blob: ba10c24f3d8dcef3378490a9f615c74b471e22a2 [file] [log] [blame]
Tony Lindgren1a48e152009-05-28 13:23:52 -07001/*
2 * linux/arch/arm/mach-omap2/gpmc-smc91x.c
3 *
4 * Copyright (C) 2009 Nokia Corporation
5 * Contact: Tony Lindgren
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 */
11
12#include <linux/kernel.h>
13#include <linux/platform_device.h>
14#include <linux/gpio.h>
15#include <linux/delay.h>
16#include <linux/interrupt.h>
17#include <linux/io.h>
18#include <linux/smc91x.h>
19
Tony Lindgrence491cf2009-10-20 09:40:47 -070020#include <plat/board.h>
21#include <plat/gpmc.h>
22#include <plat/gpmc-smc91x.h>
Tony Lindgren1a48e152009-05-28 13:23:52 -070023
24static struct omap_smc91x_platform_data *gpmc_cfg;
25
26static struct resource gpmc_smc91x_resources[] = {
27 [0] = {
28 .flags = IORESOURCE_MEM,
29 },
30 [1] = {
31 .flags = IORESOURCE_IRQ,
32 },
33};
34
35static struct smc91x_platdata gpmc_smc91x_info = {
Ladislav Michl3bc48012009-12-11 16:16:33 -080036 .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_0,
37 .leda = RPC_LED_100_10,
38 .ledb = RPC_LED_TX_RX,
Tony Lindgren1a48e152009-05-28 13:23:52 -070039};
40
41static struct platform_device gpmc_smc91x_device = {
42 .name = "smc91x",
43 .id = -1,
Tony Lindgren1a48e152009-05-28 13:23:52 -070044 .dev = {
45 .platform_data = &gpmc_smc91x_info,
46 },
Ladislav Michl3bc48012009-12-11 16:16:33 -080047 .num_resources = ARRAY_SIZE(gpmc_smc91x_resources),
48 .resource = gpmc_smc91x_resources,
Tony Lindgren1a48e152009-05-28 13:23:52 -070049};
50
51/*
52 * Set the gpmc timings for smc91c96. The timings are taken
53 * from the data sheet available at:
54 * http://www.smsc.com/main/catalog/lan91c96.html
55 * REVISIT: Level shifters can add at least to the access latency.
56 */
57static int smc91c96_gpmc_retime(void)
58{
59 struct gpmc_timings t;
60 const int t3 = 10; /* Figure 12.2 read and 12.4 write */
61 const int t4_r = 20; /* Figure 12.2 read */
62 const int t4_w = 5; /* Figure 12.4 write */
63 const int t5 = 25; /* Figure 12.2 read */
64 const int t6 = 15; /* Figure 12.2 read */
65 const int t7 = 5; /* Figure 12.4 write */
66 const int t8 = 5; /* Figure 12.4 write */
67 const int t20 = 185; /* Figure 12.2 read and 12.4 write */
68 u32 l;
69
70 memset(&t, 0, sizeof(t));
71
72 /* Read timings */
73 t.cs_on = 0;
74 t.adv_on = t.cs_on;
75 t.oe_on = t.adv_on + t3;
76 t.access = t.oe_on + t5;
77 t.oe_off = t.access;
78 t.adv_rd_off = t.oe_off + max(t4_r, t6);
79 t.cs_rd_off = t.oe_off;
80 t.rd_cycle = t20 - t.oe_on;
81
82 /* Write timings */
83 t.we_on = t.adv_on + t3;
84
85 if (cpu_is_omap34xx() && (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)) {
86 t.wr_data_mux_bus = t.we_on;
87 t.we_off = t.wr_data_mux_bus + t7;
88 } else
89 t.we_off = t.we_on + t7;
90 if (cpu_is_omap34xx())
91 t.wr_access = t.we_off;
92 t.adv_wr_off = t.we_off + max(t4_w, t8);
93 t.cs_wr_off = t.we_off + t4_w;
94 t.wr_cycle = t20 - t.we_on;
95
96 l = GPMC_CONFIG1_DEVICESIZE_16;
97 if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)
98 l |= GPMC_CONFIG1_MUXADDDATA;
99 if (gpmc_cfg->flags & GPMC_READ_MON)
100 l |= GPMC_CONFIG1_WAIT_READ_MON;
101 if (gpmc_cfg->flags & GPMC_WRITE_MON)
102 l |= GPMC_CONFIG1_WAIT_WRITE_MON;
103 if (gpmc_cfg->wait_pin)
104 l |= GPMC_CONFIG1_WAIT_PIN_SEL(gpmc_cfg->wait_pin);
105 gpmc_cs_write_reg(gpmc_cfg->cs, GPMC_CS_CONFIG1, l);
106
107 /*
108 * FIXME: Calculate the address and data bus muxed timings.
109 * Note that at least adv_rd_off needs to be changed according
110 * to omap3430 TRM Figure 11-11. Are the sdp boards using the
111 * FPGA in between smc91x and omap as the timings are different
112 * from above?
113 */
114 if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)
115 return 0;
116
117 return gpmc_cs_set_timings(gpmc_cfg->cs, &t);
118}
119
120/*
121 * Initialize smc91x device connected to the GPMC. Note that we
122 * assume that pin multiplexing is done in the board-*.c file,
123 * or in the bootloader.
124 */
125void __init gpmc_smc91x_init(struct omap_smc91x_platform_data *board_data)
126{
127 unsigned long cs_mem_base;
128 int ret;
129
130 gpmc_cfg = board_data;
131
132 if (gpmc_cfg->flags & GPMC_TIMINGS_SMC91C96)
133 gpmc_cfg->retime = smc91c96_gpmc_retime;
134
135 if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
136 printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
137 return;
138 }
139
140 gpmc_smc91x_resources[0].start = cs_mem_base + 0x300;
141 gpmc_smc91x_resources[0].end = cs_mem_base + 0x30f;
142 gpmc_smc91x_resources[1].flags |= (gpmc_cfg->flags & IRQF_TRIGGER_MASK);
143
144 if (gpmc_cfg->retime) {
145 ret = gpmc_cfg->retime();
146 if (ret != 0)
147 goto free1;
148 }
149
Igor Grinbergbc593f52011-05-03 18:22:09 +0300150 if (gpio_request_one(gpmc_cfg->gpio_irq, GPIOF_IN, "SMC91X irq") < 0)
Tony Lindgren1a48e152009-05-28 13:23:52 -0700151 goto free1;
152
Tony Lindgren1a48e152009-05-28 13:23:52 -0700153 gpmc_smc91x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq);
154
155 if (gpmc_cfg->gpio_pwrdwn) {
Igor Grinbergbc593f52011-05-03 18:22:09 +0300156 ret = gpio_request_one(gpmc_cfg->gpio_pwrdwn,
157 GPIOF_OUT_INIT_LOW, "SMC91X powerdown");
Tony Lindgren1a48e152009-05-28 13:23:52 -0700158 if (ret)
159 goto free2;
Tony Lindgren1a48e152009-05-28 13:23:52 -0700160 }
161
162 if (gpmc_cfg->gpio_reset) {
Igor Grinbergbc593f52011-05-03 18:22:09 +0300163 ret = gpio_request_one(gpmc_cfg->gpio_reset,
164 GPIOF_OUT_INIT_LOW, "SMC91X reset");
Tony Lindgren1a48e152009-05-28 13:23:52 -0700165 if (ret)
166 goto free3;
167
Tony Lindgren1a48e152009-05-28 13:23:52 -0700168 gpio_set_value(gpmc_cfg->gpio_reset, 1);
169 msleep(100);
170 gpio_set_value(gpmc_cfg->gpio_reset, 0);
171 }
172
173 if (platform_device_register(&gpmc_smc91x_device) < 0) {
174 printk(KERN_ERR "Unable to register smc91x device\n");
175 gpio_free(gpmc_cfg->gpio_reset);
176 goto free3;
177 }
178
179 return;
180
181free3:
182 if (gpmc_cfg->gpio_pwrdwn)
183 gpio_free(gpmc_cfg->gpio_pwrdwn);
184free2:
185 gpio_free(gpmc_cfg->gpio_irq);
186free1:
187 gpmc_cs_free(gpmc_cfg->cs);
188
189 printk(KERN_ERR "Could not initialize smc91x\n");
190}