blob: 52fea2e08db87358f0d1073dfba5e2bc555b323b [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * Emagic EMI 2|6 usb audio interface firmware loader.
3 * Copyright (C) 2002
4 * Tapio Laxström (tapio.laxstrom@iptime.fi)
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License, as published by
8 * the Free Software Foundation, version 2.
9 *
10 * $Id: emi62.c,v 1.15 2002/04/23 06:13:59 tapio Exp $
11 */
12#include <linux/kernel.h>
13#include <linux/errno.h>
14#include <linux/slab.h>
15#include <linux/init.h>
16#include <linux/module.h>
17#include <linux/usb.h>
18
19#define MAX_INTEL_HEX_RECORD_LENGTH 16
20typedef struct _INTEL_HEX_RECORD
21{
22 __u32 length;
23 __u32 address;
24 __u32 type;
25 __u8 data[MAX_INTEL_HEX_RECORD_LENGTH];
26} INTEL_HEX_RECORD, *PINTEL_HEX_RECORD;
27
28/* include firmware (variables)*/
29
30/* FIXME: This is quick and dirty solution! */
31#define SPDIF /* if you want SPDIF comment next line */
32//#undef SPDIF /* if you want MIDI uncomment this line */
33
34#ifdef SPDIF
35# include "emi62_fw_s.h" /* spdif fw */
36#else
37# include "emi62_fw_m.h" /* midi fw */
38#endif
39
40#define EMI62_VENDOR_ID 0x086a /* Emagic Soft-und Hardware GmBH */
41#define EMI62_PRODUCT_ID 0x0110 /* EMI 6|2m without firmware */
42
43#define ANCHOR_LOAD_INTERNAL 0xA0 /* Vendor specific request code for Anchor Upload/Download (This one is implemented in the core) */
44#define ANCHOR_LOAD_EXTERNAL 0xA3 /* This command is not implemented in the core. Requires firmware */
45#define ANCHOR_LOAD_FPGA 0xA5 /* This command is not implemented in the core. Requires firmware. Emagic extension */
46#define MAX_INTERNAL_ADDRESS 0x1B3F /* This is the highest internal RAM address for the AN2131Q */
47#define CPUCS_REG 0x7F92 /* EZ-USB Control and Status Register. Bit 0 controls 8051 reset */
48#define INTERNAL_RAM(address) (address <= MAX_INTERNAL_ADDRESS)
49
50static int emi62_writememory( struct usb_device *dev, int address, unsigned char *data, int length, __u8 bRequest);
51static int emi62_set_reset(struct usb_device *dev, unsigned char reset_bit);
52static int emi62_load_firmware (struct usb_device *dev);
53static int emi62_probe(struct usb_interface *intf, const struct usb_device_id *id);
54static void emi62_disconnect(struct usb_interface *intf);
55static int __init emi62_init (void);
56static void __exit emi62_exit (void);
57
58
59/* thanks to drivers/usb/serial/keyspan_pda.c code */
60static int emi62_writememory (struct usb_device *dev, int address, unsigned char *data, int length, __u8 request)
61{
62 int result;
63 unsigned char *buffer = kmalloc (length, GFP_KERNEL);
64
65 if (!buffer) {
66 err("emi62: kmalloc(%d) failed.", length);
67 return -ENOMEM;
68 }
69 memcpy (buffer, data, length);
70 /* Note: usb_control_msg returns negative value on error or length of the
71 * data that was written! */
72 result = usb_control_msg (dev, usb_sndctrlpipe(dev, 0), request, 0x40, address, 0, buffer, length, 300);
73 kfree (buffer);
74 return result;
75}
76
77/* thanks to drivers/usb/serial/keyspan_pda.c code */
78static int emi62_set_reset (struct usb_device *dev, unsigned char reset_bit)
79{
80 int response;
81 info("%s - %d", __FUNCTION__, reset_bit);
82
83 response = emi62_writememory (dev, CPUCS_REG, &reset_bit, 1, 0xa0);
84 if (response < 0) {
85 err("emi62: set_reset (%d) failed", reset_bit);
86 }
87 return response;
88}
89
90#define FW_LOAD_SIZE 1023
91
92static int emi62_load_firmware (struct usb_device *dev)
93{
94 int err;
95 int i;
96 int pos = 0; /* Position in hex record */
97 __u32 addr; /* Address to write */
98 __u8 *buf;
99
100 dev_dbg(&dev->dev, "load_firmware\n");
101 buf = kmalloc(FW_LOAD_SIZE, GFP_KERNEL);
102 if (!buf) {
103 err( "%s - error loading firmware: error = %d", __FUNCTION__, -ENOMEM);
104 err = -ENOMEM;
105 goto wraperr;
106 }
107
108 /* Assert reset (stop the CPU in the EMI) */
109 err = emi62_set_reset(dev,1);
110 if (err < 0) {
111 err("%s - error loading firmware: error = %d", __FUNCTION__, err);
112 goto wraperr;
113 }
114
115 /* 1. We need to put the loader for the FPGA into the EZ-USB */
116 for (i=0; g_emi62_loader[i].type == 0; i++) {
117 err = emi62_writememory(dev, g_emi62_loader[i].address, g_emi62_loader[i].data, g_emi62_loader[i].length, ANCHOR_LOAD_INTERNAL);
118 if (err < 0) {
119 err("%s - error loading firmware: error = %d", __FUNCTION__, err);
120 goto wraperr;
121 }
122 }
123
124 /* De-assert reset (let the CPU run) */
125 err = emi62_set_reset(dev,0);
126
127 /* 2. We upload the FPGA firmware into the EMI
128 * Note: collect up to 1023 (yes!) bytes and send them with
129 * a single request. This is _much_ faster! */
130 do {
131 i = 0;
132 addr = g_emi62bs[pos].address;
133
134 /* intel hex records are terminated with type 0 element */
135 while ((g_emi62bs[pos].type == 0) && (i + g_emi62bs[pos].length < FW_LOAD_SIZE)) {
136 memcpy(buf + i, g_emi62bs[pos].data, g_emi62bs[pos].length);
137 i += g_emi62bs[pos].length;
138 pos++;
139 }
140 err = emi62_writememory(dev, addr, buf, i, ANCHOR_LOAD_FPGA);
141 if (err < 0) {
142 err("%s - error loading firmware: error = %d", __FUNCTION__, err);
143 goto wraperr;
144 }
145 } while (i > 0);
146
147 /* Assert reset (stop the CPU in the EMI) */
148 err = emi62_set_reset(dev,1);
149 if (err < 0) {
150 err("%s - error loading firmware: error = %d", __FUNCTION__, err);
151 goto wraperr;
152 }
153
154 /* 3. We need to put the loader for the firmware into the EZ-USB (again...) */
155 for (i=0; g_emi62_loader[i].type == 0; i++) {
156 err = emi62_writememory(dev, g_emi62_loader[i].address, g_emi62_loader[i].data, g_emi62_loader[i].length, ANCHOR_LOAD_INTERNAL);
157 if (err < 0) {
158 err("%s - error loading firmware: error = %d", __FUNCTION__, err);
159 goto wraperr;
160 }
161 }
162
163 /* De-assert reset (let the CPU run) */
164 err = emi62_set_reset(dev,0);
165 if (err < 0) {
166 err("%s - error loading firmware: error = %d", __FUNCTION__, err);
167 goto wraperr;
168 }
169
170 /* 4. We put the part of the firmware that lies in the external RAM into the EZ-USB */
171
172/* FIXME: quick and dirty ifdefs */
173#ifdef SPDIF
174 for (i=0; g_HexSpdifFw62[i].type == 0; i++) {
175 if (!INTERNAL_RAM(g_HexSpdifFw62[i].address)) {
176 err = emi62_writememory(dev, g_HexSpdifFw62[i].address, g_HexSpdifFw62[i].data, g_HexSpdifFw62[i].length, ANCHOR_LOAD_EXTERNAL);
177 if (err < 0) {
178 err("%s - error loading firmware: error = %d", __FUNCTION__, err);
179 goto wraperr;
180 }
181 }
182 }
183#else /* MIDI */
184 for (i=0; g_HexMidiFw62[i].type == 0; i++) {
185 if (!INTERNAL_RAM(g_HexMidiFw62[i].address)) {
186 err = emi62_writememory(dev, g_HexMidiFw62[i].address, g_HexMidiFw62[i].data, g_HexMidiFw62[i].length, ANCHOR_LOAD_EXTERNAL);
187 if (err < 0) {
188 err("%s - error loading firmware: error = %d\n", __FUNCTION__, err);
189 goto wraperr;
190 return err;
191 }
192 }
193 }
194#endif
195 /* Assert reset (stop the CPU in the EMI) */
196 err = emi62_set_reset(dev,1);
197 if (err < 0) {
198 err("%s - error loading firmware: error = %d", __FUNCTION__, err);
199 goto wraperr;
200 }
201
202/* FIXME: quick and dirty ifdefs */
203#ifdef SPDIF
204 for (i=0; g_HexSpdifFw62[i].type == 0; i++) {
205 if (INTERNAL_RAM(g_HexSpdifFw62[i].address)) {
206 err = emi62_writememory(dev, g_HexSpdifFw62[i].address, g_HexSpdifFw62[i].data, g_HexSpdifFw62[i].length, ANCHOR_LOAD_INTERNAL);
207 if (err < 0) {
208 err("%s - error loading firmware: error = %d", __FUNCTION__, err);
209 goto wraperr;
210 }
211 }
212 }
213#else /* MIDI */
214 for (i=0; g_HexMidiFw62[i].type == 0; i++) {
215 if (INTERNAL_RAM(g_HexMidiFw62[i].address)) {
216 err = emi62_writememory(dev, g_HexMidiFw62[i].address, g_HexMidiFw62[i].data, g_HexMidiFw62[i].length, ANCHOR_LOAD_INTERNAL);
217 if (err < 0) {
218 err("%s - error loading firmware: error = %d\n", __FUNCTION__, err);
219 goto wraperr;
220 }
221 }
222 }
223#endif
224
225 /* De-assert reset (let the CPU run) */
226 err = emi62_set_reset(dev,0);
227 if (err < 0) {
228 err("%s - error loading firmware: error = %d", __FUNCTION__, err);
229 goto wraperr;
230 }
231
232 kfree(buf);
233
234 /* return 1 to fail the driver inialization
235 * and give real driver change to load */
236 return 1;
237
238wraperr:
239 kfree(buf);
240 dev_err(&dev->dev, "Error\n");
241 return err;
242}
243
244static __devinitdata struct usb_device_id id_table [] = {
245 { USB_DEVICE(EMI62_VENDOR_ID, EMI62_PRODUCT_ID) },
246 { } /* Terminating entry */
247};
248
249MODULE_DEVICE_TABLE (usb, id_table);
250
251static int emi62_probe(struct usb_interface *intf, const struct usb_device_id *id)
252{
253 struct usb_device *dev = interface_to_usbdev(intf);
254 dev_dbg(&intf->dev, "emi62_probe\n");
255
256 info("%s start", __FUNCTION__);
257
258 emi62_load_firmware(dev);
259
260 /* do not return the driver context, let real audio driver do that */
261 return -EIO;
262}
263
264static void emi62_disconnect(struct usb_interface *intf)
265{
266}
267
268static struct usb_driver emi62_driver = {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700269 .name = "emi62 - firmware loader",
270 .probe = emi62_probe,
271 .disconnect = emi62_disconnect,
272 .id_table = id_table,
273};
274
275static int __init emi62_init (void)
276{
277 int retval;
278 retval = usb_register (&emi62_driver);
279 if (retval)
280 printk(KERN_ERR "adi-emi: registration failed\n");
281 return retval;
282}
283
284static void __exit emi62_exit (void)
285{
286 usb_deregister (&emi62_driver);
287}
288
289module_init(emi62_init);
290module_exit(emi62_exit);
291
292MODULE_AUTHOR("tapio laxström");
293MODULE_DESCRIPTION("Emagic EMI 6|2m firmware loader.");
294MODULE_LICENSE("GPL");
295
296/* vi:ai:syntax=c:sw=8:ts=8:tw=80
297 */