blob: e4e1dccd1f2f344b4a4b47b2bdb19f5c4303871b [file] [log] [blame]
Rasmus Villemoes9d99a2e2016-03-22 20:32:04 +01001/*
2 * The canonical list of T10 Additional Sense Codes is available at:
3 * http://www.t10.org/lists/asc-num.txt [most recent: 20141221]
4 */
5
6SENSE_CODE(0x0000, "No additional sense information")
7SENSE_CODE(0x0001, "Filemark detected")
8SENSE_CODE(0x0002, "End-of-partition/medium detected")
9SENSE_CODE(0x0003, "Setmark detected")
10SENSE_CODE(0x0004, "Beginning-of-partition/medium detected")
11SENSE_CODE(0x0005, "End-of-data detected")
12SENSE_CODE(0x0006, "I/O process terminated")
13SENSE_CODE(0x0007, "Programmable early warning detected")
14SENSE_CODE(0x0011, "Audio play operation in progress")
15SENSE_CODE(0x0012, "Audio play operation paused")
16SENSE_CODE(0x0013, "Audio play operation successfully completed")
17SENSE_CODE(0x0014, "Audio play operation stopped due to error")
18SENSE_CODE(0x0015, "No current audio status to return")
19SENSE_CODE(0x0016, "Operation in progress")
20SENSE_CODE(0x0017, "Cleaning requested")
21SENSE_CODE(0x0018, "Erase operation in progress")
22SENSE_CODE(0x0019, "Locate operation in progress")
23SENSE_CODE(0x001A, "Rewind operation in progress")
24SENSE_CODE(0x001B, "Set capacity operation in progress")
25SENSE_CODE(0x001C, "Verify operation in progress")
26SENSE_CODE(0x001D, "ATA pass through information available")
27SENSE_CODE(0x001E, "Conflicting SA creation request")
28SENSE_CODE(0x001F, "Logical unit transitioning to another power condition")
29SENSE_CODE(0x0020, "Extended copy information available")
30SENSE_CODE(0x0021, "Atomic command aborted due to ACA")
31
32SENSE_CODE(0x0100, "No index/sector signal")
33
34SENSE_CODE(0x0200, "No seek complete")
35
36SENSE_CODE(0x0300, "Peripheral device write fault")
37SENSE_CODE(0x0301, "No write current")
38SENSE_CODE(0x0302, "Excessive write errors")
39
40SENSE_CODE(0x0400, "Logical unit not ready, cause not reportable")
41SENSE_CODE(0x0401, "Logical unit is in process of becoming ready")
42SENSE_CODE(0x0402, "Logical unit not ready, initializing command required")
43SENSE_CODE(0x0403, "Logical unit not ready, manual intervention required")
44SENSE_CODE(0x0404, "Logical unit not ready, format in progress")
45SENSE_CODE(0x0405, "Logical unit not ready, rebuild in progress")
46SENSE_CODE(0x0406, "Logical unit not ready, recalculation in progress")
47SENSE_CODE(0x0407, "Logical unit not ready, operation in progress")
48SENSE_CODE(0x0408, "Logical unit not ready, long write in progress")
49SENSE_CODE(0x0409, "Logical unit not ready, self-test in progress")
50SENSE_CODE(0x040A, "Logical unit not accessible, asymmetric access state transition")
51SENSE_CODE(0x040B, "Logical unit not accessible, target port in standby state")
52SENSE_CODE(0x040C, "Logical unit not accessible, target port in unavailable state")
53SENSE_CODE(0x040D, "Logical unit not ready, structure check required")
54SENSE_CODE(0x040E, "Logical unit not ready, security session in progress")
55SENSE_CODE(0x0410, "Logical unit not ready, auxiliary memory not accessible")
56SENSE_CODE(0x0411, "Logical unit not ready, notify (enable spinup) required")
57SENSE_CODE(0x0412, "Logical unit not ready, offline")
58SENSE_CODE(0x0413, "Logical unit not ready, SA creation in progress")
59SENSE_CODE(0x0414, "Logical unit not ready, space allocation in progress")
60SENSE_CODE(0x0415, "Logical unit not ready, robotics disabled")
61SENSE_CODE(0x0416, "Logical unit not ready, configuration required")
62SENSE_CODE(0x0417, "Logical unit not ready, calibration required")
63SENSE_CODE(0x0418, "Logical unit not ready, a door is open")
64SENSE_CODE(0x0419, "Logical unit not ready, operating in sequential mode")
65SENSE_CODE(0x041A, "Logical unit not ready, start stop unit command in progress")
66SENSE_CODE(0x041B, "Logical unit not ready, sanitize in progress")
67SENSE_CODE(0x041C, "Logical unit not ready, additional power use not yet granted")
68SENSE_CODE(0x041D, "Logical unit not ready, configuration in progress")
69SENSE_CODE(0x041E, "Logical unit not ready, microcode activation required")
70SENSE_CODE(0x041F, "Logical unit not ready, microcode download required")
71SENSE_CODE(0x0420, "Logical unit not ready, logical unit reset required")
72SENSE_CODE(0x0421, "Logical unit not ready, hard reset required")
73SENSE_CODE(0x0422, "Logical unit not ready, power cycle required")
74
75SENSE_CODE(0x0500, "Logical unit does not respond to selection")
76
77SENSE_CODE(0x0600, "No reference position found")
78
79SENSE_CODE(0x0700, "Multiple peripheral devices selected")
80
81SENSE_CODE(0x0800, "Logical unit communication failure")
82SENSE_CODE(0x0801, "Logical unit communication time-out")
83SENSE_CODE(0x0802, "Logical unit communication parity error")
84SENSE_CODE(0x0803, "Logical unit communication CRC error (Ultra-DMA/32)")
85SENSE_CODE(0x0804, "Unreachable copy target")
86
87SENSE_CODE(0x0900, "Track following error")
88SENSE_CODE(0x0901, "Tracking servo failure")
89SENSE_CODE(0x0902, "Focus servo failure")
90SENSE_CODE(0x0903, "Spindle servo failure")
91SENSE_CODE(0x0904, "Head select fault")
92SENSE_CODE(0x0905, "Vibration induced tracking error")
93
94SENSE_CODE(0x0A00, "Error log overflow")
95
96SENSE_CODE(0x0B00, "Warning")
97SENSE_CODE(0x0B01, "Warning - specified temperature exceeded")
98SENSE_CODE(0x0B02, "Warning - enclosure degraded")
99SENSE_CODE(0x0B03, "Warning - background self-test failed")
100SENSE_CODE(0x0B04, "Warning - background pre-scan detected medium error")
101SENSE_CODE(0x0B05, "Warning - background medium scan detected medium error")
102SENSE_CODE(0x0B06, "Warning - non-volatile cache now volatile")
103SENSE_CODE(0x0B07, "Warning - degraded power to non-volatile cache")
104SENSE_CODE(0x0B08, "Warning - power loss expected")
105SENSE_CODE(0x0B09, "Warning - device statistics notification active")
106
107SENSE_CODE(0x0C00, "Write error")
108SENSE_CODE(0x0C01, "Write error - recovered with auto reallocation")
109SENSE_CODE(0x0C02, "Write error - auto reallocation failed")
110SENSE_CODE(0x0C03, "Write error - recommend reassignment")
111SENSE_CODE(0x0C04, "Compression check miscompare error")
112SENSE_CODE(0x0C05, "Data expansion occurred during compression")
113SENSE_CODE(0x0C06, "Block not compressible")
114SENSE_CODE(0x0C07, "Write error - recovery needed")
115SENSE_CODE(0x0C08, "Write error - recovery failed")
116SENSE_CODE(0x0C09, "Write error - loss of streaming")
117SENSE_CODE(0x0C0A, "Write error - padding blocks added")
118SENSE_CODE(0x0C0B, "Auxiliary memory write error")
119SENSE_CODE(0x0C0C, "Write error - unexpected unsolicited data")
120SENSE_CODE(0x0C0D, "Write error - not enough unsolicited data")
121SENSE_CODE(0x0C0E, "Multiple write errors")
122SENSE_CODE(0x0C0F, "Defects in error window")
123SENSE_CODE(0x0C10, "Incomplete multiple atomic write operations")
124
125SENSE_CODE(0x0D00, "Error detected by third party temporary initiator")
126SENSE_CODE(0x0D01, "Third party device failure")
127SENSE_CODE(0x0D02, "Copy target device not reachable")
128SENSE_CODE(0x0D03, "Incorrect copy target device type")
129SENSE_CODE(0x0D04, "Copy target device data underrun")
130SENSE_CODE(0x0D05, "Copy target device data overrun")
131
132SENSE_CODE(0x0E00, "Invalid information unit")
133SENSE_CODE(0x0E01, "Information unit too short")
134SENSE_CODE(0x0E02, "Information unit too long")
135SENSE_CODE(0x0E03, "Invalid field in command information unit")
136
137SENSE_CODE(0x1000, "Id CRC or ECC error")
138SENSE_CODE(0x1001, "Logical block guard check failed")
139SENSE_CODE(0x1002, "Logical block application tag check failed")
140SENSE_CODE(0x1003, "Logical block reference tag check failed")
141SENSE_CODE(0x1004, "Logical block protection error on recover buffered data")
142SENSE_CODE(0x1005, "Logical block protection method error")
143
144SENSE_CODE(0x1100, "Unrecovered read error")
145SENSE_CODE(0x1101, "Read retries exhausted")
146SENSE_CODE(0x1102, "Error too long to correct")
147SENSE_CODE(0x1103, "Multiple read errors")
148SENSE_CODE(0x1104, "Unrecovered read error - auto reallocate failed")
149SENSE_CODE(0x1105, "L-EC uncorrectable error")
150SENSE_CODE(0x1106, "CIRC unrecovered error")
151SENSE_CODE(0x1107, "Data re-synchronization error")
152SENSE_CODE(0x1108, "Incomplete block read")
153SENSE_CODE(0x1109, "No gap found")
154SENSE_CODE(0x110A, "Miscorrected error")
155SENSE_CODE(0x110B, "Unrecovered read error - recommend reassignment")
156SENSE_CODE(0x110C, "Unrecovered read error - recommend rewrite the data")
157SENSE_CODE(0x110D, "De-compression CRC error")
158SENSE_CODE(0x110E, "Cannot decompress using declared algorithm")
159SENSE_CODE(0x110F, "Error reading UPC/EAN number")
160SENSE_CODE(0x1110, "Error reading ISRC number")
161SENSE_CODE(0x1111, "Read error - loss of streaming")
162SENSE_CODE(0x1112, "Auxiliary memory read error")
163SENSE_CODE(0x1113, "Read error - failed retransmission request")
164SENSE_CODE(0x1114, "Read error - lba marked bad by application client")
165SENSE_CODE(0x1115, "Write after sanitize required")
166
167SENSE_CODE(0x1200, "Address mark not found for id field")
168
169SENSE_CODE(0x1300, "Address mark not found for data field")
170
171SENSE_CODE(0x1400, "Recorded entity not found")
172SENSE_CODE(0x1401, "Record not found")
173SENSE_CODE(0x1402, "Filemark or setmark not found")
174SENSE_CODE(0x1403, "End-of-data not found")
175SENSE_CODE(0x1404, "Block sequence error")
176SENSE_CODE(0x1405, "Record not found - recommend reassignment")
177SENSE_CODE(0x1406, "Record not found - data auto-reallocated")
178SENSE_CODE(0x1407, "Locate operation failure")
179
180SENSE_CODE(0x1500, "Random positioning error")
181SENSE_CODE(0x1501, "Mechanical positioning error")
182SENSE_CODE(0x1502, "Positioning error detected by read of medium")
183
184SENSE_CODE(0x1600, "Data synchronization mark error")
185SENSE_CODE(0x1601, "Data sync error - data rewritten")
186SENSE_CODE(0x1602, "Data sync error - recommend rewrite")
187SENSE_CODE(0x1603, "Data sync error - data auto-reallocated")
188SENSE_CODE(0x1604, "Data sync error - recommend reassignment")
189
190SENSE_CODE(0x1700, "Recovered data with no error correction applied")
191SENSE_CODE(0x1701, "Recovered data with retries")
192SENSE_CODE(0x1702, "Recovered data with positive head offset")
193SENSE_CODE(0x1703, "Recovered data with negative head offset")
194SENSE_CODE(0x1704, "Recovered data with retries and/or circ applied")
195SENSE_CODE(0x1705, "Recovered data using previous sector id")
196SENSE_CODE(0x1706, "Recovered data without ECC - data auto-reallocated")
197SENSE_CODE(0x1707, "Recovered data without ECC - recommend reassignment")
198SENSE_CODE(0x1708, "Recovered data without ECC - recommend rewrite")
199SENSE_CODE(0x1709, "Recovered data without ECC - data rewritten")
200
201SENSE_CODE(0x1800, "Recovered data with error correction applied")
202SENSE_CODE(0x1801, "Recovered data with error corr. & retries applied")
203SENSE_CODE(0x1802, "Recovered data - data auto-reallocated")
204SENSE_CODE(0x1803, "Recovered data with CIRC")
205SENSE_CODE(0x1804, "Recovered data with L-EC")
206SENSE_CODE(0x1805, "Recovered data - recommend reassignment")
207SENSE_CODE(0x1806, "Recovered data - recommend rewrite")
208SENSE_CODE(0x1807, "Recovered data with ECC - data rewritten")
209SENSE_CODE(0x1808, "Recovered data with linking")
210
211SENSE_CODE(0x1900, "Defect list error")
212SENSE_CODE(0x1901, "Defect list not available")
213SENSE_CODE(0x1902, "Defect list error in primary list")
214SENSE_CODE(0x1903, "Defect list error in grown list")
215
216SENSE_CODE(0x1A00, "Parameter list length error")
217
218SENSE_CODE(0x1B00, "Synchronous data transfer error")
219
220SENSE_CODE(0x1C00, "Defect list not found")
221SENSE_CODE(0x1C01, "Primary defect list not found")
222SENSE_CODE(0x1C02, "Grown defect list not found")
223
224SENSE_CODE(0x1D00, "Miscompare during verify operation")
225SENSE_CODE(0x1D01, "Miscompare verify of unmapped LBA")
226
227SENSE_CODE(0x1E00, "Recovered id with ECC correction")
228
229SENSE_CODE(0x1F00, "Partial defect list transfer")
230
231SENSE_CODE(0x2000, "Invalid command operation code")
232SENSE_CODE(0x2001, "Access denied - initiator pending-enrolled")
233SENSE_CODE(0x2002, "Access denied - no access rights")
234SENSE_CODE(0x2003, "Access denied - invalid mgmt id key")
235SENSE_CODE(0x2004, "Illegal command while in write capable state")
236SENSE_CODE(0x2005, "Obsolete")
237SENSE_CODE(0x2006, "Illegal command while in explicit address mode")
238SENSE_CODE(0x2007, "Illegal command while in implicit address mode")
239SENSE_CODE(0x2008, "Access denied - enrollment conflict")
240SENSE_CODE(0x2009, "Access denied - invalid LU identifier")
241SENSE_CODE(0x200A, "Access denied - invalid proxy token")
242SENSE_CODE(0x200B, "Access denied - ACL LUN conflict")
243SENSE_CODE(0x200C, "Illegal command when not in append-only mode")
244
245SENSE_CODE(0x2100, "Logical block address out of range")
246SENSE_CODE(0x2101, "Invalid element address")
247SENSE_CODE(0x2102, "Invalid address for write")
248SENSE_CODE(0x2103, "Invalid write crossing layer jump")
249SENSE_CODE(0x2104, "Unaligned write command")
250SENSE_CODE(0x2105, "Write boundary violation")
251SENSE_CODE(0x2106, "Attempt to read invalid data")
252SENSE_CODE(0x2107, "Read boundary violation")
253
254SENSE_CODE(0x2200, "Illegal function (use 20 00, 24 00, or 26 00)")
255
256SENSE_CODE(0x2300, "Invalid token operation, cause not reportable")
257SENSE_CODE(0x2301, "Invalid token operation, unsupported token type")
258SENSE_CODE(0x2302, "Invalid token operation, remote token usage not supported")
259SENSE_CODE(0x2303, "Invalid token operation, remote rod token creation not supported")
260SENSE_CODE(0x2304, "Invalid token operation, token unknown")
261SENSE_CODE(0x2305, "Invalid token operation, token corrupt")
262SENSE_CODE(0x2306, "Invalid token operation, token revoked")
263SENSE_CODE(0x2307, "Invalid token operation, token expired")
264SENSE_CODE(0x2308, "Invalid token operation, token cancelled")
265SENSE_CODE(0x2309, "Invalid token operation, token deleted")
266SENSE_CODE(0x230A, "Invalid token operation, invalid token length")
267
268SENSE_CODE(0x2400, "Invalid field in cdb")
269SENSE_CODE(0x2401, "CDB decryption error")
270SENSE_CODE(0x2402, "Obsolete")
271SENSE_CODE(0x2403, "Obsolete")
272SENSE_CODE(0x2404, "Security audit value frozen")
273SENSE_CODE(0x2405, "Security working key frozen")
274SENSE_CODE(0x2406, "Nonce not unique")
275SENSE_CODE(0x2407, "Nonce timestamp out of range")
276SENSE_CODE(0x2408, "Invalid XCDB")
277
278SENSE_CODE(0x2500, "Logical unit not supported")
279
280SENSE_CODE(0x2600, "Invalid field in parameter list")
281SENSE_CODE(0x2601, "Parameter not supported")
282SENSE_CODE(0x2602, "Parameter value invalid")
283SENSE_CODE(0x2603, "Threshold parameters not supported")
284SENSE_CODE(0x2604, "Invalid release of persistent reservation")
285SENSE_CODE(0x2605, "Data decryption error")
286SENSE_CODE(0x2606, "Too many target descriptors")
287SENSE_CODE(0x2607, "Unsupported target descriptor type code")
288SENSE_CODE(0x2608, "Too many segment descriptors")
289SENSE_CODE(0x2609, "Unsupported segment descriptor type code")
290SENSE_CODE(0x260A, "Unexpected inexact segment")
291SENSE_CODE(0x260B, "Inline data length exceeded")
292SENSE_CODE(0x260C, "Invalid operation for copy source or destination")
293SENSE_CODE(0x260D, "Copy segment granularity violation")
294SENSE_CODE(0x260E, "Invalid parameter while port is enabled")
295SENSE_CODE(0x260F, "Invalid data-out buffer integrity check value")
296SENSE_CODE(0x2610, "Data decryption key fail limit reached")
297SENSE_CODE(0x2611, "Incomplete key-associated data set")
298SENSE_CODE(0x2612, "Vendor specific key reference not found")
299
300SENSE_CODE(0x2700, "Write protected")
301SENSE_CODE(0x2701, "Hardware write protected")
302SENSE_CODE(0x2702, "Logical unit software write protected")
303SENSE_CODE(0x2703, "Associated write protect")
304SENSE_CODE(0x2704, "Persistent write protect")
305SENSE_CODE(0x2705, "Permanent write protect")
306SENSE_CODE(0x2706, "Conditional write protect")
307SENSE_CODE(0x2707, "Space allocation failed write protect")
308SENSE_CODE(0x2708, "Zone is read only")
309
310SENSE_CODE(0x2800, "Not ready to ready change, medium may have changed")
311SENSE_CODE(0x2801, "Import or export element accessed")
312SENSE_CODE(0x2802, "Format-layer may have changed")
313SENSE_CODE(0x2803, "Import/export element accessed, medium changed")
314
315SENSE_CODE(0x2900, "Power on, reset, or bus device reset occurred")
316SENSE_CODE(0x2901, "Power on occurred")
317SENSE_CODE(0x2902, "Scsi bus reset occurred")
318SENSE_CODE(0x2903, "Bus device reset function occurred")
319SENSE_CODE(0x2904, "Device internal reset")
320SENSE_CODE(0x2905, "Transceiver mode changed to single-ended")
321SENSE_CODE(0x2906, "Transceiver mode changed to lvd")
322SENSE_CODE(0x2907, "I_T nexus loss occurred")
323
324SENSE_CODE(0x2A00, "Parameters changed")
325SENSE_CODE(0x2A01, "Mode parameters changed")
326SENSE_CODE(0x2A02, "Log parameters changed")
327SENSE_CODE(0x2A03, "Reservations preempted")
328SENSE_CODE(0x2A04, "Reservations released")
329SENSE_CODE(0x2A05, "Registrations preempted")
330SENSE_CODE(0x2A06, "Asymmetric access state changed")
331SENSE_CODE(0x2A07, "Implicit asymmetric access state transition failed")
332SENSE_CODE(0x2A08, "Priority changed")
333SENSE_CODE(0x2A09, "Capacity data has changed")
334SENSE_CODE(0x2A0A, "Error history I_T nexus cleared")
335SENSE_CODE(0x2A0B, "Error history snapshot released")
336SENSE_CODE(0x2A0C, "Error recovery attributes have changed")
337SENSE_CODE(0x2A0D, "Data encryption capabilities changed")
338SENSE_CODE(0x2A10, "Timestamp changed")
339SENSE_CODE(0x2A11, "Data encryption parameters changed by another i_t nexus")
340SENSE_CODE(0x2A12, "Data encryption parameters changed by vendor specific event")
341SENSE_CODE(0x2A13, "Data encryption key instance counter has changed")
342SENSE_CODE(0x2A14, "SA creation capabilities data has changed")
343SENSE_CODE(0x2A15, "Medium removal prevention preempted")
344
345SENSE_CODE(0x2B00, "Copy cannot execute since host cannot disconnect")
346
347SENSE_CODE(0x2C00, "Command sequence error")
348SENSE_CODE(0x2C01, "Too many windows specified")
349SENSE_CODE(0x2C02, "Invalid combination of windows specified")
350SENSE_CODE(0x2C03, "Current program area is not empty")
351SENSE_CODE(0x2C04, "Current program area is empty")
352SENSE_CODE(0x2C05, "Illegal power condition request")
353SENSE_CODE(0x2C06, "Persistent prevent conflict")
354SENSE_CODE(0x2C07, "Previous busy status")
355SENSE_CODE(0x2C08, "Previous task set full status")
356SENSE_CODE(0x2C09, "Previous reservation conflict status")
357SENSE_CODE(0x2C0A, "Partition or collection contains user objects")
358SENSE_CODE(0x2C0B, "Not reserved")
359SENSE_CODE(0x2C0C, "Orwrite generation does not match")
360SENSE_CODE(0x2C0D, "Reset write pointer not allowed")
361SENSE_CODE(0x2C0E, "Zone is offline")
362
363SENSE_CODE(0x2D00, "Overwrite error on update in place")
364
365SENSE_CODE(0x2E00, "Insufficient time for operation")
366SENSE_CODE(0x2E01, "Command timeout before processing")
367SENSE_CODE(0x2E02, "Command timeout during processing")
368SENSE_CODE(0x2E03, "Command timeout during processing due to error recovery")
369
370SENSE_CODE(0x2F00, "Commands cleared by another initiator")
371SENSE_CODE(0x2F01, "Commands cleared by power loss notification")
372SENSE_CODE(0x2F02, "Commands cleared by device server")
373SENSE_CODE(0x2F03, "Some commands cleared by queuing layer event")
374
375SENSE_CODE(0x3000, "Incompatible medium installed")
376SENSE_CODE(0x3001, "Cannot read medium - unknown format")
377SENSE_CODE(0x3002, "Cannot read medium - incompatible format")
378SENSE_CODE(0x3003, "Cleaning cartridge installed")
379SENSE_CODE(0x3004, "Cannot write medium - unknown format")
380SENSE_CODE(0x3005, "Cannot write medium - incompatible format")
381SENSE_CODE(0x3006, "Cannot format medium - incompatible medium")
382SENSE_CODE(0x3007, "Cleaning failure")
383SENSE_CODE(0x3008, "Cannot write - application code mismatch")
384SENSE_CODE(0x3009, "Current session not fixated for append")
385SENSE_CODE(0x300A, "Cleaning request rejected")
386SENSE_CODE(0x300C, "WORM medium - overwrite attempted")
387SENSE_CODE(0x300D, "WORM medium - integrity check")
388SENSE_CODE(0x3010, "Medium not formatted")
389SENSE_CODE(0x3011, "Incompatible volume type")
390SENSE_CODE(0x3012, "Incompatible volume qualifier")
391SENSE_CODE(0x3013, "Cleaning volume expired")
392
393SENSE_CODE(0x3100, "Medium format corrupted")
394SENSE_CODE(0x3101, "Format command failed")
395SENSE_CODE(0x3102, "Zoned formatting failed due to spare linking")
396SENSE_CODE(0x3103, "Sanitize command failed")
397
398SENSE_CODE(0x3200, "No defect spare location available")
399SENSE_CODE(0x3201, "Defect list update failure")
400
401SENSE_CODE(0x3300, "Tape length error")
402
403SENSE_CODE(0x3400, "Enclosure failure")
404
405SENSE_CODE(0x3500, "Enclosure services failure")
406SENSE_CODE(0x3501, "Unsupported enclosure function")
407SENSE_CODE(0x3502, "Enclosure services unavailable")
408SENSE_CODE(0x3503, "Enclosure services transfer failure")
409SENSE_CODE(0x3504, "Enclosure services transfer refused")
410SENSE_CODE(0x3505, "Enclosure services checksum error")
411
412SENSE_CODE(0x3600, "Ribbon, ink, or toner failure")
413
414SENSE_CODE(0x3700, "Rounded parameter")
415
416SENSE_CODE(0x3800, "Event status notification")
417SENSE_CODE(0x3802, "Esn - power management class event")
418SENSE_CODE(0x3804, "Esn - media class event")
419SENSE_CODE(0x3806, "Esn - device busy class event")
420SENSE_CODE(0x3807, "Thin Provisioning soft threshold reached")
421
422SENSE_CODE(0x3900, "Saving parameters not supported")
423
424SENSE_CODE(0x3A00, "Medium not present")
425SENSE_CODE(0x3A01, "Medium not present - tray closed")
426SENSE_CODE(0x3A02, "Medium not present - tray open")
427SENSE_CODE(0x3A03, "Medium not present - loadable")
428SENSE_CODE(0x3A04, "Medium not present - medium auxiliary memory accessible")
429
430SENSE_CODE(0x3B00, "Sequential positioning error")
431SENSE_CODE(0x3B01, "Tape position error at beginning-of-medium")
432SENSE_CODE(0x3B02, "Tape position error at end-of-medium")
433SENSE_CODE(0x3B03, "Tape or electronic vertical forms unit not ready")
434SENSE_CODE(0x3B04, "Slew failure")
435SENSE_CODE(0x3B05, "Paper jam")
436SENSE_CODE(0x3B06, "Failed to sense top-of-form")
437SENSE_CODE(0x3B07, "Failed to sense bottom-of-form")
438SENSE_CODE(0x3B08, "Reposition error")
439SENSE_CODE(0x3B09, "Read past end of medium")
440SENSE_CODE(0x3B0A, "Read past beginning of medium")
441SENSE_CODE(0x3B0B, "Position past end of medium")
442SENSE_CODE(0x3B0C, "Position past beginning of medium")
443SENSE_CODE(0x3B0D, "Medium destination element full")
444SENSE_CODE(0x3B0E, "Medium source element empty")
445SENSE_CODE(0x3B0F, "End of medium reached")
446SENSE_CODE(0x3B11, "Medium magazine not accessible")
447SENSE_CODE(0x3B12, "Medium magazine removed")
448SENSE_CODE(0x3B13, "Medium magazine inserted")
449SENSE_CODE(0x3B14, "Medium magazine locked")
450SENSE_CODE(0x3B15, "Medium magazine unlocked")
451SENSE_CODE(0x3B16, "Mechanical positioning or changer error")
452SENSE_CODE(0x3B17, "Read past end of user object")
453SENSE_CODE(0x3B18, "Element disabled")
454SENSE_CODE(0x3B19, "Element enabled")
455SENSE_CODE(0x3B1A, "Data transfer device removed")
456SENSE_CODE(0x3B1B, "Data transfer device inserted")
457SENSE_CODE(0x3B1C, "Too many logical objects on partition to support operation")
458
459SENSE_CODE(0x3D00, "Invalid bits in identify message")
460
461SENSE_CODE(0x3E00, "Logical unit has not self-configured yet")
462SENSE_CODE(0x3E01, "Logical unit failure")
463SENSE_CODE(0x3E02, "Timeout on logical unit")
464SENSE_CODE(0x3E03, "Logical unit failed self-test")
465SENSE_CODE(0x3E04, "Logical unit unable to update self-test log")
466
467SENSE_CODE(0x3F00, "Target operating conditions have changed")
468SENSE_CODE(0x3F01, "Microcode has been changed")
469SENSE_CODE(0x3F02, "Changed operating definition")
470SENSE_CODE(0x3F03, "Inquiry data has changed")
471SENSE_CODE(0x3F04, "Component device attached")
472SENSE_CODE(0x3F05, "Device identifier changed")
473SENSE_CODE(0x3F06, "Redundancy group created or modified")
474SENSE_CODE(0x3F07, "Redundancy group deleted")
475SENSE_CODE(0x3F08, "Spare created or modified")
476SENSE_CODE(0x3F09, "Spare deleted")
477SENSE_CODE(0x3F0A, "Volume set created or modified")
478SENSE_CODE(0x3F0B, "Volume set deleted")
479SENSE_CODE(0x3F0C, "Volume set deassigned")
480SENSE_CODE(0x3F0D, "Volume set reassigned")
481SENSE_CODE(0x3F0E, "Reported luns data has changed")
482SENSE_CODE(0x3F0F, "Echo buffer overwritten")
483SENSE_CODE(0x3F10, "Medium loadable")
484SENSE_CODE(0x3F11, "Medium auxiliary memory accessible")
485SENSE_CODE(0x3F12, "iSCSI IP address added")
486SENSE_CODE(0x3F13, "iSCSI IP address removed")
487SENSE_CODE(0x3F14, "iSCSI IP address changed")
488SENSE_CODE(0x3F15, "Inspect referrals sense descriptors")
489SENSE_CODE(0x3F16, "Microcode has been changed without reset")
490/*
491 * SENSE_CODE(0x40NN, "Ram failure")
492 * SENSE_CODE(0x40NN, "Diagnostic failure on component nn")
493 * SENSE_CODE(0x41NN, "Data path failure")
494 * SENSE_CODE(0x42NN, "Power-on or self-test failure")
495 */
496SENSE_CODE(0x4300, "Message error")
497
498SENSE_CODE(0x4400, "Internal target failure")
499SENSE_CODE(0x4401, "Persistent reservation information lost")
500SENSE_CODE(0x4471, "ATA device failed set features")
501
502SENSE_CODE(0x4500, "Select or reselect failure")
503
504SENSE_CODE(0x4600, "Unsuccessful soft reset")
505
506SENSE_CODE(0x4700, "Scsi parity error")
507SENSE_CODE(0x4701, "Data phase CRC error detected")
508SENSE_CODE(0x4702, "Scsi parity error detected during st data phase")
509SENSE_CODE(0x4703, "Information unit iuCRC error detected")
510SENSE_CODE(0x4704, "Asynchronous information protection error detected")
511SENSE_CODE(0x4705, "Protocol service CRC error")
512SENSE_CODE(0x4706, "Phy test function in progress")
513SENSE_CODE(0x477f, "Some commands cleared by iSCSI Protocol event")
514
515SENSE_CODE(0x4800, "Initiator detected error message received")
516
517SENSE_CODE(0x4900, "Invalid message error")
518
519SENSE_CODE(0x4A00, "Command phase error")
520
521SENSE_CODE(0x4B00, "Data phase error")
522SENSE_CODE(0x4B01, "Invalid target port transfer tag received")
523SENSE_CODE(0x4B02, "Too much write data")
524SENSE_CODE(0x4B03, "Ack/nak timeout")
525SENSE_CODE(0x4B04, "Nak received")
526SENSE_CODE(0x4B05, "Data offset error")
527SENSE_CODE(0x4B06, "Initiator response timeout")
528SENSE_CODE(0x4B07, "Connection lost")
529SENSE_CODE(0x4B08, "Data-in buffer overflow - data buffer size")
530SENSE_CODE(0x4B09, "Data-in buffer overflow - data buffer descriptor area")
531SENSE_CODE(0x4B0A, "Data-in buffer error")
532SENSE_CODE(0x4B0B, "Data-out buffer overflow - data buffer size")
533SENSE_CODE(0x4B0C, "Data-out buffer overflow - data buffer descriptor area")
534SENSE_CODE(0x4B0D, "Data-out buffer error")
535SENSE_CODE(0x4B0E, "PCIe fabric error")
536SENSE_CODE(0x4B0F, "PCIe completion timeout")
537SENSE_CODE(0x4B10, "PCIe completer abort")
538SENSE_CODE(0x4B11, "PCIe poisoned tlp received")
539SENSE_CODE(0x4B12, "PCIe eCRC check failed")
540SENSE_CODE(0x4B13, "PCIe unsupported request")
541SENSE_CODE(0x4B14, "PCIe acs violation")
542SENSE_CODE(0x4B15, "PCIe tlp prefix blocked")
543
544SENSE_CODE(0x4C00, "Logical unit failed self-configuration")
545/*
546 * SENSE_CODE(0x4DNN, "Tagged overlapped commands (nn = queue tag)")
547 */
548SENSE_CODE(0x4E00, "Overlapped commands attempted")
549
550SENSE_CODE(0x5000, "Write append error")
551SENSE_CODE(0x5001, "Write append position error")
552SENSE_CODE(0x5002, "Position error related to timing")
553
554SENSE_CODE(0x5100, "Erase failure")
555SENSE_CODE(0x5101, "Erase failure - incomplete erase operation detected")
556
557SENSE_CODE(0x5200, "Cartridge fault")
558
559SENSE_CODE(0x5300, "Media load or eject failed")
560SENSE_CODE(0x5301, "Unload tape failure")
561SENSE_CODE(0x5302, "Medium removal prevented")
562SENSE_CODE(0x5303, "Medium removal prevented by data transfer element")
563SENSE_CODE(0x5304, "Medium thread or unthread failure")
564SENSE_CODE(0x5305, "Volume identifier invalid")
565SENSE_CODE(0x5306, "Volume identifier missing")
566SENSE_CODE(0x5307, "Duplicate volume identifier")
567SENSE_CODE(0x5308, "Element status unknown")
568SENSE_CODE(0x5309, "Data transfer device error - load failed")
569SENSE_CODE(0x530a, "Data transfer device error - unload failed")
570SENSE_CODE(0x530b, "Data transfer device error - unload missing")
571SENSE_CODE(0x530c, "Data transfer device error - eject failed")
572SENSE_CODE(0x530d, "Data transfer device error - library communication failed")
573
574SENSE_CODE(0x5400, "Scsi to host system interface failure")
575
576SENSE_CODE(0x5500, "System resource failure")
577SENSE_CODE(0x5501, "System buffer full")
578SENSE_CODE(0x5502, "Insufficient reservation resources")
579SENSE_CODE(0x5503, "Insufficient resources")
580SENSE_CODE(0x5504, "Insufficient registration resources")
581SENSE_CODE(0x5505, "Insufficient access control resources")
582SENSE_CODE(0x5506, "Auxiliary memory out of space")
583SENSE_CODE(0x5507, "Quota error")
584SENSE_CODE(0x5508, "Maximum number of supplemental decryption keys exceeded")
585SENSE_CODE(0x5509, "Medium auxiliary memory not accessible")
586SENSE_CODE(0x550A, "Data currently unavailable")
587SENSE_CODE(0x550B, "Insufficient power for operation")
588SENSE_CODE(0x550C, "Insufficient resources to create rod")
589SENSE_CODE(0x550D, "Insufficient resources to create rod token")
590SENSE_CODE(0x550E, "Insufficient zone resources")
591
592SENSE_CODE(0x5700, "Unable to recover table-of-contents")
593
594SENSE_CODE(0x5800, "Generation does not exist")
595
596SENSE_CODE(0x5900, "Updated block read")
597
598SENSE_CODE(0x5A00, "Operator request or state change input")
599SENSE_CODE(0x5A01, "Operator medium removal request")
600SENSE_CODE(0x5A02, "Operator selected write protect")
601SENSE_CODE(0x5A03, "Operator selected write permit")
602
603SENSE_CODE(0x5B00, "Log exception")
604SENSE_CODE(0x5B01, "Threshold condition met")
605SENSE_CODE(0x5B02, "Log counter at maximum")
606SENSE_CODE(0x5B03, "Log list codes exhausted")
607
608SENSE_CODE(0x5C00, "Rpl status change")
609SENSE_CODE(0x5C01, "Spindles synchronized")
610SENSE_CODE(0x5C02, "Spindles not synchronized")
611
612SENSE_CODE(0x5D00, "Failure prediction threshold exceeded")
613SENSE_CODE(0x5D01, "Media failure prediction threshold exceeded")
614SENSE_CODE(0x5D02, "Logical unit failure prediction threshold exceeded")
615SENSE_CODE(0x5D03, "Spare area exhaustion prediction threshold exceeded")
616SENSE_CODE(0x5D10, "Hardware impending failure general hard drive failure")
617SENSE_CODE(0x5D11, "Hardware impending failure drive error rate too high")
618SENSE_CODE(0x5D12, "Hardware impending failure data error rate too high")
619SENSE_CODE(0x5D13, "Hardware impending failure seek error rate too high")
620SENSE_CODE(0x5D14, "Hardware impending failure too many block reassigns")
621SENSE_CODE(0x5D15, "Hardware impending failure access times too high")
622SENSE_CODE(0x5D16, "Hardware impending failure start unit times too high")
623SENSE_CODE(0x5D17, "Hardware impending failure channel parametrics")
624SENSE_CODE(0x5D18, "Hardware impending failure controller detected")
625SENSE_CODE(0x5D19, "Hardware impending failure throughput performance")
626SENSE_CODE(0x5D1A, "Hardware impending failure seek time performance")
627SENSE_CODE(0x5D1B, "Hardware impending failure spin-up retry count")
628SENSE_CODE(0x5D1C, "Hardware impending failure drive calibration retry count")
629SENSE_CODE(0x5D20, "Controller impending failure general hard drive failure")
630SENSE_CODE(0x5D21, "Controller impending failure drive error rate too high")
631SENSE_CODE(0x5D22, "Controller impending failure data error rate too high")
632SENSE_CODE(0x5D23, "Controller impending failure seek error rate too high")
633SENSE_CODE(0x5D24, "Controller impending failure too many block reassigns")
634SENSE_CODE(0x5D25, "Controller impending failure access times too high")
635SENSE_CODE(0x5D26, "Controller impending failure start unit times too high")
636SENSE_CODE(0x5D27, "Controller impending failure channel parametrics")
637SENSE_CODE(0x5D28, "Controller impending failure controller detected")
638SENSE_CODE(0x5D29, "Controller impending failure throughput performance")
639SENSE_CODE(0x5D2A, "Controller impending failure seek time performance")
640SENSE_CODE(0x5D2B, "Controller impending failure spin-up retry count")
641SENSE_CODE(0x5D2C, "Controller impending failure drive calibration retry count")
642SENSE_CODE(0x5D30, "Data channel impending failure general hard drive failure")
643SENSE_CODE(0x5D31, "Data channel impending failure drive error rate too high")
644SENSE_CODE(0x5D32, "Data channel impending failure data error rate too high")
645SENSE_CODE(0x5D33, "Data channel impending failure seek error rate too high")
646SENSE_CODE(0x5D34, "Data channel impending failure too many block reassigns")
647SENSE_CODE(0x5D35, "Data channel impending failure access times too high")
648SENSE_CODE(0x5D36, "Data channel impending failure start unit times too high")
649SENSE_CODE(0x5D37, "Data channel impending failure channel parametrics")
650SENSE_CODE(0x5D38, "Data channel impending failure controller detected")
651SENSE_CODE(0x5D39, "Data channel impending failure throughput performance")
652SENSE_CODE(0x5D3A, "Data channel impending failure seek time performance")
653SENSE_CODE(0x5D3B, "Data channel impending failure spin-up retry count")
654SENSE_CODE(0x5D3C, "Data channel impending failure drive calibration retry count")
655SENSE_CODE(0x5D40, "Servo impending failure general hard drive failure")
656SENSE_CODE(0x5D41, "Servo impending failure drive error rate too high")
657SENSE_CODE(0x5D42, "Servo impending failure data error rate too high")
658SENSE_CODE(0x5D43, "Servo impending failure seek error rate too high")
659SENSE_CODE(0x5D44, "Servo impending failure too many block reassigns")
660SENSE_CODE(0x5D45, "Servo impending failure access times too high")
661SENSE_CODE(0x5D46, "Servo impending failure start unit times too high")
662SENSE_CODE(0x5D47, "Servo impending failure channel parametrics")
663SENSE_CODE(0x5D48, "Servo impending failure controller detected")
664SENSE_CODE(0x5D49, "Servo impending failure throughput performance")
665SENSE_CODE(0x5D4A, "Servo impending failure seek time performance")
666SENSE_CODE(0x5D4B, "Servo impending failure spin-up retry count")
667SENSE_CODE(0x5D4C, "Servo impending failure drive calibration retry count")
668SENSE_CODE(0x5D50, "Spindle impending failure general hard drive failure")
669SENSE_CODE(0x5D51, "Spindle impending failure drive error rate too high")
670SENSE_CODE(0x5D52, "Spindle impending failure data error rate too high")
671SENSE_CODE(0x5D53, "Spindle impending failure seek error rate too high")
672SENSE_CODE(0x5D54, "Spindle impending failure too many block reassigns")
673SENSE_CODE(0x5D55, "Spindle impending failure access times too high")
674SENSE_CODE(0x5D56, "Spindle impending failure start unit times too high")
675SENSE_CODE(0x5D57, "Spindle impending failure channel parametrics")
676SENSE_CODE(0x5D58, "Spindle impending failure controller detected")
677SENSE_CODE(0x5D59, "Spindle impending failure throughput performance")
678SENSE_CODE(0x5D5A, "Spindle impending failure seek time performance")
679SENSE_CODE(0x5D5B, "Spindle impending failure spin-up retry count")
680SENSE_CODE(0x5D5C, "Spindle impending failure drive calibration retry count")
681SENSE_CODE(0x5D60, "Firmware impending failure general hard drive failure")
682SENSE_CODE(0x5D61, "Firmware impending failure drive error rate too high")
683SENSE_CODE(0x5D62, "Firmware impending failure data error rate too high")
684SENSE_CODE(0x5D63, "Firmware impending failure seek error rate too high")
685SENSE_CODE(0x5D64, "Firmware impending failure too many block reassigns")
686SENSE_CODE(0x5D65, "Firmware impending failure access times too high")
687SENSE_CODE(0x5D66, "Firmware impending failure start unit times too high")
688SENSE_CODE(0x5D67, "Firmware impending failure channel parametrics")
689SENSE_CODE(0x5D68, "Firmware impending failure controller detected")
690SENSE_CODE(0x5D69, "Firmware impending failure throughput performance")
691SENSE_CODE(0x5D6A, "Firmware impending failure seek time performance")
692SENSE_CODE(0x5D6B, "Firmware impending failure spin-up retry count")
693SENSE_CODE(0x5D6C, "Firmware impending failure drive calibration retry count")
694SENSE_CODE(0x5DFF, "Failure prediction threshold exceeded (false)")
695
696SENSE_CODE(0x5E00, "Low power condition on")
697SENSE_CODE(0x5E01, "Idle condition activated by timer")
698SENSE_CODE(0x5E02, "Standby condition activated by timer")
699SENSE_CODE(0x5E03, "Idle condition activated by command")
700SENSE_CODE(0x5E04, "Standby condition activated by command")
701SENSE_CODE(0x5E05, "Idle_b condition activated by timer")
702SENSE_CODE(0x5E06, "Idle_b condition activated by command")
703SENSE_CODE(0x5E07, "Idle_c condition activated by timer")
704SENSE_CODE(0x5E08, "Idle_c condition activated by command")
705SENSE_CODE(0x5E09, "Standby_y condition activated by timer")
706SENSE_CODE(0x5E0A, "Standby_y condition activated by command")
707SENSE_CODE(0x5E41, "Power state change to active")
708SENSE_CODE(0x5E42, "Power state change to idle")
709SENSE_CODE(0x5E43, "Power state change to standby")
710SENSE_CODE(0x5E45, "Power state change to sleep")
711SENSE_CODE(0x5E47, "Power state change to device control")
712
713SENSE_CODE(0x6000, "Lamp failure")
714
715SENSE_CODE(0x6100, "Video acquisition error")
716SENSE_CODE(0x6101, "Unable to acquire video")
717SENSE_CODE(0x6102, "Out of focus")
718
719SENSE_CODE(0x6200, "Scan head positioning error")
720
721SENSE_CODE(0x6300, "End of user area encountered on this track")
722SENSE_CODE(0x6301, "Packet does not fit in available space")
723
724SENSE_CODE(0x6400, "Illegal mode for this track")
725SENSE_CODE(0x6401, "Invalid packet size")
726
727SENSE_CODE(0x6500, "Voltage fault")
728
729SENSE_CODE(0x6600, "Automatic document feeder cover up")
730SENSE_CODE(0x6601, "Automatic document feeder lift up")
731SENSE_CODE(0x6602, "Document jam in automatic document feeder")
732SENSE_CODE(0x6603, "Document miss feed automatic in document feeder")
733
734SENSE_CODE(0x6700, "Configuration failure")
735SENSE_CODE(0x6701, "Configuration of incapable logical units failed")
736SENSE_CODE(0x6702, "Add logical unit failed")
737SENSE_CODE(0x6703, "Modification of logical unit failed")
738SENSE_CODE(0x6704, "Exchange of logical unit failed")
739SENSE_CODE(0x6705, "Remove of logical unit failed")
740SENSE_CODE(0x6706, "Attachment of logical unit failed")
741SENSE_CODE(0x6707, "Creation of logical unit failed")
742SENSE_CODE(0x6708, "Assign failure occurred")
743SENSE_CODE(0x6709, "Multiply assigned logical unit")
744SENSE_CODE(0x670A, "Set target port groups command failed")
745SENSE_CODE(0x670B, "ATA device feature not enabled")
746
747SENSE_CODE(0x6800, "Logical unit not configured")
748SENSE_CODE(0x6801, "Subsidiary logical unit not configured")
749
750SENSE_CODE(0x6900, "Data loss on logical unit")
751SENSE_CODE(0x6901, "Multiple logical unit failures")
752SENSE_CODE(0x6902, "Parity/data mismatch")
753
754SENSE_CODE(0x6A00, "Informational, refer to log")
755
756SENSE_CODE(0x6B00, "State change has occurred")
757SENSE_CODE(0x6B01, "Redundancy level got better")
758SENSE_CODE(0x6B02, "Redundancy level got worse")
759
760SENSE_CODE(0x6C00, "Rebuild failure occurred")
761
762SENSE_CODE(0x6D00, "Recalculate failure occurred")
763
764SENSE_CODE(0x6E00, "Command to logical unit failed")
765
766SENSE_CODE(0x6F00, "Copy protection key exchange failure - authentication failure")
767SENSE_CODE(0x6F01, "Copy protection key exchange failure - key not present")
768SENSE_CODE(0x6F02, "Copy protection key exchange failure - key not established")
769SENSE_CODE(0x6F03, "Read of scrambled sector without authentication")
770SENSE_CODE(0x6F04, "Media region code is mismatched to logical unit region")
771SENSE_CODE(0x6F05, "Drive region must be permanent/region reset count error")
772SENSE_CODE(0x6F06, "Insufficient block count for binding nonce recording")
773SENSE_CODE(0x6F07, "Conflict in binding nonce recording")
774/*
775 * SENSE_CODE(0x70NN, "Decompression exception short algorithm id of nn")
776 */
777SENSE_CODE(0x7100, "Decompression exception long algorithm id")
778
779SENSE_CODE(0x7200, "Session fixation error")
780SENSE_CODE(0x7201, "Session fixation error writing lead-in")
781SENSE_CODE(0x7202, "Session fixation error writing lead-out")
782SENSE_CODE(0x7203, "Session fixation error - incomplete track in session")
783SENSE_CODE(0x7204, "Empty or partially written reserved track")
784SENSE_CODE(0x7205, "No more track reservations allowed")
785SENSE_CODE(0x7206, "RMZ extension is not allowed")
786SENSE_CODE(0x7207, "No more test zone extensions are allowed")
787
788SENSE_CODE(0x7300, "Cd control error")
789SENSE_CODE(0x7301, "Power calibration area almost full")
790SENSE_CODE(0x7302, "Power calibration area is full")
791SENSE_CODE(0x7303, "Power calibration area error")
792SENSE_CODE(0x7304, "Program memory area update failure")
793SENSE_CODE(0x7305, "Program memory area is full")
794SENSE_CODE(0x7306, "RMA/PMA is almost full")
795SENSE_CODE(0x7310, "Current power calibration area almost full")
796SENSE_CODE(0x7311, "Current power calibration area is full")
797SENSE_CODE(0x7317, "RDZ is full")
798
799SENSE_CODE(0x7400, "Security error")
800SENSE_CODE(0x7401, "Unable to decrypt data")
801SENSE_CODE(0x7402, "Unencrypted data encountered while decrypting")
802SENSE_CODE(0x7403, "Incorrect data encryption key")
803SENSE_CODE(0x7404, "Cryptographic integrity validation failed")
804SENSE_CODE(0x7405, "Error decrypting data")
805SENSE_CODE(0x7406, "Unknown signature verification key")
806SENSE_CODE(0x7407, "Encryption parameters not useable")
807SENSE_CODE(0x7408, "Digital signature validation failure")
808SENSE_CODE(0x7409, "Encryption mode mismatch on read")
809SENSE_CODE(0x740A, "Encrypted block not raw read enabled")
810SENSE_CODE(0x740B, "Incorrect Encryption parameters")
811SENSE_CODE(0x740C, "Unable to decrypt parameter list")
812SENSE_CODE(0x740D, "Encryption algorithm disabled")
813SENSE_CODE(0x7410, "SA creation parameter value invalid")
814SENSE_CODE(0x7411, "SA creation parameter value rejected")
815SENSE_CODE(0x7412, "Invalid SA usage")
816SENSE_CODE(0x7421, "Data Encryption configuration prevented")
817SENSE_CODE(0x7430, "SA creation parameter not supported")
818SENSE_CODE(0x7440, "Authentication failed")
819SENSE_CODE(0x7461, "External data encryption key manager access error")
820SENSE_CODE(0x7462, "External data encryption key manager error")
821SENSE_CODE(0x7463, "External data encryption key not found")
822SENSE_CODE(0x7464, "External data encryption request not authorized")
823SENSE_CODE(0x746E, "External data encryption control timeout")
824SENSE_CODE(0x746F, "External data encryption control error")
825SENSE_CODE(0x7471, "Logical unit access not authorized")
826SENSE_CODE(0x7479, "Security conflict in translated device")