blob: d83e8266a58e2eddf824696c80240ced024bab57 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * Cyrix MediaGX and NatSemi Geode Suspend Modulation
3 * (C) 2002 Zwane Mwaikambo <zwane@commfireservices.com>
4 * (C) 2002 Hiroshi Miura <miura@da-cha.org>
5 * All Rights Reserved
6 *
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License
Dave Jones32ee8c32006-02-28 00:43:23 -05009 * version 2 as published by the Free Software Foundation
Linus Torvalds1da177e2005-04-16 15:20:36 -070010 *
11 * The author(s) of this software shall not be held liable for damages
12 * of any nature resulting due to the use of this software. This
13 * software is provided AS-IS with no warranties.
Dave Jones32ee8c32006-02-28 00:43:23 -050014 *
Simon Arlott27b46d72007-10-20 01:13:56 +020015 * Theoretical note:
Linus Torvalds1da177e2005-04-16 15:20:36 -070016 *
17 * (see Geode(tm) CS5530 manual (rev.4.1) page.56)
18 *
19 * CPU frequency control on NatSemi Geode GX1/GXLV processor and CS55x0
Simon Arlott27b46d72007-10-20 01:13:56 +020020 * are based on Suspend Modulation.
Linus Torvalds1da177e2005-04-16 15:20:36 -070021 *
22 * Suspend Modulation works by asserting and de-asserting the SUSP# pin
23 * to CPU(GX1/GXLV) for configurable durations. When asserting SUSP#
Dave Jones32ee8c32006-02-28 00:43:23 -050024 * the CPU enters an idle state. GX1 stops its core clock when SUSP# is
Linus Torvalds1da177e2005-04-16 15:20:36 -070025 * asserted then power consumption is reduced.
26 *
Dave Jones32ee8c32006-02-28 00:43:23 -050027 * Suspend Modulation's OFF/ON duration are configurable
Linus Torvalds1da177e2005-04-16 15:20:36 -070028 * with 'Suspend Modulation OFF Count Register'
29 * and 'Suspend Modulation ON Count Register'.
Dave Jones32ee8c32006-02-28 00:43:23 -050030 * These registers are 8bit counters that represent the number of
Linus Torvalds1da177e2005-04-16 15:20:36 -070031 * 32us intervals which the SUSP# pin is asserted(ON)/de-asserted(OFF)
32 * to the processor.
33 *
Dave Jones32ee8c32006-02-28 00:43:23 -050034 * These counters define a ratio which is the effective frequency
35 * of operation of the system.
Linus Torvalds1da177e2005-04-16 15:20:36 -070036 *
37 * OFF Count
38 * F_eff = Fgx * ----------------------
39 * OFF Count + ON Count
40 *
41 * 0 <= On Count, Off Count <= 255
42 *
Dave Jones32ee8c32006-02-28 00:43:23 -050043 * From these limits, we can get register values
Linus Torvalds1da177e2005-04-16 15:20:36 -070044 *
45 * off_duration + on_duration <= MAX_DURATION
46 * on_duration = off_duration * (stock_freq - freq) / freq
47 *
Dave Jones32ee8c32006-02-28 00:43:23 -050048 * off_duration = (freq * DURATION) / stock_freq
49 * on_duration = DURATION - off_duration
Linus Torvalds1da177e2005-04-16 15:20:36 -070050 *
51 *
52 *---------------------------------------------------------------------------
53 *
54 * ChangeLog:
Dave Jones32ee8c32006-02-28 00:43:23 -050055 * Dec. 12, 2003 Hiroshi Miura <miura@da-cha.org>
56 * - fix on/off register mistake
57 * - fix cpu_khz calc when it stops cpu modulation.
Linus Torvalds1da177e2005-04-16 15:20:36 -070058 *
Dave Jones32ee8c32006-02-28 00:43:23 -050059 * Dec. 11, 2002 Hiroshi Miura <miura@da-cha.org>
60 * - rewrite for Cyrix MediaGX Cx5510/5520 and
Linus Torvalds1da177e2005-04-16 15:20:36 -070061 * NatSemi Geode Cs5530(A).
62 *
63 * Jul. ??, 2002 Zwane Mwaikambo <zwane@commfireservices.com>
64 * - cs5530_mod patch for 2.4.19-rc1.
65 *
66 *---------------------------------------------------------------------------
67 *
68 * Todo
69 * Test on machines with 5510, 5530, 5530A
70 */
71
72/************************************************************************
73 * Suspend Modulation - Definitions *
74 ************************************************************************/
75
76#include <linux/kernel.h>
Dave Jones32ee8c32006-02-28 00:43:23 -050077#include <linux/module.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070078#include <linux/init.h>
79#include <linux/smp.h>
80#include <linux/cpufreq.h>
81#include <linux/pci.h>
Dave Jones00f6a232009-01-17 23:06:57 -050082#include <linux/errno.h>
Tejun Heo5a0e3ad2010-03-24 17:04:11 +090083#include <linux/slab.h>
Dave Jones00f6a232009-01-17 23:06:57 -050084
Andi Kleenfa8031a2012-01-26 00:09:12 +010085#include <asm/cpu_device_id.h>
Juergen Beisertf25f64e2007-07-22 11:12:38 +020086#include <asm/processor-cyrix.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070087
88/* PCI config registers, all at F0 */
Dave Jones32ee8c32006-02-28 00:43:23 -050089#define PCI_PMER1 0x80 /* power management enable register 1 */
90#define PCI_PMER2 0x81 /* power management enable register 2 */
91#define PCI_PMER3 0x82 /* power management enable register 3 */
92#define PCI_IRQTC 0x8c /* irq speedup timer counter register:typical 2 to 4ms */
93#define PCI_VIDTC 0x8d /* video speedup timer counter register: typical 50 to 100ms */
94#define PCI_MODOFF 0x94 /* suspend modulation OFF counter register, 1 = 32us */
95#define PCI_MODON 0x95 /* suspend modulation ON counter register */
96#define PCI_SUSCFG 0x96 /* suspend configuration register */
Linus Torvalds1da177e2005-04-16 15:20:36 -070097
98/* PMER1 bits */
Dave Jones32ee8c32006-02-28 00:43:23 -050099#define GPM (1<<0) /* global power management */
100#define GIT (1<<1) /* globally enable PM device idle timers */
101#define GTR (1<<2) /* globally enable IO traps */
102#define IRQ_SPDUP (1<<3) /* disable clock throttle during interrupt handling */
103#define VID_SPDUP (1<<4) /* disable clock throttle during vga video handling */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700104
105/* SUSCFG bits */
Dave Jones32ee8c32006-02-28 00:43:23 -0500106#define SUSMOD (1<<0) /* enable/disable suspend modulation */
Simon Arlott27b46d72007-10-20 01:13:56 +0200107/* the below is supported only with cs5530 (after rev.1.2)/cs5530A */
Dave Jones32ee8c32006-02-28 00:43:23 -0500108#define SMISPDUP (1<<1) /* select how SMI re-enable suspend modulation: */
109 /* IRQTC timer or read SMI speedup disable reg.(F1BAR[08-09h]) */
110#define SUSCFG (1<<2) /* enable powering down a GXLV processor. "Special 3Volt Suspend" mode */
Simon Arlott27b46d72007-10-20 01:13:56 +0200111/* the below is supported only with cs5530A */
Dave Jones32ee8c32006-02-28 00:43:23 -0500112#define PWRSVE_ISA (1<<3) /* stop ISA clock */
113#define PWRSVE (1<<4) /* active idle */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700114
115struct gxfreq_params {
116 u8 on_duration;
117 u8 off_duration;
118 u8 pci_suscfg;
119 u8 pci_pmer1;
120 u8 pci_pmer2;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700121 struct pci_dev *cs55x0;
122};
123
124static struct gxfreq_params *gx_params;
125static int stock_freq;
126
127/* PCI bus clock - defaults to 30.000 if cpu_khz is not available */
Dave Jones00f6a232009-01-17 23:06:57 -0500128static int pci_busclk;
129module_param(pci_busclk, int, 0444);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700130
131/* maximum duration for which the cpu may be suspended
132 * (32us * MAX_DURATION). If no parameter is given, this defaults
Dave Jones32ee8c32006-02-28 00:43:23 -0500133 * to 255.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700134 * Note that this leads to a maximum of 8 ms(!) where the CPU clock
135 * is suspended -- processing power is just 0.39% of what it used to be,
136 * though. 781.25 kHz(!) for a 200 MHz processor -- wow. */
137static int max_duration = 255;
Dave Jones00f6a232009-01-17 23:06:57 -0500138module_param(max_duration, int, 0444);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700139
140/* For the default policy, we want at least some processing power
141 * - let's say 5%. (min = maxfreq / POLICY_MIN_DIV)
142 */
143#define POLICY_MIN_DIV 20
144
145
Linus Torvalds1da177e2005-04-16 15:20:36 -0700146/**
Dave Jones32ee8c32006-02-28 00:43:23 -0500147 * we can detect a core multipiler from dir0_lsb
148 * from GX1 datasheet p.56,
149 * MULT[3:0]:
150 * 0000 = SYSCLK multiplied by 4 (test only)
151 * 0001 = SYSCLK multiplied by 10
152 * 0010 = SYSCLK multiplied by 4
153 * 0011 = SYSCLK multiplied by 6
154 * 0100 = SYSCLK multiplied by 9
155 * 0101 = SYSCLK multiplied by 5
156 * 0110 = SYSCLK multiplied by 7
157 * 0111 = SYSCLK multiplied by 8
Linus Torvalds1da177e2005-04-16 15:20:36 -0700158 * of 33.3MHz
159 **/
160static int gx_freq_mult[16] = {
161 4, 10, 4, 6, 9, 5, 7, 8,
162 0, 0, 0, 0, 0, 0, 0, 0
163};
164
165
166/****************************************************************
Dave Jones32ee8c32006-02-28 00:43:23 -0500167 * Low Level chipset interface *
Linus Torvalds1da177e2005-04-16 15:20:36 -0700168 ****************************************************************/
169static struct pci_device_id gx_chipset_tbl[] __initdata = {
Peter Huewe55c789b2010-07-15 20:36:41 +0200170 { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY), },
171 { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5520), },
172 { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5510), },
Dave Jones32ee8c32006-02-28 00:43:23 -0500173 { 0, },
Linus Torvalds1da177e2005-04-16 15:20:36 -0700174};
Alan Coxb3012e12012-01-30 14:47:28 +0000175MODULE_DEVICE_TABLE(pci, gx_chipset_tbl);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700176
Dave Jones00f6a232009-01-17 23:06:57 -0500177static void gx_write_byte(int reg, int value)
178{
179 pci_write_config_byte(gx_params->cs55x0, reg, value);
180}
181
Linus Torvalds1da177e2005-04-16 15:20:36 -0700182/**
Dave Jones32ee8c32006-02-28 00:43:23 -0500183 * gx_detect_chipset:
Linus Torvalds1da177e2005-04-16 15:20:36 -0700184 *
185 **/
Hanjun Guoaf973852013-08-13 18:20:08 +0800186static struct pci_dev * __init gx_detect_chipset(void)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700187{
188 struct pci_dev *gx_pci = NULL;
189
Linus Torvalds1da177e2005-04-16 15:20:36 -0700190 /* detect which companion chip is used */
Kulikov Vasiliyccc56382010-07-03 20:03:55 +0400191 for_each_pci_dev(gx_pci) {
Dave Jones32ee8c32006-02-28 00:43:23 -0500192 if ((pci_match_id(gx_chipset_tbl, gx_pci)) != NULL)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700193 return gx_pci;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700194 }
195
Dominik Brodowski2d06d8c2011-03-27 15:04:46 +0200196 pr_debug("error: no supported chipset found!\n");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700197 return NULL;
198}
199
200/**
Dave Jones32ee8c32006-02-28 00:43:23 -0500201 * gx_get_cpuspeed:
Linus Torvalds1da177e2005-04-16 15:20:36 -0700202 *
Dave Jones00f6a232009-01-17 23:06:57 -0500203 * Finds out at which efficient frequency the Cyrix MediaGX/NatSemi
204 * Geode CPU runs.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700205 */
206static unsigned int gx_get_cpuspeed(unsigned int cpu)
207{
Dave Jones32ee8c32006-02-28 00:43:23 -0500208 if ((gx_params->pci_suscfg & SUSMOD) == 0)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700209 return stock_freq;
210
Dave Jones32ee8c32006-02-28 00:43:23 -0500211 return (stock_freq * gx_params->off_duration)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700212 / (gx_params->on_duration + gx_params->off_duration);
213}
214
215/**
216 * gx_validate_speed:
217 * determine current cpu speed
Dave Jones32ee8c32006-02-28 00:43:23 -0500218 *
219 **/
Linus Torvalds1da177e2005-04-16 15:20:36 -0700220
Dave Jones00f6a232009-01-17 23:06:57 -0500221static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration,
222 u8 *off_duration)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700223{
224 unsigned int i;
225 u8 tmp_on, tmp_off;
226 int old_tmp_freq = stock_freq;
227 int tmp_freq;
228
Dave Jones00f6a232009-01-17 23:06:57 -0500229 *off_duration = 1;
230 *on_duration = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700231
Dave Jones00f6a232009-01-17 23:06:57 -0500232 for (i = max_duration; i > 0; i--) {
Dave Jones32ee8c32006-02-28 00:43:23 -0500233 tmp_off = ((khz * i) / stock_freq) & 0xff;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700234 tmp_on = i - tmp_off;
235 tmp_freq = (stock_freq * tmp_off) / i;
236 /* if this relation is closer to khz, use this. If it's equal,
237 * prefer it, too - lower latency */
238 if (abs(tmp_freq - khz) <= abs(old_tmp_freq - khz)) {
239 *on_duration = tmp_on;
240 *off_duration = tmp_off;
241 old_tmp_freq = tmp_freq;
242 }
243 }
244
245 return old_tmp_freq;
246}
247
248
249/**
Dave Jones32ee8c32006-02-28 00:43:23 -0500250 * gx_set_cpuspeed:
251 * set cpu speed in khz.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700252 **/
253
Viresh Kumarb43a7ff2013-03-24 11:56:43 +0530254static void gx_set_cpuspeed(struct cpufreq_policy *policy, unsigned int khz)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700255{
Dave Jones32ee8c32006-02-28 00:43:23 -0500256 u8 suscfg, pmer1;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700257 unsigned int new_khz;
258 unsigned long flags;
259 struct cpufreq_freqs freqs;
260
Linus Torvalds1da177e2005-04-16 15:20:36 -0700261 freqs.old = gx_get_cpuspeed(0);
262
Dave Jones00f6a232009-01-17 23:06:57 -0500263 new_khz = gx_validate_speed(khz, &gx_params->on_duration,
264 &gx_params->off_duration);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700265
266 freqs.new = new_khz;
267
Viresh Kumarb43a7ff2013-03-24 11:56:43 +0530268 cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700269 local_irq_save(flags);
270
Dave Jones00f6a232009-01-17 23:06:57 -0500271 if (new_khz != stock_freq) {
272 /* if new khz == 100% of CPU speed, it is special case */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700273 switch (gx_params->cs55x0->device) {
274 case PCI_DEVICE_ID_CYRIX_5530_LEGACY:
275 pmer1 = gx_params->pci_pmer1 | IRQ_SPDUP | VID_SPDUP;
276 /* FIXME: need to test other values -- Zwane,Miura */
Dave Jones00f6a232009-01-17 23:06:57 -0500277 /* typical 2 to 4ms */
278 gx_write_byte(PCI_IRQTC, 4);
279 /* typical 50 to 100ms */
280 gx_write_byte(PCI_VIDTC, 100);
281 gx_write_byte(PCI_PMER1, pmer1);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700282
Dave Jones00f6a232009-01-17 23:06:57 -0500283 if (gx_params->cs55x0->revision < 0x10) {
284 /* CS5530(rev 1.2, 1.3) */
285 suscfg = gx_params->pci_suscfg|SUSMOD;
286 } else {
287 /* CS5530A,B.. */
288 suscfg = gx_params->pci_suscfg|SUSMOD|PWRSVE;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700289 }
290 break;
291 case PCI_DEVICE_ID_CYRIX_5520:
292 case PCI_DEVICE_ID_CYRIX_5510:
293 suscfg = gx_params->pci_suscfg | SUSMOD;
294 break;
295 default:
296 local_irq_restore(flags);
Dominik Brodowski2d06d8c2011-03-27 15:04:46 +0200297 pr_debug("fatal: try to set unknown chipset.\n");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700298 return;
299 }
300 } else {
301 suscfg = gx_params->pci_suscfg & ~(SUSMOD);
302 gx_params->off_duration = 0;
303 gx_params->on_duration = 0;
Dominik Brodowski2d06d8c2011-03-27 15:04:46 +0200304 pr_debug("suspend modulation disabled: cpu runs 100%% speed.\n");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700305 }
306
Dave Jones00f6a232009-01-17 23:06:57 -0500307 gx_write_byte(PCI_MODOFF, gx_params->off_duration);
308 gx_write_byte(PCI_MODON, gx_params->on_duration);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700309
Dave Jones00f6a232009-01-17 23:06:57 -0500310 gx_write_byte(PCI_SUSCFG, suscfg);
Dave Jones32ee8c32006-02-28 00:43:23 -0500311 pci_read_config_byte(gx_params->cs55x0, PCI_SUSCFG, &suscfg);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700312
Dave Jones32ee8c32006-02-28 00:43:23 -0500313 local_irq_restore(flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700314
315 gx_params->pci_suscfg = suscfg;
316
Viresh Kumarb43a7ff2013-03-24 11:56:43 +0530317 cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700318
Dominik Brodowski2d06d8c2011-03-27 15:04:46 +0200319 pr_debug("suspend modulation w/ duration of ON:%d us, OFF:%d us\n",
Dave Jones32ee8c32006-02-28 00:43:23 -0500320 gx_params->on_duration * 32, gx_params->off_duration * 32);
Dominik Brodowski2d06d8c2011-03-27 15:04:46 +0200321 pr_debug("suspend modulation w/ clock speed: %d kHz.\n", freqs.new);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700322}
323
324/****************************************************************
325 * High level functions *
326 ****************************************************************/
327
328/*
Dave Jones32ee8c32006-02-28 00:43:23 -0500329 * cpufreq_gx_verify: test if frequency range is valid
Linus Torvalds1da177e2005-04-16 15:20:36 -0700330 *
Dave Jones32ee8c32006-02-28 00:43:23 -0500331 * This function checks if a given frequency range in kHz is valid
332 * for the hardware supported by the driver.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700333 */
334
335static int cpufreq_gx_verify(struct cpufreq_policy *policy)
336{
337 unsigned int tmp_freq = 0;
338 u8 tmp1, tmp2;
339
Dave Jones32ee8c32006-02-28 00:43:23 -0500340 if (!stock_freq || !policy)
341 return -EINVAL;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700342
343 policy->cpu = 0;
Dave Jones00f6a232009-01-17 23:06:57 -0500344 cpufreq_verify_within_limits(policy, (stock_freq / max_duration),
345 stock_freq);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700346
347 /* it needs to be assured that at least one supported frequency is
348 * within policy->min and policy->max. If it is not, policy->max
349 * needs to be increased until one freuqency is supported.
Dave Jones32ee8c32006-02-28 00:43:23 -0500350 * policy->min may not be decreased, though. This way we guarantee a
Linus Torvalds1da177e2005-04-16 15:20:36 -0700351 * specific processing capacity.
352 */
353 tmp_freq = gx_validate_speed(policy->min, &tmp1, &tmp2);
Dave Jones32ee8c32006-02-28 00:43:23 -0500354 if (tmp_freq < policy->min)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700355 tmp_freq += stock_freq / max_duration;
356 policy->min = tmp_freq;
Dave Jones32ee8c32006-02-28 00:43:23 -0500357 if (policy->min > policy->max)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700358 policy->max = tmp_freq;
359 tmp_freq = gx_validate_speed(policy->max, &tmp1, &tmp2);
360 if (tmp_freq > policy->max)
361 tmp_freq -= stock_freq / max_duration;
362 policy->max = tmp_freq;
363 if (policy->max < policy->min)
364 policy->max = policy->min;
Dave Jones00f6a232009-01-17 23:06:57 -0500365 cpufreq_verify_within_limits(policy, (stock_freq / max_duration),
366 stock_freq);
Dave Jones32ee8c32006-02-28 00:43:23 -0500367
Linus Torvalds1da177e2005-04-16 15:20:36 -0700368 return 0;
369}
370
371/*
Dave Jones32ee8c32006-02-28 00:43:23 -0500372 * cpufreq_gx_target:
Linus Torvalds1da177e2005-04-16 15:20:36 -0700373 *
374 */
375static int cpufreq_gx_target(struct cpufreq_policy *policy,
376 unsigned int target_freq,
377 unsigned int relation)
378{
379 u8 tmp1, tmp2;
380 unsigned int tmp_freq;
381
Dave Jones32ee8c32006-02-28 00:43:23 -0500382 if (!stock_freq || !policy)
383 return -EINVAL;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700384
385 policy->cpu = 0;
386
387 tmp_freq = gx_validate_speed(target_freq, &tmp1, &tmp2);
388 while (tmp_freq < policy->min) {
389 tmp_freq += stock_freq / max_duration;
390 tmp_freq = gx_validate_speed(tmp_freq, &tmp1, &tmp2);
391 }
392 while (tmp_freq > policy->max) {
393 tmp_freq -= stock_freq / max_duration;
394 tmp_freq = gx_validate_speed(tmp_freq, &tmp1, &tmp2);
395 }
396
Viresh Kumarb43a7ff2013-03-24 11:56:43 +0530397 gx_set_cpuspeed(policy, tmp_freq);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700398
399 return 0;
400}
401
402static int cpufreq_gx_cpu_init(struct cpufreq_policy *policy)
403{
Viresh Kumarcd590642013-10-03 20:28:43 +0530404 unsigned int maxfreq;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700405
406 if (!policy || policy->cpu != 0)
407 return -ENODEV;
408
409 /* determine maximum frequency */
Dave Jones00f6a232009-01-17 23:06:57 -0500410 if (pci_busclk)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700411 maxfreq = pci_busclk * gx_freq_mult[getCx86(CX86_DIR1) & 0x0f];
Dave Jones00f6a232009-01-17 23:06:57 -0500412 else if (cpu_khz)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700413 maxfreq = cpu_khz;
Dave Jones00f6a232009-01-17 23:06:57 -0500414 else
Linus Torvalds1da177e2005-04-16 15:20:36 -0700415 maxfreq = 30000 * gx_freq_mult[getCx86(CX86_DIR1) & 0x0f];
Dave Jones00f6a232009-01-17 23:06:57 -0500416
Linus Torvalds1da177e2005-04-16 15:20:36 -0700417 stock_freq = maxfreq;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700418
Dominik Brodowski2d06d8c2011-03-27 15:04:46 +0200419 pr_debug("cpu max frequency is %d.\n", maxfreq);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700420
421 /* setup basic struct for cpufreq API */
422 policy->cpu = 0;
423
424 if (max_duration < POLICY_MIN_DIV)
425 policy->min = maxfreq / max_duration;
426 else
427 policy->min = maxfreq / POLICY_MIN_DIV;
428 policy->max = maxfreq;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700429 policy->cpuinfo.min_freq = maxfreq / max_duration;
430 policy->cpuinfo.max_freq = maxfreq;
431 policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
432
433 return 0;
434}
435
Dave Jones32ee8c32006-02-28 00:43:23 -0500436/*
Linus Torvalds1da177e2005-04-16 15:20:36 -0700437 * cpufreq_gx_init:
438 * MediaGX/Geode GX initialize cpufreq driver
439 */
Linus Torvalds221dee22007-02-26 14:55:48 -0800440static struct cpufreq_driver gx_suspmod_driver = {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700441 .get = gx_get_cpuspeed,
442 .verify = cpufreq_gx_verify,
443 .target = cpufreq_gx_target,
444 .init = cpufreq_gx_cpu_init,
445 .name = "gx-suspmod",
Linus Torvalds1da177e2005-04-16 15:20:36 -0700446};
447
448static int __init cpufreq_gx_init(void)
449{
450 int ret;
451 struct gxfreq_params *params;
452 struct pci_dev *gx_pci;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700453
454 /* Test if we have the right hardware */
Dave Jones00f6a232009-01-17 23:06:57 -0500455 gx_pci = gx_detect_chipset();
456 if (gx_pci == NULL)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700457 return -ENODEV;
458
459 /* check whether module parameters are sane */
460 if (max_duration > 0xff)
461 max_duration = 0xff;
462
Dominik Brodowski2d06d8c2011-03-27 15:04:46 +0200463 pr_debug("geode suspend modulation available.\n");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700464
Viresh Kumard5b73cd2013-08-06 22:53:06 +0530465 params = kzalloc(sizeof(*params), GFP_KERNEL);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700466 if (params == NULL)
467 return -ENOMEM;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700468
469 params->cs55x0 = gx_pci;
470 gx_params = params;
471
472 /* keep cs55x0 configurations */
473 pci_read_config_byte(params->cs55x0, PCI_SUSCFG, &(params->pci_suscfg));
474 pci_read_config_byte(params->cs55x0, PCI_PMER1, &(params->pci_pmer1));
475 pci_read_config_byte(params->cs55x0, PCI_PMER2, &(params->pci_pmer2));
476 pci_read_config_byte(params->cs55x0, PCI_MODON, &(params->on_duration));
Dave Jones00f6a232009-01-17 23:06:57 -0500477 pci_read_config_byte(params->cs55x0, PCI_MODOFF,
478 &(params->off_duration));
Linus Torvalds1da177e2005-04-16 15:20:36 -0700479
Dave Jones00f6a232009-01-17 23:06:57 -0500480 ret = cpufreq_register_driver(&gx_suspmod_driver);
481 if (ret) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700482 kfree(params);
483 return ret; /* register error! */
484 }
485
486 return 0;
487}
488
489static void __exit cpufreq_gx_exit(void)
490{
491 cpufreq_unregister_driver(&gx_suspmod_driver);
492 pci_dev_put(gx_params->cs55x0);
493 kfree(gx_params);
494}
495
Dave Jones00f6a232009-01-17 23:06:57 -0500496MODULE_AUTHOR("Hiroshi Miura <miura@da-cha.org>");
497MODULE_DESCRIPTION("Cpufreq driver for Cyrix MediaGX and NatSemi Geode");
498MODULE_LICENSE("GPL");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700499
500module_init(cpufreq_gx_init);
501module_exit(cpufreq_gx_exit);
502