blob: d80f71877d684fbddb46fb6f322dec3e7766b3a3 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#
2# USB Gadget support on a system involves
3# (a) a peripheral controller, and
4# (b) the gadget driver using it.
5#
6# NOTE: Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !!
7#
8# - Host systems (like PCs) need CONFIG_USB (with "A" jacks).
9# - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks).
10# - Some systems have both kinds of of controller.
11#
12# With help from a special transceiver and a "Mini-AB" jack, systems with
13# both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG).
14#
15menu "USB Gadget Support"
16
17config USB_GADGET
18 tristate "Support for USB Gadgets"
19 help
20 USB is a master/slave protocol, organized with one master
21 host (such as a PC) controlling up to 127 peripheral devices.
22 The USB hardware is asymmetric, which makes it easier to set up:
23 you can't connect a "to-the-host" connector to a peripheral.
24
25 Linux can run in the host, or in the peripheral. In both cases
26 you need a low level bus controller driver, and some software
27 talking to it. Peripheral controllers are often discrete silicon,
28 or are integrated with the CPU in a microcontroller. The more
29 familiar host side controllers have names like like "EHCI", "OHCI",
30 or "UHCI", and are usually integrated into southbridges on PC
31 motherboards.
32
33 Enable this configuration option if you want to run Linux inside
34 a USB peripheral device. Configure one hardware driver for your
35 peripheral/device side bus controller, and a "gadget driver" for
36 your peripheral protocol. (If you use modular gadget drivers,
37 you may configure more than one.)
38
39 If in doubt, say "N" and don't enable these drivers; most people
40 don't have this kind of hardware (except maybe inside Linux PDAs).
41
42 For more information, see <http://www.linux-usb.org/gadget> and
43 the kernel DocBook documentation for this API.
44
45config USB_GADGET_DEBUG_FILES
46 boolean "Debugging information files"
47 depends on USB_GADGET && PROC_FS
48 help
49 Some of the drivers in the "gadget" framework can expose
50 debugging information in files such as /proc/driver/udc
51 (for a peripheral controller). The information in these
52 files may help when you're troubleshooting or bringing up a
53 driver on a new board. Enable these files by choosing "Y"
54 here. If in doubt, or to conserve kernel memory, say "N".
55
David Brownell028b2712005-05-06 07:02:01 -070056config USB_GADGET_SELECTED
57 boolean
58
Linus Torvalds1da177e2005-04-16 15:20:36 -070059#
60# USB Peripheral Controller Support
61#
62choice
63 prompt "USB Peripheral Controller"
64 depends on USB_GADGET
65 help
66 A USB device uses a controller to talk to its host.
67 Systems should have only one such upstream link.
68 Many controller drivers are platform-specific; these
69 often need board-specific hooks.
70
71config USB_GADGET_NET2280
72 boolean "NetChip 2280"
73 depends on PCI
74 select USB_GADGET_DUALSPEED
75 help
76 NetChip 2280 is a PCI based USB peripheral controller which
77 supports both full and high speed USB 2.0 data transfers.
78
79 It has six configurable endpoints, as well as endpoint zero
80 (for control transfers) and several endpoints with dedicated
81 functions.
82
83 Say "y" to link the driver statically, or "m" to build a
84 dynamically linked module called "net2280" and force all
85 gadget drivers to also be dynamically linked.
86
87config USB_NET2280
88 tristate
89 depends on USB_GADGET_NET2280
90 default USB_GADGET
David Brownell028b2712005-05-06 07:02:01 -070091 select USB_GADGET_SELECTED
Linus Torvalds1da177e2005-04-16 15:20:36 -070092
93config USB_GADGET_PXA2XX
94 boolean "PXA 25x or IXP 4xx"
95 depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX
96 help
97 Intel's PXA 25x series XScale ARM-5TE processors include
98 an integrated full speed USB 1.1 device controller. The
99 controller in the IXP 4xx series is register-compatible.
100
101 It has fifteen fixed-function endpoints, as well as endpoint
102 zero (for control transfers).
103
104 Say "y" to link the driver statically, or "m" to build a
105 dynamically linked module called "pxa2xx_udc" and force all
106 gadget drivers to also be dynamically linked.
107
108config USB_PXA2XX
109 tristate
110 depends on USB_GADGET_PXA2XX
111 default USB_GADGET
David Brownell028b2712005-05-06 07:02:01 -0700112 select USB_GADGET_SELECTED
Linus Torvalds1da177e2005-04-16 15:20:36 -0700113
114# if there's only one gadget driver, using only two bulk endpoints,
115# don't waste memory for the other endpoints
116config USB_PXA2XX_SMALL
117 depends on USB_GADGET_PXA2XX
118 bool
119 default n if USB_ETH_RNDIS
120 default y if USB_ZERO
121 default y if USB_ETH
122 default y if USB_G_SERIAL
123
124config USB_GADGET_GOKU
125 boolean "Toshiba TC86C001 'Goku-S'"
126 depends on PCI
127 help
128 The Toshiba TC86C001 is a PCI device which includes controllers
129 for full speed USB devices, IDE, I2C, SIO, plus a USB host (OHCI).
130
131 The device controller has three configurable (bulk or interrupt)
132 endpoints, plus endpoint zero (for control transfers).
133
134 Say "y" to link the driver statically, or "m" to build a
135 dynamically linked module called "goku_udc" and to force all
136 gadget drivers to also be dynamically linked.
137
138config USB_GOKU
139 tristate
140 depends on USB_GADGET_GOKU
141 default USB_GADGET
David Brownell028b2712005-05-06 07:02:01 -0700142 select USB_GADGET_SELECTED
Linus Torvalds1da177e2005-04-16 15:20:36 -0700143
144
145config USB_GADGET_LH7A40X
146 boolean "LH7A40X"
147 depends on ARCH_LH7A40X
148 help
149 This driver provides USB Device Controller driver for LH7A40x
150
151config USB_LH7A40X
152 tristate
153 depends on USB_GADGET_LH7A40X
154 default USB_GADGET
David Brownell028b2712005-05-06 07:02:01 -0700155 select USB_GADGET_SELECTED
Linus Torvalds1da177e2005-04-16 15:20:36 -0700156
157
158config USB_GADGET_OMAP
159 boolean "OMAP USB Device Controller"
160 depends on ARCH_OMAP
161 select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
162 help
163 Many Texas Instruments OMAP processors have flexible full
164 speed USB device controllers, with support for up to 30
165 endpoints (plus endpoint zero). This driver supports the
166 controller in the OMAP 1611, and should work with controllers
167 in other OMAP processors too, given minor tweaks.
168
169 Say "y" to link the driver statically, or "m" to build a
170 dynamically linked module called "omap_udc" and force all
171 gadget drivers to also be dynamically linked.
172
173config USB_OMAP
174 tristate
175 depends on USB_GADGET_OMAP
176 default USB_GADGET
David Brownell028b2712005-05-06 07:02:01 -0700177 select USB_GADGET_SELECTED
Linus Torvalds1da177e2005-04-16 15:20:36 -0700178
179config USB_OTG
180 boolean "OTG Support"
181 depends on USB_GADGET_OMAP && ARCH_OMAP_OTG && USB_OHCI_HCD
182 help
183 The most notable feature of USB OTG is support for a
184 "Dual-Role" device, which can act as either a device
185 or a host. The initial role choice can be changed
186 later, when two dual-role devices talk to each other.
187
188 Select this only if your OMAP board has a Mini-AB connector.
189
David Brownellbae4bd82006-01-22 10:32:37 -0800190config USB_GADGET_AT91
191 boolean "AT91 USB Device Port"
192 depends on ARCH_AT91RM9200
193 select USB_GADGET_SELECTED
194 help
195 Many Atmel AT91 processors (such as the AT91RM2000) have a
196 full speed USB Device Port with support for five configurable
197 endpoints (plus endpoint zero).
198
199 Say "y" to link the driver statically, or "m" to build a
200 dynamically linked module called "at91_udc" and force all
201 gadget drivers to also be dynamically linked.
202
203config USB_AT91
204 tristate
205 depends on USB_GADGET_AT91
206 default USB_GADGET
Linus Torvalds1da177e2005-04-16 15:20:36 -0700207
208config USB_GADGET_DUMMY_HCD
209 boolean "Dummy HCD (DEVELOPMENT)"
210 depends on USB && EXPERIMENTAL
211 select USB_GADGET_DUALSPEED
212 help
213 This host controller driver emulates USB, looping all data transfer
214 requests back to a USB "gadget driver" in the same host. The host
215 side is the master; the gadget side is the slave. Gadget drivers
216 can be high, full, or low speed; and they have access to endpoints
217 like those from NET2280, PXA2xx, or SA1100 hardware.
218
219 This may help in some stages of creating a driver to embed in a
220 Linux device, since it lets you debug several parts of the gadget
221 driver without its hardware or drivers being involved.
222
223 Since such a gadget side driver needs to interoperate with a host
224 side Linux-USB device driver, this may help to debug both sides
225 of a USB protocol stack.
226
227 Say "y" to link the driver statically, or "m" to build a
228 dynamically linked module called "dummy_hcd" and force all
229 gadget drivers to also be dynamically linked.
230
231config USB_DUMMY_HCD
232 tristate
233 depends on USB_GADGET_DUMMY_HCD
234 default USB_GADGET
David Brownell028b2712005-05-06 07:02:01 -0700235 select USB_GADGET_SELECTED
Linus Torvalds1da177e2005-04-16 15:20:36 -0700236
237# NOTE: Please keep dummy_hcd LAST so that "real hardware" appears
238# first and will be selected by default.
239
240endchoice
241
242config USB_GADGET_DUALSPEED
243 bool
244 depends on USB_GADGET
245 default n
246 help
247 Means that gadget drivers should include extra descriptors
248 and code to handle dual-speed controllers.
249
250#
251# USB Gadget Drivers
252#
253choice
254 tristate "USB Gadget Drivers"
David Brownell028b2712005-05-06 07:02:01 -0700255 depends on USB_GADGET && USB_GADGET_SELECTED
Linus Torvalds1da177e2005-04-16 15:20:36 -0700256 default USB_ETH
257 help
258 A Linux "Gadget Driver" talks to the USB Peripheral Controller
259 driver through the abstract "gadget" API. Some other operating
260 systems call these "client" drivers, of which "class drivers"
261 are a subset (implementing a USB device class specification).
262 A gadget driver implements one or more USB functions using
263 the peripheral hardware.
264
265 Gadget drivers are hardware-neutral, or "platform independent",
266 except that they sometimes must understand quirks or limitations
267 of the particular controllers they work with. For example, when
268 a controller doesn't support alternate configurations or provide
269 enough of the right types of endpoints, the gadget driver might
270 not be able work with that controller, or might need to implement
271 a less common variant of a device class protocol.
272
273# this first set of drivers all depend on bulk-capable hardware.
274
275config USB_ZERO
276 tristate "Gadget Zero (DEVELOPMENT)"
277 depends on EXPERIMENTAL
278 help
279 Gadget Zero is a two-configuration device. It either sinks and
280 sources bulk data; or it loops back a configurable number of
281 transfers. It also implements control requests, for "chapter 9"
282 conformance. The driver needs only two bulk-capable endpoints, so
283 it can work on top of most device-side usb controllers. It's
284 useful for testing, and is also a working example showing how
285 USB "gadget drivers" can be written.
286
287 Make this be the first driver you try using on top of any new
288 USB peripheral controller driver. Then you can use host-side
289 test software, like the "usbtest" driver, to put your hardware
290 and its driver through a basic set of functional tests.
291
292 Gadget Zero also works with the host-side "usb-skeleton" driver,
293 and with many kinds of host-side test software. You may need
294 to tweak product and vendor IDs before host software knows about
295 this device, and arrange to select an appropriate configuration.
296
297 Say "y" to link the driver statically, or "m" to build a
298 dynamically linked module called "g_zero".
299
300config USB_ZERO_HNPTEST
301 boolean "HNP Test Device"
302 depends on USB_ZERO && USB_OTG
303 help
304 You can configure this device to enumerate using the device
305 identifiers of the USB-OTG test device. That means that when
306 this gadget connects to another OTG device, with this one using
307 the "B-Peripheral" role, that device will use HNP to let this
308 one serve as the USB host instead (in the "B-Host" role).
309
310config USB_ETH
311 tristate "Ethernet Gadget (with CDC Ethernet support)"
312 depends on NET
313 help
314 This driver implements Ethernet style communication, in either
315 of two ways:
316
317 - The "Communication Device Class" (CDC) Ethernet Control Model.
318 That protocol is often avoided with pure Ethernet adapters, in
319 favor of simpler vendor-specific hardware, but is widely
320 supported by firmware for smart network devices.
321
322 - On hardware can't implement that protocol, a simple CDC subset
323 is used, placing fewer demands on USB.
324
325 RNDIS support is a third option, more demanding than that subset.
326
327 Within the USB device, this gadget driver exposes a network device
328 "usbX", where X depends on what other networking devices you have.
329 Treat it like a two-node Ethernet link: host, and gadget.
330
331 The Linux-USB host-side "usbnet" driver interoperates with this
332 driver, so that deep I/O queues can be supported. On 2.4 kernels,
333 use "CDCEther" instead, if you're using the CDC option. That CDC
334 mode should also interoperate with standard CDC Ethernet class
335 drivers on other host operating systems.
336
337 Say "y" to link the driver statically, or "m" to build a
338 dynamically linked module called "g_ether".
339
340config USB_ETH_RNDIS
341 bool "RNDIS support (EXPERIMENTAL)"
342 depends on USB_ETH && EXPERIMENTAL
343 default y
344 help
345 Microsoft Windows XP bundles the "Remote NDIS" (RNDIS) protocol,
346 and Microsoft provides redistributable binary RNDIS drivers for
347 older versions of Windows.
348
349 If you say "y" here, the Ethernet gadget driver will try to provide
350 a second device configuration, supporting RNDIS to talk to such
351 Microsoft USB hosts.
352
353 To make MS-Windows work with this, use Documentation/usb/linux.inf
354 as the "driver info file". For versions of MS-Windows older than
355 XP, you'll need to download drivers from Microsoft's website; a URL
356 is given in comments found in that info file.
357
358config USB_GADGETFS
359 tristate "Gadget Filesystem (EXPERIMENTAL)"
360 depends on EXPERIMENTAL
361 help
362 This driver provides a filesystem based API that lets user mode
363 programs implement a single-configuration USB device, including
364 endpoint I/O and control requests that don't relate to enumeration.
365 All endpoints, transfer speeds, and transfer types supported by
366 the hardware are available, through read() and write() calls.
367
368 Say "y" to link the driver statically, or "m" to build a
369 dynamically linked module called "gadgetfs".
370
371config USB_FILE_STORAGE
372 tristate "File-backed Storage Gadget"
373 help
374 The File-backed Storage Gadget acts as a USB Mass Storage
375 disk drive. As its storage repository it can use a regular
376 file or a block device (in much the same way as the "loop"
377 device driver), specified as a module parameter.
378
379 Say "y" to link the driver statically, or "m" to build a
380 dynamically linked module called "g_file_storage".
381
382config USB_FILE_STORAGE_TEST
383 bool "File-backed Storage Gadget testing version"
384 depends on USB_FILE_STORAGE
385 default n
386 help
387 Say "y" to generate the larger testing version of the
388 File-backed Storage Gadget, useful for probing the
389 behavior of USB Mass Storage hosts. Not needed for
390 normal operation.
391
392config USB_G_SERIAL
393 tristate "Serial Gadget (with CDC ACM support)"
394 help
395 The Serial Gadget talks to the Linux-USB generic serial driver.
396 This driver supports a CDC-ACM module option, which can be used
397 to interoperate with MS-Windows hosts or with the Linux-USB
398 "cdc-acm" driver.
399
400 Say "y" to link the driver statically, or "m" to build a
401 dynamically linked module called "g_serial".
402
403 For more information, see Documentation/usb/gadget_serial.txt
404 which includes instructions and a "driver info file" needed to
405 make MS-Windows work with this driver.
406
407
408# put drivers that need isochronous transfer support (for audio
409# or video class gadget drivers), or specific hardware, here.
410
411# - none yet
412
413endchoice
414
415endmenu