Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | /* |
| 2 | * linux/drivers/char/8250_pci.c |
| 3 | * |
| 4 | * Probe module for 8250/16550-type PCI serial ports. |
| 5 | * |
| 6 | * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. |
| 7 | * |
| 8 | * Copyright (C) 2001 Russell King, All Rights Reserved. |
| 9 | * |
| 10 | * This program is free software; you can redistribute it and/or modify |
| 11 | * it under the terms of the GNU General Public License as published by |
| 12 | * the Free Software Foundation; either version 2 of the License. |
| 13 | * |
| 14 | * $Id: 8250_pci.c,v 1.28 2002/11/02 11:14:18 rmk Exp $ |
| 15 | */ |
| 16 | #include <linux/module.h> |
| 17 | #include <linux/init.h> |
| 18 | #include <linux/pci.h> |
| 19 | #include <linux/sched.h> |
| 20 | #include <linux/string.h> |
| 21 | #include <linux/kernel.h> |
| 22 | #include <linux/slab.h> |
| 23 | #include <linux/delay.h> |
| 24 | #include <linux/tty.h> |
| 25 | #include <linux/serial_core.h> |
| 26 | #include <linux/8250_pci.h> |
| 27 | #include <linux/bitops.h> |
| 28 | |
| 29 | #include <asm/byteorder.h> |
| 30 | #include <asm/io.h> |
| 31 | |
| 32 | #include "8250.h" |
| 33 | |
| 34 | #undef SERIAL_DEBUG_PCI |
| 35 | |
| 36 | /* |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 37 | * init function returns: |
| 38 | * > 0 - number of ports |
| 39 | * = 0 - use board->num_ports |
| 40 | * < 0 - error |
| 41 | */ |
| 42 | struct pci_serial_quirk { |
| 43 | u32 vendor; |
| 44 | u32 device; |
| 45 | u32 subvendor; |
| 46 | u32 subdevice; |
| 47 | int (*init)(struct pci_dev *dev); |
Russell King | 70db3d9 | 2005-07-27 11:34:27 +0100 | [diff] [blame] | 48 | int (*setup)(struct serial_private *, struct pciserial_board *, |
Russell King | 05caac5 | 2005-07-27 11:41:18 +0100 | [diff] [blame] | 49 | struct uart_port *, int); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 50 | void (*exit)(struct pci_dev *dev); |
| 51 | }; |
| 52 | |
| 53 | #define PCI_NUM_BAR_RESOURCES 6 |
| 54 | |
| 55 | struct serial_private { |
Russell King | 70db3d9 | 2005-07-27 11:34:27 +0100 | [diff] [blame] | 56 | struct pci_dev *dev; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 57 | unsigned int nr; |
| 58 | void __iomem *remapped_bar[PCI_NUM_BAR_RESOURCES]; |
| 59 | struct pci_serial_quirk *quirk; |
| 60 | int line[0]; |
| 61 | }; |
| 62 | |
| 63 | static void moan_device(const char *str, struct pci_dev *dev) |
| 64 | { |
| 65 | printk(KERN_WARNING "%s: %s\n" |
| 66 | KERN_WARNING "Please send the output of lspci -vv, this\n" |
| 67 | KERN_WARNING "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n" |
| 68 | KERN_WARNING "manufacturer and name of serial board or\n" |
| 69 | KERN_WARNING "modem board to rmk+serial@arm.linux.org.uk.\n", |
| 70 | pci_name(dev), str, dev->vendor, dev->device, |
| 71 | dev->subsystem_vendor, dev->subsystem_device); |
| 72 | } |
| 73 | |
| 74 | static int |
Russell King | 70db3d9 | 2005-07-27 11:34:27 +0100 | [diff] [blame] | 75 | setup_port(struct serial_private *priv, struct uart_port *port, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 76 | int bar, int offset, int regshift) |
| 77 | { |
Russell King | 70db3d9 | 2005-07-27 11:34:27 +0100 | [diff] [blame] | 78 | struct pci_dev *dev = priv->dev; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 79 | unsigned long base, len; |
| 80 | |
| 81 | if (bar >= PCI_NUM_BAR_RESOURCES) |
| 82 | return -EINVAL; |
| 83 | |
Russell King | 72ce9a8 | 2005-07-27 11:32:04 +0100 | [diff] [blame] | 84 | base = pci_resource_start(dev, bar); |
| 85 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 86 | if (pci_resource_flags(dev, bar) & IORESOURCE_MEM) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 87 | len = pci_resource_len(dev, bar); |
| 88 | |
| 89 | if (!priv->remapped_bar[bar]) |
| 90 | priv->remapped_bar[bar] = ioremap(base, len); |
| 91 | if (!priv->remapped_bar[bar]) |
| 92 | return -ENOMEM; |
| 93 | |
| 94 | port->iotype = UPIO_MEM; |
Russell King | 72ce9a8 | 2005-07-27 11:32:04 +0100 | [diff] [blame] | 95 | port->iobase = 0; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 96 | port->mapbase = base + offset; |
| 97 | port->membase = priv->remapped_bar[bar] + offset; |
| 98 | port->regshift = regshift; |
| 99 | } else { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 100 | port->iotype = UPIO_PORT; |
Russell King | 72ce9a8 | 2005-07-27 11:32:04 +0100 | [diff] [blame] | 101 | port->iobase = base + offset; |
| 102 | port->mapbase = 0; |
| 103 | port->membase = NULL; |
| 104 | port->regshift = 0; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 105 | } |
| 106 | return 0; |
| 107 | } |
| 108 | |
| 109 | /* |
| 110 | * AFAVLAB uses a different mixture of BARs and offsets |
| 111 | * Not that ugly ;) -- HW |
| 112 | */ |
| 113 | static int |
Russell King | 70db3d9 | 2005-07-27 11:34:27 +0100 | [diff] [blame] | 114 | afavlab_setup(struct serial_private *priv, struct pciserial_board *board, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 115 | struct uart_port *port, int idx) |
| 116 | { |
| 117 | unsigned int bar, offset = board->first_offset; |
| 118 | |
| 119 | bar = FL_GET_BASE(board->flags); |
| 120 | if (idx < 4) |
| 121 | bar += idx; |
| 122 | else { |
| 123 | bar = 4; |
| 124 | offset += (idx - 4) * board->uart_offset; |
| 125 | } |
| 126 | |
Russell King | 70db3d9 | 2005-07-27 11:34:27 +0100 | [diff] [blame] | 127 | return setup_port(priv, port, bar, offset, board->reg_shift); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 128 | } |
| 129 | |
| 130 | /* |
| 131 | * HP's Remote Management Console. The Diva chip came in several |
| 132 | * different versions. N-class, L2000 and A500 have two Diva chips, each |
| 133 | * with 3 UARTs (the third UART on the second chip is unused). Superdome |
| 134 | * and Keystone have one Diva chip with 3 UARTs. Some later machines have |
| 135 | * one Diva chip, but it has been expanded to 5 UARTs. |
| 136 | */ |
| 137 | static int __devinit pci_hp_diva_init(struct pci_dev *dev) |
| 138 | { |
| 139 | int rc = 0; |
| 140 | |
| 141 | switch (dev->subsystem_device) { |
| 142 | case PCI_DEVICE_ID_HP_DIVA_TOSCA1: |
| 143 | case PCI_DEVICE_ID_HP_DIVA_HALFDOME: |
| 144 | case PCI_DEVICE_ID_HP_DIVA_KEYSTONE: |
| 145 | case PCI_DEVICE_ID_HP_DIVA_EVEREST: |
| 146 | rc = 3; |
| 147 | break; |
| 148 | case PCI_DEVICE_ID_HP_DIVA_TOSCA2: |
| 149 | rc = 2; |
| 150 | break; |
| 151 | case PCI_DEVICE_ID_HP_DIVA_MAESTRO: |
| 152 | rc = 4; |
| 153 | break; |
| 154 | case PCI_DEVICE_ID_HP_DIVA_POWERBAR: |
Justin Chen | 551f8f0 | 2005-10-24 22:16:38 +0100 | [diff] [blame] | 155 | case PCI_DEVICE_ID_HP_DIVA_HURRICANE: |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 156 | rc = 1; |
| 157 | break; |
| 158 | } |
| 159 | |
| 160 | return rc; |
| 161 | } |
| 162 | |
| 163 | /* |
| 164 | * HP's Diva chip puts the 4th/5th serial port further out, and |
| 165 | * some serial ports are supposed to be hidden on certain models. |
| 166 | */ |
| 167 | static int |
Russell King | 70db3d9 | 2005-07-27 11:34:27 +0100 | [diff] [blame] | 168 | pci_hp_diva_setup(struct serial_private *priv, struct pciserial_board *board, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 169 | struct uart_port *port, int idx) |
| 170 | { |
| 171 | unsigned int offset = board->first_offset; |
| 172 | unsigned int bar = FL_GET_BASE(board->flags); |
| 173 | |
Russell King | 70db3d9 | 2005-07-27 11:34:27 +0100 | [diff] [blame] | 174 | switch (priv->dev->subsystem_device) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 175 | case PCI_DEVICE_ID_HP_DIVA_MAESTRO: |
| 176 | if (idx == 3) |
| 177 | idx++; |
| 178 | break; |
| 179 | case PCI_DEVICE_ID_HP_DIVA_EVEREST: |
| 180 | if (idx > 0) |
| 181 | idx++; |
| 182 | if (idx > 2) |
| 183 | idx++; |
| 184 | break; |
| 185 | } |
| 186 | if (idx > 2) |
| 187 | offset = 0x18; |
| 188 | |
| 189 | offset += idx * board->uart_offset; |
| 190 | |
Russell King | 70db3d9 | 2005-07-27 11:34:27 +0100 | [diff] [blame] | 191 | return setup_port(priv, port, bar, offset, board->reg_shift); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 192 | } |
| 193 | |
| 194 | /* |
| 195 | * Added for EKF Intel i960 serial boards |
| 196 | */ |
| 197 | static int __devinit pci_inteli960ni_init(struct pci_dev *dev) |
| 198 | { |
| 199 | unsigned long oldval; |
| 200 | |
| 201 | if (!(dev->subsystem_device & 0x1000)) |
| 202 | return -ENODEV; |
| 203 | |
| 204 | /* is firmware started? */ |
| 205 | pci_read_config_dword(dev, 0x44, (void*) &oldval); |
| 206 | if (oldval == 0x00001000L) { /* RESET value */ |
| 207 | printk(KERN_DEBUG "Local i960 firmware missing"); |
| 208 | return -ENODEV; |
| 209 | } |
| 210 | return 0; |
| 211 | } |
| 212 | |
| 213 | /* |
| 214 | * Some PCI serial cards using the PLX 9050 PCI interface chip require |
| 215 | * that the card interrupt be explicitly enabled or disabled. This |
| 216 | * seems to be mainly needed on card using the PLX which also use I/O |
| 217 | * mapped memory. |
| 218 | */ |
| 219 | static int __devinit pci_plx9050_init(struct pci_dev *dev) |
| 220 | { |
| 221 | u8 irq_config; |
| 222 | void __iomem *p; |
| 223 | |
| 224 | if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0) { |
| 225 | moan_device("no memory in bar 0", dev); |
| 226 | return 0; |
| 227 | } |
| 228 | |
| 229 | irq_config = 0x41; |
Bjorn Helgaas | add7b58 | 2005-10-24 22:11:57 +0100 | [diff] [blame] | 230 | if (dev->vendor == PCI_VENDOR_ID_PANACOM || |
| 231 | dev->subsystem_vendor == PCI_SUBVENDOR_ID_EXSYS) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 232 | irq_config = 0x43; |
Bjorn Helgaas | add7b58 | 2005-10-24 22:11:57 +0100 | [diff] [blame] | 233 | } |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 234 | if ((dev->vendor == PCI_VENDOR_ID_PLX) && |
| 235 | (dev->device == PCI_DEVICE_ID_PLX_ROMULUS)) { |
| 236 | /* |
| 237 | * As the megawolf cards have the int pins active |
| 238 | * high, and have 2 UART chips, both ints must be |
| 239 | * enabled on the 9050. Also, the UARTS are set in |
| 240 | * 16450 mode by default, so we have to enable the |
| 241 | * 16C950 'enhanced' mode so that we can use the |
| 242 | * deep FIFOs |
| 243 | */ |
| 244 | irq_config = 0x5b; |
| 245 | } |
| 246 | |
| 247 | /* |
| 248 | * enable/disable interrupts |
| 249 | */ |
| 250 | p = ioremap(pci_resource_start(dev, 0), 0x80); |
| 251 | if (p == NULL) |
| 252 | return -ENOMEM; |
| 253 | writel(irq_config, p + 0x4c); |
| 254 | |
| 255 | /* |
| 256 | * Read the register back to ensure that it took effect. |
| 257 | */ |
| 258 | readl(p + 0x4c); |
| 259 | iounmap(p); |
| 260 | |
| 261 | return 0; |
| 262 | } |
| 263 | |
| 264 | static void __devexit pci_plx9050_exit(struct pci_dev *dev) |
| 265 | { |
| 266 | u8 __iomem *p; |
| 267 | |
| 268 | if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0) |
| 269 | return; |
| 270 | |
| 271 | /* |
| 272 | * disable interrupts |
| 273 | */ |
| 274 | p = ioremap(pci_resource_start(dev, 0), 0x80); |
| 275 | if (p != NULL) { |
| 276 | writel(0, p + 0x4c); |
| 277 | |
| 278 | /* |
| 279 | * Read the register back to ensure that it took effect. |
| 280 | */ |
| 281 | readl(p + 0x4c); |
| 282 | iounmap(p); |
| 283 | } |
| 284 | } |
| 285 | |
| 286 | /* SBS Technologies Inc. PMC-OCTPRO and P-OCTAL cards */ |
| 287 | static int |
Russell King | 70db3d9 | 2005-07-27 11:34:27 +0100 | [diff] [blame] | 288 | sbs_setup(struct serial_private *priv, struct pciserial_board *board, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 289 | struct uart_port *port, int idx) |
| 290 | { |
| 291 | unsigned int bar, offset = board->first_offset; |
| 292 | |
| 293 | bar = 0; |
| 294 | |
| 295 | if (idx < 4) { |
| 296 | /* first four channels map to 0, 0x100, 0x200, 0x300 */ |
| 297 | offset += idx * board->uart_offset; |
| 298 | } else if (idx < 8) { |
| 299 | /* last four channels map to 0x1000, 0x1100, 0x1200, 0x1300 */ |
| 300 | offset += idx * board->uart_offset + 0xC00; |
| 301 | } else /* we have only 8 ports on PMC-OCTALPRO */ |
| 302 | return 1; |
| 303 | |
Russell King | 70db3d9 | 2005-07-27 11:34:27 +0100 | [diff] [blame] | 304 | return setup_port(priv, port, bar, offset, board->reg_shift); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 305 | } |
| 306 | |
| 307 | /* |
| 308 | * This does initialization for PMC OCTALPRO cards: |
| 309 | * maps the device memory, resets the UARTs (needed, bc |
| 310 | * if the module is removed and inserted again, the card |
| 311 | * is in the sleep mode) and enables global interrupt. |
| 312 | */ |
| 313 | |
| 314 | /* global control register offset for SBS PMC-OctalPro */ |
| 315 | #define OCT_REG_CR_OFF 0x500 |
| 316 | |
| 317 | static int __devinit sbs_init(struct pci_dev *dev) |
| 318 | { |
| 319 | u8 __iomem *p; |
| 320 | |
| 321 | p = ioremap(pci_resource_start(dev, 0),pci_resource_len(dev,0)); |
| 322 | |
| 323 | if (p == NULL) |
| 324 | return -ENOMEM; |
| 325 | /* Set bit-4 Control Register (UART RESET) in to reset the uarts */ |
| 326 | writeb(0x10,p + OCT_REG_CR_OFF); |
| 327 | udelay(50); |
| 328 | writeb(0x0,p + OCT_REG_CR_OFF); |
| 329 | |
| 330 | /* Set bit-2 (INTENABLE) of Control Register */ |
| 331 | writeb(0x4, p + OCT_REG_CR_OFF); |
| 332 | iounmap(p); |
| 333 | |
| 334 | return 0; |
| 335 | } |
| 336 | |
| 337 | /* |
| 338 | * Disables the global interrupt of PMC-OctalPro |
| 339 | */ |
| 340 | |
| 341 | static void __devexit sbs_exit(struct pci_dev *dev) |
| 342 | { |
| 343 | u8 __iomem *p; |
| 344 | |
| 345 | p = ioremap(pci_resource_start(dev, 0),pci_resource_len(dev,0)); |
| 346 | if (p != NULL) { |
| 347 | writeb(0, p + OCT_REG_CR_OFF); |
| 348 | } |
| 349 | iounmap(p); |
| 350 | } |
| 351 | |
| 352 | /* |
| 353 | * SIIG serial cards have an PCI interface chip which also controls |
| 354 | * the UART clocking frequency. Each UART can be clocked independently |
| 355 | * (except cards equiped with 4 UARTs) and initial clocking settings |
| 356 | * are stored in the EEPROM chip. It can cause problems because this |
| 357 | * version of serial driver doesn't support differently clocked UART's |
| 358 | * on single PCI card. To prevent this, initialization functions set |
| 359 | * high frequency clocking for all UART's on given card. It is safe (I |
| 360 | * hope) because it doesn't touch EEPROM settings to prevent conflicts |
| 361 | * with other OSes (like M$ DOS). |
| 362 | * |
| 363 | * SIIG support added by Andrey Panin <pazke@donpac.ru>, 10/1999 |
| 364 | * |
| 365 | * There is two family of SIIG serial cards with different PCI |
| 366 | * interface chip and different configuration methods: |
| 367 | * - 10x cards have control registers in IO and/or memory space; |
| 368 | * - 20x cards have control registers in standard PCI configuration space. |
| 369 | * |
Russell King | 67d74b8 | 2005-07-27 11:33:03 +0100 | [diff] [blame] | 370 | * Note: all 10x cards have PCI device ids 0x10.. |
| 371 | * all 20x cards have PCI device ids 0x20.. |
| 372 | * |
Andrey Panin | fbc0dc0 | 2005-07-18 11:38:09 +0100 | [diff] [blame] | 373 | * There are also Quartet Serial cards which use Oxford Semiconductor |
| 374 | * 16954 quad UART PCI chip clocked by 18.432 MHz quartz. |
| 375 | * |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 376 | * Note: some SIIG cards are probed by the parport_serial object. |
| 377 | */ |
| 378 | |
| 379 | #define PCI_DEVICE_ID_SIIG_1S_10x (PCI_DEVICE_ID_SIIG_1S_10x_550 & 0xfffc) |
| 380 | #define PCI_DEVICE_ID_SIIG_2S_10x (PCI_DEVICE_ID_SIIG_2S_10x_550 & 0xfff8) |
| 381 | |
| 382 | static int pci_siig10x_init(struct pci_dev *dev) |
| 383 | { |
| 384 | u16 data; |
| 385 | void __iomem *p; |
| 386 | |
| 387 | switch (dev->device & 0xfff8) { |
| 388 | case PCI_DEVICE_ID_SIIG_1S_10x: /* 1S */ |
| 389 | data = 0xffdf; |
| 390 | break; |
| 391 | case PCI_DEVICE_ID_SIIG_2S_10x: /* 2S, 2S1P */ |
| 392 | data = 0xf7ff; |
| 393 | break; |
| 394 | default: /* 1S1P, 4S */ |
| 395 | data = 0xfffb; |
| 396 | break; |
| 397 | } |
| 398 | |
| 399 | p = ioremap(pci_resource_start(dev, 0), 0x80); |
| 400 | if (p == NULL) |
| 401 | return -ENOMEM; |
| 402 | |
| 403 | writew(readw(p + 0x28) & data, p + 0x28); |
| 404 | readw(p + 0x28); |
| 405 | iounmap(p); |
| 406 | return 0; |
| 407 | } |
| 408 | |
| 409 | #define PCI_DEVICE_ID_SIIG_2S_20x (PCI_DEVICE_ID_SIIG_2S_20x_550 & 0xfffc) |
| 410 | #define PCI_DEVICE_ID_SIIG_2S1P_20x (PCI_DEVICE_ID_SIIG_2S1P_20x_550 & 0xfffc) |
| 411 | |
| 412 | static int pci_siig20x_init(struct pci_dev *dev) |
| 413 | { |
| 414 | u8 data; |
| 415 | |
| 416 | /* Change clock frequency for the first UART. */ |
| 417 | pci_read_config_byte(dev, 0x6f, &data); |
| 418 | pci_write_config_byte(dev, 0x6f, data & 0xef); |
| 419 | |
| 420 | /* If this card has 2 UART, we have to do the same with second UART. */ |
| 421 | if (((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S_20x) || |
| 422 | ((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S1P_20x)) { |
| 423 | pci_read_config_byte(dev, 0x73, &data); |
| 424 | pci_write_config_byte(dev, 0x73, data & 0xef); |
| 425 | } |
| 426 | return 0; |
| 427 | } |
| 428 | |
Russell King | 67d74b8 | 2005-07-27 11:33:03 +0100 | [diff] [blame] | 429 | static int pci_siig_init(struct pci_dev *dev) |
| 430 | { |
| 431 | unsigned int type = dev->device & 0xff00; |
| 432 | |
| 433 | if (type == 0x1000) |
| 434 | return pci_siig10x_init(dev); |
| 435 | else if (type == 0x2000) |
| 436 | return pci_siig20x_init(dev); |
| 437 | |
| 438 | moan_device("Unknown SIIG card", dev); |
| 439 | return -ENODEV; |
| 440 | } |
| 441 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 442 | /* |
| 443 | * Timedia has an explosion of boards, and to avoid the PCI table from |
| 444 | * growing *huge*, we use this function to collapse some 70 entries |
| 445 | * in the PCI table into one, for sanity's and compactness's sake. |
| 446 | */ |
| 447 | static unsigned short timedia_single_port[] = { |
| 448 | 0x4025, 0x4027, 0x4028, 0x5025, 0x5027, 0 |
| 449 | }; |
| 450 | |
| 451 | static unsigned short timedia_dual_port[] = { |
| 452 | 0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085, |
| 453 | 0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079, |
| 454 | 0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079, |
| 455 | 0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079, |
| 456 | 0xD079, 0 |
| 457 | }; |
| 458 | |
| 459 | static unsigned short timedia_quad_port[] = { |
| 460 | 0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157, |
| 461 | 0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159, |
| 462 | 0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056, |
| 463 | 0xB157, 0 |
| 464 | }; |
| 465 | |
| 466 | static unsigned short timedia_eight_port[] = { |
| 467 | 0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166, |
| 468 | 0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0 |
| 469 | }; |
| 470 | |
Arjan van de Ven | cb3592b | 2005-11-28 21:04:11 +0000 | [diff] [blame^] | 471 | static const struct timedia_struct { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 472 | int num; |
| 473 | unsigned short *ids; |
| 474 | } timedia_data[] = { |
| 475 | { 1, timedia_single_port }, |
| 476 | { 2, timedia_dual_port }, |
| 477 | { 4, timedia_quad_port }, |
| 478 | { 8, timedia_eight_port }, |
| 479 | { 0, NULL } |
| 480 | }; |
| 481 | |
| 482 | static int __devinit pci_timedia_init(struct pci_dev *dev) |
| 483 | { |
| 484 | unsigned short *ids; |
| 485 | int i, j; |
| 486 | |
| 487 | for (i = 0; timedia_data[i].num; i++) { |
| 488 | ids = timedia_data[i].ids; |
| 489 | for (j = 0; ids[j]; j++) |
| 490 | if (dev->subsystem_device == ids[j]) |
| 491 | return timedia_data[i].num; |
| 492 | } |
| 493 | return 0; |
| 494 | } |
| 495 | |
| 496 | /* |
| 497 | * Timedia/SUNIX uses a mixture of BARs and offsets |
| 498 | * Ugh, this is ugly as all hell --- TYT |
| 499 | */ |
| 500 | static int |
Russell King | 70db3d9 | 2005-07-27 11:34:27 +0100 | [diff] [blame] | 501 | pci_timedia_setup(struct serial_private *priv, struct pciserial_board *board, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 502 | struct uart_port *port, int idx) |
| 503 | { |
| 504 | unsigned int bar = 0, offset = board->first_offset; |
| 505 | |
| 506 | switch (idx) { |
| 507 | case 0: |
| 508 | bar = 0; |
| 509 | break; |
| 510 | case 1: |
| 511 | offset = board->uart_offset; |
| 512 | bar = 0; |
| 513 | break; |
| 514 | case 2: |
| 515 | bar = 1; |
| 516 | break; |
| 517 | case 3: |
| 518 | offset = board->uart_offset; |
| 519 | bar = 1; |
| 520 | case 4: /* BAR 2 */ |
| 521 | case 5: /* BAR 3 */ |
| 522 | case 6: /* BAR 4 */ |
| 523 | case 7: /* BAR 5 */ |
| 524 | bar = idx - 2; |
| 525 | } |
| 526 | |
Russell King | 70db3d9 | 2005-07-27 11:34:27 +0100 | [diff] [blame] | 527 | return setup_port(priv, port, bar, offset, board->reg_shift); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 528 | } |
| 529 | |
| 530 | /* |
| 531 | * Some Titan cards are also a little weird |
| 532 | */ |
| 533 | static int |
Russell King | 70db3d9 | 2005-07-27 11:34:27 +0100 | [diff] [blame] | 534 | titan_400l_800l_setup(struct serial_private *priv, |
Russell King | 1c7c1fe | 2005-07-27 11:31:19 +0100 | [diff] [blame] | 535 | struct pciserial_board *board, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 536 | struct uart_port *port, int idx) |
| 537 | { |
| 538 | unsigned int bar, offset = board->first_offset; |
| 539 | |
| 540 | switch (idx) { |
| 541 | case 0: |
| 542 | bar = 1; |
| 543 | break; |
| 544 | case 1: |
| 545 | bar = 2; |
| 546 | break; |
| 547 | default: |
| 548 | bar = 4; |
| 549 | offset = (idx - 2) * board->uart_offset; |
| 550 | } |
| 551 | |
Russell King | 70db3d9 | 2005-07-27 11:34:27 +0100 | [diff] [blame] | 552 | return setup_port(priv, port, bar, offset, board->reg_shift); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 553 | } |
| 554 | |
| 555 | static int __devinit pci_xircom_init(struct pci_dev *dev) |
| 556 | { |
| 557 | msleep(100); |
| 558 | return 0; |
| 559 | } |
| 560 | |
| 561 | static int __devinit pci_netmos_init(struct pci_dev *dev) |
| 562 | { |
| 563 | /* subdevice 0x00PS means <P> parallel, <S> serial */ |
| 564 | unsigned int num_serial = dev->subsystem_device & 0xf; |
| 565 | |
| 566 | if (num_serial == 0) |
| 567 | return -ENODEV; |
| 568 | return num_serial; |
| 569 | } |
| 570 | |
| 571 | static int |
Russell King | 70db3d9 | 2005-07-27 11:34:27 +0100 | [diff] [blame] | 572 | pci_default_setup(struct serial_private *priv, struct pciserial_board *board, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 573 | struct uart_port *port, int idx) |
| 574 | { |
| 575 | unsigned int bar, offset = board->first_offset, maxnr; |
| 576 | |
| 577 | bar = FL_GET_BASE(board->flags); |
| 578 | if (board->flags & FL_BASE_BARS) |
| 579 | bar += idx; |
| 580 | else |
| 581 | offset += idx * board->uart_offset; |
| 582 | |
Russell King | 70db3d9 | 2005-07-27 11:34:27 +0100 | [diff] [blame] | 583 | maxnr = (pci_resource_len(priv->dev, bar) - board->first_offset) / |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 584 | (8 << board->reg_shift); |
| 585 | |
| 586 | if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr) |
| 587 | return 1; |
| 588 | |
Russell King | 70db3d9 | 2005-07-27 11:34:27 +0100 | [diff] [blame] | 589 | return setup_port(priv, port, bar, offset, board->reg_shift); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 590 | } |
| 591 | |
| 592 | /* This should be in linux/pci_ids.h */ |
| 593 | #define PCI_VENDOR_ID_SBSMODULARIO 0x124B |
| 594 | #define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B |
| 595 | #define PCI_DEVICE_ID_OCTPRO 0x0001 |
| 596 | #define PCI_SUBDEVICE_ID_OCTPRO232 0x0108 |
| 597 | #define PCI_SUBDEVICE_ID_OCTPRO422 0x0208 |
| 598 | #define PCI_SUBDEVICE_ID_POCTAL232 0x0308 |
| 599 | #define PCI_SUBDEVICE_ID_POCTAL422 0x0408 |
| 600 | |
| 601 | /* |
| 602 | * Master list of serial port init/setup/exit quirks. |
| 603 | * This does not describe the general nature of the port. |
| 604 | * (ie, baud base, number and location of ports, etc) |
| 605 | * |
| 606 | * This list is ordered alphabetically by vendor then device. |
| 607 | * Specific entries must come before more generic entries. |
| 608 | */ |
| 609 | static struct pci_serial_quirk pci_serial_quirks[] = { |
| 610 | /* |
| 611 | * AFAVLAB cards. |
| 612 | * It is not clear whether this applies to all products. |
| 613 | */ |
| 614 | { |
| 615 | .vendor = PCI_VENDOR_ID_AFAVLAB, |
| 616 | .device = PCI_ANY_ID, |
| 617 | .subvendor = PCI_ANY_ID, |
| 618 | .subdevice = PCI_ANY_ID, |
| 619 | .setup = afavlab_setup, |
| 620 | }, |
| 621 | /* |
| 622 | * HP Diva |
| 623 | */ |
| 624 | { |
| 625 | .vendor = PCI_VENDOR_ID_HP, |
| 626 | .device = PCI_DEVICE_ID_HP_DIVA, |
| 627 | .subvendor = PCI_ANY_ID, |
| 628 | .subdevice = PCI_ANY_ID, |
| 629 | .init = pci_hp_diva_init, |
| 630 | .setup = pci_hp_diva_setup, |
| 631 | }, |
| 632 | /* |
| 633 | * Intel |
| 634 | */ |
| 635 | { |
| 636 | .vendor = PCI_VENDOR_ID_INTEL, |
| 637 | .device = PCI_DEVICE_ID_INTEL_80960_RP, |
| 638 | .subvendor = 0xe4bf, |
| 639 | .subdevice = PCI_ANY_ID, |
| 640 | .init = pci_inteli960ni_init, |
| 641 | .setup = pci_default_setup, |
| 642 | }, |
| 643 | /* |
| 644 | * Panacom |
| 645 | */ |
| 646 | { |
| 647 | .vendor = PCI_VENDOR_ID_PANACOM, |
| 648 | .device = PCI_DEVICE_ID_PANACOM_QUADMODEM, |
| 649 | .subvendor = PCI_ANY_ID, |
| 650 | .subdevice = PCI_ANY_ID, |
| 651 | .init = pci_plx9050_init, |
| 652 | .setup = pci_default_setup, |
| 653 | .exit = __devexit_p(pci_plx9050_exit), |
| 654 | }, |
| 655 | { |
| 656 | .vendor = PCI_VENDOR_ID_PANACOM, |
| 657 | .device = PCI_DEVICE_ID_PANACOM_DUALMODEM, |
| 658 | .subvendor = PCI_ANY_ID, |
| 659 | .subdevice = PCI_ANY_ID, |
| 660 | .init = pci_plx9050_init, |
| 661 | .setup = pci_default_setup, |
| 662 | .exit = __devexit_p(pci_plx9050_exit), |
| 663 | }, |
| 664 | /* |
| 665 | * PLX |
| 666 | */ |
| 667 | { |
| 668 | .vendor = PCI_VENDOR_ID_PLX, |
| 669 | .device = PCI_DEVICE_ID_PLX_9050, |
Bjorn Helgaas | add7b58 | 2005-10-24 22:11:57 +0100 | [diff] [blame] | 670 | .subvendor = PCI_SUBVENDOR_ID_EXSYS, |
| 671 | .subdevice = PCI_SUBDEVICE_ID_EXSYS_4055, |
| 672 | .init = pci_plx9050_init, |
| 673 | .setup = pci_default_setup, |
| 674 | .exit = __devexit_p(pci_plx9050_exit), |
| 675 | }, |
| 676 | { |
| 677 | .vendor = PCI_VENDOR_ID_PLX, |
| 678 | .device = PCI_DEVICE_ID_PLX_9050, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 679 | .subvendor = PCI_SUBVENDOR_ID_KEYSPAN, |
| 680 | .subdevice = PCI_SUBDEVICE_ID_KEYSPAN_SX2, |
| 681 | .init = pci_plx9050_init, |
| 682 | .setup = pci_default_setup, |
| 683 | .exit = __devexit_p(pci_plx9050_exit), |
| 684 | }, |
| 685 | { |
| 686 | .vendor = PCI_VENDOR_ID_PLX, |
| 687 | .device = PCI_DEVICE_ID_PLX_ROMULUS, |
| 688 | .subvendor = PCI_VENDOR_ID_PLX, |
| 689 | .subdevice = PCI_DEVICE_ID_PLX_ROMULUS, |
| 690 | .init = pci_plx9050_init, |
| 691 | .setup = pci_default_setup, |
| 692 | .exit = __devexit_p(pci_plx9050_exit), |
| 693 | }, |
| 694 | /* |
| 695 | * SBS Technologies, Inc., PMC-OCTALPRO 232 |
| 696 | */ |
| 697 | { |
| 698 | .vendor = PCI_VENDOR_ID_SBSMODULARIO, |
| 699 | .device = PCI_DEVICE_ID_OCTPRO, |
| 700 | .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, |
| 701 | .subdevice = PCI_SUBDEVICE_ID_OCTPRO232, |
| 702 | .init = sbs_init, |
| 703 | .setup = sbs_setup, |
| 704 | .exit = __devexit_p(sbs_exit), |
| 705 | }, |
| 706 | /* |
| 707 | * SBS Technologies, Inc., PMC-OCTALPRO 422 |
| 708 | */ |
| 709 | { |
| 710 | .vendor = PCI_VENDOR_ID_SBSMODULARIO, |
| 711 | .device = PCI_DEVICE_ID_OCTPRO, |
| 712 | .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, |
| 713 | .subdevice = PCI_SUBDEVICE_ID_OCTPRO422, |
| 714 | .init = sbs_init, |
| 715 | .setup = sbs_setup, |
| 716 | .exit = __devexit_p(sbs_exit), |
| 717 | }, |
| 718 | /* |
| 719 | * SBS Technologies, Inc., P-Octal 232 |
| 720 | */ |
| 721 | { |
| 722 | .vendor = PCI_VENDOR_ID_SBSMODULARIO, |
| 723 | .device = PCI_DEVICE_ID_OCTPRO, |
| 724 | .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, |
| 725 | .subdevice = PCI_SUBDEVICE_ID_POCTAL232, |
| 726 | .init = sbs_init, |
| 727 | .setup = sbs_setup, |
| 728 | .exit = __devexit_p(sbs_exit), |
| 729 | }, |
| 730 | /* |
| 731 | * SBS Technologies, Inc., P-Octal 422 |
| 732 | */ |
| 733 | { |
| 734 | .vendor = PCI_VENDOR_ID_SBSMODULARIO, |
| 735 | .device = PCI_DEVICE_ID_OCTPRO, |
| 736 | .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, |
| 737 | .subdevice = PCI_SUBDEVICE_ID_POCTAL422, |
| 738 | .init = sbs_init, |
| 739 | .setup = sbs_setup, |
| 740 | .exit = __devexit_p(sbs_exit), |
| 741 | }, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 742 | /* |
| 743 | * SIIG cards. |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 744 | */ |
| 745 | { |
| 746 | .vendor = PCI_VENDOR_ID_SIIG, |
Russell King | 67d74b8 | 2005-07-27 11:33:03 +0100 | [diff] [blame] | 747 | .device = PCI_ANY_ID, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 748 | .subvendor = PCI_ANY_ID, |
| 749 | .subdevice = PCI_ANY_ID, |
Russell King | 67d74b8 | 2005-07-27 11:33:03 +0100 | [diff] [blame] | 750 | .init = pci_siig_init, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 751 | .setup = pci_default_setup, |
| 752 | }, |
| 753 | /* |
| 754 | * Titan cards |
| 755 | */ |
| 756 | { |
| 757 | .vendor = PCI_VENDOR_ID_TITAN, |
| 758 | .device = PCI_DEVICE_ID_TITAN_400L, |
| 759 | .subvendor = PCI_ANY_ID, |
| 760 | .subdevice = PCI_ANY_ID, |
| 761 | .setup = titan_400l_800l_setup, |
| 762 | }, |
| 763 | { |
| 764 | .vendor = PCI_VENDOR_ID_TITAN, |
| 765 | .device = PCI_DEVICE_ID_TITAN_800L, |
| 766 | .subvendor = PCI_ANY_ID, |
| 767 | .subdevice = PCI_ANY_ID, |
| 768 | .setup = titan_400l_800l_setup, |
| 769 | }, |
| 770 | /* |
| 771 | * Timedia cards |
| 772 | */ |
| 773 | { |
| 774 | .vendor = PCI_VENDOR_ID_TIMEDIA, |
| 775 | .device = PCI_DEVICE_ID_TIMEDIA_1889, |
| 776 | .subvendor = PCI_VENDOR_ID_TIMEDIA, |
| 777 | .subdevice = PCI_ANY_ID, |
| 778 | .init = pci_timedia_init, |
| 779 | .setup = pci_timedia_setup, |
| 780 | }, |
| 781 | { |
| 782 | .vendor = PCI_VENDOR_ID_TIMEDIA, |
| 783 | .device = PCI_ANY_ID, |
| 784 | .subvendor = PCI_ANY_ID, |
| 785 | .subdevice = PCI_ANY_ID, |
| 786 | .setup = pci_timedia_setup, |
| 787 | }, |
| 788 | /* |
| 789 | * Xircom cards |
| 790 | */ |
| 791 | { |
| 792 | .vendor = PCI_VENDOR_ID_XIRCOM, |
| 793 | .device = PCI_DEVICE_ID_XIRCOM_X3201_MDM, |
| 794 | .subvendor = PCI_ANY_ID, |
| 795 | .subdevice = PCI_ANY_ID, |
| 796 | .init = pci_xircom_init, |
| 797 | .setup = pci_default_setup, |
| 798 | }, |
| 799 | /* |
| 800 | * Netmos cards |
| 801 | */ |
| 802 | { |
| 803 | .vendor = PCI_VENDOR_ID_NETMOS, |
| 804 | .device = PCI_ANY_ID, |
| 805 | .subvendor = PCI_ANY_ID, |
| 806 | .subdevice = PCI_ANY_ID, |
| 807 | .init = pci_netmos_init, |
| 808 | .setup = pci_default_setup, |
| 809 | }, |
| 810 | /* |
| 811 | * Default "match everything" terminator entry |
| 812 | */ |
| 813 | { |
| 814 | .vendor = PCI_ANY_ID, |
| 815 | .device = PCI_ANY_ID, |
| 816 | .subvendor = PCI_ANY_ID, |
| 817 | .subdevice = PCI_ANY_ID, |
| 818 | .setup = pci_default_setup, |
| 819 | } |
| 820 | }; |
| 821 | |
| 822 | static inline int quirk_id_matches(u32 quirk_id, u32 dev_id) |
| 823 | { |
| 824 | return quirk_id == PCI_ANY_ID || quirk_id == dev_id; |
| 825 | } |
| 826 | |
| 827 | static struct pci_serial_quirk *find_quirk(struct pci_dev *dev) |
| 828 | { |
| 829 | struct pci_serial_quirk *quirk; |
| 830 | |
| 831 | for (quirk = pci_serial_quirks; ; quirk++) |
| 832 | if (quirk_id_matches(quirk->vendor, dev->vendor) && |
| 833 | quirk_id_matches(quirk->device, dev->device) && |
| 834 | quirk_id_matches(quirk->subvendor, dev->subsystem_vendor) && |
| 835 | quirk_id_matches(quirk->subdevice, dev->subsystem_device)) |
| 836 | break; |
| 837 | return quirk; |
| 838 | } |
| 839 | |
| 840 | static _INLINE_ int |
Russell King | 72ce9a8 | 2005-07-27 11:32:04 +0100 | [diff] [blame] | 841 | get_pci_irq(struct pci_dev *dev, struct pciserial_board *board) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 842 | { |
| 843 | if (board->flags & FL_NOIRQ) |
| 844 | return 0; |
| 845 | else |
| 846 | return dev->irq; |
| 847 | } |
| 848 | |
| 849 | /* |
| 850 | * This is the configuration table for all of the PCI serial boards |
| 851 | * which we support. It is directly indexed by the pci_board_num_t enum |
| 852 | * value, which is encoded in the pci_device_id PCI probe table's |
| 853 | * driver_data member. |
| 854 | * |
| 855 | * The makeup of these names are: |
| 856 | * pbn_bn{_bt}_n_baud |
| 857 | * |
| 858 | * bn = PCI BAR number |
| 859 | * bt = Index using PCI BARs |
| 860 | * n = number of serial ports |
| 861 | * baud = baud rate |
| 862 | * |
Russell King | f1690f3 | 2005-05-06 10:19:09 +0100 | [diff] [blame] | 863 | * This table is sorted by (in order): baud, bt, bn, n. |
| 864 | * |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 865 | * Please note: in theory if n = 1, _bt infix should make no difference. |
| 866 | * ie, pbn_b0_1_115200 is the same as pbn_b0_bt_1_115200 |
| 867 | */ |
| 868 | enum pci_board_num_t { |
| 869 | pbn_default = 0, |
| 870 | |
| 871 | pbn_b0_1_115200, |
| 872 | pbn_b0_2_115200, |
| 873 | pbn_b0_4_115200, |
| 874 | pbn_b0_5_115200, |
| 875 | |
| 876 | pbn_b0_1_921600, |
| 877 | pbn_b0_2_921600, |
| 878 | pbn_b0_4_921600, |
| 879 | |
David Ranson | db1de15 | 2005-07-27 11:43:55 -0700 | [diff] [blame] | 880 | pbn_b0_2_1130000, |
| 881 | |
Andrey Panin | fbc0dc0 | 2005-07-18 11:38:09 +0100 | [diff] [blame] | 882 | pbn_b0_4_1152000, |
| 883 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 884 | pbn_b0_bt_1_115200, |
| 885 | pbn_b0_bt_2_115200, |
| 886 | pbn_b0_bt_8_115200, |
| 887 | |
| 888 | pbn_b0_bt_1_460800, |
| 889 | pbn_b0_bt_2_460800, |
| 890 | pbn_b0_bt_4_460800, |
| 891 | |
| 892 | pbn_b0_bt_1_921600, |
| 893 | pbn_b0_bt_2_921600, |
| 894 | pbn_b0_bt_4_921600, |
| 895 | pbn_b0_bt_8_921600, |
| 896 | |
| 897 | pbn_b1_1_115200, |
| 898 | pbn_b1_2_115200, |
| 899 | pbn_b1_4_115200, |
| 900 | pbn_b1_8_115200, |
| 901 | |
| 902 | pbn_b1_1_921600, |
| 903 | pbn_b1_2_921600, |
| 904 | pbn_b1_4_921600, |
| 905 | pbn_b1_8_921600, |
| 906 | |
| 907 | pbn_b1_bt_2_921600, |
| 908 | |
| 909 | pbn_b1_1_1382400, |
| 910 | pbn_b1_2_1382400, |
| 911 | pbn_b1_4_1382400, |
| 912 | pbn_b1_8_1382400, |
| 913 | |
| 914 | pbn_b2_1_115200, |
| 915 | pbn_b2_8_115200, |
| 916 | |
| 917 | pbn_b2_1_460800, |
| 918 | pbn_b2_4_460800, |
| 919 | pbn_b2_8_460800, |
| 920 | pbn_b2_16_460800, |
| 921 | |
| 922 | pbn_b2_1_921600, |
| 923 | pbn_b2_4_921600, |
| 924 | pbn_b2_8_921600, |
| 925 | |
| 926 | pbn_b2_bt_1_115200, |
| 927 | pbn_b2_bt_2_115200, |
| 928 | pbn_b2_bt_4_115200, |
| 929 | |
| 930 | pbn_b2_bt_2_921600, |
| 931 | pbn_b2_bt_4_921600, |
| 932 | |
| 933 | pbn_b3_4_115200, |
| 934 | pbn_b3_8_115200, |
| 935 | |
| 936 | /* |
| 937 | * Board-specific versions. |
| 938 | */ |
| 939 | pbn_panacom, |
| 940 | pbn_panacom2, |
| 941 | pbn_panacom4, |
Bjorn Helgaas | add7b58 | 2005-10-24 22:11:57 +0100 | [diff] [blame] | 942 | pbn_exsys_4055, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 943 | pbn_plx_romulus, |
| 944 | pbn_oxsemi, |
| 945 | pbn_intel_i960, |
| 946 | pbn_sgi_ioc3, |
| 947 | pbn_nec_nile4, |
| 948 | pbn_computone_4, |
| 949 | pbn_computone_6, |
| 950 | pbn_computone_8, |
| 951 | pbn_sbsxrsio, |
| 952 | pbn_exar_XR17C152, |
| 953 | pbn_exar_XR17C154, |
| 954 | pbn_exar_XR17C158, |
| 955 | }; |
| 956 | |
| 957 | /* |
| 958 | * uart_offset - the space between channels |
| 959 | * reg_shift - describes how the UART registers are mapped |
| 960 | * to PCI memory by the card. |
| 961 | * For example IER register on SBS, Inc. PMC-OctPro is located at |
| 962 | * offset 0x10 from the UART base, while UART_IER is defined as 1 |
| 963 | * in include/linux/serial_reg.h, |
| 964 | * see first lines of serial_in() and serial_out() in 8250.c |
| 965 | */ |
| 966 | |
Russell King | 1c7c1fe | 2005-07-27 11:31:19 +0100 | [diff] [blame] | 967 | static struct pciserial_board pci_boards[] __devinitdata = { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 968 | [pbn_default] = { |
| 969 | .flags = FL_BASE0, |
| 970 | .num_ports = 1, |
| 971 | .base_baud = 115200, |
| 972 | .uart_offset = 8, |
| 973 | }, |
| 974 | [pbn_b0_1_115200] = { |
| 975 | .flags = FL_BASE0, |
| 976 | .num_ports = 1, |
| 977 | .base_baud = 115200, |
| 978 | .uart_offset = 8, |
| 979 | }, |
| 980 | [pbn_b0_2_115200] = { |
| 981 | .flags = FL_BASE0, |
| 982 | .num_ports = 2, |
| 983 | .base_baud = 115200, |
| 984 | .uart_offset = 8, |
| 985 | }, |
| 986 | [pbn_b0_4_115200] = { |
| 987 | .flags = FL_BASE0, |
| 988 | .num_ports = 4, |
| 989 | .base_baud = 115200, |
| 990 | .uart_offset = 8, |
| 991 | }, |
| 992 | [pbn_b0_5_115200] = { |
| 993 | .flags = FL_BASE0, |
| 994 | .num_ports = 5, |
| 995 | .base_baud = 115200, |
| 996 | .uart_offset = 8, |
| 997 | }, |
| 998 | |
| 999 | [pbn_b0_1_921600] = { |
| 1000 | .flags = FL_BASE0, |
| 1001 | .num_ports = 1, |
| 1002 | .base_baud = 921600, |
| 1003 | .uart_offset = 8, |
| 1004 | }, |
| 1005 | [pbn_b0_2_921600] = { |
| 1006 | .flags = FL_BASE0, |
| 1007 | .num_ports = 2, |
| 1008 | .base_baud = 921600, |
| 1009 | .uart_offset = 8, |
| 1010 | }, |
| 1011 | [pbn_b0_4_921600] = { |
| 1012 | .flags = FL_BASE0, |
| 1013 | .num_ports = 4, |
| 1014 | .base_baud = 921600, |
| 1015 | .uart_offset = 8, |
| 1016 | }, |
David Ranson | db1de15 | 2005-07-27 11:43:55 -0700 | [diff] [blame] | 1017 | |
| 1018 | [pbn_b0_2_1130000] = { |
| 1019 | .flags = FL_BASE0, |
| 1020 | .num_ports = 2, |
| 1021 | .base_baud = 1130000, |
| 1022 | .uart_offset = 8, |
| 1023 | }, |
| 1024 | |
Andrey Panin | fbc0dc0 | 2005-07-18 11:38:09 +0100 | [diff] [blame] | 1025 | [pbn_b0_4_1152000] = { |
| 1026 | .flags = FL_BASE0, |
| 1027 | .num_ports = 4, |
| 1028 | .base_baud = 1152000, |
| 1029 | .uart_offset = 8, |
| 1030 | }, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1031 | |
| 1032 | [pbn_b0_bt_1_115200] = { |
| 1033 | .flags = FL_BASE0|FL_BASE_BARS, |
| 1034 | .num_ports = 1, |
| 1035 | .base_baud = 115200, |
| 1036 | .uart_offset = 8, |
| 1037 | }, |
| 1038 | [pbn_b0_bt_2_115200] = { |
| 1039 | .flags = FL_BASE0|FL_BASE_BARS, |
| 1040 | .num_ports = 2, |
| 1041 | .base_baud = 115200, |
| 1042 | .uart_offset = 8, |
| 1043 | }, |
| 1044 | [pbn_b0_bt_8_115200] = { |
| 1045 | .flags = FL_BASE0|FL_BASE_BARS, |
| 1046 | .num_ports = 8, |
| 1047 | .base_baud = 115200, |
| 1048 | .uart_offset = 8, |
| 1049 | }, |
| 1050 | |
| 1051 | [pbn_b0_bt_1_460800] = { |
| 1052 | .flags = FL_BASE0|FL_BASE_BARS, |
| 1053 | .num_ports = 1, |
| 1054 | .base_baud = 460800, |
| 1055 | .uart_offset = 8, |
| 1056 | }, |
| 1057 | [pbn_b0_bt_2_460800] = { |
| 1058 | .flags = FL_BASE0|FL_BASE_BARS, |
| 1059 | .num_ports = 2, |
| 1060 | .base_baud = 460800, |
| 1061 | .uart_offset = 8, |
| 1062 | }, |
| 1063 | [pbn_b0_bt_4_460800] = { |
| 1064 | .flags = FL_BASE0|FL_BASE_BARS, |
| 1065 | .num_ports = 4, |
| 1066 | .base_baud = 460800, |
| 1067 | .uart_offset = 8, |
| 1068 | }, |
| 1069 | |
| 1070 | [pbn_b0_bt_1_921600] = { |
| 1071 | .flags = FL_BASE0|FL_BASE_BARS, |
| 1072 | .num_ports = 1, |
| 1073 | .base_baud = 921600, |
| 1074 | .uart_offset = 8, |
| 1075 | }, |
| 1076 | [pbn_b0_bt_2_921600] = { |
| 1077 | .flags = FL_BASE0|FL_BASE_BARS, |
| 1078 | .num_ports = 2, |
| 1079 | .base_baud = 921600, |
| 1080 | .uart_offset = 8, |
| 1081 | }, |
| 1082 | [pbn_b0_bt_4_921600] = { |
| 1083 | .flags = FL_BASE0|FL_BASE_BARS, |
| 1084 | .num_ports = 4, |
| 1085 | .base_baud = 921600, |
| 1086 | .uart_offset = 8, |
| 1087 | }, |
| 1088 | [pbn_b0_bt_8_921600] = { |
| 1089 | .flags = FL_BASE0|FL_BASE_BARS, |
| 1090 | .num_ports = 8, |
| 1091 | .base_baud = 921600, |
| 1092 | .uart_offset = 8, |
| 1093 | }, |
| 1094 | |
| 1095 | [pbn_b1_1_115200] = { |
| 1096 | .flags = FL_BASE1, |
| 1097 | .num_ports = 1, |
| 1098 | .base_baud = 115200, |
| 1099 | .uart_offset = 8, |
| 1100 | }, |
| 1101 | [pbn_b1_2_115200] = { |
| 1102 | .flags = FL_BASE1, |
| 1103 | .num_ports = 2, |
| 1104 | .base_baud = 115200, |
| 1105 | .uart_offset = 8, |
| 1106 | }, |
| 1107 | [pbn_b1_4_115200] = { |
| 1108 | .flags = FL_BASE1, |
| 1109 | .num_ports = 4, |
| 1110 | .base_baud = 115200, |
| 1111 | .uart_offset = 8, |
| 1112 | }, |
| 1113 | [pbn_b1_8_115200] = { |
| 1114 | .flags = FL_BASE1, |
| 1115 | .num_ports = 8, |
| 1116 | .base_baud = 115200, |
| 1117 | .uart_offset = 8, |
| 1118 | }, |
| 1119 | |
| 1120 | [pbn_b1_1_921600] = { |
| 1121 | .flags = FL_BASE1, |
| 1122 | .num_ports = 1, |
| 1123 | .base_baud = 921600, |
| 1124 | .uart_offset = 8, |
| 1125 | }, |
| 1126 | [pbn_b1_2_921600] = { |
| 1127 | .flags = FL_BASE1, |
| 1128 | .num_ports = 2, |
| 1129 | .base_baud = 921600, |
| 1130 | .uart_offset = 8, |
| 1131 | }, |
| 1132 | [pbn_b1_4_921600] = { |
| 1133 | .flags = FL_BASE1, |
| 1134 | .num_ports = 4, |
| 1135 | .base_baud = 921600, |
| 1136 | .uart_offset = 8, |
| 1137 | }, |
| 1138 | [pbn_b1_8_921600] = { |
| 1139 | .flags = FL_BASE1, |
| 1140 | .num_ports = 8, |
| 1141 | .base_baud = 921600, |
| 1142 | .uart_offset = 8, |
| 1143 | }, |
| 1144 | |
| 1145 | [pbn_b1_bt_2_921600] = { |
| 1146 | .flags = FL_BASE1|FL_BASE_BARS, |
| 1147 | .num_ports = 2, |
| 1148 | .base_baud = 921600, |
| 1149 | .uart_offset = 8, |
| 1150 | }, |
| 1151 | |
| 1152 | [pbn_b1_1_1382400] = { |
| 1153 | .flags = FL_BASE1, |
| 1154 | .num_ports = 1, |
| 1155 | .base_baud = 1382400, |
| 1156 | .uart_offset = 8, |
| 1157 | }, |
| 1158 | [pbn_b1_2_1382400] = { |
| 1159 | .flags = FL_BASE1, |
| 1160 | .num_ports = 2, |
| 1161 | .base_baud = 1382400, |
| 1162 | .uart_offset = 8, |
| 1163 | }, |
| 1164 | [pbn_b1_4_1382400] = { |
| 1165 | .flags = FL_BASE1, |
| 1166 | .num_ports = 4, |
| 1167 | .base_baud = 1382400, |
| 1168 | .uart_offset = 8, |
| 1169 | }, |
| 1170 | [pbn_b1_8_1382400] = { |
| 1171 | .flags = FL_BASE1, |
| 1172 | .num_ports = 8, |
| 1173 | .base_baud = 1382400, |
| 1174 | .uart_offset = 8, |
| 1175 | }, |
| 1176 | |
| 1177 | [pbn_b2_1_115200] = { |
| 1178 | .flags = FL_BASE2, |
| 1179 | .num_ports = 1, |
| 1180 | .base_baud = 115200, |
| 1181 | .uart_offset = 8, |
| 1182 | }, |
| 1183 | [pbn_b2_8_115200] = { |
| 1184 | .flags = FL_BASE2, |
| 1185 | .num_ports = 8, |
| 1186 | .base_baud = 115200, |
| 1187 | .uart_offset = 8, |
| 1188 | }, |
| 1189 | |
| 1190 | [pbn_b2_1_460800] = { |
| 1191 | .flags = FL_BASE2, |
| 1192 | .num_ports = 1, |
| 1193 | .base_baud = 460800, |
| 1194 | .uart_offset = 8, |
| 1195 | }, |
| 1196 | [pbn_b2_4_460800] = { |
| 1197 | .flags = FL_BASE2, |
| 1198 | .num_ports = 4, |
| 1199 | .base_baud = 460800, |
| 1200 | .uart_offset = 8, |
| 1201 | }, |
| 1202 | [pbn_b2_8_460800] = { |
| 1203 | .flags = FL_BASE2, |
| 1204 | .num_ports = 8, |
| 1205 | .base_baud = 460800, |
| 1206 | .uart_offset = 8, |
| 1207 | }, |
| 1208 | [pbn_b2_16_460800] = { |
| 1209 | .flags = FL_BASE2, |
| 1210 | .num_ports = 16, |
| 1211 | .base_baud = 460800, |
| 1212 | .uart_offset = 8, |
| 1213 | }, |
| 1214 | |
| 1215 | [pbn_b2_1_921600] = { |
| 1216 | .flags = FL_BASE2, |
| 1217 | .num_ports = 1, |
| 1218 | .base_baud = 921600, |
| 1219 | .uart_offset = 8, |
| 1220 | }, |
| 1221 | [pbn_b2_4_921600] = { |
| 1222 | .flags = FL_BASE2, |
| 1223 | .num_ports = 4, |
| 1224 | .base_baud = 921600, |
| 1225 | .uart_offset = 8, |
| 1226 | }, |
| 1227 | [pbn_b2_8_921600] = { |
| 1228 | .flags = FL_BASE2, |
| 1229 | .num_ports = 8, |
| 1230 | .base_baud = 921600, |
| 1231 | .uart_offset = 8, |
| 1232 | }, |
| 1233 | |
| 1234 | [pbn_b2_bt_1_115200] = { |
| 1235 | .flags = FL_BASE2|FL_BASE_BARS, |
| 1236 | .num_ports = 1, |
| 1237 | .base_baud = 115200, |
| 1238 | .uart_offset = 8, |
| 1239 | }, |
| 1240 | [pbn_b2_bt_2_115200] = { |
| 1241 | .flags = FL_BASE2|FL_BASE_BARS, |
| 1242 | .num_ports = 2, |
| 1243 | .base_baud = 115200, |
| 1244 | .uart_offset = 8, |
| 1245 | }, |
| 1246 | [pbn_b2_bt_4_115200] = { |
| 1247 | .flags = FL_BASE2|FL_BASE_BARS, |
| 1248 | .num_ports = 4, |
| 1249 | .base_baud = 115200, |
| 1250 | .uart_offset = 8, |
| 1251 | }, |
| 1252 | |
| 1253 | [pbn_b2_bt_2_921600] = { |
| 1254 | .flags = FL_BASE2|FL_BASE_BARS, |
| 1255 | .num_ports = 2, |
| 1256 | .base_baud = 921600, |
| 1257 | .uart_offset = 8, |
| 1258 | }, |
| 1259 | [pbn_b2_bt_4_921600] = { |
| 1260 | .flags = FL_BASE2|FL_BASE_BARS, |
| 1261 | .num_ports = 4, |
| 1262 | .base_baud = 921600, |
| 1263 | .uart_offset = 8, |
| 1264 | }, |
| 1265 | |
| 1266 | [pbn_b3_4_115200] = { |
| 1267 | .flags = FL_BASE3, |
| 1268 | .num_ports = 4, |
| 1269 | .base_baud = 115200, |
| 1270 | .uart_offset = 8, |
| 1271 | }, |
| 1272 | [pbn_b3_8_115200] = { |
| 1273 | .flags = FL_BASE3, |
| 1274 | .num_ports = 8, |
| 1275 | .base_baud = 115200, |
| 1276 | .uart_offset = 8, |
| 1277 | }, |
| 1278 | |
| 1279 | /* |
| 1280 | * Entries following this are board-specific. |
| 1281 | */ |
| 1282 | |
| 1283 | /* |
| 1284 | * Panacom - IOMEM |
| 1285 | */ |
| 1286 | [pbn_panacom] = { |
| 1287 | .flags = FL_BASE2, |
| 1288 | .num_ports = 2, |
| 1289 | .base_baud = 921600, |
| 1290 | .uart_offset = 0x400, |
| 1291 | .reg_shift = 7, |
| 1292 | }, |
| 1293 | [pbn_panacom2] = { |
| 1294 | .flags = FL_BASE2|FL_BASE_BARS, |
| 1295 | .num_ports = 2, |
| 1296 | .base_baud = 921600, |
| 1297 | .uart_offset = 0x400, |
| 1298 | .reg_shift = 7, |
| 1299 | }, |
| 1300 | [pbn_panacom4] = { |
| 1301 | .flags = FL_BASE2|FL_BASE_BARS, |
| 1302 | .num_ports = 4, |
| 1303 | .base_baud = 921600, |
| 1304 | .uart_offset = 0x400, |
| 1305 | .reg_shift = 7, |
| 1306 | }, |
| 1307 | |
Bjorn Helgaas | add7b58 | 2005-10-24 22:11:57 +0100 | [diff] [blame] | 1308 | [pbn_exsys_4055] = { |
| 1309 | .flags = FL_BASE2, |
| 1310 | .num_ports = 4, |
| 1311 | .base_baud = 115200, |
| 1312 | .uart_offset = 8, |
| 1313 | }, |
| 1314 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1315 | /* I think this entry is broken - the first_offset looks wrong --rmk */ |
| 1316 | [pbn_plx_romulus] = { |
| 1317 | .flags = FL_BASE2, |
| 1318 | .num_ports = 4, |
| 1319 | .base_baud = 921600, |
| 1320 | .uart_offset = 8 << 2, |
| 1321 | .reg_shift = 2, |
| 1322 | .first_offset = 0x03, |
| 1323 | }, |
| 1324 | |
| 1325 | /* |
| 1326 | * This board uses the size of PCI Base region 0 to |
| 1327 | * signal now many ports are available |
| 1328 | */ |
| 1329 | [pbn_oxsemi] = { |
| 1330 | .flags = FL_BASE0|FL_REGION_SZ_CAP, |
| 1331 | .num_ports = 32, |
| 1332 | .base_baud = 115200, |
| 1333 | .uart_offset = 8, |
| 1334 | }, |
| 1335 | |
| 1336 | /* |
| 1337 | * EKF addition for i960 Boards form EKF with serial port. |
| 1338 | * Max 256 ports. |
| 1339 | */ |
| 1340 | [pbn_intel_i960] = { |
| 1341 | .flags = FL_BASE0, |
| 1342 | .num_ports = 32, |
| 1343 | .base_baud = 921600, |
| 1344 | .uart_offset = 8 << 2, |
| 1345 | .reg_shift = 2, |
| 1346 | .first_offset = 0x10000, |
| 1347 | }, |
| 1348 | [pbn_sgi_ioc3] = { |
| 1349 | .flags = FL_BASE0|FL_NOIRQ, |
| 1350 | .num_ports = 1, |
| 1351 | .base_baud = 458333, |
| 1352 | .uart_offset = 8, |
| 1353 | .reg_shift = 0, |
| 1354 | .first_offset = 0x20178, |
| 1355 | }, |
| 1356 | |
| 1357 | /* |
| 1358 | * NEC Vrc-5074 (Nile 4) builtin UART. |
| 1359 | */ |
| 1360 | [pbn_nec_nile4] = { |
| 1361 | .flags = FL_BASE0, |
| 1362 | .num_ports = 1, |
| 1363 | .base_baud = 520833, |
| 1364 | .uart_offset = 8 << 3, |
| 1365 | .reg_shift = 3, |
| 1366 | .first_offset = 0x300, |
| 1367 | }, |
| 1368 | |
| 1369 | /* |
| 1370 | * Computone - uses IOMEM. |
| 1371 | */ |
| 1372 | [pbn_computone_4] = { |
| 1373 | .flags = FL_BASE0, |
| 1374 | .num_ports = 4, |
| 1375 | .base_baud = 921600, |
| 1376 | .uart_offset = 0x40, |
| 1377 | .reg_shift = 2, |
| 1378 | .first_offset = 0x200, |
| 1379 | }, |
| 1380 | [pbn_computone_6] = { |
| 1381 | .flags = FL_BASE0, |
| 1382 | .num_ports = 6, |
| 1383 | .base_baud = 921600, |
| 1384 | .uart_offset = 0x40, |
| 1385 | .reg_shift = 2, |
| 1386 | .first_offset = 0x200, |
| 1387 | }, |
| 1388 | [pbn_computone_8] = { |
| 1389 | .flags = FL_BASE0, |
| 1390 | .num_ports = 8, |
| 1391 | .base_baud = 921600, |
| 1392 | .uart_offset = 0x40, |
| 1393 | .reg_shift = 2, |
| 1394 | .first_offset = 0x200, |
| 1395 | }, |
| 1396 | [pbn_sbsxrsio] = { |
| 1397 | .flags = FL_BASE0, |
| 1398 | .num_ports = 8, |
| 1399 | .base_baud = 460800, |
| 1400 | .uart_offset = 256, |
| 1401 | .reg_shift = 4, |
| 1402 | }, |
| 1403 | /* |
| 1404 | * Exar Corp. XR17C15[248] Dual/Quad/Octal UART |
| 1405 | * Only basic 16550A support. |
| 1406 | * XR17C15[24] are not tested, but they should work. |
| 1407 | */ |
| 1408 | [pbn_exar_XR17C152] = { |
| 1409 | .flags = FL_BASE0, |
| 1410 | .num_ports = 2, |
| 1411 | .base_baud = 921600, |
| 1412 | .uart_offset = 0x200, |
| 1413 | }, |
| 1414 | [pbn_exar_XR17C154] = { |
| 1415 | .flags = FL_BASE0, |
| 1416 | .num_ports = 4, |
| 1417 | .base_baud = 921600, |
| 1418 | .uart_offset = 0x200, |
| 1419 | }, |
| 1420 | [pbn_exar_XR17C158] = { |
| 1421 | .flags = FL_BASE0, |
| 1422 | .num_ports = 8, |
| 1423 | .base_baud = 921600, |
| 1424 | .uart_offset = 0x200, |
| 1425 | }, |
| 1426 | }; |
| 1427 | |
| 1428 | /* |
| 1429 | * Given a complete unknown PCI device, try to use some heuristics to |
| 1430 | * guess what the configuration might be, based on the pitiful PCI |
| 1431 | * serial specs. Returns 0 on success, 1 on failure. |
| 1432 | */ |
| 1433 | static int __devinit |
Russell King | 1c7c1fe | 2005-07-27 11:31:19 +0100 | [diff] [blame] | 1434 | serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1435 | { |
| 1436 | int num_iomem, num_port, first_port = -1, i; |
| 1437 | |
| 1438 | /* |
| 1439 | * If it is not a communications device or the programming |
| 1440 | * interface is greater than 6, give up. |
| 1441 | * |
| 1442 | * (Should we try to make guesses for multiport serial devices |
| 1443 | * later?) |
| 1444 | */ |
| 1445 | if ((((dev->class >> 8) != PCI_CLASS_COMMUNICATION_SERIAL) && |
| 1446 | ((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MODEM)) || |
| 1447 | (dev->class & 0xff) > 6) |
| 1448 | return -ENODEV; |
| 1449 | |
| 1450 | num_iomem = num_port = 0; |
| 1451 | for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) { |
| 1452 | if (pci_resource_flags(dev, i) & IORESOURCE_IO) { |
| 1453 | num_port++; |
| 1454 | if (first_port == -1) |
| 1455 | first_port = i; |
| 1456 | } |
| 1457 | if (pci_resource_flags(dev, i) & IORESOURCE_MEM) |
| 1458 | num_iomem++; |
| 1459 | } |
| 1460 | |
| 1461 | /* |
| 1462 | * If there is 1 or 0 iomem regions, and exactly one port, |
| 1463 | * use it. We guess the number of ports based on the IO |
| 1464 | * region size. |
| 1465 | */ |
| 1466 | if (num_iomem <= 1 && num_port == 1) { |
| 1467 | board->flags = first_port; |
| 1468 | board->num_ports = pci_resource_len(dev, first_port) / 8; |
| 1469 | return 0; |
| 1470 | } |
| 1471 | |
| 1472 | /* |
| 1473 | * Now guess if we've got a board which indexes by BARs. |
| 1474 | * Each IO BAR should be 8 bytes, and they should follow |
| 1475 | * consecutively. |
| 1476 | */ |
| 1477 | first_port = -1; |
| 1478 | num_port = 0; |
| 1479 | for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) { |
| 1480 | if (pci_resource_flags(dev, i) & IORESOURCE_IO && |
| 1481 | pci_resource_len(dev, i) == 8 && |
| 1482 | (first_port == -1 || (first_port + num_port) == i)) { |
| 1483 | num_port++; |
| 1484 | if (first_port == -1) |
| 1485 | first_port = i; |
| 1486 | } |
| 1487 | } |
| 1488 | |
| 1489 | if (num_port > 1) { |
| 1490 | board->flags = first_port | FL_BASE_BARS; |
| 1491 | board->num_ports = num_port; |
| 1492 | return 0; |
| 1493 | } |
| 1494 | |
| 1495 | return -ENODEV; |
| 1496 | } |
| 1497 | |
| 1498 | static inline int |
Russell King | 1c7c1fe | 2005-07-27 11:31:19 +0100 | [diff] [blame] | 1499 | serial_pci_matches(struct pciserial_board *board, |
| 1500 | struct pciserial_board *guessed) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1501 | { |
| 1502 | return |
| 1503 | board->num_ports == guessed->num_ports && |
| 1504 | board->base_baud == guessed->base_baud && |
| 1505 | board->uart_offset == guessed->uart_offset && |
| 1506 | board->reg_shift == guessed->reg_shift && |
| 1507 | board->first_offset == guessed->first_offset; |
| 1508 | } |
| 1509 | |
Russell King | 241fc43 | 2005-07-27 11:35:54 +0100 | [diff] [blame] | 1510 | struct serial_private * |
| 1511 | pciserial_init_ports(struct pci_dev *dev, struct pciserial_board *board) |
| 1512 | { |
| 1513 | struct uart_port serial_port; |
| 1514 | struct serial_private *priv; |
| 1515 | struct pci_serial_quirk *quirk; |
| 1516 | int rc, nr_ports, i; |
| 1517 | |
| 1518 | nr_ports = board->num_ports; |
| 1519 | |
| 1520 | /* |
| 1521 | * Find an init and setup quirks. |
| 1522 | */ |
| 1523 | quirk = find_quirk(dev); |
| 1524 | |
| 1525 | /* |
| 1526 | * Run the new-style initialization function. |
| 1527 | * The initialization function returns: |
| 1528 | * <0 - error |
| 1529 | * 0 - use board->num_ports |
| 1530 | * >0 - number of ports |
| 1531 | */ |
| 1532 | if (quirk->init) { |
| 1533 | rc = quirk->init(dev); |
| 1534 | if (rc < 0) { |
| 1535 | priv = ERR_PTR(rc); |
| 1536 | goto err_out; |
| 1537 | } |
| 1538 | if (rc) |
| 1539 | nr_ports = rc; |
| 1540 | } |
| 1541 | |
| 1542 | priv = kmalloc(sizeof(struct serial_private) + |
| 1543 | sizeof(unsigned int) * nr_ports, |
| 1544 | GFP_KERNEL); |
| 1545 | if (!priv) { |
| 1546 | priv = ERR_PTR(-ENOMEM); |
| 1547 | goto err_deinit; |
| 1548 | } |
| 1549 | |
| 1550 | memset(priv, 0, sizeof(struct serial_private) + |
| 1551 | sizeof(unsigned int) * nr_ports); |
| 1552 | |
| 1553 | priv->dev = dev; |
| 1554 | priv->quirk = quirk; |
| 1555 | |
| 1556 | memset(&serial_port, 0, sizeof(struct uart_port)); |
| 1557 | serial_port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; |
| 1558 | serial_port.uartclk = board->base_baud * 16; |
| 1559 | serial_port.irq = get_pci_irq(dev, board); |
| 1560 | serial_port.dev = &dev->dev; |
| 1561 | |
| 1562 | for (i = 0; i < nr_ports; i++) { |
| 1563 | if (quirk->setup(priv, board, &serial_port, i)) |
| 1564 | break; |
| 1565 | |
| 1566 | #ifdef SERIAL_DEBUG_PCI |
| 1567 | printk("Setup PCI port: port %x, irq %d, type %d\n", |
| 1568 | serial_port.iobase, serial_port.irq, serial_port.iotype); |
| 1569 | #endif |
| 1570 | |
| 1571 | priv->line[i] = serial8250_register_port(&serial_port); |
| 1572 | if (priv->line[i] < 0) { |
| 1573 | printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), priv->line[i]); |
| 1574 | break; |
| 1575 | } |
| 1576 | } |
| 1577 | |
| 1578 | priv->nr = i; |
| 1579 | |
| 1580 | return priv; |
| 1581 | |
| 1582 | err_deinit: |
| 1583 | if (quirk->exit) |
| 1584 | quirk->exit(dev); |
| 1585 | err_out: |
| 1586 | return priv; |
| 1587 | } |
| 1588 | EXPORT_SYMBOL_GPL(pciserial_init_ports); |
| 1589 | |
| 1590 | void pciserial_remove_ports(struct serial_private *priv) |
| 1591 | { |
| 1592 | struct pci_serial_quirk *quirk; |
| 1593 | int i; |
| 1594 | |
| 1595 | for (i = 0; i < priv->nr; i++) |
| 1596 | serial8250_unregister_port(priv->line[i]); |
| 1597 | |
| 1598 | for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) { |
| 1599 | if (priv->remapped_bar[i]) |
| 1600 | iounmap(priv->remapped_bar[i]); |
| 1601 | priv->remapped_bar[i] = NULL; |
| 1602 | } |
| 1603 | |
| 1604 | /* |
| 1605 | * Find the exit quirks. |
| 1606 | */ |
| 1607 | quirk = find_quirk(priv->dev); |
| 1608 | if (quirk->exit) |
| 1609 | quirk->exit(priv->dev); |
| 1610 | |
| 1611 | kfree(priv); |
| 1612 | } |
| 1613 | EXPORT_SYMBOL_GPL(pciserial_remove_ports); |
| 1614 | |
| 1615 | void pciserial_suspend_ports(struct serial_private *priv) |
| 1616 | { |
| 1617 | int i; |
| 1618 | |
| 1619 | for (i = 0; i < priv->nr; i++) |
| 1620 | if (priv->line[i] >= 0) |
| 1621 | serial8250_suspend_port(priv->line[i]); |
| 1622 | } |
| 1623 | EXPORT_SYMBOL_GPL(pciserial_suspend_ports); |
| 1624 | |
| 1625 | void pciserial_resume_ports(struct serial_private *priv) |
| 1626 | { |
| 1627 | int i; |
| 1628 | |
| 1629 | /* |
| 1630 | * Ensure that the board is correctly configured. |
| 1631 | */ |
| 1632 | if (priv->quirk->init) |
| 1633 | priv->quirk->init(priv->dev); |
| 1634 | |
| 1635 | for (i = 0; i < priv->nr; i++) |
| 1636 | if (priv->line[i] >= 0) |
| 1637 | serial8250_resume_port(priv->line[i]); |
| 1638 | } |
| 1639 | EXPORT_SYMBOL_GPL(pciserial_resume_ports); |
| 1640 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1641 | /* |
| 1642 | * Probe one serial board. Unfortunately, there is no rhyme nor reason |
| 1643 | * to the arrangement of serial ports on a PCI card. |
| 1644 | */ |
| 1645 | static int __devinit |
| 1646 | pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) |
| 1647 | { |
| 1648 | struct serial_private *priv; |
Russell King | 1c7c1fe | 2005-07-27 11:31:19 +0100 | [diff] [blame] | 1649 | struct pciserial_board *board, tmp; |
Russell King | 241fc43 | 2005-07-27 11:35:54 +0100 | [diff] [blame] | 1650 | int rc; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1651 | |
| 1652 | if (ent->driver_data >= ARRAY_SIZE(pci_boards)) { |
| 1653 | printk(KERN_ERR "pci_init_one: invalid driver_data: %ld\n", |
| 1654 | ent->driver_data); |
| 1655 | return -EINVAL; |
| 1656 | } |
| 1657 | |
| 1658 | board = &pci_boards[ent->driver_data]; |
| 1659 | |
| 1660 | rc = pci_enable_device(dev); |
| 1661 | if (rc) |
| 1662 | return rc; |
| 1663 | |
| 1664 | if (ent->driver_data == pbn_default) { |
| 1665 | /* |
| 1666 | * Use a copy of the pci_board entry for this; |
| 1667 | * avoid changing entries in the table. |
| 1668 | */ |
Russell King | 1c7c1fe | 2005-07-27 11:31:19 +0100 | [diff] [blame] | 1669 | memcpy(&tmp, board, sizeof(struct pciserial_board)); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1670 | board = &tmp; |
| 1671 | |
| 1672 | /* |
| 1673 | * We matched one of our class entries. Try to |
| 1674 | * determine the parameters of this board. |
| 1675 | */ |
| 1676 | rc = serial_pci_guess_board(dev, board); |
| 1677 | if (rc) |
| 1678 | goto disable; |
| 1679 | } else { |
| 1680 | /* |
| 1681 | * We matched an explicit entry. If we are able to |
| 1682 | * detect this boards settings with our heuristic, |
| 1683 | * then we no longer need this entry. |
| 1684 | */ |
Russell King | 1c7c1fe | 2005-07-27 11:31:19 +0100 | [diff] [blame] | 1685 | memcpy(&tmp, &pci_boards[pbn_default], |
| 1686 | sizeof(struct pciserial_board)); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1687 | rc = serial_pci_guess_board(dev, &tmp); |
| 1688 | if (rc == 0 && serial_pci_matches(board, &tmp)) |
| 1689 | moan_device("Redundant entry in serial pci_table.", |
| 1690 | dev); |
| 1691 | } |
| 1692 | |
Russell King | 241fc43 | 2005-07-27 11:35:54 +0100 | [diff] [blame] | 1693 | priv = pciserial_init_ports(dev, board); |
| 1694 | if (!IS_ERR(priv)) { |
| 1695 | pci_set_drvdata(dev, priv); |
| 1696 | return 0; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1697 | } |
| 1698 | |
Russell King | 241fc43 | 2005-07-27 11:35:54 +0100 | [diff] [blame] | 1699 | rc = PTR_ERR(priv); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1700 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1701 | disable: |
| 1702 | pci_disable_device(dev); |
| 1703 | return rc; |
| 1704 | } |
| 1705 | |
| 1706 | static void __devexit pciserial_remove_one(struct pci_dev *dev) |
| 1707 | { |
| 1708 | struct serial_private *priv = pci_get_drvdata(dev); |
| 1709 | |
| 1710 | pci_set_drvdata(dev, NULL); |
| 1711 | |
Russell King | 241fc43 | 2005-07-27 11:35:54 +0100 | [diff] [blame] | 1712 | pciserial_remove_ports(priv); |
Russell King | 056a876 | 2005-07-22 10:15:04 +0100 | [diff] [blame] | 1713 | |
| 1714 | pci_disable_device(dev); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1715 | } |
| 1716 | |
| 1717 | static int pciserial_suspend_one(struct pci_dev *dev, pm_message_t state) |
| 1718 | { |
| 1719 | struct serial_private *priv = pci_get_drvdata(dev); |
| 1720 | |
Russell King | 241fc43 | 2005-07-27 11:35:54 +0100 | [diff] [blame] | 1721 | if (priv) |
| 1722 | pciserial_suspend_ports(priv); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1723 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1724 | pci_save_state(dev); |
| 1725 | pci_set_power_state(dev, pci_choose_state(dev, state)); |
| 1726 | return 0; |
| 1727 | } |
| 1728 | |
| 1729 | static int pciserial_resume_one(struct pci_dev *dev) |
| 1730 | { |
| 1731 | struct serial_private *priv = pci_get_drvdata(dev); |
| 1732 | |
| 1733 | pci_set_power_state(dev, PCI_D0); |
| 1734 | pci_restore_state(dev); |
| 1735 | |
| 1736 | if (priv) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1737 | /* |
| 1738 | * The device may have been disabled. Re-enable it. |
| 1739 | */ |
| 1740 | pci_enable_device(dev); |
| 1741 | |
Russell King | 241fc43 | 2005-07-27 11:35:54 +0100 | [diff] [blame] | 1742 | pciserial_resume_ports(priv); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1743 | } |
| 1744 | return 0; |
| 1745 | } |
| 1746 | |
| 1747 | static struct pci_device_id serial_pci_tbl[] = { |
| 1748 | { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, |
| 1749 | PCI_SUBVENDOR_ID_CONNECT_TECH, |
| 1750 | PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0, |
| 1751 | pbn_b1_8_1382400 }, |
| 1752 | { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, |
| 1753 | PCI_SUBVENDOR_ID_CONNECT_TECH, |
| 1754 | PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0, |
| 1755 | pbn_b1_4_1382400 }, |
| 1756 | { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, |
| 1757 | PCI_SUBVENDOR_ID_CONNECT_TECH, |
| 1758 | PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0, |
| 1759 | pbn_b1_2_1382400 }, |
| 1760 | { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, |
| 1761 | PCI_SUBVENDOR_ID_CONNECT_TECH, |
| 1762 | PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0, |
| 1763 | pbn_b1_8_1382400 }, |
| 1764 | { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, |
| 1765 | PCI_SUBVENDOR_ID_CONNECT_TECH, |
| 1766 | PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0, |
| 1767 | pbn_b1_4_1382400 }, |
| 1768 | { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, |
| 1769 | PCI_SUBVENDOR_ID_CONNECT_TECH, |
| 1770 | PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0, |
| 1771 | pbn_b1_2_1382400 }, |
| 1772 | { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, |
| 1773 | PCI_SUBVENDOR_ID_CONNECT_TECH, |
| 1774 | PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485, 0, 0, |
| 1775 | pbn_b1_8_921600 }, |
| 1776 | { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, |
| 1777 | PCI_SUBVENDOR_ID_CONNECT_TECH, |
| 1778 | PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_4_4, 0, 0, |
| 1779 | pbn_b1_8_921600 }, |
| 1780 | { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, |
| 1781 | PCI_SUBVENDOR_ID_CONNECT_TECH, |
| 1782 | PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485, 0, 0, |
| 1783 | pbn_b1_4_921600 }, |
| 1784 | { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, |
| 1785 | PCI_SUBVENDOR_ID_CONNECT_TECH, |
| 1786 | PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485_2_2, 0, 0, |
| 1787 | pbn_b1_4_921600 }, |
| 1788 | { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, |
| 1789 | PCI_SUBVENDOR_ID_CONNECT_TECH, |
| 1790 | PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_485, 0, 0, |
| 1791 | pbn_b1_2_921600 }, |
| 1792 | { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, |
| 1793 | PCI_SUBVENDOR_ID_CONNECT_TECH, |
| 1794 | PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_2_6, 0, 0, |
| 1795 | pbn_b1_8_921600 }, |
| 1796 | { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, |
| 1797 | PCI_SUBVENDOR_ID_CONNECT_TECH, |
| 1798 | PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1, 0, 0, |
| 1799 | pbn_b1_8_921600 }, |
| 1800 | { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, |
| 1801 | PCI_SUBVENDOR_ID_CONNECT_TECH, |
| 1802 | PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1, 0, 0, |
| 1803 | pbn_b1_4_921600 }, |
| 1804 | |
| 1805 | { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_U530, |
| 1806 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 1807 | pbn_b2_bt_1_115200 }, |
| 1808 | { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM2, |
| 1809 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 1810 | pbn_b2_bt_2_115200 }, |
| 1811 | { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM422, |
| 1812 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 1813 | pbn_b2_bt_4_115200 }, |
| 1814 | { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM232, |
| 1815 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 1816 | pbn_b2_bt_2_115200 }, |
| 1817 | { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM4, |
| 1818 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 1819 | pbn_b2_bt_4_115200 }, |
| 1820 | { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM8, |
| 1821 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 1822 | pbn_b2_8_115200 }, |
| 1823 | { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM8, |
| 1824 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 1825 | pbn_b2_8_115200 }, |
| 1826 | |
| 1827 | { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_GTEK_SERIAL2, |
| 1828 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 1829 | pbn_b2_bt_2_115200 }, |
| 1830 | { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM200, |
| 1831 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 1832 | pbn_b2_bt_2_921600 }, |
| 1833 | /* |
| 1834 | * VScom SPCOM800, from sl@s.pl |
| 1835 | */ |
| 1836 | { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM800, |
| 1837 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 1838 | pbn_b2_8_921600 }, |
| 1839 | { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_1077, |
| 1840 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 1841 | pbn_b2_4_921600 }, |
| 1842 | { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, |
| 1843 | PCI_SUBVENDOR_ID_KEYSPAN, |
| 1844 | PCI_SUBDEVICE_ID_KEYSPAN_SX2, 0, 0, |
| 1845 | pbn_panacom }, |
| 1846 | { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_QUADMODEM, |
| 1847 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 1848 | pbn_panacom4 }, |
| 1849 | { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_DUALMODEM, |
| 1850 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 1851 | pbn_panacom2 }, |
| 1852 | { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, |
| 1853 | PCI_SUBVENDOR_ID_CHASE_PCIFAST, |
| 1854 | PCI_SUBDEVICE_ID_CHASE_PCIFAST4, 0, 0, |
| 1855 | pbn_b2_4_460800 }, |
| 1856 | { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, |
| 1857 | PCI_SUBVENDOR_ID_CHASE_PCIFAST, |
| 1858 | PCI_SUBDEVICE_ID_CHASE_PCIFAST8, 0, 0, |
| 1859 | pbn_b2_8_460800 }, |
| 1860 | { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, |
| 1861 | PCI_SUBVENDOR_ID_CHASE_PCIFAST, |
| 1862 | PCI_SUBDEVICE_ID_CHASE_PCIFAST16, 0, 0, |
| 1863 | pbn_b2_16_460800 }, |
| 1864 | { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, |
| 1865 | PCI_SUBVENDOR_ID_CHASE_PCIFAST, |
| 1866 | PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC, 0, 0, |
| 1867 | pbn_b2_16_460800 }, |
| 1868 | { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, |
| 1869 | PCI_SUBVENDOR_ID_CHASE_PCIRAS, |
| 1870 | PCI_SUBDEVICE_ID_CHASE_PCIRAS4, 0, 0, |
| 1871 | pbn_b2_4_460800 }, |
| 1872 | { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, |
| 1873 | PCI_SUBVENDOR_ID_CHASE_PCIRAS, |
| 1874 | PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0, |
| 1875 | pbn_b2_8_460800 }, |
Bjorn Helgaas | add7b58 | 2005-10-24 22:11:57 +0100 | [diff] [blame] | 1876 | { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, |
| 1877 | PCI_SUBVENDOR_ID_EXSYS, |
| 1878 | PCI_SUBDEVICE_ID_EXSYS_4055, 0, 0, |
| 1879 | pbn_exsys_4055 }, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1880 | /* |
| 1881 | * Megawolf Romulus PCI Serial Card, from Mike Hudson |
| 1882 | * (Exoray@isys.ca) |
| 1883 | */ |
| 1884 | { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_ROMULUS, |
| 1885 | 0x10b5, 0x106a, 0, 0, |
| 1886 | pbn_plx_romulus }, |
| 1887 | { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSC100, |
| 1888 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 1889 | pbn_b1_4_115200 }, |
| 1890 | { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC100, |
| 1891 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 1892 | pbn_b1_2_115200 }, |
| 1893 | { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100D, |
| 1894 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 1895 | pbn_b1_8_115200 }, |
| 1896 | { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100M, |
| 1897 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 1898 | pbn_b1_8_115200 }, |
| 1899 | { PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_OXSEMI_16PCI954, |
| 1900 | PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4, 0, 0, |
| 1901 | pbn_b0_4_921600 }, |
| 1902 | { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, |
Andrey Panin | fbc0dc0 | 2005-07-18 11:38:09 +0100 | [diff] [blame] | 1903 | PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL, 0, 0, |
| 1904 | pbn_b0_4_1152000 }, |
David Ranson | db1de15 | 2005-07-27 11:43:55 -0700 | [diff] [blame] | 1905 | |
| 1906 | /* |
| 1907 | * The below card is a little controversial since it is the |
| 1908 | * subject of a PCI vendor/device ID clash. (See |
| 1909 | * www.ussg.iu.edu/hypermail/linux/kernel/0303.1/0516.html). |
| 1910 | * For now just used the hex ID 0x950a. |
| 1911 | */ |
| 1912 | { PCI_VENDOR_ID_OXSEMI, 0x950a, |
| 1913 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 1914 | pbn_b0_2_1130000 }, |
Andrey Panin | fbc0dc0 | 2005-07-18 11:38:09 +0100 | [diff] [blame] | 1915 | { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1916 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 1917 | pbn_b0_4_115200 }, |
| 1918 | { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952, |
| 1919 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 1920 | pbn_b0_bt_2_921600 }, |
| 1921 | |
| 1922 | /* |
| 1923 | * SBS Technologies, Inc. P-Octal and PMC-OCTPRO cards, |
| 1924 | * from skokodyn@yahoo.com |
| 1925 | */ |
| 1926 | { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, |
| 1927 | PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO232, 0, 0, |
| 1928 | pbn_sbsxrsio }, |
| 1929 | { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, |
| 1930 | PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO422, 0, 0, |
| 1931 | pbn_sbsxrsio }, |
| 1932 | { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, |
| 1933 | PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL232, 0, 0, |
| 1934 | pbn_sbsxrsio }, |
| 1935 | { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, |
| 1936 | PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL422, 0, 0, |
| 1937 | pbn_sbsxrsio }, |
| 1938 | |
| 1939 | /* |
| 1940 | * Digitan DS560-558, from jimd@esoft.com |
| 1941 | */ |
| 1942 | { PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_ATT_VENUS_MODEM, |
| 1943 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 1944 | pbn_b1_1_115200 }, |
| 1945 | |
| 1946 | /* |
| 1947 | * Titan Electronic cards |
| 1948 | * The 400L and 800L have a custom setup quirk. |
| 1949 | */ |
| 1950 | { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100, |
| 1951 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 1952 | pbn_b0_1_921600 }, |
| 1953 | { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200, |
| 1954 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 1955 | pbn_b0_2_921600 }, |
| 1956 | { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400, |
| 1957 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 1958 | pbn_b0_4_921600 }, |
| 1959 | { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800B, |
| 1960 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 1961 | pbn_b0_4_921600 }, |
| 1962 | { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100L, |
| 1963 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 1964 | pbn_b1_1_921600 }, |
| 1965 | { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200L, |
| 1966 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 1967 | pbn_b1_bt_2_921600 }, |
| 1968 | { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400L, |
| 1969 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 1970 | pbn_b0_bt_4_921600 }, |
| 1971 | { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800L, |
| 1972 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 1973 | pbn_b0_bt_8_921600 }, |
| 1974 | |
| 1975 | { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_550, |
| 1976 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 1977 | pbn_b2_1_460800 }, |
| 1978 | { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_650, |
| 1979 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 1980 | pbn_b2_1_460800 }, |
| 1981 | { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_850, |
| 1982 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 1983 | pbn_b2_1_460800 }, |
| 1984 | { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_550, |
| 1985 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 1986 | pbn_b2_bt_2_921600 }, |
| 1987 | { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_650, |
| 1988 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 1989 | pbn_b2_bt_2_921600 }, |
| 1990 | { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_850, |
| 1991 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 1992 | pbn_b2_bt_2_921600 }, |
| 1993 | { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_550, |
| 1994 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 1995 | pbn_b2_bt_4_921600 }, |
| 1996 | { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_650, |
| 1997 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 1998 | pbn_b2_bt_4_921600 }, |
| 1999 | { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_850, |
| 2000 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 2001 | pbn_b2_bt_4_921600 }, |
| 2002 | { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_550, |
| 2003 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 2004 | pbn_b0_1_921600 }, |
| 2005 | { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_650, |
| 2006 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 2007 | pbn_b0_1_921600 }, |
| 2008 | { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_850, |
| 2009 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 2010 | pbn_b0_1_921600 }, |
| 2011 | { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_550, |
| 2012 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 2013 | pbn_b0_bt_2_921600 }, |
| 2014 | { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_650, |
| 2015 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 2016 | pbn_b0_bt_2_921600 }, |
| 2017 | { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_850, |
| 2018 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 2019 | pbn_b0_bt_2_921600 }, |
| 2020 | { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_550, |
| 2021 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 2022 | pbn_b0_bt_4_921600 }, |
| 2023 | { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_650, |
| 2024 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 2025 | pbn_b0_bt_4_921600 }, |
| 2026 | { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_850, |
| 2027 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 2028 | pbn_b0_bt_4_921600 }, |
| 2029 | |
| 2030 | /* |
| 2031 | * Computone devices submitted by Doug McNash dmcnash@computone.com |
| 2032 | */ |
| 2033 | { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG, |
| 2034 | PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG4, |
| 2035 | 0, 0, pbn_computone_4 }, |
| 2036 | { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG, |
| 2037 | PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG8, |
| 2038 | 0, 0, pbn_computone_8 }, |
| 2039 | { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG, |
| 2040 | PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG6, |
| 2041 | 0, 0, pbn_computone_6 }, |
| 2042 | |
| 2043 | { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI95N, |
| 2044 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 2045 | pbn_oxsemi }, |
| 2046 | { PCI_VENDOR_ID_TIMEDIA, PCI_DEVICE_ID_TIMEDIA_1889, |
| 2047 | PCI_VENDOR_ID_TIMEDIA, PCI_ANY_ID, 0, 0, |
| 2048 | pbn_b0_bt_1_921600 }, |
| 2049 | |
| 2050 | /* |
| 2051 | * AFAVLAB serial card, from Harald Welte <laforge@gnumonks.org> |
| 2052 | */ |
| 2053 | { PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P028, |
| 2054 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 2055 | pbn_b0_bt_8_115200 }, |
| 2056 | { PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P030, |
| 2057 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 2058 | pbn_b0_bt_8_115200 }, |
| 2059 | |
| 2060 | { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_DSERIAL, |
| 2061 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 2062 | pbn_b0_bt_2_115200 }, |
| 2063 | { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_A, |
| 2064 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 2065 | pbn_b0_bt_2_115200 }, |
| 2066 | { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_B, |
| 2067 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 2068 | pbn_b0_bt_2_115200 }, |
| 2069 | { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_A, |
| 2070 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 2071 | pbn_b0_bt_4_460800 }, |
| 2072 | { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_B, |
| 2073 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 2074 | pbn_b0_bt_4_460800 }, |
| 2075 | { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_PLUS, |
| 2076 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 2077 | pbn_b0_bt_2_460800 }, |
| 2078 | { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_A, |
| 2079 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 2080 | pbn_b0_bt_2_460800 }, |
| 2081 | { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_B, |
| 2082 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 2083 | pbn_b0_bt_2_460800 }, |
| 2084 | { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_SSERIAL, |
| 2085 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 2086 | pbn_b0_bt_1_115200 }, |
| 2087 | { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_650, |
| 2088 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 2089 | pbn_b0_bt_1_460800 }, |
| 2090 | |
| 2091 | /* |
| 2092 | * Dell Remote Access Card 4 - Tim_T_Murphy@Dell.com |
| 2093 | */ |
| 2094 | { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RAC4, |
| 2095 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 2096 | pbn_b1_1_1382400 }, |
| 2097 | |
| 2098 | /* |
| 2099 | * Dell Remote Access Card III - Tim_T_Murphy@Dell.com |
| 2100 | */ |
| 2101 | { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RACIII, |
| 2102 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 2103 | pbn_b1_1_1382400 }, |
| 2104 | |
| 2105 | /* |
| 2106 | * RAStel 2 port modem, gerg@moreton.com.au |
| 2107 | */ |
| 2108 | { PCI_VENDOR_ID_MORETON, PCI_DEVICE_ID_RASTEL_2PORT, |
| 2109 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 2110 | pbn_b2_bt_2_115200 }, |
| 2111 | |
| 2112 | /* |
| 2113 | * EKF addition for i960 Boards form EKF with serial port |
| 2114 | */ |
| 2115 | { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80960_RP, |
| 2116 | 0xE4BF, PCI_ANY_ID, 0, 0, |
| 2117 | pbn_intel_i960 }, |
| 2118 | |
| 2119 | /* |
| 2120 | * Xircom Cardbus/Ethernet combos |
| 2121 | */ |
| 2122 | { PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_X3201_MDM, |
| 2123 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 2124 | pbn_b0_1_115200 }, |
| 2125 | /* |
| 2126 | * Xircom RBM56G cardbus modem - Dirk Arnold (temp entry) |
| 2127 | */ |
| 2128 | { PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_RBM56G, |
| 2129 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 2130 | pbn_b0_1_115200 }, |
| 2131 | |
| 2132 | /* |
| 2133 | * Untested PCI modems, sent in from various folks... |
| 2134 | */ |
| 2135 | |
| 2136 | /* |
| 2137 | * Elsa Model 56K PCI Modem, from Andreas Rath <arh@01019freenet.de> |
| 2138 | */ |
| 2139 | { PCI_VENDOR_ID_ROCKWELL, 0x1004, |
| 2140 | 0x1048, 0x1500, 0, 0, |
| 2141 | pbn_b1_1_115200 }, |
| 2142 | |
| 2143 | { PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3, |
| 2144 | 0xFF00, 0, 0, 0, |
| 2145 | pbn_sgi_ioc3 }, |
| 2146 | |
| 2147 | /* |
| 2148 | * HP Diva card |
| 2149 | */ |
| 2150 | { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA, |
| 2151 | PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_RMP3, 0, 0, |
| 2152 | pbn_b1_1_115200 }, |
| 2153 | { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA, |
| 2154 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 2155 | pbn_b0_5_115200 }, |
| 2156 | { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_AUX, |
| 2157 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 2158 | pbn_b2_1_115200 }, |
| 2159 | |
| 2160 | /* |
| 2161 | * NEC Vrc-5074 (Nile 4) builtin UART. |
| 2162 | */ |
| 2163 | { PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_NILE4, |
| 2164 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 2165 | pbn_nec_nile4 }, |
| 2166 | |
| 2167 | { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM4, |
| 2168 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 2169 | pbn_b3_4_115200 }, |
| 2170 | { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM8, |
| 2171 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 2172 | pbn_b3_8_115200 }, |
| 2173 | |
| 2174 | /* |
| 2175 | * Exar Corp. XR17C15[248] Dual/Quad/Octal UART |
| 2176 | */ |
| 2177 | { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, |
| 2178 | PCI_ANY_ID, PCI_ANY_ID, |
| 2179 | 0, |
| 2180 | 0, pbn_exar_XR17C152 }, |
| 2181 | { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154, |
| 2182 | PCI_ANY_ID, PCI_ANY_ID, |
| 2183 | 0, |
| 2184 | 0, pbn_exar_XR17C154 }, |
| 2185 | { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158, |
| 2186 | PCI_ANY_ID, PCI_ANY_ID, |
| 2187 | 0, |
| 2188 | 0, pbn_exar_XR17C158 }, |
| 2189 | |
| 2190 | /* |
| 2191 | * Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke) |
| 2192 | */ |
| 2193 | { PCI_VENDOR_ID_TOPIC, PCI_DEVICE_ID_TOPIC_TP560, |
| 2194 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 2195 | pbn_b0_1_115200 }, |
| 2196 | |
| 2197 | /* |
| 2198 | * These entries match devices with class COMMUNICATION_SERIAL, |
| 2199 | * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL |
| 2200 | */ |
| 2201 | { PCI_ANY_ID, PCI_ANY_ID, |
| 2202 | PCI_ANY_ID, PCI_ANY_ID, |
| 2203 | PCI_CLASS_COMMUNICATION_SERIAL << 8, |
| 2204 | 0xffff00, pbn_default }, |
| 2205 | { PCI_ANY_ID, PCI_ANY_ID, |
| 2206 | PCI_ANY_ID, PCI_ANY_ID, |
| 2207 | PCI_CLASS_COMMUNICATION_MODEM << 8, |
| 2208 | 0xffff00, pbn_default }, |
| 2209 | { PCI_ANY_ID, PCI_ANY_ID, |
| 2210 | PCI_ANY_ID, PCI_ANY_ID, |
| 2211 | PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, |
| 2212 | 0xffff00, pbn_default }, |
| 2213 | { 0, } |
| 2214 | }; |
| 2215 | |
| 2216 | static struct pci_driver serial_pci_driver = { |
| 2217 | .name = "serial", |
| 2218 | .probe = pciserial_init_one, |
| 2219 | .remove = __devexit_p(pciserial_remove_one), |
| 2220 | .suspend = pciserial_suspend_one, |
| 2221 | .resume = pciserial_resume_one, |
| 2222 | .id_table = serial_pci_tbl, |
| 2223 | }; |
| 2224 | |
| 2225 | static int __init serial8250_pci_init(void) |
| 2226 | { |
| 2227 | return pci_register_driver(&serial_pci_driver); |
| 2228 | } |
| 2229 | |
| 2230 | static void __exit serial8250_pci_exit(void) |
| 2231 | { |
| 2232 | pci_unregister_driver(&serial_pci_driver); |
| 2233 | } |
| 2234 | |
| 2235 | module_init(serial8250_pci_init); |
| 2236 | module_exit(serial8250_pci_exit); |
| 2237 | |
| 2238 | MODULE_LICENSE("GPL"); |
| 2239 | MODULE_DESCRIPTION("Generic 8250/16x50 PCI serial probe module"); |
| 2240 | MODULE_DEVICE_TABLE(pci, serial_pci_tbl); |