blob: 2bddbf45518bbb7596a71bf83743eff9a12c9b60 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#ifndef __DRIVERS_PARIDE_H__
2#define __DRIVERS_PARIDE_H__
3
4/*
5 paride.h (c) 1997-8 Grant R. Guenther <grant@torque.net>
6 Under the terms of the GPL.
7
8 This file defines the interface between the high-level parallel
9 IDE device drivers (pd, pf, pcd, pt) and the adapter chips.
10
11*/
12
13/* Changes:
14
15 1.01 GRG 1998.05.05 init_proto, release_proto
16*/
17
18#define PARIDE_H_VERSION "1.01"
19
20/* Some adapters need to know what kind of device they are in
21
22 Values for devtype:
23*/
24
25#define PI_PD 0 /* IDE disk */
26#define PI_PCD 1 /* ATAPI CDrom */
27#define PI_PF 2 /* ATAPI disk */
28#define PI_PT 3 /* ATAPI tape */
29#define PI_PG 4 /* ATAPI generic */
30
31/* The paride module contains no state, instead the drivers allocate
32 a pi_adapter data structure and pass it to paride in every operation.
33
34*/
35
36struct pi_adapter {
37
38 struct pi_protocol *proto; /* adapter protocol */
39 int port; /* base address of parallel port */
40 int mode; /* transfer mode in use */
41 int delay; /* adapter delay setting */
42 int devtype; /* device type: PI_PD etc. */
43 char *device; /* name of driver */
44 int unit; /* unit number for chained adapters */
45 int saved_r0; /* saved port state */
46 int saved_r2; /* saved port state */
47 int reserved; /* number of ports reserved */
48 unsigned long private; /* for protocol module */
49
50 wait_queue_head_t parq; /* semaphore for parport sharing */
51 void *pardev; /* pointer to pardevice */
52 char *parname; /* parport name */
53 int claimed; /* parport has already been claimed */
54 void (*claim_cont)(void); /* continuation for parport wait */
55};
56
57typedef struct pi_adapter PIA;
58
59/* functions exported by paride to the high level drivers */
60
61extern int pi_init(PIA *pi,
62 int autoprobe, /* 1 to autoprobe */
63 int port, /* base port address */
64 int mode, /* -1 for autoprobe */
65 int unit, /* unit number, if supported */
66 int protocol, /* protocol to use */
67 int delay, /* -1 to use adapter specific default */
68 char * scratch, /* address of 512 byte buffer */
69 int devtype, /* device type: PI_PD, PI_PCD, etc ... */
70 int verbose, /* log verbose data while probing */
71 char *device /* name of the driver */
72 ); /* returns 0 on failure, 1 on success */
73
74extern void pi_release(PIA *pi);
75
76/* registers are addressed as (cont,regr)
77
78 cont: 0 for command register file, 1 for control register(s)
79 regr: 0-7 for register number.
80
81*/
82
83extern void pi_write_regr(PIA *pi, int cont, int regr, int val);
84
85extern int pi_read_regr(PIA *pi, int cont, int regr);
86
87extern void pi_write_block(PIA *pi, char * buf, int count);
88
89extern void pi_read_block(PIA *pi, char * buf, int count);
90
91extern void pi_connect(PIA *pi);
92
93extern void pi_disconnect(PIA *pi);
94
95extern void pi_do_claimed(PIA *pi, void (*cont)(void));
96extern int pi_schedule_claimed(PIA *pi, void (*cont)(void));
97
98/* macros and functions exported to the protocol modules */
99
100#define delay_p (pi->delay?udelay(pi->delay):(void)0)
101#define out_p(offs,byte) outb(byte,pi->port+offs); delay_p;
102#define in_p(offs) (delay_p,inb(pi->port+offs))
103
104#define w0(byte) {out_p(0,byte);}
105#define r0() (in_p(0) & 0xff)
106#define w1(byte) {out_p(1,byte);}
107#define r1() (in_p(1) & 0xff)
108#define w2(byte) {out_p(2,byte);}
109#define r2() (in_p(2) & 0xff)
110#define w3(byte) {out_p(3,byte);}
111#define w4(byte) {out_p(4,byte);}
112#define r4() (in_p(4) & 0xff)
113#define w4w(data) {outw(data,pi->port+4); delay_p;}
114#define w4l(data) {outl(data,pi->port+4); delay_p;}
115#define r4w() (delay_p,inw(pi->port+4)&0xffff)
116#define r4l() (delay_p,inl(pi->port+4)&0xffffffff)
117
118static inline u16 pi_swab16( char *b, int k)
119
120{ union { u16 u; char t[2]; } r;
121
122 r.t[0]=b[2*k+1]; r.t[1]=b[2*k];
123 return r.u;
124}
125
126static inline u32 pi_swab32( char *b, int k)
127
128{ union { u32 u; char f[4]; } r;
129
130 r.f[0]=b[4*k+1]; r.f[1]=b[4*k];
131 r.f[2]=b[4*k+3]; r.f[3]=b[4*k+2];
132 return r.u;
133}
134
135struct pi_protocol {
136
137 char name[8]; /* name for this protocol */
138 int index; /* index into protocol table */
139
140 int max_mode; /* max mode number */
141 int epp_first; /* modes >= this use 8 ports */
142
143 int default_delay; /* delay parameter if not specified */
144 int max_units; /* max chained units probed for */
145
146 void (*write_regr)(PIA *,int,int,int);
147 int (*read_regr)(PIA *,int,int);
148 void (*write_block)(PIA *,char *,int);
149 void (*read_block)(PIA *,char *,int);
150
151 void (*connect)(PIA *);
152 void (*disconnect)(PIA *);
153
154 int (*test_port)(PIA *);
155 int (*probe_unit)(PIA *);
156 int (*test_proto)(PIA *,char *,int);
157 void (*log_adapter)(PIA *,char *,int);
158
159 int (*init_proto)(PIA *);
160 void (*release_proto)(PIA *);
161 struct module *owner;
162};
163
164typedef struct pi_protocol PIP;
165
Alexey Dobriyanf4330002006-12-06 20:36:20 -0800166extern int paride_register( PIP * );
167extern void paride_unregister ( PIP * );
Linus Torvalds1da177e2005-04-16 15:20:36 -0700168
169#endif /* __DRIVERS_PARIDE_H__ */
170/* end of paride.h */