blob: 98ccfeb3f5aafcf2306666221eccc026aa632140 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#
2# IDE ATA ATAPI Block device driver configuration
3#
Linus Torvalds1da177e2005-04-16 15:20:36 -07004
Sam Ravnborgec7748b2008-02-09 10:46:40 +01005# Select HAVE_IDE if IDE is supported
6config HAVE_IDE
Jan Beulich9ba16082008-10-15 22:01:38 -07007 bool
Sam Ravnborgec7748b2008-02-09 10:46:40 +01008
Jan Engelhardte0ff9cd2007-05-16 00:51:46 +02009menuconfig IDE
Robert Hancock73ba3232009-10-26 15:41:32 +000010 tristate "ATA/ATAPI/MFM/RLL support (DEPRECATED)"
Sam Ravnborgec7748b2008-02-09 10:46:40 +010011 depends on HAVE_IDE
Jan Engelhardte0ff9cd2007-05-16 00:51:46 +020012 depends on BLOCK
Linus Torvalds1da177e2005-04-16 15:20:36 -070013 ---help---
Robert Hancock73ba3232009-10-26 15:41:32 +000014 If you say Y here, your kernel will be able to manage ATA/(E)IDE and
15 ATAPI units. The most common cases are IDE hard drives and ATAPI
16 CD-ROM drives.
Linus Torvalds1da177e2005-04-16 15:20:36 -070017
Robert Hancock73ba3232009-10-26 15:41:32 +000018 This subsystem is currently in maintenance mode with only bug fix
19 changes applied. Users of ATA hardware are encouraged to migrate to
20 the newer ATA subsystem ("Serial ATA (prod) and Parallel ATA
21 (experimental) drivers") which is more actively maintained.
Linus Torvalds1da177e2005-04-16 15:20:36 -070022
23 To compile this driver as a module, choose M here: the
Pavel Machek4737f092009-06-05 00:44:53 +020024 module will be called ide-core.
Linus Torvalds1da177e2005-04-16 15:20:36 -070025
Randy Dunlap1c10e932008-03-07 21:53:50 +010026 For further information, please read <file:Documentation/ide/ide.txt>.
Linus Torvalds1da177e2005-04-16 15:20:36 -070027
Robert Hancock73ba3232009-10-26 15:41:32 +000028 If unsure, say N.
Linus Torvalds1da177e2005-04-16 15:20:36 -070029
30if IDE
31
Randy Dunlap1c10e932008-03-07 21:53:50 +010032comment "Please see Documentation/ide/ide.txt for help/info on IDE drives"
Linus Torvalds1da177e2005-04-16 15:20:36 -070033
Bartlomiej Zolnierkiewicz7eeaaaa2009-03-24 23:22:46 +010034config IDE_XFER_MODE
35 bool
36
Bartlomiej Zolnierkiewiczf06ab342008-07-16 20:33:37 +020037config IDE_TIMINGS
38 bool
Bartlomiej Zolnierkiewicz7eeaaaa2009-03-24 23:22:46 +010039 select IDE_XFER_MODE
Bartlomiej Zolnierkiewiczf06ab342008-07-16 20:33:37 +020040
Bartlomiej Zolnierkiewicz594c16d2008-07-15 21:21:58 +020041config IDE_ATAPI
42 bool
43
Bartlomiej Zolnierkiewicz7f92b112008-12-29 20:27:37 +010044config IDE_LEGACY
45 bool
46
Linus Torvalds1da177e2005-04-16 15:20:36 -070047config BLK_DEV_IDE_SATA
48 bool "Support for SATA (deprecated; conflicts with libata SATA driver)"
49 default n
50 ---help---
51 There are two drivers for Serial ATA controllers.
52
Patrick Ringlb43c5f32007-03-26 23:03:19 +020053 The main driver, "libata", uses the SCSI subsystem
54 and supports most modern SATA controllers. In order to use it
55 you may take a look at "Serial ATA (prod) and Parallel ATA
56 (experimental) drivers".
Linus Torvalds1da177e2005-04-16 15:20:36 -070057
58 The IDE driver (which you are currently configuring) supports
59 a few first-generation SATA controllers.
60
61 In order to eliminate conflicts between the two subsystems,
62 this config option enables the IDE driver's SATA support.
63 Normally this is disabled, as it is preferred that libata
64 supports SATA controllers, and this (IDE) driver supports
65 PATA controllers.
66
67 If unsure, say N.
68
Bartlomiej Zolnierkiewicz806f80a2008-10-17 18:09:14 +020069config IDE_GD
70 tristate "generic ATA/ATAPI disk support"
71 default y
72 help
73 Support for ATA/ATAPI disks (including ATAPI floppy drives).
Linus Torvalds1da177e2005-04-16 15:20:36 -070074
Bartlomiej Zolnierkiewicz806f80a2008-10-17 18:09:14 +020075 To compile this driver as a module, choose M here.
76 The module will be called ide-gd_mod.
Linus Torvalds1da177e2005-04-16 15:20:36 -070077
78 If unsure, say Y.
79
Bartlomiej Zolnierkiewicz806f80a2008-10-17 18:09:14 +020080config IDE_GD_ATA
81 bool "ATA disk support"
82 depends on IDE_GD
83 default y
84 help
85 This will include support for ATA hard disks.
86
87 If unsure, say Y.
88
89config IDE_GD_ATAPI
90 bool "ATAPI floppy support"
91 depends on IDE_GD
92 select IDE_ATAPI
93 help
94 This will include support for ATAPI floppy drives
95 (i.e. Iomega ZIP or MKE LS-120).
96
97 For information about jumper settings and the question
98 of when a ZIP drive uses a partition table, see
99 <http://www.win.tue.nl/~aeb/linux/zip/zip-1.html>.
100
101 If unsure, say N.
102
Linus Torvalds1da177e2005-04-16 15:20:36 -0700103config BLK_DEV_IDECS
104 tristate "PCMCIA IDE support"
105 depends on PCMCIA
106 help
Andreas Mohr3b6ce242006-02-03 03:04:54 -0800107 Support for Compact Flash cards, outboard IDE disks, tape drives,
108 and CD-ROM drives connected through a PCMCIA card.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700109
Mark Lord78281c52007-02-07 18:19:32 +0100110config BLK_DEV_DELKIN
111 tristate "Cardbus IDE support (Delkin/ASKA/Workbit)"
112 depends on CARDBUS && PCI
113 help
114 Support for Delkin, ASKA, and Workbit Cardbus CompactFlash
115 Adapters. This may also work for similar SD and XD adapters.
116
Linus Torvalds1da177e2005-04-16 15:20:36 -0700117config BLK_DEV_IDECD
118 tristate "Include IDE/ATAPI CDROM support"
Borislav Petkov392de1d2009-01-02 16:12:52 +0100119 select IDE_ATAPI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700120 ---help---
121 If you have a CD-ROM drive using the ATAPI protocol, say Y. ATAPI is
122 a newer protocol used by IDE CD-ROM and TAPE drives, similar to the
123 SCSI protocol. Most new CD-ROM drives use ATAPI, including the
124 NEC-260, Mitsumi FX400, Sony 55E, and just about all non-SCSI
125 double(2X) or better speed drives.
126
127 If you say Y here, the CD-ROM drive will be identified at boot time
128 along with other IDE devices, as "hdb" or "hdc", or something
129 similar (check the boot messages with dmesg). If this is your only
130 CD-ROM drive, you can say N to all other CD-ROM options, but be sure
131 to say Y or M to "ISO 9660 CD-ROM file system support".
132
Linus Torvalds1da177e2005-04-16 15:20:36 -0700133 To compile this driver as a module, choose M here: the
134 module will be called ide-cd.
135
Bartlomiej Zolnierkiewicz972560f2008-02-01 23:09:23 +0100136config BLK_DEV_IDECD_VERBOSE_ERRORS
137 bool "Verbose error logging for IDE/ATAPI CDROM driver" if EMBEDDED
138 depends on BLK_DEV_IDECD
139 default y
140 help
141 Turn this on to have the driver print out the meanings of the
142 ATAPI error codes. This will use up additional 8kB of kernel-space
143 memory, though.
144
Linus Torvalds1da177e2005-04-16 15:20:36 -0700145config BLK_DEV_IDETAPE
Borislav Petkov4278c2d2008-02-02 19:56:50 +0100146 tristate "Include IDE/ATAPI TAPE support"
Bartlomiej Zolnierkiewicz594c16d2008-07-15 21:21:58 +0200147 select IDE_ATAPI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700148 help
149 If you have an IDE tape drive using the ATAPI protocol, say Y.
150 ATAPI is a newer protocol used by IDE tape and CD-ROM drives,
151 similar to the SCSI protocol. If you have an SCSI tape drive
152 however, you can say N here.
153
154 You should also say Y if you have an OnStream DI-30 tape drive; this
155 will not work with the SCSI protocol, until there is support for the
156 SC-30 and SC-50 versions.
157
158 If you say Y here, the tape drive will be identified at boot time
159 along with other IDE devices, as "hdb" or "hdc", or something
160 similar, and will be mapped to a character device such as "ht0"
161 (check the boot messages with dmesg). Be sure to consult the
Randy Dunlap1c10e932008-03-07 21:53:50 +0100162 <file:drivers/ide/ide-tape.c> and <file:Documentation/ide/ide.txt>
163 files for usage information.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700164
165 To compile this driver as a module, choose M here: the
166 module will be called ide-tape.
167
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100168config BLK_DEV_IDEACPI
169 bool "IDE ACPI support"
170 depends on ACPI
171 ---help---
172 Implement ACPI support for generic IDE devices. On modern
173 machines ACPI support is required to properly handle ACPI S3 states.
174
Linus Torvalds1da177e2005-04-16 15:20:36 -0700175config IDE_TASK_IOCTL
176 bool "IDE Taskfile Access"
177 help
178 This is a direct raw access to the media. It is a complex but
179 elegant solution to test and validate the domain of the hardware and
Andreas Mohr3b6ce242006-02-03 03:04:54 -0800180 perform below the driver data recovery if needed. This is the most
Linus Torvalds1da177e2005-04-16 15:20:36 -0700181 basic form of media-forensics.
182
183 If you are unsure, say N here.
184
Bartlomiej Zolnierkiewiczecfd80e2007-05-10 00:01:09 +0200185config IDE_PROC_FS
186 bool "legacy /proc/ide/ support"
187 depends on IDE && PROC_FS
188 default y
189 help
190 This option enables support for the various files in
191 /proc/ide. In Linux 2.6 this has been superseded by
192 files in sysfs but many legacy applications rely on this.
193
194 If unsure say Y.
195
Linus Torvalds1da177e2005-04-16 15:20:36 -0700196comment "IDE chipset support/bugfixes"
197
198config IDE_GENERIC
199 tristate "generic/default IDE chipset support"
Bartlomiej Zolnierkiewicz44654612009-03-31 20:15:24 +0200200 depends on ALPHA || X86 || IA64 || M32R || MIPS || ARCH_RPC || ARCH_SHARK
201 default ARM && (ARCH_RPC || ARCH_SHARK)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700202 help
Tejun Heo278ecfb2008-09-27 19:32:17 +0200203 This is the generic IDE driver. This driver attaches to the
204 fixed legacy ports (e.g. on PCs 0x1f0/0x170, 0x1e8/0x168 and
205 so on). Please note that if this driver is built into the
206 kernel or loaded before other ATA (IDE or libata) drivers
207 and the controller is located at legacy ports, this driver
208 may grab those ports and thus can prevent the controller
209 specific driver from attaching.
210
211 Also, currently, IDE generic doesn't allow IRQ sharing
212 meaning that the IRQs it grabs won't be available to other
213 controllers sharing those IRQs which usually makes drivers
214 for those controllers fail. Generally, it's not a good idea
215 to load IDE generic driver on modern systems.
216
Tejun Heo82a0e702007-08-20 22:42:53 +0200217 If unsure, say N.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700218
Anton Vorontsov8cb1f562007-10-11 23:53:58 +0200219config BLK_DEV_PLATFORM
220 tristate "Platform driver for IDE interfaces"
221 help
222 This is the platform IDE driver, used mostly for Memory Mapped
223 IDE devices, like Compact Flashes running in True IDE mode.
224
225 If unsure, say N.
226
Linus Torvalds1da177e2005-04-16 15:20:36 -0700227config BLK_DEV_CMD640
Bartlomiej Zolnierkiewiczade2daf2008-01-26 20:13:07 +0100228 tristate "CMD640 chipset bugfix/support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700229 depends on X86
Bartlomiej Zolnierkiewicz17b500d2008-07-16 20:33:38 +0200230 select IDE_TIMINGS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700231 ---help---
232 The CMD-Technologies CMD640 IDE chip is used on many common 486 and
233 Pentium motherboards, usually in combination with a "Neptune" or
234 "SiS" chipset. Unfortunately, it has a number of rather nasty
235 design flaws that can cause severe data corruption under many common
236 conditions. Say Y here to include code which tries to automatically
237 detect and correct the problems under Linux. This option also
238 enables access to the secondary IDE ports in some CMD640 based
239 systems.
240
241 This driver will work automatically in PCI based systems (most new
242 systems have PCI slots). But if your system uses VESA local bus
243 (VLB) instead of PCI, you must also supply a kernel boot parameter
Bartlomiej Zolnierkiewicz64afc312008-05-14 23:06:16 +0200244 to enable the CMD640 bugfix/support: "cmd640.probe_vlb". (Try "man
Linus Torvalds1da177e2005-04-16 15:20:36 -0700245 bootparam" or see the documentation of your boot loader about how to
246 pass options to the kernel.)
247
248 The CMD640 chip is also used on add-in cards by Acculogic, and on
249 the "CSA-6400E PCI to IDE controller" that some people have. For
Randy Dunlap1c10e932008-03-07 21:53:50 +0100250 details, read <file:Documentation/ide/ide.txt>.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700251
252config BLK_DEV_CMD640_ENHANCED
253 bool "CMD640 enhanced support"
254 depends on BLK_DEV_CMD640
255 help
256 This option includes support for setting/autotuning PIO modes and
257 prefetch on CMD640 IDE interfaces. For details, read
Randy Dunlap1c10e932008-03-07 21:53:50 +0100258 <file:Documentation/ide/ide.txt>. If you have a CMD640 IDE interface
Linus Torvalds1da177e2005-04-16 15:20:36 -0700259 and your BIOS does not already do this for you, then say Y here.
260 Otherwise say N.
261
262config BLK_DEV_IDEPNP
Bartlomiej Zolnierkiewiczade2daf2008-01-26 20:13:07 +0100263 tristate "PNP EIDE support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700264 depends on PNP
265 help
266 If you have a PnP (Plug and Play) compatible EIDE card and
267 would like the kernel to automatically detect and activate
268 it, say Y here.
269
Sergei Shtylyov8e882ba2008-02-11 00:32:14 +0100270config BLK_DEV_IDEDMA_SFF
271 bool
272
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200273if PCI
274
275comment "PCI IDE chipsets support"
276
Linus Torvalds1da177e2005-04-16 15:20:36 -0700277config BLK_DEV_IDEPCI
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200278 bool
Linus Torvalds1da177e2005-04-16 15:20:36 -0700279
Bartlomiej Zolnierkiewicz6d208b32007-05-10 00:01:11 +0200280config IDEPCI_PCIBUS_ORDER
Bartlomiej Zolnierkiewiczce71ed92008-01-26 20:13:09 +0100281 bool "Probe IDE PCI devices in the PCI bus order (DEPRECATED)"
Bartlomiej Zolnierkiewicz452a8ed2008-10-13 21:39:33 +0200282 depends on IDE=y && BLK_DEV_IDEPCI
Bartlomiej Zolnierkiewiczce71ed92008-01-26 20:13:09 +0100283 default y
284 help
285 Probe IDE PCI devices in the order in which they appear on the
286 PCI bus (i.e. 00:1f.1 PCI device before 02:01.0 PCI device)
287 instead of the order in which IDE PCI host drivers are loaded.
288
289 Please note that this method of assuring stable naming of
290 IDE devices is unreliable and use other means for achieving
291 it (i.e. udev).
292
293 If in doubt, say N.
Bartlomiej Zolnierkiewicz6d208b32007-05-10 00:01:11 +0200294
Bartlomiej Zolnierkiewiczf7d7f3f2007-11-05 21:42:26 +0100295# TODO: split it on per host driver config options (or module parameters)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700296config BLK_DEV_OFFBOARD
Bartlomiej Zolnierkiewicz46255d42007-12-12 23:31:57 +0100297 bool "Boot off-board chipsets first support (DEPRECATED)"
Bartlomiej Zolnierkiewicz41d1a3d2008-10-17 18:09:16 +0200298 depends on BLK_DEV_IDEPCI && (BLK_DEV_AEC62XX || BLK_DEV_GENERIC || BLK_DEV_HPT366 || BLK_DEV_PDC202XX_NEW || BLK_DEV_PDC202XX_OLD || BLK_DEV_TC86C001)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700299 help
300 Normally, IDE controllers built into the motherboard (on-board
301 controllers) are assigned to ide0 and ide1 while those on add-in PCI
302 cards (off-board controllers) are relegated to ide2 and ide3.
303 Answering Y here will allow you to reverse the situation, with
304 off-board controllers on ide0/1 and on-board controllers on ide2/3.
305 This can improve the usability of some boot managers such as lilo
306 when booting from a drive on an off-board controller.
307
Linus Torvalds1da177e2005-04-16 15:20:36 -0700308 Note that, if you do this, the order of the hd* devices will be
309 rearranged which may require modification of fstab and other files.
310
Bartlomiej Zolnierkiewicz46255d42007-12-12 23:31:57 +0100311 Please also note that this method of assuring stable naming of
312 IDE devices is unreliable and use other means for achieving it
313 (i.e. udev).
314
Linus Torvalds1da177e2005-04-16 15:20:36 -0700315 If in doubt, say N.
316
317config BLK_DEV_GENERIC
318 tristate "Generic PCI IDE Chipset Support"
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200319 select BLK_DEV_IDEPCI
John Daikeredd023d2007-02-17 19:52:10 +0100320 help
321 This option provides generic support for various PCI IDE Chipsets
322 which otherwise might not be supported.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700323
324config BLK_DEV_OPTI621
325 tristate "OPTi 82C621 chipset enhanced support (EXPERIMENTAL)"
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200326 depends on EXPERIMENTAL
327 select BLK_DEV_IDEPCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700328 help
329 This is a driver for the OPTi 82C621 EIDE controller.
330 Please read the comments at the top of <file:drivers/ide/pci/opti621.c>.
331
332config BLK_DEV_RZ1000
333 tristate "RZ1000 chipset bugfix/support"
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200334 depends on X86
335 select BLK_DEV_IDEPCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700336 help
337 The PC-Technologies RZ1000 IDE chip is used on many common 486 and
338 Pentium motherboards, usually along with the "Neptune" chipset.
339 Unfortunately, it has a rather nasty design flaw that can cause
340 severe data corruption under many conditions. Say Y here to include
341 code which automatically detects and corrects the problem under
342 Linux. This may slow disk throughput by a few percent, but at least
343 things will operate 100% reliably.
344
Linus Torvalds1da177e2005-04-16 15:20:36 -0700345config BLK_DEV_IDEDMA_PCI
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200346 bool
347 select BLK_DEV_IDEPCI
Sergei Shtylyov8e882ba2008-02-11 00:32:14 +0100348 select BLK_DEV_IDEDMA_SFF
Linus Torvalds1da177e2005-04-16 15:20:36 -0700349
Linus Torvalds1da177e2005-04-16 15:20:36 -0700350config BLK_DEV_AEC62XX
351 tristate "AEC62XX chipset support"
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200352 select BLK_DEV_IDEDMA_PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700353 help
354 This driver adds explicit support for Acard AEC62xx (Artop ATP8xx)
355 IDE controllers. This allows the kernel to change PIO, DMA and UDMA
356 speeds and to configure the chip to optimum performance.
357
358config BLK_DEV_ALI15X3
359 tristate "ALI M15x3 chipset support"
Bartlomiej Zolnierkiewicz288911a2008-07-16 20:33:37 +0200360 select IDE_TIMINGS
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200361 select BLK_DEV_IDEDMA_PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700362 help
363 This driver ensures (U)DMA support for ALI 1533, 1543 and 1543C
364 onboard chipsets. It also tests for Simplex mode and enables
365 normal dual channel support.
366
Bartlomiej Zolnierkiewicz64afc312008-05-14 23:06:16 +0200367 Please read the comments at the top of
Linus Torvalds1da177e2005-04-16 15:20:36 -0700368 <file:drivers/ide/pci/alim15x3.c>.
369
370 If unsure, say N.
371
Linus Torvalds1da177e2005-04-16 15:20:36 -0700372config BLK_DEV_AMD74XX
373 tristate "AMD and nVidia IDE support"
Andrew Morton91302012007-11-27 21:35:56 +0100374 depends on !ARM
Bartlomiej Zolnierkiewiczf06ab342008-07-16 20:33:37 +0200375 select IDE_TIMINGS
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200376 select BLK_DEV_IDEDMA_PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700377 help
378 This driver adds explicit support for AMD-7xx and AMD-8111 chips
379 and also for the nVidia nForce chip. This allows the kernel to
380 change PIO, DMA and UDMA speeds and to configure the chip to
381 optimum performance.
382
383config BLK_DEV_ATIIXP
384 tristate "ATI IXP chipset IDE support"
385 depends on X86
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200386 select BLK_DEV_IDEDMA_PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700387 help
388 This driver adds explicit support for ATI IXP chipset.
389 This allows the kernel to change PIO, DMA and UDMA speeds
390 and to configure the chip to optimum performance.
391
392 Say Y here if you have an ATI IXP chipset IDE controller.
393
394config BLK_DEV_CMD64X
395 tristate "CMD64{3|6|8|9} chipset support"
Bartlomiej Zolnierkiewicz86a0e122008-07-16 20:33:38 +0200396 select IDE_TIMINGS
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200397 select BLK_DEV_IDEDMA_PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700398 help
399 Say Y here if you have an IDE controller which uses any of these
400 chipsets: CMD643, CMD646, or CMD648.
401
402config BLK_DEV_TRIFLEX
403 tristate "Compaq Triflex IDE support"
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200404 select BLK_DEV_IDEDMA_PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700405 help
406 Say Y here if you have a Compaq Triflex IDE controller, such
407 as those commonly found on Compaq Pentium-Pro systems
408
409config BLK_DEV_CY82C693
410 tristate "CY82C693 chipset support"
Bartlomiej Zolnierkiewiczcbf3d262008-07-23 19:55:54 +0200411 depends on ALPHA
Bartlomiej Zolnierkiewicz713a5902008-07-16 20:33:38 +0200412 select IDE_TIMINGS
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200413 select BLK_DEV_IDEDMA_PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700414 help
415 This driver adds detection and support for the CY82C693 chipset
416 used on Digital's PC-Alpha 164SX boards.
417
Linus Torvalds1da177e2005-04-16 15:20:36 -0700418config BLK_DEV_CS5520
419 tristate "Cyrix CS5510/20 MediaGX chipset support (VERY EXPERIMENTAL)"
420 depends on EXPERIMENTAL
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200421 select BLK_DEV_IDEDMA_PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700422 help
Andreas Mohr3b6ce242006-02-03 03:04:54 -0800423 Include support for PIO tuning and virtual DMA on the Cyrix MediaGX
Linus Torvalds1da177e2005-04-16 15:20:36 -0700424 5510/5520 chipset. This will automatically be detected and
425 configured if found.
426
427 It is safe to say Y to this question.
428
429config BLK_DEV_CS5530
430 tristate "Cyrix/National Semiconductor CS5530 MediaGX chipset support"
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200431 select BLK_DEV_IDEDMA_PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700432 help
433 Include support for UDMA on the Cyrix MediaGX 5530 chipset. This
434 will automatically be detected and configured if found.
435
436 It is safe to say Y to this question.
437
Jaya Kumarf5b2d8b2005-11-09 23:58:16 +0100438config BLK_DEV_CS5535
439 tristate "AMD CS5535 chipset support"
440 depends on X86 && !X86_64
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200441 select BLK_DEV_IDEDMA_PCI
Jaya Kumarf5b2d8b2005-11-09 23:58:16 +0100442 help
443 Include support for UDMA on the NSC/AMD CS5535 companion chipset.
444 This will automatically be detected and configured if found.
445
446 It is safe to say Y to this question.
447
Bartlomiej Zolnierkiewicza77dcc42009-02-02 20:12:23 +0100448config BLK_DEV_CS5536
449 tristate "CS5536 chipset support"
450 depends on X86_32
451 select BLK_DEV_IDEDMA_PCI
452 help
453 This option enables support for the AMD CS5536
454 companion chip used with the Geode LX processor family.
455
456 If unsure, say N.
457
Linus Torvalds1da177e2005-04-16 15:20:36 -0700458config BLK_DEV_HPT366
459 tristate "HPT36X/37X chipset support"
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200460 select BLK_DEV_IDEDMA_PCI
461 help
Linus Torvalds1da177e2005-04-16 15:20:36 -0700462 HPT366 is an Ultra DMA chipset for ATA-66.
463 HPT368 is an Ultra DMA chipset for ATA-66 RAID Based.
464 HPT370 is an Ultra DMA chipset for ATA-100.
465 HPT372 is an Ultra DMA chipset for ATA-100.
466 HPT374 is an Ultra DMA chipset for ATA-100.
467
468 This driver adds up to 4 more EIDE devices sharing a single
469 interrupt.
470
471 The HPT366 chipset in its current form is bootable. One solution
472 for this problem are special LILO commands for redirecting the
473 reference to device 0x80. The other solution is to say Y to "Boot
474 off-board chipsets first support" (CONFIG_BLK_DEV_OFFBOARD) unless
475 your mother board has the chipset natively mounted. Regardless one
Greg Kroah-Hartmana594eeb2008-04-18 00:46:20 +0200476 should use the fore mentioned option and call at LILO.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700477
478 This driver requires dynamic tuning of the chipset during the
479 ide-probe at boot. It is reported to support DVD II drives, by the
480 manufacturer.
481
Alan Coxbbb3bbd2006-10-03 01:14:12 -0700482config BLK_DEV_JMICRON
483 tristate "JMicron JMB36x support"
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200484 select BLK_DEV_IDEDMA_PCI
Alan Coxbbb3bbd2006-10-03 01:14:12 -0700485 help
486 Basic support for the JMicron ATA controllers. For full support
487 use the libata drivers.
488
Linus Torvalds1da177e2005-04-16 15:20:36 -0700489config BLK_DEV_SC1200
490 tristate "National SCx200 chipset support"
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200491 select BLK_DEV_IDEDMA_PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700492 help
Frans Pope665d502008-02-01 23:09:16 +0100493 This driver adds support for the on-board IDE controller on the
494 National SCx200 series of embedded x86 "Geode" systems.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700495
496config BLK_DEV_PIIX
Bartlomiej Zolnierkiewicz64afc312008-05-14 23:06:16 +0200497 tristate "Intel PIIX/ICH chipsets support"
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200498 select BLK_DEV_IDEDMA_PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700499 help
Bartlomiej Zolnierkiewicz64afc312008-05-14 23:06:16 +0200500 This driver adds explicit support for Intel PIIX and ICH chips.
501 This allows the kernel to change PIO, DMA and UDMA speeds and to
502 configure the chip to optimum performance.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700503
Shane McDonald391ad192009-01-06 17:21:01 +0100504config BLK_DEV_IT8172
505 tristate "IT8172 IDE support"
506 select BLK_DEV_IDEDMA_PCI
507 help
508 This driver adds support for the IDE controller on the
509 IT8172 System Controller.
510
Jack Lee9c6712c2007-02-07 18:19:09 +0100511config BLK_DEV_IT8213
512 tristate "IT8213 IDE support"
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200513 select BLK_DEV_IDEDMA_PCI
Jack Lee9c6712c2007-02-07 18:19:09 +0100514 help
515 This driver adds support for the ITE 8213 IDE controller.
516
Alan Coxda9091e2005-06-27 15:24:30 -0700517config BLK_DEV_IT821X
518 tristate "IT821X IDE support"
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200519 select BLK_DEV_IDEDMA_PCI
Alan Coxda9091e2005-06-27 15:24:30 -0700520 help
521 This driver adds support for the ITE 8211 IDE controller and the
522 IT 8212 IDE RAID controller in both RAID and pass-through mode.
523
Linus Torvalds1da177e2005-04-16 15:20:36 -0700524config BLK_DEV_NS87415
525 tristate "NS87415 chipset support"
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200526 select BLK_DEV_IDEDMA_PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700527 help
528 This driver adds detection and support for the NS87415 chip
Matthew Wilcox41df8942005-11-18 16:18:40 -0500529 (used mainly on SPARC64 and PA-RISC machines).
Linus Torvalds1da177e2005-04-16 15:20:36 -0700530
531 Please read the comments at the top of <file:drivers/ide/pci/ns87415.c>.
532
533config BLK_DEV_PDC202XX_OLD
534 tristate "PROMISE PDC202{46|62|65|67} support"
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200535 select BLK_DEV_IDEDMA_PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700536 help
537 Promise Ultra33 or PDC20246
538 Promise Ultra66 or PDC20262
539 Promise Ultra100 or PDC20265/PDC20267/PDC20268
540
541 This driver adds up to 4 more EIDE devices sharing a single
542 interrupt. This add-on card is a bootable PCI UDMA controller. Since
543 multiple cards can be installed and there are BIOS ROM problems that
544 happen if the BIOS revisions of all installed cards (three-max) do
545 not match, the driver attempts to do dynamic tuning of the chipset
546 at boot-time for max-speed. Ultra33 BIOS 1.25 or newer is required
Bartlomiej Zolnierkiewicz64afc312008-05-14 23:06:16 +0200547 for more than one card.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700548
549 Please read the comments at the top of
550 <file:drivers/ide/pci/pdc202xx_old.c>.
551
552 If unsure, say N.
553
Linus Torvalds1da177e2005-04-16 15:20:36 -0700554config BLK_DEV_PDC202XX_NEW
555 tristate "PROMISE PDC202{68|69|70|71|75|76|77} support"
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200556 select BLK_DEV_IDEDMA_PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700557
Linus Torvalds1da177e2005-04-16 15:20:36 -0700558config BLK_DEV_SVWKS
559 tristate "ServerWorks OSB4/CSB5/CSB6 chipsets support"
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200560 select BLK_DEV_IDEDMA_PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700561 help
562 This driver adds PIO/(U)DMA support for the ServerWorks OSB4/CSB5
563 chipsets.
564
565config BLK_DEV_SGIIOC4
Brent Casavante5d310b2005-06-21 17:16:01 -0700566 tristate "Silicon Graphics IOC4 chipset ATA/ATAPI support"
567 depends on (IA64_SGI_SN2 || IA64_GENERIC) && SGI_IOC4
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200568 select BLK_DEV_IDEDMA_PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700569 help
570 This driver adds PIO & MultiMode DMA-2 support for the SGI IOC4
571 chipset, which has one channel and can support two devices.
572 Please say Y here if you have an Altix System from SGI.
573
574config BLK_DEV_SIIMAGE
575 tristate "Silicon Image chipset support"
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200576 select BLK_DEV_IDEDMA_PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700577 help
578 This driver adds PIO/(U)DMA support for the SI CMD680 and SII
579 3112 (Serial ATA) chips.
580
581config BLK_DEV_SIS5513
582 tristate "SiS5513 chipset support"
583 depends on X86
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200584 select BLK_DEV_IDEDMA_PCI
585 help
Linus Torvalds1da177e2005-04-16 15:20:36 -0700586 This driver ensures (U)DMA support for SIS5513 chipset family based
587 mainboards.
588
589 The following chipsets are supported:
590 ATA16: SiS5511, SiS5513
591 ATA33: SiS5591, SiS5597, SiS5598, SiS5600
592 ATA66: SiS530, SiS540, SiS620, SiS630, SiS640
593 ATA100: SiS635, SiS645, SiS650, SiS730, SiS735, SiS740,
594 SiS745, SiS750
595
Linus Torvalds1da177e2005-04-16 15:20:36 -0700596 Please read the comments at the top of <file:drivers/ide/pci/sis5513.c>.
597
Olaf Hering9468f682006-12-06 20:39:55 -0800598config BLK_DEV_SL82C105
599 tristate "Winbond SL82c105 support"
600 depends on (PPC || ARM)
Bartlomiej Zolnierkiewicz3f847572008-07-16 20:33:38 +0200601 select IDE_TIMINGS
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200602 select BLK_DEV_IDEDMA_PCI
Olaf Hering9468f682006-12-06 20:39:55 -0800603 help
604 If you have a Winbond SL82c105 IDE controller, say Y here to enable
605 special configuration for this chip. This is common on various CHRP
606 motherboards, but could be used elsewhere. If in doubt, say Y.
607
Linus Torvalds1da177e2005-04-16 15:20:36 -0700608config BLK_DEV_SLC90E66
609 tristate "SLC90E66 chipset support"
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200610 select BLK_DEV_IDEDMA_PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700611 help
Andreas Mohr3b6ce242006-02-03 03:04:54 -0800612 This driver ensures (U)DMA support for Victory66 SouthBridges for
Linus Torvalds1da177e2005-04-16 15:20:36 -0700613 SMsC with Intel NorthBridges. This is an Ultra66 based chipset.
614 The nice thing about it is that you can mix Ultra/DMA/PIO devices
615 and it will handle timing cycles. Since this is an improved
616 look-a-like to the PIIX4 it should be a nice addition.
617
Linus Torvalds1da177e2005-04-16 15:20:36 -0700618 Please read the comments at the top of
619 <file:drivers/ide/pci/slc90e66.c>.
620
621config BLK_DEV_TRM290
622 tristate "Tekram TRM290 chipset support"
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200623 select BLK_DEV_IDEDMA_PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700624 help
625 This driver adds support for bus master DMA transfers
626 using the Tekram TRM290 PCI IDE chip. Volunteers are
627 needed for further tweaking and development.
628 Please read the comments at the top of <file:drivers/ide/pci/trm290.c>.
629
630config BLK_DEV_VIA82CXXX
631 tristate "VIA82CXXX chipset support"
Bartlomiej Zolnierkiewiczf06ab342008-07-16 20:33:37 +0200632 select IDE_TIMINGS
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200633 select BLK_DEV_IDEDMA_PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700634 help
635 This driver adds explicit support for VIA BusMastering IDE chips.
636 This allows the kernel to change PIO, DMA and UDMA speeds and to
637 configure the chip to optimum performance.
638
Sergei Shtylyov33dced22007-02-07 18:18:45 +0100639config BLK_DEV_TC86C001
640 tristate "Toshiba TC86C001 support"
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200641 select BLK_DEV_IDEDMA_PCI
Sergei Shtylyov33dced22007-02-07 18:18:45 +0100642 help
643 This driver adds support for Toshiba TC86C001 GOKU-S chip.
644
Kou Ishizakia1067db2007-03-17 21:57:25 +0100645config BLK_DEV_CELLEB
646 tristate "Toshiba's Cell Reference Set IDE support"
647 depends on PPC_CELLEB
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200648 select BLK_DEV_IDEDMA_PCI
Kou Ishizakia1067db2007-03-17 21:57:25 +0100649 help
Frans Pope665d502008-02-01 23:09:16 +0100650 This driver provides support for the on-board IDE controller on
Kou Ishizakia1067db2007-03-17 21:57:25 +0100651 Toshiba Cell Reference Board.
652 If unsure, say Y.
653
Linus Torvalds1da177e2005-04-16 15:20:36 -0700654endif
655
Bartlomiej Zolnierkiewicz53846572008-12-08 17:52:05 +0100656# TODO: BLK_DEV_IDEDMA_PCI -> BLK_DEV_IDEDMA_SFF
Linus Torvalds1da177e2005-04-16 15:20:36 -0700657config BLK_DEV_IDE_PMAC
Frans Pope665d502008-02-01 23:09:16 +0100658 tristate "PowerMac on-board IDE support"
Gilles Espinassed80c5922009-03-31 20:15:34 +0200659 depends on PPC_PMAC
Bartlomiej Zolnierkiewiczf06ab342008-07-16 20:33:37 +0200660 select IDE_TIMINGS
Bartlomiej Zolnierkiewicz53846572008-12-08 17:52:05 +0100661 select BLK_DEV_IDEDMA_PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700662 help
Frans Pope665d502008-02-01 23:09:16 +0100663 This driver provides support for the on-board IDE controller on
Linus Torvalds1da177e2005-04-16 15:20:36 -0700664 most of the recent Apple Power Macintoshes and PowerBooks.
665 If unsure, say Y.
666
667config BLK_DEV_IDE_PMAC_ATA100FIRST
Frans Pope665d502008-02-01 23:09:16 +0100668 bool "Probe on-board ATA/100 (Kauai) first"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700669 depends on BLK_DEV_IDE_PMAC
670 help
671 This option will cause the ATA/100 controller found in UniNorth2
672 based machines (Windtunnel PowerMac, Aluminium PowerBooks, ...)
673 to be probed before the ATA/66 and ATA/33 controllers. Without
674 these, those machine used to have the hard disk on hdc and the
675 CD-ROM on hda. This option changes this to more natural hda for
676 hard disk and hdc for CD-ROM.
677
Pete Popov26a940e2005-09-15 08:03:12 +0000678config BLK_DEV_IDE_AU1XXX
679 bool "IDE for AMD Alchemy Au1200"
680 depends on SOC_AU1200
Bartlomiej Zolnierkiewicz7eeaaaa2009-03-24 23:22:46 +0100681 select IDE_XFER_MODE
Pete Popov26a940e2005-09-15 08:03:12 +0000682choice
683 prompt "IDE Mode for AMD Alchemy Au1200"
684 default CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA
685 depends on SOC_AU1200 && BLK_DEV_IDE_AU1XXX
686
687config BLK_DEV_IDE_AU1XXX_PIO_DBDMA
688 bool "PIO+DbDMA IDE for AMD Alchemy Au1200"
689
690config BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
691 bool "MDMA2+DbDMA IDE for AMD Alchemy Au1200"
692 depends on SOC_AU1200 && BLK_DEV_IDE_AU1XXX
693endchoice
694
Atsushi Nemoto28502842008-10-23 23:22:08 +0200695config BLK_DEV_IDE_TX4938
696 tristate "TX4938 internal IDE support"
697 depends on SOC_TX4938
698 select IDE_TIMINGS
699
Atsushi Nemoto37897982008-10-23 23:22:07 +0200700config BLK_DEV_IDE_TX4939
701 tristate "TX4939 internal IDE support"
702 depends on SOC_TX4939
703 select BLK_DEV_IDEDMA_SFF
704
Stanislaw Gruszka6e5f1e12009-03-05 16:10:58 +0100705config BLK_DEV_IDE_AT91
706 tristate "Atmel AT91 (SAM9, CAP9, AT572D940HF) IDE support"
707 depends on ARM && ARCH_AT91 && !ARCH_AT91RM9200 && !ARCH_AT91X40
708 select IDE_TIMINGS
709
Linus Torvalds1da177e2005-04-16 15:20:36 -0700710config BLK_DEV_IDE_ICSIDE
711 tristate "ICS IDE interface support"
712 depends on ARM && ARCH_ACORN
713 help
714 On Acorn systems, say Y here if you wish to use the ICS IDE
715 interface card. This is not required for ICS partition support.
716 If you are unsure, say N to this.
717
718config BLK_DEV_IDEDMA_ICS
719 bool "ICS DMA support"
720 depends on BLK_DEV_IDE_ICSIDE
721 help
722 Say Y here if you want to add DMA (Direct Memory Access) support to
723 the ICS IDE driver.
724
Linus Torvalds1da177e2005-04-16 15:20:36 -0700725config BLK_DEV_IDE_RAPIDE
726 tristate "RapIDE interface support"
727 depends on ARM && ARCH_ACORN
728 help
729 Say Y here if you want to support the Yellowstone RapIDE controller
730 manufactured for use with Acorn computers.
731
Bartlomiej Zolnierkiewiczacfad6e2007-11-27 21:35:54 +0100732config IDE_H8300
Bartlomiej Zolnierkiewiczade2daf2008-01-26 20:13:07 +0100733 tristate "H8300 IDE support"
Bartlomiej Zolnierkiewiczacfad6e2007-11-27 21:35:54 +0100734 depends on H8300
Bartlomiej Zolnierkiewiczacfad6e2007-11-27 21:35:54 +0100735 default y
736 help
737 Enables the H8300 IDE driver.
738
Linus Torvalds1da177e2005-04-16 15:20:36 -0700739config BLK_DEV_GAYLE
Bartlomiej Zolnierkiewiczade2daf2008-01-26 20:13:07 +0100740 tristate "Amiga Gayle IDE interface support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700741 depends on AMIGA
742 help
743 This is the IDE driver for the Amiga Gayle IDE interface. It supports
744 both the `A1200 style' and `A4000 style' of the Gayle IDE interface,
Frans Pope665d502008-02-01 23:09:16 +0100745 This includes on-board IDE interfaces on some Amiga models (A600,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700746 A1200, A4000, and A4000T), and IDE interfaces on the Zorro expansion
747 bus (M-Tech E-Matrix 530 expansion card).
Linus Torvalds1da177e2005-04-16 15:20:36 -0700748
Bartlomiej Zolnierkiewicz9f5af4d2009-03-31 20:15:26 +0200749 It also provides support for the so-called `IDE doublers' (made
Frans Pope665d502008-02-01 23:09:16 +0100750 by various manufacturers, e.g. Eyetech) that can be connected to
751 the on-board IDE interface of some Amiga models. Using such an IDE
752 doubler, you can connect up to four instead of two IDE devices to
Bartlomiej Zolnierkiewicz9f5af4d2009-03-31 20:15:26 +0200753 the Amiga's on-board IDE interface. The feature is enabled at kernel
Bartlomiej Zolnierkiewicz64afc312008-05-14 23:06:16 +0200754 runtime using the "gayle.doubler" kernel boot parameter.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700755
Bartlomiej Zolnierkiewicz9f5af4d2009-03-31 20:15:26 +0200756 Say Y if you have an Amiga with a Gayle IDE interface and want to use
757 IDE devices (hard disks, CD-ROM drives, etc.) that are connected to
758 it.
759
760 Note that you also have to enable Zorro bus support if you want to
761 use Gayle IDE interfaces on the Zorro expansion bus.
762
Linus Torvalds1da177e2005-04-16 15:20:36 -0700763config BLK_DEV_BUDDHA
Bartlomiej Zolnierkiewiczade2daf2008-01-26 20:13:07 +0100764 tristate "Buddha/Catweasel/X-Surf IDE interface support (EXPERIMENTAL)"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700765 depends on ZORRO && EXPERIMENTAL
766 help
Frans Pope665d502008-02-01 23:09:16 +0100767 This is the IDE driver for the IDE interfaces on the Buddha, Catweasel
768 and X-Surf expansion boards. It supports up to two interfaces on the
769 Buddha, three on the Catweasel and two on the X-Surf.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700770
771 Say Y if you have a Buddha or Catweasel expansion board and want to
772 use IDE devices (hard disks, CD-ROM drives, etc.) that are connected
773 to one of its IDE interfaces.
774
775config BLK_DEV_FALCON_IDE
Bartlomiej Zolnierkiewiczade2daf2008-01-26 20:13:07 +0100776 tristate "Falcon IDE interface support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700777 depends on ATARI
778 help
Frans Pope665d502008-02-01 23:09:16 +0100779 This is the IDE driver for the on-board IDE interface on the Atari
Linus Torvalds1da177e2005-04-16 15:20:36 -0700780 Falcon. Say Y if you have a Falcon and want to use IDE devices (hard
Frans Pope665d502008-02-01 23:09:16 +0100781 disks, CD-ROM drives, etc.) that are connected to the on-board IDE
Linus Torvalds1da177e2005-04-16 15:20:36 -0700782 interface.
783
784config BLK_DEV_MAC_IDE
Bartlomiej Zolnierkiewiczade2daf2008-01-26 20:13:07 +0100785 tristate "Macintosh Quadra/Powerbook IDE interface support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700786 depends on MAC
787 help
Frans Pope665d502008-02-01 23:09:16 +0100788 This is the IDE driver for the on-board IDE interface on some m68k
Linus Torvalds1da177e2005-04-16 15:20:36 -0700789 Macintosh models. It supports both the `Quadra style' (used in
790 Quadra/ Centris 630 and Performa 588 models) and `Powerbook style'
791 (used in the Powerbook 150 and 190 models) IDE interface.
792
793 Say Y if you have such an Macintosh model and want to use IDE
794 devices (hard disks, CD-ROM drives, etc.) that are connected to the
Frans Pope665d502008-02-01 23:09:16 +0100795 on-board IDE interface.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700796
797config BLK_DEV_Q40IDE
Bartlomiej Zolnierkiewiczade2daf2008-01-26 20:13:07 +0100798 tristate "Q40/Q60 IDE interface support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700799 depends on Q40
800 help
801 Enable the on-board IDE controller in the Q40/Q60. This should
802 normally be on; disable it only if you are running a custom hard
803 drive subsystem through an expansion card.
804
Anton Salnikov7c7e92a2008-02-06 02:57:48 +0100805config BLK_DEV_PALMCHIP_BK3710
806 tristate "Palmchip bk3710 IDE controller support"
807 depends on ARCH_DAVINCI
Bartlomiej Zolnierkiewiczf06ab342008-07-16 20:33:37 +0200808 select IDE_TIMINGS
Sergei Shtylyov8e882ba2008-02-11 00:32:14 +0100809 select BLK_DEV_IDEDMA_SFF
Anton Salnikov7c7e92a2008-02-06 02:57:48 +0100810 help
811 Say Y here if you want to support the onchip IDE controller on the
812 TI DaVinci SoC
813
Linus Torvalds1da177e2005-04-16 15:20:36 -0700814# no isa -> no vlb
Bartlomiej Zolnierkiewicze4079df02008-04-18 00:46:35 +0200815if ISA && (ALPHA || X86 || MIPS)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700816
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200817comment "Other IDE chipsets support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700818comment "Note: most of these also require special kernel boot parameters"
819
820config BLK_DEV_4DRIVES
Frederik Deweerdt938da772008-04-26 17:36:31 +0200821 tristate "Generic 4 drives/port support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700822 help
823 Certain older chipsets, including the Tekram 690CD, use a single set
824 of I/O ports at 0x1f0 to control up to four drives, instead of the
825 customary two drives per port. Support for this can be enabled at
Bartlomiej Zolnierkiewiczffd4f6f2008-04-18 00:46:34 +0200826 runtime using the "ide-4drives.probe" kernel boot parameter if you
827 say Y here.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700828
829config BLK_DEV_ALI14XX
830 tristate "ALI M14xx support"
Bartlomiej Zolnierkiewiczcc57ccc2008-07-16 20:33:37 +0200831 select IDE_TIMINGS
Bartlomiej Zolnierkiewicz7f92b112008-12-29 20:27:37 +0100832 select IDE_LEGACY
Linus Torvalds1da177e2005-04-16 15:20:36 -0700833 help
Bartlomiej Zolnierkiewicz84913882007-03-03 17:48:55 +0100834 This driver is enabled at runtime using the "ali14xx.probe" kernel
Linus Torvalds1da177e2005-04-16 15:20:36 -0700835 boot parameter. It enables support for the secondary IDE interface
836 of the ALI M1439/1443/1445/1487/1489 chipsets, and permits faster
Randy Dunlap1c10e932008-03-07 21:53:50 +0100837 I/O speeds to be set as well.
838 See the files <file:Documentation/ide/ide.txt> and
839 <file:drivers/ide/legacy/ali14xx.c> for more info.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700840
841config BLK_DEV_DTC2278
842 tristate "DTC-2278 support"
Bartlomiej Zolnierkiewicz7eeaaaa2009-03-24 23:22:46 +0100843 select IDE_XFER_MODE
Bartlomiej Zolnierkiewicz7f92b112008-12-29 20:27:37 +0100844 select IDE_LEGACY
Linus Torvalds1da177e2005-04-16 15:20:36 -0700845 help
Bartlomiej Zolnierkiewicz84913882007-03-03 17:48:55 +0100846 This driver is enabled at runtime using the "dtc2278.probe" kernel
Linus Torvalds1da177e2005-04-16 15:20:36 -0700847 boot parameter. It enables support for the secondary IDE interface
848 of the DTC-2278 card, and permits faster I/O speeds to be set as
Randy Dunlap1c10e932008-03-07 21:53:50 +0100849 well. See the <file:Documentation/ide/ide.txt> and
Linus Torvalds1da177e2005-04-16 15:20:36 -0700850 <file:drivers/ide/legacy/dtc2278.c> files for more info.
851
852config BLK_DEV_HT6560B
853 tristate "Holtek HT6560B support"
Bartlomiej Zolnierkiewiczb32b76f2008-07-16 20:33:37 +0200854 select IDE_TIMINGS
Bartlomiej Zolnierkiewicz7f92b112008-12-29 20:27:37 +0100855 select IDE_LEGACY
Linus Torvalds1da177e2005-04-16 15:20:36 -0700856 help
Bartlomiej Zolnierkiewicz84913882007-03-03 17:48:55 +0100857 This driver is enabled at runtime using the "ht6560b.probe" kernel
Linus Torvalds1da177e2005-04-16 15:20:36 -0700858 boot parameter. It enables support for the secondary IDE interface
859 of the Holtek card, and permits faster I/O speeds to be set as well.
Randy Dunlap1c10e932008-03-07 21:53:50 +0100860 See the <file:Documentation/ide/ide.txt> and
Linus Torvalds1da177e2005-04-16 15:20:36 -0700861 <file:drivers/ide/legacy/ht6560b.c> files for more info.
862
863config BLK_DEV_QD65XX
864 tristate "QDI QD65xx support"
Bartlomiej Zolnierkiewicz2feecfa2008-07-16 20:33:37 +0200865 select IDE_TIMINGS
Bartlomiej Zolnierkiewicz7f92b112008-12-29 20:27:37 +0100866 select IDE_LEGACY
Linus Torvalds1da177e2005-04-16 15:20:36 -0700867 help
Bartlomiej Zolnierkiewicz84913882007-03-03 17:48:55 +0100868 This driver is enabled at runtime using the "qd65xx.probe" kernel
Linus Torvalds1da177e2005-04-16 15:20:36 -0700869 boot parameter. It permits faster I/O speeds to be set. See the
Randy Dunlap1c10e932008-03-07 21:53:50 +0100870 <file:Documentation/ide/ide.txt> and <file:drivers/ide/legacy/qd65xx.c>
Frans Pope665d502008-02-01 23:09:16 +0100871 for more info.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700872
873config BLK_DEV_UMC8672
874 tristate "UMC-8672 support"
Bartlomiej Zolnierkiewicz7eeaaaa2009-03-24 23:22:46 +0100875 select IDE_XFER_MODE
Bartlomiej Zolnierkiewicz7f92b112008-12-29 20:27:37 +0100876 select IDE_LEGACY
Linus Torvalds1da177e2005-04-16 15:20:36 -0700877 help
Bartlomiej Zolnierkiewicz84913882007-03-03 17:48:55 +0100878 This driver is enabled at runtime using the "umc8672.probe" kernel
Linus Torvalds1da177e2005-04-16 15:20:36 -0700879 boot parameter. It enables support for the secondary IDE interface
880 of the UMC-8672, and permits faster I/O speeds to be set as well.
Randy Dunlap1c10e932008-03-07 21:53:50 +0100881 See the files <file:Documentation/ide/ide.txt> and
Linus Torvalds1da177e2005-04-16 15:20:36 -0700882 <file:drivers/ide/legacy/umc8672.c> for more info.
883
884endif
885
886config BLK_DEV_IDEDMA
Bartlomiej Zolnierkiewicz53846572008-12-08 17:52:05 +0100887 def_bool BLK_DEV_IDEDMA_SFF || \
Sergei Shtylyov8e882ba2008-02-11 00:32:14 +0100888 BLK_DEV_IDEDMA_ICS || BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
Bartlomiej Zolnierkiewicz7eeaaaa2009-03-24 23:22:46 +0100889 select IDE_XFER_MODE
Linus Torvalds1da177e2005-04-16 15:20:36 -0700890
Jan Engelhardte0ff9cd2007-05-16 00:51:46 +0200891endif # IDE