Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 1 | /* |
| 2 | Conexant cx24123/cx24109 - DVB QPSK Satellite demod/tuner driver |
| 3 | |
| 4 | Copyright (C) 2005 Steven Toth <stoth@hauppauge.com> |
| 5 | |
Vadim Catana | 1c956a3 | 2006-01-09 15:25:08 -0200 | [diff] [blame] | 6 | Support for KWorld DVB-S 100 by Vadim Catana <skystar@moldova.cc> |
| 7 | |
Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 8 | This program is free software; you can redistribute it and/or modify |
| 9 | it under the terms of the GNU General Public License as published by |
| 10 | the Free Software Foundation; either version 2 of the License, or |
| 11 | (at your option) any later version. |
| 12 | |
| 13 | This program is distributed in the hope that it will be useful, |
| 14 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 15 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 16 | GNU General Public License for more details. |
| 17 | |
| 18 | You should have received a copy of the GNU General Public License |
| 19 | along with this program; if not, write to the Free Software |
| 20 | Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| 21 | */ |
| 22 | |
| 23 | #include <linux/slab.h> |
| 24 | #include <linux/kernel.h> |
| 25 | #include <linux/module.h> |
| 26 | #include <linux/moduleparam.h> |
| 27 | #include <linux/init.h> |
| 28 | |
| 29 | #include "dvb_frontend.h" |
| 30 | #include "cx24123.h" |
| 31 | |
| 32 | static int debug; |
| 33 | #define dprintk(args...) \ |
| 34 | do { \ |
| 35 | if (debug) printk (KERN_DEBUG "cx24123: " args); \ |
| 36 | } while (0) |
| 37 | |
Johannes Stezenbach | e3b152b | 2006-01-09 15:25:08 -0200 | [diff] [blame] | 38 | struct cx24123_state |
| 39 | { |
Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 40 | struct i2c_adapter* i2c; |
| 41 | struct dvb_frontend_ops ops; |
| 42 | const struct cx24123_config* config; |
| 43 | |
| 44 | struct dvb_frontend frontend; |
| 45 | |
| 46 | u32 lastber; |
| 47 | u16 snr; |
| 48 | u8 lnbreg; |
| 49 | |
| 50 | /* Some PLL specifics for tuning */ |
| 51 | u32 VCAarg; |
| 52 | u32 VGAarg; |
| 53 | u32 bandselectarg; |
| 54 | u32 pllarg; |
| 55 | |
| 56 | /* The Demod/Tuner can't easily provide these, we cache them */ |
| 57 | u32 currentfreq; |
| 58 | u32 currentsymbolrate; |
| 59 | }; |
| 60 | |
Johannes Stezenbach | e3b152b | 2006-01-09 15:25:08 -0200 | [diff] [blame] | 61 | /* Various tuner defaults need to be established for a given symbol rate Sps */ |
| 62 | static struct |
| 63 | { |
| 64 | u32 symbolrate_low; |
| 65 | u32 symbolrate_high; |
| 66 | u32 VCAslope; |
| 67 | u32 VCAoffset; |
| 68 | u32 VGA1offset; |
| 69 | u32 VGA2offset; |
| 70 | u32 VCAprogdata; |
| 71 | u32 VGAprogdata; |
| 72 | } cx24123_AGC_vals[] = |
| 73 | { |
| 74 | { |
| 75 | .symbolrate_low = 1000000, |
| 76 | .symbolrate_high = 4999999, |
| 77 | .VCAslope = 0x07, |
| 78 | .VCAoffset = 0x0f, |
| 79 | .VGA1offset = 0x1f8, |
| 80 | .VGA2offset = 0x1f8, |
| 81 | .VGAprogdata = (2 << 18) | (0x1f8 << 9) | 0x1f8, |
| 82 | .VCAprogdata = (4 << 18) | (0x07 << 9) | 0x07, |
| 83 | }, |
| 84 | { |
| 85 | .symbolrate_low = 5000000, |
| 86 | .symbolrate_high = 14999999, |
| 87 | .VCAslope = 0x1f, |
| 88 | .VCAoffset = 0x1f, |
| 89 | .VGA1offset = 0x1e0, |
| 90 | .VGA2offset = 0x180, |
| 91 | .VGAprogdata = (2 << 18) | (0x180 << 9) | 0x1e0, |
| 92 | .VCAprogdata = (4 << 18) | (0x07 << 9) | 0x1f, |
| 93 | }, |
| 94 | { |
| 95 | .symbolrate_low = 15000000, |
| 96 | .symbolrate_high = 45000000, |
| 97 | .VCAslope = 0x3f, |
| 98 | .VCAoffset = 0x3f, |
| 99 | .VGA1offset = 0x180, |
| 100 | .VGA2offset = 0x100, |
| 101 | .VGAprogdata = (2 << 18) | (0x100 << 9) | 0x180, |
| 102 | .VCAprogdata = (4 << 18) | (0x07 << 9) | 0x3f, |
| 103 | }, |
| 104 | }; |
| 105 | |
| 106 | /* |
| 107 | * Various tuner defaults need to be established for a given frequency kHz. |
| 108 | * fixme: The bounds on the bands do not match the doc in real life. |
| 109 | * fixme: Some of them have been moved, other might need adjustment. |
| 110 | */ |
| 111 | static struct |
| 112 | { |
| 113 | u32 freq_low; |
| 114 | u32 freq_high; |
| 115 | u32 bandselect; |
| 116 | u32 VCOdivider; |
| 117 | u32 VCOnumber; |
| 118 | u32 progdata; |
| 119 | } cx24123_bandselect_vals[] = |
| 120 | { |
| 121 | { |
| 122 | .freq_low = 950000, |
| 123 | .freq_high = 1018999, |
| 124 | .bandselect = 0x40, |
| 125 | .VCOdivider = 4, |
| 126 | .VCOnumber = 7, |
| 127 | .progdata = (0 << 18) | (0 << 9) | 0x40, |
| 128 | }, |
| 129 | { |
| 130 | .freq_low = 1019000, |
| 131 | .freq_high = 1074999, |
| 132 | .bandselect = 0x80, |
| 133 | .VCOdivider = 4, |
| 134 | .VCOnumber = 8, |
| 135 | .progdata = (0 << 18) | (0 << 9) | 0x80, |
| 136 | }, |
| 137 | { |
| 138 | .freq_low = 1075000, |
| 139 | .freq_high = 1227999, |
| 140 | .bandselect = 0x01, |
| 141 | .VCOdivider = 2, |
| 142 | .VCOnumber = 1, |
| 143 | .progdata = (0 << 18) | (1 << 9) | 0x01, |
| 144 | }, |
| 145 | { |
| 146 | .freq_low = 1228000, |
| 147 | .freq_high = 1349999, |
| 148 | .bandselect = 0x02, |
| 149 | .VCOdivider = 2, |
| 150 | .VCOnumber = 2, |
| 151 | .progdata = (0 << 18) | (1 << 9) | 0x02, |
| 152 | }, |
| 153 | { |
| 154 | .freq_low = 1350000, |
| 155 | .freq_high = 1481999, |
| 156 | .bandselect = 0x04, |
| 157 | .VCOdivider = 2, |
| 158 | .VCOnumber = 3, |
| 159 | .progdata = (0 << 18) | (1 << 9) | 0x04, |
| 160 | }, |
| 161 | { |
| 162 | .freq_low = 1482000, |
| 163 | .freq_high = 1595999, |
| 164 | .bandselect = 0x08, |
| 165 | .VCOdivider = 2, |
| 166 | .VCOnumber = 4, |
| 167 | .progdata = (0 << 18) | (1 << 9) | 0x08, |
| 168 | }, |
| 169 | { |
| 170 | .freq_low = 1596000, |
| 171 | .freq_high = 1717999, |
| 172 | .bandselect = 0x10, |
| 173 | .VCOdivider = 2, |
| 174 | .VCOnumber = 5, |
| 175 | .progdata = (0 << 18) | (1 << 9) | 0x10, |
| 176 | }, |
| 177 | { |
| 178 | .freq_low = 1718000, |
| 179 | .freq_high = 1855999, |
| 180 | .bandselect = 0x20, |
| 181 | .VCOdivider = 2, |
| 182 | .VCOnumber = 6, |
| 183 | .progdata = (0 << 18) | (1 << 9) | 0x20, |
| 184 | }, |
| 185 | { |
| 186 | .freq_low = 1856000, |
| 187 | .freq_high = 2035999, |
| 188 | .bandselect = 0x40, |
| 189 | .VCOdivider = 2, |
| 190 | .VCOnumber = 7, |
| 191 | .progdata = (0 << 18) | (1 << 9) | 0x40, |
| 192 | }, |
| 193 | { |
| 194 | .freq_low = 2036000, |
| 195 | .freq_high = 2149999, |
| 196 | .bandselect = 0x80, |
| 197 | .VCOdivider = 2, |
| 198 | .VCOnumber = 8, |
| 199 | .progdata = (0 << 18) | (1 << 9) | 0x80, |
| 200 | }, |
| 201 | }; |
| 202 | |
Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 203 | static struct { |
| 204 | u8 reg; |
| 205 | u8 data; |
| 206 | } cx24123_regdata[] = |
| 207 | { |
| 208 | {0x00, 0x03}, /* Reset system */ |
| 209 | {0x00, 0x00}, /* Clear reset */ |
| 210 | {0x01, 0x3b}, /* Apply sensible defaults, from an i2c sniffer */ |
| 211 | {0x03, 0x07}, |
| 212 | {0x04, 0x10}, |
| 213 | {0x05, 0x04}, |
| 214 | {0x06, 0x31}, |
| 215 | {0x0d, 0x02}, |
| 216 | {0x0e, 0x03}, |
| 217 | {0x0f, 0xfe}, |
| 218 | {0x10, 0x01}, |
| 219 | {0x14, 0x01}, |
| 220 | {0x15, 0x98}, |
| 221 | {0x16, 0x00}, |
| 222 | {0x17, 0x01}, |
| 223 | {0x1b, 0x05}, |
| 224 | {0x1c, 0x80}, |
| 225 | {0x1d, 0x00}, |
| 226 | {0x1e, 0x00}, |
| 227 | {0x20, 0x41}, |
| 228 | {0x21, 0x15}, |
| 229 | {0x27, 0x14}, |
| 230 | {0x28, 0x46}, |
| 231 | {0x29, 0x00}, |
| 232 | {0x2a, 0xb0}, |
| 233 | {0x2b, 0x73}, |
| 234 | {0x2c, 0x00}, |
| 235 | {0x2d, 0x00}, |
| 236 | {0x2e, 0x00}, |
| 237 | {0x2f, 0x00}, |
| 238 | {0x30, 0x00}, |
| 239 | {0x31, 0x00}, |
| 240 | {0x32, 0x8c}, |
| 241 | {0x33, 0x00}, |
| 242 | {0x34, 0x00}, |
| 243 | {0x35, 0x03}, |
| 244 | {0x36, 0x02}, |
| 245 | {0x37, 0x3a}, |
| 246 | {0x3a, 0x00}, /* Enable AGC accumulator */ |
| 247 | {0x44, 0x00}, |
| 248 | {0x45, 0x00}, |
| 249 | {0x46, 0x05}, |
| 250 | {0x56, 0x41}, |
| 251 | {0x57, 0xff}, |
| 252 | {0x67, 0x83}, |
| 253 | }; |
| 254 | |
| 255 | static int cx24123_writereg(struct cx24123_state* state, int reg, int data) |
| 256 | { |
| 257 | u8 buf[] = { reg, data }; |
| 258 | struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 }; |
| 259 | int err; |
| 260 | |
| 261 | if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) { |
| 262 | printk("%s: writereg error(err == %i, reg == 0x%02x," |
| 263 | " data == 0x%02x)\n", __FUNCTION__, err, reg, data); |
| 264 | return -EREMOTEIO; |
| 265 | } |
| 266 | |
| 267 | return 0; |
| 268 | } |
| 269 | |
| 270 | static int cx24123_writelnbreg(struct cx24123_state* state, int reg, int data) |
| 271 | { |
| 272 | u8 buf[] = { reg, data }; |
| 273 | /* fixme: put the intersil addr int the config */ |
| 274 | struct i2c_msg msg = { .addr = 0x08, .flags = 0, .buf = buf, .len = 2 }; |
| 275 | int err; |
| 276 | |
| 277 | if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) { |
| 278 | printk("%s: writelnbreg error (err == %i, reg == 0x%02x," |
| 279 | " data == 0x%02x)\n", __FUNCTION__, err, reg, data); |
| 280 | return -EREMOTEIO; |
| 281 | } |
| 282 | |
| 283 | /* cache the write, no way to read back */ |
| 284 | state->lnbreg = data; |
| 285 | |
| 286 | return 0; |
| 287 | } |
| 288 | |
| 289 | static int cx24123_readreg(struct cx24123_state* state, u8 reg) |
| 290 | { |
| 291 | int ret; |
| 292 | u8 b0[] = { reg }; |
| 293 | u8 b1[] = { 0 }; |
| 294 | struct i2c_msg msg[] = { |
| 295 | { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 }, |
| 296 | { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } |
| 297 | }; |
| 298 | |
| 299 | ret = i2c_transfer(state->i2c, msg, 2); |
| 300 | |
| 301 | if (ret != 2) { |
| 302 | printk("%s: reg=0x%x (error=%d)\n", __FUNCTION__, reg, ret); |
| 303 | return ret; |
| 304 | } |
| 305 | |
| 306 | return b1[0]; |
| 307 | } |
| 308 | |
| 309 | static int cx24123_readlnbreg(struct cx24123_state* state, u8 reg) |
| 310 | { |
| 311 | return state->lnbreg; |
| 312 | } |
| 313 | |
| 314 | static int cx24123_set_inversion(struct cx24123_state* state, fe_spectral_inversion_t inversion) |
| 315 | { |
| 316 | switch (inversion) { |
| 317 | case INVERSION_OFF: |
| 318 | cx24123_writereg(state, 0x0e, cx24123_readreg(state, 0x0e) & 0x7f); |
| 319 | cx24123_writereg(state, 0x10, cx24123_readreg(state, 0x10) | 0x80); |
| 320 | break; |
| 321 | case INVERSION_ON: |
| 322 | cx24123_writereg(state, 0x0e, cx24123_readreg(state, 0x0e) | 0x80); |
| 323 | cx24123_writereg(state, 0x10, cx24123_readreg(state, 0x10) | 0x80); |
| 324 | break; |
| 325 | case INVERSION_AUTO: |
| 326 | cx24123_writereg(state, 0x10, cx24123_readreg(state, 0x10) & 0x7f); |
| 327 | break; |
| 328 | default: |
| 329 | return -EINVAL; |
| 330 | } |
| 331 | |
| 332 | return 0; |
| 333 | } |
| 334 | |
| 335 | static int cx24123_get_inversion(struct cx24123_state* state, fe_spectral_inversion_t *inversion) |
| 336 | { |
| 337 | u8 val; |
| 338 | |
| 339 | val = cx24123_readreg(state, 0x1b) >> 7; |
| 340 | |
| 341 | if (val == 0) |
Johannes Stezenbach | e3b152b | 2006-01-09 15:25:08 -0200 | [diff] [blame] | 342 | *inversion = INVERSION_OFF; |
Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 343 | else |
Johannes Stezenbach | e3b152b | 2006-01-09 15:25:08 -0200 | [diff] [blame] | 344 | *inversion = INVERSION_ON; |
Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 345 | |
| 346 | return 0; |
| 347 | } |
| 348 | |
| 349 | static int cx24123_set_fec(struct cx24123_state* state, fe_code_rate_t fec) |
| 350 | { |
| 351 | if ( (fec < FEC_NONE) || (fec > FEC_AUTO) ) |
Johannes Stezenbach | e3b152b | 2006-01-09 15:25:08 -0200 | [diff] [blame] | 352 | fec = FEC_AUTO; |
Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 353 | |
| 354 | /* Hardware has 5/11 and 3/5 but are never unused */ |
| 355 | switch (fec) { |
| 356 | case FEC_NONE: |
Johannes Stezenbach | e3b152b | 2006-01-09 15:25:08 -0200 | [diff] [blame] | 357 | return cx24123_writereg(state, 0x0f, 0x01); |
Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 358 | case FEC_1_2: |
| 359 | return cx24123_writereg(state, 0x0f, 0x02); |
| 360 | case FEC_2_3: |
| 361 | return cx24123_writereg(state, 0x0f, 0x04); |
| 362 | case FEC_3_4: |
| 363 | return cx24123_writereg(state, 0x0f, 0x08); |
| 364 | case FEC_5_6: |
| 365 | return cx24123_writereg(state, 0x0f, 0x20); |
| 366 | case FEC_7_8: |
| 367 | return cx24123_writereg(state, 0x0f, 0x80); |
| 368 | case FEC_AUTO: |
| 369 | return cx24123_writereg(state, 0x0f, 0xae); |
| 370 | default: |
| 371 | return -EOPNOTSUPP; |
| 372 | } |
| 373 | } |
| 374 | |
| 375 | static int cx24123_get_fec(struct cx24123_state* state, fe_code_rate_t *fec) |
| 376 | { |
Johannes Stezenbach | e3b152b | 2006-01-09 15:25:08 -0200 | [diff] [blame] | 377 | int ret; |
Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 378 | u8 val; |
| 379 | |
Johannes Stezenbach | e3b152b | 2006-01-09 15:25:08 -0200 | [diff] [blame] | 380 | ret = cx24123_readreg (state, 0x1b); |
| 381 | if (ret < 0) |
| 382 | return ret; |
| 383 | val = ret & 0x07; |
Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 384 | switch (val) { |
| 385 | case 1: |
Johannes Stezenbach | e3b152b | 2006-01-09 15:25:08 -0200 | [diff] [blame] | 386 | *fec = FEC_1_2; |
| 387 | break; |
Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 388 | case 3: |
Johannes Stezenbach | e3b152b | 2006-01-09 15:25:08 -0200 | [diff] [blame] | 389 | *fec = FEC_2_3; |
| 390 | break; |
Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 391 | case 4: |
Johannes Stezenbach | e3b152b | 2006-01-09 15:25:08 -0200 | [diff] [blame] | 392 | *fec = FEC_3_4; |
| 393 | break; |
Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 394 | case 5: |
Johannes Stezenbach | e3b152b | 2006-01-09 15:25:08 -0200 | [diff] [blame] | 395 | *fec = FEC_4_5; |
| 396 | break; |
Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 397 | case 6: |
Johannes Stezenbach | e3b152b | 2006-01-09 15:25:08 -0200 | [diff] [blame] | 398 | *fec = FEC_5_6; |
| 399 | break; |
Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 400 | case 7: |
Johannes Stezenbach | e3b152b | 2006-01-09 15:25:08 -0200 | [diff] [blame] | 401 | *fec = FEC_7_8; |
| 402 | break; |
| 403 | case 2: /* *fec = FEC_3_5; break; */ |
| 404 | case 0: /* *fec = FEC_5_11; break; */ |
| 405 | *fec = FEC_AUTO; |
| 406 | break; |
Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 407 | default: |
Johannes Stezenbach | e3b152b | 2006-01-09 15:25:08 -0200 | [diff] [blame] | 408 | *fec = FEC_NONE; // can't happen |
Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 409 | } |
| 410 | |
Johannes Stezenbach | e3b152b | 2006-01-09 15:25:08 -0200 | [diff] [blame] | 411 | return 0; |
Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 412 | } |
| 413 | |
| 414 | /* fixme: Symbol rates < 3MSps may not work because of precision loss */ |
| 415 | static int cx24123_set_symbolrate(struct cx24123_state* state, u32 srate) |
| 416 | { |
| 417 | u32 val; |
| 418 | |
Johannes Stezenbach | e3b152b | 2006-01-09 15:25:08 -0200 | [diff] [blame] | 419 | val = (srate / 1185) * 100; |
Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 420 | |
| 421 | /* Compensate for scaling up, by removing 17 symbols per 1Msps */ |
Johannes Stezenbach | e3b152b | 2006-01-09 15:25:08 -0200 | [diff] [blame] | 422 | val = val - (17 * (srate / 1000000)); |
Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 423 | |
Johannes Stezenbach | e3b152b | 2006-01-09 15:25:08 -0200 | [diff] [blame] | 424 | cx24123_writereg(state, 0x08, (val >> 16) & 0xff ); |
| 425 | cx24123_writereg(state, 0x09, (val >> 8) & 0xff ); |
| 426 | cx24123_writereg(state, 0x0a, (val ) & 0xff ); |
Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 427 | |
| 428 | return 0; |
| 429 | } |
| 430 | |
| 431 | /* |
| 432 | * Based on the required frequency and symbolrate, the tuner AGC has to be configured |
| 433 | * and the correct band selected. Calculate those values |
| 434 | */ |
| 435 | static int cx24123_pll_calculate(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) |
| 436 | { |
| 437 | struct cx24123_state *state = fe->demodulator_priv; |
Johannes Stezenbach | e3b152b | 2006-01-09 15:25:08 -0200 | [diff] [blame] | 438 | u32 ndiv = 0, adiv = 0, vco_div = 0; |
| 439 | int i = 0; |
Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 440 | |
| 441 | /* Defaults for low freq, low rate */ |
| 442 | state->VCAarg = cx24123_AGC_vals[0].VCAprogdata; |
| 443 | state->VGAarg = cx24123_AGC_vals[0].VGAprogdata; |
| 444 | state->bandselectarg = cx24123_bandselect_vals[0].progdata; |
| 445 | vco_div = cx24123_bandselect_vals[0].VCOdivider; |
| 446 | |
| 447 | /* For the given symbolerate, determine the VCA and VGA programming bits */ |
Johannes Stezenbach | e3b152b | 2006-01-09 15:25:08 -0200 | [diff] [blame] | 448 | for (i = 0; i < sizeof(cx24123_AGC_vals) / sizeof(cx24123_AGC_vals[0]); i++) |
Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 449 | { |
| 450 | if ((cx24123_AGC_vals[i].symbolrate_low <= p->u.qpsk.symbol_rate) && |
| 451 | (cx24123_AGC_vals[i].symbolrate_high >= p->u.qpsk.symbol_rate) ) { |
| 452 | state->VCAarg = cx24123_AGC_vals[i].VCAprogdata; |
| 453 | state->VGAarg = cx24123_AGC_vals[i].VGAprogdata; |
| 454 | } |
| 455 | } |
| 456 | |
| 457 | /* For the given frequency, determine the bandselect programming bits */ |
Johannes Stezenbach | e3b152b | 2006-01-09 15:25:08 -0200 | [diff] [blame] | 458 | for (i = 0; i < sizeof(cx24123_bandselect_vals) / sizeof(cx24123_bandselect_vals[0]); i++) |
Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 459 | { |
| 460 | if ((cx24123_bandselect_vals[i].freq_low <= p->frequency) && |
| 461 | (cx24123_bandselect_vals[i].freq_high >= p->frequency) ) { |
| 462 | state->bandselectarg = cx24123_bandselect_vals[i].progdata; |
| 463 | vco_div = cx24123_bandselect_vals[i].VCOdivider; |
| 464 | } |
| 465 | } |
| 466 | |
| 467 | /* Determine the N/A dividers for the requested lband freq (in kHz). */ |
| 468 | /* Note: 10111 (kHz) is the Crystal Freq and divider of 10. */ |
| 469 | ndiv = ( ((p->frequency * vco_div) / (10111 / 10) / 2) / 32) & 0x1ff; |
| 470 | adiv = ( ((p->frequency * vco_div) / (10111 / 10) / 2) % 32) & 0x1f; |
| 471 | |
| 472 | if (adiv == 0) |
| 473 | adiv++; |
| 474 | |
| 475 | /* determine the correct pll frequency values. */ |
| 476 | /* Command 11, refdiv 11, cpump polarity 1, cpump current 3mA 10. */ |
| 477 | state->pllarg = (3 << 19) | (3 << 17) | (1 << 16) | (2 << 14); |
| 478 | state->pllarg |= (ndiv << 5) | adiv; |
| 479 | |
| 480 | return 0; |
| 481 | } |
| 482 | |
| 483 | /* |
| 484 | * Tuner data is 21 bits long, must be left-aligned in data. |
| 485 | * Tuner cx24109 is written through a dedicated 3wire interface on the demod chip. |
| 486 | */ |
| 487 | static int cx24123_pll_writereg(struct dvb_frontend* fe, struct dvb_frontend_parameters *p, u32 data) |
| 488 | { |
| 489 | struct cx24123_state *state = fe->demodulator_priv; |
Steven Toth | 0144f314 | 2006-01-09 15:25:22 -0200 | [diff] [blame] | 490 | unsigned long timeout; |
Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 491 | |
| 492 | /* align the 21 bytes into to bit23 boundary */ |
| 493 | data = data << 3; |
| 494 | |
| 495 | /* Reset the demod pll word length to 0x15 bits */ |
| 496 | cx24123_writereg(state, 0x21, 0x15); |
| 497 | |
Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 498 | /* write the msb 8 bits, wait for the send to be completed */ |
Steven Toth | 0144f314 | 2006-01-09 15:25:22 -0200 | [diff] [blame] | 499 | timeout = jiffies + msecs_to_jiffies(40); |
Johannes Stezenbach | e3b152b | 2006-01-09 15:25:08 -0200 | [diff] [blame] | 500 | cx24123_writereg(state, 0x22, (data >> 16) & 0xff); |
Steven Toth | 0144f314 | 2006-01-09 15:25:22 -0200 | [diff] [blame] | 501 | while ((cx24123_readreg(state, 0x20) & 0x40) == 0) { |
| 502 | if (time_after(jiffies, timeout)) { |
| 503 | printk("%s: demodulator is not responding, possibly hung, aborting.\n", __FUNCTION__); |
Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 504 | return -EREMOTEIO; |
| 505 | } |
Steven Toth | 0144f314 | 2006-01-09 15:25:22 -0200 | [diff] [blame] | 506 | msleep(10); |
Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 507 | } |
| 508 | |
Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 509 | /* send another 8 bytes, wait for the send to be completed */ |
Steven Toth | 0144f314 | 2006-01-09 15:25:22 -0200 | [diff] [blame] | 510 | timeout = jiffies + msecs_to_jiffies(40); |
Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 511 | cx24123_writereg(state, 0x22, (data>>8) & 0xff ); |
Steven Toth | 0144f314 | 2006-01-09 15:25:22 -0200 | [diff] [blame] | 512 | while ((cx24123_readreg(state, 0x20) & 0x40) == 0) { |
| 513 | if (time_after(jiffies, timeout)) { |
| 514 | printk("%s: demodulator is not responding, possibly hung, aborting.\n", __FUNCTION__); |
Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 515 | return -EREMOTEIO; |
| 516 | } |
Steven Toth | 0144f314 | 2006-01-09 15:25:22 -0200 | [diff] [blame] | 517 | msleep(10); |
Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 518 | } |
| 519 | |
Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 520 | /* send the lower 5 bits of this byte, padded with 3 LBB, wait for the send to be completed */ |
Steven Toth | 0144f314 | 2006-01-09 15:25:22 -0200 | [diff] [blame] | 521 | timeout = jiffies + msecs_to_jiffies(40); |
Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 522 | cx24123_writereg(state, 0x22, (data) & 0xff ); |
Steven Toth | 0144f314 | 2006-01-09 15:25:22 -0200 | [diff] [blame] | 523 | while ((cx24123_readreg(state, 0x20) & 0x80)) { |
| 524 | if (time_after(jiffies, timeout)) { |
| 525 | printk("%s: demodulator is not responding, possibly hung, aborting.\n", __FUNCTION__); |
Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 526 | return -EREMOTEIO; |
| 527 | } |
Steven Toth | 0144f314 | 2006-01-09 15:25:22 -0200 | [diff] [blame] | 528 | msleep(10); |
Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 529 | } |
| 530 | |
| 531 | /* Trigger the demod to configure the tuner */ |
| 532 | cx24123_writereg(state, 0x20, cx24123_readreg(state, 0x20) | 2); |
| 533 | cx24123_writereg(state, 0x20, cx24123_readreg(state, 0x20) & 0xfd); |
| 534 | |
| 535 | return 0; |
| 536 | } |
| 537 | |
| 538 | static int cx24123_pll_tune(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) |
| 539 | { |
| 540 | struct cx24123_state *state = fe->demodulator_priv; |
| 541 | |
Johannes Stezenbach | e3b152b | 2006-01-09 15:25:08 -0200 | [diff] [blame] | 542 | if (cx24123_pll_calculate(fe, p) != 0) { |
Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 543 | printk("%s: cx24123_pll_calcutate failed\n",__FUNCTION__); |
| 544 | return -EINVAL; |
| 545 | } |
| 546 | |
| 547 | /* Write the new VCO/VGA */ |
| 548 | cx24123_pll_writereg(fe, p, state->VCAarg); |
| 549 | cx24123_pll_writereg(fe, p, state->VGAarg); |
| 550 | |
| 551 | /* Write the new bandselect and pll args */ |
| 552 | cx24123_pll_writereg(fe, p, state->bandselectarg); |
| 553 | cx24123_pll_writereg(fe, p, state->pllarg); |
| 554 | |
| 555 | return 0; |
| 556 | } |
| 557 | |
| 558 | static int cx24123_initfe(struct dvb_frontend* fe) |
| 559 | { |
| 560 | struct cx24123_state *state = fe->demodulator_priv; |
| 561 | int i; |
| 562 | |
| 563 | /* Configure the demod to a good set of defaults */ |
Johannes Stezenbach | e3b152b | 2006-01-09 15:25:08 -0200 | [diff] [blame] | 564 | for (i = 0; i < sizeof(cx24123_regdata) / sizeof(cx24123_regdata[0]); i++) |
Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 565 | cx24123_writereg(state, cx24123_regdata[i].reg, cx24123_regdata[i].data); |
| 566 | |
| 567 | if (state->config->pll_init) |
| 568 | state->config->pll_init(fe); |
| 569 | |
| 570 | /* Configure the LNB for 14V */ |
Vadim Catana | 1c956a3 | 2006-01-09 15:25:08 -0200 | [diff] [blame] | 571 | if (state->config->use_isl6421) |
| 572 | cx24123_writelnbreg(state, 0x0, 0x2a); |
Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 573 | |
| 574 | return 0; |
| 575 | } |
| 576 | |
| 577 | static int cx24123_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage) |
| 578 | { |
| 579 | struct cx24123_state *state = fe->demodulator_priv; |
| 580 | u8 val; |
| 581 | |
Vadim Catana | 1c956a3 | 2006-01-09 15:25:08 -0200 | [diff] [blame] | 582 | switch (state->config->use_isl6421) { |
Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 583 | |
Vadim Catana | 1c956a3 | 2006-01-09 15:25:08 -0200 | [diff] [blame] | 584 | case 1: |
| 585 | |
| 586 | val = cx24123_readlnbreg(state, 0x0); |
| 587 | |
| 588 | switch (voltage) { |
| 589 | case SEC_VOLTAGE_13: |
| 590 | return cx24123_writelnbreg(state, 0x0, val & 0x32); /* V 13v */ |
| 591 | case SEC_VOLTAGE_18: |
| 592 | return cx24123_writelnbreg(state, 0x0, val | 0x04); /* H 18v */ |
| 593 | case SEC_VOLTAGE_OFF: |
| 594 | return cx24123_writelnbreg(state, 0x0, val & 0x30); |
| 595 | default: |
| 596 | return -EINVAL; |
| 597 | }; |
| 598 | |
| 599 | case 0: |
| 600 | |
| 601 | val = cx24123_readreg(state, 0x29); |
| 602 | |
| 603 | switch (voltage) { |
| 604 | case SEC_VOLTAGE_13: |
| 605 | dprintk("%s: setting voltage 13V\n", __FUNCTION__); |
| 606 | if (state->config->enable_lnb_voltage) |
| 607 | state->config->enable_lnb_voltage(fe, 1); |
| 608 | return cx24123_writereg(state, 0x29, val | 0x80); |
| 609 | case SEC_VOLTAGE_18: |
| 610 | dprintk("%s: setting voltage 18V\n", __FUNCTION__); |
| 611 | if (state->config->enable_lnb_voltage) |
| 612 | state->config->enable_lnb_voltage(fe, 1); |
| 613 | return cx24123_writereg(state, 0x29, val & 0x7f); |
| 614 | case SEC_VOLTAGE_OFF: |
| 615 | dprintk("%s: setting voltage off\n", __FUNCTION__); |
| 616 | if (state->config->enable_lnb_voltage) |
| 617 | state->config->enable_lnb_voltage(fe, 0); |
| 618 | return 0; |
| 619 | default: |
| 620 | return -EINVAL; |
| 621 | }; |
| 622 | } |
| 623 | |
| 624 | return 0; |
Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 625 | } |
| 626 | |
| 627 | static int cx24123_send_diseqc_msg(struct dvb_frontend* fe, |
Johannes Stezenbach | e3b152b | 2006-01-09 15:25:08 -0200 | [diff] [blame] | 628 | struct dvb_diseqc_master_cmd *cmd) |
Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 629 | { |
| 630 | /* fixme: Implement diseqc */ |
| 631 | printk("%s: No support yet\n",__FUNCTION__); |
| 632 | |
| 633 | return -ENOTSUPP; |
| 634 | } |
| 635 | |
| 636 | static int cx24123_read_status(struct dvb_frontend* fe, fe_status_t* status) |
| 637 | { |
| 638 | struct cx24123_state *state = fe->demodulator_priv; |
| 639 | |
| 640 | int sync = cx24123_readreg(state, 0x14); |
| 641 | int lock = cx24123_readreg(state, 0x20); |
| 642 | |
| 643 | *status = 0; |
| 644 | if (lock & 0x01) |
| 645 | *status |= FE_HAS_CARRIER | FE_HAS_SIGNAL; |
| 646 | if (sync & 0x04) |
| 647 | *status |= FE_HAS_VITERBI; |
| 648 | if (sync & 0x08) |
| 649 | *status |= FE_HAS_CARRIER; |
| 650 | if (sync & 0x80) |
| 651 | *status |= FE_HAS_SYNC | FE_HAS_LOCK; |
| 652 | |
| 653 | return 0; |
| 654 | } |
| 655 | |
| 656 | /* |
| 657 | * Configured to return the measurement of errors in blocks, because no UCBLOCKS value |
| 658 | * is available, so this value doubles up to satisfy both measurements |
| 659 | */ |
| 660 | static int cx24123_read_ber(struct dvb_frontend* fe, u32* ber) |
| 661 | { |
| 662 | struct cx24123_state *state = fe->demodulator_priv; |
| 663 | |
| 664 | state->lastber = |
| 665 | ((cx24123_readreg(state, 0x1c) & 0x3f) << 16) | |
| 666 | (cx24123_readreg(state, 0x1d) << 8 | |
| 667 | cx24123_readreg(state, 0x1e)); |
| 668 | |
| 669 | /* Do the signal quality processing here, it's derived from the BER. */ |
| 670 | /* Scale the BER from a 24bit to a SNR 16 bit where higher = better */ |
| 671 | if (state->lastber < 5000) |
| 672 | state->snr = 655*100; |
| 673 | else if ( (state->lastber >= 5000) && (state->lastber < 55000) ) |
| 674 | state->snr = 655*90; |
| 675 | else if ( (state->lastber >= 55000) && (state->lastber < 150000) ) |
| 676 | state->snr = 655*80; |
| 677 | else if ( (state->lastber >= 150000) && (state->lastber < 250000) ) |
| 678 | state->snr = 655*70; |
| 679 | else if ( (state->lastber >= 250000) && (state->lastber < 450000) ) |
| 680 | state->snr = 655*65; |
| 681 | else |
| 682 | state->snr = 0; |
| 683 | |
| 684 | *ber = state->lastber; |
| 685 | |
| 686 | return 0; |
| 687 | } |
| 688 | |
| 689 | static int cx24123_read_signal_strength(struct dvb_frontend* fe, u16* signal_strength) |
| 690 | { |
| 691 | struct cx24123_state *state = fe->demodulator_priv; |
| 692 | *signal_strength = cx24123_readreg(state, 0x3b) << 8; /* larger = better */ |
| 693 | |
| 694 | return 0; |
| 695 | } |
| 696 | |
| 697 | static int cx24123_read_snr(struct dvb_frontend* fe, u16* snr) |
| 698 | { |
| 699 | struct cx24123_state *state = fe->demodulator_priv; |
| 700 | *snr = state->snr; |
| 701 | |
| 702 | return 0; |
| 703 | } |
| 704 | |
| 705 | static int cx24123_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) |
| 706 | { |
| 707 | struct cx24123_state *state = fe->demodulator_priv; |
| 708 | *ucblocks = state->lastber; |
| 709 | |
| 710 | return 0; |
| 711 | } |
| 712 | |
| 713 | static int cx24123_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) |
| 714 | { |
| 715 | struct cx24123_state *state = fe->demodulator_priv; |
| 716 | |
| 717 | if (state->config->set_ts_params) |
| 718 | state->config->set_ts_params(fe, 0); |
| 719 | |
| 720 | state->currentfreq=p->frequency; |
Johannes Stezenbach | e3b152b | 2006-01-09 15:25:08 -0200 | [diff] [blame] | 721 | state->currentsymbolrate = p->u.qpsk.symbol_rate; |
Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 722 | |
| 723 | cx24123_set_inversion(state, p->inversion); |
| 724 | cx24123_set_fec(state, p->u.qpsk.fec_inner); |
| 725 | cx24123_set_symbolrate(state, p->u.qpsk.symbol_rate); |
| 726 | cx24123_pll_tune(fe, p); |
| 727 | |
| 728 | /* Enable automatic aquisition and reset cycle */ |
Johannes Stezenbach | e3b152b | 2006-01-09 15:25:08 -0200 | [diff] [blame] | 729 | cx24123_writereg(state, 0x03, (cx24123_readreg(state, 0x03) | 0x07)); |
Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 730 | cx24123_writereg(state, 0x00, 0x10); |
| 731 | cx24123_writereg(state, 0x00, 0); |
| 732 | |
| 733 | return 0; |
| 734 | } |
| 735 | |
| 736 | static int cx24123_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) |
| 737 | { |
| 738 | struct cx24123_state *state = fe->demodulator_priv; |
| 739 | |
| 740 | if (cx24123_get_inversion(state, &p->inversion) != 0) { |
| 741 | printk("%s: Failed to get inversion status\n",__FUNCTION__); |
| 742 | return -EREMOTEIO; |
| 743 | } |
| 744 | if (cx24123_get_fec(state, &p->u.qpsk.fec_inner) != 0) { |
| 745 | printk("%s: Failed to get fec status\n",__FUNCTION__); |
| 746 | return -EREMOTEIO; |
| 747 | } |
| 748 | p->frequency = state->currentfreq; |
| 749 | p->u.qpsk.symbol_rate = state->currentsymbolrate; |
| 750 | |
| 751 | return 0; |
| 752 | } |
| 753 | |
| 754 | static int cx24123_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) |
| 755 | { |
| 756 | struct cx24123_state *state = fe->demodulator_priv; |
| 757 | u8 val; |
| 758 | |
Vadim Catana | 1c956a3 | 2006-01-09 15:25:08 -0200 | [diff] [blame] | 759 | switch (state->config->use_isl6421) { |
| 760 | case 1: |
Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 761 | |
Vadim Catana | 1c956a3 | 2006-01-09 15:25:08 -0200 | [diff] [blame] | 762 | val = cx24123_readlnbreg(state, 0x0); |
| 763 | |
| 764 | switch (tone) { |
| 765 | case SEC_TONE_ON: |
| 766 | return cx24123_writelnbreg(state, 0x0, val | 0x10); |
| 767 | case SEC_TONE_OFF: |
| 768 | return cx24123_writelnbreg(state, 0x0, val & 0x2f); |
| 769 | default: |
| 770 | printk("%s: CASE reached default with tone=%d\n", __FUNCTION__, tone); |
| 771 | return -EINVAL; |
| 772 | } |
| 773 | |
| 774 | case 0: |
| 775 | |
| 776 | val = cx24123_readreg(state, 0x29); |
| 777 | |
| 778 | switch (tone) { |
| 779 | case SEC_TONE_ON: |
| 780 | dprintk("%s: setting tone on\n", __FUNCTION__); |
| 781 | return cx24123_writereg(state, 0x29, val | 0x10); |
| 782 | case SEC_TONE_OFF: |
| 783 | dprintk("%s: setting tone off\n",__FUNCTION__); |
| 784 | return cx24123_writereg(state, 0x29, val & 0xef); |
| 785 | default: |
| 786 | printk("%s: CASE reached default with tone=%d\n", __FUNCTION__, tone); |
| 787 | return -EINVAL; |
| 788 | } |
Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 789 | } |
Vadim Catana | 1c956a3 | 2006-01-09 15:25:08 -0200 | [diff] [blame] | 790 | |
| 791 | return 0; |
Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 792 | } |
| 793 | |
| 794 | static void cx24123_release(struct dvb_frontend* fe) |
| 795 | { |
| 796 | struct cx24123_state* state = fe->demodulator_priv; |
| 797 | dprintk("%s\n",__FUNCTION__); |
| 798 | kfree(state); |
| 799 | } |
| 800 | |
| 801 | static struct dvb_frontend_ops cx24123_ops; |
| 802 | |
Johannes Stezenbach | e3b152b | 2006-01-09 15:25:08 -0200 | [diff] [blame] | 803 | struct dvb_frontend* cx24123_attach(const struct cx24123_config* config, |
| 804 | struct i2c_adapter* i2c) |
Steve Toth | b79cb65 | 2006-01-09 15:25:07 -0200 | [diff] [blame] | 805 | { |
| 806 | struct cx24123_state* state = NULL; |
| 807 | int ret; |
| 808 | |
| 809 | dprintk("%s\n",__FUNCTION__); |
| 810 | |
| 811 | /* allocate memory for the internal state */ |
| 812 | state = kmalloc(sizeof(struct cx24123_state), GFP_KERNEL); |
| 813 | if (state == NULL) { |
| 814 | printk("Unable to kmalloc\n"); |
| 815 | goto error; |
| 816 | } |
| 817 | |
| 818 | /* setup the state */ |
| 819 | state->config = config; |
| 820 | state->i2c = i2c; |
| 821 | memcpy(&state->ops, &cx24123_ops, sizeof(struct dvb_frontend_ops)); |
| 822 | state->lastber = 0; |
| 823 | state->snr = 0; |
| 824 | state->lnbreg = 0; |
| 825 | state->VCAarg = 0; |
| 826 | state->VGAarg = 0; |
| 827 | state->bandselectarg = 0; |
| 828 | state->pllarg = 0; |
| 829 | state->currentfreq = 0; |
| 830 | state->currentsymbolrate = 0; |
| 831 | |
| 832 | /* check if the demod is there */ |
| 833 | ret = cx24123_readreg(state, 0x00); |
| 834 | if ((ret != 0xd1) && (ret != 0xe1)) { |
| 835 | printk("Version != d1 or e1\n"); |
| 836 | goto error; |
| 837 | } |
| 838 | |
| 839 | /* create dvb_frontend */ |
| 840 | state->frontend.ops = &state->ops; |
| 841 | state->frontend.demodulator_priv = state; |
| 842 | return &state->frontend; |
| 843 | |
| 844 | error: |
| 845 | kfree(state); |
| 846 | |
| 847 | return NULL; |
| 848 | } |
| 849 | |
| 850 | static struct dvb_frontend_ops cx24123_ops = { |
| 851 | |
| 852 | .info = { |
| 853 | .name = "Conexant CX24123/CX24109", |
| 854 | .type = FE_QPSK, |
| 855 | .frequency_min = 950000, |
| 856 | .frequency_max = 2150000, |
| 857 | .frequency_stepsize = 1011, /* kHz for QPSK frontends */ |
| 858 | .frequency_tolerance = 29500, |
| 859 | .symbol_rate_min = 1000000, |
| 860 | .symbol_rate_max = 45000000, |
| 861 | .caps = FE_CAN_INVERSION_AUTO | |
| 862 | FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | |
| 863 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | |
| 864 | FE_CAN_QPSK | FE_CAN_RECOVER |
| 865 | }, |
| 866 | |
| 867 | .release = cx24123_release, |
| 868 | |
| 869 | .init = cx24123_initfe, |
| 870 | .set_frontend = cx24123_set_frontend, |
| 871 | .get_frontend = cx24123_get_frontend, |
| 872 | .read_status = cx24123_read_status, |
| 873 | .read_ber = cx24123_read_ber, |
| 874 | .read_signal_strength = cx24123_read_signal_strength, |
| 875 | .read_snr = cx24123_read_snr, |
| 876 | .read_ucblocks = cx24123_read_ucblocks, |
| 877 | .diseqc_send_master_cmd = cx24123_send_diseqc_msg, |
| 878 | .set_tone = cx24123_set_tone, |
| 879 | .set_voltage = cx24123_set_voltage, |
| 880 | }; |
| 881 | |
| 882 | module_param(debug, int, 0644); |
| 883 | MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); |
| 884 | |
| 885 | MODULE_DESCRIPTION("DVB Frontend module for Conexant cx24123/cx24109 hardware"); |
| 886 | MODULE_AUTHOR("Steven Toth"); |
| 887 | MODULE_LICENSE("GPL"); |
| 888 | |
| 889 | EXPORT_SYMBOL(cx24123_attach); |