drivers/scsi/aacraid/linit.c

/*
 *	Adaptec AAC series RAID controller driver
 *	(c) Copyright 2001 Red Hat Inc.
 *
 * based on the old aacraid driver that is..
 * Adaptec aacraid device driver for Linux.
 *
 * Copyright (c) 2000-2010 Adaptec, Inc.
 *               2010 PMC-Sierra, Inc. (aacraid@pmc-sierra.com)
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2, or (at your option)
 * any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; see the file COPYING.  If not, write to
 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 * Module Name:
 *   linit.c
 *
 * Abstract: Linux Driver entry module for Adaptec RAID Array Controller
 */


#include <linux/compat.h>
#include <linux/blkdev.h>
#include <linux/completion.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/pci.h>
#include <linux/pci-aspm.h>
#include <linux/slab.h>
#include <linux/mutex.h>
#include <linux/spinlock.h>
#include <linux/syscalls.h>
#include <linux/delay.h>
#include <linux/kthread.h>

#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsicam.h>
#include <scsi/scsi_eh.h>

#include "aacraid.h"

#define AAC_DRIVER_VERSION		"1.2-0"
#ifndef AAC_DRIVER_BRANCH
#define AAC_DRIVER_BRANCH		""
#endif
#define AAC_DRIVERNAME			"aacraid"

#ifdef AAC_DRIVER_BUILD
#define _str(x) #x
#define str(x) _str(x)
#define AAC_DRIVER_FULL_VERSION	AAC_DRIVER_VERSION "[" str(AAC_DRIVER_BUILD) "]" AAC_DRIVER_BRANCH
#else
#define AAC_DRIVER_FULL_VERSION	AAC_DRIVER_VERSION AAC_DRIVER_BRANCH
#endif

MODULE_AUTHOR("Red Hat Inc and Adaptec");
MODULE_DESCRIPTION("Dell PERC2, 2/Si, 3/Si, 3/Di, "
		   "Adaptec Advanced Raid Products, "
		   "HP NetRAID-4M, IBM ServeRAID & ICP SCSI driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(AAC_DRIVER_FULL_VERSION);

static DEFINE_MUTEX(aac_mutex);
static LIST_HEAD(aac_devices);
static int aac_cfg_major = -1;
char aac_driver_version[] = AAC_DRIVER_FULL_VERSION;

/*
 * Because of the way Linux names scsi devices, the order in this table has
 * become important.  Check for on-board Raid first, add-in cards second.
 *
 * Note: The last field is used to index into aac_drivers below.
 */
static const struct pci_device_id aac_pci_tbl[] = {
	{ 0x1028, 0x0001, 0x1028, 0x0001, 0, 0, 0 }, /* PERC 2/Si (Iguana/PERC2Si) */
	{ 0x1028, 0x0002, 0x1028, 0x0002, 0, 0, 1 }, /* PERC 3/Di (Opal/PERC3Di) */
	{ 0x1028, 0x0003, 0x1028, 0x0003, 0, 0, 2 }, /* PERC 3/Si (SlimFast/PERC3Si */
	{ 0x1028, 0x0004, 0x1028, 0x00d0, 0, 0, 3 }, /* PERC 3/Di (Iguana FlipChip/PERC3DiF */
	{ 0x1028, 0x0002, 0x1028, 0x00d1, 0, 0, 4 }, /* PERC 3/Di (Viper/PERC3DiV) */
	{ 0x1028, 0x0002, 0x1028, 0x00d9, 0, 0, 5 }, /* PERC 3/Di (Lexus/PERC3DiL) */
	{ 0x1028, 0x000a, 0x1028, 0x0106, 0, 0, 6 }, /* PERC 3/Di (Jaguar/PERC3DiJ) */
	{ 0x1028, 0x000a, 0x1028, 0x011b, 0, 0, 7 }, /* PERC 3/Di (Dagger/PERC3DiD) */
	{ 0x1028, 0x000a, 0x1028, 0x0121, 0, 0, 8 }, /* PERC 3/Di (Boxster/PERC3DiB) */
	{ 0x9005, 0x0283, 0x9005, 0x0283, 0, 0, 9 }, /* catapult */
	{ 0x9005, 0x0284, 0x9005, 0x0284, 0, 0, 10 }, /* tomcat */
	{ 0x9005, 0x0285, 0x9005, 0x0286, 0, 0, 11 }, /* Adaptec 2120S (Crusader) */
	{ 0x9005, 0x0285, 0x9005, 0x0285, 0, 0, 12 }, /* Adaptec 2200S (Vulcan) */
	{ 0x9005, 0x0285, 0x9005, 0x0287, 0, 0, 13 }, /* Adaptec 2200S (Vulcan-2m) */
	{ 0x9005, 0x0285, 0x17aa, 0x0286, 0, 0, 14 }, /* Legend S220 (Legend Crusader) */
	{ 0x9005, 0x0285, 0x17aa, 0x0287, 0, 0, 15 }, /* Legend S230 (Legend Vulcan) */

	{ 0x9005, 0x0285, 0x9005, 0x0288, 0, 0, 16 }, /* Adaptec 3230S (Harrier) */
	{ 0x9005, 0x0285, 0x9005, 0x0289, 0, 0, 17 }, /* Adaptec 3240S (Tornado) */
	{ 0x9005, 0x0285, 0x9005, 0x028a, 0, 0, 18 }, /* ASR-2020ZCR SCSI PCI-X ZCR (Skyhawk) */
	{ 0x9005, 0x0285, 0x9005, 0x028b, 0, 0, 19 }, /* ASR-2025ZCR SCSI SO-DIMM PCI-X ZCR (Terminator) */
	{ 0x9005, 0x0286, 0x9005, 0x028c, 0, 0, 20 }, /* ASR-2230S + ASR-2230SLP PCI-X (Lancer) */
	{ 0x9005, 0x0286, 0x9005, 0x028d, 0, 0, 21 }, /* ASR-2130S (Lancer) */
	{ 0x9005, 0x0286, 0x9005, 0x029b, 0, 0, 22 }, /* AAR-2820SA (Intruder) */
	{ 0x9005, 0x0286, 0x9005, 0x029c, 0, 0, 23 }, /* AAR-2620SA (Intruder) */
	{ 0x9005, 0x0286, 0x9005, 0x029d, 0, 0, 24 }, /* AAR-2420SA (Intruder) */
	{ 0x9005, 0x0286, 0x9005, 0x029e, 0, 0, 25 }, /* ICP9024RO (Lancer) */
	{ 0x9005, 0x0286, 0x9005, 0x029f, 0, 0, 26 }, /* ICP9014RO (Lancer) */
	{ 0x9005, 0x0286, 0x9005, 0x02a0, 0, 0, 27 }, /* ICP9047MA (Lancer) */
	{ 0x9005, 0x0286, 0x9005, 0x02a1, 0, 0, 28 }, /* ICP9087MA (Lancer) */
	{ 0x9005, 0x0286, 0x9005, 0x02a3, 0, 0, 29 }, /* ICP5445AU (Hurricane44) */
	{ 0x9005, 0x0285, 0x9005, 0x02a4, 0, 0, 30 }, /* ICP9085LI (Marauder-X) */
	{ 0x9005, 0x0285, 0x9005, 0x02a5, 0, 0, 31 }, /* ICP5085BR (Marauder-E) */
	{ 0x9005, 0x0286, 0x9005, 0x02a6, 0, 0, 32 }, /* ICP9067MA (Intruder-6) */
	{ 0x9005, 0x0287, 0x9005, 0x0800, 0, 0, 33 }, /* Themisto Jupiter Platform */
	{ 0x9005, 0x0200, 0x9005, 0x0200, 0, 0, 33 }, /* Themisto Jupiter Platform */
	{ 0x9005, 0x0286, 0x9005, 0x0800, 0, 0, 34 }, /* Callisto Jupiter Platform */
	{ 0x9005, 0x0285, 0x9005, 0x028e, 0, 0, 35 }, /* ASR-2020SA SATA PCI-X ZCR (Skyhawk) */
	{ 0x9005, 0x0285, 0x9005, 0x028f, 0, 0, 36 }, /* ASR-2025SA SATA SO-DIMM PCI-X ZCR (Terminator) */
	{ 0x9005, 0x0285, 0x9005, 0x0290, 0, 0, 37 }, /* AAR-2410SA PCI SATA 4ch (Jaguar II) */
	{ 0x9005, 0x0285, 0x1028, 0x0291, 0, 0, 38 }, /* CERC SATA RAID 2 PCI SATA 6ch (DellCorsair) */
	{ 0x9005, 0x0285, 0x9005, 0x0292, 0, 0, 39 }, /* AAR-2810SA PCI SATA 8ch (Corsair-8) */
	{ 0x9005, 0x0285, 0x9005, 0x0293, 0, 0, 40 }, /* AAR-21610SA PCI SATA 16ch (Corsair-16) */
	{ 0x9005, 0x0285, 0x9005, 0x0294, 0, 0, 41 }, /* ESD SO-DIMM PCI-X SATA ZCR (Prowler) */
	{ 0x9005, 0x0285, 0x103C, 0x3227, 0, 0, 42 }, /* AAR-2610SA PCI SATA 6ch */
	{ 0x9005, 0x0285, 0x9005, 0x0296, 0, 0, 43 }, /* ASR-2240S (SabreExpress) */
	{ 0x9005, 0x0285, 0x9005, 0x0297, 0, 0, 44 }, /* ASR-4005 */
	{ 0x9005, 0x0285, 0x1014, 0x02F2, 0, 0, 45 }, /* IBM 8i (AvonPark) */
	{ 0x9005, 0x0285, 0x1014, 0x0312, 0, 0, 45 }, /* IBM 8i (AvonPark Lite) */
	{ 0x9005, 0x0286, 0x1014, 0x9580, 0, 0, 46 }, /* IBM 8k/8k-l8 (Aurora) */
	{ 0x9005, 0x0286, 0x1014, 0x9540, 0, 0, 47 }, /* IBM 8k/8k-l4 (Aurora Lite) */
	{ 0x9005, 0x0285, 0x9005, 0x0298, 0, 0, 48 }, /* ASR-4000 (BlackBird) */
	{ 0x9005, 0x0285, 0x9005, 0x0299, 0, 0, 49 }, /* ASR-4800SAS (Marauder-X) */
	{ 0x9005, 0x0285, 0x9005, 0x029a, 0, 0, 50 }, /* ASR-4805SAS (Marauder-E) */
	{ 0x9005, 0x0286, 0x9005, 0x02a2, 0, 0, 51 }, /* ASR-3800 (Hurricane44) */

	{ 0x9005, 0x0285, 0x1028, 0x0287, 0, 0, 52 }, /* Perc 320/DC*/
	{ 0x1011, 0x0046, 0x9005, 0x0365, 0, 0, 53 }, /* Adaptec 5400S (Mustang)*/
	{ 0x1011, 0x0046, 0x9005, 0x0364, 0, 0, 54 }, /* Adaptec 5400S (Mustang)*/
	{ 0x1011, 0x0046, 0x9005, 0x1364, 0, 0, 55 }, /* Dell PERC2/QC */
	{ 0x1011, 0x0046, 0x103c, 0x10c2, 0, 0, 56 }, /* HP NetRAID-4M */

	{ 0x9005, 0x0285, 0x1028, PCI_ANY_ID, 0, 0, 57 }, /* Dell Catchall */
	{ 0x9005, 0x0285, 0x17aa, PCI_ANY_ID, 0, 0, 58 }, /* Legend Catchall */
	{ 0x9005, 0x0285, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 59 }, /* Adaptec Catch All */
	{ 0x9005, 0x0286, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 60 }, /* Adaptec Rocket Catch All */
	{ 0x9005, 0x0288, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 61 }, /* Adaptec NEMER/ARK Catch All */
	{ 0x9005, 0x028b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 62 }, /* Adaptec PMC Series 6 (Tupelo) */
	{ 0x9005, 0x028c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 63 }, /* Adaptec PMC Series 7 (Denali) */
	{ 0x9005, 0x028d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 64 }, /* Adaptec PMC Series 8 */
	{ 0x9005, 0x028f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 65 }, /* Adaptec PMC Series 9 */
	{ 0,}
};
MODULE_DEVICE_TABLE(pci, aac_pci_tbl);

/*
 * dmb - For now we add the number of channels to this structure.
 * In the future we should add a fib that reports the number of channels
 * for the card.  At that time we can remove the channels from here
 */
static struct aac_driver_ident aac_drivers[] = {
	{ aac_rx_init, "percraid", "DELL    ", "PERCRAID        ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 2/Si (Iguana/PERC2Si) */
	{ aac_rx_init, "percraid", "DELL    ", "PERCRAID        ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 3/Di (Opal/PERC3Di) */
	{ aac_rx_init, "percraid", "DELL    ", "PERCRAID        ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 3/Si (SlimFast/PERC3Si */
	{ aac_rx_init, "percraid", "DELL    ", "PERCRAID        ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 3/Di (Iguana FlipChip/PERC3DiF */
	{ aac_rx_init, "percraid", "DELL    ", "PERCRAID        ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 3/Di (Viper/PERC3DiV) */
	{ aac_rx_init, "percraid", "DELL    ", "PERCRAID        ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 3/Di (Lexus/PERC3DiL) */
	{ aac_rx_init, "percraid", "DELL    ", "PERCRAID        ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 3/Di (Jaguar/PERC3DiJ) */
	{ aac_rx_init, "percraid", "DELL    ", "PERCRAID        ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 3/Di (Dagger/PERC3DiD) */
	{ aac_rx_init, "percraid", "DELL    ", "PERCRAID        ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 3/Di (Boxster/PERC3DiB) */
	{ aac_rx_init, "aacraid",  "ADAPTEC ", "catapult        ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* catapult */
	{ aac_rx_init, "aacraid",  "ADAPTEC ", "tomcat          ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* tomcat */
	{ aac_rx_init, "aacraid",  "ADAPTEC ", "Adaptec 2120S   ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG },		      /* Adaptec 2120S (Crusader) */
	{ aac_rx_init, "aacraid",  "ADAPTEC ", "Adaptec 2200S   ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG },		      /* Adaptec 2200S (Vulcan) */
	{ aac_rx_init, "aacraid",  "ADAPTEC ", "Adaptec 2200S   ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2200S (Vulcan-2m) */
	{ aac_rx_init, "aacraid",  "Legend  ", "Legend S220     ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Legend S220 (Legend Crusader) */
	{ aac_rx_init, "aacraid",  "Legend  ", "Legend S230     ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Legend S230 (Legend Vulcan) */

	{ aac_rx_init, "aacraid",  "ADAPTEC ", "Adaptec 3230S   ", 2 }, /* Adaptec 3230S (Harrier) */
	{ aac_rx_init, "aacraid",  "ADAPTEC ", "Adaptec 3240S   ", 2 }, /* Adaptec 3240S (Tornado) */
	{ aac_rx_init, "aacraid",  "ADAPTEC ", "ASR-2020ZCR     ", 2 }, /* ASR-2020ZCR SCSI PCI-X ZCR (Skyhawk) */
	{ aac_rx_init, "aacraid",  "ADAPTEC ", "ASR-2025ZCR     ", 2 }, /* ASR-2025ZCR SCSI SO-DIMM PCI-X ZCR (Terminator) */
	{ aac_rkt_init, "aacraid",  "ADAPTEC ", "ASR-2230S PCI-X ", 2 }, /* ASR-2230S + ASR-2230SLP PCI-X (Lancer) */
	{ aac_rkt_init, "aacraid",  "ADAPTEC ", "ASR-2130S PCI-X ", 1 }, /* ASR-2130S (Lancer) */
	{ aac_rkt_init, "aacraid",  "ADAPTEC ", "AAR-2820SA      ", 1 }, /* AAR-2820SA (Intruder) */
	{ aac_rkt_init, "aacraid",  "ADAPTEC ", "AAR-2620SA      ", 1 }, /* AAR-2620SA (Intruder) */
	{ aac_rkt_init, "aacraid",  "ADAPTEC ", "AAR-2420SA      ", 1 }, /* AAR-2420SA (Intruder) */
	{ aac_rkt_init, "aacraid",  "ICP     ", "ICP9024RO       ", 2 }, /* ICP9024RO (Lancer) */
	{ aac_rkt_init, "aacraid",  "ICP     ", "ICP9014RO       ", 1 }, /* ICP9014RO (Lancer) */
	{ aac_rkt_init, "aacraid",  "ICP     ", "ICP9047MA       ", 1 }, /* ICP9047MA (Lancer) */
	{ aac_rkt_init, "aacraid",  "ICP     ", "ICP9087MA       ", 1 }, /* ICP9087MA (Lancer) */
	{ aac_rkt_init, "aacraid",  "ICP     ", "ICP5445AU       ", 1 }, /* ICP5445AU (Hurricane44) */
	{ aac_rx_init, "aacraid",  "ICP     ", "ICP9085LI       ", 1 }, /* ICP9085LI (Marauder-X) */
	{ aac_rx_init, "aacraid",  "ICP     ", "ICP5085BR       ", 1 }, /* ICP5085BR (Marauder-E) */
	{ aac_rkt_init, "aacraid",  "ICP     ", "ICP9067MA       ", 1 }, /* ICP9067MA (Intruder-6) */
	{ NULL        , "aacraid",  "ADAPTEC ", "Themisto        ", 0, AAC_QUIRK_SLAVE }, /* Jupiter Platform */
	{ aac_rkt_init, "aacraid",  "ADAPTEC ", "Callisto        ", 2, AAC_QUIRK_MASTER }, /* Jupiter Platform */
	{ aac_rx_init, "aacraid",  "ADAPTEC ", "ASR-2020SA       ", 1 }, /* ASR-2020SA SATA PCI-X ZCR (Skyhawk) */
	{ aac_rx_init, "aacraid",  "ADAPTEC ", "ASR-2025SA       ", 1 }, /* ASR-2025SA SATA SO-DIMM PCI-X ZCR (Terminator) */
	{ aac_rx_init, "aacraid",  "ADAPTEC ", "AAR-2410SA SATA ", 1, AAC_QUIRK_17SG }, /* AAR-2410SA PCI SATA 4ch (Jaguar II) */
	{ aac_rx_init, "aacraid",  "DELL    ", "CERC SR2        ", 1, AAC_QUIRK_17SG }, /* CERC SATA RAID 2 PCI SATA 6ch (DellCorsair) */
	{ aac_rx_init, "aacraid",  "ADAPTEC ", "AAR-2810SA SATA ", 1, AAC_QUIRK_17SG }, /* AAR-2810SA PCI SATA 8ch (Corsair-8) */
	{ aac_rx_init, "aacraid",  "ADAPTEC ", "AAR-21610SA SATA", 1, AAC_QUIRK_17SG }, /* AAR-21610SA PCI SATA 16ch (Corsair-16) */
	{ aac_rx_init, "aacraid",  "ADAPTEC ", "ASR-2026ZCR     ", 1 }, /* ESD SO-DIMM PCI-X SATA ZCR (Prowler) */
	{ aac_rx_init, "aacraid",  "ADAPTEC ", "AAR-2610SA      ", 1 }, /* SATA 6Ch (Bearcat) */
	{ aac_rx_init, "aacraid",  "ADAPTEC ", "ASR-2240S       ", 1 }, /* ASR-2240S (SabreExpress) */
	{ aac_rx_init, "aacraid",  "ADAPTEC ", "ASR-4005        ", 1 }, /* ASR-4005 */
	{ aac_rx_init, "ServeRAID","IBM     ", "ServeRAID 8i    ", 1 }, /* IBM 8i (AvonPark) */
	{ aac_rkt_init, "ServeRAID","IBM     ", "ServeRAID 8k-l8 ", 1 }, /* IBM 8k/8k-l8 (Aurora) */
	{ aac_rkt_init, "ServeRAID","IBM     ", "ServeRAID 8k-l4 ", 1 }, /* IBM 8k/8k-l4 (Aurora Lite) */
	{ aac_rx_init, "aacraid",  "ADAPTEC ", "ASR-4000        ", 1 }, /* ASR-4000 (BlackBird & AvonPark) */
	{ aac_rx_init, "aacraid",  "ADAPTEC ", "ASR-4800SAS     ", 1 }, /* ASR-4800SAS (Marauder-X) */
	{ aac_rx_init, "aacraid",  "ADAPTEC ", "ASR-4805SAS     ", 1 }, /* ASR-4805SAS (Marauder-E) */
	{ aac_rkt_init, "aacraid",  "ADAPTEC ", "ASR-3800        ", 1 }, /* ASR-3800 (Hurricane44) */

	{ aac_rx_init, "percraid", "DELL    ", "PERC 320/DC     ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Perc 320/DC*/
	{ aac_sa_init, "aacraid",  "ADAPTEC ", "Adaptec 5400S   ", 4, AAC_QUIRK_34SG }, /* Adaptec 5400S (Mustang)*/
	{ aac_sa_init, "aacraid",  "ADAPTEC ", "AAC-364         ", 4, AAC_QUIRK_34SG }, /* Adaptec 5400S (Mustang)*/
	{ aac_sa_init, "percraid", "DELL    ", "PERCRAID        ", 4, AAC_QUIRK_34SG }, /* Dell PERC2/QC */
	{ aac_sa_init, "hpnraid",  "HP      ", "NetRAID         ", 4, AAC_QUIRK_34SG }, /* HP NetRAID-4M */

	{ aac_rx_init, "aacraid",  "DELL    ", "RAID            ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Dell Catchall */
	{ aac_rx_init, "aacraid",  "Legend  ", "RAID            ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Legend Catchall */
	{ aac_rx_init, "aacraid",  "ADAPTEC ", "RAID            ", 2 }, /* Adaptec Catch All */
	{ aac_rkt_init, "aacraid", "ADAPTEC ", "RAID            ", 2 }, /* Adaptec Rocket Catch All */
	{ aac_nark_init, "aacraid", "ADAPTEC ", "RAID           ", 2 }, /* Adaptec NEMER/ARK Catch All */
	{ aac_src_init, "aacraid", "ADAPTEC ", "RAID            ", 2 }, /* Adaptec PMC Series 6 (Tupelo) */
	{ aac_srcv_init, "aacraid", "ADAPTEC ", "RAID            ", 2 }, /* Adaptec PMC Series 7 (Denali) */
	{ aac_srcv_init, "aacraid", "ADAPTEC ", "RAID            ", 2 }, /* Adaptec PMC Series 8 */
	{ aac_srcv_init, "aacraid", "ADAPTEC ", "RAID            ", 2 } /* Adaptec PMC Series 9 */
};

/**
 *	aac_queuecommand	-	queue a SCSI command
 *	@cmd:		SCSI command to queue
 *	@done:		Function to call on command completion
 *
 *	Queues a command for execution by the associated Host Adapter.
 *
 *	TODO: unify with aac_scsi_cmd().
 */

static int aac_queuecommand_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
{
	struct Scsi_Host *host = cmd->device->host;
	struct aac_dev *dev = (struct aac_dev *)host->hostdata;
	u32 count = 0;
	cmd->scsi_done = done;
	for (; count < (host->can_queue + AAC_NUM_MGT_FIB); ++count) {
		struct fib * fib = &dev->fibs[count];
		struct scsi_cmnd * command;
		if (fib->hw_fib_va->header.XferState &&
		    ((command = fib->callback_data)) &&
		    (command == cmd) &&
		    (cmd->SCp.phase == AAC_OWNER_FIRMWARE))
			return 0; /* Already owned by Adapter */
	}
	cmd->SCp.phase = AAC_OWNER_LOWLEVEL;
	return (aac_scsi_cmd(cmd) ? FAILED : 0);
}

static DEF_SCSI_QCMD(aac_queuecommand)

/**
 *	aac_info		-	Returns the host adapter name
 *	@shost:		Scsi host to report on
 *
 *	Returns a static string describing the device in question
 */

static const char *aac_info(struct Scsi_Host *shost)
{
	struct aac_dev *dev = (struct aac_dev *)shost->hostdata;
	return aac_drivers[dev->cardtype].name;
}

/**
 *	aac_get_driver_ident
 *	@devtype: index into lookup table
 *
 *	Returns a pointer to the entry in the driver lookup table.
 */

struct aac_driver_ident* aac_get_driver_ident(int devtype)
{
	return &aac_drivers[devtype];
}

/**
 *	aac_biosparm	-	return BIOS parameters for disk
 *	@sdev: The scsi device corresponding to the disk
 *	@bdev: the block device corresponding to the disk
 *	@capacity: the sector capacity of the disk
 *	@geom: geometry block to fill in
 *
 *	Return the Heads/Sectors/Cylinders BIOS Disk Parameters for Disk.
 *	The default disk geometry is 64 heads, 32 sectors, and the appropriate
 *	number of cylinders so as not to exceed drive capacity.  In order for
 *	disks equal to or larger than 1 GB to be addressable by the BIOS
 *	without exceeding the BIOS limitation of 1024 cylinders, Extended
 *	Translation should be enabled.   With Extended Translation enabled,
 *	drives between 1 GB inclusive and 2 GB exclusive are given a disk
 *	geometry of 128 heads and 32 sectors, and drives above 2 GB inclusive
 *	are given a disk geometry of 255 heads and 63 sectors.  However, if
 *	the BIOS detects that the Extended Translation setting does not match
 *	the geometry in the partition table, then the translation inferred
 *	from the partition table will be used by the BIOS, and a warning may
 *	be displayed.
 */

static int aac_biosparm(struct scsi_device *sdev, struct block_device *bdev,
			sector_t capacity, int *geom)
{
	struct diskparm *param = (struct diskparm *)geom;
	unsigned char *buf;

	dprintk((KERN_DEBUG "aac_biosparm.\n"));

	/*
	 *	Assuming extended translation is enabled - #REVISIT#
	 */
	if (capacity >= 2 * 1024 * 1024) { /* 1 GB in 512 byte sectors */
		if(capacity >= 4 * 1024 * 1024) { /* 2 GB in 512 byte sectors */
			param->heads = 255;
			param->sectors = 63;
		} else {
			param->heads = 128;
			param->sectors = 32;
		}
	} else {
		param->heads = 64;
		param->sectors = 32;
	}

	param->cylinders = cap_to_cyls(capacity, param->heads * param->sectors);

	/*
	 *	Read the first 1024 bytes from the disk device, if the boot
	 *	sector partition table is valid, search for a partition table
	 *	entry whose end_head matches one of the standard geometry
	 *	translations ( 64/32, 128/32, 255/63 ).
	 */
	buf = scsi_bios_ptable(bdev);
	if (!buf)
		return 0;
	if(*(__le16 *)(buf + 0x40) == cpu_to_le16(0xaa55)) {
		struct partition *first = (struct partition * )buf;
		struct partition *entry = first;
		int saved_cylinders = param->cylinders;
		int num;
		unsigned char end_head, end_sec;

		for(num = 0; num < 4; num++) {
			end_head = entry->end_head;
			end_sec = entry->end_sector & 0x3f;

			if(end_head == 63) {
				param->heads = 64;
				param->sectors = 32;
				break;
			} else if(end_head == 127) {
				param->heads = 128;
				param->sectors = 32;
				break;
			} else if(end_head == 254) {
				param->heads = 255;
				param->sectors = 63;
				break;
			}
			entry++;
		}

		if (num == 4) {
			end_head = first->end_head;
			end_sec = first->end_sector & 0x3f;
		}

		param->cylinders = cap_to_cyls(capacity, param->heads * param->sectors);
		if (num < 4 && end_sec == param->sectors) {
			if (param->cylinders != saved_cylinders)
				dprintk((KERN_DEBUG "Adopting geometry: heads=%d, sectors=%d from partition table %d.\n",
					param->heads, param->sectors, num));
		} else if (end_head > 0 || end_sec > 0) {
			dprintk((KERN_DEBUG "Strange geometry: heads=%d, sectors=%d in partition table %d.\n",
				end_head + 1, end_sec, num));
			dprintk((KERN_DEBUG "Using geometry: heads=%d, sectors=%d.\n",
					param->heads, param->sectors));
		}
	}
	kfree(buf);
	return 0;
}

/**
 *	aac_slave_configure		-	compute queue depths
 *	@sdev:	SCSI device we are considering
 *
 *	Selects queue depths for each target device based on the host adapter's
 *	total capacity and the queue depth supported by the target device.
 *	A queue depth of one automatically disables tagged queueing.
 */

static int aac_slave_configure(struct scsi_device *sdev)
{
	struct aac_dev *aac = (struct aac_dev *)sdev->host->hostdata;
	if (aac->jbod && (sdev->type == TYPE_DISK))
		sdev->removable = 1;
	if ((sdev->type == TYPE_DISK) &&
			(sdev_channel(sdev) != CONTAINER_CHANNEL) &&
			(!aac->jbod || sdev->inq_periph_qual) &&
			(!aac->raid_scsi_mode || (sdev_channel(sdev) != 2))) {
		if (expose_physicals == 0)
			return -ENXIO;
		if (expose_physicals < 0)
			sdev->no_uld_attach = 1;
	}
	if (sdev->tagged_supported && (sdev->type == TYPE_DISK) &&
			(!aac->raid_scsi_mode || (sdev_channel(sdev) != 2)) &&
			!sdev->no_uld_attach) {
		struct scsi_device * dev;
		struct Scsi_Host *host = sdev->host;
		unsigned num_lsu = 0;
		unsigned num_one = 0;
		unsigned depth;
		unsigned cid;

		/*
		 * Firmware has an individual device recovery time typically
		 * of 35 seconds, give us a margin.
		 */
		if (sdev->request_queue->rq_timeout < (45 * HZ))
			blk_queue_rq_timeout(sdev->request_queue, 45*HZ);
		for (cid = 0; cid < aac->maximum_num_containers; ++cid)
			if (aac->fsa_dev[cid].valid)
				++num_lsu;
		__shost_for_each_device(dev, host) {
			if (dev->tagged_supported && (dev->type == TYPE_DISK) &&
					(!aac->raid_scsi_mode ||
						(sdev_channel(sdev) != 2)) &&
					!dev->no_uld_attach) {
				if ((sdev_channel(dev) != CONTAINER_CHANNEL)
				 || !aac->fsa_dev[sdev_id(dev)].valid)
					++num_lsu;
			} else
				++num_one;
		}
		if (num_lsu == 0)
			++num_lsu;
		depth = (host->can_queue - num_one) / num_lsu;
		if (depth > 256)
			depth = 256;
		else if (depth < 2)
			depth = 2;
		scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, depth);
	} else
		scsi_adjust_queue_depth(sdev, 0, 1);

	return 0;
}

/**
 *	aac_change_queue_depth		-	alter queue depths
 *	@sdev:	SCSI device we are considering
 *	@depth:	desired queue depth
 *
 *	Alters queue depths for target device based on the host adapter's
 *	total capacity and the queue depth supported by the target device.
 */

static int aac_change_queue_depth(struct scsi_device *sdev, int depth,
				  int reason)
{
	if (reason != SCSI_QDEPTH_DEFAULT)
		return -EOPNOTSUPP;

	if (sdev->tagged_supported && (sdev->type == TYPE_DISK) &&
	    (sdev_channel(sdev) == CONTAINER_CHANNEL)) {
		struct scsi_device * dev;
		struct Scsi_Host *host = sdev->host;
		unsigned num = 0;

		__shost_for_each_device(dev, host) {
			if (dev->tagged_supported && (dev->type == TYPE_DISK) &&
			    (sdev_channel(dev) == CONTAINER_CHANNEL))
				++num;
			++num;
		}
		if (num >= host->can_queue)
			num = host->can_queue - 1;
		if (depth > (host->can_queue - num))
			depth = host->can_queue - num;
		if (depth > 256)
			depth = 256;
		else if (depth < 2)
			depth = 2;
		scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, depth);
	} else
		scsi_adjust_queue_depth(sdev, 0, 1);
	return sdev->queue_depth;
}

static ssize_t aac_show_raid_level(struct device *dev, struct device_attribute *attr, char *buf)
{
	struct scsi_device *sdev = to_scsi_device(dev);
	struct aac_dev *aac = (struct aac_dev *)(sdev->host->hostdata);
	if (sdev_channel(sdev) != CONTAINER_CHANNEL)
		return snprintf(buf, PAGE_SIZE, sdev->no_uld_attach
		  ? "Hidden\n" :
		  ((aac->jbod && (sdev->type == TYPE_DISK)) ? "JBOD\n" : ""));
	return snprintf(buf, PAGE_SIZE, "%s\n",
	  get_container_type(aac->fsa_dev[sdev_id(sdev)].type));
}

static struct device_attribute aac_raid_level_attr = {
	.attr = {
		.name = "level",
		.mode = S_IRUGO,
	},
	.show = aac_show_raid_level
};

static struct device_attribute *aac_dev_attrs[] = {
	&aac_raid_level_attr,
	NULL,
};

static int aac_ioctl(struct scsi_device *sdev, int cmd, void __user * arg)
{
	struct aac_dev *dev = (struct aac_dev *)sdev->host->hostdata;
	if (!capable(CAP_SYS_RAWIO))
		return -EPERM;
	return aac_do_ioctl(dev, cmd, arg);
}

static int aac_eh_abort(struct scsi_cmnd* cmd)
{
	struct scsi_device * dev = cmd->device;
	struct Scsi_Host * host = dev->host;
	struct aac_dev * aac = (struct aac_dev *)host->hostdata;
	int count;
	int ret = FAILED;

	printk(KERN_ERR "%s: Host adapter abort request (%d,%d,%d,%d)\n",
		AAC_DRIVERNAME,
		host->host_no, sdev_channel(dev), sdev_id(dev), dev->lun);
	switch (cmd->cmnd[0]) {
	case SERVICE_ACTION_IN:
		if (!(aac->raw_io_interface) ||
		    !(aac->raw_io_64) ||
		    ((cmd->cmnd[1] & 0x1f) != SAI_READ_CAPACITY_16))
			break;
	case INQUIRY:
	case READ_CAPACITY:
		/* Mark associated FIB to not complete, eh handler does this */
		for (count = 0; count < (host->can_queue + AAC_NUM_MGT_FIB); ++count) {
			struct fib * fib = &aac->fibs[count];
			if (fib->hw_fib_va->header.XferState &&
			  (fib->flags & FIB_CONTEXT_FLAG) &&
			  (fib->callback_data == cmd)) {
				fib->flags |= FIB_CONTEXT_FLAG_TIMED_OUT;
				cmd->SCp.phase = AAC_OWNER_ERROR_HANDLER;
				ret = SUCCESS;
			}
		}
		break;
	case TEST_UNIT_READY:
		/* Mark associated FIB to not complete, eh handler does this */
		for (count = 0; count < (host->can_queue + AAC_NUM_MGT_FIB); ++count) {
			struct scsi_cmnd * command;
			struct fib * fib = &aac->fibs[count];
			if ((fib->hw_fib_va->header.XferState & cpu_to_le32(Async | NoResponseExpected)) &&
			  (fib->flags & FIB_CONTEXT_FLAG) &&
			  ((command = fib->callback_data)) &&
			  (command->device == cmd->device)) {
				fib->flags |= FIB_CONTEXT_FLAG_TIMED_OUT;
				command->SCp.phase = AAC_OWNER_ERROR_HANDLER;
				if (command == cmd)
					ret = SUCCESS;
			}
		}
	}
	return ret;
}

/*
 *	aac_eh_reset	- Reset command handling
 *	@scsi_cmd:	SCSI command block causing the reset
 *
 */
static int aac_eh_reset(struct scsi_cmnd* cmd)
{
	struct scsi_device * dev = cmd->device;
	struct Scsi_Host * host = dev->host;
	struct scsi_cmnd * command;
	int count;
	struct aac_dev * aac = (struct aac_dev *)host->hostdata;
	unsigned long flags;

	/* Mark the associated FIB to not complete, eh handler does this */
	for (count = 0; count < (host->can_queue + AAC_NUM_MGT_FIB); ++count) {
		struct fib * fib = &aac->fibs[count];
		if (fib->hw_fib_va->header.XferState &&
		  (fib->flags & FIB_CONTEXT_FLAG) &&
		  (fib->callback_data == cmd)) {
			fib->flags |= FIB_CONTEXT_FLAG_TIMED_OUT;
			cmd->SCp.phase = AAC_OWNER_ERROR_HANDLER;
		}
	}
	printk(KERN_ERR "%s: Host adapter reset request. SCSI hang ?\n",
					AAC_DRIVERNAME);

	if ((count = aac_check_health(aac)))
		return count;
	/*
	 * Wait for all commands to complete to this specific
	 * target (block maximum 60 seconds).
	 */
	for (count = 60; count; --count) {
		int active = aac->in_reset;

		if (active == 0)
		__shost_for_each_device(dev, host) {
			spin_lock_irqsave(&dev->list_lock, flags);
			list_for_each_entry(command, &dev->cmd_list, list) {
				if ((command != cmd) &&
				    (command->SCp.phase == AAC_OWNER_FIRMWARE)) {
					active++;
					break;
				}
			}
			spin_unlock_irqrestore(&dev->list_lock, flags);
			if (active)
				break;

		}
		/*
		 * We can exit If all the commands are complete
		 */
		if (active == 0)
			return SUCCESS;
		ssleep(1);
	}
	printk(KERN_ERR "%s: SCSI bus appears hung\n", AAC_DRIVERNAME);
	/*
	 * This adapter needs a blind reset, only do so for Adapters that
	 * support a register, instead of a commanded, reset.
	 */
	if (((aac->supplement_adapter_info.SupportedOptions2 &
	  AAC_OPTION_MU_RESET) ||
	  (aac->supplement_adapter_info.SupportedOptions2 &
	  AAC_OPTION_DOORBELL_RESET)) &&
	  aac_check_reset &&
	  ((aac_check_reset != 1) ||
	   !(aac->supplement_adapter_info.SupportedOptions2 &
	    AAC_OPTION_IGNORE_RESET)))
		aac_reset_adapter(aac, 2); /* Bypass wait for command quiesce */
	return SUCCESS; /* Cause an immediate retry of the command with a ten second delay after successful tur */
}

/**
 *	aac_cfg_open		-	open a configuration file
 *	@inode: inode being opened
 *	@file: file handle attached
 *
 *	Called when the configuration device is opened. Does the needed
 *	set up on the handle and then returns
 *
 *	Bugs: This needs extending to check a given adapter is present
 *	so we can support hot plugging, and to ref count adapters.
 */

static int aac_cfg_open(struct inode *inode, struct file *file)
{
	struct aac_dev *aac;
	unsigned minor_number = iminor(inode);
	int err = -ENODEV;

	mutex_lock(&aac_mutex);  /* BKL pushdown: nothing else protects this list */
	list_for_each_entry(aac, &aac_devices, entry) {
		if (aac->id == minor_number) {
			file->private_data = aac;
			err = 0;
			break;
		}
	}
	mutex_unlock(&aac_mutex);

	return err;
}

/**
 *	aac_cfg_ioctl		-	AAC configuration request
 *	@inode: inode of device
 *	@file: file handle
 *	@cmd: ioctl command code
 *	@arg: argument
 *
 *	Handles a configuration ioctl. Currently this involves wrapping it
 *	up and feeding it into the nasty windowsalike glue layer.
 *
 *	Bugs: Needs locking against parallel ioctls lower down
 *	Bugs: Needs to handle hot plugging
 */

static long aac_cfg_ioctl(struct file *file,
		unsigned int cmd, unsigned long arg)
{
	int ret;
	if (!capable(CAP_SYS_RAWIO))
		return -EPERM;
	mutex_lock(&aac_mutex);
	ret = aac_do_ioctl(file->private_data, cmd, (void __user *)arg);
	mutex_unlock(&aac_mutex);

	return ret;
}

#ifdef CONFIG_COMPAT
static long aac_compat_do_ioctl(struct aac_dev *dev, unsigned cmd, unsigned long arg)
{
	long ret;
	mutex_lock(&aac_mutex);
	switch (cmd) {
	case FSACTL_MINIPORT_REV_CHECK:
	case FSACTL_SENDFIB:
	case FSACTL_OPEN_GET_ADAPTER_FIB:
	case FSACTL_CLOSE_GET_ADAPTER_FIB:
	case FSACTL_SEND_RAW_SRB:
	case FSACTL_GET_PCI_INFO:
	case FSACTL_QUERY_DISK:
	case FSACTL_DELETE_DISK:
	case FSACTL_FORCE_DELETE_DISK:
	case FSACTL_GET_CONTAINERS:
	case FSACTL_SEND_LARGE_FIB:
		ret = aac_do_ioctl(dev, cmd, (void __user *)arg);
		break;

	case FSACTL_GET_NEXT_ADAPTER_FIB: {
		struct fib_ioctl __user *f;

		f = compat_alloc_user_space(sizeof(*f));
		ret = 0;
		if (clear_user(f, sizeof(*f)))
			ret = -EFAULT;
		if (copy_in_user(f, (void __user *)arg, sizeof(struct fib_ioctl) - sizeof(u32)))
			ret = -EFAULT;
		if (!ret)
			ret = aac_do_ioctl(dev, cmd, f);
		break;
	}

	default:
		ret = -ENOIOCTLCMD;
		break;
	}
	mutex_unlock(&aac_mutex);
	return ret;
}

static int aac_compat_ioctl(struct scsi_device *sdev, int cmd, void __user *arg)
{
	struct aac_dev *dev = (struct aac_dev *)sdev->host->hostdata;
	return aac_compat_do_ioctl(dev, cmd, (unsigned long)arg);
}

static long aac_compat_cfg_ioctl(struct file *file, unsigned cmd, unsigned long arg)
{
	if (!capable(CAP_SYS_RAWIO))
		return -EPERM;
	return aac_compat_do_ioctl(file->private_data, cmd, arg);
}
#endif

static ssize_t aac_show_model(struct device *device,
			      struct device_attribute *attr, char *buf)
{
	struct aac_dev *dev = (struct aac_dev*)class_to_shost(device)->hostdata;
	int len;

	if (dev->supplement_adapter_info.AdapterTypeText[0]) {
		char * cp = dev->supplement_adapter_info.AdapterTypeText;
		while (*cp && *cp != ' ')
			++cp;
		while (*cp == ' ')
			++cp;
		len = snprintf(buf, PAGE_SIZE, "%s\n", cp);
	} else
		len = snprintf(buf, PAGE_SIZE, "%s\n",
		  aac_drivers[dev->cardtype].model);
	return len;
}

static ssize_t aac_show_vendor(struct device *device,
			       struct device_attribute *attr, char *buf)
{
	struct aac_dev *dev = (struct aac_dev*)class_to_shost(device)->hostdata;
	int len;

	if (dev->supplement_adapter_info.AdapterTypeText[0]) {
		char * cp = dev->supplement_adapter_info.AdapterTypeText;
		while (*cp && *cp != ' ')
			++cp;
		len = snprintf(buf, PAGE_SIZE, "%.*s\n",
		  (int)(cp - (char *)dev->supplement_adapter_info.AdapterTypeText),
		  dev->supplement_adapter_info.AdapterTypeText);
	} else
		len = snprintf(buf, PAGE_SIZE, "%s\n",
		  aac_drivers[dev->cardtype].vname);
	return len;
}

static ssize_t aac_show_flags(struct device *cdev,
			      struct device_attribute *attr, char *buf)
{
	int len = 0;
	struct aac_dev *dev = (struct aac_dev*)class_to_shost(cdev)->hostdata;

	if (nblank(dprintk(x)))
		len = snprintf(buf, PAGE_SIZE, "dprintk\n");
#ifdef AAC_DETAILED_STATUS_INFO
	len += snprintf(buf + len, PAGE_SIZE - len,
			"AAC_DETAILED_STATUS_INFO\n");
#endif
	if (dev->raw_io_interface && dev->raw_io_64)
		len += snprintf(buf + len, PAGE_SIZE - len,
				"SAI_READ_CAPACITY_16\n");
	if (dev->jbod)
		len += snprintf(buf + len, PAGE_SIZE - len, "SUPPORTED_JBOD\n");
	if (dev->supplement_adapter_info.SupportedOptions2 &
		AAC_OPTION_POWER_MANAGEMENT)
		len += snprintf(buf + len, PAGE_SIZE - len,
				"SUPPORTED_POWER_MANAGEMENT\n");
	if (dev->msi)
		len += snprintf(buf + len, PAGE_SIZE - len, "PCI_HAS_MSI\n");
	return len;
}

static ssize_t aac_show_kernel_version(struct device *device,
				       struct device_attribute *attr,
				       char *buf)
{
	struct aac_dev *dev = (struct aac_dev*)class_to_shost(device)->hostdata;
	int len, tmp;

	tmp = le32_to_cpu(dev->adapter_info.kernelrev);
	len = snprintf(buf, PAGE_SIZE, "%d.%d-%d[%d]\n",
	  tmp >> 24, (tmp >> 16) & 0xff, tmp & 0xff,
	  le32_to_cpu(dev->adapter_info.kernelbuild));
	return len;
}

static ssize_t aac_show_monitor_version(struct device *device,
					struct device_attribute *attr,
					char *buf)
{
	struct aac_dev *dev = (struct aac_dev*)class_to_shost(device)->hostdata;
	int len, tmp;

	tmp = le32_to_cpu(dev->adapter_info.monitorrev);
	len = snprintf(buf, PAGE_SIZE, "%d.%d-%d[%d]\n",
	  tmp >> 24, (tmp >> 16) & 0xff, tmp & 0xff,
	  le32_to_cpu(dev->adapter_info.monitorbuild));
	return len;
}

static ssize_t aac_show_bios_version(struct device *device,
				     struct device_attribute *attr,
				     char *buf)
{
	struct aac_dev *dev = (struct aac_dev*)class_to_shost(device)->hostdata;
	int len, tmp;

	tmp = le32_to_cpu(dev->adapter_info.biosrev);
	len = snprintf(buf, PAGE_SIZE, "%d.%d-%d[%d]\n",
	  tmp >> 24, (tmp >> 16) & 0xff, tmp & 0xff,
	  le32_to_cpu(dev->adapter_info.biosbuild));
	return len;
}

static ssize_t aac_show_serial_number(struct device *device,
			       struct device_attribute *attr, char *buf)
{
	struct aac_dev *dev = (struct aac_dev*)class_to_shost(device)->hostdata;
	int len = 0;

	if (le32_to_cpu(dev->adapter_info.serial[0]) != 0xBAD0)
		len = snprintf(buf, 16, "%06X\n",
		  le32_to_cpu(dev->adapter_info.serial[0]));
	if (len &&
	  !memcmp(&dev->supplement_adapter_info.MfgPcbaSerialNo[
	    sizeof(dev->supplement_adapter_info.MfgPcbaSerialNo)-len],
	  buf, len-1))
		len = snprintf(buf, 16, "%.*s\n",
		  (int)sizeof(dev->supplement_adapter_info.MfgPcbaSerialNo),
		  dev->supplement_adapter_info.MfgPcbaSerialNo);

	return min(len, 16);
}

static ssize_t aac_show_max_channel(struct device *device,
				    struct device_attribute *attr, char *buf)
{
	return snprintf(buf, PAGE_SIZE, "%d\n",
	  class_to_shost(device)->max_channel);
}

static ssize_t aac_show_max_id(struct device *device,
			       struct device_attribute *attr, char *buf)
{
	return snprintf(buf, PAGE_SIZE, "%d\n",
	  class_to_shost(device)->max_id);
}

static ssize_t aac_store_reset_adapter(struct device *device,
				       struct device_attribute *attr,
				       const char *buf, size_t count)
{
	int retval = -EACCES;

	if (!capable(CAP_SYS_ADMIN))
		return retval;
	retval = aac_reset_adapter((struct aac_dev*)class_to_shost(device)->hostdata, buf[0] == '!');
	if (retval >= 0)
		retval = count;
	return retval;
}

static ssize_t aac_show_reset_adapter(struct device *device,
				      struct device_attribute *attr,
				      char *buf)
{
	struct aac_dev *dev = (struct aac_dev*)class_to_shost(device)->hostdata;
	int len, tmp;

	tmp = aac_adapter_check_health(dev);
	if ((tmp == 0) && dev->in_reset)
		tmp = -EBUSY;
	len = snprintf(buf, PAGE_SIZE, "0x%x\n", tmp);
	return len;
}

static struct device_attribute aac_model = {
	.attr = {
		.name = "model",
		.mode = S_IRUGO,
	},
	.show = aac_show_model,
};
static struct device_attribute aac_vendor = {
	.attr = {
		.name = "vendor",
		.mode = S_IRUGO,
	},
	.show = aac_show_vendor,
};
static struct device_attribute aac_flags = {
	.attr = {
		.name = "flags",
		.mode = S_IRUGO,
	},
	.show = aac_show_flags,
};
static struct device_attribute aac_kernel_version = {
	.attr = {
		.name = "hba_kernel_version",
		.mode = S_IRUGO,
	},
	.show = aac_show_kernel_version,
};
static struct device_attribute aac_monitor_version = {
	.attr = {
		.name = "hba_monitor_version",
		.mode = S_IRUGO,
	},
	.show = aac_show_monitor_version,
};
static struct device_attribute aac_bios_version = {
	.attr = {
		.name = "hba_bios_version",
		.mode = S_IRUGO,
	},
	.show = aac_show_bios_version,
};
static struct device_attribute aac_serial_number = {
	.attr = {
		.name = "serial_number",
		.mode = S_IRUGO,
	},
	.show = aac_show_serial_number,
};
static struct device_attribute aac_max_channel = {
	.attr = {
		.name = "max_channel",
		.mode = S_IRUGO,
	},
	.show = aac_show_max_channel,
};
static struct device_attribute aac_max_id = {
	.attr = {
		.name = "max_id",
		.mode = S_IRUGO,
	},
	.show = aac_show_max_id,
};
static struct device_attribute aac_reset = {
	.attr = {
		.name = "reset_host",
		.mode = S_IWUSR|S_IRUGO,
	},
	.store = aac_store_reset_adapter,
	.show = aac_show_reset_adapter,
};

static struct device_attribute *aac_attrs[] = {
	&aac_model,
	&aac_vendor,
	&aac_flags,
	&aac_kernel_version,
	&aac_monitor_version,
	&aac_bios_version,
	&aac_serial_number,
	&aac_max_channel,
	&aac_max_id,
	&aac_reset,
	NULL
};

ssize_t aac_get_serial_number(struct device *device, char *buf)
{
	return aac_show_serial_number(device, &aac_serial_number, buf);
}

static const struct file_operations aac_cfg_fops = {
	.owner		= THIS_MODULE,
	.unlocked_ioctl	= aac_cfg_ioctl,
#ifdef CONFIG_COMPAT
	.compat_ioctl   = aac_compat_cfg_ioctl,
#endif
	.open		= aac_cfg_open,
	.llseek		= noop_llseek,
};

static struct scsi_host_template aac_driver_template = {
	.module				= THIS_MODULE,
	.name				= "AAC",
	.proc_name			= AAC_DRIVERNAME,
	.info				= aac_info,
	.ioctl				= aac_ioctl,
#ifdef CONFIG_COMPAT
	.compat_ioctl			= aac_compat_ioctl,
#endif
	.queuecommand			= aac_queuecommand,
	.bios_param			= aac_biosparm,
	.shost_attrs			= aac_attrs,
	.slave_configure		= aac_slave_configure,
	.change_queue_depth		= aac_change_queue_depth,
	.sdev_attrs			= aac_dev_attrs,
	.eh_abort_handler		= aac_eh_abort,
	.eh_host_reset_handler		= aac_eh_reset,
	.can_queue			= AAC_NUM_IO_FIB,
	.this_id			= MAXIMUM_NUM_CONTAINERS,
	.sg_tablesize			= 16,
	.max_sectors			= 128,
#if (AAC_NUM_IO_FIB > 256)
	.cmd_per_lun			= 256,
#else
	.cmd_per_lun			= AAC_NUM_IO_FIB,
#endif
	.use_clustering			= ENABLE_CLUSTERING,
	.emulated			= 1,
};

static void __aac_shutdown(struct aac_dev * aac)
{
	if (aac->aif_thread) {
		int i;
		/* Clear out events first */
		for (i = 0; i < (aac->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB); i++) {
			struct fib *fib = &aac->fibs[i];
			if (!(fib->hw_fib_va->header.XferState & cpu_to_le32(NoResponseExpected | Async)) &&
			    (fib->hw_fib_va->header.XferState & cpu_to_le32(ResponseExpected)))
				up(&fib->event_wait);
		}
		kthread_stop(aac->thread);
	}
	aac_send_shutdown(aac);
	aac_adapter_disable_int(aac);
	free_irq(aac->pdev->irq, aac);
	if (aac->msi)
		pci_disable_msi(aac->pdev);
}

static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
	unsigned index = id->driver_data;
	struct Scsi_Host *shost;
	struct aac_dev *aac;
	struct list_head *insert = &aac_devices;
	int error = -ENODEV;
	int unique_id = 0;
	u64 dmamask;
	extern int aac_sync_mode;

	list_for_each_entry(aac, &aac_devices, entry) {
		if (aac->id > unique_id)
			break;
		insert = &aac->entry;
		unique_id++;
	}

	pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |
			       PCIE_LINK_STATE_CLKPM);

	error = pci_enable_device(pdev);
	if (error)
		goto out;
	error = -ENODEV;

	/*
	 * If the quirk31 bit is set, the adapter needs adapter
	 * to driver communication memory to be allocated below 2gig
	 */
	if (aac_drivers[index].quirks & AAC_QUIRK_31BIT)
		dmamask = DMA_BIT_MASK(31);
	else
		dmamask = DMA_BIT_MASK(32);

	if (pci_set_dma_mask(pdev, dmamask) ||
			pci_set_consistent_dma_mask(pdev, dmamask))
		goto out_disable_pdev;

	pci_set_master(pdev);

	shost = scsi_host_alloc(&aac_driver_template, sizeof(struct aac_dev));
	if (!shost)
		goto out_disable_pdev;

	shost->irq = pdev->irq;
	shost->unique_id = unique_id;
	shost->max_cmd_len = 16;

	aac = (struct aac_dev *)shost->hostdata;
	aac->base_start = pci_resource_start(pdev, 0);
	aac->scsi_host_ptr = shost;
	aac->pdev = pdev;
	aac->name = aac_driver_template.name;
	aac->id = shost->unique_id;
	aac->cardtype = index;
	INIT_LIST_HEAD(&aac->entry);

	aac->fibs = kzalloc(sizeof(struct fib) * (shost->can_queue + AAC_NUM_MGT_FIB), GFP_KERNEL);
	if (!aac->fibs)
		goto out_free_host;
	spin_lock_init(&aac->fib_lock);

	/*
	 *	Map in the registers from the adapter.
	 */
	aac->base_size = AAC_MIN_FOOTPRINT_SIZE;
	if ((*aac_drivers[index].init)(aac))
		goto out_unmap;

	if (aac->sync_mode) {
		if (aac_sync_mode)
			printk(KERN_INFO "%s%d: Sync. mode enforced "
				"by driver parameter. This will cause "
				"a significant performance decrease!\n",
				aac->name,
				aac->id);
		else
			printk(KERN_INFO "%s%d: Async. mode not supported "
				"by current driver, sync. mode enforced."
				"\nPlease update driver to get full performance.\n",
				aac->name,
				aac->id);
	}

	/*
	 *	Start any kernel threads needed
	 */
	aac->thread = kthread_run(aac_command_thread, aac, AAC_DRIVERNAME);
	if (IS_ERR(aac->thread)) {
		printk(KERN_ERR "aacraid: Unable to create command thread.\n");
		error = PTR_ERR(aac->thread);
		aac->thread = NULL;
		goto out_deinit;
	}

	/*
	 * If we had set a smaller DMA mask earlier, set it to 4gig
	 * now since the adapter can dma data to at least a 4gig
	 * address space.
	 */
	if (aac_drivers[index].quirks & AAC_QUIRK_31BIT)
		if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)))
			goto out_deinit;

	aac->maximum_num_channels = aac_drivers[index].channels;
	error = aac_get_adapter_info(aac);
	if (error < 0)
		goto out_deinit;

	/*
	 * Lets override negotiations and drop the maximum SG limit to 34
	 */
	if ((aac_drivers[index].quirks & AAC_QUIRK_34SG) &&
			(shost->sg_tablesize > 34)) {
		shost->sg_tablesize = 34;
		shost->max_sectors = (shost->sg_tablesize * 8) + 112;
	}

	if ((aac_drivers[index].quirks & AAC_QUIRK_17SG) &&
			(shost->sg_tablesize > 17)) {
		shost->sg_tablesize = 17;
		shost->max_sectors = (shost->sg_tablesize * 8) + 112;
	}

	error = pci_set_dma_max_seg_size(pdev,
		(aac->adapter_info.options & AAC_OPT_NEW_COMM) ?
			(shost->max_sectors << 9) : 65536);
	if (error)
		goto out_deinit;

	/*
	 * Firmware printf works only with older firmware.
	 */
	if (aac_drivers[index].quirks & AAC_QUIRK_34SG)
		aac->printf_enabled = 1;
	else
		aac->printf_enabled = 0;

	/*
	 * max channel will be the physical channels plus 1 virtual channel
	 * all containers are on the virtual channel 0 (CONTAINER_CHANNEL)
	 * physical channels are address by their actual physical number+1
	 */
	if (aac->nondasd_support || expose_physicals || aac->jbod)
		shost->max_channel = aac->maximum_num_channels;
	else
		shost->max_channel = 0;

	aac_get_config_status(aac, 0);
	aac_get_containers(aac);
	list_add(&aac->entry, insert);

	shost->max_id = aac->maximum_num_containers;
	if (shost->max_id < aac->maximum_num_physicals)
		shost->max_id = aac->maximum_num_physicals;
	if (shost->max_id < MAXIMUM_NUM_CONTAINERS)
		shost->max_id = MAXIMUM_NUM_CONTAINERS;
	else
		shost->this_id = shost->max_id;

	/*
	 * dmb - we may need to move the setting of these parms somewhere else once
	 * we get a fib that can report the actual numbers
	 */
	shost->max_lun = AAC_MAX_LUN;

	pci_set_drvdata(pdev, shost);

	error = scsi_add_host(shost, &pdev->dev);
	if (error)
		goto out_deinit;
	scsi_scan_host(shost);

	return 0;

 out_deinit:
	__aac_shutdown(aac);
 out_unmap:
	aac_fib_map_free(aac);
	if (aac->comm_addr)
		pci_free_consistent(aac->pdev, aac->comm_size, aac->comm_addr,
		  aac->comm_phys);
	kfree(aac->queues);
	aac_adapter_ioremap(aac, 0);
	kfree(aac->fibs);
	kfree(aac->fsa_dev);
 out_free_host:
	scsi_host_put(shost);
 out_disable_pdev:
	pci_disable_device(pdev);
 out:
	return error;
}

static void aac_shutdown(struct pci_dev *dev)
{
	struct Scsi_Host *shost = pci_get_drvdata(dev);
	scsi_block_requests(shost);
	__aac_shutdown((struct aac_dev *)shost->hostdata);
}

static void aac_remove_one(struct pci_dev *pdev)
{
	struct Scsi_Host *shost = pci_get_drvdata(pdev);
	struct aac_dev *aac = (struct aac_dev *)shost->hostdata;

	scsi_remove_host(shost);

	__aac_shutdown(aac);
	aac_fib_map_free(aac);
	pci_free_consistent(aac->pdev, aac->comm_size, aac->comm_addr,
			aac->comm_phys);
	kfree(aac->queues);

	aac_adapter_ioremap(aac, 0);

	kfree(aac->fibs);
	kfree(aac->fsa_dev);

	list_del(&aac->entry);
	scsi_host_put(shost);
	pci_disable_device(pdev);
	if (list_empty(&aac_devices)) {
		unregister_chrdev(aac_cfg_major, "aac");
		aac_cfg_major = -1;
	}
}

static struct pci_driver aac_pci_driver = {
	.name		= AAC_DRIVERNAME,
	.id_table	= aac_pci_tbl,
	.probe		= aac_probe_one,
	.remove		= aac_remove_one,
	.shutdown	= aac_shutdown,
};

static int __init aac_init(void)
{
	int error;

	printk(KERN_INFO "Adaptec %s driver %s\n",
	  AAC_DRIVERNAME, aac_driver_version);

	error = pci_register_driver(&aac_pci_driver);
	if (error < 0)
		return error;

	aac_cfg_major = register_chrdev( 0, "aac", &aac_cfg_fops);
	if (aac_cfg_major < 0) {
		printk(KERN_WARNING
			"aacraid: unable to register \"aac\" device.\n");
	}

	return 0;
}

static void __exit aac_exit(void)
{
	if (aac_cfg_major > -1)
		unregister_chrdev(aac_cfg_major, "aac");
	pci_unregister_driver(&aac_pci_driver);
}

module_init(aac_init);
module_exit(aac_exit);