&reg->mailbox5),
2757 RD_REG_WORD(&reg->mailbox6), RD_REG_WORD(&reg->mailbox7));
2758 status = 1;
2759 }
2760
2761 /* Load return mailbox registers. */
2762 optr = mb;
2763 iptr = (uint16_t *) &ha->mailbox_out[0];
2764 mr = MAILBOX_REGISTER_COUNT;
2765 memcpy(optr, iptr, MAILBOX_REGISTER_COUNT * sizeof(uint16_t));
2766
2767#if 0
2768 /* Go check for any response interrupts pending. */
2769 qla1280_isr(ha, &done_q);
2770#endif
2771
2772 if (ha->flags.reset_marker)
2773 qla1280_rst_aen(ha);
2774
2775#if 0
2776 if (!list_empty(&done_q))
2777 qla1280_done(ha, &done_q);
2778#endif
2779
2780 if (status)
2781 dprintk(2, "qla1280_mailbox_command: **** FAILED, mailbox0 = "
2782 "0x%x ****\n", mb[0]);
2783
2784 LEAVE("qla1280_mailbox_command");
2785 return status;
2786}
2787
2788/*
2789 * qla1280_poll
2790 * Polls ISP for interrupts.
2791 *
2792 * Input:
2793 * ha = adapter block pointer.
2794 */
2795static void
2796qla1280_poll(struct scsi_qla_host *ha)
2797{
2798 struct device_reg __iomem *reg = ha->iobase;
2799 uint16_t data;
2800 LIST_HEAD(done_q);
2801
2802 /* ENTER("qla1280_poll"); */
2803
2804 /* Check for pending interrupts. */
2805 data = RD_REG_WORD(&reg->istatus);
2806 if (data & RISC_INT)
2807 qla1280_isr(ha, &done_q);
2808
2809 if (!ha->mailbox_wait) {
2810 if (ha->flags.reset_marker)
2811 qla1280_rst_aen(ha);
2812 }
2813
2814 if (!list_empty(&done_q))
2815 qla1280_done(ha);
2816
2817 /* LEAVE("qla1280_poll"); */
2818}
2819
2820/*
2821 * qla1280_bus_reset
2822 * Issue SCSI bus reset.
2823 *
2824 * Input:
2825 * ha = adapter block pointer.
2826 * bus = SCSI bus number.
2827 *
2828 * Returns:
2829 * 0 = success
2830 */
2831static int
2832qla1280_bus_reset(struct scsi_qla_host *ha, int bus)
2833{
2834 uint16_t mb[MAILBOX_REGISTER_COUNT];
2835 uint16_t reset_delay;
2836 int status;
2837
2838 dprintk(3, "qla1280_bus_reset: entered\n");
2839
2840 if (qla1280_verbose)
2841 printk(KERN_INFO "scsi(%li:%i): Resetting SCSI BUS\n",
2842 ha->host_no, bus);
2843
2844 reset_delay = ha->bus_settings[bus].bus_reset_delay;
2845 mb[0] = MBC_BUS_RESET;
2846 mb[1] = reset_delay;
2847 mb[2] = (uint16_t) bus;
2848 status = qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]);
2849
2850 if (status) {
2851 if (ha->bus_settings[bus].failed_reset_count > 2)
2852 ha->bus_settings[bus].scsi_bus_dead = 1;
2853 ha->bus_settings[bus].failed_reset_count++;
2854 } else {
2855 spin_unlock_irq(HOST_LOCK);
Nishanth Aravamudan117e4b22005-06-20 23:55:07 +02002856 ssleep(reset_delay);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002857 spin_lock_irq(HOST_LOCK);
2858
2859 ha->bus_settings[bus].scsi_bus_dead = 0;
2860 ha->bus_settings[bus].failed_reset_count = 0;
2861 ha->bus_settings[bus].reset_marker = 0;
2862 /* Issue marker command. */
2863 qla1280_marker(ha, bus, 0, 0, MK_SYNC_ALL);
2864 }
2865
2866 /*
2867 * We should probably call qla1280_set_target_parameters()
2868 * here as well for all devices on the bus.
2869 */
2870
2871 if (status)
2872 dprintk(2, "qla1280_bus_reset: **** FAILED ****\n");
2873 else
2874 dprintk(3, "qla1280_bus_reset: exiting normally\n");
2875
2876 return status;
2877}
2878
2879/*
2880 * qla1280_device_reset
2881 * Issue bus device reset message to the target.
2882 *
2883 * Input:
2884 * ha = adapter block pointer.
2885 * bus = SCSI BUS number.
2886 * target = SCSI ID.
2887 *
2888 * Returns:
2889 * 0 = success
2890 */
2891static int
2892qla1280_device_reset(struct scsi_qla_host *ha, int bus, int target)
2893{
2894 uint16_t mb[MAILBOX_REGISTER_COUNT];
2895 int status;
2896
2897 ENTER("qla1280_device_reset");
2898
2899 mb[0] = MBC_ABORT_TARGET;
2900 mb[1] = (bus ? (target | BIT_7) : target) << 8;
2901 mb[2] = 1;
2902 status = qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]);
2903
2904 /* Issue marker command. */
2905 qla1280_marker(ha, bus, target, 0, MK_SYNC_ID);
2906
2907 if (status)
2908 dprintk(2, "qla1280_device_reset: **** FAILED ****\n");
2909
2910 LEAVE("qla1280_device_reset");
2911 return status;
2912}
2913
2914/*
2915 * qla1280_abort_device
2916 * Issue an abort message to the device
2917 *
2918 * Input:
2919 * ha = adapter block pointer.
2920 * bus = SCSI BUS.
2921 * target = SCSI ID.
2922 * lun = SCSI LUN.
2923 *
2924 * Returns:
2925 * 0 = success
2926 */
2927static int
2928qla1280_abort_device(struct scsi_qla_host *ha, int bus, int target, int lun)
2929{
2930 uint16_t mb[MAILBOX_REGISTER_COUNT];
2931 int status;
2932
2933 ENTER("qla1280_abort_device");
2934
2935 mb[0] = MBC_ABORT_DEVICE;
2936 mb[1] = (bus ? target | BIT_7 : target) << 8 | lun;
2937 status = qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);
2938
2939 /* Issue marker command. */
2940 qla1280_marker(ha, bus, target, lun, MK_SYNC_ID_LUN);
2941
2942 if (status)
2943 dprintk(2, "qla1280_abort_device: **** FAILED ****\n");
2944
2945 LEAVE("qla1280_abort_device");
2946 return status;
2947}
2948
2949/*
2950 * qla1280_abort_command
2951 * Abort command aborts a specified IOCB.
2952 *
2953 * Input:
2954 * ha = adapter block pointer.
2955 * sp = SB structure pointer.
2956 *
2957 * Returns:
2958 * 0 = success
2959 */
2960static int
2961qla1280_abort_command(struct scsi_qla_host *ha, struct srb * sp, int handle)
2962{
2963 uint16_t mb[MAILBOX_REGISTER_COUNT];
2964 unsigned int bus, target, lun;
2965 int status;
2966
2967 ENTER("qla1280_abort_command");
2968
2969 bus = SCSI_BUS_32(sp->cmd);
2970 target = SCSI_TCN_32(sp->cmd);
2971 lun = SCSI_LUN_32(sp->cmd);
2972
2973 sp->flags |= SRB_ABORT_PENDING;
2974
2975 mb[0] = MBC_ABORT_COMMAND;
2976 mb[1] = (bus ? target | BIT_7 : target) << 8 | lun;
2977 mb[2] = handle >> 16;
2978 mb[3] = handle & 0xffff;
2979 status = qla1280_mailbox_command(ha, 0x0f, &mb[0]);
2980
2981 if (status) {
2982 dprintk(2, "qla1280_abort_command: **** FAILED ****\n");
2983 sp->flags &= ~SRB_ABORT_PENDING;
2984 }
2985
2986
2987 LEAVE("qla1280_abort_command");
2988 return status;
2989}
2990
2991/*
2992 * qla1280_reset_adapter
2993 * Reset adapter.
2994 *
2995 * Input:
2996 * ha = adapter block pointer.
2997 */
2998static void
2999qla1280_reset_adapter(struct scsi_qla_host *ha)
3000{
3001 struct device_reg __iomem *reg = ha->iobase;
3002
3003 ENTER("qla1280_reset_adapter");
3004
3005 /* Disable ISP chip */
3006 ha->flags.online = 0;
3007 WRT_REG_WORD(&reg->ictrl, ISP_RESET);
3008 WRT_REG_WORD(&reg->host_cmd,
3009 HC_RESET_RISC | HC_RELEASE_RISC | HC_DISABLE_BIOS);
3010 RD_REG_WORD(&reg->id_l); /* Flush PCI write */
3011
3012 LEAVE("qla1280_reset_adapter");
3013}
3014
3015/*
3016 * Issue marker command.
3017 * Function issues marker IOCB.
3018 *
3019 * Input:
3020 * ha = adapter block pointer.
3021 * bus = SCSI BUS number
3022 * id = SCSI ID
3023 * lun = SCSI LUN
3024 * type = marker modifier
3025 */
3026static void
3027qla1280_marker(struct scsi_qla_host *ha, int bus, int id, int lun, u8 type)
3028{
3029 struct mrk_entry *pkt;
3030
3031 ENTER("qla1280_marker");
3032
3033 /* Get request packet. */
3034 if ((pkt = (struct mrk_entry *) qla1280_req_pkt(ha))) {
3035 pkt->entry_type = MARKER_TYPE;
3036 pkt->lun = (uint8_t) lun;
3037 pkt->target = (uint8_t) (bus ? (id | BIT_7) : id);
3038 pkt->modifier = type;
3039 pkt->entry_status = 0;
3040
3041 /* Issue command to ISP */
3042 qla1280_isp_cmd(ha);
3043 }
3044
3045 LEAVE("qla1280_marker");
3046}
3047
3048
3049/*
3050 * qla1280_64bit_start_scsi
3051 * The start SCSI is responsible for building request packets on
3052 * request ring and modifying ISP input pointer.
3053 *
3054 * Input:
3055 * ha = adapter block pointer.
3056 * sp = SB structure pointer.
3057 *
3058 * Returns:
3059 * 0 = success, was able to issue command.
3060 */
3061#ifdef QLA_64BIT_PTR
3062static int
3063qla1280_64bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp)
3064{
3065 struct device_reg __iomem *reg = ha->iobase;
3066 struct scsi_cmnd *cmd = sp->cmd;
3067 cmd_a64_entry_t *pkt;
3068 struct scatterlist *sg = NULL;
3069 u32 *dword_ptr;
3070 dma_addr_t dma_handle;
3071 int status = 0;
3072 int cnt;
3073 int req_cnt;
3074 u16 seg_cnt;
3075 u8 dir;
3076
3077 ENTER("qla1280_64bit_start_scsi:");
3078
3079 /* Calculate number of entries and segments required. */
3080 req_cnt = 1;
3081 if (cmd->use_sg) {
3082 sg = (struct scatterlist *) cmd->request_buffer;
3083 seg_cnt = pci_map_sg(ha->pdev, sg, cmd->use_sg,
3084 cmd->sc_data_direction);
3085
3086 if (seg_cnt > 2) {
3087 req_cnt += (seg_cnt - 2) / 5;
3088 if ((seg_cnt - 2) % 5)
3089 req_cnt++;
3090 }
3091 } else if (cmd->request_bufflen) { /* If data transfer. */
3092 seg_cnt = 1;
3093 } else {
3094 seg_cnt = 0;
3095 }
3096
3097 if ((req_cnt + 2) >= ha->req_q_cnt) {
3098 /* Calculate number of free request entries. */
3099 cnt = RD_REG_WORD(&reg->mailbox4);
3100 if (ha->req_ring_index < cnt)
3101 ha->req_q_cnt = cnt - ha->req_ring_index;
3102 else
3103 ha->req_q_cnt =
3104 REQUEST_ENTRY_CNT - (ha->req_ring_index - cnt);
3105 }
3106
3107 /* If room for request in request ring. */
3108 if ((req_cnt + 2) >= ha->req_q_cnt) {
3109 status = 1;
3110 dprintk(2, "qla1280_64bit_start_scsi: in-ptr=0x%x req_q_cnt="
3111 "0x%xreq_cnt=0x%x", ha->req_ring_index, ha->req_q_cnt,
3112 req_cnt);
3113 goto out;
3114 }
3115
3116 /* Check for room in outstanding command list. */
3117 for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS &&
3118 ha->outstanding_cmds[cnt] != 0; cnt++);
3119
3120 if (cnt >= MAX_OUTSTANDING_COMMANDS) {
3121 status = 1;
3122 dprintk(2, "qla1280_64bit_start_scsi: NO ROOM IN "
3123 "OUTSTANDING ARRAY, req_q_cnt=0x%x", ha->req_q_cnt);
3124 goto out;
3125 }
3126
3127 ha->outstanding_cmds[cnt] = sp;
3128 ha->req_q_cnt -= req_cnt;
3129 CMD_HANDLE(sp->cmd) = (unsigned char *)(unsigned long)(cnt + 1);
3130
3131 dprintk(2, "64bit_start: cmd=%p sp=%p CDB=%xm, handle %lx\n", cmd, sp,
3132 cmd->cmnd[0], (long)CMD_HANDLE(sp->cmd));
3133 dprintk(2, " bus %i, target %i, lun %i\n",
3134 SCSI_BUS_32(cmd), SCSI_TCN_32(cmd), SCSI_LUN_32(cmd));
3135 qla1280_dump_buffer(2, cmd->cmnd, MAX_COMMAND_SIZE);
3136
3137 /*
3138 * Build command packet.
3139 */
3140 pkt = (cmd_a64_entry_t *) ha->request_ring_ptr;
3141
3142 pkt->entry_type = COMMAND_A64_TYPE;
3143 pkt->entry_count = (uint8_t) req_cnt;
3144 pkt->sys_define = (uint8_t) ha->req_ring_index;
3145 pkt->entry_status = 0;
3146 pkt->handle = cpu_to_le32(cnt);
3147
3148 /* Zero out remaining portion of packet. */
3149 memset(((char *)pkt + 8), 0, (REQUEST_ENTRY_SIZE - 8));
3150
3151 /* Set ISP command timeout. */
3152 pkt->timeout = cpu_to_le16(30);
3153
3154 /* Set device target ID and LUN */
3155 pkt->lun = SCSI_LUN_32(cmd);
3156 pkt->target = SCSI_BUS_32(cmd) ?
3157 (SCSI_TCN_32(cmd) | BIT_7) : SCSI_TCN_32(cmd);
3158
3159 /* Enable simple tag queuing if device supports it. */
3160 if (DEV_SIMPLE_TAGS(cmd->device))
3161 pkt->control_flags |= cpu_to_le16(BIT_3);
3162
3163 /* Load SCSI command packet. */
3164 pkt->cdb_len = cpu_to_le16(CMD_CDBLEN(cmd));
3165 memcpy(pkt->scsi_cdb, &(CMD_CDBP(cmd)), CMD_CDBLEN(cmd));
3166 /* dprintk(1, "Build packet for command[0]=0x%x\n",pkt->scsi_cdb[0]); */
3167
3168 /* Set transfer direction. */
3169 dir = qla1280_data_direction(cmd);
3170 pkt->control_flags |= cpu_to_le16(dir);
3171
3172 /* Set total data segment count. */
3173 pkt->dseg_count = cpu_to_le16(seg_cnt);
3174
3175 /*
3176 * Load data segments.
3177 */
3178 if (seg_cnt) { /* If data transfer. */
3179 /* Setup packet address segment pointer. */
3180 dword_ptr = (u32 *)&pkt->dseg_0_address;
3181
3182 if (cmd->use_sg) { /* If scatter gather */
3183 /* Load command entry data segments. */
3184 for (cnt = 0; cnt < 2 && seg_cnt; cnt++, seg_cnt--) {
3185 dma_handle = sg_dma_address(sg);
3186#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2)
3187 if (ha->flags.use_pci_vchannel)
3188 sn_pci_set_vchan(ha->pdev,
3189 (unsigned long *)&dma_handle,
3190 SCSI_BUS_32(cmd));
3191#endif
3192 *dword_ptr++ =
3193 cpu_to_le32(pci_dma_lo32(dma_handle));
3194 *dword_ptr++ =
3195 cpu_to_le32(pci_dma_hi32(dma_handle));
3196 *dword_ptr++ = cpu_to_le32(sg_dma_len(sg));
3197 sg++;
3198 dprintk(3, "S/G Segment phys_addr=%x %x, len=0x%x\n",
3199 cpu_to_le32(pci_dma_hi32(dma_handle)),
3200 cpu_to_le32(pci_dma_lo32(dma_handle)),
3201 cpu_to_le32(sg_dma_len(sg)));
3202 }
3203 dprintk(5, "qla1280_64bit_start_scsi: Scatter/gather "
3204 "command packet data - b %i, t %i, l %i \n",
3205 SCSI_BUS_32(cmd), SCSI_TCN_32(cmd),
3206 SCSI_LUN_32(cmd));
3207 qla1280_dump_buffer(5, (char *)pkt,
3208 REQUEST_ENTRY_SIZE);
3209
3210 /*
3211 * Build continuation packets.
3212 */
3213 dprintk(3, "S/G Building Continuation...seg_cnt=0x%x "
3214 "remains\n", seg_cnt);
3215
3216 while (seg_cnt > 0) {
3217 /* Adjust ring index. */
3218 ha->req_ring_index++;
3219 if (ha->req_ring_index == REQUEST_ENTRY_CNT) {
3220 ha->req_ring_index = 0;
3221 ha->request_ring_ptr =
3222 ha->request_ring;
3223 } else
3224 ha->request_ring_ptr++;
3225
3226 pkt = (cmd_a64_entry_t *)ha->request_ring_ptr;
3227
3228 /* Zero out packet. */
3229 memset(pkt, 0, REQUEST_ENTRY_SIZE);
3230
3231 /* Load packet defaults. */
3232 ((struct cont_a64_entry *) pkt)->entry_type =
3233 CONTINUE_A64_TYPE;
3234 ((struct cont_a64_entry *) pkt)->entry_count = 1;
3235 ((struct cont_a64_entry *) pkt)->sys_define =
3236 (uint8_t)ha->req_ring_index;
3237 /* Setup packet address segment pointer. */
3238 dword_ptr =
3239 (u32 *)&((struct cont_a64_entry *) pkt)->dseg_0_address;
3240
3241 /* Load continuation entry data segments. */
3242 for (cnt = 0; cnt < 5 && seg_cnt;
3243 cnt++, seg_cnt--) {
3244 dma_handle = sg_dma_address(sg);
3245#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2)
3246 if (ha->flags.use_pci_vchannel)
3247 sn_pci_set_vchan(ha->pdev,
3248 (unsigned long *)&dma_handle,
3249 SCSI_BUS_32(cmd));
3250#endif
3251 *dword_ptr++ =
3252 cpu_to_le32(pci_dma_lo32(dma_handle));
3253 *dword_ptr++ =
3254 cpu_to_le32(pci_dma_hi32(dma_handle));
3255 *dword_ptr++ =
3256 cpu_to_le32(sg_dma_len(sg));
3257 dprintk(3, "S/G Segment Cont. phys_addr=%x %x, len=0x%x\n",
3258 cpu_to_le32(pci_dma_hi32(dma_handle)),
3259 cpu_to_le32(pci_dma_lo32(dma_handle)),
3260 cpu_to_le32(sg_dma_len(sg)));
3261 sg++;
3262 }
3263 dprintk(5, "qla1280_64bit_start_scsi: "
3264 "continuation packet data - b %i, t "
3265 "%i, l %i \n", SCSI_BUS_32(cmd),
3266 SCSI_TCN_32(cmd), SCSI_LUN_32(cmd));
3267 qla1280_dump_buffer(5, (char *)pkt,
3268 REQUEST_ENTRY_SIZE);
3269 }
3270 } else { /* No scatter gather data transfer */
3271 dma_handle = pci_map_single(ha->pdev,
3272 cmd->request_buffer,
3273 cmd->request_bufflen,
3274 cmd->sc_data_direction);
3275
3276 sp->saved_dma_handle = dma_handle;
3277#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2)
3278 if (ha->flags.use_pci_vchannel)
3279 sn_pci_set_vchan(ha->pdev,
3280 (unsigned long *)&dma_handle,
3281 SCSI_BUS_32(cmd));
3282#endif
3283 *dword_ptr++ = cpu_to_le32(pci_dma_lo32(dma_handle));
3284 *dword_ptr++ = cpu_to_le32(pci_dma_hi32(dma_handle));
3285 *dword_ptr = cpu_to_le32(cmd->request_bufflen);
3286
3287 dprintk(5, "qla1280_64bit_start_scsi: No scatter/"
3288 "gather command packet data - b %i, t %i, "
3289 "l %i \n", SCSI_BUS_32(cmd), SCSI_TCN_32(cmd),
3290 SCSI_LUN_32(cmd));
3291 qla1280_dump_buffer(5, (char *)pkt,
3292 REQUEST_ENTRY_SIZE);
3293 }
3294 } else { /* No data transfer */
3295 dprintk(5, "qla1280_64bit_start_scsi: No data, command "
3296 "packet data - b %i, t %i, l %i \n",
3297 SCSI_BUS_32(cmd), SCSI_TCN_32(cmd), SCSI_LUN_32(cmd));
3298 qla1280_dump_buffer(5, (char *)pkt, REQUEST_ENTRY_SIZE);
3299 }
3300 /* Adjust ring index. */
3301 ha->req_ring_index++;
3302 if (ha->req_ring_index == REQUEST_ENTRY_CNT) {
3303 ha->req_ring_index = 0;
3304 ha->request_ring_ptr = ha->request_ring;
3305 } else
3306 ha->request_ring_ptr++;
3307
3308 /* Set chip new ring index. */
3309 dprintk(2,
3310 "qla1280_64bit_start_scsi: Wakeup RISC for pending command\n");
3311 sp->flags |= SRB_SENT;
3312 ha->actthreads++;
3313 WRT_REG_WORD(&reg->mailbox4, ha->req_ring_index);
3314 /* Enforce mmio write ordering; see comment in qla1280_isp_cmd(). */
3315 mmiowb();
3316
3317 out:
3318 if (status)
3319 dprintk(2, "qla1280_64bit_start_scsi: **** FAILED ****\n");
3320 else
3321 dprintk(3, "qla1280_64bit_start_scsi: exiting normally\n");
3322
3323 return status;
3324}
3325#else /* !QLA_64BIT_PTR */
3326
3327/*
3328 * qla1280_32bit_start_scsi
3329 * The start SCSI is responsible for building request packets on
3330 * request ring and modifying ISP input pointer.
3331 *
3332 * The Qlogic firmware interface allows every queue slot to have a SCSI
3333 * command and up to 4 scatter/gather (SG) entries. If we need more
3334 * than 4 SG entries, then continuation entries are used that can
3335 * hold another 7 entries each. The start routine determines if there
3336 * is eought empty slots then build the combination of requests to
3337 * fulfill the OS request.
3338 *
3339 * Input:
3340 * ha = adapter block pointer.
3341 * sp = SCSI Request Block structure pointer.
3342 *
3343 * Returns:
3344 * 0 = success, was able to issue command.
3345 */
3346static int
3347qla1280_32bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp)
3348{
3349 struct device_reg __iomem *reg = ha->iobase;
3350 struct scsi_cmnd *cmd = sp->cmd;
3351 struct cmd_entry *pkt;
3352 struct scatterlist *sg = NULL;
3353 uint32_t *dword_ptr;
3354 int status = 0;
3355 int cnt;
3356 int req_cnt;
3357 uint16_t seg_cnt;
3358 dma_addr_t dma_handle;
3359 u8 dir;
3360
3361 ENTER("qla1280_32bit_start_scsi");
3362
3363 dprintk(1, "32bit_start: cmd=%p sp=%p CDB=%x\n", cmd, sp,
3364 cmd->cmnd[0]);
3365
3366 /* Calculate number of entries and segments required. */
3367 req_cnt = 1;
3368 if (cmd->use_sg) {
3369 /*
3370 * We must build an SG list in adapter format, as the kernel's
3371 * SG list cannot be used directly because of data field size
3372 * (__alpha__) differences and the kernel SG list uses virtual
3373 * addresses where we need physical addresses.
3374 */
3375 sg = (struct scatterlist *) cmd->request_buffer;
3376 seg_cnt = pci_map_sg(ha->pdev, sg, cmd->use_sg,
3377 cmd->sc_data_direction);
3378
3379 /*
3380 * if greater than four sg entries then we need to allocate
3381 * continuation entries
3382 */
3383 if (seg_cnt > 4) {
3384 req_cnt += (seg_cnt - 4) / 7;
3385 if ((seg_cnt - 4) % 7)
3386 req_cnt++;
3387 }
3388 dprintk(3, "S/G Transfer cmd=%p seg_cnt=0x%x, req_cnt=%x\n",
3389 cmd, seg_cnt, req_cnt);
3390 } else if (cmd->request_bufflen) { /* If data transfer. */
3391 dprintk(3, "No S/G transfer t=%x cmd=%p len=%x CDB=%x\n",
3392 SCSI_TCN_32(cmd), cmd, cmd->request_bufflen,
3393 cmd->cmnd[0]);
3394 seg_cnt = 1;
3395 } else {
3396 /* dprintk(1, "No data transfer \n"); */
3397 seg_cnt = 0;
3398 }
3399
3400 if ((req_cnt + 2) >= ha->req_q_cnt) {
3401 /* Calculate number of free request entries. */
3402 cnt = RD_REG_WORD(&reg->mailbox4);
3403 if (ha->req_ring_index < cnt)
3404 ha->req_q_cnt = cnt - ha->req_ring_index;
3405 else
3406 ha->req_q_cnt =
3407 REQUEST_ENTRY_CNT - (ha->req_ring_index - cnt);
3408 }
3409
3410 dprintk(3, "Number of free entries=(%d) seg_cnt=0x%x\n",
3411 ha->req_q_cnt, seg_cnt);
3412 /* If room for request in request ring. */
3413 if ((req_cnt + 2) >= ha->req_q_cnt) {
3414 status = 1;
3415 dprintk(2, "qla1280_32bit_start_scsi: in-ptr=0x%x, "
3416 "req_q_cnt=0x%x, req_cnt=0x%x", ha->req_ring_index,
3417 ha->req_q_cnt, req_cnt);
3418 goto out;
3419 }
3420
3421 /* Check for empty slot in outstanding command list. */
3422 for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS &&
3423 (ha->outstanding_cmds[cnt] != 0); cnt++) ;
3424
3425 if (cnt >= MAX_OUTSTANDING_COMMANDS) {
3426 status = 1;
3427 dprintk(2, "qla1280_32bit_start_scsi: NO ROOM IN OUTSTANDING "
3428 "ARRAY, req_q_cnt=0x%x\n", ha->req_q_cnt);
3429 goto out;
3430 }
3431
3432 CMD_HANDLE(sp->cmd) = (unsigned char *) (unsigned long)(cnt + 1);
3433 ha->outstanding_cmds[cnt] = sp;
3434 ha->req_q_cnt -= req_cnt;
3435
3436 /*
3437 * Build command packet.
3438 */
3439 pkt = (struct cmd_entry *) ha->request_ring_ptr;
3440
3441 pkt->entry_type = COMMAND_TYPE;
3442 pkt->entry_count = (uint8_t) req_cnt;
3443 pkt->sys_define = (uint8_t) ha->req_ring_index;
3444 pkt->entry_status = 0;
3445 pkt->handle = cpu_to_le32(cnt);
3446
3447 /* Zero out remaining portion of packet. */
3448 memset(((char *)pkt + 8), 0, (REQUEST_ENTRY_SIZE - 8));
3449
3450 /* Set ISP command timeout. */
3451 pkt->timeout = cpu_to_le16(30);
3452
3453 /* Set device target ID and LUN */
3454 pkt->lun = SCSI_LUN_32(cmd);
3455 pkt->target = SCSI_BUS_32(cmd) ?
3456 (SCSI_TCN_32(cmd) | BIT_7) : SCSI_TCN_32(cmd);
3457
3458 /* Enable simple tag queuing if device supports it. */
3459 if (DEV_SIMPLE_TAGS(cmd->device))
3460 pkt->control_flags |= cpu_to_le16(BIT_3);
3461
3462 /* Load SCSI command packet. */
3463 pkt->cdb_len = cpu_to_le16(CMD_CDBLEN(cmd));
3464 memcpy(pkt->scsi_cdb, &(CMD_CDBP(cmd)), CMD_CDBLEN(cmd));
3465
3466 /*dprintk(1, "Build packet for command[0]=0x%x\n",pkt->scsi_cdb[0]); */
3467 /* Set transfer direction. */
3468 dir = qla1280_data_direction(cmd);
3469 pkt->control_flags |= cpu_to_le16(dir);
3470
3471 /* Set total data segment count. */
3472 pkt->dseg_count = cpu_to_le16(seg_cnt);
3473
3474 /*
3475 * Load data segments.
3476 */
3477 if (seg_cnt) {
3478 /* Setup packet address segment pointer. */
3479 dword_ptr = &pkt->dseg_0_address;
3480
3481 if (cmd->use_sg) { /* If scatter gather */
3482 dprintk(3, "Building S/G data segments..\n");
3483 qla1280_dump_buffer(1, (char *)sg, 4 * 16);
3484
3485 /* Load command entry data segments. */
3486 for (cnt = 0; cnt < 4 && seg_cnt; cnt++, seg_cnt--) {
3487 *dword_ptr++ =
3488 cpu_to_le32(pci_dma_lo32(sg_dma_address(sg)));
3489 *dword_ptr++ =
3490 cpu_to_le32(sg_dma_len(sg));
3491 dprintk(3, "S/G Segment phys_addr=0x%lx, len=0x%x\n",
3492 (pci_dma_lo32(sg_dma_address(sg))),
3493 (sg_dma_len(sg)));
3494 sg++;
3495 }
3496 /*
3497 * Build continuation packets.
3498 */
3499 dprintk(3, "S/G Building Continuation"
3500 "...seg_cnt=0x%x remains\n", seg_cnt);
3501 while (seg_cnt > 0) {
3502 /* Adjust ring index. */
3503 ha->req_ring_index++;
3504 if (ha->req_ring_index == REQUEST_ENTRY_CNT) {
3505 ha->req_ring_index = 0;
3506 ha->request_ring_ptr =
3507 ha->request_ring;
3508 } else
3509 ha->request_ring_ptr++;
3510
3511 pkt = (struct cmd_entry *)ha->request_ring_ptr;
3512
3513 /* Zero out packet. */
3514 memset(pkt, 0, REQUEST_ENTRY_SIZE);
3515
3516 /* Load packet defaults. */
3517 ((struct cont_entry *) pkt)->
3518 entry_type = CONTINUE_TYPE;
3519 ((struct cont_entry *) pkt)->entry_count = 1;
3520
3521 ((struct cont_entry *) pkt)->sys_define =
3522 (uint8_t) ha->req_ring_index;
3523
3524 /* Setup packet address segment pointer. */
3525 dword_ptr =
3526 &((struct cont_entry *) pkt)->dseg_0_address;
3527
3528 /* Load continuation entry data segments. */
3529 for (cnt = 0; cnt < 7 && seg_cnt;
3530 cnt++, seg_cnt--) {
3531 *dword_ptr++ =
3532 cpu_to_le32(pci_dma_lo32(sg_dma_address(sg)));
3533 *dword_ptr++ =
3534 cpu_to_le32(sg_dma_len(sg));
3535 dprintk(1,
3536 "S/G Segment Cont. phys_addr=0x%x, "
3537 "len=0x%x\n",
3538 cpu_to_le32(pci_dma_lo32(sg_dma_address(sg))),
3539 cpu_to_le32(sg_dma_len(sg)));
3540 sg++;
3541 }
3542 dprintk(5, "qla1280_32bit_start_scsi: "
3543 "continuation packet data - "
3544 "scsi(%i:%i:%i)\n", SCSI_BUS_32(cmd),
3545 SCSI_TCN_32(cmd), SCSI_LUN_32(cmd));
3546 qla1280_dump_buffer(5, (char *)pkt,
3547 REQUEST_ENTRY_SIZE);
3548 }
3549 } else { /* No S/G data transfer */
3550 dma_handle = pci_map_single(ha->pdev,
3551 cmd->request_buffer,
3552 cmd->request_bufflen,
3553 cmd->sc_data_direction);
3554 sp->saved_dma_handle = dma_handle;
3555
3556 *dword_ptr++ = cpu_to_le32(pci_dma_lo32(dma_handle));
3557 *dword_ptr = cpu_to_le32(cmd->request_bufflen);
3558 }
3559 } else { /* No data transfer at all */
3560 dprintk(5, "qla1280_32bit_start_scsi: No data, command "
3561 "packet data - \n");
3562 qla1280_dump_buffer(5, (char *)pkt, REQUEST_ENTRY_SIZE);
3563 }
3564 dprintk(5, "qla1280_32bit_start_scsi: First IOCB block:\n");
3565 qla1280_dump_buffer(5, (char *)ha->request_ring_ptr,
3566 REQUEST_ENTRY_SIZE);
3567
3568 /* Adjust ring index. */
3569 ha->req_ring_index++;
3570 if (ha->req_ring_index == REQUEST_ENTRY_CNT) {
3571 ha->req_ring_index = 0;
3572 ha->request_ring_ptr = ha->request_ring;
3573 } else
3574 ha->request_ring_ptr++;
3575
3576 /* Set chip new ring index. */
3577 dprintk(2, "qla1280_32bit_start_scsi: Wakeup RISC "
3578 "for pending command\n");
3579 sp->flags |= SRB_SENT;
3580 ha->actthreads++;
3581 WRT_REG_WORD(&reg->mailbox4, ha->req_ring_index);
3582 /* Enforce mmio write ordering; see comment in qla1280_isp_cmd(). */
3583 mmiowb();
3584
3585out:
3586 if (status)
3587 dprintk(2, "qla1280_32bit_start_scsi: **** FAILED ****\n");
3588
3589 LEAVE("qla1280_32bit_start_scsi");
3590
3591 return status;
3592}
3593#endif
3594
3595/*
3596 * qla1280_req_pkt
3597 * Function is responsible for locking ring and
3598 * getting a zeroed out request packet.
3599 *
3600 * Input:
3601 * ha = adapter block pointer.
3602 *
3603 * Returns:
3604 * 0 = failed to get slot.
3605 */
3606static request_t *
3607qla1280_req_pkt(struct scsi_qla_host *ha)
3608{
3609 struct device_reg __iomem *reg = ha->iobase;
3610 request_t *pkt = NULL;
3611 int cnt;
3612 uint32_t timer;
3613
3614 ENTER("qla1280_req_pkt");
3615
3616 /*
3617 * This can be called from interrupt context, damn it!!!
3618 */
3619 /* Wait for 30 seconds for slot. */
3620 for (timer = 15000000; timer; timer--) {
3621 if (ha->req_q_cnt > 0) {
3622 /* Calculate number of free request entries. */
3623 cnt = RD_REG_WORD(&reg->mailbox4);
3624 if (ha->req_ring_index < cnt)
3625 ha->req_q_cnt = cnt - ha->req_ring_index;
3626 else
3627 ha->req_q_cnt =
3628 REQUEST_ENTRY_CNT - (ha->req_ring_index - cnt);
3629 }
3630
3631 /* Found empty request ring slot? */
3632 if (ha->req_q_cnt > 0) {
3633 ha->req_q_cnt--;
3634 pkt = ha->request_ring_ptr;
3635
3636 /* Zero out packet. */
3637 memset(pkt, 0, REQUEST_ENTRY_SIZE);
3638
3639 /*
3640 * How can this be right when we have a ring
3641 * size of 512???
3642 */
3643 /* Set system defined field. */
3644 pkt->sys_define = (uint8_t) ha->req_ring_index;
3645
3646 /* Set entry count. */
3647 pkt->entry_count = 1;
3648
3649 break;
3650 }
3651
3652 udelay(2); /* 10 */
3653
3654 /* Check for pending interrupts. */
3655 qla1280_poll(ha);
3656 }
3657
3658 if (!pkt)
3659 dprintk(2, "qla1280_req_pkt: **** FAILED ****\n");
3660 else
3661 dprintk(3, "qla1280_req_pkt: exiting normally\n");
3662
3663 return pkt;
3664}
3665
3666/*
3667 * qla1280_isp_cmd
3668 * Function is responsible for modifying ISP input pointer.
3669 * Releases ring lock.
3670 *
3671 * Input:
3672 * ha = adapter block pointer.
3673 */
3674static void
3675qla1280_isp_cmd(struct scsi_qla_host *ha)
3676{
3677 struct device_reg __iomem *reg = ha->iobase;
3678
3679 ENTER("qla1280_isp_cmd");
3680
3681 dprintk(5, "qla1280_isp_cmd: IOCB data:\n");
3682 qla1280_dump_buffer(5, (char *)ha->request_ring_ptr,
3683 REQUEST_ENTRY_SIZE);
3684
3685 /* Adjust ring index. */
3686 ha->req_ring_index++;
3687 if (ha->req_ring_index == REQUEST_ENTRY_CNT) {
3688 ha->req_ring_index = 0;
3689 ha->request_ring_ptr = ha->request_ring;
3690 } else
3691 ha->request_ring_ptr++;
3692
3693 /*
3694 * Update request index to mailbox4 (Request Queue In).
3695 * The mmiowb() ensures that this write is ordered with writes by other
3696 * CPUs. Without the mmiowb(), it is possible for the following:
3697 * CPUA posts write of index 5 to mailbox4
3698 * CPUA releases host lock
3699 * CPUB acquires host lock
3700 * CPUB posts write of index 6 to mailbox4
3701 * On PCI bus, order reverses and write of 6 posts, then index 5,
3702 * causing chip to issue full queue of stale commands
3703 * The mmiowb() prevents future writes from crossing the barrier.
3704 * See Documentation/DocBook/deviceiobook.tmpl for more information.
3705 */
3706 WRT_REG_WORD(&reg->mailbox4, ha->req_ring_index);
3707 mmiowb();
3708
3709 LEAVE("qla1280_isp_cmd");
3710}
3711
3712/****************************************************************************/
3713/* Interrupt Service Routine. */
3714/****************************************************************************/
3715
3716/****************************************************************************
3717 * qla1280_isr
3718 * Calls I/O done on command completion.
3719 *
3720 * Input:
3721 * ha = adapter block pointer.
3722 * done_q = done queue.
3723 ****************************************************************************/
3724static void
3725qla1280_isr(struct scsi_qla_host *ha, struct list_head *done_q)
3726{
3727 struct device_reg __iomem *reg = ha->iobase;
3728 struct response *pkt;
3729 struct srb *sp = NULL;
3730 uint16_t mailbox[MAILBOX_REGISTER_COUNT];
3731 uint16_t *wptr;
3732 uint32_t index;
3733 u16 istatus;
3734
3735 ENTER("qla1280_isr");
3736
3737 istatus = RD_REG_WORD(&reg->istatus);
3738 if (!(istatus & (RISC_INT | PCI_INT)))
3739 return;
3740
3741 /* Save mailbox register 5 */
3742 mailbox[5] = RD_REG_WORD(&reg->mailbox5);
3743
3744 /* Check for mailbox interrupt. */
3745
3746 mailbox[0] = RD_REG_WORD_dmasync(&reg->semaphore);
3747
3748 if (mailbox[0] & BIT_0) {
3749 /* Get mailbox data. */
3750 /* dprintk(1, "qla1280_isr: In Get mailbox data \n"); */
3751
3752 wptr = &mailbox[0];
3753 *wptr++ = RD_REG_WORD(&reg->mailbox0);
3754 *wptr++ = RD_REG_WORD(&reg->mailbox1);
3755 *wptr = RD_REG_WORD(&reg->mailbox2);
3756 if (mailbox[0] != MBA_SCSI_COMPLETION) {
3757 wptr++;
3758 *wptr++ = RD_REG_WORD(&reg->mailbox3);
3759 *wptr++ = RD_REG_WORD(&reg->mailbox4);
3760 wptr++;
3761 *wptr++ = RD_REG_WORD(&reg->mailbox6);
3762 *wptr = RD_REG_WORD(&reg->mailbox7);
3763 }
3764
3765 /* Release mailbox registers. */
3766
3767 WRT_REG_WORD(&reg->semaphore, 0);
3768 WRT_REG_WORD(&reg->host_cmd, HC_CLR_RISC_INT);
3769
3770 dprintk(5, "qla1280_isr: mailbox interrupt mailbox[0] = 0x%x",
3771 mailbox[0]);
3772
3773 /* Handle asynchronous event */
3774 switch (mailbox[0]) {
3775 case MBA_SCSI_COMPLETION: /* Response completion */
3776 dprintk(5, "qla1280_isr: mailbox SCSI response "
3777 "completion\n");
3778
3779 if (ha->flags.online) {
3780 /* Get outstanding command index. */
3781 index = mailbox[2] << 16 | mailbox[1];
3782
3783 /* Validate handle. */
3784 if (index < MAX_OUTSTANDING_COMMANDS)
3785 sp = ha->outstanding_cmds[index];
3786 else
3787 sp = NULL;
3788
3789 if (sp) {
3790 /* Free outstanding command slot. */
3791 ha->outstanding_cmds[index] = NULL;
3792
3793 /* Save ISP completion status */
3794 CMD_RESULT(sp->cmd) = 0;
3795
3796 /* Place block on done queue */
3797 list_add_tail(&sp->list, done_q);
3798 } else {
3799 /*
3800 * If we get here we have a real problem!
3801 */
3802 printk(KERN_WARNING
3803 "qla1280: ISP invalid handle");
3804 }
3805 }
3806 break;
3807
3808 case MBA_BUS_RESET: /* SCSI Bus Reset */
3809 ha->flags.reset_marker = 1;
3810 index = mailbox[6] & BIT_0;
3811 ha->bus_settings[index].reset_marker = 1;
3812
3813 printk(KERN_DEBUG "qla1280_isr(): index %i "
3814 "asynchronous BUS_RESET\n", index);
3815 break;
3816
3817 case MBA_SYSTEM_ERR: /* System Error */
3818 printk(KERN_WARNING
3819 "qla1280: ISP System Error - mbx1=%xh, mbx2="
3820 "%xh, mbx3=%xh\n", mailbox[1], mailbox[2],
3821 mailbox[3]);
3822 break;
3823
3824 case MBA_REQ_TRANSFER_ERR: /* Request Transfer Error */
3825 printk(KERN_WARNING
3826 "qla1280: ISP Request Transfer Error\n");
3827 break;
3828
3829 case MBA_RSP_TRANSFER_ERR: /* Response Transfer Error */
3830 printk(KERN_WARNING
3831 "qla1280: ISP Response Transfer Error\n");
3832 break;
3833
3834 case MBA_WAKEUP_THRES: /* Request Queue Wake-up */
3835 dprintk(2, "qla1280_isr: asynchronous WAKEUP_THRES\n");
3836 break;
3837
3838 case MBA_TIMEOUT_RESET: /* Execution Timeout Reset */
3839 dprintk(2,
3840 "qla1280_isr: asynchronous TIMEOUT_RESET\n");
3841 break;
3842
3843 case MBA_DEVICE_RESET: /* Bus Device Reset */
3844 printk(KERN_INFO "qla1280_isr(): asynchronous "
3845 "BUS_DEVICE_RESET\n");
3846
3847 ha->flags.reset_marker = 1;
3848 index = mailbox[6] & BIT_0;
3849 ha->bus_settings[index].reset_marker = 1;
3850 break;
3851
3852 case MBA_BUS_MODE_CHANGE:
3853 dprintk(2,
3854 "qla1280_isr: asynchronous BUS_MODE_CHANGE\n");
3855 break;
3856
3857 default:
3858 /* dprintk(1, "qla1280_isr: default case of switch MB \n"); */
3859 if (mailbox[0] < MBA_ASYNC_EVENT) {
3860 wptr = &mailbox[0];
3861 memcpy((uint16_t *) ha->mailbox_out, wptr,
3862 MAILBOX_REGISTER_COUNT *
3863 sizeof(uint16_t));
3864
3865 if(ha->mailbox_wait != NULL)
3866 complete(ha->mailbox_wait);
3867 }
3868 break;
3869 }
3870 } else {
3871 WRT_REG_WORD(&reg->host_cmd, HC_CLR_RISC_INT);
3872 }
3873
3874 /*
3875 * We will receive interrupts during mailbox testing prior to
3876 * the card being marked online, hence the double check.
3877 */
3878 if (!(ha->flags.online && !ha->mailbox_wait)) {
3879 dprintk(2, "qla1280_isr: Response pointer Error\n");
3880 goto out;
3881 }
3882
3883 if (mailbox[5] >= RESPONSE_ENTRY_CNT)
3884 goto out;
3885
3886 while (ha->rsp_ring_index != mailbox[5]) {
3887 pkt = ha->response_ring_ptr;
3888
3889 dprintk(5, "qla1280_isr: ha->rsp_ring_index = 0x%x, mailbox[5]"
3890 " = 0x%x\n", ha->rsp_ring_index, mailbox[5]);
3891 dprintk(5,"qla1280_isr: response packet data\n");
3892 qla1280_dump_buffer(5, (char *)pkt, RESPONSE_ENTRY_SIZE);
3893
3894 if (pkt->entry_type == STATUS_TYPE) {
3895 if ((le16_to_cpu(pkt->scsi_status) & 0xff)
3896 || pkt->comp_status || pkt->entry_status) {
3897 dprintk(2, "qla1280_isr: ha->rsp_ring_index = "
3898 "0x%x mailbox[5] = 0x%x, comp_status "
3899 "= 0x%x, scsi_status = 0x%x\n",
3900 ha->rsp_ring_index, mailbox[5],
3901 le16_to_cpu(pkt->comp_status),
3902 le16_to_cpu(pkt->scsi_status));
3903 }
3904 } else {
3905 dprintk(2, "qla1280_isr: ha->rsp_ring_index = "
3906 "0x%x, mailbox[5] = 0x%x\n",
3907 ha->rsp_ring_index, mailbox[5]);
3908 dprintk(2, "qla1280_isr: response packet data\n");
3909 qla1280_dump_buffer(2, (char *)pkt,
3910 RESPONSE_ENTRY_SIZE);
3911 }
3912
3913 if (pkt->entry_type == STATUS_TYPE || pkt->entry_status) {
3914 dprintk(2, "status: Cmd %p, handle %i\n",
3915 ha->outstanding_cmds[pkt->handle]->cmd,
3916 pkt->handle);
3917 if (pkt->entry_type == STATUS_TYPE)
3918 qla1280_status_entry(ha, pkt, done_q);
3919 else
3920 qla1280_error_entry(ha, pkt, done_q);
3921 /* Adjust ring index. */
3922 ha->rsp_ring_index++;
3923 if (ha->rsp_ring_index == RESPONSE_ENTRY_CNT) {
3924 ha->rsp_ring_index = 0;
3925 ha->response_ring_ptr = ha->response_ring;
3926 } else
3927 ha->response_ring_ptr++;
3928 WRT_REG_WORD(&reg->mailbox5, ha->rsp_ring_index);
3929 }
3930 }
3931
3932 out:
3933 LEAVE("qla1280_isr");
3934}
3935
3936/*
3937 * qla1280_rst_aen
3938 * Processes asynchronous reset.
3939 *
3940 * Input:
3941 * ha = adapter block pointer.
3942 */
3943static void
3944qla1280_rst_aen(struct scsi_qla_host *ha)
3945{
3946 uint8_t bus;
3947
3948 ENTER("qla1280_rst_aen");
3949
3950 if (ha->flags.online && !ha->flags.reset_active &&
3951 !ha->flags.abort_isp_active) {
3952 ha->flags.reset_active = 1;
3953 while (ha->flags.reset_marker) {
3954 /* Issue marker command. */
3955 ha->flags.reset_marker = 0;
3956 for (bus = 0; bus < ha->ports &&
3957 !ha->flags.reset_marker; bus++) {
3958 if (ha->bus_settings[bus].reset_marker) {
3959 ha->bus_settings[bus].reset_marker = 0;
3960 qla1280_marker(ha, bus, 0, 0,
3961 MK_SYNC_ALL);
3962 }
3963 }
3964 }
3965 }
3966
3967 LEAVE("qla1280_rst_aen");
3968}
3969
3970
3971#if LINUX_VERSION_CODE < 0x020500
3972/*
3973 *
3974 */
3975static void
3976qla1280_get_target_options(struct scsi_cmnd *cmd, struct scsi_qla_host *ha)
3977{
3978 unsigned char *result;
3979 struct nvram *n;
3980 int bus, target, lun;
3981
3982 bus = SCSI_BUS_32(cmd);
3983 target = SCSI_TCN_32(cmd);
3984 lun = SCSI_LUN_32(cmd);
3985
3986 /*
3987 * Make sure to not touch anything if someone is using the
3988 * sg interface.
3989 */
3990 if (cmd->use_sg || (CMD_RESULT(cmd) >> 16) != DID_OK || lun)
3991 return;
3992
3993 result = cmd->request_buffer;
3994 n = &ha->nvram;
3995
3996 n->bus[bus].target[target].parameter.f.enable_wide = 0;
3997 n->bus[bus].target[target].parameter.f.enable_sync = 0;
3998 n->bus[bus].target[target].ppr_1x160.flags.enable_ppr = 0;
3999
4000 if (result[7] & 0x60)
4001 n->bus[bus].target[target].parameter.f.enable_wide = 1;
4002 if (result[7] & 0x10)
4003 n->bus[bus].target[target].parameter.f.enable_sync = 1;
4004 if ((result[2] >= 3) && (result[4] + 5 > 56) &&
4005 (result[56] & 0x4))
4006 n->bus[bus].target[target].ppr_1x160.flags.enable_ppr = 1;
4007
4008 dprintk(2, "get_target_options(): wide %i, sync %i, ppr %i\n",
4009 n->bus[bus].target[target].parameter.f.enable_wide,
4010 n->bus[bus].target[target].parameter.f.enable_sync,
4011 n->bus[bus].target[target].ppr_1x160.flags.enable_ppr);
4012}
4013#endif
4014
4015/*
4016 * qla1280_status_entry
4017 * Processes received ISP status entry.
4018 *
4019 * Input:
4020 * ha = adapter block pointer.
4021 * pkt = entry pointer.
4022 * done_q = done queue.
4023 */
4024static void
4025qla1280_status_entry(struct scsi_qla_host *ha, struct response *pkt,
4026 struct list_head *done_q)
4027{
4028 unsigned int bus, target, lun;
4029 int sense_sz;
4030 struct srb *sp;
4031 struct scsi_cmnd *cmd;
4032 uint32_t handle = le32_to_cpu(pkt->handle);
4033 uint16_t scsi_status = le16_to_cpu(pkt->scsi_status);
4034 uint16_t comp_status = le16_to_cpu(pkt->comp_status);
4035
4036 ENTER("qla1280_status_entry");
4037
4038 /* Validate handle. */
4039 if (handle < MAX_OUTSTANDING_COMMANDS)
4040 sp = ha->outstanding_cmds[handle];
4041 else
4042 sp = NULL;
4043
4044 if (!sp) {
4045 printk(KERN_WARNING "qla1280: Status Entry invalid handle\n");
4046 goto out;
4047 }
4048
4049 /* Free outstanding command slot. */
4050 ha->outstanding_cmds[handle] = NULL;
4051
4052 cmd = sp->cmd;
4053
4054 /* Generate LU queue on cntrl, target, LUN */
4055 bus = SCSI_BUS_32(cmd);
4056 target = SCSI_TCN_32(cmd);
4057 lun = SCSI_LUN_32(cmd);
4058
4059 if (comp_status || scsi_status) {
4060 dprintk(3, "scsi: comp_status = 0x%x, scsi_status = "
4061 "0x%x, handle = 0x%x\n", comp_status,
4062 scsi_status, handle);
4063 }
4064
Jeremy Higdon 7d0e11f2005-05-01 05:18:48 -07004065 /* Target busy or queue full */
4066 if ((scsi_status & 0xFF) == SAM_STAT_TASK_SET_FULL ||
4067 (scsi_status & 0xFF) == SAM_STAT_BUSY) {
4068 CMD_RESULT(cmd) = scsi_status & 0xff;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004069 } else {
4070
4071 /* Save ISP completion status */
4072 CMD_RESULT(cmd) = qla1280_return_status(pkt, cmd);
4073
4074 if (scsi_status & SS_CHECK_CONDITION) {
4075 if (comp_status != CS_ARS_FAILED) {
4076 uint16_t req_sense_length =
4077 le16_to_cpu(pkt->req_sense_length);
4078 if (req_sense_length < CMD_SNSLEN(cmd))
4079 sense_sz = req_sense_length;
4080 else
4081 /*
4082 * scsi_cmnd->sense_buffer is
4083 * 64 bytes, why only copy 63?
4084 * This looks wrong! /Jes
4085 */
4086 sense_sz = CMD_SNSLEN(cmd) - 1;
4087
4088 memcpy(cmd->sense_buffer,
4089 &pkt->req_sense_data, sense_sz);
4090 } else
4091 sense_sz = 0;
4092 memset(cmd->sense_buffer + sense_sz, 0,
4093 sizeof(cmd->sense_buffer) - sense_sz);
4094
4095 dprintk(2, "qla1280_status_entry: Check "
4096 "condition Sense data, b %i, t %i, "
4097 "l %i\n", bus, target, lun);
4098 if (sense_sz)
4099 qla1280_dump_buffer(2,
4100 (char *)cmd->sense_buffer,
4101 sense_sz);
4102 }
4103 }
4104
4105 /* Place command on done queue. */
4106 list_add_tail(&sp->list, done_q);
4107 out:
4108 LEAVE("qla1280_status_entry");
4109}
4110
4111/*
4112 * qla1280_error_entry
4113 * Processes error entry.
4114 *
4115 * Input:
4116 * ha = adapter block pointer.
4117 * pkt = entry pointer.
4118 * done_q = done queue.
4119 */
4120static void
4121qla1280_error_entry(struct scsi_qla_host *ha, struct response *pkt,
4122 struct list_head *done_q)
4123{
4124 struct srb *sp;
4125 uint32_t handle = le32_to_cpu(pkt->handle);
4126
4127 ENTER("qla1280_error_entry");
4128
4129 if (pkt->entry_status & BIT_3)
4130 dprintk(2, "qla1280_error_entry: BAD PAYLOAD flag error\n");
4131 else if (pkt->entry_status & BIT_2)
4132 dprintk(2, "qla1280_error_entry: BAD HEADER flag error\n");
4133 else if (pkt->entry_status & BIT_1)
4134 dprintk(2, "qla1280_error_entry: FULL flag error\n");
4135 else
4136 dprintk(2, "qla1280_error_entry: UNKNOWN flag error\n");
4137
4138 /* Validate handle. */
4139 if (handle < MAX_OUTSTANDING_COMMANDS)
4140 sp = ha->outstanding_cmds[handle];
4141 else
4142 sp = NULL;
4143
4144 if (sp) {
4145 /* Free outstanding command slot. */
4146 ha->outstanding_cmds[handle] = NULL;
4147
4148 /* Bad payload or header */
4149 if (pkt->entry_status & (BIT_3 + BIT_2)) {
4150 /* Bad payload or header, set error status. */
4151 /* CMD_RESULT(sp->cmd) = CS_BAD_PAYLOAD; */
4152 CMD_RESULT(sp->cmd) = DID_ERROR << 16;
4153 } else if (pkt->entry_status & BIT_1) { /* FULL flag */
4154 CMD_RESULT(sp->cmd) = DID_BUS_BUSY << 16;
4155 } else {
4156 /* Set error status. */
4157 CMD_RESULT(sp->cmd) = DID_ERROR << 16;
4158 }
4159
4160 /* Place command on done queue. */
4161 list_add_tail(&sp->list, done_q);
4162 }
4163#ifdef QLA_64BIT_PTR
4164 else if (pkt->entry_type == COMMAND_A64_TYPE) {
4165 printk(KERN_WARNING "!qla1280: Error Entry invalid handle");
4166 }
4167#endif
4168
4169 LEAVE("qla1280_error_entry");
4170}
4171
4172/*
4173 * qla1280_abort_isp
4174 * Resets ISP and aborts all outstanding commands.
4175 *
4176 * Input:
4177 * ha = adapter block pointer.
4178 *
4179 * Returns:
4180 * 0 = success
4181 */
4182static int
4183qla1280_abort_isp(struct scsi_qla_host *ha)
4184{
4185 struct device_reg __iomem *reg = ha->iobase;
4186 struct srb *sp;
4187 int status = 0;
4188 int cnt;
4189 int bus;
4190
4191 ENTER("qla1280_abort_isp");
4192
4193 if (ha->flags.abort_isp_active || !ha->flags.online)
4194 goto out;
4195
4196 ha->flags.abort_isp_active = 1;
4197
4198 /* Disable ISP interrupts. */
4199 qla1280_disable_intrs(ha);
4200 WRT_REG_WORD(&reg->host_cmd, HC_PAUSE_RISC);
4201 RD_REG_WORD(&reg->id_l);
4202
4203 printk(KERN_INFO "scsi(%li): dequeuing outstanding commands\n",
4204 ha->host_no);
4205 /* Dequeue all commands in outstanding command list. */
4206 for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
4207 struct scsi_cmnd *cmd;
4208 sp = ha->outstanding_cmds[cnt];
4209 if (sp) {
4210
4211 cmd = sp->cmd;
4212 CMD_RESULT(cmd) = DID_RESET << 16;
4213
4214 sp->cmd = NULL;
4215 ha->outstanding_cmds[cnt] = NULL;
4216
4217 (*cmd->scsi_done)(cmd);
4218
4219 sp->flags = 0;
4220 }
4221 }
4222
4223 status = qla1280_load_firmware(ha);
4224 if (status)
4225 goto out;
4226
4227 /* Setup adapter based on NVRAM parameters. */
4228 qla1280_nvram_config (ha);
4229
4230 status = qla1280_init_rings(ha);
4231 if (status)
4232 goto out;
4233
4234 /* Issue SCSI reset. */
4235 for (bus = 0; bus < ha->ports; bus++)
4236 qla1280_bus_reset(ha, bus);
4237
4238 ha->flags.abort_isp_active = 0;
4239 out:
4240 if (status) {
4241 printk(KERN_WARNING
4242 "qla1280: ISP error recovery failed, board disabled");
4243 qla1280_reset_adapter(ha);
4244 dprintk(2, "qla1280_abort_isp: **** FAILED ****\n");
4245 }
4246
4247 LEAVE("qla1280_abort_isp");
4248 return status;
4249}
4250
4251
4252/*
4253 * qla1280_debounce_register
4254 * Debounce register.
4255 *
4256 * Input:
4257 * port = register address.
4258 *
4259 * Returns:
4260 * register value.
4261 */
4262static u16
4263qla1280_debounce_register(volatile u16 __iomem * addr)
4264{
4265 volatile u16 ret;
4266 volatile u16 ret2;
4267
4268 ret = RD_REG_WORD(addr);
4269 ret2 = RD_REG_WORD(addr);
4270
4271 if (ret == ret2)
4272 return ret;
4273
4274 do {
4275 cpu_relax();
4276 ret = RD_REG_WORD(addr);
4277 ret2 = RD_REG_WORD(addr);
4278 } while (ret != ret2);
4279
4280 return ret;
4281}
4282
4283
4284/************************************************************************
4285 * qla1280_check_for_dead_scsi_bus *
4286 * *
4287 * This routine checks for a dead SCSI bus *
4288 ************************************************************************/
4289#define SET_SXP_BANK 0x0100
4290#define SCSI_PHASE_INVALID 0x87FF
4291static int
4292qla1280_check_for_dead_scsi_bus(struct scsi_qla_host *ha, unsigned int bus)
4293{
4294 uint16_t config_reg, scsi_control;
4295 struct device_reg __iomem *reg = ha->iobase;
4296
4297 if (ha->bus_settings[bus].scsi_bus_dead) {
4298 WRT_REG_WORD(&reg->host_cmd, HC_PAUSE_RISC);
4299 config_reg = RD_REG_WORD(&reg->cfg_1);
4300 WRT_REG_WORD(&reg->cfg_1, SET_SXP_BANK);
4301 scsi_control = RD_REG_WORD(&reg->scsiControlPins);
4302 WRT_REG_WORD(&reg->cfg_1, config_reg);
4303 WRT_REG_WORD(&reg->host_cmd, HC_RELEASE_RISC);
4304
4305 if (scsi_control == SCSI_PHASE_INVALID) {
4306 ha->bus_settings[bus].scsi_bus_dead = 1;
4307#if 0
4308 CMD_RESULT(cp) = DID_NO_CONNECT << 16;
4309 CMD_HANDLE(cp) = INVALID_HANDLE;
4310 /* ha->actthreads--; */
4311
4312 (*(cp)->scsi_done)(cp);
4313#endif
4314 return 1; /* bus is dead */
4315 } else {
4316 ha->bus_settings[bus].scsi_bus_dead = 0;
4317 ha->bus_settings[bus].failed_reset_count = 0;
4318 }
4319 }
4320 return 0; /* bus is not dead */
4321}
4322
4323static void
4324qla1280_get_target_parameters(struct scsi_qla_host *ha,
4325 struct scsi_device *device)
4326{
4327 uint16_t mb[MAILBOX_REGISTER_COUNT];
4328 int bus, target, lun;
4329
4330 bus = device->channel;
4331 target = device->id;
4332 lun = device->lun;
4333
4334
4335 mb[0] = MBC_GET_TARGET_PARAMETERS;
4336 mb[1] = (uint16_t) (bus ? target | BIT_7 : target);
4337 mb[1] <<= 8;
4338 qla1280_mailbox_command(ha, BIT_6 | BIT_3 | BIT_2 | BIT_1 | BIT_0,
4339 &mb[0]);
4340
4341 printk(KERN_INFO "scsi(%li:%d:%d:%d):", ha->host_no, bus, target, lun);
4342
4343 if (mb[3] != 0) {
4344 printk(" Sync: period %d, offset %d",
4345 (mb[3] & 0xff), (mb[3] >> 8));
4346 if (mb[2] & BIT_13)
4347 printk(", Wide");
4348 if ((mb[2] & BIT_5) && ((mb[6] >> 8) & 0xff) >= 2)
4349 printk(", DT");
4350 } else
4351 printk(" Async");
4352
4353 if (DEV_SIMPLE_TAGS(device))
4354 printk(", Tagged queuing: depth %d", device->queue_depth);
4355 printk("\n");
4356}
4357
4358
4359#if DEBUG_QLA1280
4360static void
4361__qla1280_dump_buffer(char *b, int size)
4362{
4363 int cnt;
4364 u8 c;
4365
4366 printk(KERN_DEBUG " 0 1 2 3 4 5 6 7 8 9 Ah "
4367 "Bh Ch Dh Eh Fh\n");
4368 printk(KERN_DEBUG "---------------------------------------------"
4369 "------------------\n");
4370
4371 for (cnt = 0; cnt < size;) {
4372 c = *b++;
4373
4374 printk("0x%02x", c);
4375 cnt++;
4376 if (!(cnt % 16))
4377 printk("\n");
4378 else
4379 printk(" ");
4380 }
4381 if (cnt % 16)
4382 printk("\n");
4383}
4384
4385/**************************************************************************
4386 * ql1280_print_scsi_cmd
4387 *
4388 **************************************************************************/
4389static void
4390__qla1280_print_scsi_cmd(struct scsi_cmnd *cmd)
4391{
4392 struct scsi_qla_host *ha;
4393 struct Scsi_Host *host = CMD_HOST(cmd);
4394 struct srb *sp;
4395 /* struct scatterlist *sg; */
4396
4397 int i;
4398 ha = (struct scsi_qla_host *)host->hostdata;
4399
4400 sp = (struct srb *)CMD_SP(cmd);
4401 printk("SCSI Command @= 0x%p, Handle=0x%p\n", cmd, CMD_HANDLE(cmd));
4402 printk(" chan=%d, target = 0x%02x, lun = 0x%02x, cmd_len = 0x%02x\n",
4403 SCSI_BUS_32(cmd), SCSI_TCN_32(cmd), SCSI_LUN_32(cmd),
4404 CMD_CDBLEN(cmd));
4405 printk(" CDB = ");
4406 for (i = 0; i < cmd->cmd_len; i++) {
4407 printk("0x%02x ", cmd->cmnd[i]);
4408 }
4409 printk(" seg_cnt =%d\n", cmd->use_sg);
4410 printk(" request buffer=0x%p, request buffer len=0x%x\n",
4411 cmd->request_buffer, cmd->request_bufflen);
4412 /* if (cmd->use_sg)
4413 {
4414 sg = (struct scatterlist *) cmd->request_buffer;
4415 printk(" SG buffer: \n");
4416 qla1280_dump_buffer(1, (char *)sg, (cmd->use_sg*sizeof(struct scatterlist)));
4417 } */
4418 printk(" tag=%d, transfersize=0x%x \n",
4419 cmd->tag, cmd->transfersize);
4420 printk(" Pid=%li, SP=0x%p\n", cmd->pid, CMD_SP(cmd));
4421 printk(" underflow size = 0x%x, direction=0x%x\n",
4422 cmd->underflow, cmd->sc_data_direction);
4423}
4424
4425/**************************************************************************
4426 * ql1280_dump_device
4427 *
4428 **************************************************************************/
4429static void
4430ql1280_dump_device(struct scsi_qla_host *ha)
4431{
4432
4433 struct scsi_cmnd *cp;
4434 struct srb *sp;
4435 int i;
4436
4437 printk(KERN_DEBUG "Outstanding Commands on controller:\n");
4438
4439 for (i = 0; i < MAX_OUTSTANDING_COMMANDS; i++) {
4440 if ((sp = ha->outstanding_cmds[i]) == NULL)
4441 continue;
4442 if ((cp = sp->cmd) == NULL)
4443 continue;
4444 qla1280_print_scsi_cmd(1, cp);
4445 }
4446}
4447#endif
4448
4449
4450enum tokens {
4451 TOKEN_NVRAM,
4452 TOKEN_SYNC,
4453 TOKEN_WIDE,
4454 TOKEN_PPR,
4455 TOKEN_VERBOSE,
4456 TOKEN_DEBUG,
4457};
4458
4459struct setup_tokens {
4460 char *token;
4461 int val;
4462};
4463
4464static struct setup_tokens setup_token[] __initdata =
4465{
4466 { "nvram", TOKEN_NVRAM },
4467 { "sync", TOKEN_SYNC },
4468 { "wide", TOKEN_WIDE },
4469 { "ppr", TOKEN_PPR },
4470 { "verbose", TOKEN_VERBOSE },
4471 { "debug", TOKEN_DEBUG },
4472};
4473
4474
4475/**************************************************************************
4476 * qla1280_setup
4477 *
4478 * Handle boot parameters. This really needs to be changed so one
4479 * can specify per adapter parameters.
4480 **************************************************************************/
4481static int __init
4482qla1280_setup(char *s)
4483{
4484 char *cp, *ptr;
4485 unsigned long val;
4486 int toke;
4487
4488 cp = s;
4489
4490 while (cp && (ptr = strchr(cp, ':'))) {
4491 ptr++;
4492 if (!strcmp(ptr, "yes")) {
4493 val = 0x10000;
4494 ptr += 3;
4495 } else if (!strcmp(ptr, "no")) {
4496 val = 0;
4497 ptr += 2;
4498 } else
4499 val = simple_strtoul(ptr, &ptr, 0);
4500
4501 switch ((toke = qla1280_get_token(cp))) {
4502 case TOKEN_NVRAM:
4503 if (!val)
4504 driver_setup.no_nvram = 1;
4505 break;
4506 case TOKEN_SYNC:
4507 if (!val)
4508 driver_setup.no_sync = 1;
4509 else if (val != 0x10000)
4510 driver_setup.sync_mask = val;
4511 break;
4512 case TOKEN_WIDE:
4513 if (!val)
4514 driver_setup.no_wide = 1;
4515 else if (val != 0x10000)
4516 driver_setup.wide_mask = val;
4517 break;
4518 case TOKEN_PPR:
4519 if (!val)
4520 driver_setup.no_ppr = 1;
4521 else if (val != 0x10000)
4522 driver_setup.ppr_mask = val;
4523 break;
4524 case TOKEN_VERBOSE:
4525 qla1280_verbose = val;
4526 break;
4527 default:
4528 printk(KERN_INFO "qla1280: unknown boot option %s\n",
4529 cp);
4530 }
4531
4532 cp = strchr(ptr, ';');
4533 if (cp)
4534 cp++;
4535 else {
4536 break;
4537 }
4538 }
4539 return 1;
4540}
4541
4542
4543static int
4544qla1280_get_token(char *str)
4545{
4546 char *sep;
4547 long ret = -1;
4548 int i, len;
4549
4550 len = sizeof(setup_token)/sizeof(struct setup_tokens);
4551
4552 sep = strchr(str, ':');
4553
4554 if (sep) {
4555 for (i = 0; i < len; i++){
4556
4557 if (!strncmp(setup_token[i].token, str, (sep - str))) {
4558 ret = setup_token[i].val;
4559 break;
4560 }
4561 }
4562 }
4563
4564 return ret;
4565}
4566
4567#if LINUX_VERSION_CODE >= 0x020600
4568static struct scsi_host_template qla1280_driver_template = {
4569 .module = THIS_MODULE,
4570 .proc_name = "qla1280",
4571 .name = "Qlogic ISP 1280/12160",
4572 .info = qla1280_info,
4573 .slave_configure = qla1280_slave_configure,
4574 .queuecommand = qla1280_queuecommand,
4575 .eh_abort_handler = qla1280_eh_abort,
4576 .eh_device_reset_handler= qla1280_eh_device_reset,
4577 .eh_bus_reset_handler = qla1280_eh_bus_reset,
4578 .eh_host_reset_handler = qla1280_eh_adapter_reset,
4579 .bios_param = qla1280_biosparam,
4580 .can_queue = 0xfffff,
4581 .this_id = -1,
4582 .sg_tablesize = SG_ALL,
4583 .cmd_per_lun = 1,
4584 .use_clustering = ENABLE_CLUSTERING,
4585};
4586#else
4587static Scsi_Host_Template qla1280_driver_template = {
4588 .proc_name = "qla1280",
4589 .name = "Qlogic ISP 1280/12160",
4590 .detect = qla1280_detect,
4591 .release = qla1280_release,
4592 .info = qla1280_info,
4593 .queuecommand = qla1280_queuecommand,
4594 .eh_abort_handler = qla1280_eh_abort,
4595 .eh_device_reset_handler= qla1280_eh_device_reset,
4596 .eh_bus_reset_handler = qla1280_eh_bus_reset,
4597 .eh_host_reset_handler = qla1280_eh_adapter_reset,
4598 .bios_param = qla1280_biosparam_old,
4599 .can_queue = 0xfffff,
4600 .this_id = -1,
4601 .sg_tablesize = SG_ALL,
4602 .cmd_per_lun = 1,
4603 .use_clustering = ENABLE_CLUSTERING,
4604 .use_new_eh_code = 1,
4605};
4606#endif
4607
4608static int __devinit
4609qla1280_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
4610{
4611 int devnum = id->driver_data;
4612 struct qla_boards *bdp = &ql1280_board_tbl[devnum];
4613 struct Scsi_Host *host;
4614 struct scsi_qla_host *ha;
4615 int error = -ENODEV;
4616
4617 /* Bypass all AMI SUBSYS VENDOR IDs */
4618 if (pdev->subsystem_vendor == PCI_VENDOR_ID_AMI) {
4619 printk(KERN_INFO
4620 "qla1280: Skipping AMI SubSys Vendor ID Chip\n");
4621 goto error;
4622 }
4623
4624 printk(KERN_INFO "qla1280: %s found on PCI bus %i, dev %i\n",
4625 bdp->name, pdev->bus->number, PCI_SLOT(pdev->devfn));
4626
4627 if (pci_enable_device(pdev)) {
4628 printk(KERN_WARNING
4629 "qla1280: Failed to enabled pci device, aborting.\n");
4630 goto error;
4631 }
4632
4633 pci_set_master(pdev);
4634
4635 error = -ENOMEM;
4636 host = scsi_host_alloc(&qla1280_driver_template, sizeof(*ha));
4637 if (!host) {
4638 printk(KERN_WARNING
4639 "qla1280: Failed to register host, aborting.\n");
4640 goto error_disable_device;
4641 }
4642
4643 ha = (struct scsi_qla_host *)host->hostdata;
4644 memset(ha, 0, sizeof(struct scsi_qla_host));
4645
4646 ha->pdev = pdev;
4647 ha->devnum = devnum; /* specifies microcode load address */
4648
4649#ifdef QLA_64BIT_PTR
4650 if (pci_set_dma_mask(ha->pdev, (dma_addr_t) ~ 0ULL)) {
4651 if (pci_set_dma_mask(ha->pdev, 0xffffffff)) {
4652 printk(KERN_WARNING "scsi(%li): Unable to set a "
4653 " suitable DMA mask - aboring\n", ha->host_no);
4654 error = -ENODEV;
4655 goto error_free_irq;
4656 }
4657 } else
4658 dprintk(2, "scsi(%li): 64 Bit PCI Addressing Enabled\n",
4659 ha->host_no);
4660#else
4661 if (pci_set_dma_mask(ha->pdev, 0xffffffff)) {
4662 printk(KERN_WARNING "scsi(%li): Unable to set a "
4663 " suitable DMA mask - aboring\n", ha->host_no);
4664 error = -ENODEV;
4665 goto error_free_irq;
4666 }
4667#endif
4668
4669 ha->request_ring = pci_alloc_consistent(ha->pdev,
4670 ((REQUEST_ENTRY_CNT + 1) * (sizeof(request_t))),
4671 &ha->request_dma);
4672 if (!ha->request_ring) {
4673 printk(KERN_INFO "qla1280: Failed to get request memory\n");
4674 goto error_put_host;
4675 }
4676
4677 ha->response_ring = pci_alloc_consistent(ha->pdev,
4678 ((RESPONSE_ENTRY_CNT + 1) * (sizeof(struct response))),
4679 &ha->response_dma);
4680 if (!ha->response_ring) {
4681 printk(KERN_INFO "qla1280: Failed to get response memory\n");
4682 goto error_free_request_ring;
4683 }
4684
4685 ha->ports = bdp->numPorts;
4686
4687 ha->host = host;
4688 ha->host_no = host->host_no;
4689
4690 host->irq = pdev->irq;
4691 host->max_channel = bdp->numPorts - 1;
4692 host->max_lun = MAX_LUNS - 1;
4693 host->max_id = MAX_TARGETS;
4694 host->max_sectors = 1024;
4695 host->unique_id = host->host_no;
4696
4697#if LINUX_VERSION_CODE < 0x020545
4698 host->select_queue_depths = qla1280_select_queue_depth;
4699#endif
4700
4701 error = -ENODEV;
4702
4703#if MEMORY_MAPPED_IO
4704 ha->mmpbase = ioremap(pci_resource_start(ha->pdev, 1),
4705 pci_resource_len(ha->pdev, 1));
4706 if (!ha->mmpbase) {
4707 printk(KERN_INFO "qla1280: Unable to map I/O memory\n");
4708 goto error_free_response_ring;
4709 }
4710
4711 host->base = (unsigned long)ha->mmpbase;
4712 ha->iobase = (struct device_reg __iomem *)ha->mmpbase;
4713#else
4714 host->io_port = pci_resource_start(ha->pdev, 0);
4715 if (!request_region(host->io_port, 0xff, "qla1280")) {
4716 printk(KERN_INFO "qla1280: Failed to reserve i/o region "
4717 "0x%04lx-0x%04lx - already in use\n",
4718 host->io_port, host->io_port + 0xff);
4719 goto error_free_response_ring;
4720 }
4721
4722 ha->iobase = (struct device_reg *)host->io_port;
4723#endif
4724
4725 INIT_LIST_HEAD(&ha->done_q);
4726
4727 /* Disable ISP interrupts. */
4728 qla1280_disable_intrs(ha);
4729
4730 if (request_irq(pdev->irq, qla1280_intr_handler, SA_SHIRQ,
4731 "qla1280", ha)) {
4732 printk("qla1280 : Failed to reserve interrupt %d already "
4733 "in use\n", pdev->irq);
4734 goto error_release_region;
4735 }
4736
4737 /* load the F/W, read paramaters, and init the H/W */
4738 if (qla1280_initialize_adapter(ha)) {
4739 printk(KERN_INFO "qla1x160: Failed to initialize adapter\n");
4740 goto error_free_irq;
4741 }
4742
4743 /* set our host ID (need to do something about our two IDs) */
4744 host->this_id = ha->bus_settings[0].id;
4745
4746 pci_set_drvdata(pdev, host);
4747
4748#if LINUX_VERSION_CODE >= 0x020600
4749 error = scsi_add_host(host, &pdev->dev);
4750 if (error)
4751 goto error_disable_adapter;
4752 scsi_scan_host(host);
4753#else
4754 scsi_set_pci_device(host, pdev);
4755#endif
4756
4757 return 0;
4758
4759#if LINUX_VERSION_CODE >= 0x020600
4760 error_disable_adapter:
4761 WRT_REG_WORD(&ha->iobase->ictrl, 0);
4762#endif
4763 error_free_irq:
4764 free_irq(pdev->irq, ha);
4765 error_release_region:
4766#if MEMORY_MAPPED_IO
4767 iounmap(ha->mmpbase);
4768#else
4769 release_region(host->io_port, 0xff);
4770#endif
4771 error_free_response_ring:
4772 pci_free_consistent(ha->pdev,
4773 ((RESPONSE_ENTRY_CNT + 1) * (sizeof(struct response))),
4774 ha->response_ring, ha->response_dma);
4775 error_free_request_ring:
4776 pci_free_consistent(ha->pdev,
4777 ((REQUEST_ENTRY_CNT + 1) * (sizeof(request_t))),
4778 ha->request_ring, ha->request_dma);
4779 error_put_host:
4780 scsi_host_put(host);
4781 error_disable_device:
4782 pci_disable_device(pdev);
4783 error:
4784 return error;
4785}
4786
4787
4788static void __devexit
4789qla1280_remove_one(struct pci_dev *pdev)
4790{
4791 struct Scsi_Host *host = pci_get_drvdata(pdev);
4792 struct scsi_qla_host *ha = (struct scsi_qla_host *)host->hostdata;
4793
4794#if LINUX_VERSION_CODE >= 0x020600
4795 scsi_remove_host(host);
4796#endif
4797
4798 WRT_REG_WORD(&ha->iobase->ictrl, 0);
4799
4800 free_irq(pdev->irq, ha);
4801
4802#if MEMORY_MAPPED_IO
4803 iounmap(ha->mmpbase);
4804#else
4805 release_region(host->io_port, 0xff);
4806#endif
4807
4808 pci_free_consistent(ha->pdev,
4809 ((REQUEST_ENTRY_CNT + 1) * (sizeof(request_t))),
4810 ha->request_ring, ha->request_dma);
4811 pci_free_consistent(ha->pdev,
4812 ((RESPONSE_ENTRY_CNT + 1) * (sizeof(struct response))),
4813 ha->response_ring, ha->response_dma);
4814
4815 pci_disable_device(pdev);
4816
4817 scsi_host_put(host);
4818}
4819
4820#if LINUX_VERSION_CODE >= 0x020600
4821static struct pci_driver qla1280_pci_driver = {
4822 .name = "qla1280",
4823 .id_table = qla1280_pci_tbl,
4824 .probe = qla1280_probe_one,
4825 .remove = __devexit_p(qla1280_remove_one),
4826};
4827
4828static int __init
4829qla1280_init(void)
4830{
4831 if (sizeof(struct srb) > sizeof(struct scsi_pointer)) {
4832 printk(KERN_WARNING
4833 "qla1280: struct srb too big, aborting\n");
4834 return -EINVAL;
4835 }
4836
4837#ifdef MODULE
4838 /*
4839 * If we are called as a module, the qla1280 pointer may not be null
4840 * and it would point to our bootup string, just like on the lilo
4841 * command line. IF not NULL, then process this config string with
4842 * qla1280_setup
4843 *
4844 * Boot time Options
4845 * To add options at boot time add a line to your lilo.conf file like:
4846 * append="qla1280=verbose,max_tags:{{255,255,255,255},{255,255,255,255}}"
4847 * which will result in the first four devices on the first two
4848 * controllers being set to a tagged queue depth of 32.
4849 */
4850 if (qla1280)
4851 qla1280_setup(qla1280);
4852#endif
4853
4854 return pci_module_init(&qla1280_pci_driver);
4855}
4856
4857static void __exit
4858qla1280_exit(void)
4859{
4860 pci_unregister_driver(&qla1280_pci_driver);
4861}
4862
4863module_init(qla1280_init);
4864module_exit(qla1280_exit);
4865
4866#else
4867# define driver_template qla1280_driver_template
4868# include "scsi_module.c"
4869#endif
4870
4871MODULE_AUTHOR("Qlogic & Jes Sorensen");
4872MODULE_DESCRIPTION("Qlogic ISP SCSI (qla1x80/qla1x160) driver");
4873MODULE_LICENSE("GPL");
4874MODULE_VERSION(QLA1280_VERSION);
4875
4876/*
4877 * Overrides for Emacs so that we almost follow Linus's tabbing style.
4878 * Emacs will notice this stuff at the end of the file and automatically
4879 * adjust the settings for this buffer only. This must remain at the end
4880 * of the file.
4881 * ---------------------------------------------------------------------------
4882 * Local variables:
4883 * c-basic-offset: 8
4884 * tab-width: 8
4885 * End:
4886 */