blob: 794d82702c85902fdd4d71a999b09be3abd73704 [file] [log] [blame]
Paul Walmsley657ebfa2010-02-22 22:09:20 -07001/*
2 * OMAP3-specific clock framework functions
3 *
4 * Copyright (C) 2007-2008 Texas Instruments, Inc.
5 * Copyright (C) 2007-2010 Nokia Corporation
6 *
7 * Paul Walmsley
8 * Jouni Högander
9 *
10 * Parts of this code are based on code written by
11 * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
12 *
13 * This program is free software; you can redistribute it and/or modify
14 * it under the terms of the GNU General Public License version 2 as
15 * published by the Free Software Foundation.
16 */
17#undef DEBUG
18
19#include <linux/kernel.h>
20#include <linux/errno.h>
Paul Walmsley657ebfa2010-02-22 22:09:20 -070021#include <linux/clk.h>
22#include <linux/io.h>
Paul Walmsley657ebfa2010-02-22 22:09:20 -070023
Tony Lindgren2c799ce2012-02-24 10:34:35 -080024#include <plat/hardware.h>
Paul Walmsley657ebfa2010-02-22 22:09:20 -070025#include <plat/clock.h>
26
27#include "clock.h"
28#include "clock3xxx.h"
Paul Walmsley59fb6592010-12-21 15:30:55 -070029#include "prm2xxx_3xxx.h"
Paul Walmsley657ebfa2010-02-22 22:09:20 -070030#include "prm-regbits-34xx.h"
Paul Walmsley59fb6592010-12-21 15:30:55 -070031#include "cm2xxx_3xxx.h"
Paul Walmsley657ebfa2010-02-22 22:09:20 -070032#include "cm-regbits-34xx.h"
33
34/*
35 * DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks
36 * that are sourced by DPLL5, and both of these require this clock
37 * to be at 120 MHz for proper operation.
38 */
39#define DPLL5_FREQ_FOR_USBHOST 120000000
40
41/* needed by omap3_core_dpll_m2_set_rate() */
42struct clk *sdrc_ick_p, *arm_fck_p;
43
44int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate)
45{
46 /*
47 * According to the 12-5 CDP code from TI, "Limitation 2.5"
48 * on 3430ES1 prevents us from changing DPLL multipliers or dividers
49 * on DPLL4.
50 */
51 if (omap_rev() == OMAP3430_REV_ES1_0) {
52 pr_err("clock: DPLL4 cannot change rate due to "
53 "silicon 'Limitation 2.5' on 3430ES1.\n");
54 return -EINVAL;
55 }
56
57 return omap3_noncore_dpll_set_rate(clk, rate);
58}
59
60void __init omap3_clk_lock_dpll5(void)
61{
62 struct clk *dpll5_clk;
63 struct clk *dpll5_m2_clk;
64
65 dpll5_clk = clk_get(NULL, "dpll5_ck");
66 clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST);
67 clk_enable(dpll5_clk);
68
Paul Walmsley657ebfa2010-02-22 22:09:20 -070069 /* Program dpll5_m2_clk divider for no division */
70 dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck");
71 clk_enable(dpll5_m2_clk);
72 clk_set_rate(dpll5_m2_clk, DPLL5_FREQ_FOR_USBHOST);
73
74 clk_disable(dpll5_m2_clk);
75 clk_disable(dpll5_clk);
76 return;
77}
78
79/* Common clock code */
80
Paul Walmsley657ebfa2010-02-22 22:09:20 -070081/*
Paul Walmsley4d30e822010-02-22 22:09:36 -070082 * Switch the MPU rate if specified on cmdline. We cannot do this
83 * early until cmdline is parsed. XXX This should be removed from the
84 * clock code and handled by the OPP layer code in the near future.
Paul Walmsley657ebfa2010-02-22 22:09:20 -070085 */
86static int __init omap3xxx_clk_arch_init(void)
87{
Paul Walmsley4d30e822010-02-22 22:09:36 -070088 int ret;
Paul Walmsley657ebfa2010-02-22 22:09:20 -070089
90 if (!cpu_is_omap34xx())
91 return 0;
92
Paul Walmsley4d30e822010-02-22 22:09:36 -070093 ret = omap2_clk_switch_mpurate_at_boot("dpll1_ck");
94 if (!ret)
Paul Walmsleyf1f4b772010-12-21 21:08:14 -070095 omap2_clk_print_new_rates("osc_sys_ck", "core_ck", "arm_fck");
Paul Walmsley657ebfa2010-02-22 22:09:20 -070096
Paul Walmsley4d30e822010-02-22 22:09:36 -070097 return ret;
Paul Walmsley657ebfa2010-02-22 22:09:20 -070098}
Paul Walmsley4d30e822010-02-22 22:09:36 -070099
Paul Walmsley657ebfa2010-02-22 22:09:20 -0700100arch_initcall(omap3xxx_clk_arch_init);
101
102