blob: d3830c45a369cd611ba99ff78bac235c5fc4e258 [file] [log] [blame]
Alek Du07ab85d2008-05-06 21:31:41 +08001/*
2 * pata_sch.c - Intel SCH PATA controllers
3 *
4 * Copyright (c) 2008 Alek Du <alek.du@intel.com>
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License 2 as published
8 * by the Free Software Foundation.
9 *
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
14 *
15 * You should have received a copy of the GNU General Public License
16 * along with this program; see the file COPYING. If not, write to
17 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
18 *
19 */
20
21/*
22 * Supports:
23 * Intel SCH (AF82US15W, AF82US15L, AF82UL11L) chipsets -- see spec at:
24 * http://download.intel.com/design/chipsets/embedded/datashts/319537.pdf
25 */
26
27#include <linux/kernel.h>
28#include <linux/module.h>
29#include <linux/pci.h>
30#include <linux/init.h>
31#include <linux/blkdev.h>
32#include <linux/delay.h>
33#include <linux/device.h>
34#include <scsi/scsi_host.h>
35#include <linux/libata.h>
36#include <linux/dmi.h>
37
38#define DRV_NAME "pata_sch"
39#define DRV_VERSION "0.2"
40
41/* see SCH datasheet page 351 */
42enum {
43 D0TIM = 0x80, /* Device 0 Timing Register */
44 D1TIM = 0x84, /* Device 1 Timing Register */
45 PM = 0x07, /* PIO Mode Bit Mask */
46 MDM = (0x03 << 8), /* Multi-word DMA Mode Bit Mask */
47 UDM = (0x07 << 16), /* Ultra DMA Mode Bit Mask */
48 PPE = (1 << 30), /* Prefetch/Post Enable */
49 USD = (1 << 31), /* Use Synchronous DMA */
50};
51
52static int sch_init_one(struct pci_dev *pdev,
53 const struct pci_device_id *ent);
54static void sch_set_piomode(struct ata_port *ap, struct ata_device *adev);
55static void sch_set_dmamode(struct ata_port *ap, struct ata_device *adev);
56
57static const struct pci_device_id sch_pci_tbl[] = {
58 /* Intel SCH PATA Controller */
59 { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_SCH_IDE), 0 },
60 { } /* terminate list */
61};
62
63static struct pci_driver sch_pci_driver = {
64 .name = DRV_NAME,
65 .id_table = sch_pci_tbl,
66 .probe = sch_init_one,
67 .remove = ata_pci_remove_one,
68#ifdef CONFIG_PM
69 .suspend = ata_pci_device_suspend,
70 .resume = ata_pci_device_resume,
71#endif
72};
73
74static struct scsi_host_template sch_sht = {
75 ATA_BMDMA_SHT(DRV_NAME),
76};
77
78static struct ata_port_operations sch_pata_ops = {
79 .inherits = &ata_bmdma_port_ops,
80 .cable_detect = ata_cable_unknown,
81 .set_piomode = sch_set_piomode,
82 .set_dmamode = sch_set_dmamode,
83};
84
85static struct ata_port_info sch_port_info = {
Mark Salterbc170e62008-11-06 08:03:23 -050086 .flags = ATA_FLAG_SLAVE_POSS,
Erik Inge Bolsø14bdef92009-03-14 21:38:24 +010087 .pio_mask = ATA_PIO4,
88 .mwdma_mask = ATA_MWDMA2,
89 .udma_mask = ATA_UDMA5,
Alek Du07ab85d2008-05-06 21:31:41 +080090 .port_ops = &sch_pata_ops,
91};
92
93MODULE_AUTHOR("Alek Du <alek.du@intel.com>");
94MODULE_DESCRIPTION("SCSI low-level driver for Intel SCH PATA controllers");
95MODULE_LICENSE("GPL");
96MODULE_DEVICE_TABLE(pci, sch_pci_tbl);
97MODULE_VERSION(DRV_VERSION);
98
99/**
100 * sch_set_piomode - Initialize host controller PATA PIO timings
101 * @ap: Port whose timings we are configuring
102 * @adev: ATA device
103 *
104 * Set PIO mode for device, in host controller PCI config space.
105 *
106 * LOCKING:
107 * None (inherited from caller).
108 */
109
110static void sch_set_piomode(struct ata_port *ap, struct ata_device *adev)
111{
112 unsigned int pio = adev->pio_mode - XFER_PIO_0;
113 struct pci_dev *dev = to_pci_dev(ap->host->dev);
114 unsigned int port = adev->devno ? D1TIM : D0TIM;
115 unsigned int data;
116
117 pci_read_config_dword(dev, port, &data);
118 /* see SCH datasheet page 351 */
119 /* set PIO mode */
120 data &= ~(PM | PPE);
121 data |= pio;
122 /* enable PPE for block device */
123 if (adev->class == ATA_DEV_ATA)
124 data |= PPE;
125 pci_write_config_dword(dev, port, data);
126}
127
128/**
129 * sch_set_dmamode - Initialize host controller PATA DMA timings
130 * @ap: Port whose timings we are configuring
131 * @adev: ATA device
132 *
133 * Set MW/UDMA mode for device, in host controller PCI config space.
134 *
135 * LOCKING:
136 * None (inherited from caller).
137 */
138
139static void sch_set_dmamode(struct ata_port *ap, struct ata_device *adev)
140{
141 unsigned int dma_mode = adev->dma_mode;
142 struct pci_dev *dev = to_pci_dev(ap->host->dev);
143 unsigned int port = adev->devno ? D1TIM : D0TIM;
144 unsigned int data;
145
146 pci_read_config_dword(dev, port, &data);
147 /* see SCH datasheet page 351 */
148 if (dma_mode >= XFER_UDMA_0) {
149 /* enable Synchronous DMA mode */
150 data |= USD;
151 data &= ~UDM;
152 data |= (dma_mode - XFER_UDMA_0) << 16;
153 } else { /* must be MWDMA mode, since we masked SWDMA already */
154 data &= ~(USD | MDM);
155 data |= (dma_mode - XFER_MW_DMA_0) << 8;
156 }
157 pci_write_config_dword(dev, port, data);
158}
159
160/**
161 * sch_init_one - Register SCH ATA PCI device with kernel services
162 * @pdev: PCI device to register
163 * @ent: Entry in sch_pci_tbl matching with @pdev
164 *
165 * LOCKING:
166 * Inherited from PCI layer (may sleep).
167 *
168 * RETURNS:
169 * Zero on success, or -ERRNO value.
170 */
171
Greg Kroah-Hartman0ec24912012-12-21 13:19:58 -0800172static int sch_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
Alek Du07ab85d2008-05-06 21:31:41 +0800173{
Alek Du07ab85d2008-05-06 21:31:41 +0800174 const struct ata_port_info *ppi[] = { &sch_port_info, NULL };
Alek Du07ab85d2008-05-06 21:31:41 +0800175
Joe Perches06296a12011-04-15 15:52:00 -0700176 ata_print_version_once(&pdev->dev, DRV_VERSION);
Alek Du07ab85d2008-05-06 21:31:41 +0800177
Tejun Heo1c5afdf2010-05-19 22:10:22 +0200178 return ata_pci_bmdma_init_one(pdev, ppi, &sch_sht, NULL, 0);
Alek Du07ab85d2008-05-06 21:31:41 +0800179}
180
Axel Lin2fc75da2012-04-19 13:43:05 +0800181module_pci_driver(sch_pci_driver);