Laxman Dewangan | 49a9ac2 | 2013-12-10 12:40:55 +0530 | [diff] [blame] | 1 | NVIDIA Tegra124 pinmux controller |
| 2 | |
| 3 | The Tegra124 pinctrl binding is very similar to the Tegra20 and Tegra30 |
| 4 | pinctrl binding, as described in nvidia,tegra20-pinmux.txt and |
| 5 | nvidia,tegra30-pinmux.txt. In fact, this document assumes that binding as |
| 6 | a baseline, and only documents the differences between the two bindings. |
| 7 | |
| 8 | Required properties: |
| 9 | - compatible: "nvidia,tegra124-pinmux" |
| 10 | - reg: Should contain a list of base address and size pairs for: |
| 11 | -- first entry - the drive strength and pad control registers. |
| 12 | -- second entry - the pinmux registers |
| 13 | |
| 14 | Tegra124 adds the following optional properties for pin configuration subnodes. |
| 15 | The macros for options are defined in the |
| 16 | include/dt-binding/pinctrl/pinctrl-tegra.h. |
| 17 | - nvidia,enable-input: Integer. Enable the pin's input path. |
| 18 | enable :TEGRA_PIN_ENABLE0 and |
| 19 | disable or output only: TEGRA_PIN_DISABLE. |
| 20 | - nvidia,open-drain: Integer. |
| 21 | enable: TEGRA_PIN_ENABLE. |
| 22 | disable: TEGRA_PIN_DISABLE. |
| 23 | - nvidia,lock: Integer. Lock the pin configuration against further changes |
| 24 | until reset. |
| 25 | enable: TEGRA_PIN_ENABLE. |
| 26 | disable: TEGRA_PIN_DISABLE. |
| 27 | - nvidia,io-reset: Integer. Reset the IO path. |
| 28 | enable: TEGRA_PIN_ENABLE. |
| 29 | disable: TEGRA_PIN_DISABLE. |
| 30 | - nvidia,rcv-sel: Integer. Select VIL/VIH receivers. |
| 31 | normal: TEGRA_PIN_DISABLE |
| 32 | high: TEGRA_PIN_ENABLE |
| 33 | |
| 34 | Please refer the Tegra TRM for complete details regarding which groups |
| 35 | support which functionality. |
| 36 | |
| 37 | Valid values for pin and group names are: |
| 38 | |
| 39 | per-pin mux groups: |
| 40 | |
| 41 | These all support nvidia,function, nvidia,tristate, nvidia,pull, |
| 42 | nvidia,enable-input. Some support nvidia,lock nvidia,open-drain, |
| 43 | nvidia,io-reset and nvidia,rcv-sel. |
| 44 | |
| 45 | ulpi_data0_po1, ulpi_data1_po2, ulpi_data2_po3, ulpi_data3_po4, |
| 46 | ulpi_data4_po5, ulpi_data5_po6, ulpi_data6_po7, ulpi_data7_po0, |
| 47 | ulpi_clk_py0, ulpi_dir_py1, ulpi_nxt_py2, ulpi_stp_py3, dap3_fs_pp0, |
| 48 | dap3_din_pp1, dap3_dout_pp2, dap3_sclk_pp3, pv0, pv1, sdmmc1_clk_pz0, |
| 49 | sdmmc1_cmd_pz1, sdmmc1_dat3_py4, sdmmc1_dat2_py5, sdmmc1_dat1_py6, |
| 50 | sdmmc1_dat0_py7, clk2_out_pw5, clk2_req_pcc5, hdmi_int_pn7, ddc_scl_pv4, |
| 51 | ddc_sda_pv5, uart2_rxd_pc3, uart2_txd_pc2, uart2_rts_n_pj6, |
| 52 | uart2_cts_n_pj5, uart3_txd_pw6, uart3_rxd_pw7, uart3_cts_n_pa1, |
| 53 | uart3_rts_n_pc0, pu0, pu1, pu2, pu3, pu4, pu5, pu6, gen1_i2c_scl_pc4, |
| 54 | gen1_i2c_sda_pc5, dap4_fs_pp4, dap4_din_pp5, dap4_dout_pp6, |
| 55 | dap4_sclk_pp7, clk3_out_pee0, clk3_req_pee1, pc7, pi5, pi7, pk0, pk1, |
| 56 | pj0, pj2, pk3, pk4, pk2, pi3, pi6, pg0, pg1, pg2, pg3, pg4, pg5, pg6, |
| 57 | pg7, ph0, ph1, ph2, ph3, ph4, ph5, ph6, ph7, pj7, pb0, pb1, pk7, pi0, |
| 58 | pi1, pi2, pi4, gen2_i2c_scl_pt5, gen2_i2c_sda_pt6, sdmmc4_clk_pcc4, |
| 59 | sdmmc4_cmd_pt7, sdmmc4_dat0_paa0, sdmmc4_dat1_paa1, sdmmc4_dat2_paa2, |
| 60 | sdmmc4_dat3_paa3, sdmmc4_dat4_paa4, sdmmc4_dat5_paa5, sdmmc4_dat6_paa6, |
| 61 | sdmmc4_dat7_paa7, cam_mclk_pcc0, pcc1, pbb0, cam_i2c_scl_pbb1, |
| 62 | cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6, pbb7, pcc2, jtag_rtck, |
| 63 | pwr_i2c_scl_pz6, pwr_i2c_sda_pz7, kb_row0_pr0, kb_row1_pr1, kb_row2_pr2, |
| 64 | kb_row3_pr3, kb_row4_pr4, kb_row5_pr5, kb_row6_pr6, kb_row7_pr7, |
| 65 | kb_row8_ps0, kb_row9_ps1, kb_row10_ps2, kb_row11_ps3, kb_row12_ps4, |
| 66 | kb_row13_ps5, kb_row14_ps6, kb_row15_ps7, kb_col0_pq0, kb_col1_pq1, |
| 67 | kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5, kb_col6_pq6, |
| 68 | kb_col7_pq7, clk_32k_out_pa0, core_pwr_req, cpu_pwr_req, pwr_int_n, |
| 69 | clk_32k_in, owr, dap1_fs_pn0, dap1_din_pn1, dap1_dout_pn2, |
| 70 | dap1_sclk_pn3, dap_mclk1_req_pee2, dap_mclk1_pw4, spdif_in_pk6, |
| 71 | spdif_out_pk5, dap2_fs_pa2, dap2_din_pa4, dap2_dout_pa5, dap2_sclk_pa3, |
| 72 | dvfs_pwm_px0, gpio_x1_aud_px1, gpio_x3_aud_px3, dvfs_clk_px2, |
| 73 | gpio_x4_aud_px4, gpio_x5_aud_px5, gpio_x6_aud_px6, gpio_x7_aud_px7, |
| 74 | sdmmc3_clk_pa6, sdmmc3_cmd_pa7, sdmmc3_dat0_pb7, sdmmc3_dat1_pb6, |
| 75 | sdmmc3_dat2_pb5, sdmmc3_dat3_pb4, pex_l0_rst_n_pdd1, |
| 76 | pex_l0_clkreq_n_pdd2, pex_wake_n_pdd3, pex_l1_rst_n_pdd5, |
| 77 | pex_l1_clkreq_n_pdd6, hdmi_cec_pee3, sdmmc1_wp_n_pv3, |
| 78 | sdmmc3_cd_n_pv2, gpio_w2_aud_pw2, gpio_w3_aud_pw3, usb_vbus_en0_pn4, |
| 79 | usb_vbus_en1_pn5, sdmmc3_clk_lb_out_pee4, sdmmc3_clk_lb_in_pee5, |
| 80 | gmi_clk_lb, reset_out_n, kb_row16_pt0, kb_row17_pt1, usb_vbus_en2_pff1, |
| 81 | pff2, dp_hpd_pff0, |
| 82 | |
| 83 | drive groups: |
| 84 | |
| 85 | These all support nvidia,pull-down-strength, nvidia,pull-up-strength, |
| 86 | nvidia,slew-rate-rising, nvidia,slew-rate-falling. Most but not all |
| 87 | support nvidia,high-speed-mode, nvidia,schmitt, nvidia,low-power-mode |
| 88 | and nvidia,drive-type. |
| 89 | |
| 90 | ao1, ao2, at1, at2, at3, at4, at5, cdev1, cdev2, dap1, dap2, dap3, dap4, |
| 91 | dbg, sdio3, spi, uaa, uab, uart2, uart3, sdio1, ddc, gma, gme, gmf, gmg, |
| 92 | gmh, owr, uda, gpv, dev3, cec, usb_vbus_en, ao3, ao0, hv0, sdio4, ao4. |
| 93 | |
| 94 | Valid values for nvidia,functions are: |
| 95 | |
| 96 | blink, cec, cldvfs, clk12, cpu, dap, dap1, dap2, dev3, displaya, |
| 97 | displaya_alt, displayb, dtv, extperiph1, extperiph2, extperiph3, |
| 98 | gmi, gmi_alt, hda, hsi, i2c1, i2c2, i2c3, i2c4, i2cpwr, i2s0, |
| 99 | i2s1, i2s2, i2s3, i2s4, irda, kbc, owr, pmi, pwm0, pwm1, pwm2, pwm3, |
| 100 | pwron, reset_out_n, rsvd1, rsvd2, rsvd3, rsvd4, sdmmc1, sdmmc2, sdmmc3, |
| 101 | sdmmc4, soc, spdif, spi1, spi2, spi3, spi4, spi5, spi6, trace, uarta, |
| 102 | uartb, uartc, uartd, ulpi, usb, vgp1, vgp2, vgp3, vgp4, vgp5, vgp6, |
| 103 | vi, vi_alt1, vi_alt3, vimclk2, vimclk2_alt, sata, ccla, pe0, pe, pe1, |
| 104 | dp, rtck, sys, clk tmds. |
| 105 | |
| 106 | Example: |
| 107 | |
| 108 | pinmux: pinmux { |
| 109 | compatible = "nvidia,tegra124-pinmux"; |
| 110 | reg = <0x70000868 0x164 /* Pad control registers */ |
| 111 | 0x70003000 0x434>; /* PinMux registers */ |
| 112 | }; |
| 113 | |
| 114 | Example pinmux entries: |
| 115 | |
| 116 | pinctrl { |
| 117 | sdmmc4_default: pinmux { |
| 118 | sdmmc4_clk_pcc4 { |
| 119 | nvidia,pins = "sdmmc4_clk_pcc4", |
| 120 | nvidia,function = "sdmmc4"; |
| 121 | nvidia,pull = <TEGRA_PIN_PULL_NONE>; |
| 122 | nvidia,tristate = <TEGRA_PIN_DISABLE>; |
| 123 | }; |
| 124 | |
| 125 | sdmmc4_dat0_paa0 { |
| 126 | nvidia,pins = "sdmmc4_dat0_paa0", |
| 127 | "sdmmc4_dat1_paa1", |
| 128 | "sdmmc4_dat2_paa2", |
| 129 | "sdmmc4_dat3_paa3", |
| 130 | "sdmmc4_dat4_paa4", |
| 131 | "sdmmc4_dat5_paa5", |
| 132 | "sdmmc4_dat6_paa6", |
| 133 | "sdmmc4_dat7_paa7"; |
| 134 | nvidia,function = "sdmmc4"; |
| 135 | nvidia,pull = <TEGRA_PIN_PULL_UP>; |
| 136 | nvidia,tristate = <TEGRA_PIN_DISABLE>; |
| 137 | }; |
| 138 | }; |
| 139 | }; |
| 140 | |
| 141 | sdhci@78000400 { |
| 142 | pinctrl-names = "default"; |
| 143 | pinctrl-0 = <&sdmmc4_default>; |
| 144 | }; |