blob: 21b9788d02439f268625f65b611f49ea97cfd450 [file] [log] [blame]
Felipe Balbi550a7372008-07-24 12:27:36 +03001/*
2 * MUSB OTG peripheral driver ep0 handling
3 *
4 * Copyright 2005 Mentor Graphics Corporation
5 * Copyright (C) 2005-2006 by Texas Instruments
6 * Copyright (C) 2006-2007 Nokia Corporation
Sergei Shtylyova5073b52009-03-27 12:52:43 -07007 * Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com>
Felipe Balbi550a7372008-07-24 12:27:36 +03008 *
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License
11 * version 2 as published by the Free Software Foundation.
12 *
13 * This program is distributed in the hope that it will be useful, but
14 * WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
16 * General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
21 * 02110-1301 USA
22 *
23 * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
24 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
25 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
26 * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
27 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
28 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
29 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
30 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
32 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 *
34 */
35
36#include <linux/kernel.h>
37#include <linux/list.h>
38#include <linux/timer.h>
39#include <linux/spinlock.h>
40#include <linux/init.h>
41#include <linux/device.h>
42#include <linux/interrupt.h>
43
44#include "musb_core.h"
45
46/* ep0 is always musb->endpoints[0].ep_in */
47#define next_ep0_request(musb) next_in_request(&(musb)->endpoints[0])
48
49/*
50 * locking note: we use only the controller lock, for simpler correctness.
51 * It's always held with IRQs blocked.
52 *
53 * It protects the ep0 request queue as well as ep0_state, not just the
54 * controller and indexed registers. And that lock stays held unless it
55 * needs to be dropped to allow reentering this driver ... like upcalls to
56 * the gadget driver, or adjusting endpoint halt status.
57 */
58
59static char *decode_ep0stage(u8 stage)
60{
61 switch (stage) {
Sergei Shtylyova5073b52009-03-27 12:52:43 -070062 case MUSB_EP0_STAGE_IDLE: return "idle";
63 case MUSB_EP0_STAGE_SETUP: return "setup";
Felipe Balbi550a7372008-07-24 12:27:36 +030064 case MUSB_EP0_STAGE_TX: return "in";
65 case MUSB_EP0_STAGE_RX: return "out";
66 case MUSB_EP0_STAGE_ACKWAIT: return "wait";
67 case MUSB_EP0_STAGE_STATUSIN: return "in/status";
68 case MUSB_EP0_STAGE_STATUSOUT: return "out/status";
69 default: return "?";
70 }
71}
72
73/* handle a standard GET_STATUS request
74 * Context: caller holds controller lock
75 */
76static int service_tx_status_request(
77 struct musb *musb,
78 const struct usb_ctrlrequest *ctrlrequest)
79{
80 void __iomem *mbase = musb->mregs;
81 int handled = 1;
82 u8 result[2], epnum = 0;
83 const u8 recip = ctrlrequest->bRequestType & USB_RECIP_MASK;
84
85 result[1] = 0;
86
87 switch (recip) {
88 case USB_RECIP_DEVICE:
89 result[0] = musb->is_self_powered << USB_DEVICE_SELF_POWERED;
90 result[0] |= musb->may_wakeup << USB_DEVICE_REMOTE_WAKEUP;
91#ifdef CONFIG_USB_MUSB_OTG
92 if (musb->g.is_otg) {
93 result[0] |= musb->g.b_hnp_enable
94 << USB_DEVICE_B_HNP_ENABLE;
95 result[0] |= musb->g.a_alt_hnp_support
96 << USB_DEVICE_A_ALT_HNP_SUPPORT;
97 result[0] |= musb->g.a_hnp_support
98 << USB_DEVICE_A_HNP_SUPPORT;
99 }
100#endif
101 break;
102
103 case USB_RECIP_INTERFACE:
104 result[0] = 0;
105 break;
106
107 case USB_RECIP_ENDPOINT: {
108 int is_in;
109 struct musb_ep *ep;
110 u16 tmp;
111 void __iomem *regs;
112
113 epnum = (u8) ctrlrequest->wIndex;
114 if (!epnum) {
115 result[0] = 0;
116 break;
117 }
118
119 is_in = epnum & USB_DIR_IN;
120 if (is_in) {
121 epnum &= 0x0f;
122 ep = &musb->endpoints[epnum].ep_in;
123 } else {
124 ep = &musb->endpoints[epnum].ep_out;
125 }
126 regs = musb->endpoints[epnum].regs;
127
128 if (epnum >= MUSB_C_NUM_EPS || !ep->desc) {
129 handled = -EINVAL;
130 break;
131 }
132
133 musb_ep_select(mbase, epnum);
134 if (is_in)
135 tmp = musb_readw(regs, MUSB_TXCSR)
136 & MUSB_TXCSR_P_SENDSTALL;
137 else
138 tmp = musb_readw(regs, MUSB_RXCSR)
139 & MUSB_RXCSR_P_SENDSTALL;
140 musb_ep_select(mbase, 0);
141
142 result[0] = tmp ? 1 : 0;
143 } break;
144
145 default:
146 /* class, vendor, etc ... delegate */
147 handled = 0;
148 break;
149 }
150
151 /* fill up the fifo; caller updates csr0 */
152 if (handled > 0) {
153 u16 len = le16_to_cpu(ctrlrequest->wLength);
154
155 if (len > 2)
156 len = 2;
157 musb_write_fifo(&musb->endpoints[0], len, result);
158 }
159
160 return handled;
161}
162
163/*
164 * handle a control-IN request, the end0 buffer contains the current request
165 * that is supposed to be a standard control request. Assumes the fifo to
166 * be at least 2 bytes long.
167 *
168 * @return 0 if the request was NOT HANDLED,
169 * < 0 when error
170 * > 0 when the request is processed
171 *
172 * Context: caller holds controller lock
173 */
174static int
175service_in_request(struct musb *musb, const struct usb_ctrlrequest *ctrlrequest)
176{
177 int handled = 0; /* not handled */
178
179 if ((ctrlrequest->bRequestType & USB_TYPE_MASK)
180 == USB_TYPE_STANDARD) {
181 switch (ctrlrequest->bRequest) {
182 case USB_REQ_GET_STATUS:
183 handled = service_tx_status_request(musb,
184 ctrlrequest);
185 break;
186
187 /* case USB_REQ_SYNC_FRAME: */
188
189 default:
190 break;
191 }
192 }
193 return handled;
194}
195
196/*
197 * Context: caller holds controller lock
198 */
199static void musb_g_ep0_giveback(struct musb *musb, struct usb_request *req)
200{
201 musb_g_giveback(&musb->endpoints[0].ep_in, req, 0);
Felipe Balbi550a7372008-07-24 12:27:36 +0300202}
203
204/*
205 * Tries to start B-device HNP negotiation if enabled via sysfs
206 */
207static inline void musb_try_b_hnp_enable(struct musb *musb)
208{
209 void __iomem *mbase = musb->mregs;
210 u8 devctl;
211
212 DBG(1, "HNP: Setting HR\n");
213 devctl = musb_readb(mbase, MUSB_DEVCTL);
214 musb_writeb(mbase, MUSB_DEVCTL, devctl | MUSB_DEVCTL_HR);
215}
216
217/*
218 * Handle all control requests with no DATA stage, including standard
219 * requests such as:
220 * USB_REQ_SET_CONFIGURATION, USB_REQ_SET_INTERFACE, unrecognized
221 * always delegated to the gadget driver
222 * USB_REQ_SET_ADDRESS, USB_REQ_CLEAR_FEATURE, USB_REQ_SET_FEATURE
223 * always handled here, except for class/vendor/... features
224 *
225 * Context: caller holds controller lock
226 */
227static int
228service_zero_data_request(struct musb *musb,
229 struct usb_ctrlrequest *ctrlrequest)
230__releases(musb->lock)
231__acquires(musb->lock)
232{
233 int handled = -EINVAL;
234 void __iomem *mbase = musb->mregs;
235 const u8 recip = ctrlrequest->bRequestType & USB_RECIP_MASK;
236
237 /* the gadget driver handles everything except what we MUST handle */
238 if ((ctrlrequest->bRequestType & USB_TYPE_MASK)
239 == USB_TYPE_STANDARD) {
240 switch (ctrlrequest->bRequest) {
241 case USB_REQ_SET_ADDRESS:
242 /* change it after the status stage */
243 musb->set_address = true;
244 musb->address = (u8) (ctrlrequest->wValue & 0x7f);
245 handled = 1;
246 break;
247
248 case USB_REQ_CLEAR_FEATURE:
249 switch (recip) {
250 case USB_RECIP_DEVICE:
251 if (ctrlrequest->wValue
252 != USB_DEVICE_REMOTE_WAKEUP)
253 break;
254 musb->may_wakeup = 0;
255 handled = 1;
256 break;
257 case USB_RECIP_INTERFACE:
258 break;
259 case USB_RECIP_ENDPOINT:{
Sergei Shtylyov46034dc2009-11-18 22:54:32 +0300260 const u8 epnum =
261 ctrlrequest->wIndex & 0x0f;
262 struct musb_ep *musb_ep;
263 struct musb_hw_ep *ep;
264 void __iomem *regs;
265 int is_in;
266 u16 csr;
Felipe Balbi550a7372008-07-24 12:27:36 +0300267
Sergei Shtylyov46034dc2009-11-18 22:54:32 +0300268 if (epnum == 0 || epnum >= MUSB_C_NUM_EPS ||
269 ctrlrequest->wValue != USB_ENDPOINT_HALT)
Felipe Balbi550a7372008-07-24 12:27:36 +0300270 break;
271
Sergei Shtylyov46034dc2009-11-18 22:54:32 +0300272 ep = musb->endpoints + epnum;
273 regs = ep->regs;
274 is_in = ctrlrequest->wIndex & USB_DIR_IN;
275 if (is_in)
276 musb_ep = &ep->ep_in;
Felipe Balbi550a7372008-07-24 12:27:36 +0300277 else
Sergei Shtylyov46034dc2009-11-18 22:54:32 +0300278 musb_ep = &ep->ep_out;
Felipe Balbi550a7372008-07-24 12:27:36 +0300279 if (!musb_ep->desc)
280 break;
281
Sergei Shtylyov47e97602009-11-18 22:51:51 +0300282 handled = 1;
283 /* Ignore request if endpoint is wedged */
284 if (musb_ep->wedged)
285 break;
286
Sergei Shtylyov46034dc2009-11-18 22:54:32 +0300287 musb_ep_select(mbase, epnum);
288 if (is_in) {
289 csr = musb_readw(regs, MUSB_TXCSR);
290 csr |= MUSB_TXCSR_CLRDATATOG |
291 MUSB_TXCSR_P_WZC_BITS;
292 csr &= ~(MUSB_TXCSR_P_SENDSTALL |
293 MUSB_TXCSR_P_SENTSTALL |
294 MUSB_TXCSR_TXPKTRDY);
295 musb_writew(regs, MUSB_TXCSR, csr);
296 } else {
297 csr = musb_readw(regs, MUSB_RXCSR);
298 csr |= MUSB_RXCSR_CLRDATATOG |
299 MUSB_RXCSR_P_WZC_BITS;
300 csr &= ~(MUSB_RXCSR_P_SENDSTALL |
301 MUSB_RXCSR_P_SENTSTALL);
302 musb_writew(regs, MUSB_RXCSR, csr);
303 }
Felipe Balbi550a7372008-07-24 12:27:36 +0300304
305 /* select ep0 again */
306 musb_ep_select(mbase, 0);
Felipe Balbi550a7372008-07-24 12:27:36 +0300307 } break;
308 default:
309 /* class, vendor, etc ... delegate */
310 handled = 0;
311 break;
312 }
313 break;
314
315 case USB_REQ_SET_FEATURE:
316 switch (recip) {
317 case USB_RECIP_DEVICE:
318 handled = 1;
319 switch (ctrlrequest->wValue) {
320 case USB_DEVICE_REMOTE_WAKEUP:
321 musb->may_wakeup = 1;
322 break;
323 case USB_DEVICE_TEST_MODE:
324 if (musb->g.speed != USB_SPEED_HIGH)
325 goto stall;
326 if (ctrlrequest->wIndex & 0xff)
327 goto stall;
328
329 switch (ctrlrequest->wIndex >> 8) {
330 case 1:
331 pr_debug("TEST_J\n");
332 /* TEST_J */
333 musb->test_mode_nr =
334 MUSB_TEST_J;
335 break;
336 case 2:
337 /* TEST_K */
338 pr_debug("TEST_K\n");
339 musb->test_mode_nr =
340 MUSB_TEST_K;
341 break;
342 case 3:
343 /* TEST_SE0_NAK */
344 pr_debug("TEST_SE0_NAK\n");
345 musb->test_mode_nr =
346 MUSB_TEST_SE0_NAK;
347 break;
348 case 4:
349 /* TEST_PACKET */
350 pr_debug("TEST_PACKET\n");
351 musb->test_mode_nr =
352 MUSB_TEST_PACKET;
353 break;
Felipe Balbica4b2532010-03-12 10:29:12 +0200354
355 case 0xc0:
356 /* TEST_FORCE_HS */
357 pr_debug("TEST_FORCE_HS\n");
358 musb->test_mode_nr =
359 MUSB_TEST_FORCE_HS;
360 break;
361 case 0xc1:
362 /* TEST_FORCE_FS */
363 pr_debug("TEST_FORCE_FS\n");
364 musb->test_mode_nr =
365 MUSB_TEST_FORCE_FS;
366 break;
367 case 0xc2:
368 /* TEST_FIFO_ACCESS */
369 pr_debug("TEST_FIFO_ACCESS\n");
370 musb->test_mode_nr =
371 MUSB_TEST_FIFO_ACCESS;
372 break;
373 case 0xc3:
374 /* TEST_FORCE_HOST */
375 pr_debug("TEST_FORCE_HOST\n");
376 musb->test_mode_nr =
377 MUSB_TEST_FORCE_HOST;
378 break;
Felipe Balbi550a7372008-07-24 12:27:36 +0300379 default:
380 goto stall;
381 }
382
383 /* enter test mode after irq */
384 if (handled > 0)
385 musb->test_mode = true;
386 break;
387#ifdef CONFIG_USB_MUSB_OTG
388 case USB_DEVICE_B_HNP_ENABLE:
389 if (!musb->g.is_otg)
390 goto stall;
391 musb->g.b_hnp_enable = 1;
392 musb_try_b_hnp_enable(musb);
393 break;
394 case USB_DEVICE_A_HNP_SUPPORT:
395 if (!musb->g.is_otg)
396 goto stall;
397 musb->g.a_hnp_support = 1;
398 break;
399 case USB_DEVICE_A_ALT_HNP_SUPPORT:
400 if (!musb->g.is_otg)
401 goto stall;
402 musb->g.a_alt_hnp_support = 1;
403 break;
404#endif
405stall:
406 default:
407 handled = -EINVAL;
408 break;
409 }
410 break;
411
412 case USB_RECIP_INTERFACE:
413 break;
414
415 case USB_RECIP_ENDPOINT:{
416 const u8 epnum =
417 ctrlrequest->wIndex & 0x0f;
418 struct musb_ep *musb_ep;
419 struct musb_hw_ep *ep;
420 void __iomem *regs;
421 int is_in;
422 u16 csr;
423
Sergei Shtylyov46034dc2009-11-18 22:54:32 +0300424 if (epnum == 0 || epnum >= MUSB_C_NUM_EPS ||
425 ctrlrequest->wValue != USB_ENDPOINT_HALT)
Felipe Balbi550a7372008-07-24 12:27:36 +0300426 break;
427
428 ep = musb->endpoints + epnum;
429 regs = ep->regs;
430 is_in = ctrlrequest->wIndex & USB_DIR_IN;
431 if (is_in)
432 musb_ep = &ep->ep_in;
433 else
434 musb_ep = &ep->ep_out;
435 if (!musb_ep->desc)
436 break;
437
438 musb_ep_select(mbase, epnum);
439 if (is_in) {
Sergei Shtylyov46034dc2009-11-18 22:54:32 +0300440 csr = musb_readw(regs, MUSB_TXCSR);
Felipe Balbi550a7372008-07-24 12:27:36 +0300441 if (csr & MUSB_TXCSR_FIFONOTEMPTY)
442 csr |= MUSB_TXCSR_FLUSHFIFO;
443 csr |= MUSB_TXCSR_P_SENDSTALL
444 | MUSB_TXCSR_CLRDATATOG
445 | MUSB_TXCSR_P_WZC_BITS;
Sergei Shtylyov46034dc2009-11-18 22:54:32 +0300446 musb_writew(regs, MUSB_TXCSR, csr);
Felipe Balbi550a7372008-07-24 12:27:36 +0300447 } else {
Sergei Shtylyov46034dc2009-11-18 22:54:32 +0300448 csr = musb_readw(regs, MUSB_RXCSR);
Felipe Balbi550a7372008-07-24 12:27:36 +0300449 csr |= MUSB_RXCSR_P_SENDSTALL
450 | MUSB_RXCSR_FLUSHFIFO
451 | MUSB_RXCSR_CLRDATATOG
Sergei Shtylyovf01b0172009-07-17 17:30:03 +0300452 | MUSB_RXCSR_P_WZC_BITS;
Sergei Shtylyov46034dc2009-11-18 22:54:32 +0300453 musb_writew(regs, MUSB_RXCSR, csr);
Felipe Balbi550a7372008-07-24 12:27:36 +0300454 }
455
456 /* select ep0 again */
457 musb_ep_select(mbase, 0);
458 handled = 1;
459 } break;
460
461 default:
462 /* class, vendor, etc ... delegate */
463 handled = 0;
464 break;
465 }
466 break;
467 default:
468 /* delegate SET_CONFIGURATION, etc */
469 handled = 0;
470 }
471 } else
472 handled = 0;
473 return handled;
474}
475
476/* we have an ep0out data packet
477 * Context: caller holds controller lock
478 */
479static void ep0_rxstate(struct musb *musb)
480{
481 void __iomem *regs = musb->control_ep->regs;
482 struct usb_request *req;
Bryan Wu64ca44a2008-09-11 11:53:22 +0300483 u16 count, csr;
Felipe Balbi550a7372008-07-24 12:27:36 +0300484
485 req = next_ep0_request(musb);
486
487 /* read packet and ack; or stall because of gadget driver bug:
488 * should have provided the rx buffer before setup() returned.
489 */
490 if (req) {
491 void *buf = req->buf + req->actual;
492 unsigned len = req->length - req->actual;
493
494 /* read the buffer */
Bryan Wu64ca44a2008-09-11 11:53:22 +0300495 count = musb_readb(regs, MUSB_COUNT0);
496 if (count > len) {
Felipe Balbi550a7372008-07-24 12:27:36 +0300497 req->status = -EOVERFLOW;
Bryan Wu64ca44a2008-09-11 11:53:22 +0300498 count = len;
Felipe Balbi550a7372008-07-24 12:27:36 +0300499 }
Bryan Wu64ca44a2008-09-11 11:53:22 +0300500 musb_read_fifo(&musb->endpoints[0], count, buf);
501 req->actual += count;
502 csr = MUSB_CSR0_P_SVDRXPKTRDY;
503 if (count < 64 || req->actual == req->length) {
Felipe Balbi550a7372008-07-24 12:27:36 +0300504 musb->ep0_state = MUSB_EP0_STAGE_STATUSIN;
Bryan Wu64ca44a2008-09-11 11:53:22 +0300505 csr |= MUSB_CSR0_P_DATAEND;
Felipe Balbi550a7372008-07-24 12:27:36 +0300506 } else
507 req = NULL;
508 } else
Bryan Wu64ca44a2008-09-11 11:53:22 +0300509 csr = MUSB_CSR0_P_SVDRXPKTRDY | MUSB_CSR0_P_SENDSTALL;
Felipe Balbi550a7372008-07-24 12:27:36 +0300510
511
512 /* Completion handler may choose to stall, e.g. because the
513 * message just received holds invalid data.
514 */
515 if (req) {
Bryan Wu64ca44a2008-09-11 11:53:22 +0300516 musb->ackpend = csr;
Felipe Balbi550a7372008-07-24 12:27:36 +0300517 musb_g_ep0_giveback(musb, req);
518 if (!musb->ackpend)
519 return;
520 musb->ackpend = 0;
521 }
Anand Gadiyarfb85d992008-08-21 20:21:00 +0530522 musb_ep_select(musb->mregs, 0);
Bryan Wu64ca44a2008-09-11 11:53:22 +0300523 musb_writew(regs, MUSB_CSR0, csr);
Felipe Balbi550a7372008-07-24 12:27:36 +0300524}
525
526/*
527 * transmitting to the host (IN), this code might be called from IRQ
528 * and from kernel thread.
529 *
530 * Context: caller holds controller lock
531 */
532static void ep0_txstate(struct musb *musb)
533{
534 void __iomem *regs = musb->control_ep->regs;
535 struct usb_request *request = next_ep0_request(musb);
536 u16 csr = MUSB_CSR0_TXPKTRDY;
537 u8 *fifo_src;
538 u8 fifo_count;
539
540 if (!request) {
541 /* WARN_ON(1); */
542 DBG(2, "odd; csr0 %04x\n", musb_readw(regs, MUSB_CSR0));
543 return;
544 }
545
546 /* load the data */
547 fifo_src = (u8 *) request->buf + request->actual;
548 fifo_count = min((unsigned) MUSB_EP0_FIFOSIZE,
549 request->length - request->actual);
550 musb_write_fifo(&musb->endpoints[0], fifo_count, fifo_src);
551 request->actual += fifo_count;
552
553 /* update the flags */
554 if (fifo_count < MUSB_MAX_END0_PACKET
Daniel Glöckner5542bc22009-11-17 15:22:56 +0530555 || (request->actual == request->length
556 && !request->zero)) {
Felipe Balbi550a7372008-07-24 12:27:36 +0300557 musb->ep0_state = MUSB_EP0_STAGE_STATUSOUT;
558 csr |= MUSB_CSR0_P_DATAEND;
559 } else
560 request = NULL;
561
562 /* report completions as soon as the fifo's loaded; there's no
563 * win in waiting till this last packet gets acked. (other than
564 * very precise fault reporting, needed by USB TMC; possible with
565 * this hardware, but not usable from portable gadget drivers.)
566 */
567 if (request) {
568 musb->ackpend = csr;
569 musb_g_ep0_giveback(musb, request);
570 if (!musb->ackpend)
571 return;
572 musb->ackpend = 0;
573 }
574
575 /* send it out, triggering a "txpktrdy cleared" irq */
Anand Gadiyarfb85d992008-08-21 20:21:00 +0530576 musb_ep_select(musb->mregs, 0);
Felipe Balbi550a7372008-07-24 12:27:36 +0300577 musb_writew(regs, MUSB_CSR0, csr);
578}
579
580/*
581 * Read a SETUP packet (struct usb_ctrlrequest) from the hardware.
582 * Fields are left in USB byte-order.
583 *
584 * Context: caller holds controller lock.
585 */
586static void
587musb_read_setup(struct musb *musb, struct usb_ctrlrequest *req)
588{
589 struct usb_request *r;
590 void __iomem *regs = musb->control_ep->regs;
591
592 musb_read_fifo(&musb->endpoints[0], sizeof *req, (u8 *)req);
593
594 /* NOTE: earlier 2.6 versions changed setup packets to host
595 * order, but now USB packets always stay in USB byte order.
596 */
597 DBG(3, "SETUP req%02x.%02x v%04x i%04x l%d\n",
598 req->bRequestType,
599 req->bRequest,
600 le16_to_cpu(req->wValue),
601 le16_to_cpu(req->wIndex),
602 le16_to_cpu(req->wLength));
603
604 /* clean up any leftover transfers */
605 r = next_ep0_request(musb);
606 if (r)
607 musb_g_ep0_giveback(musb, r);
608
609 /* For zero-data requests we want to delay the STATUS stage to
610 * avoid SETUPEND errors. If we read data (OUT), delay accepting
611 * packets until there's a buffer to store them in.
612 *
613 * If we write data, the controller acts happier if we enable
614 * the TX FIFO right away, and give the controller a moment
615 * to switch modes...
616 */
617 musb->set_address = false;
618 musb->ackpend = MUSB_CSR0_P_SVDRXPKTRDY;
619 if (req->wLength == 0) {
620 if (req->bRequestType & USB_DIR_IN)
621 musb->ackpend |= MUSB_CSR0_TXPKTRDY;
622 musb->ep0_state = MUSB_EP0_STAGE_ACKWAIT;
623 } else if (req->bRequestType & USB_DIR_IN) {
624 musb->ep0_state = MUSB_EP0_STAGE_TX;
625 musb_writew(regs, MUSB_CSR0, MUSB_CSR0_P_SVDRXPKTRDY);
626 while ((musb_readw(regs, MUSB_CSR0)
627 & MUSB_CSR0_RXPKTRDY) != 0)
628 cpu_relax();
629 musb->ackpend = 0;
630 } else
631 musb->ep0_state = MUSB_EP0_STAGE_RX;
632}
633
634static int
635forward_to_driver(struct musb *musb, const struct usb_ctrlrequest *ctrlrequest)
636__releases(musb->lock)
637__acquires(musb->lock)
638{
639 int retval;
640 if (!musb->gadget_driver)
641 return -EOPNOTSUPP;
642 spin_unlock(&musb->lock);
643 retval = musb->gadget_driver->setup(&musb->g, ctrlrequest);
644 spin_lock(&musb->lock);
645 return retval;
646}
647
648/*
649 * Handle peripheral ep0 interrupt
650 *
651 * Context: irq handler; we won't re-enter the driver that way.
652 */
653irqreturn_t musb_g_ep0_irq(struct musb *musb)
654{
655 u16 csr;
656 u16 len;
657 void __iomem *mbase = musb->mregs;
658 void __iomem *regs = musb->endpoints[0].regs;
659 irqreturn_t retval = IRQ_NONE;
660
661 musb_ep_select(mbase, 0); /* select ep0 */
662 csr = musb_readw(regs, MUSB_CSR0);
663 len = musb_readb(regs, MUSB_COUNT0);
664
665 DBG(4, "csr %04x, count %d, myaddr %d, ep0stage %s\n",
666 csr, len,
667 musb_readb(mbase, MUSB_FADDR),
668 decode_ep0stage(musb->ep0_state));
669
670 /* I sent a stall.. need to acknowledge it now.. */
671 if (csr & MUSB_CSR0_P_SENTSTALL) {
672 musb_writew(regs, MUSB_CSR0,
673 csr & ~MUSB_CSR0_P_SENTSTALL);
674 retval = IRQ_HANDLED;
Sergei Shtylyova5073b52009-03-27 12:52:43 -0700675 musb->ep0_state = MUSB_EP0_STAGE_IDLE;
Felipe Balbi550a7372008-07-24 12:27:36 +0300676 csr = musb_readw(regs, MUSB_CSR0);
677 }
678
679 /* request ended "early" */
680 if (csr & MUSB_CSR0_P_SETUPEND) {
681 musb_writew(regs, MUSB_CSR0, MUSB_CSR0_P_SVDSETUPEND);
682 retval = IRQ_HANDLED;
Sergei Shtylyova5073b52009-03-27 12:52:43 -0700683 /* Transition into the early status phase */
684 switch (musb->ep0_state) {
685 case MUSB_EP0_STAGE_TX:
686 musb->ep0_state = MUSB_EP0_STAGE_STATUSOUT;
687 break;
688 case MUSB_EP0_STAGE_RX:
689 musb->ep0_state = MUSB_EP0_STAGE_STATUSIN;
690 break;
691 default:
Sergei Shtylyov17be5c52009-12-15 13:30:01 +0200692 ERR("SetupEnd came in a wrong ep0stage %s\n",
Sergei Shtylyova5073b52009-03-27 12:52:43 -0700693 decode_ep0stage(musb->ep0_state));
694 }
Felipe Balbi550a7372008-07-24 12:27:36 +0300695 csr = musb_readw(regs, MUSB_CSR0);
696 /* NOTE: request may need completion */
697 }
698
699 /* docs from Mentor only describe tx, rx, and idle/setup states.
700 * we need to handle nuances around status stages, and also the
701 * case where status and setup stages come back-to-back ...
702 */
703 switch (musb->ep0_state) {
704
705 case MUSB_EP0_STAGE_TX:
706 /* irq on clearing txpktrdy */
707 if ((csr & MUSB_CSR0_TXPKTRDY) == 0) {
708 ep0_txstate(musb);
709 retval = IRQ_HANDLED;
710 }
711 break;
712
713 case MUSB_EP0_STAGE_RX:
714 /* irq on set rxpktrdy */
715 if (csr & MUSB_CSR0_RXPKTRDY) {
716 ep0_rxstate(musb);
717 retval = IRQ_HANDLED;
718 }
719 break;
720
721 case MUSB_EP0_STAGE_STATUSIN:
722 /* end of sequence #2 (OUT/RX state) or #3 (no data) */
723
724 /* update address (if needed) only @ the end of the
725 * status phase per usb spec, which also guarantees
726 * we get 10 msec to receive this irq... until this
727 * is done we won't see the next packet.
728 */
729 if (musb->set_address) {
730 musb->set_address = false;
731 musb_writeb(mbase, MUSB_FADDR, musb->address);
732 }
733
734 /* enter test mode if needed (exit by reset) */
735 else if (musb->test_mode) {
736 DBG(1, "entering TESTMODE\n");
737
738 if (MUSB_TEST_PACKET == musb->test_mode_nr)
739 musb_load_testpacket(musb);
740
741 musb_writeb(mbase, MUSB_TESTMODE,
742 musb->test_mode_nr);
743 }
744 /* FALLTHROUGH */
745
746 case MUSB_EP0_STAGE_STATUSOUT:
747 /* end of sequence #1: write to host (TX state) */
748 {
749 struct usb_request *req;
750
751 req = next_ep0_request(musb);
752 if (req)
753 musb_g_ep0_giveback(musb, req);
754 }
Sergei Shtylyova5073b52009-03-27 12:52:43 -0700755
756 /*
757 * In case when several interrupts can get coalesced,
758 * check to see if we've already received a SETUP packet...
759 */
760 if (csr & MUSB_CSR0_RXPKTRDY)
761 goto setup;
762
763 retval = IRQ_HANDLED;
764 musb->ep0_state = MUSB_EP0_STAGE_IDLE;
765 break;
766
767 case MUSB_EP0_STAGE_IDLE:
768 /*
769 * This state is typically (but not always) indiscernible
770 * from the status states since the corresponding interrupts
771 * tend to happen within too little period of time (with only
772 * a zero-length packet in between) and so get coalesced...
773 */
Felipe Balbi550a7372008-07-24 12:27:36 +0300774 retval = IRQ_HANDLED;
775 musb->ep0_state = MUSB_EP0_STAGE_SETUP;
776 /* FALLTHROUGH */
777
778 case MUSB_EP0_STAGE_SETUP:
Sergei Shtylyova5073b52009-03-27 12:52:43 -0700779setup:
Felipe Balbi550a7372008-07-24 12:27:36 +0300780 if (csr & MUSB_CSR0_RXPKTRDY) {
781 struct usb_ctrlrequest setup;
782 int handled = 0;
783
784 if (len != 8) {
785 ERR("SETUP packet len %d != 8 ?\n", len);
786 break;
787 }
788 musb_read_setup(musb, &setup);
789 retval = IRQ_HANDLED;
790
791 /* sometimes the RESET won't be reported */
792 if (unlikely(musb->g.speed == USB_SPEED_UNKNOWN)) {
793 u8 power;
794
795 printk(KERN_NOTICE "%s: peripheral reset "
796 "irq lost!\n",
797 musb_driver_name);
798 power = musb_readb(mbase, MUSB_POWER);
799 musb->g.speed = (power & MUSB_POWER_HSMODE)
800 ? USB_SPEED_HIGH : USB_SPEED_FULL;
801
802 }
803
804 switch (musb->ep0_state) {
805
806 /* sequence #3 (no data stage), includes requests
807 * we can't forward (notably SET_ADDRESS and the
808 * device/endpoint feature set/clear operations)
809 * plus SET_CONFIGURATION and others we must
810 */
811 case MUSB_EP0_STAGE_ACKWAIT:
812 handled = service_zero_data_request(
813 musb, &setup);
814
Sergei Shtylyov17be5c52009-12-15 13:30:01 +0200815 /*
816 * We're expecting no data in any case, so
817 * always set the DATAEND bit -- doing this
818 * here helps avoid SetupEnd interrupt coming
819 * in the idle stage when we're stalling...
820 */
821 musb->ackpend |= MUSB_CSR0_P_DATAEND;
822
Felipe Balbi550a7372008-07-24 12:27:36 +0300823 /* status stage might be immediate */
Sergei Shtylyov17be5c52009-12-15 13:30:01 +0200824 if (handled > 0)
Felipe Balbi550a7372008-07-24 12:27:36 +0300825 musb->ep0_state =
826 MUSB_EP0_STAGE_STATUSIN;
Felipe Balbi550a7372008-07-24 12:27:36 +0300827 break;
828
829 /* sequence #1 (IN to host), includes GET_STATUS
830 * requests that we can't forward, GET_DESCRIPTOR
831 * and others that we must
832 */
833 case MUSB_EP0_STAGE_TX:
834 handled = service_in_request(musb, &setup);
835 if (handled > 0) {
836 musb->ackpend = MUSB_CSR0_TXPKTRDY
837 | MUSB_CSR0_P_DATAEND;
838 musb->ep0_state =
839 MUSB_EP0_STAGE_STATUSOUT;
840 }
841 break;
842
843 /* sequence #2 (OUT from host), always forward */
844 default: /* MUSB_EP0_STAGE_RX */
845 break;
846 }
847
848 DBG(3, "handled %d, csr %04x, ep0stage %s\n",
849 handled, csr,
850 decode_ep0stage(musb->ep0_state));
851
852 /* unless we need to delegate this to the gadget
853 * driver, we know how to wrap this up: csr0 has
854 * not yet been written.
855 */
856 if (handled < 0)
857 goto stall;
858 else if (handled > 0)
859 goto finish;
860
861 handled = forward_to_driver(musb, &setup);
862 if (handled < 0) {
863 musb_ep_select(mbase, 0);
864stall:
865 DBG(3, "stall (%d)\n", handled);
866 musb->ackpend |= MUSB_CSR0_P_SENDSTALL;
Sergei Shtylyova5073b52009-03-27 12:52:43 -0700867 musb->ep0_state = MUSB_EP0_STAGE_IDLE;
Felipe Balbi550a7372008-07-24 12:27:36 +0300868finish:
869 musb_writew(regs, MUSB_CSR0,
870 musb->ackpend);
871 musb->ackpend = 0;
872 }
873 }
874 break;
875
876 case MUSB_EP0_STAGE_ACKWAIT:
877 /* This should not happen. But happens with tusb6010 with
878 * g_file_storage and high speed. Do nothing.
879 */
880 retval = IRQ_HANDLED;
881 break;
882
883 default:
884 /* "can't happen" */
885 WARN_ON(1);
886 musb_writew(regs, MUSB_CSR0, MUSB_CSR0_P_SENDSTALL);
Sergei Shtylyova5073b52009-03-27 12:52:43 -0700887 musb->ep0_state = MUSB_EP0_STAGE_IDLE;
Felipe Balbi550a7372008-07-24 12:27:36 +0300888 break;
889 }
890
891 return retval;
892}
893
894
895static int
896musb_g_ep0_enable(struct usb_ep *ep, const struct usb_endpoint_descriptor *desc)
897{
898 /* always enabled */
899 return -EINVAL;
900}
901
902static int musb_g_ep0_disable(struct usb_ep *e)
903{
904 /* always enabled */
905 return -EINVAL;
906}
907
908static int
909musb_g_ep0_queue(struct usb_ep *e, struct usb_request *r, gfp_t gfp_flags)
910{
911 struct musb_ep *ep;
912 struct musb_request *req;
913 struct musb *musb;
914 int status;
915 unsigned long lockflags;
916 void __iomem *regs;
917
918 if (!e || !r)
919 return -EINVAL;
920
921 ep = to_musb_ep(e);
922 musb = ep->musb;
923 regs = musb->control_ep->regs;
924
925 req = to_musb_request(r);
926 req->musb = musb;
927 req->request.actual = 0;
928 req->request.status = -EINPROGRESS;
929 req->tx = ep->is_in;
930
931 spin_lock_irqsave(&musb->lock, lockflags);
932
933 if (!list_empty(&ep->req_list)) {
934 status = -EBUSY;
935 goto cleanup;
936 }
937
938 switch (musb->ep0_state) {
939 case MUSB_EP0_STAGE_RX: /* control-OUT data */
940 case MUSB_EP0_STAGE_TX: /* control-IN data */
941 case MUSB_EP0_STAGE_ACKWAIT: /* zero-length data */
942 status = 0;
943 break;
944 default:
945 DBG(1, "ep0 request queued in state %d\n",
946 musb->ep0_state);
947 status = -EINVAL;
948 goto cleanup;
949 }
950
951 /* add request to the list */
952 list_add_tail(&(req->request.list), &(ep->req_list));
953
954 DBG(3, "queue to %s (%s), length=%d\n",
955 ep->name, ep->is_in ? "IN/TX" : "OUT/RX",
956 req->request.length);
957
958 musb_ep_select(musb->mregs, 0);
959
960 /* sequence #1, IN ... start writing the data */
961 if (musb->ep0_state == MUSB_EP0_STAGE_TX)
962 ep0_txstate(musb);
963
964 /* sequence #3, no-data ... issue IN status */
965 else if (musb->ep0_state == MUSB_EP0_STAGE_ACKWAIT) {
966 if (req->request.length)
967 status = -EINVAL;
968 else {
969 musb->ep0_state = MUSB_EP0_STAGE_STATUSIN;
970 musb_writew(regs, MUSB_CSR0,
971 musb->ackpend | MUSB_CSR0_P_DATAEND);
972 musb->ackpend = 0;
973 musb_g_ep0_giveback(ep->musb, r);
974 }
975
976 /* else for sequence #2 (OUT), caller provides a buffer
977 * before the next packet arrives. deferred responses
978 * (after SETUP is acked) are racey.
979 */
980 } else if (musb->ackpend) {
981 musb_writew(regs, MUSB_CSR0, musb->ackpend);
982 musb->ackpend = 0;
983 }
984
985cleanup:
986 spin_unlock_irqrestore(&musb->lock, lockflags);
987 return status;
988}
989
990static int musb_g_ep0_dequeue(struct usb_ep *ep, struct usb_request *req)
991{
992 /* we just won't support this */
993 return -EINVAL;
994}
995
996static int musb_g_ep0_halt(struct usb_ep *e, int value)
997{
998 struct musb_ep *ep;
999 struct musb *musb;
1000 void __iomem *base, *regs;
1001 unsigned long flags;
1002 int status;
1003 u16 csr;
1004
1005 if (!e || !value)
1006 return -EINVAL;
1007
1008 ep = to_musb_ep(e);
1009 musb = ep->musb;
1010 base = musb->mregs;
1011 regs = musb->control_ep->regs;
1012 status = 0;
1013
1014 spin_lock_irqsave(&musb->lock, flags);
1015
1016 if (!list_empty(&ep->req_list)) {
1017 status = -EBUSY;
1018 goto cleanup;
1019 }
1020
1021 musb_ep_select(base, 0);
1022 csr = musb->ackpend;
1023
1024 switch (musb->ep0_state) {
1025
1026 /* Stalls are usually issued after parsing SETUP packet, either
1027 * directly in irq context from setup() or else later.
1028 */
1029 case MUSB_EP0_STAGE_TX: /* control-IN data */
1030 case MUSB_EP0_STAGE_ACKWAIT: /* STALL for zero-length data */
1031 case MUSB_EP0_STAGE_RX: /* control-OUT data */
1032 csr = musb_readw(regs, MUSB_CSR0);
1033 /* FALLTHROUGH */
1034
1035 /* It's also OK to issue stalls during callbacks when a non-empty
1036 * DATA stage buffer has been read (or even written).
1037 */
1038 case MUSB_EP0_STAGE_STATUSIN: /* control-OUT status */
1039 case MUSB_EP0_STAGE_STATUSOUT: /* control-IN status */
1040
1041 csr |= MUSB_CSR0_P_SENDSTALL;
1042 musb_writew(regs, MUSB_CSR0, csr);
Sergei Shtylyova5073b52009-03-27 12:52:43 -07001043 musb->ep0_state = MUSB_EP0_STAGE_IDLE;
Felipe Balbi550a7372008-07-24 12:27:36 +03001044 musb->ackpend = 0;
1045 break;
1046 default:
1047 DBG(1, "ep0 can't halt in state %d\n", musb->ep0_state);
1048 status = -EINVAL;
1049 }
1050
1051cleanup:
1052 spin_unlock_irqrestore(&musb->lock, flags);
1053 return status;
1054}
1055
1056const struct usb_ep_ops musb_g_ep0_ops = {
1057 .enable = musb_g_ep0_enable,
1058 .disable = musb_g_ep0_disable,
1059 .alloc_request = musb_alloc_request,
1060 .free_request = musb_free_request,
1061 .queue = musb_g_ep0_queue,
1062 .dequeue = musb_g_ep0_dequeue,
1063 .set_halt = musb_g_ep0_halt,
1064};