blob: 8514a2d82b72a2404420cd813f6aebff08e19f57 [file] [log] [blame]
matthieu castetd2770642008-03-19 19:40:52 +01001/*
2 * Support for emulating SAT (ata pass through) on devices based
3 * on the Cypress USB/ATA bridge supporting ATACB.
4 *
5 * Copyright (c) 2008 Matthieu Castet (castet.matthieu@free.fr)
6 *
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of the GNU General Public License as published by the
9 * Free Software Foundation; either version 2, or (at your option) any
10 * later version.
11 *
12 * This program is distributed in the hope that it will be useful, but
13 * WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
15 * General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License along
18 * with this program; if not, write to the Free Software Foundation, Inc.,
19 * 675 Mass Ave, Cambridge, MA 02139, USA.
20 */
21
Alan Sternfcdb5142009-02-12 14:48:04 -050022#include <linux/module.h>
matthieu castetd2770642008-03-19 19:40:52 +010023#include <scsi/scsi.h>
24#include <scsi/scsi_cmnd.h>
25#include <scsi/scsi_eh.h>
26#include <linux/ata.h>
27
28#include "usb.h"
29#include "protocol.h"
30#include "scsiglue.h"
31#include "debug.h"
32
Maciej Grela4246b062009-02-28 12:39:20 -080033MODULE_DESCRIPTION("SAT support for Cypress USB/ATA bridges with ATACB");
34MODULE_AUTHOR("Matthieu Castet <castet.matthieu@free.fr>");
35MODULE_LICENSE("GPL");
Alan Sternfcdb5142009-02-12 14:48:04 -050036
37/*
38 * The table of devices
39 */
40#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
41 vendorName, productName, useProtocol, useTransport, \
42 initFunction, flags) \
43{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
Sebastian Andrzej Siewiorf61870e2012-08-28 22:37:13 +020044 .driver_info = (flags) }
Alan Sternfcdb5142009-02-12 14:48:04 -050045
Felipe Balbi60e3cfb2011-11-15 09:53:29 +020046static struct usb_device_id cypress_usb_ids[] = {
Alan Sternfcdb5142009-02-12 14:48:04 -050047# include "unusual_cypress.h"
48 { } /* Terminating entry */
49};
50MODULE_DEVICE_TABLE(usb, cypress_usb_ids);
51
52#undef UNUSUAL_DEV
53
54/*
55 * The flags table
56 */
57#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
58 vendor_name, product_name, use_protocol, use_transport, \
59 init_function, Flags) \
60{ \
61 .vendorName = vendor_name, \
62 .productName = product_name, \
63 .useProtocol = use_protocol, \
64 .useTransport = use_transport, \
65 .initFunction = init_function, \
66}
67
68static struct us_unusual_dev cypress_unusual_dev_list[] = {
69# include "unusual_cypress.h"
70 { } /* Terminating entry */
71};
72
73#undef UNUSUAL_DEV
74
75
matthieu castetd2770642008-03-19 19:40:52 +010076/*
77 * ATACB is a protocol used on cypress usb<->ata bridge to
78 * send raw ATA command over mass storage
79 * There is a ATACB2 protocol that support LBA48 on newer chip.
80 * More info that be found on cy7c68310_8.pdf and cy7c68300c_8.pdf
81 * datasheet from cypress.com.
82 */
Alan Sternfcdb5142009-02-12 14:48:04 -050083static void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us)
matthieu castetd2770642008-03-19 19:40:52 +010084{
85 unsigned char save_cmnd[MAX_COMMAND_SIZE];
86
87 if (likely(srb->cmnd[0] != ATA_16 && srb->cmnd[0] != ATA_12)) {
88 usb_stor_transparent_scsi_command(srb, us);
89 return;
90 }
91
92 memcpy(save_cmnd, srb->cmnd, sizeof(save_cmnd));
Boaz Harrosh64a87b22008-04-30 11:19:47 +030093 memset(srb->cmnd, 0, MAX_COMMAND_SIZE);
matthieu castetd2770642008-03-19 19:40:52 +010094
95 /* check if we support the command */
96 if (save_cmnd[1] >> 5) /* MULTIPLE_COUNT */
97 goto invalid_fld;
98 /* check protocol */
99 switch((save_cmnd[1] >> 1) & 0xf) {
100 case 3: /*no DATA */
101 case 4: /* PIO in */
102 case 5: /* PIO out */
103 break;
104 default:
105 goto invalid_fld;
106 }
107
108 /* first build the ATACB command */
109 srb->cmd_len = 16;
110
111 srb->cmnd[0] = 0x24; /* bVSCBSignature : vendor-specific command
112 this value can change, but most(all ?) manufacturers
113 keep the cypress default : 0x24 */
114 srb->cmnd[1] = 0x24; /* bVSCBSubCommand : 0x24 for ATACB */
115
116 srb->cmnd[3] = 0xff - 1; /* features, sector count, lba low, lba med
117 lba high, device, command are valid */
118 srb->cmnd[4] = 1; /* TransferBlockCount : 512 */
119
120 if (save_cmnd[0] == ATA_16) {
121 srb->cmnd[ 6] = save_cmnd[ 4]; /* features */
122 srb->cmnd[ 7] = save_cmnd[ 6]; /* sector count */
123 srb->cmnd[ 8] = save_cmnd[ 8]; /* lba low */
124 srb->cmnd[ 9] = save_cmnd[10]; /* lba med */
125 srb->cmnd[10] = save_cmnd[12]; /* lba high */
126 srb->cmnd[11] = save_cmnd[13]; /* device */
127 srb->cmnd[12] = save_cmnd[14]; /* command */
128
129 if (save_cmnd[1] & 0x01) {/* extended bit set for LBA48 */
130 /* this could be supported by atacb2 */
131 if (save_cmnd[3] || save_cmnd[5] || save_cmnd[7] || save_cmnd[9]
132 || save_cmnd[11])
133 goto invalid_fld;
134 }
135 }
136 else { /* ATA12 */
137 srb->cmnd[ 6] = save_cmnd[3]; /* features */
138 srb->cmnd[ 7] = save_cmnd[4]; /* sector count */
139 srb->cmnd[ 8] = save_cmnd[5]; /* lba low */
140 srb->cmnd[ 9] = save_cmnd[6]; /* lba med */
141 srb->cmnd[10] = save_cmnd[7]; /* lba high */
142 srb->cmnd[11] = save_cmnd[8]; /* device */
143 srb->cmnd[12] = save_cmnd[9]; /* command */
144
145 }
146 /* Filter SET_FEATURES - XFER MODE command */
147 if ((srb->cmnd[12] == ATA_CMD_SET_FEATURES)
148 && (srb->cmnd[6] == SETFEATURES_XFER))
149 goto invalid_fld;
150
151 if (srb->cmnd[12] == ATA_CMD_ID_ATA || srb->cmnd[12] == ATA_CMD_ID_ATAPI)
152 srb->cmnd[2] |= (1<<7); /* set IdentifyPacketDevice for these cmds */
153
154
155 usb_stor_transparent_scsi_command(srb, us);
156
157 /* if the device doesn't support ATACB
158 */
159 if (srb->result == SAM_STAT_CHECK_CONDITION &&
160 memcmp(srb->sense_buffer, usb_stor_sense_invalidCDB,
161 sizeof(usb_stor_sense_invalidCDB)) == 0) {
Joe Perches191648d2013-04-19 11:44:00 -0700162 usb_stor_dbg(us, "cypress atacb not supported ???\n");
matthieu castetd2770642008-03-19 19:40:52 +0100163 goto end;
164 }
165
166 /* if ck_cond flags is set, and there wasn't critical error,
167 * build the special sense
168 */
169 if ((srb->result != (DID_ERROR << 16) &&
170 srb->result != (DID_ABORT << 16)) &&
171 save_cmnd[2] & 0x20) {
172 struct scsi_eh_save ses;
173 unsigned char regs[8];
174 unsigned char *sb = srb->sense_buffer;
175 unsigned char *desc = sb + 8;
176 int tmp_result;
177
178 /* build the command for
179 * reading the ATA registers */
Boaz Harrosh1f4159c2009-02-11 09:54:31 +0200180 scsi_eh_prep_cmnd(srb, &ses, NULL, 0, sizeof(regs));
181
matthieu castetd2770642008-03-19 19:40:52 +0100182 /* we use the same command as before, but we set
183 * the read taskfile bit, for not executing atacb command,
184 * but reading register selected in srb->cmnd[4]
185 */
Boaz Harrosh1f4159c2009-02-11 09:54:31 +0200186 srb->cmd_len = 16;
187 srb->cmnd = ses.cmnd;
matthieu castetd2770642008-03-19 19:40:52 +0100188 srb->cmnd[2] = 1;
189
190 usb_stor_transparent_scsi_command(srb, us);
Boaz Harrosh1f4159c2009-02-11 09:54:31 +0200191 memcpy(regs, srb->sense_buffer, sizeof(regs));
matthieu castetd2770642008-03-19 19:40:52 +0100192 tmp_result = srb->result;
193 scsi_eh_restore_cmnd(srb, &ses);
194 /* we fail to get registers, report invalid command */
195 if (tmp_result != SAM_STAT_GOOD)
196 goto invalid_fld;
197
198 /* build the sense */
199 memset(sb, 0, SCSI_SENSE_BUFFERSIZE);
200
201 /* set sk, asc for a good command */
202 sb[1] = RECOVERED_ERROR;
203 sb[2] = 0; /* ATA PASS THROUGH INFORMATION AVAILABLE */
204 sb[3] = 0x1D;
205
206 /* XXX we should generate sk, asc, ascq from status and error
207 * regs
Boaz Harrosh1f4159c2009-02-11 09:54:31 +0200208 * (see 11.1 Error translation ATA device error to SCSI error
209 * map, and ata_to_sense_error from libata.)
matthieu castetd2770642008-03-19 19:40:52 +0100210 */
211
212 /* Sense data is current and format is descriptor. */
213 sb[0] = 0x72;
214 desc[0] = 0x09; /* ATA_RETURN_DESCRIPTOR */
215
216 /* set length of additional sense data */
217 sb[7] = 14;
218 desc[1] = 12;
219
220 /* Copy registers into sense buffer. */
221 desc[ 2] = 0x00;
222 desc[ 3] = regs[1]; /* features */
223 desc[ 5] = regs[2]; /* sector count */
224 desc[ 7] = regs[3]; /* lba low */
225 desc[ 9] = regs[4]; /* lba med */
226 desc[11] = regs[5]; /* lba high */
227 desc[12] = regs[6]; /* device */
228 desc[13] = regs[7]; /* command */
229
230 srb->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
231 }
232 goto end;
233invalid_fld:
234 srb->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
235
236 memcpy(srb->sense_buffer,
237 usb_stor_sense_invalidCDB,
238 sizeof(usb_stor_sense_invalidCDB));
239end:
240 memcpy(srb->cmnd, save_cmnd, sizeof(save_cmnd));
241 if (srb->cmnd[0] == ATA_12)
242 srb->cmd_len = 12;
243}
Alan Sternfcdb5142009-02-12 14:48:04 -0500244
245
246static int cypress_probe(struct usb_interface *intf,
247 const struct usb_device_id *id)
248{
249 struct us_data *us;
250 int result;
Tormod Volden671b4b22013-04-20 14:24:04 +0200251 struct usb_device *device;
Alan Sternfcdb5142009-02-12 14:48:04 -0500252
253 result = usb_stor_probe1(&us, intf, id,
254 (id - cypress_usb_ids) + cypress_unusual_dev_list);
255 if (result)
256 return result;
257
Tormod Volden671b4b22013-04-20 14:24:04 +0200258 /* Among CY7C68300 chips, the A revision does not support Cypress ATACB
259 * Filter out this revision from EEPROM default descriptor values
260 */
261 device = interface_to_usbdev(intf);
262 if (device->descriptor.iManufacturer != 0x38 ||
263 device->descriptor.iProduct != 0x4e ||
264 device->descriptor.iSerialNumber != 0x64) {
265 us->protocol_name = "Transparent SCSI with Cypress ATACB";
266 us->proto_handler = cypress_atacb_passthrough;
267 } else {
268 us->protocol_name = "Transparent SCSI";
269 us->proto_handler = usb_stor_transparent_scsi_command;
270 }
Alan Sternfcdb5142009-02-12 14:48:04 -0500271
272 result = usb_stor_probe2(us);
273 return result;
274}
275
276static struct usb_driver cypress_driver = {
277 .name = "ums-cypress",
278 .probe = cypress_probe,
279 .disconnect = usb_stor_disconnect,
280 .suspend = usb_stor_suspend,
281 .resume = usb_stor_resume,
282 .reset_resume = usb_stor_reset_resume,
283 .pre_reset = usb_stor_pre_reset,
284 .post_reset = usb_stor_post_reset,
285 .id_table = cypress_usb_ids,
286 .soft_unbind = 1,
Huajun Lie73b2db2012-01-14 10:15:21 +0800287 .no_dynamic_id = 1,
Alan Sternfcdb5142009-02-12 14:48:04 -0500288};
289
Greg Kroah-Hartman65db4302011-11-18 09:34:02 -0800290module_usb_driver(cypress_driver);