blob: a5333c1907898ef71a301eecd75d8e3e56cbb5fd [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/* drivers/video/s1d13xxxfb.c
2 *
3 * (c) 2004 Simtec Electronics
4 * (c) 2005 Thibaut VARENE <varenet@parisc-linux.org>
5 *
6 * Driver for Epson S1D13xxx series framebuffer chips
7 *
8 * Adapted from
9 * linux/drivers/video/skeletonfb.c
10 * linux/drivers/video/epson1355fb.c
11 * linux/drivers/video/epson/s1d13xxxfb.c (2.4 driver by Epson)
12 *
13 * Note, currently only tested on S1D13806 with 16bit CRT.
14 * As such, this driver might still contain some hardcoded bits relating to
15 * S1D13806.
16 * Making it work on other S1D13XXX chips should merely be a matter of adding
17 * a few switch()s, some missing glue here and there maybe, and split header
18 * files.
19 *
20 * TODO: - handle dual screen display (CRT and LCD at the same time).
21 * - check_var(), mode change, etc.
22 * - PM untested.
23 * - Accelerated interfaces.
24 * - Probably not SMP safe :)
25 *
26 * This file is subject to the terms and conditions of the GNU General Public
27 * License. See the file COPYING in the main directory of this archive for
28 * more details.
29 */
30
Linus Torvalds1da177e2005-04-16 15:20:36 -070031#include <linux/module.h>
Russell Kingd052d1b2005-10-29 19:07:23 +010032#include <linux/platform_device.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070033#include <linux/delay.h>
34
35#include <linux/types.h>
36#include <linux/errno.h>
37#include <linux/mm.h>
38#include <linux/mman.h>
39#include <linux/fb.h>
40
41#include <asm/io.h>
42
43#include <video/s1d13xxxfb.h>
44
45#define PFX "s1d13xxxfb: "
46
47#if 0
48#define dbg(fmt, args...) do { printk(KERN_INFO fmt, ## args); } while(0)
49#else
50#define dbg(fmt, args...) do { } while (0)
51#endif
52
53/*
54 * Here we define the default struct fb_fix_screeninfo
55 */
56static struct fb_fix_screeninfo __devinitdata s1d13xxxfb_fix = {
57 .id = S1D_FBID,
58 .type = FB_TYPE_PACKED_PIXELS,
59 .visual = FB_VISUAL_PSEUDOCOLOR,
60 .xpanstep = 0,
61 .ypanstep = 1,
62 .ywrapstep = 0,
63 .accel = FB_ACCEL_NONE,
64};
65
66static inline u8
67s1d13xxxfb_readreg(struct s1d13xxxfb_par *par, u16 regno)
68{
Hirokazu Takata316240f2005-07-07 17:59:32 -070069#if defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_OPSPUT) || defined(CONFIG_PLAT_MAPPI3)
70 regno=((regno & 1) ? (regno & ~1L) : (regno + 1));
71#endif
Linus Torvalds1da177e2005-04-16 15:20:36 -070072 return readb(par->regs + regno);
73}
74
75static inline void
76s1d13xxxfb_writereg(struct s1d13xxxfb_par *par, u16 regno, u8 value)
77{
Hirokazu Takata316240f2005-07-07 17:59:32 -070078#if defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_OPSPUT) || defined(CONFIG_PLAT_MAPPI3)
79 regno=((regno & 1) ? (regno & ~1L) : (regno + 1));
80#endif
Linus Torvalds1da177e2005-04-16 15:20:36 -070081 writeb(value, par->regs + regno);
82}
83
84static inline void
85s1d13xxxfb_runinit(struct s1d13xxxfb_par *par,
86 const struct s1d13xxxfb_regval *initregs,
87 const unsigned int size)
88{
89 int i;
90
91 for (i = 0; i < size; i++) {
92 if ((initregs[i].addr == S1DREG_DELAYOFF) ||
93 (initregs[i].addr == S1DREG_DELAYON))
94 mdelay((int)initregs[i].value);
95 else {
96 s1d13xxxfb_writereg(par, initregs[i].addr, initregs[i].value);
97 }
98 }
99
100 /* make sure the hardware can cope with us */
101 mdelay(1);
102}
103
104static inline void
105lcd_enable(struct s1d13xxxfb_par *par, int enable)
106{
107 u8 mode = s1d13xxxfb_readreg(par, S1DREG_COM_DISP_MODE);
108
109 if (enable)
110 mode |= 0x01;
111 else
112 mode &= ~0x01;
113
114 s1d13xxxfb_writereg(par, S1DREG_COM_DISP_MODE, mode);
115}
116
117static inline void
118crt_enable(struct s1d13xxxfb_par *par, int enable)
119{
120 u8 mode = s1d13xxxfb_readreg(par, S1DREG_COM_DISP_MODE);
121
122 if (enable)
123 mode |= 0x02;
124 else
125 mode &= ~0x02;
126
127 s1d13xxxfb_writereg(par, S1DREG_COM_DISP_MODE, mode);
128}
129
130/* framebuffer control routines */
131
132static inline void
133s1d13xxxfb_setup_pseudocolour(struct fb_info *info)
134{
135 info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
136
137 info->var.red.length = 4;
138 info->var.green.length = 4;
139 info->var.blue.length = 4;
140}
141
142static inline void
143s1d13xxxfb_setup_truecolour(struct fb_info *info)
144{
145 info->fix.visual = FB_VISUAL_TRUECOLOR;
146 info->var.bits_per_pixel = 16;
147
148 info->var.red.length = 5;
149 info->var.red.offset = 11;
150
151 info->var.green.length = 6;
152 info->var.green.offset = 5;
153
154 info->var.blue.length = 5;
155 info->var.blue.offset = 0;
156}
157
158/**
159 * s1d13xxxfb_set_par - Alters the hardware state.
160 * @info: frame buffer structure
161 *
162 * Using the fb_var_screeninfo in fb_info we set the depth of the
163 * framebuffer. This function alters the par AND the
164 * fb_fix_screeninfo stored in fb_info. It doesn't not alter var in
165 * fb_info since we are using that data. This means we depend on the
166 * data in var inside fb_info to be supported by the hardware.
167 * xxxfb_check_var is always called before xxxfb_set_par to ensure this.
168 *
169 * XXX TODO: write proper s1d13xxxfb_check_var(), without which that
170 * function is quite useless.
171 */
172static int
173s1d13xxxfb_set_par(struct fb_info *info)
174{
175 struct s1d13xxxfb_par *s1dfb = info->par;
176 unsigned int val;
177
178 dbg("s1d13xxxfb_set_par: bpp=%d\n", info->var.bits_per_pixel);
179
180 if ((s1dfb->display & 0x01)) /* LCD */
181 val = s1d13xxxfb_readreg(s1dfb, S1DREG_LCD_DISP_MODE); /* read colour control */
182 else /* CRT */
183 val = s1d13xxxfb_readreg(s1dfb, S1DREG_CRT_DISP_MODE); /* read colour control */
184
185 val &= ~0x07;
186
187 switch (info->var.bits_per_pixel) {
188 case 4:
189 dbg("pseudo colour 4\n");
190 s1d13xxxfb_setup_pseudocolour(info);
191 val |= 2;
192 break;
193 case 8:
194 dbg("pseudo colour 8\n");
195 s1d13xxxfb_setup_pseudocolour(info);
196 val |= 3;
197 break;
198 case 16:
199 dbg("true colour\n");
200 s1d13xxxfb_setup_truecolour(info);
201 val |= 5;
202 break;
203
204 default:
205 dbg("bpp not supported!\n");
206 return -EINVAL;
207 }
208
209 dbg("writing %02x to display mode register\n", val);
210
211 if ((s1dfb->display & 0x01)) /* LCD */
212 s1d13xxxfb_writereg(s1dfb, S1DREG_LCD_DISP_MODE, val);
213 else /* CRT */
214 s1d13xxxfb_writereg(s1dfb, S1DREG_CRT_DISP_MODE, val);
215
216 info->fix.line_length = info->var.xres * info->var.bits_per_pixel;
217 info->fix.line_length /= 8;
218
219 dbg("setting line_length to %d\n", info->fix.line_length);
220
221 dbg("done setup\n");
222
223 return 0;
224}
225
226/**
227 * s1d13xxxfb_setcolreg - sets a color register.
228 * @regno: Which register in the CLUT we are programming
229 * @red: The red value which can be up to 16 bits wide
230 * @green: The green value which can be up to 16 bits wide
231 * @blue: The blue value which can be up to 16 bits wide.
232 * @transp: If supported the alpha value which can be up to 16 bits wide.
233 * @info: frame buffer info structure
234 *
235 * Returns negative errno on error, or zero on success.
236 */
237static int
238s1d13xxxfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
239 u_int transp, struct fb_info *info)
240{
241 struct s1d13xxxfb_par *s1dfb = info->par;
242 unsigned int pseudo_val;
243
244 if (regno >= S1D_PALETTE_SIZE)
245 return -EINVAL;
246
247 dbg("s1d13xxxfb_setcolreg: %d: rgb=%d,%d,%d, tr=%d\n",
248 regno, red, green, blue, transp);
249
250 if (info->var.grayscale)
251 red = green = blue = (19595*red + 38470*green + 7471*blue) >> 16;
252
253 switch (info->fix.visual) {
254 case FB_VISUAL_TRUECOLOR:
255 if (regno >= 16)
256 return -EINVAL;
257
258 /* deal with creating pseudo-palette entries */
259
260 pseudo_val = (red >> 11) << info->var.red.offset;
261 pseudo_val |= (green >> 10) << info->var.green.offset;
262 pseudo_val |= (blue >> 11) << info->var.blue.offset;
263
264 dbg("s1d13xxxfb_setcolreg: pseudo %d, val %08x\n",
265 regno, pseudo_val);
266
Hirokazu Takata316240f2005-07-07 17:59:32 -0700267#if defined(CONFIG_PLAT_MAPPI)
268 ((u32 *)info->pseudo_palette)[regno] = cpu_to_le16(pseudo_val);
269#else
Linus Torvalds1da177e2005-04-16 15:20:36 -0700270 ((u32 *)info->pseudo_palette)[regno] = pseudo_val;
Hirokazu Takata316240f2005-07-07 17:59:32 -0700271#endif
Linus Torvalds1da177e2005-04-16 15:20:36 -0700272
273 break;
274 case FB_VISUAL_PSEUDOCOLOR:
275 s1d13xxxfb_writereg(s1dfb, S1DREG_LKUP_ADDR, regno);
276 s1d13xxxfb_writereg(s1dfb, S1DREG_LKUP_DATA, red);
277 s1d13xxxfb_writereg(s1dfb, S1DREG_LKUP_DATA, green);
278 s1d13xxxfb_writereg(s1dfb, S1DREG_LKUP_DATA, blue);
279
280 break;
281 default:
282 return -ENOSYS;
283 }
284
285 dbg("s1d13xxxfb_setcolreg: done\n");
286
287 return 0;
288}
289
290/**
291 * s1d13xxxfb_blank - blanks the display.
292 * @blank_mode: the blank mode we want.
293 * @info: frame buffer structure that represents a single frame buffer
294 *
295 * Blank the screen if blank_mode != 0, else unblank. Return 0 if
296 * blanking succeeded, != 0 if un-/blanking failed due to e.g. a
297 * video mode which doesn't support it. Implements VESA suspend
298 * and powerdown modes on hardware that supports disabling hsync/vsync:
299 * blank_mode == 2: suspend vsync
300 * blank_mode == 3: suspend hsync
301 * blank_mode == 4: powerdown
302 *
303 * Returns negative errno on error, or zero on success.
304 */
305static int
306s1d13xxxfb_blank(int blank_mode, struct fb_info *info)
307{
308 struct s1d13xxxfb_par *par = info->par;
309
310 dbg("s1d13xxxfb_blank: blank=%d, info=%p\n", blank_mode, info);
311
312 switch (blank_mode) {
313 case FB_BLANK_UNBLANK:
314 case FB_BLANK_NORMAL:
315 if ((par->display & 0x01) != 0)
316 lcd_enable(par, 1);
317 if ((par->display & 0x02) != 0)
318 crt_enable(par, 1);
319 break;
320 case FB_BLANK_VSYNC_SUSPEND:
321 case FB_BLANK_HSYNC_SUSPEND:
322 break;
323 case FB_BLANK_POWERDOWN:
324 lcd_enable(par, 0);
325 crt_enable(par, 0);
326 break;
327 default:
328 return -EINVAL;
329 }
330
331 /* let fbcon do a soft blank for us */
332 return ((blank_mode == FB_BLANK_NORMAL) ? 1 : 0);
333}
334
335/**
336 * s1d13xxxfb_pan_display - Pans the display.
337 * @var: frame buffer variable screen structure
338 * @info: frame buffer structure that represents a single frame buffer
339 *
340 * Pan (or wrap, depending on the `vmode' field) the display using the
341 * `yoffset' field of the `var' structure (`xoffset' not yet supported).
342 * If the values don't fit, return -EINVAL.
343 *
344 * Returns negative errno on error, or zero on success.
345 */
346static int
347s1d13xxxfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
348{
349 struct s1d13xxxfb_par *par = info->par;
350 u32 start;
351
352 if (var->xoffset != 0) /* not yet ... */
353 return -EINVAL;
354
355 if (var->yoffset + info->var.yres > info->var.yres_virtual)
356 return -EINVAL;
357
358 start = (info->fix.line_length >> 1) * var->yoffset;
359
360 if ((par->display & 0x01)) {
361 /* LCD */
362 s1d13xxxfb_writereg(par, S1DREG_LCD_DISP_START0, (start & 0xff));
363 s1d13xxxfb_writereg(par, S1DREG_LCD_DISP_START1, ((start >> 8) & 0xff));
364 s1d13xxxfb_writereg(par, S1DREG_LCD_DISP_START2, ((start >> 16) & 0x0f));
365 } else {
366 /* CRT */
367 s1d13xxxfb_writereg(par, S1DREG_CRT_DISP_START0, (start & 0xff));
368 s1d13xxxfb_writereg(par, S1DREG_CRT_DISP_START1, ((start >> 8) & 0xff));
369 s1d13xxxfb_writereg(par, S1DREG_CRT_DISP_START2, ((start >> 16) & 0x0f));
370 }
371
372 return 0;
373}
374
375
376/* framebuffer information structures */
377
378static struct fb_ops s1d13xxxfb_fbops = {
379 .owner = THIS_MODULE,
380 .fb_set_par = s1d13xxxfb_set_par,
381 .fb_setcolreg = s1d13xxxfb_setcolreg,
382 .fb_blank = s1d13xxxfb_blank,
383
384 .fb_pan_display = s1d13xxxfb_pan_display,
385
386 /* to be replaced by any acceleration we can */
387 .fb_fillrect = cfb_fillrect,
388 .fb_copyarea = cfb_copyarea,
389 .fb_imageblit = cfb_imageblit,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700390};
391
392static int s1d13xxxfb_width_tab[2][4] __devinitdata = {
393 {4, 8, 16, -1},
394 {9, 12, 18, -1},
395};
396
397/**
398 * s1d13xxxfb_fetch_hw_state - Configure the framebuffer according to
399 * hardware setup.
400 * @info: frame buffer structure
401 *
402 * We setup the framebuffer structures according to the current
403 * hardware setup. On some machines, the BIOS will have filled
404 * the chip registers with such info, on others, these values will
405 * have been written in some init procedure. In any case, the
406 * software values needs to match the hardware ones. This is what
407 * this function ensures.
408 *
409 * Note: some of the hardcoded values here might need some love to
410 * work on various chips, and might need to no longer be hardcoded.
411 */
412static void __devinit
413s1d13xxxfb_fetch_hw_state(struct fb_info *info)
414{
415 struct fb_var_screeninfo *var = &info->var;
416 struct fb_fix_screeninfo *fix = &info->fix;
417 struct s1d13xxxfb_par *par = info->par;
418 u8 panel, display;
419 u16 offset;
420 u32 xres, yres;
421 u32 xres_virtual, yres_virtual;
422 int bpp, lcd_bpp;
423 int is_color, is_dual, is_tft;
424 int lcd_enabled, crt_enabled;
425
426 fix->type = FB_TYPE_PACKED_PIXELS;
427
428 /* general info */
429 par->display = s1d13xxxfb_readreg(par, S1DREG_COM_DISP_MODE);
430 crt_enabled = (par->display & 0x02) != 0;
431 lcd_enabled = (par->display & 0x01) != 0;
432
433 if (lcd_enabled && crt_enabled)
434 printk(KERN_WARNING PFX "Warning: LCD and CRT detected, using LCD\n");
435
436 if (lcd_enabled)
437 display = s1d13xxxfb_readreg(par, S1DREG_LCD_DISP_MODE);
438 else /* CRT */
439 display = s1d13xxxfb_readreg(par, S1DREG_CRT_DISP_MODE);
440
441 bpp = display & 0x07;
442
443 switch (bpp) {
444 case 2: /* 4 bpp */
445 case 3: /* 8 bpp */
446 var->bits_per_pixel = 8;
447 var->red.offset = var->green.offset = var->blue.offset = 0;
448 var->red.length = var->green.length = var->blue.length = 8;
449 break;
450 case 5: /* 16 bpp */
451 s1d13xxxfb_setup_truecolour(info);
452 break;
453 default:
454 dbg("bpp: %i\n", bpp);
455 }
456 fb_alloc_cmap(&info->cmap, 256, 0);
457
458 /* LCD info */
459 panel = s1d13xxxfb_readreg(par, S1DREG_PANEL_TYPE);
460 is_color = (panel & 0x04) != 0;
461 is_dual = (panel & 0x02) != 0;
462 is_tft = (panel & 0x01) != 0;
463 lcd_bpp = s1d13xxxfb_width_tab[is_tft][(panel >> 4) & 3];
464
465 if (lcd_enabled) {
466 xres = (s1d13xxxfb_readreg(par, S1DREG_LCD_DISP_HWIDTH) + 1) * 8;
467 yres = (s1d13xxxfb_readreg(par, S1DREG_LCD_DISP_VHEIGHT0) +
468 ((s1d13xxxfb_readreg(par, S1DREG_LCD_DISP_VHEIGHT1) & 0x03) << 8) + 1);
469
470 offset = (s1d13xxxfb_readreg(par, S1DREG_LCD_MEM_OFF0) +
471 ((s1d13xxxfb_readreg(par, S1DREG_LCD_MEM_OFF1) & 0x7) << 8));
472 } else { /* crt */
473 xres = (s1d13xxxfb_readreg(par, S1DREG_CRT_DISP_HWIDTH) + 1) * 8;
474 yres = (s1d13xxxfb_readreg(par, S1DREG_CRT_DISP_VHEIGHT0) +
475 ((s1d13xxxfb_readreg(par, S1DREG_CRT_DISP_VHEIGHT1) & 0x03) << 8) + 1);
476
477 offset = (s1d13xxxfb_readreg(par, S1DREG_CRT_MEM_OFF0) +
478 ((s1d13xxxfb_readreg(par, S1DREG_CRT_MEM_OFF1) & 0x7) << 8));
479 }
480 xres_virtual = offset * 16 / var->bits_per_pixel;
481 yres_virtual = fix->smem_len / (offset * 2);
482
483 var->xres = xres;
484 var->yres = yres;
485 var->xres_virtual = xres_virtual;
486 var->yres_virtual = yres_virtual;
487 var->xoffset = var->yoffset = 0;
488
489 fix->line_length = offset * 2;
490
491 var->grayscale = !is_color;
492
493 var->activate = FB_ACTIVATE_NOW;
494
495 dbg(PFX "bpp=%d, lcd_bpp=%d, "
496 "crt_enabled=%d, lcd_enabled=%d\n",
497 var->bits_per_pixel, lcd_bpp, crt_enabled, lcd_enabled);
498 dbg(PFX "xres=%d, yres=%d, vxres=%d, vyres=%d "
499 "is_color=%d, is_dual=%d, is_tft=%d\n",
500 xres, yres, xres_virtual, yres_virtual, is_color, is_dual, is_tft);
501}
502
503
Andrew Morton27f931d2005-06-21 17:16:55 -0700504static int
Russell King3ae5eae2005-11-09 22:32:44 +0000505s1d13xxxfb_remove(struct platform_device *pdev)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700506{
Russell King3ae5eae2005-11-09 22:32:44 +0000507 struct fb_info *info = platform_get_drvdata(pdev);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700508 struct s1d13xxxfb_par *par = NULL;
509
510 if (info) {
511 par = info->par;
512 if (par && par->regs) {
513 /* disable output & enable powersave */
514 s1d13xxxfb_writereg(par, S1DREG_COM_DISP_MODE, 0x00);
515 s1d13xxxfb_writereg(par, S1DREG_PS_CNF, 0x11);
516 iounmap(par->regs);
517 }
518
519 fb_dealloc_cmap(&info->cmap);
520
521 if (info->screen_base)
522 iounmap(info->screen_base);
523
524 framebuffer_release(info);
525 }
526
527 release_mem_region(pdev->resource[0].start,
528 pdev->resource[0].end - pdev->resource[0].start +1);
529 release_mem_region(pdev->resource[1].start,
530 pdev->resource[1].end - pdev->resource[1].start +1);
531 return 0;
532}
533
534static int __devinit
Russell King3ae5eae2005-11-09 22:32:44 +0000535s1d13xxxfb_probe(struct platform_device *pdev)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700536{
Linus Torvalds1da177e2005-04-16 15:20:36 -0700537 struct s1d13xxxfb_par *default_par;
538 struct fb_info *info;
539 struct s1d13xxxfb_pdata *pdata = NULL;
540 int ret = 0;
541 u8 revision;
542
543 dbg("probe called: device is %p\n", dev);
544
545 printk(KERN_INFO "Epson S1D13XXX FB Driver\n");
546
547 /* enable platform-dependent hardware glue, if any */
Russell King3ae5eae2005-11-09 22:32:44 +0000548 if (pdev->dev.platform_data)
549 pdata = pdev->dev.platform_data;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700550
551 if (pdata && pdata->platform_init_video)
552 pdata->platform_init_video();
553
554
555 if (pdev->num_resources != 2) {
556 dev_err(&pdev->dev, "invalid num_resources: %i\n",
557 pdev->num_resources);
558 ret = -ENODEV;
559 goto bail;
560 }
561
562 /* resource[0] is VRAM, resource[1] is registers */
563 if (pdev->resource[0].flags != IORESOURCE_MEM
564 || pdev->resource[1].flags != IORESOURCE_MEM) {
565 dev_err(&pdev->dev, "invalid resource type\n");
566 ret = -ENODEV;
567 goto bail;
568 }
569
570 if (!request_mem_region(pdev->resource[0].start,
571 pdev->resource[0].end - pdev->resource[0].start +1, "s1d13xxxfb mem")) {
Russell King3ae5eae2005-11-09 22:32:44 +0000572 dev_dbg(&pdev->dev, "request_mem_region failed\n");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700573 ret = -EBUSY;
574 goto bail;
575 }
576
577 if (!request_mem_region(pdev->resource[1].start,
578 pdev->resource[1].end - pdev->resource[1].start +1, "s1d13xxxfb regs")) {
Russell King3ae5eae2005-11-09 22:32:44 +0000579 dev_dbg(&pdev->dev, "request_mem_region failed\n");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700580 ret = -EBUSY;
581 goto bail;
582 }
583
584 info = framebuffer_alloc(sizeof(struct s1d13xxxfb_par) + sizeof(u32) * 256, &pdev->dev);
585 if (!info) {
586 ret = -ENOMEM;
587 goto bail;
588 }
589
Antonino A. Daplas98365f52006-03-11 03:27:23 -0800590 platform_set_drvdata(pdev, info);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700591 default_par = info->par;
592 default_par->regs = ioremap_nocache(pdev->resource[1].start,
593 pdev->resource[1].end - pdev->resource[1].start +1);
594 if (!default_par->regs) {
595 printk(KERN_ERR PFX "unable to map registers\n");
596 ret = -ENOMEM;
597 goto bail;
598 }
599 info->pseudo_palette = default_par->pseudo_palette;
600
601 info->screen_base = ioremap_nocache(pdev->resource[0].start,
602 pdev->resource[0].end - pdev->resource[0].start +1);
603
604 if (!info->screen_base) {
605 printk(KERN_ERR PFX "unable to map framebuffer\n");
606 ret = -ENOMEM;
607 goto bail;
608 }
609
610 revision = s1d13xxxfb_readreg(default_par, S1DREG_REV_CODE);
611 if ((revision >> 2) != S1D_CHIP_REV) {
612 printk(KERN_INFO PFX "chip not found: %i\n", (revision >> 2));
613 ret = -ENODEV;
614 goto bail;
615 }
616
617 info->fix = s1d13xxxfb_fix;
618 info->fix.mmio_start = pdev->resource[1].start;
619 info->fix.mmio_len = pdev->resource[1].end - pdev->resource[1].start +1;
620 info->fix.smem_start = pdev->resource[0].start;
621 info->fix.smem_len = pdev->resource[0].end - pdev->resource[0].start +1;
622
623 printk(KERN_INFO PFX "regs mapped at 0x%p, fb %d KiB mapped at 0x%p\n",
624 default_par->regs, info->fix.smem_len / 1024, info->screen_base);
625
626 info->par = default_par;
627 info->fbops = &s1d13xxxfb_fbops;
628 info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
629
630 /* perform "manual" chip initialization, if needed */
631 if (pdata && pdata->initregs)
632 s1d13xxxfb_runinit(info->par, pdata->initregs, pdata->initregssize);
633
634 s1d13xxxfb_fetch_hw_state(info);
635
636 if (register_framebuffer(info) < 0) {
637 ret = -EINVAL;
638 goto bail;
639 }
640
Linus Torvalds1da177e2005-04-16 15:20:36 -0700641 printk(KERN_INFO "fb%d: %s frame buffer device\n",
642 info->node, info->fix.id);
643
644 return 0;
645
646bail:
Russell King3ae5eae2005-11-09 22:32:44 +0000647 s1d13xxxfb_remove(pdev);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700648 return ret;
649
650}
651
652#ifdef CONFIG_PM
Russell King3ae5eae2005-11-09 22:32:44 +0000653static int s1d13xxxfb_suspend(struct platform_device *dev, pm_message_t state)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700654{
Russell King3ae5eae2005-11-09 22:32:44 +0000655 struct fb_info *info = platform_get_drvdata(dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700656 struct s1d13xxxfb_par *s1dfb = info->par;
657 struct s1d13xxxfb_pdata *pdata = NULL;
658
659 /* disable display */
660 lcd_enable(s1dfb, 0);
661 crt_enable(s1dfb, 0);
662
Russell King3ae5eae2005-11-09 22:32:44 +0000663 if (dev->dev.platform_data)
664 pdata = dev->dev.platform_data;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700665
666#if 0
667 if (!s1dfb->disp_save)
668 s1dfb->disp_save = kmalloc(info->fix.smem_len, GFP_KERNEL);
669
670 if (!s1dfb->disp_save) {
671 printk(KERN_ERR PFX "no memory to save screen");
672 return -ENOMEM;
673 }
674
675 memcpy_fromio(s1dfb->disp_save, info->screen_base, info->fix.smem_len);
676#else
677 s1dfb->disp_save = NULL;
678#endif
679
680 if (!s1dfb->regs_save)
681 s1dfb->regs_save = kmalloc(info->fix.mmio_len, GFP_KERNEL);
682
683 if (!s1dfb->regs_save) {
684 printk(KERN_ERR PFX "no memory to save registers");
685 return -ENOMEM;
686 }
687
688 /* backup all registers */
689 memcpy_fromio(s1dfb->regs_save, s1dfb->regs, info->fix.mmio_len);
690
691 /* now activate power save mode */
692 s1d13xxxfb_writereg(s1dfb, S1DREG_PS_CNF, 0x11);
693
694 if (pdata && pdata->platform_suspend_video)
695 return pdata->platform_suspend_video();
696 else
697 return 0;
698}
699
Russell King3ae5eae2005-11-09 22:32:44 +0000700static int s1d13xxxfb_resume(struct platform_device *dev)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700701{
Russell King3ae5eae2005-11-09 22:32:44 +0000702 struct fb_info *info = platform_get_drvdata(dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700703 struct s1d13xxxfb_par *s1dfb = info->par;
704 struct s1d13xxxfb_pdata *pdata = NULL;
705
Linus Torvalds1da177e2005-04-16 15:20:36 -0700706 /* awaken the chip */
707 s1d13xxxfb_writereg(s1dfb, S1DREG_PS_CNF, 0x10);
708
709 /* do not let go until SDRAM "wakes up" */
710 while ((s1d13xxxfb_readreg(s1dfb, S1DREG_PS_STATUS) & 0x01))
711 udelay(10);
712
Russell King3ae5eae2005-11-09 22:32:44 +0000713 if (dev->dev.platform_data)
714 pdata = dev->dev.platform_data;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700715
716 if (s1dfb->regs_save) {
717 /* will write RO regs, *should* get away with it :) */
718 memcpy_toio(s1dfb->regs, s1dfb->regs_save, info->fix.mmio_len);
719 kfree(s1dfb->regs_save);
720 }
721
722 if (s1dfb->disp_save) {
723 memcpy_toio(info->screen_base, s1dfb->disp_save,
724 info->fix.smem_len);
725 kfree(s1dfb->disp_save); /* XXX kmalloc()'d when? */
726 }
727
728 if ((s1dfb->display & 0x01) != 0)
729 lcd_enable(s1dfb, 1);
730 if ((s1dfb->display & 0x02) != 0)
731 crt_enable(s1dfb, 1);
732
733 if (pdata && pdata->platform_resume_video)
734 return pdata->platform_resume_video();
735 else
736 return 0;
737}
738#endif /* CONFIG_PM */
739
Russell King3ae5eae2005-11-09 22:32:44 +0000740static struct platform_driver s1d13xxxfb_driver = {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700741 .probe = s1d13xxxfb_probe,
742 .remove = s1d13xxxfb_remove,
743#ifdef CONFIG_PM
744 .suspend = s1d13xxxfb_suspend,
Russell King3ae5eae2005-11-09 22:32:44 +0000745 .resume = s1d13xxxfb_resume,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700746#endif
Russell King3ae5eae2005-11-09 22:32:44 +0000747 .driver = {
748 .name = S1D_DEVICENAME,
749 },
Linus Torvalds1da177e2005-04-16 15:20:36 -0700750};
751
752
753static int __init
754s1d13xxxfb_init(void)
755{
756 if (fb_get_options("s1d13xxxfb", NULL))
757 return -ENODEV;
758
Russell King3ae5eae2005-11-09 22:32:44 +0000759 return platform_driver_register(&s1d13xxxfb_driver);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700760}
761
762
763static void __exit
764s1d13xxxfb_exit(void)
765{
Russell King3ae5eae2005-11-09 22:32:44 +0000766 platform_driver_unregister(&s1d13xxxfb_driver);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700767}
768
769module_init(s1d13xxxfb_init);
770module_exit(s1d13xxxfb_exit);
771
772
773MODULE_LICENSE("GPL");
774MODULE_DESCRIPTION("Framebuffer driver for S1D13xxx devices");
775MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>, Thibaut VARENE <varenet@parisc-linux.org>");