blob: 313d3060fc1d64e646c41370bd23f1cfa42e4445 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#
2# Network device configuration
3#
4
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07005menuconfig NETDEVICES
Paolo 'Blaisorblade' Giarrussoce2d2ae2006-01-18 17:42:59 -08006 default y if UML
Jan Engelhardte0009822007-07-21 19:11:35 -07007 depends on NET
Linus Torvalds1da177e2005-04-16 15:20:36 -07008 bool "Network device support"
9 ---help---
10 You can say N here if you don't intend to connect your Linux box to
11 any other computer at all.
12
13 You'll have to say Y if your computer contains a network card that
14 you want to use under Linux. If you are going to run SLIP or PPP over
15 telephone line or null modem cable you need say Y here. Connecting
16 two machines with parallel ports using PLIP needs this, as well as
17 AX.25/KISS for sending Internet traffic over amateur radio links.
18
19 See also "The Linux Network Administrator's Guide" by Olaf Kirch and
20 Terry Dawson. Available at <http://www.tldp.org/guides.html>.
21
22 If unsure, say Y.
23
Randy Dunlap1618cb02006-09-25 23:11:21 -070024# All the following symbols are dependent on NETDEVICES - do not repeat
25# that for each of the symbols.
26if NETDEVICES
Randy Dunlapcbcd2a42005-07-27 13:04:35 -070027
Jamal Hadi Salim253af422006-01-08 22:34:25 -080028config IFB
29 tristate "Intermediate Functional Block support"
30 depends on NET_CLS_ACT
31 ---help---
Matt LaPlante3cb2fcc2006-11-30 05:22:59 +010032 This is an intermediate driver that allows sharing of
Jamal Hadi Salim253af422006-01-08 22:34:25 -080033 resources.
34 To compile this driver as a module, choose M here: the module
35 will be called ifb. If you want to use more than one ifb
36 device at a time, you need to compile this driver as a module.
37 Instead of 'ifb', the devices will then be called 'ifb0',
38 'ifb1' etc.
39 Look at the iproute2 documentation directory for usage etc
40
Linus Torvalds1da177e2005-04-16 15:20:36 -070041config DUMMY
42 tristate "Dummy net driver support"
Linus Torvalds1da177e2005-04-16 15:20:36 -070043 ---help---
44 This is essentially a bit-bucket device (i.e. traffic you send to
45 this device is consigned into oblivion) with a configurable IP
46 address. It is most commonly used in order to make your currently
47 inactive SLIP address seem like a real address for local programs.
48 If you use SLIP or PPP, you might want to say Y here. Since this
49 thing often comes in handy, the default is Y. It won't enlarge your
50 kernel either. What a deal. Read about it in the Network
51 Administrator's Guide, available from
52 <http://www.tldp.org/docs.html#guide>.
53
54 To compile this driver as a module, choose M here: the module
55 will be called dummy. If you want to use more than one dummy
56 device at a time, you need to compile this driver as a module.
57 Instead of 'dummy', the devices will then be called 'dummy0',
58 'dummy1' etc.
59
60config BONDING
61 tristate "Bonding driver support"
Linus Torvalds1da177e2005-04-16 15:20:36 -070062 depends on INET
Brian Haley305d5522008-11-04 17:51:14 -080063 depends on IPV6 || IPV6=n
Linus Torvalds1da177e2005-04-16 15:20:36 -070064 ---help---
65 Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet
66 Channels together. This is called 'Etherchannel' by Cisco,
67 'Trunking' by Sun, 802.3ad by the IEEE, and 'Bonding' in Linux.
68
69 The driver supports multiple bonding modes to allow for both high
Jon Mason47c51432006-02-12 11:53:04 -060070 performance and high availability operation.
Linus Torvalds1da177e2005-04-16 15:20:36 -070071
72 Refer to <file:Documentation/networking/bonding.txt> for more
73 information.
74
75 To compile this driver as a module, choose M here: the module
76 will be called bonding.
77
Patrick McHardyb863ceb2007-07-14 18:55:06 -070078config MACVLAN
79 tristate "MAC-VLAN support (EXPERIMENTAL)"
80 depends on EXPERIMENTAL
81 ---help---
82 This allows one to create virtual interfaces that map packets to
83 or from specific MAC addresses to a particular interface.
84
Patrick McHardy3dbf8d52008-02-26 17:52:05 -080085 Macvlan devices can be added using the "ip" command from the
86 iproute2 package starting with the iproute2-2.6.23 release:
87
88 "ip link add link <real dev> [ address MAC ] [ NAME ] type macvlan"
89
Patrick McHardyb863ceb2007-07-14 18:55:06 -070090 To compile this driver as a module, choose M here: the module
91 will be called macvlan.
92
Arnd Bergmann20d29d72010-01-30 12:24:26 +000093config MACVTAP
94 tristate "MAC-VLAN based tap driver (EXPERIMENTAL)"
95 depends on MACVLAN
96 help
97 This adds a specialized tap character device driver that is based
98 on the MAC-VLAN network interface, called macvtap. A macvtap device
99 can be added in the same way as a macvlan device, using 'type
100 macvlan', and then be accessed through the tap user space interface.
101
102 To compile this driver as a module, choose M here: the module
103 will be called macvtap.
104
Linus Torvalds1da177e2005-04-16 15:20:36 -0700105config EQUALIZER
106 tristate "EQL (serial line load balancing) support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700107 ---help---
108 If you have two serial connections to some other computer (this
109 usually requires two modems and two telephone lines) and you use
110 SLIP (the protocol for sending Internet traffic over telephone
111 lines) or PPP (a better SLIP) on them, you can make them behave like
112 one double speed connection using this driver. Naturally, this has
113 to be supported at the other end as well, either with a similar EQL
114 Linux driver or with a Livingston Portmaster 2e.
115
116 Say Y if you want this and read
117 <file:Documentation/networking/eql.txt>. You may also want to read
118 section 6.2 of the NET-3-HOWTO, available from
119 <http://www.tldp.org/docs.html#howto>.
120
121 To compile this driver as a module, choose M here: the module
122 will be called eql. If unsure, say N.
123
124config TUN
125 tristate "Universal TUN/TAP device driver support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700126 select CRC32
127 ---help---
128 TUN/TAP provides packet reception and transmission for user space
129 programs. It can be viewed as a simple Point-to-Point or Ethernet
130 device, which instead of receiving packets from a physical media,
131 receives them from user space program and instead of sending packets
132 via physical media writes them to the user space program.
133
134 When a program opens /dev/net/tun, driver creates and registers
135 corresponding net device tunX or tapX. After a program closed above
136 devices, driver will automatically delete tunXX or tapXX device and
137 all routes corresponding to it.
138
139 Please read <file:Documentation/networking/tuntap.txt> for more
140 information.
141
142 To compile this driver as a module, choose M here: the module
143 will be called tun.
144
145 If you don't know what to use this for, you don't need it.
146
Pavel Emelyanove314dbd2007-09-25 16:14:46 -0700147config VETH
Rusty Russell6a9a0252007-11-06 20:35:55 -0800148 tristate "Virtual ethernet pair device"
Pavel Emelyanove314dbd2007-09-25 16:14:46 -0700149 ---help---
Rusty Russell6a9a0252007-11-06 20:35:55 -0800150 This device is a local ethernet tunnel. Devices are created in pairs.
151 When one end receives the packet it appears on its pair and vice
152 versa.
Pavel Emelyanove314dbd2007-09-25 16:14:46 -0700153
Linus Torvalds1da177e2005-04-16 15:20:36 -0700154config NET_SB1000
155 tristate "General Instruments Surfboard 1000"
Randy Dunlapcbcd2a42005-07-27 13:04:35 -0700156 depends on PNP
Linus Torvalds1da177e2005-04-16 15:20:36 -0700157 ---help---
158 This is a driver for the General Instrument (also known as
159 NextLevel) SURFboard 1000 internal
160 cable modem. This is an ISA card which is used by a number of cable
161 TV companies to provide cable modem access. It's a one-way
162 downstream-only cable modem, meaning that your upstream net link is
163 provided by your regular phone modem.
164
165 At present this driver only compiles as a module, so say M here if
166 you have this card. The module will be called sb1000. Then read
167 <file:Documentation/networking/README.sb1000> for information on how
168 to use this module, as it needs special ppp scripts for establishing
169 a connection. Further documentation and the necessary scripts can be
170 found at:
171
172 <http://www.jacksonville.net/~fventuri/>
173 <http://home.adelphia.net/~siglercm/sb1000.html>
174 <http://linuxpower.cx/~cable/>
175
176 If you don't have this card, of course say N.
177
Adrian Bunkf65fd8f2006-01-05 22:45:41 -0800178source "drivers/net/arcnet/Kconfig"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700179
Andy Fleming00db8182005-07-30 19:31:23 -0400180source "drivers/net/phy/Kconfig"
181
Linus Torvalds1da177e2005-04-16 15:20:36 -0700182#
183# Ethernet
184#
185
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700186menuconfig NET_ETHERNET
Linus Torvalds1da177e2005-04-16 15:20:36 -0700187 bool "Ethernet (10 or 100Mbit)"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700188 depends on !UML
Linus Torvalds1da177e2005-04-16 15:20:36 -0700189 ---help---
190 Ethernet (also called IEEE 802.3 or ISO 8802-2) is the most common
191 type of Local Area Network (LAN) in universities and companies.
192
193 Common varieties of Ethernet are: 10BASE-2 or Thinnet (10 Mbps over
194 coaxial cable, linking computers in a chain), 10BASE-T or twisted
195 pair (10 Mbps over twisted pair cable, linking computers to central
196 hubs), 10BASE-F (10 Mbps over optical fiber links, using hubs),
197 100BASE-TX (100 Mbps over two twisted pair cables, using hubs),
198 100BASE-T4 (100 Mbps over 4 standard voice-grade twisted pair
199 cables, using hubs), 100BASE-FX (100 Mbps over optical fiber links)
200 [the 100BASE varieties are also known as Fast Ethernet], and Gigabit
201 Ethernet (1 Gbps over optical fiber or short copper links).
202
203 If your Linux machine will be connected to an Ethernet and you have
204 an Ethernet network interface card (NIC) installed in your computer,
205 say Y here and read the Ethernet-HOWTO, available from
206 <http://www.tldp.org/docs.html#howto>. You will then also have
207 to say Y to the driver for your particular NIC.
208
209 Note that the answer to this question won't directly affect the
210 kernel: saying N will just cause the configurator to skip all
211 the questions about Ethernet network cards. If unsure, say N.
212
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700213if NET_ETHERNET
214
Linus Torvalds1da177e2005-04-16 15:20:36 -0700215config MII
216 tristate "Generic Media Independent Interface device support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700217 help
218 Most ethernet controllers have MII transceiver either as an external
219 or internal device. It is safe to say Y or M here even if your
220 ethernet card lack MII.
221
Haavard Skinnemoen89e57852006-11-09 14:51:17 +0100222config MACB
223 tristate "Atmel MACB support"
Nicolas Ferre789b23b2009-06-26 15:36:58 +0100224 depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91SAM9G20 || ARCH_AT91SAM9G45 || ARCH_AT91CAP9
frederic RODO6c36a702007-07-12 19:07:24 +0200225 select PHYLIB
Haavard Skinnemoen89e57852006-11-09 14:51:17 +0100226 help
227 The Atmel MACB ethernet interface is found on many AT32 and AT91
228 parts. Say Y to include support for the MACB chip.
229
230 To compile this driver as a module, choose M here: the module
231 will be called macb.
232
Linus Torvalds1da177e2005-04-16 15:20:36 -0700233source "drivers/net/arm/Kconfig"
234
Ben Dooks825a2ff2007-07-03 16:53:09 +0100235config AX88796
236 tristate "ASIX AX88796 NE2000 clone support"
Magnus Damm86879912007-11-08 16:31:05 +0900237 depends on ARM || MIPS || SUPERH
Ben Dooks825a2ff2007-07-03 16:53:09 +0100238 select CRC32
239 select MII
240 help
241 AX88796 driver, using platform bus to provide
242 chip detection and resources
243
Magnus Damm89e536a2007-09-28 22:42:16 -0700244config AX88796_93CX6
245 bool "ASIX AX88796 external 93CX6 eeprom support"
246 depends on AX88796
247 select EEPROM_93CX6
248 help
249 Select this if your platform comes with an external 93CX6 eeprom.
250
Linus Torvalds1da177e2005-04-16 15:20:36 -0700251config MACE
252 tristate "MACE (Power Mac ethernet) support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700253 depends on PPC_PMAC && PPC32
Linus Torvalds1da177e2005-04-16 15:20:36 -0700254 select CRC32
255 help
256 Power Macintoshes and clones with Ethernet built-in on the
257 motherboard will usually use a MACE (Medium Access Control for
258 Ethernet) interface. Say Y to include support for the MACE chip.
259
260 To compile this driver as a module, choose M here: the module
261 will be called mace.
262
263config MACE_AAUI_PORT
264 bool "Use AAUI port instead of TP by default"
265 depends on MACE
266 help
267 Some Apple machines (notably the Apple Network Server) which use the
268 MACE ethernet chip have an Apple AUI port (small 15-pin connector),
269 instead of an 8-pin RJ45 connector for twisted-pair ethernet. Say
270 Y here if you have such a machine. If unsure, say N.
271 The driver will default to AAUI on ANS anyway, and if you use it as
272 a module, you can provide the port_aaui=0|1 to force the driver.
273
274config BMAC
275 tristate "BMAC (G3 ethernet) support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700276 depends on PPC_PMAC && PPC32
Linus Torvalds1da177e2005-04-16 15:20:36 -0700277 select CRC32
278 help
279 Say Y for support of BMAC Ethernet interfaces. These are used on G3
280 computers.
281
282 To compile this driver as a module, choose M here: the module
283 will be called bmac.
284
Linus Torvalds1da177e2005-04-16 15:20:36 -0700285config ARIADNE
286 tristate "Ariadne support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700287 depends on ZORRO
Linus Torvalds1da177e2005-04-16 15:20:36 -0700288 help
289 If you have a Village Tronic Ariadne Ethernet adapter, say Y.
290 Otherwise, say N.
291
292 To compile this driver as a module, choose M here: the module
293 will be called ariadne.
294
295config A2065
296 tristate "A2065 support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700297 depends on ZORRO
Linus Torvalds1da177e2005-04-16 15:20:36 -0700298 select CRC32
299 help
300 If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
301 say N.
302
303 To compile this driver as a module, choose M here: the module
304 will be called a2065.
305
306config HYDRA
307 tristate "Hydra support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700308 depends on ZORRO
Linus Torvalds1da177e2005-04-16 15:20:36 -0700309 select CRC32
310 help
311 If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
312
313 To compile this driver as a module, choose M here: the module
314 will be called hydra.
315
316config ZORRO8390
317 tristate "Zorro NS8390-based Ethernet support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700318 depends on ZORRO
Linus Torvalds1da177e2005-04-16 15:20:36 -0700319 select CRC32
320 help
321 This driver is for Zorro Ethernet cards using an NS8390-compatible
322 chipset, like the Village Tronic Ariadne II and the Individual
323 Computers X-Surf Ethernet cards. If you have such a card, say Y.
324 Otherwise, say N.
325
326 To compile this driver as a module, choose M here: the module
327 will be called zorro8390.
328
329config APNE
330 tristate "PCMCIA NE2000 support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700331 depends on AMIGA_PCMCIA
Linus Torvalds1da177e2005-04-16 15:20:36 -0700332 select CRC32
333 help
334 If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise,
335 say N.
336
337 To compile this driver as a module, choose M here: the module
338 will be called apne.
339
Linus Torvalds1da177e2005-04-16 15:20:36 -0700340config MAC8390
341 bool "Macintosh NS 8390 based ethernet cards"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700342 depends on MAC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700343 select CRC32
344 help
345 If you want to include a driver to support Nubus or LC-PDS
346 Ethernet cards using an NS8390 chipset or its equivalent, say Y
347 and read the Ethernet-HOWTO, available from
348 <http://www.tldp.org/docs.html#howto>.
349
350config MAC89x0
351 tristate "Macintosh CS89x0 based ethernet cards"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700352 depends on MAC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700353 ---help---
354 Support for CS89x0 chipset based Ethernet cards. If you have a
355 Nubus or LC-PDS network (Ethernet) card of this type, say Y and
356 read the Ethernet-HOWTO, available from
357 <http://www.tldp.org/docs.html#howto>.
358
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800359 To compile this driver as a module, choose M here. This module will
Linus Torvalds1da177e2005-04-16 15:20:36 -0700360 be called mac89x0.
361
362config MACSONIC
363 tristate "Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700364 depends on MAC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700365 ---help---
366 Support for NatSemi SONIC based Ethernet devices. This includes
367 the onboard Ethernet in many Quadras as well as some LC-PDS,
368 a few Nubus and all known Comm Slot Ethernet cards. If you have
369 one of these say Y and read the Ethernet-HOWTO, available from
370 <http://www.tldp.org/docs.html#howto>.
371
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800372 To compile this driver as a module, choose M here. This module will
Linus Torvalds1da177e2005-04-16 15:20:36 -0700373 be called macsonic.
374
375config MACMACE
Finn Thain8b6aaab2007-05-01 22:33:01 +0200376 bool "Macintosh (AV) onboard MACE ethernet"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700377 depends on MAC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700378 select CRC32
379 help
380 Support for the onboard AMD 79C940 MACE Ethernet controller used in
381 the 660AV and 840AV Macintosh. If you have one of these Macintoshes
382 say Y and read the Ethernet-HOWTO, available from
383 <http://www.tldp.org/docs.html#howto>.
384
385config MVME147_NET
386 tristate "MVME147 (Lance) Ethernet support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700387 depends on MVME147
Linus Torvalds1da177e2005-04-16 15:20:36 -0700388 select CRC32
389 help
390 Support for the on-board Ethernet interface on the Motorola MVME147
391 single-board computer. Say Y here to include the
392 driver for this chip in your kernel.
393 To compile this driver as a module, choose M here.
394
395config MVME16x_NET
396 tristate "MVME16x Ethernet support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700397 depends on MVME16x
Linus Torvalds1da177e2005-04-16 15:20:36 -0700398 help
399 This is the driver for the Ethernet interface on the Motorola
400 MVME162, 166, 167, 172 and 177 boards. Say Y here to include the
401 driver for this chip in your kernel.
402 To compile this driver as a module, choose M here.
403
404config BVME6000_NET
405 tristate "BVME6000 Ethernet support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700406 depends on BVME6000
Linus Torvalds1da177e2005-04-16 15:20:36 -0700407 help
408 This is the driver for the Ethernet interface on BVME4000 and
409 BVME6000 VME boards. Say Y here to include the driver for this chip
410 in your kernel.
411 To compile this driver as a module, choose M here.
412
413config ATARILANCE
414 tristate "Atari Lance support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700415 depends on ATARI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700416 help
417 Say Y to include support for several Atari Ethernet adapters based
418 on the AMD Lance chipset: RieblCard (with or without battery), or
419 PAMCard VME (also the version by Rhotron, with different addresses).
420
Linus Torvalds1da177e2005-04-16 15:20:36 -0700421config SUN3LANCE
422 tristate "Sun3/Sun3x on-board LANCE support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700423 depends on SUN3 || SUN3X
Linus Torvalds1da177e2005-04-16 15:20:36 -0700424 help
425 Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
426 featured an AMD Lance 10Mbit Ethernet controller on board; say Y
427 here to compile in the Linux driver for this and enable Ethernet.
428 General Linux information on the Sun 3 and 3x series (now
429 discontinued) is at
430 <http://www.angelfire.com/ca2/tech68k/sun3.html>.
431
432 If you're not building a kernel for a Sun 3, say N.
433
434config SUN3_82586
Al Viro9a482202005-08-25 06:24:56 +0100435 bool "Sun3 on-board Intel 82586 support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700436 depends on SUN3
Linus Torvalds1da177e2005-04-16 15:20:36 -0700437 help
438 This driver enables support for the on-board Intel 82586 based
439 Ethernet adapter found on Sun 3/1xx and 3/2xx motherboards. Note
440 that this driver does not support 82586-based adapters on additional
441 VME boards.
442
443config HPLANCE
444 bool "HP on-board LANCE support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700445 depends on DIO
Linus Torvalds1da177e2005-04-16 15:20:36 -0700446 select CRC32
447 help
448 If you want to use the builtin "LANCE" Ethernet controller on an
449 HP300 machine, say Y here.
450
451config LASI_82596
452 tristate "Lasi ethernet"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700453 depends on GSC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700454 help
Matthew Wilcox6de187e2006-11-18 10:05:16 -0700455 Say Y here to support the builtin Intel 82596 ethernet controller
456 found in Hewlett-Packard PA-RISC machines with 10Mbit ethernet.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700457
Thomas Bogendoerferf2ec8032007-06-28 00:49:06 +0200458config SNI_82596
459 tristate "SNI RM ethernet"
460 depends on NET_ETHERNET && SNI_RM
461 help
462 Say Y here to support the on-board Intel 82596 ethernet controller
463 built into SNI RM machines.
464
Florian Fainellief112912008-03-19 17:14:51 +0100465config KORINA
466 tristate "Korina (IDT RC32434) Ethernet support"
Ralf Baechlef57b2062008-04-28 12:48:40 +0100467 depends on NET_ETHERNET && MIKROTIK_RB532
Florian Fainellief112912008-03-19 17:14:51 +0100468 help
469 If you have a Mikrotik RouterBoard 500 or IDT RC32434
470 based system say Y. Otherwise say N.
471
Linus Torvalds1da177e2005-04-16 15:20:36 -0700472config MIPS_JAZZ_SONIC
473 tristate "MIPS JAZZ onboard SONIC Ethernet support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700474 depends on MACH_JAZZ
Linus Torvalds1da177e2005-04-16 15:20:36 -0700475 help
476 This is the driver for the onboard card of MIPS Magnum 4000,
477 Acer PICA, Olivetti M700-10 and a few other identical OEM systems.
478
Chris Zankel74f2a5f02008-05-05 23:36:35 -0700479config XTENSA_XT2000_SONIC
480 tristate "Xtensa XT2000 onboard SONIC Ethernet support"
481 depends on XTENSA_PLATFORM_XT2000
482 help
483 This is the driver for the onboard card of the Xtensa XT2000 board.
484
Linus Torvalds1da177e2005-04-16 15:20:36 -0700485config MIPS_AU1X00_ENET
Florian Fainellib233fc62010-04-06 22:08:53 +0000486 tristate "MIPS AU1000 Ethernet support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700487 depends on SOC_AU1X00
Herbert Valerio Riedel0638dec2006-06-01 09:41:04 +0200488 select PHYLIB
Linus Torvalds1da177e2005-04-16 15:20:36 -0700489 select CRC32
490 help
491 If you have an Alchemy Semi AU1X00 based system
492 say Y. Otherwise, say N.
493
Linus Torvalds1da177e2005-04-16 15:20:36 -0700494config SGI_IOC3_ETH
495 bool "SGI IOC3 Ethernet"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700496 depends on PCI && SGI_IP27
Linus Torvalds1da177e2005-04-16 15:20:36 -0700497 select CRC32
498 select MII
499 help
500 If you have a network (Ethernet) card of this type, say Y and read
501 the Ethernet-HOWTO, available from
502 <http://www.tldp.org/docs.html#howto>.
503
Ralf Baechledcbf8472005-10-10 14:51:27 +0100504config MIPS_SIM_NET
Ralf Baechle1e2b9802007-03-18 23:21:22 +0000505 tristate "MIPS simulator Network device"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700506 depends on MIPS_SIM
Ralf Baechledcbf8472005-10-10 14:51:27 +0100507 help
508 The MIPSNET device is a simple Ethernet network device which is
509 emulated by the MIPS Simulator.
510 If you are not using a MIPSsim or are unsure, say N.
511
Linus Torvalds1da177e2005-04-16 15:20:36 -0700512config SGI_O2MACE_ETH
513 tristate "SGI O2 MACE Fast Ethernet support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700514 depends on SGI_IP32=y
Linus Torvalds1da177e2005-04-16 15:20:36 -0700515
516config STNIC
517 tristate "National DP83902AV support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700518 depends on SUPERH
Linus Torvalds1da177e2005-04-16 15:20:36 -0700519 select CRC32
520 help
521 Support for cards based on the National Semiconductor DP83902AV
522 ST-NIC Serial Network Interface Controller for Twisted Pair. This
523 is a 10Mbit/sec Ethernet controller. Product overview and specs at
524 <http://www.national.com/pf/DP/DP83902A.html>.
525
526 If unsure, say N.
527
Nobuhiro Iwamatsu86a74ff2008-06-09 16:33:56 -0700528config SH_ETH
529 tristate "Renesas SuperH Ethernet support"
530 depends on SUPERH && \
Yoshihiro Shimoda65ac8852009-05-24 23:54:30 +0000531 (CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712 || \
532 CPU_SUBTYPE_SH7763 || CPU_SUBTYPE_SH7619 || \
533 CPU_SUBTYPE_SH7724)
Nobuhiro Iwamatsu86a74ff2008-06-09 16:33:56 -0700534 select CRC32
535 select MII
536 select MDIO_BITBANG
537 select PHYLIB
538 help
539 Renesas SuperH Ethernet device driver.
Yoshihiro Shimoda65ac8852009-05-24 23:54:30 +0000540 This driver support SH7710, SH7712, SH7763, SH7619, and SH7724.
Nobuhiro Iwamatsu86a74ff2008-06-09 16:33:56 -0700541
Linus Torvalds1da177e2005-04-16 15:20:36 -0700542config SUNLANCE
543 tristate "Sun LANCE support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700544 depends on SBUS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700545 select CRC32
546 help
547 This driver supports the "le" interface present on all 32-bit Sparc
548 systems, on some older Ultra systems and as an Sbus option. These
549 cards are based on the AMD Lance chipset, which is better known
550 via the NE2100 cards.
551
552 To compile this driver as a module, choose M here: the module
553 will be called sunlance.
554
555config HAPPYMEAL
556 tristate "Sun Happy Meal 10/100baseT support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700557 depends on SBUS || PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700558 select CRC32
559 help
560 This driver supports the "hme" interface present on most Ultra
561 systems and as an option on older Sbus systems. This driver supports
562 both PCI and Sbus devices. This driver also supports the "qfe" quad
563 100baseT device available in both PCI and Sbus configurations.
564
565 To compile this driver as a module, choose M here: the module
566 will be called sunhme.
567
568config SUNBMAC
569 tristate "Sun BigMAC 10/100baseT support (EXPERIMENTAL)"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700570 depends on SBUS && EXPERIMENTAL
Linus Torvalds1da177e2005-04-16 15:20:36 -0700571 select CRC32
572 help
573 This driver supports the "be" interface available as an Sbus option.
574 This is Sun's older 100baseT Ethernet device.
575
576 To compile this driver as a module, choose M here: the module
577 will be called sunbmac.
578
579config SUNQE
580 tristate "Sun QuadEthernet support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700581 depends on SBUS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700582 select CRC32
583 help
584 This driver supports the "qe" 10baseT Ethernet device, available as
585 an Sbus option. Note that this is not the same as Quad FastEthernet
586 "qfe" which is supported by the Happy Meal driver instead.
587
588 To compile this driver as a module, choose M here: the module
589 will be called sunqe.
590
591config SUNGEM
592 tristate "Sun GEM support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700593 depends on PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700594 select CRC32
595 help
596 Support for the Sun GEM chip, aka Sun GigabitEthernet/P 2.0. See also
597 <http://www.sun.com/products-n-solutions/hardware/docs/pdf/806-3985-10.pdf>.
598
David S. Miller1f26dac2005-09-27 15:24:13 -0700599config CASSINI
600 tristate "Sun Cassini support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700601 depends on PCI
David S. Miller1f26dac2005-09-27 15:24:13 -0700602 select CRC32
603 help
604 Support for the Sun Cassini chip, aka Sun GigaSwift Ethernet. See also
605 <http://www.sun.com/products-n-solutions/hardware/docs/pdf/817-4341-10.pdf>
606
David S. Miller4c521e42007-07-09 22:23:51 -0700607config SUNVNET
608 tristate "Sun Virtual Network support"
609 depends on SUN_LDOMS
610 help
611 Support for virtual network devices under Sun Logical Domains.
612
Linus Torvalds1da177e2005-04-16 15:20:36 -0700613config NET_VENDOR_3COM
614 bool "3COM cards"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700615 depends on ISA || EISA || MCA || PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700616 help
617 If you have a network (Ethernet) card belonging to this class, say Y
618 and read the Ethernet-HOWTO, available from
619 <http://www.tldp.org/docs.html#howto>.
620
621 Note that the answer to this question doesn't directly affect the
622 kernel: saying N will just cause the configurator to skip all
623 the questions about 3COM cards. If you say Y, you will be asked for
624 your specific card in the following questions.
625
626config EL1
627 tristate "3c501 \"EtherLink\" support"
628 depends on NET_VENDOR_3COM && ISA
629 ---help---
630 If you have a network (Ethernet) card of this type, say Y and read
631 the Ethernet-HOWTO, available from
632 <http://www.tldp.org/docs.html#howto>. Also, consider buying a
633 new card, since the 3c501 is slow, broken, and obsolete: you will
634 have problems. Some people suggest to ping ("man ping") a nearby
635 machine every minute ("man cron") when using this card.
636
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800637 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700638 will be called 3c501.
639
640config EL2
641 tristate "3c503 \"EtherLink II\" support"
642 depends on NET_VENDOR_3COM && ISA
643 select CRC32
644 help
645 If you have a network (Ethernet) card of this type, say Y and read
646 the Ethernet-HOWTO, available from
647 <http://www.tldp.org/docs.html#howto>.
648
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800649 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700650 will be called 3c503.
651
652config ELPLUS
653 tristate "3c505 \"EtherLink Plus\" support"
Al Viroa5532602005-05-04 05:39:42 +0100654 depends on NET_VENDOR_3COM && ISA && ISA_DMA_API
Linus Torvalds1da177e2005-04-16 15:20:36 -0700655 ---help---
656 Information about this network (Ethernet) card can be found in
657 <file:Documentation/networking/3c505.txt>. If you have a card of
658 this type, say Y and read the Ethernet-HOWTO, available from
659 <http://www.tldp.org/docs.html#howto>.
660
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800661 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700662 will be called 3c505.
663
664config EL16
665 tristate "3c507 \"EtherLink 16\" support (EXPERIMENTAL)"
666 depends on NET_VENDOR_3COM && ISA && EXPERIMENTAL
667 help
668 If you have a network (Ethernet) card of this type, say Y and read
669 the Ethernet-HOWTO, available from
670 <http://www.tldp.org/docs.html#howto>.
671
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800672 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700673 will be called 3c507.
674
675config EL3
676 tristate "3c509/3c529 (MCA)/3c579 \"EtherLink III\" support"
677 depends on NET_VENDOR_3COM && (ISA || EISA || MCA)
678 ---help---
679 If you have a network (Ethernet) card belonging to the 3Com
680 EtherLinkIII series, say Y and read the Ethernet-HOWTO, available
681 from <http://www.tldp.org/docs.html#howto>.
682
683 If your card is not working you may need to use the DOS
684 setup disk to disable Plug & Play mode, and to select the default
685 media type.
686
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800687 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700688 will be called 3c509.
689
690config 3C515
691 tristate "3c515 ISA \"Fast EtherLink\""
Al Viroa5532602005-05-04 05:39:42 +0100692 depends on NET_VENDOR_3COM && (ISA || EISA) && ISA_DMA_API
Linus Torvalds1da177e2005-04-16 15:20:36 -0700693 help
694 If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet
695 network card, say Y and read the Ethernet-HOWTO, available from
696 <http://www.tldp.org/docs.html#howto>.
697
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800698 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700699 will be called 3c515.
700
701config ELMC
702 tristate "3c523 \"EtherLink/MC\" support"
703 depends on NET_VENDOR_3COM && MCA_LEGACY
704 help
705 If you have a network (Ethernet) card of this type, say Y and read
706 the Ethernet-HOWTO, available from
707 <http://www.tldp.org/docs.html#howto>.
708
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800709 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700710 will be called 3c523.
711
712config ELMC_II
713 tristate "3c527 \"EtherLink/MC 32\" support (EXPERIMENTAL)"
714 depends on NET_VENDOR_3COM && MCA && MCA_LEGACY
715 help
716 If you have a network (Ethernet) card of this type, say Y and read
717 the Ethernet-HOWTO, available from
718 <http://www.tldp.org/docs.html#howto>.
719
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800720 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700721 will be called 3c527.
722
723config VORTEX
724 tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support"
725 depends on NET_VENDOR_3COM && (PCI || EISA)
726 select MII
727 ---help---
Jon Mason47c51432006-02-12 11:53:04 -0600728 This option enables driver support for a large number of 10Mbps and
729 10/100Mbps EISA, PCI and PCMCIA 3Com network cards:
Linus Torvalds1da177e2005-04-16 15:20:36 -0700730
731 "Vortex" (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI
732 "Boomerang" (EtherLink XL 3c900 or 3c905) PCI
733 "Cyclone" (3c540/3c900/3c905/3c980/3c575/3c656) PCI and Cardbus
734 "Tornado" (3c905) PCI
735 "Hurricane" (3c555/3cSOHO) PCI
736
737 If you have such a card, say Y and read the Ethernet-HOWTO,
738 available from <http://www.tldp.org/docs.html#howto>. More
739 specific information is in
740 <file:Documentation/networking/vortex.txt> and in the comments at
741 the beginning of <file:drivers/net/3c59x.c>.
742
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800743 To compile this support as a module, choose M here.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700744
745config TYPHOON
746 tristate "3cr990 series \"Typhoon\" support"
747 depends on NET_VENDOR_3COM && PCI
748 select CRC32
749 ---help---
750 This option enables driver support for the 3cr990 series of cards:
751
752 3C990-TX, 3CR990-TX-95, 3CR990-TX-97, 3CR990-FX-95, 3CR990-FX-97,
753 3CR990SVR, 3CR990SVR95, 3CR990SVR97, 3CR990-FX-95 Server,
754 3CR990-FX-97 Server, 3C990B-TX-M, 3C990BSVR
755
756 If you have a network (Ethernet) card of this type, say Y and read
757 the Ethernet-HOWTO, available from
758 <http://www.tldp.org/docs.html#howto>.
759
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800760 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700761 will be called typhoon.
762
763config LANCE
764 tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700765 depends on ISA && ISA_DMA_API
Linus Torvalds1da177e2005-04-16 15:20:36 -0700766 help
767 If you have a network (Ethernet) card of this type, say Y and read
768 the Ethernet-HOWTO, available from
769 <http://www.tldp.org/docs.html#howto>. Some LinkSys cards are
770 of this type.
771
772 To compile this driver as a module, choose M here: the module
773 will be called lance. This is recommended.
774
775config NET_VENDOR_SMC
776 bool "Western Digital/SMC cards"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700777 depends on ISA || MCA || EISA || MAC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700778 help
779 If you have a network (Ethernet) card belonging to this class, say Y
780 and read the Ethernet-HOWTO, available from
781 <http://www.tldp.org/docs.html#howto>.
782
783 Note that the answer to this question doesn't directly affect the
784 kernel: saying N will just cause the configurator to skip all
785 the questions about Western Digital cards. If you say Y, you will be
786 asked for your specific card in the following questions.
787
788config WD80x3
789 tristate "WD80*3 support"
790 depends on NET_VENDOR_SMC && ISA
791 select CRC32
792 help
793 If you have a network (Ethernet) card of this type, say Y and read
794 the Ethernet-HOWTO, available from
795 <http://www.tldp.org/docs.html#howto>.
796
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800797 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700798 will be called wd.
799
800config ULTRAMCA
801 tristate "SMC Ultra MCA support"
802 depends on NET_VENDOR_SMC && MCA
803 select CRC32
804 help
805 If you have a network (Ethernet) card of this type and are running
806 an MCA based system (PS/2), say Y and read the Ethernet-HOWTO,
807 available from <http://www.tldp.org/docs.html#howto>.
808
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800809 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700810 will be called smc-mca.
811
812config ULTRA
813 tristate "SMC Ultra support"
814 depends on NET_VENDOR_SMC && ISA
815 select CRC32
816 ---help---
817 If you have a network (Ethernet) card of this type, say Y and read
818 the Ethernet-HOWTO, available from
819 <http://www.tldp.org/docs.html#howto>.
820
821 Important: There have been many reports that, with some motherboards
822 mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible,
823 such as some BusLogic models) causes corruption problems with many
824 operating systems. The Linux smc-ultra driver has a work-around for
825 this but keep it in mind if you have such a SCSI card and have
826 problems.
827
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800828 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700829 will be called smc-ultra.
830
831config ULTRA32
832 tristate "SMC Ultra32 EISA support"
833 depends on NET_VENDOR_SMC && EISA
834 select CRC32
835 help
836 If you have a network (Ethernet) card of this type, say Y and read
837 the Ethernet-HOWTO, available from
838 <http://www.tldp.org/docs.html#howto>.
839
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800840 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700841 will be called smc-ultra32.
842
Bryan Wue190d6b2007-07-17 14:43:44 +0800843config BFIN_MAC
Mike Frysinger736783b2008-08-27 11:47:57 +0800844 tristate "Blackfin on-chip MAC support"
Sonic Zhang33a2a2b2009-01-08 10:52:26 -0800845 depends on NET_ETHERNET && (BF516 || BF518 || BF526 || BF527 || BF536 || BF537)
Bryan Wue190d6b2007-07-17 14:43:44 +0800846 select CRC32
Bryan Wueeb70af2007-09-19 23:37:41 +0800847 select MII
848 select PHYLIB
Bryan Wue190d6b2007-07-17 14:43:44 +0800849 select BFIN_MAC_USE_L1 if DMA_UNCACHED_NONE
850 help
Mike Frysinger736783b2008-08-27 11:47:57 +0800851 This is the driver for Blackfin on-chip mac device. Say Y if you want it
Bryan Wue190d6b2007-07-17 14:43:44 +0800852 compiled into the kernel. This driver is also available as a module
853 ( = code which can be inserted in and removed from the running kernel
854 whenever you want). The module will be called bfin_mac.
855
856config BFIN_MAC_USE_L1
857 bool "Use L1 memory for rx/tx packets"
Michael Hennerich6893ff12008-01-30 16:52:25 +0800858 depends on BFIN_MAC && (BF527 || BF537)
Bryan Wue190d6b2007-07-17 14:43:44 +0800859 default y
860 help
Matt LaPlante01dd2fb2007-10-20 01:34:40 +0200861 To get maximum network performance, you should use L1 memory as rx/tx buffers.
Bryan Wue190d6b2007-07-17 14:43:44 +0800862 Say N here if you want to reserve L1 memory for other uses.
863
864config BFIN_TX_DESC_NUM
865 int "Number of transmit buffer packets"
866 depends on BFIN_MAC
867 range 6 10 if BFIN_MAC_USE_L1
868 range 10 100
869 default "10"
870 help
871 Set the number of buffer packets used in driver.
872
873config BFIN_RX_DESC_NUM
874 int "Number of receive buffer packets"
875 depends on BFIN_MAC
876 range 20 100 if BFIN_MAC_USE_L1
877 range 20 800
878 default "20"
879 help
880 Set the number of buffer packets used in driver.
881
882config BFIN_MAC_RMII
Mike Frysingere06d41d2010-02-15 14:32:50 +0000883 bool "RMII PHY Interface"
884 depends on BFIN_MAC
Michael Hennerich6893ff12008-01-30 16:52:25 +0800885 default y if BFIN527_EZKIT
886 default n if BFIN537_STAMP
Bryan Wue190d6b2007-07-17 14:43:44 +0800887 help
888 Use Reduced PHY MII Interface
889
Barry Songfe92afe2010-05-17 17:19:40 -0700890config BFIN_MAC_USE_HWSTAMP
891 bool "Use IEEE 1588 hwstamp"
892 depends on BFIN_MAC && BF518
893 default y
894 help
895 To support the IEEE 1588 Precision Time Protocol (PTP), select y here
896
Linus Torvalds1da177e2005-04-16 15:20:36 -0700897config SMC9194
898 tristate "SMC 9194 support"
899 depends on NET_VENDOR_SMC && (ISA || MAC && BROKEN)
900 select CRC32
901 ---help---
902 This is support for the SMC9xxx based Ethernet cards. Choose this
903 option if you have a DELL laptop with the docking station, or
904 another SMC9192/9194 based chipset. Say Y if you want it compiled
905 into the kernel, and read the file
906 <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
907 available from <http://www.tldp.org/docs.html#howto>.
908
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800909 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700910 will be called smc9194.
911
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700912config SMC91X
913 tristate "SMC 91C9x/91C1xxx support"
914 select CRC32
915 select MII
Christian Dietrichc76986c2010-07-16 02:29:02 +0000916 depends on ARM || M32R || SUPERH || \
Greg Ungerer717ea4b2010-03-10 07:37:06 -0800917 MIPS || BLACKFIN || MN10300 || COLDFIRE
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700918 help
919 This is a driver for SMC's 91x series of Ethernet chipsets,
920 including the SMC91C94 and the SMC91C111. Say Y if you want it
921 compiled into the kernel, and read the file
922 <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
923 available from <http://www.linuxdoc.org/docs.html#howto>.
924
925 This driver is also available as a module ( = code which can be
926 inserted in and removed from the running kernel whenever you want).
927 The module will be called smc91x. If you want to compile it as a
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800928 module, say M here and read <file:Documentation/kbuild/modules.txt>.
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700929
Sascha Hauer92aa6742006-06-22 07:11:13 +0200930config NET_NETX
931 tristate "NetX Ethernet support"
932 select MII
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700933 depends on ARCH_NETX
Sascha Hauer92aa6742006-06-22 07:11:13 +0200934 help
935 This is support for the Hilscher netX builtin Ethernet ports
936
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800937 To compile this driver as a module, choose M here. The module
Sascha Hauer92aa6742006-06-22 07:11:13 +0200938 will be called netx-eth.
939
Anant Golea6286ee2009-05-18 15:19:01 -0700940config TI_DAVINCI_EMAC
941 tristate "TI DaVinci EMAC Support"
Sriramakrishnan8ee2bf92009-11-19 15:58:25 +0530942 depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
Anant Golea6286ee2009-05-18 15:19:01 -0700943 select PHYLIB
944 help
945 This driver supports TI's DaVinci Ethernet .
946
947 To compile this driver as a module, choose M here: the module
948 will be called davinci_emac_driver. This is recommended.
949
Sascha Hauera1365272005-05-05 15:14:15 -0700950config DM9000
951 tristate "DM9000 support"
Alex Landauf40d24d2007-07-12 12:11:48 +0800952 depends on ARM || BLACKFIN || MIPS
Sascha Hauera1365272005-05-05 15:14:15 -0700953 select CRC32
954 select MII
955 ---help---
956 Support for DM9000 chipset.
957
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800958 To compile this driver as a module, choose M here. The module
959 will be called dm9000.
Sascha Hauera1365272005-05-05 15:14:15 -0700960
Ben Dooks485ca222008-06-24 22:16:06 +0100961config DM9000_DEBUGLEVEL
962 int "DM9000 maximum debug level"
963 depends on DM9000
964 default 4
965 help
966 The maximum level of debugging code compiled into the DM9000
967 driver.
968
Ben Dooksf8dd0ec2008-06-24 22:16:04 +0100969config DM9000_FORCE_SIMPLE_PHY_POLL
970 bool "Force simple NSR based PHY polling"
971 depends on DM9000
972 ---help---
973 This configuration forces the DM9000 to use the NSR's LinkStatus
974 bit to determine if the link is up or down instead of the more
975 costly MII PHY reads. Note, this will not work if the chip is
976 operating with an external PHY.
977
Claudio Lanconelli3ec9c112008-01-14 11:00:28 +0100978config ENC28J60
979 tristate "ENC28J60 support"
980 depends on EXPERIMENTAL && SPI && NET_ETHERNET
981 select CRC32
982 ---help---
983 Support for the Microchip EN28J60 ethernet chip.
984
Johann Felix Soden2bfc79d2008-02-05 03:13:58 -0800985 To compile this driver as a module, choose M here. The module will be
Claudio Lanconelli3ec9c112008-01-14 11:00:28 +0100986 called enc28j60.
987
988config ENC28J60_WRITEVERIFY
989 bool "Enable write verify"
990 depends on ENC28J60
991 ---help---
992 Enable the verify after the buffer write useful for debugging purpose.
993 If unsure, say N.
994
Thierry Redinga1702852009-03-27 00:12:24 -0700995config ETHOC
996 tristate "OpenCores 10/100 Mbps Ethernet MAC support"
Geert Uytterhoeven0ebe74e2009-11-20 09:19:10 +0000997 depends on NET_ETHERNET && HAS_IOMEM && HAS_DMA
Thierry Redinga1702852009-03-27 00:12:24 -0700998 select MII
999 select PHYLIB
Randy Dunlapc5cacb32009-04-08 15:41:25 -07001000 select CRC32
1001 select BITREVERSE
Thierry Redinga1702852009-03-27 00:12:24 -07001002 help
1003 Say Y here if you want to use the OpenCores 10/100 Mbps Ethernet MAC.
1004
Kristoffer Glembod4c41132010-02-15 03:33:44 +00001005config GRETH
1006 tristate "Aeroflex Gaisler GRETH Ethernet MAC support"
David S. Millercf261b22010-02-18 23:32:26 -08001007 depends on SPARC
Kristoffer Glembod4c41132010-02-15 03:33:44 +00001008 select PHYLIB
1009 select CRC32
1010 help
1011 Say Y here if you want to use the Aeroflex Gaisler GRETH Ethernet MAC.
1012
Dustin McIntire0a0c72c2006-04-19 20:24:51 -07001013config SMC911X
1014 tristate "SMSC LAN911[5678] support"
1015 select CRC32
1016 select MII
Catalin Marinasbd2c4972008-10-20 18:15:17 +01001017 depends on ARM || SUPERH
Dustin McIntire0a0c72c2006-04-19 20:24:51 -07001018 help
1019 This is a driver for SMSC's LAN911x series of Ethernet chipsets
1020 including the new LAN9115, LAN9116, LAN9117, and LAN9118.
1021 Say Y if you want it compiled into the kernel,
1022 and read the Ethernet-HOWTO, available from
1023 <http://www.linuxdoc.org/docs.html#howto>.
1024
1025 This driver is also available as a module. The module will be
1026 called smc911x. If you want to compile it as a module, say M
Alexander E. Patrakov39f5fb32007-03-16 18:28:43 +05001027 here and read <file:Documentation/kbuild/modules.txt>
Dustin McIntire0a0c72c2006-04-19 20:24:51 -07001028
Steve Glendinningfd9abb32008-11-05 00:35:37 +00001029config SMSC911X
1030 tristate "SMSC LAN911x/LAN921x families embedded ethernet support"
Manuel Laussb4efc562009-10-13 07:25:48 +00001031 depends on ARM || SUPERH || BLACKFIN || MIPS
Steve Glendinningfd9abb32008-11-05 00:35:37 +00001032 select CRC32
1033 select MII
1034 select PHYLIB
1035 ---help---
1036 Say Y here if you want support for SMSC LAN911x and LAN921x families
1037 of ethernet controllers.
1038
1039 To compile this driver as a module, choose M here and read
1040 <file:Documentation/networking/net-modules.txt>. The module
1041 will be called smsc911x.
1042
Linus Torvalds1da177e2005-04-16 15:20:36 -07001043config NET_VENDOR_RACAL
1044 bool "Racal-Interlan (Micom) NI cards"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001045 depends on ISA
Linus Torvalds1da177e2005-04-16 15:20:36 -07001046 help
1047 If you have a network (Ethernet) card belonging to this class, such
1048 as the NI5010, NI5210 or NI6210, say Y and read the Ethernet-HOWTO,
1049 available from <http://www.tldp.org/docs.html#howto>.
1050
1051 Note that the answer to this question doesn't directly affect the
1052 kernel: saying N will just cause the configurator to skip all
1053 the questions about NI cards. If you say Y, you will be asked for
1054 your specific card in the following questions.
1055
1056config NI5010
1057 tristate "NI5010 support (EXPERIMENTAL)"
1058 depends on NET_VENDOR_RACAL && ISA && EXPERIMENTAL && BROKEN_ON_SMP
1059 ---help---
1060 If you have a network (Ethernet) card of this type, say Y and read
1061 the Ethernet-HOWTO, available from
1062 <http://www.tldp.org/docs.html#howto>. Note that this is still
1063 experimental code.
1064
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001065 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001066 will be called ni5010.
1067
1068config NI52
1069 tristate "NI5210 support"
1070 depends on NET_VENDOR_RACAL && ISA
1071 help
1072 If you have a network (Ethernet) card of this type, say Y and read
1073 the Ethernet-HOWTO, available from
1074 <http://www.tldp.org/docs.html#howto>.
1075
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001076 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001077 will be called ni52.
1078
1079config NI65
1080 tristate "NI6510 support"
Al Viroa5532602005-05-04 05:39:42 +01001081 depends on NET_VENDOR_RACAL && ISA && ISA_DMA_API
Linus Torvalds1da177e2005-04-16 15:20:36 -07001082 help
1083 If you have a network (Ethernet) card of this type, say Y and read
1084 the Ethernet-HOWTO, available from
1085 <http://www.tldp.org/docs.html#howto>.
1086
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001087 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001088 will be called ni65.
1089
Ilya Yanok47964172009-03-11 23:26:02 -07001090config DNET
1091 tristate "Dave ethernet support (DNET)"
Ilya Yanok4b979262009-03-21 16:58:47 -07001092 depends on NET_ETHERNET && HAS_IOMEM
Ilya Yanok47964172009-03-11 23:26:02 -07001093 select PHYLIB
1094 help
1095 The Dave ethernet interface (DNET) is found on Qong Board FPGA.
1096 Say Y to include support for the DNET chip.
1097
1098 To compile this driver as a module, choose M here: the module
1099 will be called dnet.
1100
Linus Torvalds1da177e2005-04-16 15:20:36 -07001101source "drivers/net/tulip/Kconfig"
1102
1103config AT1700
1104 tristate "AT1700/1720 support (EXPERIMENTAL)"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001105 depends on (ISA || MCA_LEGACY) && EXPERIMENTAL
Linus Torvalds1da177e2005-04-16 15:20:36 -07001106 select CRC32
1107 ---help---
1108 If you have a network (Ethernet) card of this type, say Y and read
1109 the Ethernet-HOWTO, available from
1110 <http://www.tldp.org/docs.html#howto>.
1111
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001112 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001113 will be called at1700.
1114
1115config DEPCA
1116 tristate "DEPCA, DE10x, DE200, DE201, DE202, DE422 support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001117 depends on ISA || EISA || MCA
Linus Torvalds1da177e2005-04-16 15:20:36 -07001118 select CRC32
1119 ---help---
1120 If you have a network (Ethernet) card of this type, say Y and read
1121 the Ethernet-HOWTO, available from
1122 <http://www.tldp.org/docs.html#howto> as well as
1123 <file:drivers/net/depca.c>.
1124
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001125 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001126 will be called depca.
1127
1128config HP100
1129 tristate "HP 10/100VG PCLAN (ISA, EISA, PCI) support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001130 depends on ISA || EISA || PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -07001131 help
1132 If you have a network (Ethernet) card of this type, say Y and read
1133 the Ethernet-HOWTO, available from
1134 <http://www.tldp.org/docs.html#howto>.
1135
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001136 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001137 will be called hp100.
1138
1139config NET_ISA
1140 bool "Other ISA cards"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001141 depends on ISA
Linus Torvalds1da177e2005-04-16 15:20:36 -07001142 ---help---
1143 If your network (Ethernet) card hasn't been mentioned yet and its
1144 bus system (that's the way the cards talks to the other components
1145 of your computer) is ISA (as opposed to EISA, VLB or PCI), say Y.
1146 Make sure you know the name of your card. Read the Ethernet-HOWTO,
1147 available from <http://www.tldp.org/docs.html#howto>.
1148
1149 If unsure, say Y.
1150
1151 Note that the answer to this question doesn't directly affect the
1152 kernel: saying N will just cause the configurator to skip all
1153 the remaining ISA network card questions. If you say Y, you will be
1154 asked for your specific card in the following questions.
1155
1156config E2100
1157 tristate "Cabletron E21xx support"
1158 depends on NET_ISA
1159 select CRC32
1160 help
1161 If you have a network (Ethernet) card of this type, say Y and read
1162 the Ethernet-HOWTO, available from
1163 <http://www.tldp.org/docs.html#howto>.
1164
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001165 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001166 will be called e2100.
1167
1168config EWRK3
1169 tristate "EtherWORKS 3 (DE203, DE204, DE205) support"
1170 depends on NET_ISA
1171 select CRC32
1172 ---help---
1173 This driver supports the DE203, DE204 and DE205 network (Ethernet)
1174 cards. If this is for you, say Y and read
1175 <file:Documentation/networking/ewrk3.txt> in the kernel source as
1176 well as the Ethernet-HOWTO, available from
1177 <http://www.tldp.org/docs.html#howto>.
1178
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001179 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001180 will be called ewrk3.
1181
1182config EEXPRESS
1183 tristate "EtherExpress 16 support"
1184 depends on NET_ISA
1185 ---help---
1186 If you have an EtherExpress16 network (Ethernet) card, say Y and
1187 read the Ethernet-HOWTO, available from
1188 <http://www.tldp.org/docs.html#howto>. Note that the Intel
1189 EtherExpress16 card used to be regarded as a very poor choice
1190 because the driver was very unreliable. We now have a new driver
1191 that should do better.
1192
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001193 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001194 will be called eexpress.
1195
1196config EEXPRESS_PRO
1197 tristate "EtherExpressPro support/EtherExpress 10 (i82595) support"
1198 depends on NET_ISA
1199 ---help---
1200 If you have a network (Ethernet) card of this type, say Y. This
Jon Mason47c51432006-02-12 11:53:04 -06001201 driver supports Intel i82595{FX,TX} based boards. Note however
Linus Torvalds1da177e2005-04-16 15:20:36 -07001202 that the EtherExpress PRO/100 Ethernet card has its own separate
1203 driver. Please read the Ethernet-HOWTO, available from
1204 <http://www.tldp.org/docs.html#howto>.
1205
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001206 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001207 will be called eepro.
1208
Linus Torvalds1da177e2005-04-16 15:20:36 -07001209config HPLAN_PLUS
1210 tristate "HP PCLAN+ (27247B and 27252A) support"
1211 depends on NET_ISA
1212 select CRC32
1213 help
1214 If you have a network (Ethernet) card of this type, say Y and read
1215 the Ethernet-HOWTO, available from
1216 <http://www.tldp.org/docs.html#howto>.
1217
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001218 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001219 will be called hp-plus.
1220
1221config HPLAN
1222 tristate "HP PCLAN (27245 and other 27xxx series) support"
1223 depends on NET_ISA
1224 select CRC32
1225 help
1226 If you have a network (Ethernet) card of this type, say Y and read
1227 the Ethernet-HOWTO, available from
1228 <http://www.tldp.org/docs.html#howto>.
1229
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001230 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001231 will be called hp.
1232
1233config LP486E
1234 tristate "LP486E on board Ethernet"
1235 depends on NET_ISA
1236 help
1237 Say Y here to support the 82596-based on-board Ethernet controller
1238 for the Panther motherboard, which is one of the two shipped in the
1239 Intel Professional Workstation.
1240
1241config ETH16I
1242 tristate "ICL EtherTeam 16i/32 support"
1243 depends on NET_ISA
1244 help
1245 If you have a network (Ethernet) card of this type, say Y and read
1246 the Ethernet-HOWTO, available from
1247 <http://www.tldp.org/docs.html#howto>.
1248
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001249 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001250 will be called eth16i.
1251
1252config NE2000
1253 tristate "NE2000/NE1000 support"
Atsushi Nemotoc7e65c12008-08-08 00:55:17 +09001254 depends on NET_ISA || (Q40 && m) || M32R || MACH_TX49XX
Linus Torvalds1da177e2005-04-16 15:20:36 -07001255 select CRC32
1256 ---help---
1257 If you have a network (Ethernet) card of this type, say Y and read
1258 the Ethernet-HOWTO, available from
1259 <http://www.tldp.org/docs.html#howto>. Many Ethernet cards
1260 without a specific driver are compatible with NE2000.
1261
1262 If you have a PCI NE2000 card however, say N here and Y to "PCI
Jesper Juhl28beaf62006-03-08 00:06:31 -08001263 NE2000 and clone support" under "EISA, VLB, PCI and on board
1264 controllers" below. If you have a NE2000 card and are running on
Linus Torvalds1da177e2005-04-16 15:20:36 -07001265 an MCA system (a bus system used on some IBM PS/2 computers and
1266 laptops), say N here and Y to "NE/2 (ne2000 MCA version) support",
1267 below.
1268
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001269 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001270 will be called ne.
1271
1272config ZNET
1273 tristate "Zenith Z-Note support (EXPERIMENTAL)"
Al Viroa5532602005-05-04 05:39:42 +01001274 depends on NET_ISA && EXPERIMENTAL && ISA_DMA_API
Linus Torvalds1da177e2005-04-16 15:20:36 -07001275 help
1276 The Zenith Z-Note notebook computer has a built-in network
1277 (Ethernet) card, and this is the Linux driver for it. Note that the
1278 IBM Thinkpad 300 is compatible with the Z-Note and is also supported
1279 by this driver. Read the Ethernet-HOWTO, available from
1280 <http://www.tldp.org/docs.html#howto>.
1281
1282config SEEQ8005
1283 tristate "SEEQ8005 support (EXPERIMENTAL)"
1284 depends on NET_ISA && EXPERIMENTAL
1285 help
1286 This is a driver for the SEEQ 8005 network (Ethernet) card. If this
1287 is for you, read the Ethernet-HOWTO, available from
1288 <http://www.tldp.org/docs.html#howto>.
1289
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001290 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001291 will be called seeq8005.
1292
Linus Torvalds1da177e2005-04-16 15:20:36 -07001293config NE2_MCA
1294 tristate "NE/2 (ne2000 MCA version) support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001295 depends on MCA_LEGACY
Linus Torvalds1da177e2005-04-16 15:20:36 -07001296 select CRC32
1297 help
1298 If you have a network (Ethernet) card of this type, say Y and read
1299 the Ethernet-HOWTO, available from
1300 <http://www.tldp.org/docs.html#howto>.
1301
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001302 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001303 will be called ne2.
1304
1305config IBMLANA
1306 tristate "IBM LAN Adapter/A support"
Adrian Bunke6353f32008-01-30 22:02:35 +02001307 depends on MCA
Linus Torvalds1da177e2005-04-16 15:20:36 -07001308 ---help---
1309 This is a Micro Channel Ethernet adapter. You need to set
1310 CONFIG_MCA to use this driver. It is both available as an in-kernel
1311 driver and as a module.
1312
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001313 To compile this driver as a module, choose M here. The only
Linus Torvalds1da177e2005-04-16 15:20:36 -07001314 currently supported card is the IBM LAN Adapter/A for Ethernet. It
1315 will both support 16K and 32K memory windows, however a 32K window
1316 gives a better security against packet losses. Usage of multiple
1317 boards with this driver should be possible, but has not been tested
1318 up to now due to lack of hardware.
1319
1320config IBMVETH
1321 tristate "IBM LAN Virtual Ethernet support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001322 depends on PPC_PSERIES
Linus Torvalds1da177e2005-04-16 15:20:36 -07001323 ---help---
1324 This driver supports virtual ethernet adapters on newer IBM iSeries
1325 and pSeries systems.
1326
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001327 To compile this driver as a module, choose M here. The module will
Linus Torvalds1da177e2005-04-16 15:20:36 -07001328 be called ibmveth.
1329
David Gibson1d3bb992007-08-23 13:56:01 +10001330source "drivers/net/ibm_newemac/Kconfig"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001331
1332config NET_PCI
1333 bool "EISA, VLB, PCI and on board controllers"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001334 depends on ISA || EISA || PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -07001335 help
1336 This is another class of network cards which attach directly to the
1337 bus. If you have one of those, say Y and read the Ethernet-HOWTO,
1338 available from <http://www.tldp.org/docs.html#howto>.
1339
1340 Note that the answer to this question doesn't directly affect the
1341 kernel: saying N will just cause the configurator to skip all
1342 the questions about this class of network cards. If you say Y, you
1343 will be asked for your specific card in the following questions. If
1344 you are unsure, say Y.
1345
1346config PCNET32
1347 tristate "AMD PCnet32 PCI support"
1348 depends on NET_PCI && PCI
1349 select CRC32
1350 select MII
1351 help
1352 If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
1353 answer Y here and read the Ethernet-HOWTO, available from
1354 <http://www.tldp.org/docs.html#howto>.
1355
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001356 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001357 will be called pcnet32.
1358
1359config AMD8111_ETH
1360 tristate "AMD 8111 (new PCI lance) support"
1361 depends on NET_PCI && PCI
1362 select CRC32
1363 select MII
1364 help
1365 If you have an AMD 8111-based PCI lance ethernet card,
1366 answer Y here and read the Ethernet-HOWTO, available from
1367 <http://www.tldp.org/docs.html#howto>.
1368
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001369 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001370 will be called amd8111e.
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001371
Linus Torvalds1da177e2005-04-16 15:20:36 -07001372config ADAPTEC_STARFIRE
1373 tristate "Adaptec Starfire/DuraLAN support"
1374 depends on NET_PCI && PCI
1375 select CRC32
1376 select MII
1377 help
1378 Say Y here if you have an Adaptec Starfire (or DuraLAN) PCI network
1379 adapter. The DuraLAN chip is used on the 64 bit PCI boards from
1380 Adaptec e.g. the ANA-6922A. The older 32 bit boards use the tulip
1381 driver.
1382
1383 To compile this driver as a module, choose M here: the module
1384 will be called starfire. This is recommended.
1385
Linus Torvalds1da177e2005-04-16 15:20:36 -07001386config AC3200
1387 tristate "Ansel Communications EISA 3200 support (EXPERIMENTAL)"
1388 depends on NET_PCI && (ISA || EISA) && EXPERIMENTAL
1389 select CRC32
1390 help
1391 If you have a network (Ethernet) card of this type, say Y and read
1392 the Ethernet-HOWTO, available from
1393 <http://www.tldp.org/docs.html#howto>.
1394
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001395 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001396 will be called ac3200.
1397
Tristram Ha1eb1cc72010-02-08 11:38:28 +00001398config KSZ884X_PCI
1399 tristate "Micrel KSZ8841/2 PCI"
1400 depends on NET_PCI && PCI
1401 select MII
1402 select CRC32
1403 help
1404 This PCI driver is for Micrel KSZ8841/KSZ8842 PCI Ethernet chip.
1405
1406 To compile this driver as a module, choose M here. The module
1407 will be called ksz884x.
1408
Linus Torvalds1da177e2005-04-16 15:20:36 -07001409config APRICOT
1410 tristate "Apricot Xen-II on board Ethernet"
1411 depends on NET_PCI && ISA
1412 help
1413 If you have a network (Ethernet) controller of this type, say Y and
1414 read the Ethernet-HOWTO, available from
1415 <http://www.tldp.org/docs.html#howto>.
1416
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001417 To compile this driver as a module, choose M here. The module
1418 will be called apricot.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001419
1420config B44
Michael Buesch753f4922007-09-19 14:20:30 -07001421 tristate "Broadcom 440x/47xx ethernet support"
Al Viro46cb69c2008-05-21 06:32:11 +01001422 depends on SSB_POSSIBLE && HAS_DMA
Michael Buesch753f4922007-09-19 14:20:30 -07001423 select SSB
Linus Torvalds1da177e2005-04-16 15:20:36 -07001424 select MII
1425 help
Michael Buesch753f4922007-09-19 14:20:30 -07001426 If you have a network (Ethernet) controller of this type, say Y
1427 or M and read the Ethernet-HOWTO, available from
Linus Torvalds1da177e2005-04-16 15:20:36 -07001428 <http://www.tldp.org/docs.html#howto>.
1429
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001430 To compile this driver as a module, choose M here. The module
1431 will be called b44.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001432
Michael Buesch753f4922007-09-19 14:20:30 -07001433# Auto-select SSB PCI-HOST support, if possible
1434config B44_PCI_AUTOSELECT
1435 bool
1436 depends on B44 && SSB_PCIHOST_POSSIBLE
1437 select SSB_PCIHOST
1438 default y
1439
1440# Auto-select SSB PCICORE driver, if possible
1441config B44_PCICORE_AUTOSELECT
1442 bool
1443 depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE
1444 select SSB_DRIVER_PCICORE
1445 default y
1446
1447config B44_PCI
1448 bool
1449 depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
1450 default y
1451
Linus Torvalds1da177e2005-04-16 15:20:36 -07001452config FORCEDETH
Adrian Bunk82770082006-03-08 00:06:30 -08001453 tristate "nForce Ethernet support"
1454 depends on NET_PCI && PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -07001455 help
1456 If you have a network (Ethernet) controller of this type, say Y and
1457 read the Ethernet-HOWTO, available from
1458 <http://www.tldp.org/docs.html#howto>.
1459
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001460 To compile this driver as a module, choose M here. The module
1461 will be called forcedeth.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001462
Linus Torvalds1da177e2005-04-16 15:20:36 -07001463config CS89x0
1464 tristate "CS89x0 support"
Gilles Chanteperdrix0ac4ed92008-09-26 15:44:43 +01001465 depends on NET_ETHERNET && (ISA || EISA || MACH_IXDP2351 \
1466 || ARCH_IXDP2X01 || ARCH_PNX010X || MACH_MX31ADS)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001467 ---help---
1468 Support for CS89x0 chipset based Ethernet cards. If you have a
1469 network (Ethernet) card of this type, say Y and read the
1470 Ethernet-HOWTO, available from
1471 <http://www.tldp.org/docs.html#howto> as well as
1472 <file:Documentation/networking/cs89x0.txt>.
1473
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001474 To compile this driver as a module, choose M here. The module
1475 will be called cs89x0.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001476
Gilles Chanteperdrix0ac4ed92008-09-26 15:44:43 +01001477config CS89x0_NONISA_IRQ
1478 def_bool y
1479 depends on CS89x0 != n
1480 depends on MACH_IXDP2351 || ARCH_IXDP2X01 || ARCH_PNX010X || MACH_MX31ADS
1481
Linus Torvalds1da177e2005-04-16 15:20:36 -07001482config TC35815
1483 tristate "TOSHIBA TC35815 Ethernet support"
Atsushi Nemotoeea221ce2007-03-03 23:54:59 +09001484 depends on NET_PCI && PCI && MIPS
Atsushi Nemotoc6686fe2008-04-12 00:47:46 +09001485 select PHYLIB
Linus Torvalds1da177e2005-04-16 15:20:36 -07001486
Linus Torvalds1da177e2005-04-16 15:20:36 -07001487config E100
1488 tristate "Intel(R) PRO/100+ support"
1489 depends on NET_PCI && PCI
1490 select MII
1491 ---help---
1492 This driver supports Intel(R) PRO/100 family of adapters.
1493 To verify that your adapter is supported, find the board ID number
1494 on the adapter. Look for a label that has a barcode and a number
1495 in the format 123456-001 (six digits hyphen three digits).
1496
1497 Use the above information and the Adapter & Driver ID Guide at:
1498
1499 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
1500
1501 to identify the adapter.
1502
1503 For the latest Intel PRO/100 network driver for Linux, see:
1504
1505 <http://appsr.intel.com/scripts-df/support_intel.asp>
1506
1507 More specific information on configuring the driver is in
1508 <file:Documentation/networking/e100.txt>.
1509
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001510 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001511 will be called e100.
1512
1513config LNE390
1514 tristate "Mylex EISA LNE390A/B support (EXPERIMENTAL)"
1515 depends on NET_PCI && EISA && EXPERIMENTAL
1516 select CRC32
1517 help
1518 If you have a network (Ethernet) card of this type, say Y and read
1519 the Ethernet-HOWTO, available from
1520 <http://www.tldp.org/docs.html#howto>.
1521
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001522 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001523 will be called lne390.
1524
1525config FEALNX
1526 tristate "Myson MTD-8xx PCI Ethernet support"
1527 depends on NET_PCI && PCI
1528 select CRC32
1529 select MII
1530 help
1531 Say Y here to support the Mysom MTD-800 family of PCI-based Ethernet
1532 cards. Specifications and data at
1533 <http://www.myson.com.hk/mtd/datasheet/>.
1534
1535config NATSEMI
1536 tristate "National Semiconductor DP8381x series PCI Ethernet support"
1537 depends on NET_PCI && PCI
1538 select CRC32
1539 help
1540 This driver is for the National Semiconductor DP83810 series,
1541 which is used in cards from PureData, NetGear, Linksys
1542 and others, including the 83815 chip.
1543 More specific information and updates are available from
1544 <http://www.scyld.com/network/natsemi.html>.
1545
1546config NE2K_PCI
1547 tristate "PCI NE2000 and clones support (see help)"
1548 depends on NET_PCI && PCI
1549 select CRC32
1550 ---help---
1551 This driver is for NE2000 compatible PCI cards. It will not work
1552 with ISA NE2000 cards (they have their own driver, "NE2000/NE1000
1553 support" below). If you have a PCI NE2000 network (Ethernet) card,
1554 say Y and read the Ethernet-HOWTO, available from
1555 <http://www.tldp.org/docs.html#howto>.
1556
1557 This driver also works for the following NE2000 clone cards:
1558 RealTek RTL-8029 Winbond 89C940 Compex RL2000 KTI ET32P2
1559 NetVin NV5000SC Via 86C926 SureCom NE34 Winbond
1560 Holtek HT80232 Holtek HT80229
1561
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001562 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001563 will be called ne2k-pci.
1564
1565config NE3210
1566 tristate "Novell/Eagle/Microdyne NE3210 EISA support (EXPERIMENTAL)"
1567 depends on NET_PCI && EISA && EXPERIMENTAL
1568 select CRC32
1569 ---help---
1570 If you have a network (Ethernet) card of this type, say Y and read
1571 the Ethernet-HOWTO, available from
1572 <http://www.tldp.org/docs.html#howto>. Note that this driver
1573 will NOT WORK for NE3200 cards as they are completely different.
1574
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001575 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001576 will be called ne3210.
1577
1578config ES3210
1579 tristate "Racal-Interlan EISA ES3210 support (EXPERIMENTAL)"
1580 depends on NET_PCI && EISA && EXPERIMENTAL
1581 select CRC32
1582 help
1583 If you have a network (Ethernet) card of this type, say Y and read
1584 the Ethernet-HOWTO, available from
1585 <http://www.tldp.org/docs.html#howto>.
1586
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001587 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001588 will be called es3210.
1589
1590config 8139CP
1591 tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support (EXPERIMENTAL)"
1592 depends on NET_PCI && PCI && EXPERIMENTAL
1593 select CRC32
1594 select MII
1595 help
1596 This is a driver for the Fast Ethernet PCI network cards based on
1597 the RTL8139C+ chips. If you have one of those, say Y and read
1598 the Ethernet-HOWTO, available from
1599 <http://www.tldp.org/docs.html#howto>.
1600
1601 To compile this driver as a module, choose M here: the module
1602 will be called 8139cp. This is recommended.
1603
1604config 8139TOO
Adrian Bunkf04e3f02005-05-16 21:13:03 +02001605 tristate "RealTek RTL-8129/8130/8139 PCI Fast Ethernet Adapter support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001606 depends on NET_PCI && PCI
1607 select CRC32
1608 select MII
1609 ---help---
1610 This is a driver for the Fast Ethernet PCI network cards based on
Adrian Bunkf04e3f02005-05-16 21:13:03 +02001611 the RTL 8129/8130/8139 chips. If you have one of those, say Y and
1612 read the Ethernet-HOWTO <http://www.tldp.org/docs.html#howto>.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001613
1614 To compile this driver as a module, choose M here: the module
1615 will be called 8139too. This is recommended.
1616
1617config 8139TOO_PIO
1618 bool "Use PIO instead of MMIO"
1619 default y
1620 depends on 8139TOO
1621 help
1622 This instructs the driver to use programmed I/O ports (PIO) instead
1623 of PCI shared memory (MMIO). This can possibly solve some problems
1624 in case your mainboard has memory consistency issues. If unsure,
1625 say N.
1626
1627config 8139TOO_TUNE_TWISTER
1628 bool "Support for uncommon RTL-8139 rev. K (automatic channel equalization)"
1629 depends on 8139TOO
1630 help
1631 This implements a function which might come in handy in case you
1632 are using low quality on long cabling. It is required for RealTek
1633 RTL-8139 revision K boards, and totally unused otherwise. It tries
1634 to match the transceiver to the cable characteristics. This is
1635 experimental since hardly documented by the manufacturer.
1636 If unsure, say Y.
1637
1638config 8139TOO_8129
1639 bool "Support for older RTL-8129/8130 boards"
1640 depends on 8139TOO
1641 help
1642 This enables support for the older and uncommon RTL-8129 and
1643 RTL-8130 chips, which support MII via an external transceiver,
1644 instead of an internal one. Disabling this option will save some
1645 memory by making the code size smaller. If unsure, say Y.
1646
1647config 8139_OLD_RX_RESET
1648 bool "Use older RX-reset method"
1649 depends on 8139TOO
1650 help
1651 The 8139too driver was recently updated to contain a more rapid
1652 reset sequence, in the face of severe receive errors. This "new"
1653 RX-reset method should be adequate for all boards. But if you
1654 experience problems, you can enable this option to restore the
1655 old RX-reset behavior. If unsure, say N.
1656
Sten Wang7a47dd72007-11-12 21:31:11 -08001657config R6040
Florian Fainelli68334112009-01-08 15:04:50 +00001658 tristate "RDC R6040 Fast Ethernet Adapter support"
Sten Wang7a47dd72007-11-12 21:31:11 -08001659 depends on NET_PCI && PCI
1660 select CRC32
1661 select MII
1662 help
1663 This is a driver for the R6040 Fast Ethernet MACs found in the
1664 the RDC R-321x System-on-chips.
1665
1666 To compile this driver as a module, choose M here: the module
1667 will be called r6040. This is recommended.
1668
Linus Torvalds1da177e2005-04-16 15:20:36 -07001669config SIS900
1670 tristate "SiS 900/7016 PCI Fast Ethernet Adapter support"
1671 depends on NET_PCI && PCI
1672 select CRC32
Adrian Bunk6da0f682005-04-30 13:52:49 +02001673 select MII
Linus Torvalds1da177e2005-04-16 15:20:36 -07001674 ---help---
1675 This is a driver for the Fast Ethernet PCI network cards based on
1676 the SiS 900 and SiS 7016 chips. The SiS 900 core is also embedded in
Adrian Bunkc3cf5602006-03-04 17:07:57 +01001677 SiS 630 and SiS 540 chipsets.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001678
1679 This driver also supports AMD 79C901 HomePNA so that you can use
1680 your phone line as a network cable.
1681
1682 To compile this driver as a module, choose M here: the module
1683 will be called sis900. This is recommended.
1684
1685config EPIC100
1686 tristate "SMC EtherPower II"
1687 depends on NET_PCI && PCI
1688 select CRC32
1689 select MII
1690 help
1691 This driver is for the SMC EtherPower II 9432 PCI Ethernet NIC,
1692 which is based on the SMC83c17x (EPIC/100).
1693 More specific information and updates are available from
1694 <http://www.scyld.com/network/epic100.html>.
1695
Steve Glendinning2cb37722008-12-11 20:54:30 -08001696config SMSC9420
1697 tristate "SMSC LAN9420 PCI ethernet adapter support"
1698 depends on NET_PCI && PCI
1699 select CRC32
1700 select PHYLIB
1701 select SMSC_PHY
1702 help
1703 This is a driver for SMSC's LAN9420 PCI ethernet adapter.
1704 Say Y if you want it compiled into the kernel,
1705 and read the Ethernet-HOWTO, available from
1706 <http://www.linuxdoc.org/docs.html#howto>.
1707
1708 This driver is also available as a module. The module will be
1709 called smsc9420. If you want to compile it as a module, say M
1710 here and read <file:Documentation/kbuild/modules.txt>
1711
Linus Torvalds1da177e2005-04-16 15:20:36 -07001712config SUNDANCE
1713 tristate "Sundance Alta support"
1714 depends on NET_PCI && PCI
1715 select CRC32
1716 select MII
1717 help
1718 This driver is for the Sundance "Alta" chip.
1719 More specific information and updates are available from
1720 <http://www.scyld.com/network/sundance.html>.
1721
1722config SUNDANCE_MMIO
1723 bool "Use MMIO instead of PIO"
1724 depends on SUNDANCE
1725 help
1726 Enable memory-mapped I/O for interaction with Sundance NIC registers.
1727 Do NOT enable this by default, PIO (enabled when MMIO is disabled)
1728 is known to solve bugs on certain chips.
1729
1730 If unsure, say N.
1731
1732config TLAN
1733 tristate "TI ThunderLAN support"
Stephen Hemminger93e16842008-05-30 09:49:55 -07001734 depends on NET_PCI && (PCI || EISA)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001735 ---help---
1736 If you have a PCI Ethernet network card based on the ThunderLAN chip
1737 which is supported by this driver, say Y and read the
1738 Ethernet-HOWTO, available from
1739 <http://www.tldp.org/docs.html#howto>.
1740
1741 Devices currently supported by this driver are Compaq Netelligent,
1742 Compaq NetFlex and Olicom cards. Please read the file
1743 <file:Documentation/networking/tlan.txt> for more details.
1744
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001745 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001746 will be called tlan.
1747
1748 Please email feedback to <torben.mathiasen@compaq.com>.
1749
Richard Ršöjforsb07878e2009-06-04 03:35:55 +00001750config KS8842
1751 tristate "Micrel KSZ8842"
Heiko Carstens0cf08dc2009-06-22 21:32:18 +00001752 depends on HAS_IOMEM
Richard Ršöjforsb07878e2009-06-04 03:35:55 +00001753 help
Andreas Mohrc1893082009-08-21 00:46:06 +00001754 This platform driver is for Micrel KSZ8842 / KS8842
1755 2-port ethernet switch chip (managed, VLAN, QoS).
Richard Ršöjforsb07878e2009-06-04 03:35:55 +00001756
Ben Dooks3ba81f32009-07-16 05:24:08 +00001757config KS8851
1758 tristate "Micrel KS8851 SPI"
1759 depends on SPI
Alexander Beregalovde72e5d2009-07-22 01:16:51 +00001760 select MII
Randy Dunlapcbb35f8a2009-08-19 12:13:31 -07001761 select CRC32
Ben Dooks3ba81f32009-07-16 05:24:08 +00001762 help
1763 SPI driver for Micrel KS8851 SPI attached network chip.
1764
Choi, Davida55c0a0e2009-09-25 14:42:12 +00001765config KS8851_MLL
1766 tristate "Micrel KS8851 MLL"
1767 depends on HAS_IOMEM
Randy Dunlap47a01a02009-10-14 15:10:58 -07001768 select MII
Choi, Davida55c0a0e2009-09-25 14:42:12 +00001769 help
1770 This platform driver is for Micrel KS8851 Address/data bus
1771 multiplexed network chip.
1772
Linus Torvalds1da177e2005-04-16 15:20:36 -07001773config VIA_RHINE
1774 tristate "VIA Rhine support"
1775 depends on NET_PCI && PCI
1776 select CRC32
1777 select MII
1778 help
1779 If you have a VIA "Rhine" based network card (Rhine-I (VT86C100A),
1780 Rhine-II (VT6102), or Rhine-III (VT6105)), say Y here. Rhine-type
1781 Ethernet functions can also be found integrated on South Bridges
1782 (e.g. VT8235).
1783
1784 To compile this driver as a module, choose M here. The module
1785 will be called via-rhine.
1786
1787config VIA_RHINE_MMIO
1788 bool "Use MMIO instead of PIO"
1789 depends on VIA_RHINE
1790 help
1791 This instructs the driver to use PCI shared memory (MMIO) instead of
1792 programmed I/O ports (PIO). Enabling this gives an improvement in
1793 processing time in parts of the driver.
1794
1795 If unsure, say Y.
1796
Cesar Eduardo Barrosbf345702006-12-19 13:08:47 -08001797config SC92031
1798 tristate "Silan SC92031 PCI Fast Ethernet Adapter driver (EXPERIMENTAL)"
1799 depends on NET_PCI && PCI && EXPERIMENTAL
1800 select CRC32
1801 ---help---
1802 This is a driver for the Fast Ethernet PCI network cards based on
1803 the Silan SC92031 chip (sometimes also called Rsltek 8139D). If you
1804 have one of these, say Y here.
1805
1806 To compile this driver as a module, choose M here: the module
1807 will be called sc92031. This is recommended.
1808
Matteo Croced95b39c2007-10-14 18:10:13 +02001809config CPMAC
1810 tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"
Florian Fainelli839b04c2009-08-04 11:17:49 +00001811 depends on NET_ETHERNET && EXPERIMENTAL && AR7
Matteo Croced95b39c2007-10-14 18:10:13 +02001812 select PHYLIB
Matteo Croced95b39c2007-10-14 18:10:13 +02001813 help
1814 TI AR7 CPMAC Ethernet support
1815
Linus Torvalds1da177e2005-04-16 15:20:36 -07001816config NET_POCKET
1817 bool "Pocket and portable adapters"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001818 depends on PARPORT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001819 ---help---
1820 Cute little network (Ethernet) devices which attach to the parallel
1821 port ("pocket adapters"), commonly used with laptops. If you have
1822 one of those, say Y and read the Ethernet-HOWTO, available from
1823 <http://www.tldp.org/docs.html#howto>.
1824
1825 If you want to plug a network (or some other) card into the PCMCIA
1826 (or PC-card) slot of your laptop instead (PCMCIA is the standard for
1827 credit card size extension cards used by all modern laptops), you
1828 need the pcmcia-cs package (location contained in the file
1829 <file:Documentation/Changes>) and you can say N here.
1830
1831 Laptop users should read the Linux Laptop home page at
1832 <http://www.linux-on-laptops.com/> or
1833 Tuxmobil - Linux on Mobile Computers at <http://www.tuxmobil.org/>.
1834
1835 Note that the answer to this question doesn't directly affect the
1836 kernel: saying N will just cause the configurator to skip all
1837 the questions about this class of network devices. If you say Y, you
1838 will be asked for your specific device in the following questions.
1839
1840config ATP
1841 tristate "AT-LAN-TEC/RealTek pocket adapter support"
Grant Coady32fa2bf2005-09-10 00:14:05 +10001842 depends on NET_POCKET && PARPORT && X86
Linus Torvalds1da177e2005-04-16 15:20:36 -07001843 select CRC32
1844 ---help---
1845 This is a network (Ethernet) device which attaches to your parallel
1846 port. Read <file:drivers/net/atp.c> as well as the Ethernet-HOWTO,
1847 available from <http://www.tldp.org/docs.html#howto>, if you
1848 want to use this. If you intend to use this driver, you should have
1849 said N to the "Parallel printer support", because the two drivers
1850 don't like each other.
1851
1852 To compile this driver as a module, choose M here: the module
1853 will be called atp.
1854
1855config DE600
1856 tristate "D-Link DE600 pocket adapter support"
Grant Coady32fa2bf2005-09-10 00:14:05 +10001857 depends on NET_POCKET && PARPORT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001858 ---help---
1859 This is a network (Ethernet) device which attaches to your parallel
1860 port. Read <file:Documentation/networking/DLINK.txt> as well as the
1861 Ethernet-HOWTO, available from
1862 <http://www.tldp.org/docs.html#howto>, if you want to use
1863 this. It is possible to have several devices share a single parallel
1864 port and it is safe to compile the corresponding drivers into the
1865 kernel.
1866
1867 To compile this driver as a module, choose M here: the module
1868 will be called de600.
1869
1870config DE620
1871 tristate "D-Link DE620 pocket adapter support"
Grant Coady32fa2bf2005-09-10 00:14:05 +10001872 depends on NET_POCKET && PARPORT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001873 ---help---
1874 This is a network (Ethernet) device which attaches to your parallel
1875 port. Read <file:Documentation/networking/DLINK.txt> as well as the
1876 Ethernet-HOWTO, available from
1877 <http://www.tldp.org/docs.html#howto>, if you want to use
1878 this. It is possible to have several devices share a single parallel
1879 port and it is safe to compile the corresponding drivers into the
1880 kernel.
1881
1882 To compile this driver as a module, choose M here: the module
1883 will be called de620.
1884
1885config SGISEEQ
1886 tristate "SGI Seeq ethernet controller support"
Thomas Bogendoerfer49b11bc2007-12-19 13:42:36 +01001887 depends on SGI_HAS_SEEQ
Linus Torvalds1da177e2005-04-16 15:20:36 -07001888 help
1889 Say Y here if you have an Seeq based Ethernet network card. This is
1890 used in many Silicon Graphics machines.
1891
1892config DECLANCE
1893 tristate "DEC LANCE ethernet controller support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001894 depends on MACH_DECSTATION
Linus Torvalds1da177e2005-04-16 15:20:36 -07001895 select CRC32
1896 help
1897 This driver is for the series of Ethernet controllers produced by
1898 DEC (now Compaq) based on the AMD Lance chipset, including the
1899 DEPCA series. (This chipset is better known via the NE2100 cards.)
1900
1901config 68360_ENET
1902 bool "Motorola 68360 ethernet controller"
1903 depends on M68360
1904 help
1905 Say Y here if you want to use the built-in ethernet controller of
1906 the Motorola 68360 processor.
1907
1908config FEC
Fabio Estevam64423302009-05-27 03:41:39 +00001909 bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)"
Amit Kucheriabd011e82010-02-05 08:56:22 +00001910 depends on M523x || M527x || M5272 || M528x || M520x || M532x || \
1911 MACH_MX27 || ARCH_MX35 || ARCH_MX25 || ARCH_MX5
Bryan Wue6b043d2010-03-31 02:10:44 +00001912 select PHYLIB
Linus Torvalds1da177e2005-04-16 15:20:36 -07001913 help
1914 Say Y here if you want to use the built-in 10/100 Fast ethernet
Sascha Hauer196719e2009-01-28 23:03:10 +00001915 controller on some Motorola ColdFire and Freescale i.MX processors.
Greg Ungerer2af69212005-09-12 11:18:10 +10001916
1917config FEC2
1918 bool "Second FEC ethernet controller (on some ColdFire CPUs)"
1919 depends on FEC
1920 help
1921 Say Y here if you want to use the second built-in 10/100 Fast
1922 ethernet controller on some Motorola ColdFire processors.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001923
Domen Puncer5d031e92007-10-26 18:07:49 +02001924config FEC_MPC52xx
1925 tristate "MPC52xx FEC driver"
Grant Likely847cdf42008-11-14 05:19:00 -07001926 depends on PPC_MPC52xx && PPC_BESTCOMM
Domen Puncer5d031e92007-10-26 18:07:49 +02001927 select CRC32
1928 select PHYLIB
Grant Likely847cdf42008-11-14 05:19:00 -07001929 select PPC_BESTCOMM_FEC
Domen Puncer5d031e92007-10-26 18:07:49 +02001930 ---help---
1931 This option enables support for the MPC5200's on-chip
1932 Fast Ethernet Controller
Pavel Machek4737f092009-06-05 00:44:53 +02001933 If compiled as module, it will be called fec_mpc52xx.
Domen Puncer5d031e92007-10-26 18:07:49 +02001934
1935config FEC_MPC52xx_MDIO
1936 bool "MPC52xx FEC MDIO bus driver"
1937 depends on FEC_MPC52xx
1938 default y
1939 ---help---
1940 The MPC5200's FEC can connect to the Ethernet either with
1941 an external MII PHY chip or 10 Mbps 7-wire interface
1942 (Motorola? industry standard).
1943 If your board uses an external PHY connected to FEC, enable this.
1944 If not sure, enable.
Pavel Machek4737f092009-06-05 00:44:53 +02001945 If compiled as module, it will be called fec_mpc52xx_phy.
Domen Puncer5d031e92007-10-26 18:07:49 +02001946
Linus Torvalds1da177e2005-04-16 15:20:36 -07001947config NE_H8300
1948 tristate "NE2000 compatible support for H8/300"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001949 depends on H8300
Linus Torvalds1da177e2005-04-16 15:20:36 -07001950 help
1951 Say Y here if you want to use the NE2000 compatible
1952 controller on the Renesas H8/300 processor.
1953
Chris Snook452c1ce2008-09-14 19:56:10 -05001954config ATL2
1955 tristate "Atheros L2 Fast Ethernet support"
1956 depends on PCI
1957 select CRC32
1958 select MII
1959 help
1960 This driver supports the Atheros L2 fast ethernet adapter.
1961
1962 To compile this driver as a module, choose M here. The module
1963 will be called atl2.
1964
John Linnbb81b2d2009-08-20 02:52:16 -07001965config XILINX_EMACLITE
1966 tristate "Xilinx 10/100 Ethernet Lite support"
1967 depends on PPC32 || MICROBLAZE
John Linn5cdaaa12010-02-15 21:51:00 -08001968 select PHYLIB
John Linnbb81b2d2009-08-20 02:52:16 -07001969 help
1970 This driver supports the 10/100 Ethernet Lite from Xilinx.
1971
Maxime Bizon9b1fc552009-08-18 13:23:40 +01001972config BCM63XX_ENET
1973 tristate "Broadcom 63xx internal mac support"
1974 depends on BCM63XX
1975 select MII
1976 select PHYLIB
1977 help
1978 This driver supports the ethernet MACs in the Broadcom 63xx
1979 MIPS chipset family (BCM63XX).
1980
Pantelis Antoniou48257c42005-10-28 16:25:58 -04001981source "drivers/net/fs_enet/Kconfig"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001982
David Daneyd6aa60a2009-10-14 12:04:41 -07001983source "drivers/net/octeon/Kconfig"
1984
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001985endif # NET_ETHERNET
Linus Torvalds1da177e2005-04-16 15:20:36 -07001986
1987#
1988# Gigabit Ethernet
1989#
1990
Jan Engelhardtf30486d2007-05-10 22:52:56 -07001991menuconfig NETDEV_1000
1992 bool "Ethernet (1000 Mbit)"
Randy Dunlapcbcd2a42005-07-27 13:04:35 -07001993 depends on !UML
Jan Engelhardtf30486d2007-05-10 22:52:56 -07001994 default y
Jan Engelhardt06bfb7e2007-08-18 12:56:21 +02001995 ---help---
1996 Ethernet (also called IEEE 802.3 or ISO 8802-2) is the most common
1997 type of Local Area Network (LAN) in universities and companies.
1998
1999 Say Y here to get to see options for Gigabit Ethernet drivers.
2000 This option alone does not add any kernel code.
2001 Note that drivers supporting both 100 and 1000 MBit may be listed
2002 under "Ethernet (10 or 100MBit)" instead.
2003
2004 If you say N, all options in this submenu will be skipped and disabled.
Jan Engelhardtf30486d2007-05-10 22:52:56 -07002005
2006if NETDEV_1000
Linus Torvalds1da177e2005-04-16 15:20:36 -07002007
2008config ACENIC
2009 tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support"
2010 depends on PCI
2011 ---help---
2012 Say Y here if you have an Alteon AceNIC, 3Com 3C985(B), NetGear
2013 GA620, SGI Gigabit or Farallon PN9000-SX PCI Gigabit Ethernet
2014 adapter. The driver allows for using the Jumbo Frame option (9000
2015 bytes/frame) however it requires that your switches can handle this
2016 as well. To enable Jumbo Frames, add `mtu 9000' to your ifconfig
2017 line.
2018
2019 To compile this driver as a module, choose M here: the
2020 module will be called acenic.
2021
2022config ACENIC_OMIT_TIGON_I
2023 bool "Omit support for old Tigon I based AceNICs"
2024 depends on ACENIC
2025 help
2026 Say Y here if you only have Tigon II based AceNICs and want to leave
2027 out support for the older Tigon I based cards which are no longer
2028 being sold (ie. the original Alteon AceNIC and 3Com 3C985 (non B
2029 version)). This will reduce the size of the driver object by
2030 app. 100KB. If you are not sure whether your card is a Tigon I or a
2031 Tigon II, say N here.
2032
2033 The safe and default value for this is N.
2034
2035config DL2K
Komurodf950822007-08-13 09:45:41 +09002036 tristate "DL2000/TC902x-based Gigabit Ethernet support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07002037 depends on PCI
2038 select CRC32
2039 help
Komurodf950822007-08-13 09:45:41 +09002040 This driver supports DL2000/TC902x-based Gigabit ethernet cards,
2041 which includes
Linus Torvalds1da177e2005-04-16 15:20:36 -07002042 D-Link DGE-550T Gigabit Ethernet Adapter.
2043 D-Link DL2000-based Gigabit Ethernet Adapter.
Komurodf950822007-08-13 09:45:41 +09002044 Sundance/Tamarack TC902x Gigabit Ethernet Adapter.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002045
2046 To compile this driver as a module, choose M here: the
2047 module will be called dl2k.
2048
2049config E1000
2050 tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
2051 depends on PCI
2052 ---help---
2053 This driver supports Intel(R) PRO/1000 gigabit ethernet family of
2054 adapters. For more information on how to identify your adapter, go
2055 to the Adapter & Driver ID Guide at:
2056
2057 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
2058
2059 For general information and support, go to the Intel support
2060 website at:
2061
2062 <http://support.intel.com>
2063
2064 More specific information on configuring the driver is in
2065 <file:Documentation/networking/e1000.txt>.
2066
Adrian Bunk57ce45d2007-11-12 21:03:58 -08002067 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07002068 will be called e1000.
2069
Auke Kokbc7f75f2007-09-17 12:30:59 -07002070config E1000E
2071 tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support"
Al Viro7ac86bf2008-04-27 06:15:42 +01002072 depends on PCI && (!SPARC32 || BROKEN)
Auke Kokbc7f75f2007-09-17 12:30:59 -07002073 ---help---
2074 This driver supports the PCI-Express Intel(R) PRO/1000 gigabit
2075 ethernet family of adapters. For PCI or PCI-X e1000 adapters,
2076 use the regular e1000 driver For more information on how to
2077 identify your adapter, go to the Adapter & Driver ID Guide at:
2078
2079 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
2080
2081 For general information and support, go to the Intel support
2082 website at:
2083
2084 <http://support.intel.com>
2085
Adrian Bunk57ce45d2007-11-12 21:03:58 -08002086 To compile this driver as a module, choose M here. The module
Auke Kokbc7f75f2007-09-17 12:30:59 -07002087 will be called e1000e.
2088
Stephen Hemmingerab7a9832008-01-01 09:27:58 -08002089config IP1000
2090 tristate "IP1000 Gigabit Ethernet support"
2091 depends on PCI && EXPERIMENTAL
2092 select MII
2093 ---help---
2094 This driver supports IP1000 gigabit Ethernet cards.
2095
2096 To compile this driver as a module, choose M here: the module
2097 will be called ipg. This is recommended.
2098
Auke Kok9d5c8242008-01-24 02:22:38 -08002099config IGB
Alexander Duyck3ef6b232008-11-20 00:46:57 -08002100 tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support"
Auke Kok9d5c8242008-01-24 02:22:38 -08002101 depends on PCI
2102 ---help---
Alexander Duyck3ef6b232008-11-20 00:46:57 -08002103 This driver supports Intel(R) 82575/82576 gigabit ethernet family of
Auke Kok9d5c8242008-01-24 02:22:38 -08002104 adapters. For more information on how to identify your adapter, go
2105 to the Adapter & Driver ID Guide at:
2106
2107 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
2108
2109 For general information and support, go to the Intel support
2110 website at:
2111
2112 <http://support.intel.com>
2113
2114 More specific information on configuring the driver is in
2115 <file:Documentation/networking/e1000.txt>.
2116
Johann Felix Soden2bfc79d2008-02-05 03:13:58 -08002117 To compile this driver as a module, choose M here. The module
Auke Kok9d5c8242008-01-24 02:22:38 -08002118 will be called igb.
2119
Jeff Kirsher421e02f2008-10-17 11:08:31 -07002120config IGB_DCA
Jeff Kirsher1d19ecf2008-11-02 20:30:33 -08002121 bool "Direct Cache Access (DCA) Support"
Jeff Kirsher421e02f2008-10-17 11:08:31 -07002122 default y
2123 depends on IGB && DCA && !(IGB=y && DCA=m)
Jeff Kirsher1d19ecf2008-11-02 20:30:33 -08002124 ---help---
2125 Say Y here if you want to use Direct Cache Access (DCA) in the
2126 driver. DCA is a method for warming the CPU cache before data
2127 is used, with the intent of lessening the impact of cache misses.
Jeff Kirsher421e02f2008-10-17 11:08:31 -07002128
Alexander Duyckd4e0fe02009-04-07 14:37:34 +00002129config IGBVF
2130 tristate "Intel(R) 82576 Virtual Function Ethernet support"
2131 depends on PCI
2132 ---help---
2133 This driver supports Intel(R) 82576 virtual functions. For more
2134 information on how to identify your adapter, go to the Adapter &
2135 Driver ID Guide at:
2136
2137 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
2138
2139 For general information and support, go to the Intel support
2140 website at:
2141
2142 <http://support.intel.com>
2143
2144 More specific information on configuring the driver is in
2145 <file:Documentation/networking/e1000.txt>.
2146
2147 To compile this driver as a module, choose M here. The module
2148 will be called igbvf.
2149
Lennert Buytenhek15d014d2005-11-11 18:23:13 +01002150source "drivers/net/ixp2000/Kconfig"
2151
Linus Torvalds1da177e2005-04-16 15:20:36 -07002152config MYRI_SBUS
2153 tristate "MyriCOM Gigabit Ethernet support"
2154 depends on SBUS
2155 help
2156 This driver supports MyriCOM Sbus gigabit Ethernet cards.
2157
2158 To compile this driver as a module, choose M here: the module
2159 will be called myri_sbus. This is recommended.
2160
2161config NS83820
Jon Mason47c51432006-02-12 11:53:04 -06002162 tristate "National Semiconductor DP83820 support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07002163 depends on PCI
2164 help
2165 This is a driver for the National Semiconductor DP83820 series
2166 of gigabit ethernet MACs. Cards using this chipset include
2167 the D-Link DGE-500T, PureData's PDP8023Z-TG, SMC's SMC9462TX,
2168 SOHO-GA2000T, SOHO-GA2500T. The driver supports the use of
2169 zero copy.
2170
2171config HAMACHI
2172 tristate "Packet Engines Hamachi GNIC-II support"
2173 depends on PCI
2174 select MII
2175 help
2176 If you have a Gigabit Ethernet card of this type, say Y and read
2177 the Ethernet-HOWTO, available from
2178 <http://www.tldp.org/docs.html#howto>.
2179
Adrian Bunk57ce45d2007-11-12 21:03:58 -08002180 To compile this driver as a module, choose M here. The module will be
Linus Torvalds1da177e2005-04-16 15:20:36 -07002181 called hamachi.
2182
2183config YELLOWFIN
2184 tristate "Packet Engines Yellowfin Gigabit-NIC support (EXPERIMENTAL)"
2185 depends on PCI && EXPERIMENTAL
2186 select CRC32
2187 ---help---
2188 Say Y here if you have a Packet Engines G-NIC PCI Gigabit Ethernet
2189 adapter or the SYM53C885 Ethernet controller. The Gigabit adapter is
2190 used by the Beowulf Linux cluster project. See
2191 <http://cesdis.gsfc.nasa.gov/linux/drivers/yellowfin.html> for more
2192 information about this driver in particular and Beowulf in general.
2193
2194 To compile this driver as a module, choose M here: the module
2195 will be called yellowfin. This is recommended.
2196
2197config R8169
2198 tristate "Realtek 8169 gigabit ethernet support"
2199 depends on PCI
2200 select CRC32
Francois Romieub7372492008-09-13 15:04:38 +02002201 select MII
Linus Torvalds1da177e2005-04-16 15:20:36 -07002202 ---help---
2203 Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter.
2204
2205 To compile this driver as a module, choose M here: the module
2206 will be called r8169. This is recommended.
2207
Linus Torvalds1da177e2005-04-16 15:20:36 -07002208config R8169_VLAN
2209 bool "VLAN support"
2210 depends on R8169 && VLAN_8021Q
2211 ---help---
2212 Say Y here for the r8169 driver to support the functions required
2213 by the kernel 802.1Q code.
Francois Romieu865c6522008-05-11 14:51:00 +02002214
Linus Torvalds1da177e2005-04-16 15:20:36 -07002215 If in doubt, say Y.
2216
Maciej W. Rozycki1a9e8542007-09-14 12:05:00 +01002217config SB1250_MAC
Maciej W. Rozycki25a72df2007-09-14 11:57:33 +01002218 tristate "SB1250 Gigabit Ethernet support"
2219 depends on SIBYTE_SB1xxx_SOC
Maciej W. Rozyckif5279ff2007-09-21 12:52:10 +01002220 select PHYLIB
Maciej W. Rozycki25a72df2007-09-14 11:57:33 +01002221 ---help---
2222 This driver supports Gigabit Ethernet interfaces based on the
2223 Broadcom SiByte family of System-On-a-Chip parts. They include
2224 the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455
2225 and BCM1480 chips.
2226
2227 To compile this driver as a module, choose M here: the module
2228 will be called sb1250-mac.
2229
Francois Romieu890e8d02005-07-30 13:08:43 +02002230config SIS190
Francois Romieue7976372005-09-03 00:57:51 +02002231 tristate "SiS190/SiS191 gigabit ethernet support"
Adrian Bunke9985d52005-08-09 02:41:00 +02002232 depends on PCI
2233 select CRC32
2234 select MII
2235 ---help---
Francois Romieue7976372005-09-03 00:57:51 +02002236 Say Y here if you have a SiS 190 PCI Fast Ethernet adapter or
2237 a SiS 191 PCI Gigabit Ethernet adapter. Both are expected to
2238 appear in lan on motherboard designs which are based on SiS 965
2239 and SiS 966 south bridge.
Francois Romieu890e8d02005-07-30 13:08:43 +02002240
Adrian Bunke9985d52005-08-09 02:41:00 +02002241 To compile this driver as a module, choose M here: the module
2242 will be called sis190. This is recommended.
Francois Romieu890e8d02005-07-30 13:08:43 +02002243
Stephen Hemmingerbaef58b2005-05-12 20:14:36 -04002244config SKGE
Stephen Hemminger7a160c72006-02-13 15:48:08 -08002245 tristate "New SysKonnect GigaEthernet support"
2246 depends on PCI
Stephen Hemmingerbaef58b2005-05-12 20:14:36 -04002247 select CRC32
2248 ---help---
2249 This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx
2250 and related Gigabit Ethernet adapters. It is a new smaller driver
Stephen Hemminger46a60f22005-09-09 12:54:56 -07002251 with better performance and more complete ethtool support.
Stephen Hemmingerbaef58b2005-05-12 20:14:36 -04002252
2253 It does not support the link failover and network management
Stephen Hemminger5ad887f2007-09-15 19:35:14 -04002254 features that "portable" vendor supplied sk98lin driver does.
Stephen Hemmingercd28ab62005-08-16 16:36:49 -07002255
Daniel Drakec6f0d752006-01-21 19:35:34 +00002256 This driver supports adapters based on the original Yukon chipset:
2257 Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T,
2258 Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872.
2259
2260 It does not support the newer Yukon2 chipset: a separate driver,
2261 sky2, is provided for Yukon2-based adapters.
2262
2263 To compile this driver as a module, choose M here: the module
2264 will be called skge. This is recommended.
Stephen Hemmingercd28ab62005-08-16 16:36:49 -07002265
Stephen Hemminger678aa1f2007-10-16 12:15:54 -07002266config SKGE_DEBUG
2267 bool "Debugging interface"
2268 depends on SKGE && DEBUG_FS
2269 help
2270 This option adds the ability to dump driver state for debugging.
GeunSik Lim156f5a72009-06-02 15:01:37 +09002271 The file /sys/kernel/debug/skge/ethX displays the state of the internal
Stephen Hemminger678aa1f2007-10-16 12:15:54 -07002272 transmit and receive rings.
2273
2274 If unsure, say N.
2275
Stephen Hemmingercd28ab62005-08-16 16:36:49 -07002276config SKY2
Stephen Hemminger8a3e3bf2007-07-09 15:33:38 -07002277 tristate "SysKonnect Yukon2 support"
Stephen Hemmingerf479b322006-10-27 10:22:10 -07002278 depends on PCI
Stephen Hemmingercd28ab62005-08-16 16:36:49 -07002279 select CRC32
2280 ---help---
Matt LaPlantecab00892006-10-03 22:36:44 +02002281 This driver supports Gigabit Ethernet adapters based on the
Daniel Drakec6f0d752006-01-21 19:35:34 +00002282 Marvell Yukon 2 chipset:
2283 Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/
2284 88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21
2285
Stephen Hemmingerf479b322006-10-27 10:22:10 -07002286 There is companion driver for the older Marvell Yukon and
2287 Genesis based adapters: skge.
Stephen Hemmingercd28ab62005-08-16 16:36:49 -07002288
2289 To compile this driver as a module, choose M here: the module
2290 will be called sky2. This is recommended.
2291
Stephen Hemminger3cf26752007-07-09 15:33:35 -07002292config SKY2_DEBUG
2293 bool "Debugging interface"
2294 depends on SKY2 && DEBUG_FS
2295 help
2296 This option adds the ability to dump driver state for debugging.
GeunSik Lim156f5a72009-06-02 15:01:37 +09002297 The file /sys/kernel/debug/sky2/ethX displays the state of the internal
Stephen Hemminger3cf26752007-07-09 15:33:35 -07002298 transmit and receive rings.
Daniel Drakec6f0d752006-01-21 19:35:34 +00002299
Stephen Hemminger3cf26752007-07-09 15:33:35 -07002300 If unsure, say N.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002301
2302config VIA_VELOCITY
2303 tristate "VIA Velocity support"
Yoichi Yuasa73815532007-05-24 16:12:27 +09002304 depends on PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -07002305 select CRC32
2306 select CRC_CCITT
2307 select MII
2308 help
2309 If you have a VIA "Velocity" based network card say Y here.
2310
2311 To compile this driver as a module, choose M here. The module
2312 will be called via-velocity.
2313
2314config TIGON3
2315 tristate "Broadcom Tigon3 support"
2316 depends on PCI
Matt Carlson158d7ab2008-05-29 01:37:54 -07002317 select PHYLIB
Linus Torvalds1da177e2005-04-16 15:20:36 -07002318 help
2319 This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
2320
2321 To compile this driver as a module, choose M here: the module
2322 will be called tg3. This is recommended.
2323
Michael Chanb6016b72005-05-26 13:03:09 -07002324config BNX2
2325 tristate "Broadcom NetXtremeII support"
2326 depends on PCI
Michael Chanfba9fe92006-06-12 22:21:25 -07002327 select CRC32
Michael Chan57579f72009-04-04 16:51:14 -07002328 select FW_LOADER
Michael Chanb6016b72005-05-26 13:03:09 -07002329 help
2330 This driver supports Broadcom NetXtremeII gigabit Ethernet cards.
2331
2332 To compile this driver as a module, choose M here: the module
2333 will be called bnx2. This is recommended.
2334
Michael Chana4636962009-06-08 18:14:43 -07002335config CNIC
2336 tristate "Broadcom CNIC support"
Michael Chanbabdb782009-06-10 13:35:28 -07002337 depends on PCI
2338 select BNX2
2339 select UIO
Michael Chana4636962009-06-08 18:14:43 -07002340 help
2341 This driver supports offload features of Broadcom NetXtremeII
2342 gigabit Ethernet cards.
2343
2344 To compile this driver as a module, choose M here: the module
2345 will be called cnic. This is recommended.
2346
Jens Osterkampaaec0fa2005-09-05 15:19:29 -07002347config SPIDER_NET
2348 tristate "Spider Gigabit Ethernet driver"
Kou Ishizaki3342cf0e2007-02-20 16:36:14 -06002349 depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB)
Christoph Hellwig9b158792006-03-15 11:30:44 +01002350 select FW_LOADER
Jens Osterkampaaec0fa2005-09-05 15:19:29 -07002351 help
2352 This driver supports the Gigabit Ethernet chips present on the
2353 Cell Processor-Based Blades from IBM.
2354
Zang Roy-r619115e123b82006-11-08 19:49:13 -08002355config TSI108_ETH
2356 tristate "Tundra TSI108 gigabit Ethernet support"
2357 depends on TSI108_BRIDGE
2358 help
2359 This driver supports Tundra TSI108 gigabit Ethernet ports.
2360 To compile this driver as a module, choose M here: the module
2361 will be called tsi108_eth.
2362
Masakazu Mokuno02c18892007-07-05 20:11:16 +09002363config GELIC_NET
2364 tristate "PS3 Gigabit Ethernet driver"
2365 depends on PPC_PS3
Geoff Levand1d32e212008-04-10 07:01:53 +10002366 select PS3_SYS_MANAGER
Masakazu Mokuno02c18892007-07-05 20:11:16 +09002367 help
2368 This driver supports the network device on the PS3 game
2369 console. This driver has built-in support for Ethernet.
2370
2371 To compile this driver as a module, choose M here: the
2372 module will be called ps3_gelic.
2373
Masakazu Mokuno09dde542008-02-07 19:58:57 +09002374config GELIC_WIRELESS
John W. Linville97ed8392008-03-06 13:08:09 -05002375 bool "PS3 Wireless support"
Benjamin Herrenschmidt92c6f8d2009-12-18 11:19:32 -08002376 depends on WLAN
John W. Linville97ed8392008-03-06 13:08:09 -05002377 depends on GELIC_NET
2378 select WIRELESS_EXT
2379 help
2380 This option adds the support for the wireless feature of PS3.
2381 If you have the wireless-less model of PS3 or have no plan to
2382 use wireless feature, disabling this option saves memory. As
2383 the driver automatically distinguishes the models, you can
2384 safely enable this option even if you have a wireless-less model.
Masakazu Mokuno09dde542008-02-07 19:58:57 +09002385
Andy Fleming1577ece2009-02-04 16:42:12 -08002386config FSL_PQ_MDIO
2387 tristate "Freescale PQ MDIO"
2388 depends on FSL_SOC
2389 select PHYLIB
2390 help
2391 This driver supports the MDIO bus used by the gianfar and UCC drivers.
2392
Linus Torvalds1da177e2005-04-16 15:20:36 -07002393config GIANFAR
2394 tristate "Gianfar Ethernet"
Kumar Gala3a831562008-01-28 10:24:30 -06002395 depends on FSL_SOC
Andy Fleming1577ece2009-02-04 16:42:12 -08002396 select FSL_PQ_MDIO
Andy Flemingbb40dcb2005-09-23 22:54:21 -04002397 select PHYLIB
Dave Jiangbf41a7c2007-04-12 10:57:06 -07002398 select CRC32
Linus Torvalds1da177e2005-04-16 15:20:36 -07002399 help
Jon Loeligeref82a3062006-06-17 17:52:55 -05002400 This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx,
2401 and MPC86xx family of chips, and the FEC on the 8540.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002402
Li Yangce973b12006-08-14 23:00:11 -07002403config UCC_GETH
Timur Tabi7d776cb2007-03-12 15:40:27 -05002404 tristate "Freescale QE Gigabit Ethernet"
2405 depends on QUICC_ENGINE
Andy Fleming1577ece2009-02-04 16:42:12 -08002406 select FSL_PQ_MDIO
Jan Altenberg296baae2007-06-01 00:46:29 -07002407 select PHYLIB
Li Yangce973b12006-08-14 23:00:11 -07002408 help
Timur Tabi7d776cb2007-03-12 15:40:27 -05002409 This driver supports the Gigabit Ethernet mode of the QUICC Engine,
2410 which is available on some Freescale SOCs.
Li Yangce973b12006-08-14 23:00:11 -07002411
Michael Reissd5b90492007-04-13 01:26:19 -05002412config UGETH_TX_ON_DEMAND
2413 bool "Transmit on Demand support"
Li Yangce973b12006-08-14 23:00:11 -07002414 depends on UCC_GETH
2415
Linus Torvalds1da177e2005-04-16 15:20:36 -07002416config MV643XX_ETH
Lennert Buytenhek9c1bbdf2007-10-19 04:11:03 +02002417 tristate "Marvell Discovery (643XX) and Orion ethernet support"
Gabriel Paubertdfa92642009-05-25 22:46:19 -07002418 depends on MV64X60 || PPC32 || PLAT_ORION
Lennert Buytenhekab307a32009-02-24 15:41:32 +00002419 select INET_LRO
Lennert Buytenheked944932008-08-26 13:34:19 +02002420 select PHYLIB
Linus Torvalds1da177e2005-04-16 15:20:36 -07002421 help
Lennert Buytenhek9c1bbdf2007-10-19 04:11:03 +02002422 This driver supports the gigabit ethernet MACs in the
2423 Marvell Discovery PPC/MIPS chipset family (MV643XX) and
2424 in the Marvell Orion ARM SoC family.
2425
2426 Some boards that use the Discovery chipset are the Momenco
2427 Ocelot C and Jaguar ATX and Pegasos II.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002428
Grant Likely92744982009-04-25 12:53:39 +00002429config XILINX_LL_TEMAC
2430 tristate "Xilinx LL TEMAC (LocalLink Tri-mode Ethernet MAC) driver"
John Linne44171f2010-04-08 07:08:02 +00002431 depends on PPC || MICROBLAZE
Grant Likely92744982009-04-25 12:53:39 +00002432 select PHYLIB
Grant Likely92744982009-04-25 12:53:39 +00002433 help
2434 This driver supports the Xilinx 10/100/1000 LocalLink TEMAC
2435 core used in Xilinx Spartan and Virtex FPGAs
2436
Ron Mercer5a4faa872006-07-25 00:40:21 -07002437config QLA3XXX
2438 tristate "QLogic QLA3XXX Network Driver Support"
2439 depends on PCI
2440 help
2441 This driver supports QLogic ISP3XXX gigabit Ethernet cards.
2442
2443 To compile this driver as a module, choose M here: the module
2444 will be called qla3xxx.
2445
Jay Cliburnf3cc28c2007-02-08 10:42:37 -05002446config ATL1
Jay Cliburna6d1f362008-09-27 04:17:22 +00002447 tristate "Atheros/Attansic L1 Gigabit Ethernet support"
2448 depends on PCI
Jay Cliburnf3cc28c2007-02-08 10:42:37 -05002449 select CRC32
2450 select MII
2451 help
Jay Cliburna6d1f362008-09-27 04:17:22 +00002452 This driver supports the Atheros/Attansic L1 gigabit ethernet
2453 adapter.
Jay Cliburnf3cc28c2007-02-08 10:42:37 -05002454
2455 To compile this driver as a module, choose M here. The module
2456 will be called atl1.
2457
Jie Yanga6a53252008-07-18 11:37:13 +08002458config ATL1E
2459 tristate "Atheros L1E Gigabit Ethernet support (EXPERIMENTAL)"
2460 depends on PCI && EXPERIMENTAL
2461 select CRC32
2462 select MII
2463 help
2464 This driver supports the Atheros L1E gigabit ethernet adapter.
2465
2466 To compile this driver as a module, choose M here. The module
2467 will be called atl1e.
2468
Jie Yang43250dd2009-02-18 17:24:15 -08002469config ATL1C
2470 tristate "Atheros L1C Gigabit Ethernet support (EXPERIMENTAL)"
2471 depends on PCI && EXPERIMENTAL
2472 select CRC32
2473 select MII
2474 help
2475 This driver supports the Atheros L1C gigabit ethernet adapter.
2476
2477 To compile this driver as a module, choose M here. The module
2478 will be called atl1c.
2479
Guo-Fu Tseng95252232008-09-16 01:00:11 +08002480config JME
2481 tristate "JMicron(R) PCI-Express Gigabit Ethernet support"
2482 depends on PCI
2483 select CRC32
2484 select MII
2485 ---help---
2486 This driver supports the PCI-Express gigabit ethernet adapters
2487 based on JMicron JMC250 chipset.
2488
2489 To compile this driver as a module, choose M here. The module
2490 will be called jme.
2491
Oskar Schirmer8b0215a2009-06-10 12:58:48 -07002492config S6GMAC
2493 tristate "S6105 GMAC ethernet support"
2494 depends on XTENSA_VARIANT_S6000
2495 select PHYLIB
2496 help
2497 This driver supports the on chip ethernet device on the
2498 S6105 xtensa processor.
2499
2500 To compile this driver as a module, choose M here. The module
2501 will be called s6gmac.
2502
Giuseppe Cavallaro47dd7a52009-10-14 15:13:45 -07002503source "drivers/net/stmmac/Kconfig"
2504
Jan Engelhardtf30486d2007-05-10 22:52:56 -07002505endif # NETDEV_1000
Linus Torvalds1da177e2005-04-16 15:20:36 -07002506
2507#
2508# 10 Gigabit Ethernet
2509#
2510
Jan Engelhardtf30486d2007-05-10 22:52:56 -07002511menuconfig NETDEV_10000
2512 bool "Ethernet (10000 Mbit)"
Randy Dunlapcbcd2a42005-07-27 13:04:35 -07002513 depends on !UML
Jan Engelhardtf30486d2007-05-10 22:52:56 -07002514 default y
Jan Engelhardt06bfb7e2007-08-18 12:56:21 +02002515 ---help---
2516 Say Y here to get to see options for 10 Gigabit Ethernet drivers.
2517 This option alone does not add any kernel code.
2518
2519 If you say N, all options in this submenu will be skipped and disabled.
Jan Engelhardtf30486d2007-05-10 22:52:56 -07002520
2521if NETDEV_10000
Linus Torvalds1da177e2005-04-16 15:20:36 -07002522
Ben Hutchings1b1c2e92009-04-29 08:04:46 +00002523config MDIO
2524 tristate
2525
Christoph Lameter8199d3a2005-03-30 13:34:31 -08002526config CHELSIO_T1
2527 tristate "Chelsio 10Gb Ethernet support"
2528 depends on PCI
Stephen Hemminger57834ca2006-12-01 16:36:19 -08002529 select CRC32
Ben Hutchings23c33202009-04-29 08:06:34 +00002530 select MDIO
Christoph Lameter8199d3a2005-03-30 13:34:31 -08002531 help
Stephen Hemmingerf1d3d382006-12-01 16:36:16 -08002532 This driver supports Chelsio gigabit and 10-gigabit
2533 Ethernet cards. More information about adapter features and
2534 performance tuning is in <file:Documentation/networking/cxgb.txt>.
Christoph Lameter8199d3a2005-03-30 13:34:31 -08002535
2536 For general information about Chelsio and our products, visit
2537 our website at <http://www.chelsio.com>.
2538
2539 For customer support, please visit our customer support page at
2540 <http://www.chelsio.com/support.htm>.
2541
2542 Please send feedback to <linux-bugs@chelsio.com>.
2543
2544 To compile this driver as a module, choose M here: the module
2545 will be called cxgb.
2546
Stephen Hemminger352c4172006-12-01 16:36:17 -08002547config CHELSIO_T1_1G
2548 bool "Chelsio gigabit Ethernet support"
2549 depends on CHELSIO_T1
2550 help
2551 Enables support for Chelsio's gigabit Ethernet PCI cards. If you
2552 are using only 10G cards say 'N' here.
2553
James Bottomley58daa682008-12-30 10:20:24 -06002554config CHELSIO_T3_DEPENDS
2555 tristate
2556 depends on PCI && INET
2557 default y
2558
Divy Le Ray4d22de32007-01-18 22:04:14 -05002559config CHELSIO_T3
Divy Le Ray194c1fb2007-03-21 19:21:00 -07002560 tristate "Chelsio Communications T3 10Gb Ethernet support"
James Bottomley58daa682008-12-30 10:20:24 -06002561 depends on CHELSIO_T3_DEPENDS
Divy Le Ray2e283962007-03-18 13:10:06 -07002562 select FW_LOADER
Ben Hutchings0f07c4e2009-04-29 08:07:20 +00002563 select MDIO
Divy Le Ray194c1fb2007-03-21 19:21:00 -07002564 help
2565 This driver supports Chelsio T3-based gigabit and 10Gb Ethernet
2566 adapters.
Divy Le Ray4d22de32007-01-18 22:04:14 -05002567
Divy Le Ray194c1fb2007-03-21 19:21:00 -07002568 For general information about Chelsio and our products, visit
2569 our website at <http://www.chelsio.com>.
Divy Le Ray4d22de32007-01-18 22:04:14 -05002570
Divy Le Ray194c1fb2007-03-21 19:21:00 -07002571 For customer support, please visit our customer support page at
2572 <http://www.chelsio.com/support.htm>.
Divy Le Ray4d22de32007-01-18 22:04:14 -05002573
Divy Le Ray194c1fb2007-03-21 19:21:00 -07002574 Please send feedback to <linux-bugs@chelsio.com>.
Divy Le Ray4d22de32007-01-18 22:04:14 -05002575
Divy Le Ray194c1fb2007-03-21 19:21:00 -07002576 To compile this driver as a module, choose M here: the module
2577 will be called cxgb3.
Divy Le Ray4d22de32007-01-18 22:04:14 -05002578
Dimitris Michailidis43e9da82010-04-01 15:28:27 +00002579config CHELSIO_T4_DEPENDS
2580 tristate
2581 depends on PCI && INET
2582 default y
2583
2584config CHELSIO_T4
2585 tristate "Chelsio Communications T4 Ethernet support"
2586 depends on CHELSIO_T4_DEPENDS
2587 select FW_LOADER
2588 select MDIO
2589 help
2590 This driver supports Chelsio T4-based gigabit and 10Gb Ethernet
2591 adapters.
2592
2593 For general information about Chelsio and our products, visit
2594 our website at <http://www.chelsio.com>.
2595
2596 For customer support, please visit our customer support page at
2597 <http://www.chelsio.com/support.htm>.
2598
2599 Please send feedback to <linux-bugs@chelsio.com>.
2600
2601 To compile this driver as a module choose M here; the module
2602 will be called cxgb4.
2603
Jan-Bernd Themann7a291082006-09-13 17:44:31 +02002604config EHEA
2605 tristate "eHEA Ethernet support"
Nathan Lynch60d50192008-06-04 08:31:28 +10002606 depends on IBMEBUS && INET && SPARSEMEM
Jan-Bernd Themannd4dc4ec2007-09-25 16:16:34 -07002607 select INET_LRO
Jan-Bernd Themann7a291082006-09-13 17:44:31 +02002608 ---help---
2609 This driver supports the IBM pSeries eHEA ethernet adapter.
2610
2611 To compile the driver as a module, choose M here. The module
2612 will be called ehea.
2613
Scott Feldman01f2e4e2008-09-15 09:17:11 -07002614config ENIC
Vasanthy Kolluri641cb852010-03-18 16:20:04 +00002615 tristate "Cisco VIC Ethernet NIC Support"
Scott Feldman01f2e4e2008-09-15 09:17:11 -07002616 depends on PCI && INET
2617 select INET_LRO
2618 help
Vasanthy Kolluri641cb852010-03-18 16:20:04 +00002619 This enables the support for the Cisco VIC Ethernet card.
Scott Feldman01f2e4e2008-09-15 09:17:11 -07002620
Auke Kok9a799d72007-09-15 14:07:45 -07002621config IXGBE
2622 tristate "Intel(R) 10GbE PCI Express adapters support"
Mallikarjuna R Chilakala177db6f2008-06-18 15:32:19 -07002623 depends on PCI && INET
Ben Hutchings6b73e102009-04-29 08:08:58 +00002624 select MDIO
Auke Kok9a799d72007-09-15 14:07:45 -07002625 ---help---
2626 This driver supports Intel(R) 10GbE PCI Express family of
2627 adapters. For more information on how to identify your adapter, go
2628 to the Adapter & Driver ID Guide at:
2629
2630 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
2631
2632 For general information and support, go to the Intel support
2633 website at:
2634
2635 <http://support.intel.com>
2636
Adrian Bunk57ce45d2007-11-12 21:03:58 -08002637 To compile this driver as a module, choose M here. The module
Auke Kok9a799d72007-09-15 14:07:45 -07002638 will be called ixgbe.
2639
Jeff Garzik5dd2d332008-10-16 05:09:31 -04002640config IXGBE_DCA
Jeff Kirsher1d19ecf2008-11-02 20:30:33 -08002641 bool "Direct Cache Access (DCA) Support"
Jeff Garzik5dd2d332008-10-16 05:09:31 -04002642 default y
2643 depends on IXGBE && DCA && !(IXGBE=y && DCA=m)
Jeff Kirsher1d19ecf2008-11-02 20:30:33 -08002644 ---help---
2645 Say Y here if you want to use Direct Cache Access (DCA) in the
2646 driver. DCA is a method for warming the CPU cache before data
2647 is used, with the intent of lessening the impact of cache misses.
Jeff Garzik5dd2d332008-10-16 05:09:31 -04002648
Jeff Kirsher7a6b6f52008-11-25 01:02:08 -08002649config IXGBE_DCB
Alexander Duyck2f90b862008-11-20 20:52:10 -08002650 bool "Data Center Bridging (DCB) Support"
2651 default n
Jeff Kirsher7a6b6f52008-11-25 01:02:08 -08002652 depends on IXGBE && DCB
Alexander Duyck2f90b862008-11-20 20:52:10 -08002653 ---help---
2654 Say Y here if you want to use Data Center Bridging (DCB) in the
2655 driver.
2656
2657 If unsure, say N.
2658
Greg Roseecc67032010-01-09 02:24:50 +00002659config IXGBEVF
2660 tristate "Intel(R) 82599 Virtual Function Ethernet support"
2661 depends on PCI_MSI
2662 ---help---
2663 This driver supports Intel(R) 82599 virtual functions. For more
2664 information on how to identify your adapter, go to the Adapter &
2665 Driver ID Guide at:
2666
2667 <http://support.intel.com/support/network/sb/CS-008441.htm>
2668
2669 For general information and support, go to the Intel support
2670 website at:
2671
2672 <http://support.intel.com>
2673
2674 More specific information on configuring the driver is in
2675 <file:Documentation/networking/ixgbevf.txt>.
2676
2677 To compile this driver as a module, choose M here. The module
2678 will be called ixgbevf. MSI-X interrupt support is required
2679 for this driver to work correctly.
2680
Linus Torvalds1da177e2005-04-16 15:20:36 -07002681config IXGB
2682 tristate "Intel(R) PRO/10GbE support"
2683 depends on PCI
2684 ---help---
Auke Kok9a799d72007-09-15 14:07:45 -07002685 This driver supports Intel(R) PRO/10GbE family of adapters for
2686 PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver
2687 instead. For more information on how to identify your adapter, go
Linus Torvalds1da177e2005-04-16 15:20:36 -07002688 to the Adapter & Driver ID Guide at:
2689
2690 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
2691
2692 For general information and support, go to the Intel support
2693 website at:
2694
2695 <http://support.intel.com>
2696
2697 More specific information on configuring the driver is in
2698 <file:Documentation/networking/ixgb.txt>.
2699
Adrian Bunk57ce45d2007-11-12 21:03:58 -08002700 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07002701 will be called ixgb.
2702
Linus Torvalds1da177e2005-04-16 15:20:36 -07002703config S2IO
2704 tristate "S2IO 10Gbe XFrame NIC"
2705 depends on PCI
2706 ---help---
2707 This driver supports the 10Gbe XFrame NIC of S2IO.
Akinobu Mita9eb343a2005-10-21 19:06:42 +09002708 More specific information on configuring the driver is in
2709 <file:Documentation/networking/s2io.txt>.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002710
Ramkrishna Vepaf1782852009-04-01 18:15:24 +00002711config VXGE
2712 tristate "Neterion X3100 Series 10GbE PCIe Server Adapter"
2713 depends on PCI && INET
2714 ---help---
2715 This driver supports Neterion Inc's X3100 Series 10 GbE PCIe
2716 I/O Virtualized Server Adapter.
2717 More specific information on configuring the driver is in
2718 <file:Documentation/networking/vxge.txt>.
2719
2720config VXGE_DEBUG_TRACE_ALL
2721 bool "Enabling All Debug trace statments in driver"
2722 default n
2723 depends on VXGE
2724 ---help---
2725 Say Y here if you want to enabling all the debug trace statements in
2726 driver. By default only few debug trace statements are enabled.
2727
Brice Goglin0da34b62006-05-23 06:10:15 -04002728config MYRI10GE
2729 tristate "Myricom Myri-10G Ethernet support"
Randy Dunlape0d5dab2007-10-18 21:53:50 -07002730 depends on PCI && INET
Brice Goglin0da34b62006-05-23 06:10:15 -04002731 select FW_LOADER
2732 select CRC32
Andrew Gallatin1e6e9342007-09-17 11:37:42 -07002733 select INET_LRO
Brice Goglin0da34b62006-05-23 06:10:15 -04002734 ---help---
2735 This driver supports Myricom Myri-10G Dual Protocol interface in
2736 Ethernet mode. If the eeprom on your board is not recent enough,
2737 you will need a newer firmware image.
2738 You may get this image or more information, at:
2739
Brice Goglind2794902006-09-05 21:58:50 -04002740 <http://www.myri.com/scs/download-Myri10GE.html>
Brice Goglin0da34b62006-05-23 06:10:15 -04002741
Adrian Bunk57ce45d2007-11-12 21:03:58 -08002742 To compile this driver as a module, choose M here. The module
Brice Goglin0da34b62006-05-23 06:10:15 -04002743 will be called myri10ge.
2744
Jeff Garzik5dd2d332008-10-16 05:09:31 -04002745config MYRI10GE_DCA
Jeff Kirsher1d19ecf2008-11-02 20:30:33 -08002746 bool "Direct Cache Access (DCA) Support"
Jeff Garzik5dd2d332008-10-16 05:09:31 -04002747 default y
2748 depends on MYRI10GE && DCA && !(MYRI10GE=y && DCA=m)
Jeff Kirsher1d19ecf2008-11-02 20:30:33 -08002749 ---help---
2750 Say Y here if you want to use Direct Cache Access (DCA) in the
2751 driver. DCA is a method for warming the CPU cache before data
2752 is used, with the intent of lessening the impact of cache misses.
Jeff Garzik5dd2d332008-10-16 05:09:31 -04002753
Amit S. Kale3d396eb2006-10-21 15:33:03 -04002754config NETXEN_NIC
2755 tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
Randy Dunlap5ac36612006-11-16 21:39:11 -08002756 depends on PCI
Anirban Chakraborty06aeb782010-06-23 11:49:42 -07002757 select FW_LOADER
Amit S. Kale3d396eb2006-10-21 15:33:03 -04002758 help
2759 This enables the support for NetXen's Gigabit Ethernet card.
2760
David S. Millera3138df2007-10-09 01:54:01 -07002761config NIU
2762 tristate "Sun Neptune 10Gbit Ethernet support"
2763 depends on PCI
Randy Dunlapc557c152009-12-10 13:50:56 -08002764 select CRC32
David S. Millera3138df2007-10-09 01:54:01 -07002765 help
2766 This enables support for cards based upon Sun's
2767 Neptune chipset.
2768
Olof Johanssonf5cd7872007-01-31 21:43:54 -06002769config PASEMI_MAC
2770 tristate "PA Semi 1/10Gbit MAC"
Michael Ellerman5beaf7d2008-03-28 12:17:33 +11002771 depends on PPC_PASEMI && PCI
Olof Johanssonbb6e9592007-05-08 00:47:54 -05002772 select PHYLIB
Olof Johansson28ae79f2007-11-28 20:57:27 -06002773 select INET_LRO
Olof Johanssonf5cd7872007-01-31 21:43:54 -06002774 help
2775 This driver supports the on-chip 1/10Gbit Ethernet controller on
2776 PA Semi's PWRficient line of chips.
2777
Yevgeny Petrilinc27a02c2008-10-22 15:47:49 -07002778config MLX4_EN
2779 tristate "Mellanox Technologies 10Gbit Ethernet support"
2780 depends on PCI && INET
2781 select MLX4_CORE
2782 select INET_LRO
2783 help
2784 This driver supports Mellanox Technologies ConnectX Ethernet
2785 devices.
2786
Roland Dreier225c7b12007-05-08 18:00:38 -07002787config MLX4_CORE
2788 tristate
2789 depends on PCI
2790 default n
2791
2792config MLX4_DEBUG
2793 bool "Verbose debugging output" if (MLX4_CORE && EMBEDDED)
Paul Mundtf550d942007-05-10 12:50:28 +09002794 depends on MLX4_CORE
Roland Dreier225c7b12007-05-08 18:00:38 -07002795 default y
2796 ---help---
2797 This option causes debugging code to be compiled into the
2798 mlx4_core driver. The output can be turned on via the
2799 debug_level module parameter (which can also be set after
2800 the driver is loaded through sysfs).
2801
Andy Gospodarek1a348cc2007-09-17 18:50:36 -07002802config TEHUTI
2803 tristate "Tehuti Networks 10G Ethernet"
2804 depends on PCI
2805 help
2806 Tehuti Networks 10G Ethernet NIC
2807
Eliezer Tamira2fbb9e2007-11-15 20:09:02 +02002808config BNX2X
2809 tristate "Broadcom NetXtremeII 10Gb support"
2810 depends on PCI
Vladislav Zolotarov94a78b72009-04-27 03:27:43 -07002811 select FW_LOADER
Lee Schermerhorn07b270e2007-12-13 16:02:59 -08002812 select ZLIB_INFLATE
Eilon Greenstein34f80b02008-06-23 20:33:01 -07002813 select LIBCRC32C
Eilon Greenstein01cd4522009-08-12 08:23:08 +00002814 select MDIO
Eliezer Tamira2fbb9e2007-11-15 20:09:02 +02002815 help
2816 This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
2817 To compile this driver as a module, choose M here: the module
2818 will be called bnx2x. This is recommended.
2819
Amit Kumar Salecha0ec00f02010-01-13 00:37:26 +00002820config QLCNIC
2821 tristate "QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support"
2822 depends on PCI
Anirban Chakraborty06aeb782010-06-23 11:49:42 -07002823 select FW_LOADER
Amit Kumar Salecha0ec00f02010-01-13 00:37:26 +00002824 help
2825 This driver supports QLogic QLE8240 and QLE8242 Converged Ethernet
2826 devices.
2827
Ron Mercerc4e84bd2008-09-18 11:56:28 -04002828config QLGE
2829 tristate "QLogic QLGE 10Gb Ethernet Driver Support"
2830 depends on PCI
2831 help
2832 This driver supports QLogic ISP8XXX 10Gb Ethernet cards.
2833
2834 To compile this driver as a module, choose M here: the module
2835 will be called qlge.
2836
Ben Hutchings8ceee662008-04-27 12:55:59 +01002837source "drivers/net/sfc/Kconfig"
Eliezer Tamira2fbb9e2007-11-15 20:09:02 +02002838
Sathya Perla6b7c5b92009-03-11 23:32:03 -07002839source "drivers/net/benet/Kconfig"
2840
Jan Engelhardtf30486d2007-05-10 22:52:56 -07002841endif # NETDEV_10000
Linus Torvalds1da177e2005-04-16 15:20:36 -07002842
Linus Torvalds1da177e2005-04-16 15:20:36 -07002843source "drivers/net/tokenring/Kconfig"
2844
2845source "drivers/net/wireless/Kconfig"
2846
Inaky Perez-Gonzalez143ee2d2008-12-23 16:18:48 -08002847source "drivers/net/wimax/Kconfig"
2848
Jeff Garzik5b2fc492007-05-09 21:31:55 -04002849source "drivers/net/usb/Kconfig"
2850
Linus Torvalds1da177e2005-04-16 15:20:36 -07002851source "drivers/net/pcmcia/Kconfig"
Linus Torvalds1da177e2005-04-16 15:20:36 -07002852
2853source "drivers/net/wan/Kconfig"
2854
2855source "drivers/atm/Kconfig"
2856
Sergey Lapin84594642009-06-08 12:18:51 +00002857source "drivers/ieee802154/Kconfig"
2858
Linus Torvalds1da177e2005-04-16 15:20:36 -07002859source "drivers/s390/net/Kconfig"
2860
Sjur Braendeland9b271052010-03-30 13:56:30 +00002861source "drivers/net/caif/Kconfig"
2862
Jeremy Fitzhardinge0d160212007-07-17 18:37:06 -07002863config XEN_NETDEV_FRONTEND
2864 tristate "Xen network device frontend driver"
2865 depends on XEN
2866 default y
2867 help
2868 The network device frontend driver allows the kernel to
2869 access network devices exported exported by a virtual
2870 machine containing a physical network device driver. The
2871 frontend driver is intended for unprivileged guest domains;
2872 if you are compiling a kernel for a Xen guest, you almost
2873 certainly want to enable this.
2874
Linus Torvalds1da177e2005-04-16 15:20:36 -07002875config ISERIES_VETH
2876 tristate "iSeries Virtual Ethernet driver support"
Randy Dunlapcbcd2a42005-07-27 13:04:35 -07002877 depends on PPC_ISERIES
Linus Torvalds1da177e2005-04-16 15:20:36 -07002878
Matt Porterf89efd52005-09-09 12:10:10 -07002879config RIONET
2880 tristate "RapidIO Ethernet over messaging driver support"
Randy Dunlapa81c52a2006-11-01 21:18:58 -08002881 depends on RAPIDIO
Matt Porterf89efd52005-09-09 12:10:10 -07002882
2883config RIONET_TX_SIZE
2884 int "Number of outbound queue entries"
2885 depends on RIONET
2886 default "128"
2887
2888config RIONET_RX_SIZE
2889 int "Number of inbound queue entries"
2890 depends on RIONET
2891 default "128"
2892
Linus Torvalds1da177e2005-04-16 15:20:36 -07002893config FDDI
Dave Joneseb560922008-12-27 20:43:48 -08002894 tristate "FDDI driver support"
Maciej W. Rozyckie89a2cf2007-02-05 16:28:27 -08002895 depends on (PCI || EISA || TC)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002896 help
2897 Fiber Distributed Data Interface is a high speed local area network
2898 design; essentially a replacement for high speed Ethernet. FDDI can
2899 run over copper or fiber. If you are connected to such a network and
2900 want a driver for the FDDI card in your computer, say Y here (and
2901 then also Y to the driver for your FDDI card, below). Most people
2902 will say N.
2903
2904config DEFXX
Maciej W. Rozyckie89a2cf2007-02-05 16:28:27 -08002905 tristate "Digital DEFTA/DEFEA/DEFPA adapter support"
2906 depends on FDDI && (PCI || EISA || TC)
2907 ---help---
2908 This is support for the DIGITAL series of TURBOchannel (DEFTA),
2909 EISA (DEFEA) and PCI (DEFPA) controllers which can connect you
2910 to a local FDDI network.
2911
2912 To compile this driver as a module, choose M here: the module
2913 will be called defxx. If unsure, say N.
2914
2915config DEFXX_MMIO
2916 bool
2917 prompt "Use MMIO instead of PIO" if PCI || EISA
2918 depends on DEFXX
2919 default n if PCI || EISA
2920 default y
2921 ---help---
2922 This instructs the driver to use EISA or PCI memory-mapped I/O
2923 (MMIO) as appropriate instead of programmed I/O ports (PIO).
2924 Enabling this gives an improvement in processing time in parts
2925 of the driver, but it may cause problems with EISA (DEFEA)
2926 adapters. TURBOchannel does not have the concept of I/O ports,
2927 so MMIO is always used for these (DEFTA) adapters.
2928
2929 If unsure, say N.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002930
2931config SKFP
2932 tristate "SysKonnect FDDI PCI support"
2933 depends on FDDI && PCI
Akinobu Mitabc63eb92006-12-19 13:09:08 -08002934 select BITREVERSE
Linus Torvalds1da177e2005-04-16 15:20:36 -07002935 ---help---
2936 Say Y here if you have a SysKonnect FDDI PCI adapter.
2937 The following adapters are supported by this driver:
2938 - SK-5521 (SK-NET FDDI-UP)
2939 - SK-5522 (SK-NET FDDI-UP DAS)
2940 - SK-5541 (SK-NET FDDI-FP)
2941 - SK-5543 (SK-NET FDDI-LP)
2942 - SK-5544 (SK-NET FDDI-LP DAS)
2943 - SK-5821 (SK-NET FDDI-UP64)
2944 - SK-5822 (SK-NET FDDI-UP64 DAS)
2945 - SK-5841 (SK-NET FDDI-FP64)
2946 - SK-5843 (SK-NET FDDI-LP64)
2947 - SK-5844 (SK-NET FDDI-LP64 DAS)
2948 - Netelligent 100 FDDI DAS Fibre SC
2949 - Netelligent 100 FDDI SAS Fibre SC
2950 - Netelligent 100 FDDI DAS UTP
2951 - Netelligent 100 FDDI SAS UTP
2952 - Netelligent 100 FDDI SAS Fibre MIC
2953
2954 Read <file:Documentation/networking/skfp.txt> for information about
2955 the driver.
2956
2957 Questions concerning this driver can be addressed to:
2958 <linux@syskonnect.de>
2959
2960 To compile this driver as a module, choose M here: the module
2961 will be called skfp. This is recommended.
2962
2963config HIPPI
2964 bool "HIPPI driver support (EXPERIMENTAL)"
Randy Dunlapcbcd2a42005-07-27 13:04:35 -07002965 depends on EXPERIMENTAL && INET && PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -07002966 help
2967 HIgh Performance Parallel Interface (HIPPI) is a 800Mbit/sec and
2968 1600Mbit/sec dual-simplex switched or point-to-point network. HIPPI
2969 can run over copper (25m) or fiber (300m on multi-mode or 10km on
2970 single-mode). HIPPI networks are commonly used for clusters and to
2971 connect to super computers. If you are connected to a HIPPI network
2972 and have a HIPPI network card in your computer that you want to use
2973 under Linux, say Y here (you must also remember to enable the driver
2974 for your HIPPI card below). Most people will say N here.
2975
2976config ROADRUNNER
2977 tristate "Essential RoadRunner HIPPI PCI adapter support (EXPERIMENTAL)"
2978 depends on HIPPI && PCI
2979 help
2980 Say Y here if this is your PCI HIPPI network card.
2981
2982 To compile this driver as a module, choose M here: the module
2983 will be called rrunner. If unsure, say N.
2984
2985config ROADRUNNER_LARGE_RINGS
2986 bool "Use large TX/RX rings (EXPERIMENTAL)"
2987 depends on ROADRUNNER
2988 help
2989 If you say Y here, the RoadRunner driver will preallocate up to 2 MB
2990 of additional memory to allow for fastest operation, both for
2991 transmitting and receiving. This memory cannot be used by any other
2992 kernel code or by user space programs. Say Y here only if you have
2993 the memory.
2994
2995config PLIP
2996 tristate "PLIP (parallel port) support"
Randy Dunlapcbcd2a42005-07-27 13:04:35 -07002997 depends on PARPORT
Linus Torvalds1da177e2005-04-16 15:20:36 -07002998 ---help---
2999 PLIP (Parallel Line Internet Protocol) is used to create a
3000 reasonably fast mini network consisting of two (or, rarely, more)
3001 local machines. A PLIP link from a Linux box is a popular means to
3002 install a Linux distribution on a machine which doesn't have a
3003 CD-ROM drive (a minimal system has to be transferred with floppies
3004 first). The kernels on both machines need to have this PLIP option
3005 enabled for this to work.
3006
3007 The PLIP driver has two modes, mode 0 and mode 1. The parallel
3008 ports (the connectors at the computers with 25 holes) are connected
3009 with "null printer" or "Turbo Laplink" cables which can transmit 4
3010 bits at a time (mode 0) or with special PLIP cables, to be used on
3011 bidirectional parallel ports only, which can transmit 8 bits at a
3012 time (mode 1); you can find the wiring of these cables in
3013 <file:Documentation/networking/PLIP.txt>. The cables can be up to
3014 15m long. Mode 0 works also if one of the machines runs DOS/Windows
3015 and has some PLIP software installed, e.g. the Crynwr PLIP packet
3016 driver (<http://oak.oakland.edu/simtel.net/msdos/pktdrvr-pre.html>)
3017 and winsock or NCSA's telnet.
3018
3019 If you want to use PLIP, say Y and read the PLIP mini-HOWTO as well
3020 as the NET-3-HOWTO, both available from
3021 <http://www.tldp.org/docs.html#howto>. Note that the PLIP
3022 protocol has been changed and this PLIP driver won't work together
3023 with the PLIP support in Linux versions 1.0.x. This option enlarges
3024 your kernel by about 8 KB.
3025
Adrian Bunk57ce45d2007-11-12 21:03:58 -08003026 To compile this driver as a module, choose M here. The module
3027 will be called plip. If unsure, say Y or M, in case you buy
3028 a laptop later.
Linus Torvalds1da177e2005-04-16 15:20:36 -07003029
3030config PPP
3031 tristate "PPP (point-to-point protocol) support"
Ralf Baechleb6e37e52006-07-14 12:15:40 +01003032 select SLHC
Linus Torvalds1da177e2005-04-16 15:20:36 -07003033 ---help---
3034 PPP (Point to Point Protocol) is a newer and better SLIP. It serves
3035 the same purpose: sending Internet traffic over telephone (and other
3036 serial) lines. Ask your access provider if they support it, because
3037 otherwise you can't use it; most Internet access providers these
3038 days support PPP rather than SLIP.
3039
3040 To use PPP, you need an additional program called pppd as described
3041 in the PPP-HOWTO, available at
3042 <http://www.tldp.org/docs.html#howto>. Make sure that you have
3043 the version of pppd recommended in <file:Documentation/Changes>.
3044 The PPP option enlarges your kernel by about 16 KB.
3045
3046 There are actually two versions of PPP: the traditional PPP for
3047 asynchronous lines, such as regular analog phone lines, and
3048 synchronous PPP which can be used over digital ISDN lines for
3049 example. If you want to use PPP over phone lines or other
3050 asynchronous serial lines, you need to say Y (or M) here and also to
3051 the next option, "PPP support for async serial ports". For PPP over
3052 synchronous lines, you should say Y (or M) here and to "Support
3053 synchronous PPP", below.
3054
3055 If you said Y to "Version information on all symbols" above, then
3056 you cannot compile the PPP driver into the kernel; you can then only
3057 compile it as a module. To compile this driver as a module, choose M
Adrian Bunk57ce45d2007-11-12 21:03:58 -08003058 here. The module will be called ppp_generic.
Linus Torvalds1da177e2005-04-16 15:20:36 -07003059
3060config PPP_MULTILINK
3061 bool "PPP multilink support (EXPERIMENTAL)"
3062 depends on PPP && EXPERIMENTAL
3063 help
3064 PPP multilink is a protocol (defined in RFC 1990) which allows you
3065 to combine several (logical or physical) lines into one logical PPP
3066 connection, so that you can utilize your full bandwidth.
3067
3068 This has to be supported at the other end as well and you need a
3069 version of the pppd daemon which understands the multilink protocol.
3070
3071 If unsure, say N.
3072
3073config PPP_FILTER
3074 bool "PPP filtering"
3075 depends on PPP
3076 help
3077 Say Y here if you want to be able to filter the packets passing over
3078 PPP interfaces. This allows you to control which packets count as
3079 activity (i.e. which packets will reset the idle timer or bring up
Jon Mason47c51432006-02-12 11:53:04 -06003080 a demand-dialed link) and which packets are to be dropped entirely.
Linus Torvalds1da177e2005-04-16 15:20:36 -07003081 You need to say Y here if you wish to use the pass-filter and
3082 active-filter options to pppd.
3083
3084 If unsure, say N.
3085
3086config PPP_ASYNC
3087 tristate "PPP support for async serial ports"
3088 depends on PPP
3089 select CRC_CCITT
3090 ---help---
3091 Say Y (or M) here if you want to be able to use PPP over standard
3092 asynchronous serial ports, such as COM1 or COM2 on a PC. If you use
3093 a modem (not a synchronous or ISDN modem) to contact your ISP, you
3094 need this option.
3095
3096 To compile this driver as a module, choose M here.
3097
3098 If unsure, say Y.
3099
3100config PPP_SYNC_TTY
3101 tristate "PPP support for sync tty ports"
3102 depends on PPP
3103 help
3104 Say Y (or M) here if you want to be able to use PPP over synchronous
3105 (HDLC) tty devices, such as the SyncLink adapter. These devices
3106 are often used for high-speed leased lines like T1/E1.
3107
3108 To compile this driver as a module, choose M here.
3109
3110config PPP_DEFLATE
3111 tristate "PPP Deflate compression"
3112 depends on PPP
3113 select ZLIB_INFLATE
3114 select ZLIB_DEFLATE
3115 ---help---
3116 Support for the Deflate compression method for PPP, which uses the
3117 Deflate algorithm (the same algorithm that gzip uses) to compress
3118 each PPP packet before it is sent over the wire. The machine at the
3119 other end of the PPP link (usually your ISP) has to support the
3120 Deflate compression method as well for this to be useful. Even if
3121 they don't support it, it is safe to say Y here.
3122
3123 To compile this driver as a module, choose M here.
3124
3125config PPP_BSDCOMP
3126 tristate "PPP BSD-Compress compression"
3127 depends on PPP
3128 ---help---
3129 Support for the BSD-Compress compression method for PPP, which uses
3130 the LZW compression method to compress each PPP packet before it is
3131 sent over the wire. The machine at the other end of the PPP link
3132 (usually your ISP) has to support the BSD-Compress compression
3133 method as well for this to be useful. Even if they don't support it,
3134 it is safe to say Y here.
3135
3136 The PPP Deflate compression method ("PPP Deflate compression",
3137 above) is preferable to BSD-Compress, because it compresses better
3138 and is patent-free.
3139
3140 Note that the BSD compression code will always be compiled as a
3141 module; it is called bsd_comp and will show up in the directory
3142 modules once you have said "make modules". If unsure, say N.
3143
Matt Domschb3f9b922005-11-08 09:40:47 -08003144config PPP_MPPE
3145 tristate "PPP MPPE compression (encryption) (EXPERIMENTAL)"
3146 depends on PPP && EXPERIMENTAL
3147 select CRYPTO
3148 select CRYPTO_SHA1
3149 select CRYPTO_ARC4
Patrick McHardybcbaecb2006-10-25 16:49:36 +10003150 select CRYPTO_ECB
Matt Domschb3f9b922005-11-08 09:40:47 -08003151 ---help---
3152 Support for the MPPE Encryption protocol, as employed by the
3153 Microsoft Point-to-Point Tunneling Protocol.
3154
3155 See http://pptpclient.sourceforge.net/ for information on
3156 configuring PPTP clients and servers to utilize this method.
3157
Linus Torvalds1da177e2005-04-16 15:20:36 -07003158config PPPOE
3159 tristate "PPP over Ethernet (EXPERIMENTAL)"
3160 depends on EXPERIMENTAL && PPP
3161 help
3162 Support for PPP over Ethernet.
3163
3164 This driver requires the latest version of pppd from the CVS
3165 repository at cvs.samba.org. Alternatively, see the
3166 RoaringPenguin package (<http://www.roaringpenguin.com/pppoe>)
3167 which contains instruction on how to use this driver (under
3168 the heading "Kernel mode PPPoE").
3169
3170config PPPOATM
3171 tristate "PPP over ATM"
3172 depends on ATM && PPP
3173 help
3174 Support PPP (Point to Point Protocol) encapsulated in ATM frames.
3175 This implementation does not yet comply with section 8 of RFC2364,
3176 which can lead to bad results if the ATM peer loses state and
3177 changes its encapsulation unilaterally.
3178
James Chapman3557baa2007-06-27 15:49:24 -07003179config PPPOL2TP
3180 tristate "PPP over L2TP (EXPERIMENTAL)"
James Chapmanfd558d12010-04-02 06:18:33 +00003181 depends on EXPERIMENTAL && L2TP && PPP
James Chapman3557baa2007-06-27 15:49:24 -07003182 help
3183 Support for PPP-over-L2TP socket family. L2TP is a protocol
3184 used by ISPs and enterprises to tunnel PPP traffic over UDP
3185 tunnels. L2TP is replacing PPTP for VPN uses.
3186
Linus Torvalds1da177e2005-04-16 15:20:36 -07003187config SLIP
3188 tristate "SLIP (serial line) support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07003189 ---help---
3190 Say Y if you intend to use SLIP or CSLIP (compressed SLIP) to
3191 connect to your Internet service provider or to connect to some
3192 other local Unix box or if you want to configure your Linux box as a
3193 Slip/CSlip server for other people to dial in. SLIP (Serial Line
3194 Internet Protocol) is a protocol used to send Internet traffic over
3195 serial connections such as telephone lines or null modem cables;
3196 nowadays, the protocol PPP is more commonly used for this same
3197 purpose.
3198
3199 Normally, your access provider has to support SLIP in order for you
3200 to be able to use it, but there is now a SLIP emulator called SLiRP
3201 around (available from
3202 <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
3203 allows you to use SLIP over a regular dial up shell connection. If
3204 you plan to use SLiRP, make sure to say Y to CSLIP, below. The
3205 NET-3-HOWTO, available from
3206 <http://www.tldp.org/docs.html#howto>, explains how to
3207 configure SLIP. Note that you don't need this option if you just
3208 want to run term (term is a program which gives you almost full
3209 Internet connectivity if you have a regular dial up shell account on
3210 some Internet connected Unix computer. Read
3211 <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>). SLIP
3212 support will enlarge your kernel by about 4 KB. If unsure, say N.
3213
Adrian Bunk57ce45d2007-11-12 21:03:58 -08003214 To compile this driver as a module, choose M here. The module
3215 will be called slip.
Linus Torvalds1da177e2005-04-16 15:20:36 -07003216
3217config SLIP_COMPRESSED
3218 bool "CSLIP compressed headers"
3219 depends on SLIP
Ralf Baechleb6e37e52006-07-14 12:15:40 +01003220 select SLHC
Linus Torvalds1da177e2005-04-16 15:20:36 -07003221 ---help---
3222 This protocol is faster than SLIP because it uses compression on the
3223 TCP/IP headers (not on the data itself), but it has to be supported
3224 on both ends. Ask your access provider if you are not sure and
3225 answer Y, just in case. You will still be able to use plain SLIP. If
3226 you plan to use SLiRP, the SLIP emulator (available from
3227 <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
3228 allows you to use SLIP over a regular dial up shell connection, you
3229 definitely want to say Y here. The NET-3-HOWTO, available from
3230 <http://www.tldp.org/docs.html#howto>, explains how to configure
3231 CSLIP. This won't enlarge your kernel.
3232
Ralf Baechleb6e37e52006-07-14 12:15:40 +01003233config SLHC
3234 tristate
3235 help
3236 This option enables Van Jacobsen serial line header compression
3237 routines.
3238
Linus Torvalds1da177e2005-04-16 15:20:36 -07003239config SLIP_SMART
3240 bool "Keepalive and linefill"
3241 depends on SLIP
3242 help
3243 Adds additional capabilities to the SLIP driver to support the
3244 RELCOM line fill and keepalive monitoring. Ideal on poor quality
3245 analogue lines.
3246
3247config SLIP_MODE_SLIP6
3248 bool "Six bit SLIP encapsulation"
3249 depends on SLIP
3250 help
3251 Just occasionally you may need to run IP over hostile serial
3252 networks that don't pass all control characters or are only seven
3253 bit. Saying Y here adds an extra mode you can use with SLIP:
3254 "slip6". In this mode, SLIP will only send normal ASCII symbols over
3255 the serial device. Naturally, this has to be supported at the other
3256 end of the link as well. It's good enough, for example, to run IP
3257 over the async ports of a Camtec JNT Pad. If unsure, say N.
3258
3259config NET_FC
3260 bool "Fibre Channel driver support"
Randy Dunlapcbcd2a42005-07-27 13:04:35 -07003261 depends on SCSI && PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -07003262 help
3263 Fibre Channel is a high speed serial protocol mainly used to connect
3264 large storage devices to the computer; it is compatible with and
3265 intended to replace SCSI.
3266
3267 If you intend to use Fibre Channel, you need to have a Fibre channel
3268 adaptor card in your computer; say Y here and to the driver for your
3269 adaptor below. You also should have said Y to "SCSI support" and
3270 "SCSI generic support".
3271
Linus Torvalds1da177e2005-04-16 15:20:36 -07003272config NETCONSOLE
Amerigo Wangecbacf82010-03-21 23:59:23 +00003273 tristate "Network console logging support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07003274 ---help---
3275 If you want to log kernel messages over the network, enable this.
3276 See <file:Documentation/networking/netconsole.txt> for details.
3277
Satyam Sharma0bcc1812007-08-10 15:35:05 -07003278config NETCONSOLE_DYNAMIC
Amerigo Wangecbacf82010-03-21 23:59:23 +00003279 bool "Dynamic reconfiguration of logging targets"
3280 depends on NETCONSOLE && SYSFS
Satyam Sharma0bcc1812007-08-10 15:35:05 -07003281 select CONFIGFS_FS
3282 help
3283 This option enables the ability to dynamically reconfigure target
3284 parameters (interface, IP addresses, port numbers, MAC addresses)
3285 at runtime through a userspace interface exported using configfs.
3286 See <file:Documentation/networking/netconsole.txt> for details.
3287
Randy Dunlap54208992005-07-18 13:45:12 -07003288config NETPOLL
3289 def_bool NETCONSOLE
3290
Randy Dunlap54208992005-07-18 13:45:12 -07003291config NETPOLL_TRAP
3292 bool "Netpoll traffic trapping"
3293 default n
3294 depends on NETPOLL
3295
3296config NET_POLL_CONTROLLER
3297 def_bool NETPOLL
3298
Rusty Russell296f96f2007-10-22 11:03:37 +10003299config VIRTIO_NET
3300 tristate "Virtio network driver (EXPERIMENTAL)"
3301 depends on EXPERIMENTAL && VIRTIO
3302 ---help---
Anthony Liguori0ad07ec2007-11-07 20:46:31 -06003303 This is the virtual network driver for virtio. It can be used with
3304 lguest or QEMU based VMMs (like KVM or Xen). Say Y or M.
Rusty Russell296f96f2007-10-22 11:03:37 +10003305
Shreyas Bhatewarad1a890fa2009-10-13 00:15:51 -07003306config VMXNET3
3307 tristate "VMware VMXNET3 ethernet driver"
Shreyas Bhatewara115924b2009-11-16 13:41:33 +00003308 depends on PCI && INET
Shreyas Bhatewarad1a890fa2009-10-13 00:15:51 -07003309 help
3310 This driver supports VMware's vmxnet3 virtual ethernet NIC.
3311 To compile this driver as a module, choose M here: the
3312 module will be called vmxnet3.
3313
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07003314endif # NETDEVICES