Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | /* |
| 2 | sis96x.c - Part of lm_sensors, Linux kernel modules for hardware |
| 3 | monitoring |
| 4 | |
| 5 | Copyright (c) 2003 Mark M. Hoffman <mhoffman@lightlink.com> |
| 6 | |
| 7 | This program is free software; you can redistribute it and/or modify |
| 8 | it under the terms of the GNU General Public License as published by |
| 9 | the Free Software Foundation; either version 2 of the License, or |
| 10 | (at your option) any later version. |
| 11 | |
| 12 | This program is distributed in the hope that it will be useful, |
| 13 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 14 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 15 | GNU General Public License for more details. |
| 16 | |
| 17 | You should have received a copy of the GNU General Public License |
| 18 | along with this program; if not, write to the Free Software |
| 19 | Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| 20 | */ |
| 21 | |
| 22 | /* |
| 23 | This module must be considered BETA unless and until |
| 24 | the chipset manufacturer releases a datasheet. |
| 25 | The register definitions are based on the SiS630. |
| 26 | |
| 27 | This module relies on quirk_sis_96x_smbus (drivers/pci/quirks.c) |
| 28 | for just about every machine for which users have reported. |
| 29 | If this module isn't detecting your 96x south bridge, have a |
| 30 | look there. |
| 31 | |
| 32 | We assume there can only be one SiS96x with one SMBus interface. |
| 33 | */ |
| 34 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 35 | #include <linux/module.h> |
| 36 | #include <linux/pci.h> |
| 37 | #include <linux/kernel.h> |
| 38 | #include <linux/delay.h> |
| 39 | #include <linux/stddef.h> |
| 40 | #include <linux/sched.h> |
| 41 | #include <linux/ioport.h> |
| 42 | #include <linux/i2c.h> |
| 43 | #include <linux/init.h> |
| 44 | #include <asm/io.h> |
| 45 | |
| 46 | /* |
| 47 | HISTORY: |
| 48 | 2003-05-11 1.0.0 Updated from lm_sensors project for kernel 2.5 |
| 49 | (was i2c-sis645.c from lm_sensors 2.7.0) |
| 50 | */ |
| 51 | #define SIS96x_VERSION "1.0.0" |
| 52 | |
| 53 | /* base address register in PCI config space */ |
| 54 | #define SIS96x_BAR 0x04 |
| 55 | |
| 56 | /* SiS96x SMBus registers */ |
| 57 | #define SMB_STS 0x00 |
| 58 | #define SMB_EN 0x01 |
| 59 | #define SMB_CNT 0x02 |
| 60 | #define SMB_HOST_CNT 0x03 |
| 61 | #define SMB_ADDR 0x04 |
| 62 | #define SMB_CMD 0x05 |
| 63 | #define SMB_PCOUNT 0x06 |
| 64 | #define SMB_COUNT 0x07 |
| 65 | #define SMB_BYTE 0x08 |
| 66 | #define SMB_DEV_ADDR 0x10 |
| 67 | #define SMB_DB0 0x11 |
| 68 | #define SMB_DB1 0x12 |
| 69 | #define SMB_SAA 0x13 |
| 70 | |
| 71 | /* register count for request_region */ |
| 72 | #define SMB_IOSIZE 0x20 |
| 73 | |
| 74 | /* Other settings */ |
| 75 | #define MAX_TIMEOUT 500 |
| 76 | |
| 77 | /* SiS96x SMBus constants */ |
| 78 | #define SIS96x_QUICK 0x00 |
| 79 | #define SIS96x_BYTE 0x01 |
| 80 | #define SIS96x_BYTE_DATA 0x02 |
| 81 | #define SIS96x_WORD_DATA 0x03 |
| 82 | #define SIS96x_PROC_CALL 0x04 |
| 83 | #define SIS96x_BLOCK_DATA 0x05 |
| 84 | |
Jean Delvare | d6072f8 | 2005-09-25 16:37:04 +0200 | [diff] [blame] | 85 | static struct pci_driver sis96x_driver; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 86 | static struct i2c_adapter sis96x_adapter; |
Jean Delvare | 6050709 | 2005-09-25 16:23:07 +0200 | [diff] [blame] | 87 | static u16 sis96x_smbus_base; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 88 | |
| 89 | static inline u8 sis96x_read(u8 reg) |
| 90 | { |
| 91 | return inb(sis96x_smbus_base + reg) ; |
| 92 | } |
| 93 | |
| 94 | static inline void sis96x_write(u8 reg, u8 data) |
| 95 | { |
| 96 | outb(data, sis96x_smbus_base + reg) ; |
| 97 | } |
| 98 | |
| 99 | /* Execute a SMBus transaction. |
| 100 | int size is from SIS96x_QUICK to SIS96x_BLOCK_DATA |
| 101 | */ |
| 102 | static int sis96x_transaction(int size) |
| 103 | { |
| 104 | int temp; |
| 105 | int result = 0; |
| 106 | int timeout = 0; |
| 107 | |
| 108 | dev_dbg(&sis96x_adapter.dev, "SMBus transaction %d\n", size); |
| 109 | |
| 110 | /* Make sure the SMBus host is ready to start transmitting */ |
| 111 | if (((temp = sis96x_read(SMB_CNT)) & 0x03) != 0x00) { |
| 112 | |
| 113 | dev_dbg(&sis96x_adapter.dev, "SMBus busy (0x%02x). " |
| 114 | "Resetting...\n", temp); |
| 115 | |
| 116 | /* kill the transaction */ |
| 117 | sis96x_write(SMB_HOST_CNT, 0x20); |
| 118 | |
| 119 | /* check it again */ |
| 120 | if (((temp = sis96x_read(SMB_CNT)) & 0x03) != 0x00) { |
| 121 | dev_dbg(&sis96x_adapter.dev, "Failed (0x%02x)\n", temp); |
| 122 | return -1; |
| 123 | } else { |
| 124 | dev_dbg(&sis96x_adapter.dev, "Successful\n"); |
| 125 | } |
| 126 | } |
| 127 | |
| 128 | /* Turn off timeout interrupts, set fast host clock */ |
| 129 | sis96x_write(SMB_CNT, 0x20); |
| 130 | |
| 131 | /* clear all (sticky) status flags */ |
| 132 | temp = sis96x_read(SMB_STS); |
| 133 | sis96x_write(SMB_STS, temp & 0x1e); |
| 134 | |
| 135 | /* start the transaction by setting bit 4 and size bits */ |
| 136 | sis96x_write(SMB_HOST_CNT, 0x10 | (size & 0x07)); |
| 137 | |
| 138 | /* We will always wait for a fraction of a second! */ |
| 139 | do { |
| 140 | msleep(1); |
| 141 | temp = sis96x_read(SMB_STS); |
| 142 | } while (!(temp & 0x0e) && (timeout++ < MAX_TIMEOUT)); |
| 143 | |
| 144 | /* If the SMBus is still busy, we give up */ |
| 145 | if (timeout >= MAX_TIMEOUT) { |
| 146 | dev_dbg(&sis96x_adapter.dev, "SMBus Timeout! (0x%02x)\n", temp); |
| 147 | result = -1; |
| 148 | } |
| 149 | |
| 150 | /* device error - probably missing ACK */ |
| 151 | if (temp & 0x02) { |
| 152 | dev_dbg(&sis96x_adapter.dev, "Failed bus transaction!\n"); |
| 153 | result = -1; |
| 154 | } |
| 155 | |
| 156 | /* bus collision */ |
| 157 | if (temp & 0x04) { |
| 158 | dev_dbg(&sis96x_adapter.dev, "Bus collision!\n"); |
| 159 | result = -1; |
| 160 | } |
| 161 | |
| 162 | /* Finish up by resetting the bus */ |
| 163 | sis96x_write(SMB_STS, temp); |
| 164 | if ((temp = sis96x_read(SMB_STS))) { |
| 165 | dev_dbg(&sis96x_adapter.dev, "Failed reset at " |
| 166 | "end of transaction! (0x%02x)\n", temp); |
| 167 | } |
| 168 | |
| 169 | return result; |
| 170 | } |
| 171 | |
| 172 | /* Return -1 on error. */ |
| 173 | static s32 sis96x_access(struct i2c_adapter * adap, u16 addr, |
| 174 | unsigned short flags, char read_write, |
| 175 | u8 command, int size, union i2c_smbus_data * data) |
| 176 | { |
| 177 | |
| 178 | switch (size) { |
| 179 | case I2C_SMBUS_QUICK: |
| 180 | sis96x_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01)); |
| 181 | size = SIS96x_QUICK; |
| 182 | break; |
| 183 | |
| 184 | case I2C_SMBUS_BYTE: |
| 185 | sis96x_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01)); |
| 186 | if (read_write == I2C_SMBUS_WRITE) |
| 187 | sis96x_write(SMB_CMD, command); |
| 188 | size = SIS96x_BYTE; |
| 189 | break; |
| 190 | |
| 191 | case I2C_SMBUS_BYTE_DATA: |
| 192 | sis96x_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01)); |
| 193 | sis96x_write(SMB_CMD, command); |
| 194 | if (read_write == I2C_SMBUS_WRITE) |
| 195 | sis96x_write(SMB_BYTE, data->byte); |
| 196 | size = SIS96x_BYTE_DATA; |
| 197 | break; |
| 198 | |
| 199 | case I2C_SMBUS_PROC_CALL: |
| 200 | case I2C_SMBUS_WORD_DATA: |
| 201 | sis96x_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01)); |
| 202 | sis96x_write(SMB_CMD, command); |
| 203 | if (read_write == I2C_SMBUS_WRITE) { |
| 204 | sis96x_write(SMB_BYTE, data->word & 0xff); |
| 205 | sis96x_write(SMB_BYTE + 1, (data->word & 0xff00) >> 8); |
| 206 | } |
| 207 | size = (size == I2C_SMBUS_PROC_CALL ? |
| 208 | SIS96x_PROC_CALL : SIS96x_WORD_DATA); |
| 209 | break; |
| 210 | |
| 211 | case I2C_SMBUS_BLOCK_DATA: |
| 212 | /* TO DO: */ |
| 213 | dev_info(&adap->dev, "SMBus block not implemented!\n"); |
| 214 | return -1; |
| 215 | break; |
| 216 | |
| 217 | default: |
| 218 | dev_info(&adap->dev, "Unsupported I2C size\n"); |
| 219 | return -1; |
| 220 | break; |
| 221 | } |
| 222 | |
| 223 | if (sis96x_transaction(size)) |
| 224 | return -1; |
| 225 | |
| 226 | if ((size != SIS96x_PROC_CALL) && |
| 227 | ((read_write == I2C_SMBUS_WRITE) || (size == SIS96x_QUICK))) |
| 228 | return 0; |
| 229 | |
| 230 | switch (size) { |
| 231 | case SIS96x_BYTE: |
| 232 | case SIS96x_BYTE_DATA: |
| 233 | data->byte = sis96x_read(SMB_BYTE); |
| 234 | break; |
| 235 | |
| 236 | case SIS96x_WORD_DATA: |
| 237 | case SIS96x_PROC_CALL: |
| 238 | data->word = sis96x_read(SMB_BYTE) + |
| 239 | (sis96x_read(SMB_BYTE + 1) << 8); |
| 240 | break; |
| 241 | } |
| 242 | return 0; |
| 243 | } |
| 244 | |
| 245 | static u32 sis96x_func(struct i2c_adapter *adapter) |
| 246 | { |
| 247 | return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | |
| 248 | I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | |
| 249 | I2C_FUNC_SMBUS_PROC_CALL; |
| 250 | } |
| 251 | |
| 252 | static struct i2c_algorithm smbus_algorithm = { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 253 | .smbus_xfer = sis96x_access, |
| 254 | .functionality = sis96x_func, |
| 255 | }; |
| 256 | |
| 257 | static struct i2c_adapter sis96x_adapter = { |
| 258 | .owner = THIS_MODULE, |
| 259 | .class = I2C_CLASS_HWMON, |
| 260 | .algo = &smbus_algorithm, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 261 | }; |
| 262 | |
| 263 | static struct pci_device_id sis96x_ids[] = { |
| 264 | { PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_SMBUS) }, |
| 265 | { 0, } |
| 266 | }; |
| 267 | |
| 268 | MODULE_DEVICE_TABLE (pci, sis96x_ids); |
| 269 | |
| 270 | static int __devinit sis96x_probe(struct pci_dev *dev, |
| 271 | const struct pci_device_id *id) |
| 272 | { |
| 273 | u16 ww = 0; |
| 274 | int retval; |
| 275 | |
| 276 | if (sis96x_smbus_base) { |
| 277 | dev_err(&dev->dev, "Only one device supported.\n"); |
| 278 | return -EBUSY; |
| 279 | } |
| 280 | |
| 281 | pci_read_config_word(dev, PCI_CLASS_DEVICE, &ww); |
| 282 | if (PCI_CLASS_SERIAL_SMBUS != ww) { |
| 283 | dev_err(&dev->dev, "Unsupported device class 0x%04x!\n", ww); |
| 284 | return -ENODEV; |
| 285 | } |
| 286 | |
| 287 | sis96x_smbus_base = pci_resource_start(dev, SIS96x_BAR); |
| 288 | if (!sis96x_smbus_base) { |
| 289 | dev_err(&dev->dev, "SiS96x SMBus base address " |
| 290 | "not initialized!\n"); |
| 291 | return -EINVAL; |
| 292 | } |
| 293 | dev_info(&dev->dev, "SiS96x SMBus base address: 0x%04x\n", |
| 294 | sis96x_smbus_base); |
| 295 | |
| 296 | /* Everything is happy, let's grab the memory and set things up. */ |
Jean Delvare | d6072f8 | 2005-09-25 16:37:04 +0200 | [diff] [blame] | 297 | if (!request_region(sis96x_smbus_base, SMB_IOSIZE, |
| 298 | sis96x_driver.name)) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 299 | dev_err(&dev->dev, "SMBus registers 0x%04x-0x%04x " |
| 300 | "already in use!\n", sis96x_smbus_base, |
| 301 | sis96x_smbus_base + SMB_IOSIZE - 1); |
| 302 | |
| 303 | sis96x_smbus_base = 0; |
| 304 | return -EINVAL; |
| 305 | } |
| 306 | |
| 307 | /* set up the driverfs linkage to our parent device */ |
| 308 | sis96x_adapter.dev.parent = &dev->dev; |
| 309 | |
| 310 | snprintf(sis96x_adapter.name, I2C_NAME_SIZE, |
| 311 | "SiS96x SMBus adapter at 0x%04x", sis96x_smbus_base); |
| 312 | |
| 313 | if ((retval = i2c_add_adapter(&sis96x_adapter))) { |
| 314 | dev_err(&dev->dev, "Couldn't register adapter!\n"); |
| 315 | release_region(sis96x_smbus_base, SMB_IOSIZE); |
| 316 | sis96x_smbus_base = 0; |
| 317 | } |
| 318 | |
| 319 | return retval; |
| 320 | } |
| 321 | |
| 322 | static void __devexit sis96x_remove(struct pci_dev *dev) |
| 323 | { |
| 324 | if (sis96x_smbus_base) { |
| 325 | i2c_del_adapter(&sis96x_adapter); |
| 326 | release_region(sis96x_smbus_base, SMB_IOSIZE); |
| 327 | sis96x_smbus_base = 0; |
| 328 | } |
| 329 | } |
| 330 | |
| 331 | static struct pci_driver sis96x_driver = { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 332 | .name = "sis96x_smbus", |
| 333 | .id_table = sis96x_ids, |
| 334 | .probe = sis96x_probe, |
| 335 | .remove = __devexit_p(sis96x_remove), |
| 336 | }; |
| 337 | |
| 338 | static int __init i2c_sis96x_init(void) |
| 339 | { |
| 340 | printk(KERN_INFO "i2c-sis96x version %s\n", SIS96x_VERSION); |
| 341 | return pci_register_driver(&sis96x_driver); |
| 342 | } |
| 343 | |
| 344 | static void __exit i2c_sis96x_exit(void) |
| 345 | { |
| 346 | pci_unregister_driver(&sis96x_driver); |
| 347 | } |
| 348 | |
| 349 | MODULE_AUTHOR("Mark M. Hoffman <mhoffman@lightlink.com>"); |
| 350 | MODULE_DESCRIPTION("SiS96x SMBus driver"); |
| 351 | MODULE_LICENSE("GPL"); |
| 352 | |
| 353 | /* Register initialization functions using helper macros */ |
| 354 | module_init(i2c_sis96x_init); |
| 355 | module_exit(i2c_sis96x_exit); |
| 356 | |