blob: 6ace0e914fd1f2705a00609d23df8e07f44941dd [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#define RCS_ID "$Id: scc.c,v 1.75 1998/11/04 15:15:01 jreuter Exp jreuter $"
2
3#define VERSION "3.0"
4
5/*
6 * Please use z8530drv-utils-3.0 with this version.
7 * ------------------
8 *
9 * You can find a subset of the documentation in
10 * Documentation/networking/z8530drv.txt.
11 */
12
13/*
14 ********************************************************************
15 * SCC.C - Linux driver for Z8530 based HDLC cards for AX.25 *
16 ********************************************************************
17
18
19 ********************************************************************
20
21 Copyright (c) 1993, 2000 Joerg Reuter DL1BKE
22
23 portions (c) 1993 Guido ten Dolle PE1NNZ
24
25 ********************************************************************
26
27 The driver and the programs in the archive are UNDER CONSTRUCTION.
28 The code is likely to fail, and so your kernel could --- even
29 a whole network.
30
31 This driver is intended for Amateur Radio use. If you are running it
32 for commercial purposes, please drop me a note. I am nosy...
33
34 ...BUT:
35
36 ! You m u s t recognize the appropriate legislations of your country !
37 ! before you connect a radio to the SCC board and start to transmit or !
38 ! receive. The GPL allows you to use the d r i v e r, NOT the RADIO! !
39
40 For non-Amateur-Radio use please note that you might need a special
41 allowance/licence from the designer of the SCC Board and/or the
42 MODEM.
43
44 This program is free software; you can redistribute it and/or modify
45 it under the terms of the (modified) GNU General Public License
46 delivered with the Linux kernel source.
47
48 This program is distributed in the hope that it will be useful,
49 but WITHOUT ANY WARRANTY; without even the implied warranty of
50 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
51 GNU General Public License for more details.
52
53 You should find a copy of the GNU General Public License in
54 /usr/src/linux/COPYING;
55
56 ********************************************************************
57
58
59 Incomplete history of z8530drv:
60 -------------------------------
61
62 1994-09-13 started to write the driver, rescued most of my own
63 code (and Hans Alblas' memory buffer pool concept) from
64 an earlier project "sccdrv" which was initiated by
65 Guido ten Dolle. Not much of the old driver survived,
66 though. The first version I put my hands on was sccdrv1.3
67 from August 1993. The memory buffer pool concept
68 appeared in an unauthorized sccdrv version (1.5) from
69 August 1994.
70
71 1995-01-31 changed copyright notice to GPL without limitations.
72
73 .
74 . <SNIP>
75 .
76
77 1996-10-05 New semester, new driver...
78
79 * KISS TNC emulator removed (TTY driver)
80 * Source moved to drivers/net/
81 * Includes Z8530 defines from drivers/net/z8530.h
82 * Uses sk_buffer memory management
83 * Reduced overhead of /proc/net/z8530drv output
84 * Streamlined quite a lot things
85 * Invents brand new bugs... ;-)
86
87 The move to version number 3.0 reflects theses changes.
88 You can use 'kissbridge' if you need a KISS TNC emulator.
89
90 1996-12-13 Fixed for Linux networking changes. (G4KLX)
91 1997-01-08 Fixed the remaining problems.
92 1997-04-02 Hopefully fixed the problems with the new *_timer()
93 routines, added calibration code.
94 1997-10-12 Made SCC_DELAY a CONFIG option, added CONFIG_SCC_TRXECHO
95 1998-01-29 Small fix to avoid lock-up on initialization
96 1998-09-29 Fixed the "grouping" bugs, tx_inhibit works again,
97 using dev->tx_queue_len now instead of MAXQUEUE now.
98 1998-10-21 Postponed the spinlock changes, would need a lot of
99 testing I currently don't have the time to. Softdcd doesn't
100 work.
101 1998-11-04 Softdcd does not work correctly in DPLL mode, in fact it
102 never did. The DPLL locks on noise, the SYNC unit sees
103 flags that aren't... Restarting the DPLL does not help
104 either, it resynchronizes too slow and the first received
105 frame gets lost.
106 2000-02-13 Fixed for new network driver interface changes, still
107 does TX timeouts itself since it uses its own queue
108 scheme.
109
110 Thanks to all who contributed to this driver with ideas and bug
111 reports!
112
113 NB -- if you find errors, change something, please let me know
114 first before you distribute it... And please don't touch
115 the version number. Just replace my callsign in
116 "v3.0.dl1bke" with your own. Just to avoid confusion...
117
118 If you want to add your modification to the linux distribution
119 please (!) contact me first.
120
121 New versions of the driver will be announced on the linux-hams
122 mailing list on vger.kernel.org. To subscribe send an e-mail
123 to majordomo@vger.kernel.org with the following line in
124 the body of the mail:
125
126 subscribe linux-hams
127
128 The content of the "Subject" field will be ignored.
129
130 vy 73,
131 Joerg Reuter ampr-net: dl1bke@db0pra.ampr.org
132 AX-25 : DL1BKE @ DB0ABH.#BAY.DEU.EU
133 Internet: jreuter@yaina.de
134 www : http://yaina.de/jreuter
135*/
136
137/* ----------------------------------------------------------------------- */
138
139#undef SCC_LDELAY /* slow it even a bit more down */
140#undef SCC_DONT_CHECK /* don't look if the SCCs you specified are available */
141
142#define SCC_MAXCHIPS 4 /* number of max. supported chips */
143#define SCC_BUFSIZE 384 /* must not exceed 4096 */
144#undef SCC_DEBUG
145
146#define SCC_DEFAULT_CLOCK 4915200
147 /* default pclock if nothing is specified */
148
149/* ----------------------------------------------------------------------- */
150
151#include <linux/config.h>
152#include <linux/module.h>
153#include <linux/errno.h>
154#include <linux/signal.h>
155#include <linux/timer.h>
156#include <linux/interrupt.h>
157#include <linux/ioport.h>
158#include <linux/string.h>
159#include <linux/in.h>
160#include <linux/fcntl.h>
161#include <linux/ptrace.h>
162#include <linux/slab.h>
163#include <linux/delay.h>
164#include <linux/skbuff.h>
165#include <linux/netdevice.h>
166#include <linux/rtnetlink.h>
167#include <linux/if_ether.h>
168#include <linux/if_arp.h>
169#include <linux/socket.h>
170#include <linux/init.h>
171#include <linux/scc.h>
172#include <linux/ctype.h>
173#include <linux/kernel.h>
174#include <linux/proc_fs.h>
175#include <linux/seq_file.h>
176#include <linux/bitops.h>
177
178#include <net/ax25.h>
179
180#include <asm/irq.h>
181#include <asm/system.h>
182#include <asm/io.h>
183#include <asm/uaccess.h>
184
185#include "z8530.h"
186
187static char banner[] __initdata = KERN_INFO "AX.25: Z8530 SCC driver version "VERSION".dl1bke\n";
188
189static void t_dwait(unsigned long);
190static void t_txdelay(unsigned long);
191static void t_tail(unsigned long);
192static void t_busy(unsigned long);
193static void t_maxkeyup(unsigned long);
194static void t_idle(unsigned long);
195static void scc_tx_done(struct scc_channel *);
196static void scc_start_tx_timer(struct scc_channel *, void (*)(unsigned long), unsigned long);
197static void scc_start_maxkeyup(struct scc_channel *);
198static void scc_start_defer(struct scc_channel *);
199
200static void z8530_init(void);
201
202static void init_channel(struct scc_channel *scc);
203static void scc_key_trx (struct scc_channel *scc, char tx);
204static irqreturn_t scc_isr(int irq, void *dev_id, struct pt_regs *regs);
205static void scc_init_timer(struct scc_channel *scc);
206
207static int scc_net_alloc(const char *name, struct scc_channel *scc);
208static void scc_net_setup(struct net_device *dev);
209static int scc_net_open(struct net_device *dev);
210static int scc_net_close(struct net_device *dev);
211static void scc_net_rx(struct scc_channel *scc, struct sk_buff *skb);
212static int scc_net_tx(struct sk_buff *skb, struct net_device *dev);
213static int scc_net_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
214static int scc_net_set_mac_address(struct net_device *dev, void *addr);
215static struct net_device_stats * scc_net_get_stats(struct net_device *dev);
216
217static unsigned char SCC_DriverName[] = "scc";
218
219static struct irqflags { unsigned char used : 1; } Ivec[NR_IRQS];
220
221static struct scc_channel SCC_Info[2 * SCC_MAXCHIPS]; /* information per channel */
222
223static struct scc_ctrl {
224 io_port chan_A;
225 io_port chan_B;
226 int irq;
227} SCC_ctrl[SCC_MAXCHIPS+1];
228
229static unsigned char Driver_Initialized;
230static int Nchips;
231static io_port Vector_Latch;
232
233
234/* ******************************************************************** */
235/* * Port Access Functions * */
236/* ******************************************************************** */
237
238/* These provide interrupt save 2-step access to the Z8530 registers */
239
240static DEFINE_SPINLOCK(iolock); /* Guards paired accesses */
241
242static inline unsigned char InReg(io_port port, unsigned char reg)
243{
244 unsigned long flags;
245 unsigned char r;
246
247 spin_lock_irqsave(&iolock, flags);
248#ifdef SCC_LDELAY
249 Outb(port, reg);
250 udelay(SCC_LDELAY);
251 r=Inb(port);
252 udelay(SCC_LDELAY);
253#else
254 Outb(port, reg);
255 r=Inb(port);
256#endif
257 spin_unlock_irqrestore(&iolock, flags);
258 return r;
259}
260
261static inline void OutReg(io_port port, unsigned char reg, unsigned char val)
262{
263 unsigned long flags;
264
265 spin_lock_irqsave(&iolock, flags);
266#ifdef SCC_LDELAY
267 Outb(port, reg); udelay(SCC_LDELAY);
268 Outb(port, val); udelay(SCC_LDELAY);
269#else
270 Outb(port, reg);
271 Outb(port, val);
272#endif
273 spin_unlock_irqrestore(&iolock, flags);
274}
275
276static inline void wr(struct scc_channel *scc, unsigned char reg,
277 unsigned char val)
278{
279 OutReg(scc->ctrl, reg, (scc->wreg[reg] = val));
280}
281
282static inline void or(struct scc_channel *scc, unsigned char reg, unsigned char val)
283{
284 OutReg(scc->ctrl, reg, (scc->wreg[reg] |= val));
285}
286
287static inline void cl(struct scc_channel *scc, unsigned char reg, unsigned char val)
288{
289 OutReg(scc->ctrl, reg, (scc->wreg[reg] &= ~val));
290}
291
292/* ******************************************************************** */
293/* * Some useful macros * */
294/* ******************************************************************** */
295
296static inline void scc_discard_buffers(struct scc_channel *scc)
297{
298 unsigned long flags;
299
300 spin_lock_irqsave(&scc->lock, flags);
301 if (scc->tx_buff != NULL)
302 {
303 dev_kfree_skb(scc->tx_buff);
304 scc->tx_buff = NULL;
305 }
306
David S. Millerb03efcf2005-07-08 14:57:23 -0700307 while (!skb_queue_empty(&scc->tx_queue))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700308 dev_kfree_skb(skb_dequeue(&scc->tx_queue));
309
310 spin_unlock_irqrestore(&scc->lock, flags);
311}
312
313
314
315/* ******************************************************************** */
316/* * Interrupt Service Routines * */
317/* ******************************************************************** */
318
319
320/* ----> subroutines for the interrupt handlers <---- */
321
322static inline void scc_notify(struct scc_channel *scc, int event)
323{
324 struct sk_buff *skb;
325 char *bp;
326
327 if (scc->kiss.fulldup != KISS_DUPLEX_OPTIMA)
328 return;
329
330 skb = dev_alloc_skb(2);
331 if (skb != NULL)
332 {
333 bp = skb_put(skb, 2);
334 *bp++ = PARAM_HWEVENT;
335 *bp++ = event;
336 scc_net_rx(scc, skb);
337 } else
338 scc->stat.nospace++;
339}
340
341static inline void flush_rx_FIFO(struct scc_channel *scc)
342{
343 int k;
344
345 for (k=0; k<3; k++)
346 Inb(scc->data);
347
348 if(scc->rx_buff != NULL) /* did we receive something? */
349 {
350 scc->stat.rxerrs++; /* then count it as an error */
351 dev_kfree_skb_irq(scc->rx_buff);
352 scc->rx_buff = NULL;
353 }
354}
355
356static void start_hunt(struct scc_channel *scc)
357{
358 if ((scc->modem.clocksrc != CLK_EXTERNAL))
359 OutReg(scc->ctrl,R14,SEARCH|scc->wreg[R14]); /* DPLL: enter search mode */
360 or(scc,R3,ENT_HM|RxENABLE); /* enable the receiver, hunt mode */
361}
362
363/* ----> four different interrupt handlers for Tx, Rx, changing of */
364/* DCD/CTS and Rx/Tx errors */
365
366/* Transmitter interrupt handler */
367static inline void scc_txint(struct scc_channel *scc)
368{
369 struct sk_buff *skb;
370
371 scc->stat.txints++;
372 skb = scc->tx_buff;
373
374 /* send first octet */
375
376 if (skb == NULL)
377 {
378 skb = skb_dequeue(&scc->tx_queue);
379 scc->tx_buff = skb;
380 netif_wake_queue(scc->dev);
381
382 if (skb == NULL)
383 {
384 scc_tx_done(scc);
385 Outb(scc->ctrl, RES_Tx_P);
386 return;
387 }
388
389 if (skb->len == 0) /* Paranoia... */
390 {
391 dev_kfree_skb_irq(skb);
392 scc->tx_buff = NULL;
393 scc_tx_done(scc);
394 Outb(scc->ctrl, RES_Tx_P);
395 return;
396 }
397
398 scc->stat.tx_state = TXS_ACTIVE;
399
400 OutReg(scc->ctrl, R0, RES_Tx_CRC);
401 /* reset CRC generator */
402 or(scc,R10,ABUNDER); /* re-install underrun protection */
403 Outb(scc->data,*skb->data); /* send byte */
404 skb_pull(skb, 1);
405
406 if (!scc->enhanced) /* reset EOM latch */
407 Outb(scc->ctrl,RES_EOM_L);
408 return;
409 }
410
411 /* End Of Frame... */
412
413 if (skb->len == 0)
414 {
415 Outb(scc->ctrl, RES_Tx_P); /* reset pending int */
416 cl(scc, R10, ABUNDER); /* send CRC */
417 dev_kfree_skb_irq(skb);
418 scc->tx_buff = NULL;
419 scc->stat.tx_state = TXS_NEWFRAME; /* next frame... */
420 return;
421 }
422
423 /* send octet */
424
425 Outb(scc->data,*skb->data);
426 skb_pull(skb, 1);
427}
428
429
430/* External/Status interrupt handler */
431static inline void scc_exint(struct scc_channel *scc)
432{
433 unsigned char status,changes,chg_and_stat;
434
435 scc->stat.exints++;
436
437 status = InReg(scc->ctrl,R0);
438 changes = status ^ scc->status;
439 chg_and_stat = changes & status;
440
441 /* ABORT: generated whenever DCD drops while receiving */
442
443 if (chg_and_stat & BRK_ABRT) /* Received an ABORT */
444 flush_rx_FIFO(scc);
445
446 /* HUNT: software DCD; on = waiting for SYNC, off = receiving frame */
447
448 if ((changes & SYNC_HUNT) && scc->kiss.softdcd)
449 {
450 if (status & SYNC_HUNT)
451 {
452 scc->dcd = 0;
453 flush_rx_FIFO(scc);
454 if ((scc->modem.clocksrc != CLK_EXTERNAL))
455 OutReg(scc->ctrl,R14,SEARCH|scc->wreg[R14]); /* DPLL: enter search mode */
456 } else {
457 scc->dcd = 1;
458 }
459
460 scc_notify(scc, scc->dcd? HWEV_DCD_OFF:HWEV_DCD_ON);
461 }
462
463 /* DCD: on = start to receive packet, off = ABORT condition */
464 /* (a successfully received packet generates a special condition int) */
465
466 if((changes & DCD) && !scc->kiss.softdcd) /* DCD input changed state */
467 {
468 if(status & DCD) /* DCD is now ON */
469 {
470 start_hunt(scc);
471 scc->dcd = 1;
472 } else { /* DCD is now OFF */
473 cl(scc,R3,ENT_HM|RxENABLE); /* disable the receiver */
474 flush_rx_FIFO(scc);
475 scc->dcd = 0;
476 }
477
478 scc_notify(scc, scc->dcd? HWEV_DCD_ON:HWEV_DCD_OFF);
479 }
480
481#ifdef notdef
482 /* CTS: use external TxDelay (what's that good for?!)
483 * Anyway: If we _could_ use it (BayCom USCC uses CTS for
484 * own purposes) we _should_ use the "autoenable" feature
485 * of the Z8530 and not this interrupt...
486 */
487
488 if (chg_and_stat & CTS) /* CTS is now ON */
489 {
490 if (scc->kiss.txdelay == 0) /* zero TXDELAY = wait for CTS */
491 scc_start_tx_timer(scc, t_txdelay, 0);
492 }
493#endif
494
495 if (scc->stat.tx_state == TXS_ACTIVE && (status & TxEOM))
496 {
497 scc->stat.tx_under++; /* oops, an underrun! count 'em */
498 Outb(scc->ctrl, RES_EXT_INT); /* reset ext/status interrupts */
499
500 if (scc->tx_buff != NULL)
501 {
502 dev_kfree_skb_irq(scc->tx_buff);
503 scc->tx_buff = NULL;
504 }
505
506 or(scc,R10,ABUNDER);
507 scc_start_tx_timer(scc, t_txdelay, 0); /* restart transmission */
508 }
509
510 scc->status = status;
511 Outb(scc->ctrl,RES_EXT_INT);
512}
513
514
515/* Receiver interrupt handler */
516static inline void scc_rxint(struct scc_channel *scc)
517{
518 struct sk_buff *skb;
519
520 scc->stat.rxints++;
521
522 if((scc->wreg[5] & RTS) && scc->kiss.fulldup == KISS_DUPLEX_HALF)
523 {
524 Inb(scc->data); /* discard char */
525 or(scc,R3,ENT_HM); /* enter hunt mode for next flag */
526 return;
527 }
528
529 skb = scc->rx_buff;
530
531 if (skb == NULL)
532 {
533 skb = dev_alloc_skb(scc->stat.bufsize);
534 if (skb == NULL)
535 {
536 scc->dev_stat.rx_dropped++;
537 scc->stat.nospace++;
538 Inb(scc->data);
539 or(scc, R3, ENT_HM);
540 return;
541 }
542
543 scc->rx_buff = skb;
544 *(skb_put(skb, 1)) = 0; /* KISS data */
545 }
546
547 if (skb->len >= scc->stat.bufsize)
548 {
549#ifdef notdef
550 printk(KERN_DEBUG "z8530drv: oops, scc_rxint() received huge frame...\n");
551#endif
552 dev_kfree_skb_irq(skb);
553 scc->rx_buff = NULL;
554 Inb(scc->data);
555 or(scc, R3, ENT_HM);
556 return;
557 }
558
559 *(skb_put(skb, 1)) = Inb(scc->data);
560}
561
562
563/* Receive Special Condition interrupt handler */
564static inline void scc_spint(struct scc_channel *scc)
565{
566 unsigned char status;
567 struct sk_buff *skb;
568
569 scc->stat.spints++;
570
571 status = InReg(scc->ctrl,R1); /* read receiver status */
572
573 Inb(scc->data); /* throw away Rx byte */
574 skb = scc->rx_buff;
575
576 if(status & Rx_OVR) /* receiver overrun */
577 {
578 scc->stat.rx_over++; /* count them */
579 or(scc,R3,ENT_HM); /* enter hunt mode for next flag */
580
581 if (skb != NULL)
582 dev_kfree_skb_irq(skb);
583 scc->rx_buff = skb = NULL;
584 }
585
586 if(status & END_FR && skb != NULL) /* end of frame */
587 {
588 /* CRC okay, frame ends on 8 bit boundary and received something ? */
589
590 if (!(status & CRC_ERR) && (status & 0xe) == RES8 && skb->len > 0)
591 {
592 /* ignore last received byte (first of the CRC bytes) */
593 skb_trim(skb, skb->len-1);
594 scc_net_rx(scc, skb);
595 scc->rx_buff = NULL;
596 scc->stat.rxframes++;
597 } else { /* a bad frame */
598 dev_kfree_skb_irq(skb);
599 scc->rx_buff = NULL;
600 scc->stat.rxerrs++;
601 }
602 }
603
604 Outb(scc->ctrl,ERR_RES);
605}
606
607
608/* ----> interrupt service routine for the Z8530 <---- */
609
610static void scc_isr_dispatch(struct scc_channel *scc, int vector)
611{
612 spin_lock(&scc->lock);
613 switch (vector & VECTOR_MASK)
614 {
615 case TXINT: scc_txint(scc); break;
616 case EXINT: scc_exint(scc); break;
617 case RXINT: scc_rxint(scc); break;
618 case SPINT: scc_spint(scc); break;
619 }
620 spin_unlock(&scc->lock);
621}
622
623/* If the card has a latch for the interrupt vector (like the PA0HZP card)
624 use it to get the number of the chip that generated the int.
625 If not: poll all defined chips.
626 */
627
628#define SCC_IRQTIMEOUT 30000
629
630static irqreturn_t scc_isr(int irq, void *dev_id, struct pt_regs *regs)
631{
632 unsigned char vector;
633 struct scc_channel *scc;
634 struct scc_ctrl *ctrl;
635 int k;
636
637 if (Vector_Latch)
638 {
639 for(k=0; k < SCC_IRQTIMEOUT; k++)
640 {
641 Outb(Vector_Latch, 0); /* Generate INTACK */
642
643 /* Read the vector */
644 if((vector=Inb(Vector_Latch)) >= 16 * Nchips) break;
645 if (vector & 0x01) break;
646
647 scc=&SCC_Info[vector >> 3 ^ 0x01];
648 if (!scc->dev) break;
649
650 scc_isr_dispatch(scc, vector);
651
652 OutReg(scc->ctrl,R0,RES_H_IUS); /* Reset Highest IUS */
653 }
654
655 if (k == SCC_IRQTIMEOUT)
656 printk(KERN_WARNING "z8530drv: endless loop in scc_isr()?\n");
657
658 return IRQ_HANDLED;
659 }
660
661 /* Find the SCC generating the interrupt by polling all attached SCCs
662 * reading RR3A (the interrupt pending register)
663 */
664
665 ctrl = SCC_ctrl;
666 while (ctrl->chan_A)
667 {
668 if (ctrl->irq != irq)
669 {
670 ctrl++;
671 continue;
672 }
673
674 scc = NULL;
675 for (k = 0; InReg(ctrl->chan_A,R3) && k < SCC_IRQTIMEOUT; k++)
676 {
677 vector=InReg(ctrl->chan_B,R2); /* Read the vector */
678 if (vector & 0x01) break;
679
680 scc = &SCC_Info[vector >> 3 ^ 0x01];
681 if (!scc->dev) break;
682
683 scc_isr_dispatch(scc, vector);
684 }
685
686 if (k == SCC_IRQTIMEOUT)
687 {
688 printk(KERN_WARNING "z8530drv: endless loop in scc_isr()?!\n");
689 break;
690 }
691
692 /* This looks weird and it is. At least the BayCom USCC doesn't
693 * use the Interrupt Daisy Chain, thus we'll have to start
694 * all over again to be sure not to miss an interrupt from
695 * (any of) the other chip(s)...
696 * Honestly, the situation *is* braindamaged...
697 */
698
699 if (scc != NULL)
700 {
701 OutReg(scc->ctrl,R0,RES_H_IUS);
702 ctrl = SCC_ctrl;
703 } else
704 ctrl++;
705 }
706 return IRQ_HANDLED;
707}
708
709
710
711/* ******************************************************************** */
712/* * Init Channel */
713/* ******************************************************************** */
714
715
716/* ----> set SCC channel speed <---- */
717
718static inline void set_brg(struct scc_channel *scc, unsigned int tc)
719{
720 cl(scc,R14,BRENABL); /* disable baudrate generator */
721 wr(scc,R12,tc & 255); /* brg rate LOW */
722 wr(scc,R13,tc >> 8); /* brg rate HIGH */
723 or(scc,R14,BRENABL); /* enable baudrate generator */
724}
725
726static inline void set_speed(struct scc_channel *scc)
727{
728 unsigned long flags;
729 spin_lock_irqsave(&scc->lock, flags);
730
731 if (scc->modem.speed > 0) /* paranoia... */
732 set_brg(scc, (unsigned) (scc->clock / (scc->modem.speed * 64)) - 2);
733
734 spin_unlock_irqrestore(&scc->lock, flags);
735}
736
737
738/* ----> initialize a SCC channel <---- */
739
740static inline void init_brg(struct scc_channel *scc)
741{
742 wr(scc, R14, BRSRC); /* BRG source = PCLK */
743 OutReg(scc->ctrl, R14, SSBR|scc->wreg[R14]); /* DPLL source = BRG */
744 OutReg(scc->ctrl, R14, SNRZI|scc->wreg[R14]); /* DPLL NRZI mode */
745}
746
747/*
748 * Initialization according to the Z8530 manual (SGS-Thomson's version):
749 *
750 * 1. Modes and constants
751 *
752 * WR9 11000000 chip reset
753 * WR4 XXXXXXXX Tx/Rx control, async or sync mode
754 * WR1 0XX00X00 select W/REQ (optional)
755 * WR2 XXXXXXXX program interrupt vector
756 * WR3 XXXXXXX0 select Rx control
757 * WR5 XXXX0XXX select Tx control
758 * WR6 XXXXXXXX sync character
759 * WR7 XXXXXXXX sync character
760 * WR9 000X0XXX select interrupt control
761 * WR10 XXXXXXXX miscellaneous control (optional)
762 * WR11 XXXXXXXX clock control
763 * WR12 XXXXXXXX time constant lower byte (optional)
764 * WR13 XXXXXXXX time constant upper byte (optional)
765 * WR14 XXXXXXX0 miscellaneous control
766 * WR14 XXXSSSSS commands (optional)
767 *
768 * 2. Enables
769 *
770 * WR14 000SSSS1 baud rate enable
771 * WR3 SSSSSSS1 Rx enable
772 * WR5 SSSS1SSS Tx enable
773 * WR0 10000000 reset Tx CRG (optional)
774 * WR1 XSS00S00 DMA enable (optional)
775 *
776 * 3. Interrupt status
777 *
778 * WR15 XXXXXXXX enable external/status
779 * WR0 00010000 reset external status
780 * WR0 00010000 reset external status twice
781 * WR1 SSSXXSXX enable Rx, Tx and Ext/status
782 * WR9 000SXSSS enable master interrupt enable
783 *
784 * 1 = set to one, 0 = reset to zero
785 * X = user defined, S = same as previous init
786 *
787 *
788 * Note that the implementation differs in some points from above scheme.
789 *
790 */
791
792static void init_channel(struct scc_channel *scc)
793{
794 del_timer(&scc->tx_t);
795 del_timer(&scc->tx_wdog);
796
797 disable_irq(scc->irq);
798
799 wr(scc,R4,X1CLK|SDLC); /* *1 clock, SDLC mode */
800 wr(scc,R1,0); /* no W/REQ operation */
801 wr(scc,R3,Rx8|RxCRC_ENAB); /* RX 8 bits/char, CRC, disabled */
802 wr(scc,R5,Tx8|DTR|TxCRC_ENAB); /* TX 8 bits/char, disabled, DTR */
803 wr(scc,R6,0); /* SDLC address zero (not used) */
804 wr(scc,R7,FLAG); /* SDLC flag value */
805 wr(scc,R9,VIS); /* vector includes status */
806 wr(scc,R10,(scc->modem.nrz? NRZ : NRZI)|CRCPS|ABUNDER); /* abort on underrun, preset CRC generator, NRZ(I) */
807 wr(scc,R14, 0);
808
809
810/* set clock sources:
811
812 CLK_DPLL: normal halfduplex operation
813
814 RxClk: use DPLL
815 TxClk: use DPLL
816 TRxC mode DPLL output
817
818 CLK_EXTERNAL: external clocking (G3RUH or DF9IC modem)
819
820 BayCom: others:
821
822 TxClk = pin RTxC TxClk = pin TRxC
823 RxClk = pin TRxC RxClk = pin RTxC
824
825
826 CLK_DIVIDER:
827 RxClk = use DPLL
828 TxClk = pin RTxC
829
830 BayCom: others:
831 pin TRxC = DPLL pin TRxC = BRG
832 (RxClk * 1) (RxClk * 32)
833*/
834
835
836 switch(scc->modem.clocksrc)
837 {
838 case CLK_DPLL:
839 wr(scc, R11, RCDPLL|TCDPLL|TRxCOI|TRxCDP);
840 init_brg(scc);
841 break;
842
843 case CLK_DIVIDER:
844 wr(scc, R11, ((scc->brand & BAYCOM)? TRxCDP : TRxCBR) | RCDPLL|TCRTxCP|TRxCOI);
845 init_brg(scc);
846 break;
847
848 case CLK_EXTERNAL:
849 wr(scc, R11, (scc->brand & BAYCOM)? RCTRxCP|TCRTxCP : RCRTxCP|TCTRxCP);
850 OutReg(scc->ctrl, R14, DISDPLL);
851 break;
852
853 }
854
855 set_speed(scc); /* set baudrate */
856
857 if(scc->enhanced)
858 {
859 or(scc,R15,SHDLCE|FIFOE); /* enable FIFO, SDLC/HDLC Enhancements (From now R7 is R7') */
860 wr(scc,R7,AUTOEOM);
861 }
862
863 if(scc->kiss.softdcd || (InReg(scc->ctrl,R0) & DCD))
864 /* DCD is now ON */
865 {
866 start_hunt(scc);
867 }
868
869 /* enable ABORT, DCD & SYNC/HUNT interrupts */
870
871 wr(scc,R15, BRKIE|TxUIE|(scc->kiss.softdcd? SYNCIE:DCDIE));
872
873 Outb(scc->ctrl,RES_EXT_INT); /* reset ext/status interrupts */
874 Outb(scc->ctrl,RES_EXT_INT); /* must be done twice */
875
876 or(scc,R1,INT_ALL_Rx|TxINT_ENAB|EXT_INT_ENAB); /* enable interrupts */
877
878 scc->status = InReg(scc->ctrl,R0); /* read initial status */
879
880 or(scc,R9,MIE); /* master interrupt enable */
881
882 scc_init_timer(scc);
883
884 enable_irq(scc->irq);
885}
886
887
888
889
890/* ******************************************************************** */
891/* * SCC timer functions * */
892/* ******************************************************************** */
893
894
895/* ----> scc_key_trx sets the time constant for the baudrate
896 generator and keys the transmitter <---- */
897
898static void scc_key_trx(struct scc_channel *scc, char tx)
899{
900 unsigned int time_const;
901
902 if (scc->brand & PRIMUS)
903 Outb(scc->ctrl + 4, scc->option | (tx? 0x80 : 0));
904
905 if (scc->modem.speed < 300)
906 scc->modem.speed = 1200;
907
908 time_const = (unsigned) (scc->clock / (scc->modem.speed * (tx? 2:64))) - 2;
909
910 disable_irq(scc->irq);
911
912 if (tx)
913 {
914 or(scc, R1, TxINT_ENAB); /* t_maxkeyup may have reset these */
915 or(scc, R15, TxUIE);
916 }
917
918 if (scc->modem.clocksrc == CLK_DPLL)
919 { /* force simplex operation */
920 if (tx)
921 {
922#ifdef CONFIG_SCC_TRXECHO
923 cl(scc, R3, RxENABLE|ENT_HM); /* switch off receiver */
924 cl(scc, R15, DCDIE|SYNCIE); /* No DCD changes, please */
925#endif
926 set_brg(scc, time_const); /* reprogram baudrate generator */
927
928 /* DPLL -> Rx clk, BRG -> Tx CLK, TRxC mode output, TRxC = BRG */
929 wr(scc, R11, RCDPLL|TCBR|TRxCOI|TRxCBR);
930
931 /* By popular demand: tx_inhibit */
932 if (scc->kiss.tx_inhibit)
933 {
934 or(scc,R5, TxENAB);
935 scc->wreg[R5] |= RTS;
936 } else {
937 or(scc,R5,RTS|TxENAB); /* set the RTS line and enable TX */
938 }
939 } else {
940 cl(scc,R5,RTS|TxENAB);
941
942 set_brg(scc, time_const); /* reprogram baudrate generator */
943
944 /* DPLL -> Rx clk, DPLL -> Tx CLK, TRxC mode output, TRxC = DPLL */
945 wr(scc, R11, RCDPLL|TCDPLL|TRxCOI|TRxCDP);
946
947#ifndef CONFIG_SCC_TRXECHO
948 if (scc->kiss.softdcd)
949#endif
950 {
951 or(scc,R15, scc->kiss.softdcd? SYNCIE:DCDIE);
952 start_hunt(scc);
953 }
954 }
955 } else {
956 if (tx)
957 {
958#ifdef CONFIG_SCC_TRXECHO
959 if (scc->kiss.fulldup == KISS_DUPLEX_HALF)
960 {
961 cl(scc, R3, RxENABLE);
962 cl(scc, R15, DCDIE|SYNCIE);
963 }
964#endif
965
966 if (scc->kiss.tx_inhibit)
967 {
968 or(scc,R5, TxENAB);
969 scc->wreg[R5] |= RTS;
970 } else {
971 or(scc,R5,RTS|TxENAB); /* enable tx */
972 }
973 } else {
974 cl(scc,R5,RTS|TxENAB); /* disable tx */
975
976 if ((scc->kiss.fulldup == KISS_DUPLEX_HALF) &&
977#ifndef CONFIG_SCC_TRXECHO
978 scc->kiss.softdcd)
979#else
980 1)
981#endif
982 {
983 or(scc, R15, scc->kiss.softdcd? SYNCIE:DCDIE);
984 start_hunt(scc);
985 }
986 }
987 }
988
989 enable_irq(scc->irq);
990}
991
992
993/* ----> SCC timer interrupt handler and friends. <---- */
994
995static void __scc_start_tx_timer(struct scc_channel *scc, void (*handler)(unsigned long), unsigned long when)
996{
997 del_timer(&scc->tx_t);
998
999 if (when == 0)
1000 {
1001 handler((unsigned long) scc);
1002 } else
1003 if (when != TIMER_OFF)
1004 {
1005 scc->tx_t.data = (unsigned long) scc;
1006 scc->tx_t.function = handler;
1007 scc->tx_t.expires = jiffies + (when*HZ)/100;
1008 add_timer(&scc->tx_t);
1009 }
1010}
1011
1012static void scc_start_tx_timer(struct scc_channel *scc, void (*handler)(unsigned long), unsigned long when)
1013{
1014 unsigned long flags;
1015
1016 spin_lock_irqsave(&scc->lock, flags);
1017 __scc_start_tx_timer(scc, handler, when);
1018 spin_unlock_irqrestore(&scc->lock, flags);
1019}
1020
1021static void scc_start_defer(struct scc_channel *scc)
1022{
1023 unsigned long flags;
1024
1025 spin_lock_irqsave(&scc->lock, flags);
1026 del_timer(&scc->tx_wdog);
1027
1028 if (scc->kiss.maxdefer != 0 && scc->kiss.maxdefer != TIMER_OFF)
1029 {
1030 scc->tx_wdog.data = (unsigned long) scc;
1031 scc->tx_wdog.function = t_busy;
1032 scc->tx_wdog.expires = jiffies + HZ*scc->kiss.maxdefer;
1033 add_timer(&scc->tx_wdog);
1034 }
1035 spin_unlock_irqrestore(&scc->lock, flags);
1036}
1037
1038static void scc_start_maxkeyup(struct scc_channel *scc)
1039{
1040 unsigned long flags;
1041
1042 spin_lock_irqsave(&scc->lock, flags);
1043 del_timer(&scc->tx_wdog);
1044
1045 if (scc->kiss.maxkeyup != 0 && scc->kiss.maxkeyup != TIMER_OFF)
1046 {
1047 scc->tx_wdog.data = (unsigned long) scc;
1048 scc->tx_wdog.function = t_maxkeyup;
1049 scc->tx_wdog.expires = jiffies + HZ*scc->kiss.maxkeyup;
1050 add_timer(&scc->tx_wdog);
1051 }
1052 spin_unlock_irqrestore(&scc->lock, flags);
1053}
1054
1055/*
1056 * This is called from scc_txint() when there are no more frames to send.
1057 * Not exactly a timer function, but it is a close friend of the family...
1058 */
1059
1060static void scc_tx_done(struct scc_channel *scc)
1061{
1062 /*
1063 * trx remains keyed in fulldup mode 2 until t_idle expires.
1064 */
1065
1066 switch (scc->kiss.fulldup)
1067 {
1068 case KISS_DUPLEX_LINK:
1069 scc->stat.tx_state = TXS_IDLE2;
1070 if (scc->kiss.idletime != TIMER_OFF)
1071 scc_start_tx_timer(scc, t_idle, scc->kiss.idletime*100);
1072 break;
1073 case KISS_DUPLEX_OPTIMA:
1074 scc_notify(scc, HWEV_ALL_SENT);
1075 break;
1076 default:
1077 scc->stat.tx_state = TXS_BUSY;
1078 scc_start_tx_timer(scc, t_tail, scc->kiss.tailtime);
1079 }
1080
1081 netif_wake_queue(scc->dev);
1082}
1083
1084
1085static unsigned char Rand = 17;
1086
1087static inline int is_grouped(struct scc_channel *scc)
1088{
1089 int k;
1090 struct scc_channel *scc2;
1091 unsigned char grp1, grp2;
1092
1093 grp1 = scc->kiss.group;
1094
1095 for (k = 0; k < (Nchips * 2); k++)
1096 {
1097 scc2 = &SCC_Info[k];
1098 grp2 = scc2->kiss.group;
1099
1100 if (scc2 == scc || !(scc2->dev && grp2))
1101 continue;
1102
1103 if ((grp1 & 0x3f) == (grp2 & 0x3f))
1104 {
1105 if ( (grp1 & TXGROUP) && (scc2->wreg[R5] & RTS) )
1106 return 1;
1107
1108 if ( (grp1 & RXGROUP) && scc2->dcd )
1109 return 1;
1110 }
1111 }
1112 return 0;
1113}
1114
1115/* DWAIT and SLOTTIME expired
1116 *
1117 * fulldup == 0: DCD is active or Rand > P-persistence: start t_busy timer
1118 * else key trx and start txdelay
1119 * fulldup == 1: key trx and start txdelay
1120 * fulldup == 2: mintime expired, reset status or key trx and start txdelay
1121 */
1122
1123static void t_dwait(unsigned long channel)
1124{
1125 struct scc_channel *scc = (struct scc_channel *) channel;
1126
1127 if (scc->stat.tx_state == TXS_WAIT) /* maxkeyup or idle timeout */
1128 {
David S. Millerb03efcf2005-07-08 14:57:23 -07001129 if (skb_queue_empty(&scc->tx_queue)) { /* nothing to send */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001130 scc->stat.tx_state = TXS_IDLE;
1131 netif_wake_queue(scc->dev); /* t_maxkeyup locked it. */
1132 return;
1133 }
1134
1135 scc->stat.tx_state = TXS_BUSY;
1136 }
1137
1138 if (scc->kiss.fulldup == KISS_DUPLEX_HALF)
1139 {
1140 Rand = Rand * 17 + 31;
1141
1142 if (scc->dcd || (scc->kiss.persist) < Rand || (scc->kiss.group && is_grouped(scc)) )
1143 {
1144 scc_start_defer(scc);
1145 scc_start_tx_timer(scc, t_dwait, scc->kiss.slottime);
1146 return ;
1147 }
1148 }
1149
1150 if ( !(scc->wreg[R5] & RTS) )
1151 {
1152 scc_key_trx(scc, TX_ON);
1153 scc_start_tx_timer(scc, t_txdelay, scc->kiss.txdelay);
1154 } else {
1155 scc_start_tx_timer(scc, t_txdelay, 0);
1156 }
1157}
1158
1159
1160/* TXDELAY expired
1161 *
1162 * kick transmission by a fake scc_txint(scc), start 'maxkeyup' watchdog.
1163 */
1164
1165static void t_txdelay(unsigned long channel)
1166{
1167 struct scc_channel *scc = (struct scc_channel *) channel;
1168
1169 scc_start_maxkeyup(scc);
1170
1171 if (scc->tx_buff == NULL)
1172 {
1173 disable_irq(scc->irq);
1174 scc_txint(scc);
1175 enable_irq(scc->irq);
1176 }
1177}
1178
1179
1180/* TAILTIME expired
1181 *
1182 * switch off transmitter. If we were stopped by Maxkeyup restart
1183 * transmission after 'mintime' seconds
1184 */
1185
1186static void t_tail(unsigned long channel)
1187{
1188 struct scc_channel *scc = (struct scc_channel *) channel;
1189 unsigned long flags;
1190
1191 spin_lock_irqsave(&scc->lock, flags);
1192 del_timer(&scc->tx_wdog);
1193 scc_key_trx(scc, TX_OFF);
1194 spin_unlock_irqrestore(&scc->lock, flags);
1195
1196 if (scc->stat.tx_state == TXS_TIMEOUT) /* we had a timeout? */
1197 {
1198 scc->stat.tx_state = TXS_WAIT;
1199 scc_start_tx_timer(scc, t_dwait, scc->kiss.mintime*100);
1200 return;
1201 }
1202
1203 scc->stat.tx_state = TXS_IDLE;
1204 netif_wake_queue(scc->dev);
1205}
1206
1207
1208/* BUSY timeout
1209 *
1210 * throw away send buffers if DCD remains active too long.
1211 */
1212
1213static void t_busy(unsigned long channel)
1214{
1215 struct scc_channel *scc = (struct scc_channel *) channel;
1216
1217 del_timer(&scc->tx_t);
1218 netif_stop_queue(scc->dev); /* don't pile on the wabbit! */
1219
1220 scc_discard_buffers(scc);
1221 scc->stat.txerrs++;
1222 scc->stat.tx_state = TXS_IDLE;
1223
1224 netif_wake_queue(scc->dev);
1225}
1226
1227/* MAXKEYUP timeout
1228 *
1229 * this is our watchdog.
1230 */
1231
1232static void t_maxkeyup(unsigned long channel)
1233{
1234 struct scc_channel *scc = (struct scc_channel *) channel;
1235 unsigned long flags;
1236
1237 spin_lock_irqsave(&scc->lock, flags);
1238 /*
1239 * let things settle down before we start to
1240 * accept new data.
1241 */
1242
1243 netif_stop_queue(scc->dev);
1244 scc_discard_buffers(scc);
1245
1246 del_timer(&scc->tx_t);
1247
1248 cl(scc, R1, TxINT_ENAB); /* force an ABORT, but don't */
1249 cl(scc, R15, TxUIE); /* count it. */
1250 OutReg(scc->ctrl, R0, RES_Tx_P);
1251
1252 spin_unlock_irqrestore(&scc->lock, flags);
1253
1254 scc->stat.txerrs++;
1255 scc->stat.tx_state = TXS_TIMEOUT;
1256 scc_start_tx_timer(scc, t_tail, scc->kiss.tailtime);
1257}
1258
1259/* IDLE timeout
1260 *
1261 * in fulldup mode 2 it keys down the transmitter after 'idle' seconds
1262 * of inactivity. We will not restart transmission before 'mintime'
1263 * expires.
1264 */
1265
1266static void t_idle(unsigned long channel)
1267{
1268 struct scc_channel *scc = (struct scc_channel *) channel;
1269
1270 del_timer(&scc->tx_wdog);
1271
1272 scc_key_trx(scc, TX_OFF);
1273 if(scc->kiss.mintime)
1274 scc_start_tx_timer(scc, t_dwait, scc->kiss.mintime*100);
1275 scc->stat.tx_state = TXS_WAIT;
1276}
1277
1278static void scc_init_timer(struct scc_channel *scc)
1279{
1280 unsigned long flags;
1281
1282 spin_lock_irqsave(&scc->lock, flags);
1283 scc->stat.tx_state = TXS_IDLE;
1284 spin_unlock_irqrestore(&scc->lock, flags);
1285}
1286
1287
1288/* ******************************************************************** */
1289/* * Set/get L1 parameters * */
1290/* ******************************************************************** */
1291
1292
1293/*
1294 * this will set the "hardware" parameters through KISS commands or ioctl()
1295 */
1296
1297#define CAST(x) (unsigned long)(x)
1298
1299static unsigned int scc_set_param(struct scc_channel *scc, unsigned int cmd, unsigned int arg)
1300{
1301 switch (cmd)
1302 {
1303 case PARAM_TXDELAY: scc->kiss.txdelay=arg; break;
1304 case PARAM_PERSIST: scc->kiss.persist=arg; break;
1305 case PARAM_SLOTTIME: scc->kiss.slottime=arg; break;
1306 case PARAM_TXTAIL: scc->kiss.tailtime=arg; break;
1307 case PARAM_FULLDUP: scc->kiss.fulldup=arg; break;
1308 case PARAM_DTR: break; /* does someone need this? */
1309 case PARAM_GROUP: scc->kiss.group=arg; break;
1310 case PARAM_IDLE: scc->kiss.idletime=arg; break;
1311 case PARAM_MIN: scc->kiss.mintime=arg; break;
1312 case PARAM_MAXKEY: scc->kiss.maxkeyup=arg; break;
1313 case PARAM_WAIT: scc->kiss.waittime=arg; break;
1314 case PARAM_MAXDEFER: scc->kiss.maxdefer=arg; break;
1315 case PARAM_TX: scc->kiss.tx_inhibit=arg; break;
1316
1317 case PARAM_SOFTDCD:
1318 scc->kiss.softdcd=arg;
1319 if (arg)
1320 {
1321 or(scc, R15, SYNCIE);
1322 cl(scc, R15, DCDIE);
1323 start_hunt(scc);
1324 } else {
1325 or(scc, R15, DCDIE);
1326 cl(scc, R15, SYNCIE);
1327 }
1328 break;
1329
1330 case PARAM_SPEED:
1331 if (arg < 256)
1332 scc->modem.speed=arg*100;
1333 else
1334 scc->modem.speed=arg;
1335
1336 if (scc->stat.tx_state == 0) /* only switch baudrate on rx... ;-) */
1337 set_speed(scc);
1338 break;
1339
1340 case PARAM_RTS:
1341 if ( !(scc->wreg[R5] & RTS) )
1342 {
1343 if (arg != TX_OFF)
1344 scc_key_trx(scc, TX_ON);
1345 scc_start_tx_timer(scc, t_txdelay, scc->kiss.txdelay);
1346 } else {
1347 if (arg == TX_OFF)
1348 {
1349 scc->stat.tx_state = TXS_BUSY;
1350 scc_start_tx_timer(scc, t_tail, scc->kiss.tailtime);
1351 }
1352 }
1353 break;
1354
1355 case PARAM_HWEVENT:
1356 scc_notify(scc, scc->dcd? HWEV_DCD_ON:HWEV_DCD_OFF);
1357 break;
1358
1359 default: return -EINVAL;
1360 }
1361
1362 return 0;
1363}
1364
1365
1366
1367static unsigned long scc_get_param(struct scc_channel *scc, unsigned int cmd)
1368{
1369 switch (cmd)
1370 {
1371 case PARAM_TXDELAY: return CAST(scc->kiss.txdelay);
1372 case PARAM_PERSIST: return CAST(scc->kiss.persist);
1373 case PARAM_SLOTTIME: return CAST(scc->kiss.slottime);
1374 case PARAM_TXTAIL: return CAST(scc->kiss.tailtime);
1375 case PARAM_FULLDUP: return CAST(scc->kiss.fulldup);
1376 case PARAM_SOFTDCD: return CAST(scc->kiss.softdcd);
1377 case PARAM_DTR: return CAST((scc->wreg[R5] & DTR)? 1:0);
1378 case PARAM_RTS: return CAST((scc->wreg[R5] & RTS)? 1:0);
1379 case PARAM_SPEED: return CAST(scc->modem.speed);
1380 case PARAM_GROUP: return CAST(scc->kiss.group);
1381 case PARAM_IDLE: return CAST(scc->kiss.idletime);
1382 case PARAM_MIN: return CAST(scc->kiss.mintime);
1383 case PARAM_MAXKEY: return CAST(scc->kiss.maxkeyup);
1384 case PARAM_WAIT: return CAST(scc->kiss.waittime);
1385 case PARAM_MAXDEFER: return CAST(scc->kiss.maxdefer);
1386 case PARAM_TX: return CAST(scc->kiss.tx_inhibit);
1387 default: return NO_SUCH_PARAM;
1388 }
1389
1390}
1391
1392#undef CAST
1393
1394/* ******************************************************************* */
1395/* * Send calibration pattern * */
1396/* ******************************************************************* */
1397
1398static void scc_stop_calibrate(unsigned long channel)
1399{
1400 struct scc_channel *scc = (struct scc_channel *) channel;
1401 unsigned long flags;
1402
1403 spin_lock_irqsave(&scc->lock, flags);
1404 del_timer(&scc->tx_wdog);
1405 scc_key_trx(scc, TX_OFF);
1406 wr(scc, R6, 0);
1407 wr(scc, R7, FLAG);
1408 Outb(scc->ctrl,RES_EXT_INT); /* reset ext/status interrupts */
1409 Outb(scc->ctrl,RES_EXT_INT);
1410
1411 netif_wake_queue(scc->dev);
1412 spin_unlock_irqrestore(&scc->lock, flags);
1413}
1414
1415
1416static void
1417scc_start_calibrate(struct scc_channel *scc, int duration, unsigned char pattern)
1418{
1419 unsigned long flags;
1420
1421 spin_lock_irqsave(&scc->lock, flags);
1422 netif_stop_queue(scc->dev);
1423 scc_discard_buffers(scc);
1424
1425 del_timer(&scc->tx_wdog);
1426
1427 scc->tx_wdog.data = (unsigned long) scc;
1428 scc->tx_wdog.function = scc_stop_calibrate;
1429 scc->tx_wdog.expires = jiffies + HZ*duration;
1430 add_timer(&scc->tx_wdog);
1431
1432 /* This doesn't seem to work. Why not? */
1433 wr(scc, R6, 0);
1434 wr(scc, R7, pattern);
1435
1436 /*
1437 * Don't know if this works.
1438 * Damn, where is my Z8530 programming manual...?
1439 */
1440
1441 Outb(scc->ctrl,RES_EXT_INT); /* reset ext/status interrupts */
1442 Outb(scc->ctrl,RES_EXT_INT);
1443
1444 scc_key_trx(scc, TX_ON);
1445 spin_unlock_irqrestore(&scc->lock, flags);
1446}
1447
1448/* ******************************************************************* */
1449/* * Init channel structures, special HW, etc... * */
1450/* ******************************************************************* */
1451
1452/*
1453 * Reset the Z8530s and setup special hardware
1454 */
1455
1456static void z8530_init(void)
1457{
1458 struct scc_channel *scc;
1459 int chip, k;
1460 unsigned long flags;
1461 char *flag;
1462
1463
1464 printk(KERN_INFO "Init Z8530 driver: %u channels, IRQ", Nchips*2);
1465
1466 flag=" ";
1467 for (k = 0; k < NR_IRQS; k++)
1468 if (Ivec[k].used)
1469 {
1470 printk("%s%d", flag, k);
1471 flag=",";
1472 }
1473 printk("\n");
1474
1475
1476 /* reset and pre-init all chips in the system */
1477 for (chip = 0; chip < Nchips; chip++)
1478 {
1479 scc=&SCC_Info[2*chip];
1480 if (!scc->ctrl) continue;
1481
1482 /* Special SCC cards */
1483
1484 if(scc->brand & EAGLE) /* this is an EAGLE card */
1485 Outb(scc->special,0x08); /* enable interrupt on the board */
1486
1487 if(scc->brand & (PC100 | PRIMUS)) /* this is a PC100/PRIMUS card */
1488 Outb(scc->special,scc->option); /* set the MODEM mode (0x22) */
1489
1490
1491 /* Reset and pre-init Z8530 */
1492
1493 spin_lock_irqsave(&scc->lock, flags);
1494
1495 Outb(scc->ctrl, 0);
1496 OutReg(scc->ctrl,R9,FHWRES); /* force hardware reset */
1497 udelay(100); /* give it 'a bit' more time than required */
1498 wr(scc, R2, chip*16); /* interrupt vector */
1499 wr(scc, R9, VIS); /* vector includes status */
1500 spin_unlock_irqrestore(&scc->lock, flags);
1501 }
1502
1503
1504 Driver_Initialized = 1;
1505}
1506
1507/*
1508 * Allocate device structure, err, instance, and register driver
1509 */
1510
1511static int scc_net_alloc(const char *name, struct scc_channel *scc)
1512{
1513 int err;
1514 struct net_device *dev;
1515
1516 dev = alloc_netdev(0, name, scc_net_setup);
1517 if (!dev)
1518 return -ENOMEM;
1519
1520 dev->priv = scc;
1521 scc->dev = dev;
1522 spin_lock_init(&scc->lock);
1523 init_timer(&scc->tx_t);
1524 init_timer(&scc->tx_wdog);
1525
1526 err = register_netdevice(dev);
1527 if (err) {
1528 printk(KERN_ERR "%s: can't register network device (%d)\n",
1529 name, err);
1530 free_netdev(dev);
1531 scc->dev = NULL;
1532 return err;
1533 }
1534
1535 return 0;
1536}
1537
1538
1539
1540/* ******************************************************************** */
1541/* * Network driver methods * */
1542/* ******************************************************************** */
1543
1544static unsigned char ax25_bcast[AX25_ADDR_LEN] =
1545{'Q' << 1, 'S' << 1, 'T' << 1, ' ' << 1, ' ' << 1, ' ' << 1, '0' << 1};
1546static unsigned char ax25_nocall[AX25_ADDR_LEN] =
1547{'L' << 1, 'I' << 1, 'N' << 1, 'U' << 1, 'X' << 1, ' ' << 1, '1' << 1};
1548
1549/* ----> Initialize device <----- */
1550
1551static void scc_net_setup(struct net_device *dev)
1552{
1553 SET_MODULE_OWNER(dev);
1554 dev->tx_queue_len = 16; /* should be enough... */
1555
1556 dev->open = scc_net_open;
1557 dev->stop = scc_net_close;
1558
1559 dev->hard_start_xmit = scc_net_tx;
Ralf Baechle6f749982005-09-12 14:21:01 -07001560 dev->hard_header = ax25_hard_header;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001561 dev->rebuild_header = ax25_rebuild_header;
1562 dev->set_mac_address = scc_net_set_mac_address;
1563 dev->get_stats = scc_net_get_stats;
1564 dev->do_ioctl = scc_net_ioctl;
1565 dev->tx_timeout = NULL;
1566
1567 memcpy(dev->broadcast, ax25_bcast, AX25_ADDR_LEN);
1568 memcpy(dev->dev_addr, ax25_nocall, AX25_ADDR_LEN);
1569
1570 dev->flags = 0;
1571
1572 dev->type = ARPHRD_AX25;
1573 dev->hard_header_len = AX25_MAX_HEADER_LEN + AX25_BPQ_HEADER_LEN;
1574 dev->mtu = AX25_DEF_PACLEN;
1575 dev->addr_len = AX25_ADDR_LEN;
1576
1577}
1578
1579/* ----> open network device <---- */
1580
1581static int scc_net_open(struct net_device *dev)
1582{
1583 struct scc_channel *scc = (struct scc_channel *) dev->priv;
1584
1585 if (!scc->init)
1586 return -EINVAL;
1587
1588 scc->tx_buff = NULL;
1589 skb_queue_head_init(&scc->tx_queue);
1590
1591 init_channel(scc);
1592
1593 netif_start_queue(dev);
1594 return 0;
1595}
1596
1597/* ----> close network device <---- */
1598
1599static int scc_net_close(struct net_device *dev)
1600{
1601 struct scc_channel *scc = (struct scc_channel *) dev->priv;
1602 unsigned long flags;
1603
1604 netif_stop_queue(dev);
1605
1606 spin_lock_irqsave(&scc->lock, flags);
1607 Outb(scc->ctrl,0); /* Make sure pointer is written */
1608 wr(scc,R1,0); /* disable interrupts */
1609 wr(scc,R3,0);
1610 spin_unlock_irqrestore(&scc->lock, flags);
1611
1612 del_timer_sync(&scc->tx_t);
1613 del_timer_sync(&scc->tx_wdog);
1614
1615 scc_discard_buffers(scc);
1616
1617 return 0;
1618}
1619
1620/* ----> receive frame, called from scc_rxint() <---- */
1621
1622static void scc_net_rx(struct scc_channel *scc, struct sk_buff *skb)
1623{
1624 if (skb->len == 0) {
1625 dev_kfree_skb_irq(skb);
1626 return;
1627 }
1628
1629 scc->dev_stat.rx_packets++;
1630 scc->dev_stat.rx_bytes += skb->len;
1631
Arnaldo Carvalho de Melo56cb5152005-04-24 18:53:06 -07001632 skb->protocol = ax25_type_trans(skb, scc->dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001633
1634 netif_rx(skb);
1635 scc->dev->last_rx = jiffies;
1636 return;
1637}
1638
1639/* ----> transmit frame <---- */
1640
1641static int scc_net_tx(struct sk_buff *skb, struct net_device *dev)
1642{
1643 struct scc_channel *scc = (struct scc_channel *) dev->priv;
1644 unsigned long flags;
1645 char kisscmd;
1646
1647 if (skb->len > scc->stat.bufsize || skb->len < 2) {
1648 scc->dev_stat.tx_dropped++; /* bogus frame */
1649 dev_kfree_skb(skb);
1650 return 0;
1651 }
1652
1653 scc->dev_stat.tx_packets++;
1654 scc->dev_stat.tx_bytes += skb->len;
1655 scc->stat.txframes++;
1656
1657 kisscmd = *skb->data & 0x1f;
1658 skb_pull(skb, 1);
1659
1660 if (kisscmd) {
1661 scc_set_param(scc, kisscmd, *skb->data);
1662 dev_kfree_skb(skb);
1663 return 0;
1664 }
1665
1666 spin_lock_irqsave(&scc->lock, flags);
1667
1668 if (skb_queue_len(&scc->tx_queue) > scc->dev->tx_queue_len) {
1669 struct sk_buff *skb_del;
1670 skb_del = skb_dequeue(&scc->tx_queue);
1671 dev_kfree_skb(skb_del);
1672 }
1673 skb_queue_tail(&scc->tx_queue, skb);
1674 dev->trans_start = jiffies;
1675
1676
1677 /*
1678 * Start transmission if the trx state is idle or
1679 * t_idle hasn't expired yet. Use dwait/persistence/slottime
1680 * algorithm for normal halfduplex operation.
1681 */
1682
1683 if(scc->stat.tx_state == TXS_IDLE || scc->stat.tx_state == TXS_IDLE2) {
1684 scc->stat.tx_state = TXS_BUSY;
1685 if (scc->kiss.fulldup == KISS_DUPLEX_HALF)
1686 __scc_start_tx_timer(scc, t_dwait, scc->kiss.waittime);
1687 else
1688 __scc_start_tx_timer(scc, t_dwait, 0);
1689 }
1690 spin_unlock_irqrestore(&scc->lock, flags);
1691 return 0;
1692}
1693
1694/* ----> ioctl functions <---- */
1695
1696/*
1697 * SIOCSCCCFG - configure driver arg: (struct scc_hw_config *) arg
1698 * SIOCSCCINI - initialize driver arg: ---
1699 * SIOCSCCCHANINI - initialize channel arg: (struct scc_modem *) arg
1700 * SIOCSCCSMEM - set memory arg: (struct scc_mem_config *) arg
1701 * SIOCSCCGKISS - get level 1 parameter arg: (struct scc_kiss_cmd *) arg
1702 * SIOCSCCSKISS - set level 1 parameter arg: (struct scc_kiss_cmd *) arg
1703 * SIOCSCCGSTAT - get driver status arg: (struct scc_stat *) arg
1704 * SIOCSCCCAL - send calib. pattern arg: (struct scc_calibrate *) arg
1705 */
1706
1707static int scc_net_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
1708{
1709 struct scc_kiss_cmd kiss_cmd;
1710 struct scc_mem_config memcfg;
1711 struct scc_hw_config hwcfg;
1712 struct scc_calibrate cal;
1713 struct scc_channel *scc = (struct scc_channel *) dev->priv;
1714 int chan;
1715 unsigned char device_name[IFNAMSIZ];
1716 void __user *arg = ifr->ifr_data;
1717
1718
1719 if (!Driver_Initialized)
1720 {
1721 if (cmd == SIOCSCCCFG)
1722 {
1723 int found = 1;
1724
1725 if (!capable(CAP_SYS_RAWIO)) return -EPERM;
1726 if (!arg) return -EFAULT;
1727
1728 if (Nchips >= SCC_MAXCHIPS)
1729 return -EINVAL;
1730
1731 if (copy_from_user(&hwcfg, arg, sizeof(hwcfg)))
1732 return -EFAULT;
1733
1734 if (hwcfg.irq == 2) hwcfg.irq = 9;
1735
1736 if (hwcfg.irq < 0 || hwcfg.irq >= NR_IRQS)
1737 return -EINVAL;
1738
1739 if (!Ivec[hwcfg.irq].used && hwcfg.irq)
1740 {
1741 if (request_irq(hwcfg.irq, scc_isr, SA_INTERRUPT, "AX.25 SCC", NULL))
1742 printk(KERN_WARNING "z8530drv: warning, cannot get IRQ %d\n", hwcfg.irq);
1743 else
1744 Ivec[hwcfg.irq].used = 1;
1745 }
1746
1747 if (hwcfg.vector_latch && !Vector_Latch) {
1748 if (!request_region(hwcfg.vector_latch, 1, "scc vector latch"))
1749 printk(KERN_WARNING "z8530drv: warning, cannot reserve vector latch port 0x%lx\n, disabled.", hwcfg.vector_latch);
1750 else
1751 Vector_Latch = hwcfg.vector_latch;
1752 }
1753
1754 if (hwcfg.clock == 0)
1755 hwcfg.clock = SCC_DEFAULT_CLOCK;
1756
1757#ifndef SCC_DONT_CHECK
1758
1759 if(request_region(hwcfg.ctrl_a, 1, "scc-probe"))
1760 {
1761 disable_irq(hwcfg.irq);
1762 Outb(hwcfg.ctrl_a, 0);
1763 OutReg(hwcfg.ctrl_a, R9, FHWRES);
1764 udelay(100);
1765 OutReg(hwcfg.ctrl_a,R13,0x55); /* is this chip really there? */
1766 udelay(5);
1767
1768 if (InReg(hwcfg.ctrl_a,R13) != 0x55)
1769 found = 0;
1770 enable_irq(hwcfg.irq);
1771 release_region(hwcfg.ctrl_a, 1);
1772 }
1773 else
1774 found = 0;
1775#endif
1776
1777 if (found)
1778 {
1779 SCC_Info[2*Nchips ].ctrl = hwcfg.ctrl_a;
1780 SCC_Info[2*Nchips ].data = hwcfg.data_a;
1781 SCC_Info[2*Nchips ].irq = hwcfg.irq;
1782 SCC_Info[2*Nchips+1].ctrl = hwcfg.ctrl_b;
1783 SCC_Info[2*Nchips+1].data = hwcfg.data_b;
1784 SCC_Info[2*Nchips+1].irq = hwcfg.irq;
1785
1786 SCC_ctrl[Nchips].chan_A = hwcfg.ctrl_a;
1787 SCC_ctrl[Nchips].chan_B = hwcfg.ctrl_b;
1788 SCC_ctrl[Nchips].irq = hwcfg.irq;
1789 }
1790
1791
1792 for (chan = 0; chan < 2; chan++)
1793 {
1794 sprintf(device_name, "%s%i", SCC_DriverName, 2*Nchips+chan);
1795
1796 SCC_Info[2*Nchips+chan].special = hwcfg.special;
1797 SCC_Info[2*Nchips+chan].clock = hwcfg.clock;
1798 SCC_Info[2*Nchips+chan].brand = hwcfg.brand;
1799 SCC_Info[2*Nchips+chan].option = hwcfg.option;
1800 SCC_Info[2*Nchips+chan].enhanced = hwcfg.escc;
1801
1802#ifdef SCC_DONT_CHECK
1803 printk(KERN_INFO "%s: data port = 0x%3.3x control port = 0x%3.3x\n",
1804 device_name,
1805 SCC_Info[2*Nchips+chan].data,
1806 SCC_Info[2*Nchips+chan].ctrl);
1807
1808#else
1809 printk(KERN_INFO "%s: data port = 0x%3.3lx control port = 0x%3.3lx -- %s\n",
1810 device_name,
1811 chan? hwcfg.data_b : hwcfg.data_a,
1812 chan? hwcfg.ctrl_b : hwcfg.ctrl_a,
1813 found? "found" : "missing");
1814#endif
1815
1816 if (found)
1817 {
1818 request_region(SCC_Info[2*Nchips+chan].ctrl, 1, "scc ctrl");
1819 request_region(SCC_Info[2*Nchips+chan].data, 1, "scc data");
1820 if (Nchips+chan != 0 &&
1821 scc_net_alloc(device_name,
1822 &SCC_Info[2*Nchips+chan]))
1823 return -EINVAL;
1824 }
1825 }
1826
1827 if (found) Nchips++;
1828
1829 return 0;
1830 }
1831
1832 if (cmd == SIOCSCCINI)
1833 {
1834 if (!capable(CAP_SYS_RAWIO))
1835 return -EPERM;
1836
1837 if (Nchips == 0)
1838 return -EINVAL;
1839
1840 z8530_init();
1841 return 0;
1842 }
1843
1844 return -EINVAL; /* confuse the user */
1845 }
1846
1847 if (!scc->init)
1848 {
1849 if (cmd == SIOCSCCCHANINI)
1850 {
1851 if (!capable(CAP_NET_ADMIN)) return -EPERM;
1852 if (!arg) return -EINVAL;
1853
1854 scc->stat.bufsize = SCC_BUFSIZE;
1855
1856 if (copy_from_user(&scc->modem, arg, sizeof(struct scc_modem)))
1857 return -EINVAL;
1858
1859 /* default KISS Params */
1860
1861 if (scc->modem.speed < 4800)
1862 {
1863 scc->kiss.txdelay = 36; /* 360 ms */
1864 scc->kiss.persist = 42; /* 25% persistence */ /* was 25 */
1865 scc->kiss.slottime = 16; /* 160 ms */
1866 scc->kiss.tailtime = 4; /* minimal reasonable value */
1867 scc->kiss.fulldup = 0; /* CSMA */
1868 scc->kiss.waittime = 50; /* 500 ms */
1869 scc->kiss.maxkeyup = 10; /* 10 s */
1870 scc->kiss.mintime = 3; /* 3 s */
1871 scc->kiss.idletime = 30; /* 30 s */
1872 scc->kiss.maxdefer = 120; /* 2 min */
1873 scc->kiss.softdcd = 0; /* hardware dcd */
1874 } else {
1875 scc->kiss.txdelay = 10; /* 100 ms */
1876 scc->kiss.persist = 64; /* 25% persistence */ /* was 25 */
1877 scc->kiss.slottime = 8; /* 160 ms */
1878 scc->kiss.tailtime = 1; /* minimal reasonable value */
1879 scc->kiss.fulldup = 0; /* CSMA */
1880 scc->kiss.waittime = 50; /* 500 ms */
1881 scc->kiss.maxkeyup = 7; /* 7 s */
1882 scc->kiss.mintime = 3; /* 3 s */
1883 scc->kiss.idletime = 30; /* 30 s */
1884 scc->kiss.maxdefer = 120; /* 2 min */
1885 scc->kiss.softdcd = 0; /* hardware dcd */
1886 }
1887
1888 scc->tx_buff = NULL;
1889 skb_queue_head_init(&scc->tx_queue);
1890 scc->init = 1;
1891
1892 return 0;
1893 }
1894
1895 return -EINVAL;
1896 }
1897
1898 switch(cmd)
1899 {
1900 case SIOCSCCRESERVED:
1901 return -ENOIOCTLCMD;
1902
1903 case SIOCSCCSMEM:
1904 if (!capable(CAP_SYS_RAWIO)) return -EPERM;
1905 if (!arg || copy_from_user(&memcfg, arg, sizeof(memcfg)))
1906 return -EINVAL;
1907 scc->stat.bufsize = memcfg.bufsize;
1908 return 0;
1909
1910 case SIOCSCCGSTAT:
1911 if (!arg || copy_to_user(arg, &scc->stat, sizeof(scc->stat)))
1912 return -EINVAL;
1913 return 0;
1914
1915 case SIOCSCCGKISS:
1916 if (!arg || copy_from_user(&kiss_cmd, arg, sizeof(kiss_cmd)))
1917 return -EINVAL;
1918 kiss_cmd.param = scc_get_param(scc, kiss_cmd.command);
1919 if (copy_to_user(arg, &kiss_cmd, sizeof(kiss_cmd)))
1920 return -EINVAL;
1921 return 0;
1922
1923 case SIOCSCCSKISS:
1924 if (!capable(CAP_NET_ADMIN)) return -EPERM;
1925 if (!arg || copy_from_user(&kiss_cmd, arg, sizeof(kiss_cmd)))
1926 return -EINVAL;
1927 return scc_set_param(scc, kiss_cmd.command, kiss_cmd.param);
1928
1929 case SIOCSCCCAL:
1930 if (!capable(CAP_SYS_RAWIO)) return -EPERM;
1931 if (!arg || copy_from_user(&cal, arg, sizeof(cal)) || cal.time == 0)
1932 return -EINVAL;
1933
1934 scc_start_calibrate(scc, cal.time, cal.pattern);
1935 return 0;
1936
1937 default:
1938 return -ENOIOCTLCMD;
1939
1940 }
1941
1942 return -EINVAL;
1943}
1944
1945/* ----> set interface callsign <---- */
1946
1947static int scc_net_set_mac_address(struct net_device *dev, void *addr)
1948{
1949 struct sockaddr *sa = (struct sockaddr *) addr;
1950 memcpy(dev->dev_addr, sa->sa_data, dev->addr_len);
1951 return 0;
1952}
1953
1954/* ----> get statistics <---- */
1955
1956static struct net_device_stats *scc_net_get_stats(struct net_device *dev)
1957{
1958 struct scc_channel *scc = (struct scc_channel *) dev->priv;
1959
1960 scc->dev_stat.rx_errors = scc->stat.rxerrs + scc->stat.rx_over;
1961 scc->dev_stat.tx_errors = scc->stat.txerrs + scc->stat.tx_under;
1962 scc->dev_stat.rx_fifo_errors = scc->stat.rx_over;
1963 scc->dev_stat.tx_fifo_errors = scc->stat.tx_under;
1964
1965 return &scc->dev_stat;
1966}
1967
1968/* ******************************************************************** */
1969/* * dump statistics to /proc/net/z8530drv * */
1970/* ******************************************************************** */
1971
1972#ifdef CONFIG_PROC_FS
1973
1974static inline struct scc_channel *scc_net_seq_idx(loff_t pos)
1975{
1976 int k;
1977
1978 for (k = 0; k < Nchips*2; ++k) {
1979 if (!SCC_Info[k].init)
1980 continue;
1981 if (pos-- == 0)
1982 return &SCC_Info[k];
1983 }
1984 return NULL;
1985}
1986
1987static void *scc_net_seq_start(struct seq_file *seq, loff_t *pos)
1988{
1989 return *pos ? scc_net_seq_idx(*pos - 1) : SEQ_START_TOKEN;
1990
1991}
1992
1993static void *scc_net_seq_next(struct seq_file *seq, void *v, loff_t *pos)
1994{
1995 unsigned k;
1996 struct scc_channel *scc = v;
1997 ++*pos;
1998
1999 for (k = (v == SEQ_START_TOKEN) ? 0 : (scc - SCC_Info)+1;
2000 k < Nchips*2; ++k) {
2001 if (SCC_Info[k].init)
2002 return &SCC_Info[k];
2003 }
2004 return NULL;
2005}
2006
2007static void scc_net_seq_stop(struct seq_file *seq, void *v)
2008{
2009}
2010
2011static int scc_net_seq_show(struct seq_file *seq, void *v)
2012{
2013 if (v == SEQ_START_TOKEN) {
2014 seq_puts(seq, "z8530drv-"VERSION"\n");
2015 } else if (!Driver_Initialized) {
2016 seq_puts(seq, "not initialized\n");
2017 } else if (!Nchips) {
2018 seq_puts(seq, "chips missing\n");
2019 } else {
2020 const struct scc_channel *scc = v;
2021 const struct scc_stat *stat = &scc->stat;
2022 const struct scc_kiss *kiss = &scc->kiss;
2023
2024
2025 /* dev data ctrl irq clock brand enh vector special option
2026 * baud nrz clocksrc softdcd bufsize
2027 * rxints txints exints spints
2028 * rcvd rxerrs over / xmit txerrs under / nospace bufsize
2029 * txd pers slot tail ful wait min maxk idl defr txof grp
2030 * W ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
2031 * R ## ## XX ## ## ## ## ## XX ## ## ## ## ## ## ##
2032 */
2033
2034 seq_printf(seq, "%s\t%3.3lx %3.3lx %d %lu %2.2x %d %3.3lx %3.3lx %d\n",
2035 scc->dev->name,
2036 scc->data, scc->ctrl, scc->irq, scc->clock, scc->brand,
2037 scc->enhanced, Vector_Latch, scc->special,
2038 scc->option);
2039 seq_printf(seq, "\t%lu %d %d %d %d\n",
2040 scc->modem.speed, scc->modem.nrz,
2041 scc->modem.clocksrc, kiss->softdcd,
2042 stat->bufsize);
2043 seq_printf(seq, "\t%lu %lu %lu %lu\n",
2044 stat->rxints, stat->txints, stat->exints, stat->spints);
2045 seq_printf(seq, "\t%lu %lu %d / %lu %lu %d / %d %d\n",
2046 stat->rxframes, stat->rxerrs, stat->rx_over,
2047 stat->txframes, stat->txerrs, stat->tx_under,
2048 stat->nospace, stat->tx_state);
2049
2050#define K(x) kiss->x
2051 seq_printf(seq, "\t%d %d %d %d %d %d %d %d %d %d %d %d\n",
2052 K(txdelay), K(persist), K(slottime), K(tailtime),
2053 K(fulldup), K(waittime), K(mintime), K(maxkeyup),
2054 K(idletime), K(maxdefer), K(tx_inhibit), K(group));
2055#undef K
2056#ifdef SCC_DEBUG
2057 {
2058 int reg;
2059
2060 seq_printf(seq, "\tW ");
2061 for (reg = 0; reg < 16; reg++)
2062 seq_printf(seq, "%2.2x ", scc->wreg[reg]);
2063 seq_printf(seq, "\n");
2064
2065 seq_printf(seq, "\tR %2.2x %2.2x XX ", InReg(scc->ctrl,R0), InReg(scc->ctrl,R1));
2066 for (reg = 3; reg < 8; reg++)
2067 seq_printf(seq, "%2.2x ", InReg(scc->ctrl, reg));
2068 seq_printf(seq, "XX ");
2069 for (reg = 9; reg < 16; reg++)
2070 seq_printf(seq, "%2.2x ", InReg(scc->ctrl, reg));
2071 seq_printf(seq, "\n");
2072 }
2073#endif
2074 seq_putc(seq, '\n');
2075 }
2076
2077 return 0;
2078}
2079
2080static struct seq_operations scc_net_seq_ops = {
2081 .start = scc_net_seq_start,
2082 .next = scc_net_seq_next,
2083 .stop = scc_net_seq_stop,
2084 .show = scc_net_seq_show,
2085};
2086
2087
2088static int scc_net_seq_open(struct inode *inode, struct file *file)
2089{
2090 return seq_open(file, &scc_net_seq_ops);
2091}
2092
2093static struct file_operations scc_net_seq_fops = {
2094 .owner = THIS_MODULE,
2095 .open = scc_net_seq_open,
2096 .read = seq_read,
2097 .llseek = seq_lseek,
2098 .release = seq_release_private,
2099};
2100
2101#endif /* CONFIG_PROC_FS */
2102
2103
2104/* ******************************************************************** */
2105/* * Init SCC driver * */
2106/* ******************************************************************** */
2107
2108static int __init scc_init_driver (void)
2109{
2110 char devname[IFNAMSIZ];
2111
2112 printk(banner);
2113
2114 sprintf(devname,"%s0", SCC_DriverName);
2115
2116 rtnl_lock();
2117 if (scc_net_alloc(devname, SCC_Info)) {
2118 rtnl_unlock();
2119 printk(KERN_ERR "z8530drv: cannot initialize module\n");
2120 return -EIO;
2121 }
2122 rtnl_unlock();
2123
2124 proc_net_fops_create("z8530drv", 0, &scc_net_seq_fops);
2125
2126 return 0;
2127}
2128
2129static void __exit scc_cleanup_driver(void)
2130{
2131 io_port ctrl;
2132 int k;
2133 struct scc_channel *scc;
2134 struct net_device *dev;
2135
2136 if (Nchips == 0 && (dev = SCC_Info[0].dev))
2137 {
2138 unregister_netdev(dev);
2139 free_netdev(dev);
2140 }
2141
2142 /* Guard against chip prattle */
2143 local_irq_disable();
2144
2145 for (k = 0; k < Nchips; k++)
2146 if ( (ctrl = SCC_ctrl[k].chan_A) )
2147 {
2148 Outb(ctrl, 0);
2149 OutReg(ctrl,R9,FHWRES); /* force hardware reset */
2150 udelay(50);
2151 }
2152
2153 /* To unload the port must be closed so no real IRQ pending */
2154 for (k=0; k < NR_IRQS ; k++)
2155 if (Ivec[k].used) free_irq(k, NULL);
2156
2157 local_irq_enable();
2158
2159 /* Now clean up */
2160 for (k = 0; k < Nchips*2; k++)
2161 {
2162 scc = &SCC_Info[k];
2163 if (scc->ctrl)
2164 {
2165 release_region(scc->ctrl, 1);
2166 release_region(scc->data, 1);
2167 }
2168 if (scc->dev)
2169 {
2170 unregister_netdev(scc->dev);
2171 free_netdev(scc->dev);
2172 }
2173 }
2174
2175
2176 if (Vector_Latch)
2177 release_region(Vector_Latch, 1);
2178
2179 proc_net_remove("z8530drv");
2180}
2181
2182MODULE_AUTHOR("Joerg Reuter <jreuter@yaina.de>");
2183MODULE_DESCRIPTION("AX.25 Device Driver for Z8530 based HDLC cards");
2184MODULE_SUPPORTED_DEVICE("Z8530 based SCC cards for Amateur Radio");
2185MODULE_LICENSE("GPL");
2186module_init(scc_init_driver);
2187module_exit(scc_cleanup_driver);