Ben Dooks | b497549 | 2008-07-03 12:32:51 +0100 | [diff] [blame] | 1 | /* linux/drivers/serial/s3c2440.c |
| 2 | * |
| 3 | * Driver for Samsung S3C2440 and S3C2442 SoC onboard UARTs. |
| 4 | * |
Ben Dooks | ccae941 | 2009-11-13 22:54:14 +0000 | [diff] [blame^] | 5 | * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics |
Ben Dooks | b497549 | 2008-07-03 12:32:51 +0100 | [diff] [blame] | 6 | * http://armlinux.simtec.co.uk/ |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or modify |
| 9 | * it under the terms of the GNU General Public License version 2 as |
| 10 | * published by the Free Software Foundation. |
| 11 | */ |
| 12 | |
| 13 | #include <linux/module.h> |
| 14 | #include <linux/ioport.h> |
| 15 | #include <linux/io.h> |
| 16 | #include <linux/platform_device.h> |
| 17 | #include <linux/init.h> |
| 18 | #include <linux/serial_core.h> |
| 19 | #include <linux/serial.h> |
| 20 | |
| 21 | #include <asm/irq.h> |
Russell King | a09e64f | 2008-08-05 16:14:15 +0100 | [diff] [blame] | 22 | #include <mach/hardware.h> |
Ben Dooks | b497549 | 2008-07-03 12:32:51 +0100 | [diff] [blame] | 23 | |
Ben Dooks | a2b7ba9 | 2008-10-07 22:26:09 +0100 | [diff] [blame] | 24 | #include <plat/regs-serial.h> |
Russell King | a09e64f | 2008-08-05 16:14:15 +0100 | [diff] [blame] | 25 | #include <mach/regs-gpio.h> |
Ben Dooks | b497549 | 2008-07-03 12:32:51 +0100 | [diff] [blame] | 26 | |
| 27 | #include "samsung.h" |
| 28 | |
| 29 | |
| 30 | static int s3c2440_serial_setsource(struct uart_port *port, |
| 31 | struct s3c24xx_uart_clksrc *clk) |
| 32 | { |
| 33 | unsigned long ucon = rd_regl(port, S3C2410_UCON); |
| 34 | |
| 35 | /* todo - proper fclk<>nonfclk switch. */ |
| 36 | |
| 37 | ucon &= ~S3C2440_UCON_CLKMASK; |
| 38 | |
| 39 | if (strcmp(clk->name, "uclk") == 0) |
| 40 | ucon |= S3C2440_UCON_UCLK; |
| 41 | else if (strcmp(clk->name, "pclk") == 0) |
| 42 | ucon |= S3C2440_UCON_PCLK; |
| 43 | else if (strcmp(clk->name, "fclk") == 0) |
| 44 | ucon |= S3C2440_UCON_FCLK; |
| 45 | else { |
| 46 | printk(KERN_ERR "unknown clock source %s\n", clk->name); |
| 47 | return -EINVAL; |
| 48 | } |
| 49 | |
| 50 | wr_regl(port, S3C2410_UCON, ucon); |
| 51 | return 0; |
| 52 | } |
| 53 | |
| 54 | |
| 55 | static int s3c2440_serial_getsource(struct uart_port *port, |
| 56 | struct s3c24xx_uart_clksrc *clk) |
| 57 | { |
| 58 | unsigned long ucon = rd_regl(port, S3C2410_UCON); |
| 59 | unsigned long ucon0, ucon1, ucon2; |
| 60 | |
| 61 | switch (ucon & S3C2440_UCON_CLKMASK) { |
| 62 | case S3C2440_UCON_UCLK: |
| 63 | clk->divisor = 1; |
| 64 | clk->name = "uclk"; |
| 65 | break; |
| 66 | |
| 67 | case S3C2440_UCON_PCLK: |
| 68 | case S3C2440_UCON_PCLK2: |
| 69 | clk->divisor = 1; |
| 70 | clk->name = "pclk"; |
| 71 | break; |
| 72 | |
| 73 | case S3C2440_UCON_FCLK: |
| 74 | /* the fun of calculating the uart divisors on |
| 75 | * the s3c2440 */ |
| 76 | |
| 77 | ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON); |
| 78 | ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON); |
| 79 | ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON); |
| 80 | |
| 81 | printk("ucons: %08lx, %08lx, %08lx\n", ucon0, ucon1, ucon2); |
| 82 | |
| 83 | ucon0 &= S3C2440_UCON0_DIVMASK; |
| 84 | ucon1 &= S3C2440_UCON1_DIVMASK; |
| 85 | ucon2 &= S3C2440_UCON2_DIVMASK; |
| 86 | |
| 87 | if (ucon0 != 0) { |
| 88 | clk->divisor = ucon0 >> S3C2440_UCON_DIVSHIFT; |
| 89 | clk->divisor += 6; |
| 90 | } else if (ucon1 != 0) { |
| 91 | clk->divisor = ucon1 >> S3C2440_UCON_DIVSHIFT; |
| 92 | clk->divisor += 21; |
| 93 | } else if (ucon2 != 0) { |
| 94 | clk->divisor = ucon2 >> S3C2440_UCON_DIVSHIFT; |
| 95 | clk->divisor += 36; |
| 96 | } else { |
| 97 | /* manual calims 44, seems to be 9 */ |
| 98 | clk->divisor = 9; |
| 99 | } |
| 100 | |
| 101 | clk->name = "fclk"; |
| 102 | break; |
| 103 | } |
| 104 | |
| 105 | return 0; |
| 106 | } |
| 107 | |
| 108 | static int s3c2440_serial_resetport(struct uart_port *port, |
| 109 | struct s3c2410_uartcfg *cfg) |
| 110 | { |
| 111 | unsigned long ucon = rd_regl(port, S3C2410_UCON); |
| 112 | |
| 113 | dbg("s3c2440_serial_resetport: port=%p (%08lx), cfg=%p\n", |
| 114 | port, port->mapbase, cfg); |
| 115 | |
| 116 | /* ensure we don't change the clock settings... */ |
| 117 | |
| 118 | ucon &= (S3C2440_UCON0_DIVMASK | (3<<10)); |
| 119 | |
| 120 | wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); |
| 121 | wr_regl(port, S3C2410_ULCON, cfg->ulcon); |
| 122 | |
| 123 | /* reset both fifos */ |
| 124 | |
| 125 | wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); |
| 126 | wr_regl(port, S3C2410_UFCON, cfg->ufcon); |
| 127 | |
| 128 | return 0; |
| 129 | } |
| 130 | |
| 131 | static struct s3c24xx_uart_info s3c2440_uart_inf = { |
| 132 | .name = "Samsung S3C2440 UART", |
| 133 | .type = PORT_S3C2440, |
| 134 | .fifosize = 64, |
| 135 | .rx_fifomask = S3C2440_UFSTAT_RXMASK, |
| 136 | .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, |
| 137 | .rx_fifofull = S3C2440_UFSTAT_RXFULL, |
| 138 | .tx_fifofull = S3C2440_UFSTAT_TXFULL, |
| 139 | .tx_fifomask = S3C2440_UFSTAT_TXMASK, |
| 140 | .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, |
| 141 | .get_clksrc = s3c2440_serial_getsource, |
| 142 | .set_clksrc = s3c2440_serial_setsource, |
| 143 | .reset_port = s3c2440_serial_resetport, |
| 144 | }; |
| 145 | |
| 146 | /* device management */ |
| 147 | |
| 148 | static int s3c2440_serial_probe(struct platform_device *dev) |
| 149 | { |
| 150 | dbg("s3c2440_serial_probe: dev=%p\n", dev); |
| 151 | return s3c24xx_serial_probe(dev, &s3c2440_uart_inf); |
| 152 | } |
| 153 | |
Ramax Lo | 8fe70a5 | 2009-07-09 16:28:33 +0800 | [diff] [blame] | 154 | static struct platform_driver s3c2440_serial_driver = { |
Ben Dooks | b497549 | 2008-07-03 12:32:51 +0100 | [diff] [blame] | 155 | .probe = s3c2440_serial_probe, |
Peter Korsgaard | 90ceb964 | 2009-06-22 18:42:49 +0100 | [diff] [blame] | 156 | .remove = __devexit_p(s3c24xx_serial_remove), |
Ben Dooks | b497549 | 2008-07-03 12:32:51 +0100 | [diff] [blame] | 157 | .driver = { |
| 158 | .name = "s3c2440-uart", |
| 159 | .owner = THIS_MODULE, |
| 160 | }, |
| 161 | }; |
| 162 | |
Ramax Lo | 8fe70a5 | 2009-07-09 16:28:33 +0800 | [diff] [blame] | 163 | s3c24xx_console_init(&s3c2440_serial_driver, &s3c2440_uart_inf); |
Ben Dooks | b497549 | 2008-07-03 12:32:51 +0100 | [diff] [blame] | 164 | |
| 165 | static int __init s3c2440_serial_init(void) |
| 166 | { |
Ramax Lo | 8fe70a5 | 2009-07-09 16:28:33 +0800 | [diff] [blame] | 167 | return s3c24xx_serial_init(&s3c2440_serial_driver, &s3c2440_uart_inf); |
Ben Dooks | b497549 | 2008-07-03 12:32:51 +0100 | [diff] [blame] | 168 | } |
| 169 | |
| 170 | static void __exit s3c2440_serial_exit(void) |
| 171 | { |
Ramax Lo | 8fe70a5 | 2009-07-09 16:28:33 +0800 | [diff] [blame] | 172 | platform_driver_unregister(&s3c2440_serial_driver); |
Ben Dooks | b497549 | 2008-07-03 12:32:51 +0100 | [diff] [blame] | 173 | } |
| 174 | |
| 175 | module_init(s3c2440_serial_init); |
| 176 | module_exit(s3c2440_serial_exit); |
| 177 | |
| 178 | MODULE_DESCRIPTION("Samsung S3C2440,S3C2442 SoC Serial port driver"); |
| 179 | MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); |
Balaji Rao | 52b9582 | 2008-12-09 13:14:22 -0800 | [diff] [blame] | 180 | MODULE_LICENSE("GPL v2"); |
Ben Dooks | b497549 | 2008-07-03 12:32:51 +0100 | [diff] [blame] | 181 | MODULE_ALIAS("platform:s3c2440-uart"); |