blob: 5551d9d4016b9ffcded41d3a702d1d9937455cb8 [file] [log] [blame]
Juuso Oikarinen2b60100b2009-10-13 12:47:39 +03001/*
2 * This file is part of wl1271
3 *
4 * Copyright (C) 2009 Nokia Corporation
5 *
6 * Contact: Luciano Coelho <luciano.coelho@nokia.com>
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License
10 * version 2 as published by the Free Software Foundation.
11 *
12 * This program is distributed in the hope that it will be useful, but
13 * WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
15 * General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
20 * 02110-1301 USA
21 *
22 */
23
Shahar Levi00d20102010-11-08 11:20:10 +000024#ifndef __CONF_H__
25#define __CONF_H__
Juuso Oikarinen2b60100b2009-10-13 12:47:39 +030026
27enum {
28 CONF_HW_BIT_RATE_1MBPS = BIT(0),
29 CONF_HW_BIT_RATE_2MBPS = BIT(1),
30 CONF_HW_BIT_RATE_5_5MBPS = BIT(2),
31 CONF_HW_BIT_RATE_6MBPS = BIT(3),
32 CONF_HW_BIT_RATE_9MBPS = BIT(4),
33 CONF_HW_BIT_RATE_11MBPS = BIT(5),
34 CONF_HW_BIT_RATE_12MBPS = BIT(6),
35 CONF_HW_BIT_RATE_18MBPS = BIT(7),
36 CONF_HW_BIT_RATE_22MBPS = BIT(8),
37 CONF_HW_BIT_RATE_24MBPS = BIT(9),
38 CONF_HW_BIT_RATE_36MBPS = BIT(10),
39 CONF_HW_BIT_RATE_48MBPS = BIT(11),
40 CONF_HW_BIT_RATE_54MBPS = BIT(12),
41 CONF_HW_BIT_RATE_MCS_0 = BIT(13),
42 CONF_HW_BIT_RATE_MCS_1 = BIT(14),
43 CONF_HW_BIT_RATE_MCS_2 = BIT(15),
44 CONF_HW_BIT_RATE_MCS_3 = BIT(16),
45 CONF_HW_BIT_RATE_MCS_4 = BIT(17),
46 CONF_HW_BIT_RATE_MCS_5 = BIT(18),
47 CONF_HW_BIT_RATE_MCS_6 = BIT(19),
48 CONF_HW_BIT_RATE_MCS_7 = BIT(20)
49};
50
51enum {
52 CONF_HW_RATE_INDEX_1MBPS = 0,
53 CONF_HW_RATE_INDEX_2MBPS = 1,
54 CONF_HW_RATE_INDEX_5_5MBPS = 2,
55 CONF_HW_RATE_INDEX_6MBPS = 3,
56 CONF_HW_RATE_INDEX_9MBPS = 4,
57 CONF_HW_RATE_INDEX_11MBPS = 5,
58 CONF_HW_RATE_INDEX_12MBPS = 6,
59 CONF_HW_RATE_INDEX_18MBPS = 7,
60 CONF_HW_RATE_INDEX_22MBPS = 8,
61 CONF_HW_RATE_INDEX_24MBPS = 9,
62 CONF_HW_RATE_INDEX_36MBPS = 10,
63 CONF_HW_RATE_INDEX_48MBPS = 11,
64 CONF_HW_RATE_INDEX_54MBPS = 12,
65 CONF_HW_RATE_INDEX_MAX = CONF_HW_RATE_INDEX_54MBPS,
66};
67
Juuso Oikarinen1b00f542010-03-18 12:26:30 +020068enum {
Juuso Oikarinenf876bb92010-03-26 12:53:11 +020069 CONF_HW_RXTX_RATE_MCS7 = 0,
70 CONF_HW_RXTX_RATE_MCS6,
71 CONF_HW_RXTX_RATE_MCS5,
72 CONF_HW_RXTX_RATE_MCS4,
73 CONF_HW_RXTX_RATE_MCS3,
74 CONF_HW_RXTX_RATE_MCS2,
75 CONF_HW_RXTX_RATE_MCS1,
76 CONF_HW_RXTX_RATE_MCS0,
77 CONF_HW_RXTX_RATE_54,
78 CONF_HW_RXTX_RATE_48,
79 CONF_HW_RXTX_RATE_36,
80 CONF_HW_RXTX_RATE_24,
81 CONF_HW_RXTX_RATE_22,
82 CONF_HW_RXTX_RATE_18,
83 CONF_HW_RXTX_RATE_12,
84 CONF_HW_RXTX_RATE_11,
85 CONF_HW_RXTX_RATE_9,
86 CONF_HW_RXTX_RATE_6,
87 CONF_HW_RXTX_RATE_5_5,
88 CONF_HW_RXTX_RATE_2,
89 CONF_HW_RXTX_RATE_1,
90 CONF_HW_RXTX_RATE_MAX,
91 CONF_HW_RXTX_RATE_UNSUPPORTED = 0xff
92};
93
94enum {
Juuso Oikarinen1b00f542010-03-18 12:26:30 +020095 CONF_SG_DISABLE = 0,
96 CONF_SG_PROTECTIVE,
97 CONF_SG_OPPORTUNISTIC
98};
99
100enum {
101 /*
102 * PER threshold in PPM of the BT voice
103 *
104 * Range: 0 - 10000000
105 */
106 CONF_SG_BT_PER_THRESHOLD = 0,
107
108 /*
109 * Number of consequent RX_ACTIVE activities to override BT voice
110 * frames to ensure WLAN connection
111 *
112 * Range: 0 - 100
113 */
114 CONF_SG_HV3_MAX_OVERRIDE,
115
116 /*
117 * Defines the PER threshold of the BT voice
118 *
119 * Range: 0 - 65000
120 */
121 CONF_SG_BT_NFS_SAMPLE_INTERVAL,
122
123 /*
124 * Defines the load ratio of BT
125 *
126 * Range: 0 - 100 (%)
127 */
128 CONF_SG_BT_LOAD_RATIO,
129
130 /*
131 * Defines whether the SG will force WLAN host to enter/exit PSM
132 *
133 * Range: 1 - SG can force, 0 - host handles PSM
134 */
135 CONF_SG_AUTO_PS_MODE,
136
137 /*
138 * Compensation percentage of probe requests when scan initiated
139 * during BT voice/ACL link.
140 *
141 * Range: 0 - 255 (%)
142 */
143 CONF_SG_AUTO_SCAN_PROBE_REQ,
144
145 /*
146 * Compensation percentage of probe requests when active scan initiated
147 * during BT voice
148 *
149 * Range: 0 - 255 (%)
150 */
151 CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3,
152
153 /*
154 * Defines antenna configuration (single/dual antenna)
155 *
156 * Range: 0 - single antenna, 1 - dual antenna
157 */
158 CONF_SG_ANTENNA_CONFIGURATION,
159
160 /*
161 * The threshold (percent) of max consequtive beacon misses before
162 * increasing priority of beacon reception.
163 *
164 * Range: 0 - 100 (%)
165 */
166 CONF_SG_BEACON_MISS_PERCENT,
167
168 /*
169 * The rate threshold below which receiving a data frame from the AP
170 * will increase the priority of the data frame above BT traffic.
171 *
172 * Range: 0,2, 5(=5.5), 6, 9, 11, 12, 18, 24, 36, 48, 54
173 */
174 CONF_SG_RATE_ADAPT_THRESH,
175
176 /*
177 * Not used currently.
178 *
179 * Range: 0
180 */
181 CONF_SG_RATE_ADAPT_SNR,
182
183 /*
184 * Configure the min and max time BT gains the antenna
185 * in WLAN PSM / BT master basic rate
186 *
187 * Range: 0 - 255 (ms)
188 */
189 CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_BR,
190 CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_BR,
191
192 /*
193 * The time after it expires no new WLAN trigger frame is trasmitted
194 * in WLAN PSM / BT master basic rate
195 *
196 * Range: 0 - 255 (ms)
197 */
198 CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_BR,
199
200 /*
201 * Configure the min and max time BT gains the antenna
202 * in WLAN PSM / BT slave basic rate
203 *
204 * Range: 0 - 255 (ms)
205 */
206 CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_BR,
207 CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_BR,
208
209 /*
210 * The time after it expires no new WLAN trigger frame is trasmitted
211 * in WLAN PSM / BT slave basic rate
212 *
213 * Range: 0 - 255 (ms)
214 */
215 CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_BR,
216
217 /*
218 * Configure the min and max time BT gains the antenna
219 * in WLAN PSM / BT master EDR
220 *
221 * Range: 0 - 255 (ms)
222 */
223 CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_EDR,
224 CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_EDR,
225
226 /*
227 * The time after it expires no new WLAN trigger frame is trasmitted
228 * in WLAN PSM / BT master EDR
229 *
230 * Range: 0 - 255 (ms)
231 */
232 CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_EDR,
233
234 /*
235 * Configure the min and max time BT gains the antenna
236 * in WLAN PSM / BT slave EDR
237 *
238 * Range: 0 - 255 (ms)
239 */
240 CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_EDR,
241 CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_EDR,
242
243 /*
244 * The time after it expires no new WLAN trigger frame is trasmitted
245 * in WLAN PSM / BT slave EDR
246 *
247 * Range: 0 - 255 (ms)
248 */
249 CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_EDR,
250
251 /*
252 * RX guard time before the beginning of a new BT voice frame during
253 * which no new WLAN trigger frame is transmitted.
254 *
255 * Range: 0 - 100000 (us)
256 */
257 CONF_SG_RXT,
258
259 /*
260 * TX guard time before the beginning of a new BT voice frame during
261 * which no new WLAN frame is transmitted.
262 *
263 * Range: 0 - 100000 (us)
264 */
265
266 CONF_SG_TXT,
267
268 /*
269 * Enable adaptive RXT/TXT algorithm. If disabled, the host values
270 * will be utilized.
271 *
272 * Range: 0 - disable, 1 - enable
273 */
274 CONF_SG_ADAPTIVE_RXT_TXT,
275
276 /*
277 * The used WLAN legacy service period during active BT ACL link
278 *
279 * Range: 0 - 255 (ms)
280 */
281 CONF_SG_PS_POLL_TIMEOUT,
282
283 /*
284 * The used WLAN UPSD service period during active BT ACL link
285 *
286 * Range: 0 - 255 (ms)
287 */
288 CONF_SG_UPSD_TIMEOUT,
289
290 /*
291 * Configure the min and max time BT gains the antenna
292 * in WLAN Active / BT master EDR
293 *
294 * Range: 0 - 255 (ms)
295 */
296 CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MIN_EDR,
297 CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MAX_EDR,
298
299 /*
300 * The maximum time WLAN can gain the antenna for
301 * in WLAN Active / BT master EDR
302 *
303 * Range: 0 - 255 (ms)
304 */
305 CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_MASTER_EDR,
306
307 /*
308 * Configure the min and max time BT gains the antenna
309 * in WLAN Active / BT slave EDR
310 *
311 * Range: 0 - 255 (ms)
312 */
313 CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MIN_EDR,
314 CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MAX_EDR,
315
316 /*
317 * The maximum time WLAN can gain the antenna for
318 * in WLAN Active / BT slave EDR
319 *
320 * Range: 0 - 255 (ms)
321 */
322 CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_SLAVE_EDR,
323
324 /*
325 * Configure the min and max time BT gains the antenna
326 * in WLAN Active / BT basic rate
327 *
328 * Range: 0 - 255 (ms)
329 */
330 CONF_SG_WLAN_ACTIVE_BT_ACL_MIN_BR,
331 CONF_SG_WLAN_ACTIVE_BT_ACL_MAX_BR,
332
333 /*
334 * The maximum time WLAN can gain the antenna for
335 * in WLAN Active / BT basic rate
336 *
337 * Range: 0 - 255 (ms)
338 */
339 CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_BR,
340
341 /*
342 * Compensation percentage of WLAN passive scan window if initiated
343 * during BT voice
344 *
345 * Range: 0 - 1000 (%)
346 */
347 CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3,
348
349 /*
350 * Compensation percentage of WLAN passive scan window if initiated
351 * during BT A2DP
352 *
353 * Range: 0 - 1000 (%)
354 */
355 CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP,
356
357 /*
358 * Fixed time ensured for BT traffic to gain the antenna during WLAN
359 * passive scan.
360 *
361 * Range: 0 - 1000 ms
362 */
363 CONF_SG_PASSIVE_SCAN_A2DP_BT_TIME,
364
365 /*
366 * Fixed time ensured for WLAN traffic to gain the antenna during WLAN
367 * passive scan.
368 *
369 * Range: 0 - 1000 ms
370 */
371 CONF_SG_PASSIVE_SCAN_A2DP_WLAN_TIME,
372
373 /*
374 * Number of consequent BT voice frames not interrupted by WLAN
375 *
376 * Range: 0 - 100
377 */
378 CONF_SG_HV3_MAX_SERVED,
379
380 /*
381 * Protection time of the DHCP procedure.
382 *
383 * Range: 0 - 100000 (ms)
384 */
385 CONF_SG_DHCP_TIME,
386
387 /*
388 * Compensation percentage of WLAN active scan window if initiated
389 * during BT A2DP
390 *
391 * Range: 0 - 1000 (%)
392 */
393 CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP,
394 CONF_SG_TEMP_PARAM_1,
395 CONF_SG_TEMP_PARAM_2,
396 CONF_SG_TEMP_PARAM_3,
397 CONF_SG_TEMP_PARAM_4,
398 CONF_SG_TEMP_PARAM_5,
399 CONF_SG_PARAMS_MAX,
400 CONF_SG_PARAMS_ALL = 0xff
401};
402
Juuso Oikarinen2b60100b2009-10-13 12:47:39 +0300403struct conf_sg_settings {
Luciano Coelho23a7a512010-04-28 09:50:02 +0300404 u32 params[CONF_SG_PARAMS_MAX];
Juuso Oikarinen1b00f542010-03-18 12:26:30 +0200405 u8 state;
Juuso Oikarinen2b60100b2009-10-13 12:47:39 +0300406};
407
Juuso Oikarinen8793f9b2009-10-13 12:47:40 +0300408enum conf_rx_queue_type {
409 CONF_RX_QUEUE_TYPE_LOW_PRIORITY, /* All except the high priority */
410 CONF_RX_QUEUE_TYPE_HIGH_PRIORITY, /* Management and voice packets */
411};
412
413struct conf_rx_settings {
414 /*
415 * The maximum amount of time, in TU, before the
416 * firmware discards the MSDU.
417 *
418 * Range: 0 - 0xFFFFFFFF
419 */
420 u32 rx_msdu_life_time;
421
422 /*
423 * Packet detection threshold in the PHY.
424 *
425 * FIXME: details unknown.
426 */
427 u32 packet_detection_threshold;
428
429 /*
430 * The longest time the STA will wait to receive traffic from the AP
431 * after a PS-poll has been transmitted.
432 *
433 * Range: 0 - 200000
434 */
435 u16 ps_poll_timeout;
436 /*
437 * The longest time the STA will wait to receive traffic from the AP
438 * after a frame has been sent from an UPSD enabled queue.
439 *
440 * Range: 0 - 200000
441 */
442 u16 upsd_timeout;
443
444 /*
445 * The number of octets in an MPDU, below which an RTS/CTS
446 * handshake is not performed.
447 *
448 * Range: 0 - 4096
449 */
450 u16 rts_threshold;
451
452 /*
453 * The RX Clear Channel Assessment threshold in the PHY
454 * (the energy threshold).
455 *
456 * Range: ENABLE_ENERGY_D == 0x140A
457 * DISABLE_ENERGY_D == 0xFFEF
458 */
459 u16 rx_cca_threshold;
460
461 /*
462 * Occupied Rx mem-blocks number which requires interrupting the host
463 * (0 = no buffering, 0xffff = disabled).
464 *
465 * Range: u16
466 */
467 u16 irq_blk_threshold;
468
469 /*
470 * Rx packets number which requires interrupting the host
471 * (0 = no buffering).
472 *
473 * Range: u16
474 */
475 u16 irq_pkt_threshold;
476
477 /*
478 * Max time in msec the FW may delay RX-Complete interrupt.
479 *
480 * Range: 1 - 100
481 */
482 u16 irq_timeout;
483
484 /*
485 * The RX queue type.
486 *
487 * Range: RX_QUEUE_TYPE_RX_LOW_PRIORITY, RX_QUEUE_TYPE_RX_HIGH_PRIORITY,
488 */
489 u8 queue_type;
490};
491
Juuso Oikarinen45b531a2009-10-13 12:47:41 +0300492#define CONF_TX_MAX_RATE_CLASSES 8
493
494#define CONF_TX_RATE_MASK_UNSPECIFIED 0
Juuso Oikarinena6fe2312009-12-11 15:40:58 +0200495#define CONF_TX_RATE_MASK_BASIC (CONF_HW_BIT_RATE_1MBPS | \
496 CONF_HW_BIT_RATE_2MBPS)
Juuso Oikarinen45b531a2009-10-13 12:47:41 +0300497#define CONF_TX_RATE_RETRY_LIMIT 10
498
Arik Nemtsov1e05a812010-10-16 17:44:51 +0200499/*
500 * Rates supported for data packets when operating as AP. Note the absense
501 * of the 22Mbps rate. There is a FW limitation on 12 rates so we must drop
502 * one. The rate dropped is not mandatory under any operating mode.
503 */
504#define CONF_TX_AP_ENABLED_RATES (CONF_HW_BIT_RATE_1MBPS | \
505 CONF_HW_BIT_RATE_2MBPS | CONF_HW_BIT_RATE_5_5MBPS | \
506 CONF_HW_BIT_RATE_6MBPS | CONF_HW_BIT_RATE_9MBPS | \
507 CONF_HW_BIT_RATE_11MBPS | CONF_HW_BIT_RATE_12MBPS | \
508 CONF_HW_BIT_RATE_18MBPS | CONF_HW_BIT_RATE_24MBPS | \
509 CONF_HW_BIT_RATE_36MBPS | CONF_HW_BIT_RATE_48MBPS | \
510 CONF_HW_BIT_RATE_54MBPS)
511
512/*
513 * Default rates for management traffic when operating in AP mode. This
514 * should be configured according to the basic rate set of the AP
515 */
516#define CONF_TX_AP_DEFAULT_MGMT_RATES (CONF_HW_BIT_RATE_1MBPS | \
517 CONF_HW_BIT_RATE_2MBPS | CONF_HW_BIT_RATE_5_5MBPS)
518
Eliad Pellercb5ae052011-04-07 15:52:05 +0300519/*
520 * Default rates for working as IBSS. use 11b rates
521 */
522#define CONF_TX_IBSS_DEFAULT_RATES (CONF_HW_BIT_RATE_1MBPS | \
523 CONF_HW_BIT_RATE_2MBPS | CONF_HW_BIT_RATE_5_5MBPS | \
524 CONF_HW_BIT_RATE_11MBPS);
525
Juuso Oikarinen45b531a2009-10-13 12:47:41 +0300526struct conf_tx_rate_class {
527
528 /*
529 * The rates enabled for this rate class.
530 *
531 * Range: CONF_HW_BIT_RATE_* bit mask
532 */
533 u32 enabled_rates;
534
535 /*
536 * The dot11 short retry limit used for TX retries.
537 *
538 * Range: u8
539 */
540 u8 short_retry_limit;
541
542 /*
543 * The dot11 long retry limit used for TX retries.
544 *
545 * Range: u8
546 */
547 u8 long_retry_limit;
548
549 /*
550 * Flags controlling the attributes of TX transmission.
551 *
552 * Range: bit 0: Truncate - when set, FW attempts to send a frame stop
553 * when the total valid per-rate attempts have
554 * been exhausted; otherwise transmissions
555 * will continue at the lowest available rate
556 * until the appropriate one of the
557 * short_retry_limit, long_retry_limit,
558 * dot11_max_transmit_msdu_life_time, or
559 * max_tx_life_time, is exhausted.
560 * 1: Preamble Override - indicates if the preamble type
561 * should be used in TX.
562 * 2: Preamble Type - the type of the preamble to be used by
563 * the policy (0 - long preamble, 1 - short preamble.
564 */
565 u8 aflags;
566};
567
568#define CONF_TX_MAX_AC_COUNT 4
569
570/* Slot number setting to start transmission at PIFS interval */
571#define CONF_TX_AIFS_PIFS 1
572/* Slot number setting to start transmission at DIFS interval normal
573 * DCF access */
574#define CONF_TX_AIFS_DIFS 2
575
576
577enum conf_tx_ac {
578 CONF_TX_AC_BE = 0, /* best effort / legacy */
579 CONF_TX_AC_BK = 1, /* background */
580 CONF_TX_AC_VI = 2, /* video */
581 CONF_TX_AC_VO = 3, /* voice */
582 CONF_TX_AC_CTS2SELF = 4, /* fictious AC, follows AC_VO */
583 CONF_TX_AC_ANY_TID = 0x1f
584};
585
586struct conf_tx_ac_category {
587 /*
588 * The AC class identifier.
589 *
590 * Range: enum conf_tx_ac
591 */
592 u8 ac;
593
594 /*
595 * The contention window minimum size (in slots) for the access
596 * class.
597 *
598 * Range: u8
599 */
600 u8 cw_min;
601
602 /*
603 * The contention window maximum size (in slots) for the access
604 * class.
605 *
606 * Range: u8
607 */
608 u16 cw_max;
609
610 /*
611 * The AIF value (in slots) for the access class.
612 *
613 * Range: u8
614 */
615 u8 aifsn;
616
617 /*
618 * The TX Op Limit (in microseconds) for the access class.
619 *
620 * Range: u16
621 */
622 u16 tx_op_limit;
623};
624
Juuso Oikarinen9987a9d2010-09-01 11:31:12 +0200625#define CONF_TX_MAX_TID_COUNT 8
Juuso Oikarinen45b531a2009-10-13 12:47:41 +0300626
627enum {
628 CONF_CHANNEL_TYPE_DCF = 0, /* DC/LEGACY*/
629 CONF_CHANNEL_TYPE_EDCF = 1, /* EDCA*/
630 CONF_CHANNEL_TYPE_HCCA = 2, /* HCCA*/
631};
632
633enum {
634 CONF_PS_SCHEME_LEGACY = 0,
635 CONF_PS_SCHEME_UPSD_TRIGGER = 1,
636 CONF_PS_SCHEME_LEGACY_PSPOLL = 2,
637 CONF_PS_SCHEME_SAPSD = 3,
638};
639
640enum {
641 CONF_ACK_POLICY_LEGACY = 0,
642 CONF_ACK_POLICY_NO_ACK = 1,
643 CONF_ACK_POLICY_BLOCK = 2,
644};
645
646
647struct conf_tx_tid {
648 u8 queue_id;
649 u8 channel_type;
650 u8 tsid;
651 u8 ps_scheme;
652 u8 ack_policy;
653 u32 apsd_conf[2];
654};
655
656struct conf_tx_settings {
657 /*
658 * The TX ED value for TELEC Enable/Disable.
659 *
660 * Range: 0, 1
661 */
662 u8 tx_energy_detection;
663
664 /*
665 * Configuration for rate classes for TX (currently only one
Arik Nemtsov1e05a812010-10-16 17:44:51 +0200666 * rate class supported). Used in non-AP mode.
Juuso Oikarinen45b531a2009-10-13 12:47:41 +0300667 */
Arik Nemtsov1e05a812010-10-16 17:44:51 +0200668 struct conf_tx_rate_class sta_rc_conf;
Juuso Oikarinen45b531a2009-10-13 12:47:41 +0300669
670 /*
671 * Configuration for access categories for TX rate control.
672 */
673 u8 ac_conf_count;
674 struct conf_tx_ac_category ac_conf[CONF_TX_MAX_AC_COUNT];
675
676 /*
Arik Nemtsov1e05a812010-10-16 17:44:51 +0200677 * Configuration for rate classes in AP-mode. These rate classes
678 * are for the AC TX queues
679 */
680 struct conf_tx_rate_class ap_rc_conf[CONF_TX_MAX_AC_COUNT];
681
682 /*
683 * Management TX rate class for AP-mode.
684 */
685 struct conf_tx_rate_class ap_mgmt_conf;
686
687 /*
688 * Broadcast TX rate class for AP-mode.
689 */
690 struct conf_tx_rate_class ap_bcst_conf;
691
692 /*
Arik Nemtsov47684802011-04-26 23:21:51 +0300693 * Allow this number of TX retries to a connected station/AP before an
Arik Nemtsov79b223f2010-10-16 17:52:59 +0200694 * event is triggered from FW.
Arik Nemtsov47684802011-04-26 23:21:51 +0300695 * In AP-mode the hlids of unreachable stations are given in the
696 * "sta_tx_retry_exceeded" member in the event mailbox.
Arik Nemtsov79b223f2010-10-16 17:52:59 +0200697 */
Arik Nemtsov47684802011-04-26 23:21:51 +0300698 u8 max_tx_retries;
699
700 /*
701 * AP-mode - after this number of seconds a connected station is
702 * considered inactive.
703 */
704 u16 ap_aging_period;
Arik Nemtsov79b223f2010-10-16 17:52:59 +0200705
706 /*
Juuso Oikarinen45b531a2009-10-13 12:47:41 +0300707 * Configuration for TID parameters.
708 */
709 u8 tid_conf_count;
710 struct conf_tx_tid tid_conf[CONF_TX_MAX_TID_COUNT];
711
712 /*
713 * The TX fragmentation threshold.
714 *
715 * Range: u16
716 */
717 u16 frag_threshold;
718
719 /*
720 * Max time in msec the FW may delay frame TX-Complete interrupt.
721 *
722 * Range: u16
723 */
724 u16 tx_compl_timeout;
725
726 /*
727 * Completed TX packet count which requires to issue the TX-Complete
728 * interrupt.
729 *
730 * Range: u16
731 */
732 u16 tx_compl_threshold;
733
Juuso Oikarinenebba60c2010-04-01 11:38:20 +0300734 /*
735 * The rate used for control messages and scanning on the 2.4GHz band
736 *
737 * Range: CONF_HW_BIT_RATE_* bit mask
738 */
739 u32 basic_rate;
740
741 /*
742 * The rate used for control messages and scanning on the 5GHz band
743 *
744 * Range: CONF_HW_BIT_RATE_* bit mask
745 */
746 u32 basic_rate_5;
Arik Nemtsov1e05a812010-10-16 17:44:51 +0200747
748 /*
749 * TX retry limits for templates
750 */
751 u8 tmpl_short_retry_limit;
752 u8 tmpl_long_retry_limit;
Juuso Oikarinen45b531a2009-10-13 12:47:41 +0300753};
754
Juuso Oikarinen51f2be22009-10-13 12:47:42 +0300755enum {
756 CONF_WAKE_UP_EVENT_BEACON = 0x01, /* Wake on every Beacon*/
757 CONF_WAKE_UP_EVENT_DTIM = 0x02, /* Wake on every DTIM*/
758 CONF_WAKE_UP_EVENT_N_DTIM = 0x04, /* Wake every Nth DTIM */
759 CONF_WAKE_UP_EVENT_N_BEACONS = 0x08, /* Wake every Nth beacon */
760 CONF_WAKE_UP_EVENT_BITS_MASK = 0x0F
761};
762
763#define CONF_MAX_BCN_FILT_IE_COUNT 32
764
765#define CONF_BCN_RULE_PASS_ON_CHANGE BIT(0)
766#define CONF_BCN_RULE_PASS_ON_APPEARANCE BIT(1)
767
768#define CONF_BCN_IE_OUI_LEN 3
769#define CONF_BCN_IE_VER_LEN 2
770
771struct conf_bcn_filt_rule {
772 /*
773 * IE number to which to associate a rule.
774 *
775 * Range: u8
776 */
777 u8 ie;
778
779 /*
780 * Rule to associate with the specific ie.
781 *
782 * Range: CONF_BCN_RULE_PASS_ON_*
783 */
784 u8 rule;
785
786 /*
787 * OUI for the vendor specifie IE (221)
788 */
789 u8 oui[CONF_BCN_IE_OUI_LEN];
790
791 /*
792 * Type for the vendor specifie IE (221)
793 */
794 u8 type;
795
796 /*
797 * Version for the vendor specifie IE (221)
798 */
799 u8 version[CONF_BCN_IE_VER_LEN];
800};
801
802#define CONF_MAX_RSSI_SNR_TRIGGERS 8
803
804enum {
805 CONF_TRIG_METRIC_RSSI_BEACON = 0,
806 CONF_TRIG_METRIC_RSSI_DATA,
807 CONF_TRIG_METRIC_SNR_BEACON,
808 CONF_TRIG_METRIC_SNR_DATA
809};
810
811enum {
812 CONF_TRIG_EVENT_TYPE_LEVEL = 0,
813 CONF_TRIG_EVENT_TYPE_EDGE
814};
815
816enum {
817 CONF_TRIG_EVENT_DIR_LOW = 0,
818 CONF_TRIG_EVENT_DIR_HIGH,
819 CONF_TRIG_EVENT_DIR_BIDIR
820};
821
Juuso Oikarinen51f2be22009-10-13 12:47:42 +0300822struct conf_sig_weights {
823
824 /*
825 * RSSI from beacons average weight.
826 *
827 * Range: u8
828 */
829 u8 rssi_bcn_avg_weight;
830
831 /*
832 * RSSI from data average weight.
833 *
834 * Range: u8
835 */
836 u8 rssi_pkt_avg_weight;
837
838 /*
839 * SNR from beacons average weight.
840 *
841 * Range: u8
842 */
843 u8 snr_bcn_avg_weight;
844
845 /*
846 * SNR from data average weight.
847 *
848 * Range: u8
849 */
850 u8 snr_pkt_avg_weight;
851};
852
853enum conf_bcn_filt_mode {
854 CONF_BCN_FILT_MODE_DISABLED = 0,
855 CONF_BCN_FILT_MODE_ENABLED = 1
856};
857
Juuso Oikarinen11f70f92009-10-13 12:47:46 +0300858enum conf_bet_mode {
859 CONF_BET_MODE_DISABLE = 0,
860 CONF_BET_MODE_ENABLE = 1,
861};
862
Juuso Oikarinen51f2be22009-10-13 12:47:42 +0300863struct conf_conn_settings {
864 /*
865 * Firmware wakeup conditions configuration. The host may set only
866 * one bit.
867 *
868 * Range: CONF_WAKE_UP_EVENT_*
869 */
870 u8 wake_up_event;
871
872 /*
873 * Listen interval for beacons or Dtims.
874 *
875 * Range: 0 for beacon and Dtim wakeup
876 * 1-10 for x Dtims
877 * 1-255 for x beacons
878 */
879 u8 listen_interval;
880
881 /*
882 * Enable or disable the beacon filtering.
883 *
884 * Range: CONF_BCN_FILT_MODE_*
885 */
886 enum conf_bcn_filt_mode bcn_filt_mode;
887
888 /*
889 * Configure Beacon filter pass-thru rules.
890 */
891 u8 bcn_filt_ie_count;
892 struct conf_bcn_filt_rule bcn_filt_ie[CONF_MAX_BCN_FILT_IE_COUNT];
893
894 /*
895 * The number of consequtive beacons to lose, before the firmware
896 * becomes out of synch.
897 *
898 * Range: u32
899 */
900 u32 synch_fail_thold;
901
902 /*
903 * After out-of-synch, the number of TU's to wait without a further
904 * received beacon (or probe response) before issuing the BSS_EVENT_LOSE
905 * event.
906 *
907 * Range: u32
908 */
909 u32 bss_lose_timeout;
910
911 /*
912 * Beacon receive timeout.
913 *
914 * Range: u32
915 */
916 u32 beacon_rx_timeout;
917
918 /*
919 * Broadcast receive timeout.
920 *
921 * Range: u32
922 */
923 u32 broadcast_timeout;
924
925 /*
926 * Enable/disable reception of broadcast packets in power save mode
927 *
928 * Range: 1 - enable, 0 - disable
929 */
930 u8 rx_broadcast_in_ps;
931
932 /*
933 * Consequtive PS Poll failures before sending event to driver
934 *
935 * Range: u8
936 */
937 u8 ps_poll_threshold;
938
939 /*
Juuso Oikarinen90494a92010-07-08 17:50:00 +0300940 * PS Poll failure recovery ACTIVE period length
941 *
942 * Range: u32 (ms)
943 */
944 u32 ps_poll_recovery_period;
945
946 /*
Juuso Oikarinen51f2be22009-10-13 12:47:42 +0300947 * Configuration of signal average weights.
948 */
949 struct conf_sig_weights sig_weights;
Juuso Oikarinen11f70f92009-10-13 12:47:46 +0300950
951 /*
952 * Specifies if beacon early termination procedure is enabled or
953 * disabled.
954 *
955 * Range: CONF_BET_MODE_*
956 */
957 u8 bet_enable;
958
959 /*
960 * Specifies the maximum number of consecutive beacons that may be
961 * early terminated. After this number is reached at least one full
962 * beacon must be correctly received in FW before beacon ET
963 * resumes.
964 *
965 * Range 0 - 255
966 */
967 u8 bet_max_consecutive;
Juuso Oikarinen19ad0712009-11-02 20:22:11 +0200968
969 /*
970 * Specifies the maximum number of times to try PSM entry if it fails
971 * (if sending the appropriate null-func message fails.)
972 *
973 * Range 0 - 255
974 */
975 u8 psm_entry_retries;
Juuso Oikarinenc1899552010-03-26 12:53:32 +0200976
977 /*
Eliad Pelleree608332011-02-02 09:59:34 +0200978 * Specifies the maximum number of times to try PSM exit if it fails
979 * (if sending the appropriate null-func message fails.)
980 *
981 * Range 0 - 255
982 */
983 u8 psm_exit_retries;
984
985 /*
Juuso Oikarinen8eab7b42010-09-24 03:10:11 +0200986 * Specifies the maximum number of times to try transmit the PSM entry
987 * null-func frame for each PSM entry attempt
988 *
989 * Range 0 - 255
990 */
991 u8 psm_entry_nullfunc_retries;
992
993 /*
994 * Specifies the time to linger in active mode after successfully
995 * transmitting the PSM entry null-func frame.
996 *
997 * Range 0 - 255 TU's
998 */
999 u8 psm_entry_hangover_period;
1000
1001 /*
Juuso Oikarinenc1899552010-03-26 12:53:32 +02001002 *
1003 * Specifies the interval of the connection keep-alive null-func
1004 * frame in ms.
1005 *
1006 * Range: 1000 - 3600000
1007 */
1008 u32 keep_alive_interval;
Juuso Oikarinen50c500a2010-04-01 11:38:22 +03001009
1010 /*
1011 * Maximum listen interval supported by the driver in units of beacons.
1012 *
1013 * Range: u16
1014 */
1015 u8 max_listen_interval;
Juuso Oikarinen51f2be22009-10-13 12:47:42 +03001016};
1017
Juuso Oikarinen47fab7d2009-10-13 12:47:43 +03001018enum {
1019 CONF_REF_CLK_19_2_E,
1020 CONF_REF_CLK_26_E,
1021 CONF_REF_CLK_38_4_E,
Shahar Levi5aa42342011-03-06 16:32:07 +02001022 CONF_REF_CLK_52_E,
1023 CONF_REF_CLK_38_4_M_XTAL,
1024 CONF_REF_CLK_26_M_XTAL,
Juuso Oikarinen47fab7d2009-10-13 12:47:43 +03001025};
1026
Teemu Paasikivi1ebec3d2009-10-13 12:47:48 +03001027enum single_dual_band_enum {
1028 CONF_SINGLE_BAND,
1029 CONF_DUAL_BAND
1030};
1031
Juuso Oikarinen47fab7d2009-10-13 12:47:43 +03001032#define CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE 15
1033#define CONF_NUMBER_OF_SUB_BANDS_5 7
1034#define CONF_NUMBER_OF_RATE_GROUPS 6
1035#define CONF_NUMBER_OF_CHANNELS_2_4 14
1036#define CONF_NUMBER_OF_CHANNELS_5 35
1037
Luciano Coelho6e92b412009-12-11 15:40:50 +02001038struct conf_itrim_settings {
1039 /* enable dco itrim */
1040 u8 enable;
1041
1042 /* moderation timeout in microsecs from the last TX */
1043 u32 timeout;
1044};
1045
Juuso Oikarinen38ad2d82009-12-11 15:41:08 +02001046struct conf_pm_config_settings {
1047 /*
1048 * Host clock settling time
1049 *
1050 * Range: 0 - 30000 us
1051 */
1052 u32 host_clk_settling_time;
1053
1054 /*
1055 * Host fast wakeup support
1056 *
1057 * Range: true, false
1058 */
1059 bool host_fast_wakeup_support;
1060};
1061
Juuso Oikarinen00236aed2010-04-09 11:07:30 +03001062struct conf_roam_trigger_settings {
1063 /*
1064 * The minimum interval between two trigger events.
1065 *
1066 * Range: 0 - 60000 ms
1067 */
1068 u16 trigger_pacing;
1069
1070 /*
1071 * The weight for rssi/beacon average calculation
1072 *
1073 * Range: 0 - 255
1074 */
1075 u8 avg_weight_rssi_beacon;
1076
1077 /*
1078 * The weight for rssi/data frame average calculation
1079 *
1080 * Range: 0 - 255
1081 */
1082 u8 avg_weight_rssi_data;
1083
1084 /*
1085 * The weight for snr/beacon average calculation
1086 *
1087 * Range: 0 - 255
1088 */
1089 u8 avg_weight_snr_beacon;
1090
1091 /*
1092 * The weight for snr/data frame average calculation
1093 *
1094 * Range: 0 - 255
1095 */
1096 u8 avg_weight_snr_data;
1097};
1098
Juuso Oikarinenbea39d62010-09-21 08:14:31 +02001099struct conf_scan_settings {
1100 /*
1101 * The minimum time to wait on each channel for active scans
1102 *
Juuso Oikarinenea45b2c2011-01-24 07:01:54 +01001103 * Range: u32 tu/1000
Juuso Oikarinenbea39d62010-09-21 08:14:31 +02001104 */
Juuso Oikarinenea45b2c2011-01-24 07:01:54 +01001105 u32 min_dwell_time_active;
Juuso Oikarinenbea39d62010-09-21 08:14:31 +02001106
1107 /*
1108 * The maximum time to wait on each channel for active scans
1109 *
Juuso Oikarinenea45b2c2011-01-24 07:01:54 +01001110 * Range: u32 tu/1000
Juuso Oikarinenbea39d62010-09-21 08:14:31 +02001111 */
Juuso Oikarinenea45b2c2011-01-24 07:01:54 +01001112 u32 max_dwell_time_active;
1113
1114 /*
1115 * The minimum time to wait on each channel for passive scans
1116 *
1117 * Range: u32 tu/1000
1118 */
1119 u32 min_dwell_time_passive;
Juuso Oikarinenbea39d62010-09-21 08:14:31 +02001120
1121 /*
1122 * The maximum time to wait on each channel for passive scans
1123 *
Juuso Oikarinenea45b2c2011-01-24 07:01:54 +01001124 * Range: u32 tu/1000
Juuso Oikarinenbea39d62010-09-21 08:14:31 +02001125 */
Juuso Oikarinenea45b2c2011-01-24 07:01:54 +01001126 u32 max_dwell_time_passive;
Juuso Oikarinenbea39d62010-09-21 08:14:31 +02001127
1128 /*
1129 * Number of probe requests to transmit on each active scan channel
1130 *
1131 * Range: u8
1132 */
1133 u16 num_probe_reqs;
1134
1135};
1136
Juuso Oikarinen644a4862010-10-05 13:11:56 +02001137/* these are number of channels on the band divided by two, rounded up */
1138#define CONF_TX_PWR_COMPENSATION_LEN_2 7
1139#define CONF_TX_PWR_COMPENSATION_LEN_5 18
1140
1141struct conf_rf_settings {
1142 /*
1143 * Per channel power compensation for 2.4GHz
1144 *
1145 * Range: s8
1146 */
1147 u8 tx_per_channel_power_compensation_2[CONF_TX_PWR_COMPENSATION_LEN_2];
1148
1149 /*
1150 * Per channel power compensation for 5GHz
1151 *
1152 * Range: s8
1153 */
1154 u8 tx_per_channel_power_compensation_5[CONF_TX_PWR_COMPENSATION_LEN_5];
1155};
1156
Levi, Shahar4b7fac72011-01-23 07:27:22 +01001157struct conf_ht_setting {
1158 u16 tx_ba_win_size;
1159 u16 inactivity_timeout;
1160};
1161
Eliad Pellerc8bde242011-02-02 09:59:35 +02001162struct conf_memory_settings {
Eliad Pellerfe5ef092011-02-02 09:59:36 +02001163 /* Number of stations supported in IBSS mode */
1164 u8 num_stations;
1165
1166 /* Number of ssid profiles used in IBSS mode */
1167 u8 ssid_profiles;
1168
1169 /* Number of memory buffers allocated to rx pool */
1170 u8 rx_block_num;
1171
1172 /* Minimum number of blocks allocated to tx pool */
1173 u8 tx_min_block_num;
1174
Eliad Pellerc8bde242011-02-02 09:59:35 +02001175 /* Disable/Enable dynamic memory */
1176 u8 dynamic_memory;
1177
1178 /*
1179 * Minimum required free tx memory blocks in order to assure optimum
1180 * performence
1181 *
1182 * Range: 0-120
1183 */
1184 u8 min_req_tx_blocks;
1185
1186 /*
1187 * Minimum required free rx memory blocks in order to assure optimum
1188 * performence
1189 *
1190 * Range: 0-120
1191 */
1192 u8 min_req_rx_blocks;
1193
1194 /*
1195 * Minimum number of mem blocks (free+used) guaranteed for TX
1196 *
1197 * Range: 0-120
1198 */
1199 u8 tx_min;
1200};
1201
Juuso Oikarinen2b60100b2009-10-13 12:47:39 +03001202struct conf_drv_settings {
1203 struct conf_sg_settings sg;
Juuso Oikarinen8793f9b2009-10-13 12:47:40 +03001204 struct conf_rx_settings rx;
Juuso Oikarinen45b531a2009-10-13 12:47:41 +03001205 struct conf_tx_settings tx;
Juuso Oikarinen51f2be22009-10-13 12:47:42 +03001206 struct conf_conn_settings conn;
Luciano Coelho6e92b412009-12-11 15:40:50 +02001207 struct conf_itrim_settings itrim;
Juuso Oikarinen38ad2d82009-12-11 15:41:08 +02001208 struct conf_pm_config_settings pm_config;
Juuso Oikarinen00236aed2010-04-09 11:07:30 +03001209 struct conf_roam_trigger_settings roam_trigger;
Juuso Oikarinenbea39d62010-09-21 08:14:31 +02001210 struct conf_scan_settings scan;
Juuso Oikarinen644a4862010-10-05 13:11:56 +02001211 struct conf_rf_settings rf;
Levi, Shahar4b7fac72011-01-23 07:27:22 +01001212 struct conf_ht_setting ht;
Shahar Levi13b107d2011-03-06 16:32:12 +02001213 struct conf_memory_settings mem_wl127x;
1214 struct conf_memory_settings mem_wl128x;
Luciano Coelhoafb7d3c2011-04-01 20:48:02 +03001215 u8 hci_io_ds;
Juuso Oikarinen2b60100b2009-10-13 12:47:39 +03001216};
1217
1218#endif