blob: afb31c141d9d281a3a5b406cffb29220961d02cc [file] [log] [blame]
Pete Popov26a940e2005-09-15 08:03:12 +00001README for MIPS AU1XXX IDE driver - Released 2005-07-15
2
3ABOUT
4-----
5This file describes the 'drivers/ide/mips/au1xxx-ide.c', related files and the
6services they provide.
7
8If you are short in patience and just want to know how to add your hard disc to
9the white or black list, go to the 'ADD NEW HARD DISC TO WHITE OR BLACK LIST'
10section.
11
12
13LICENSE
14-------
15
16Copyright (c) 2003-2005 AMD, Personal Connectivity Solutions
17
18This program is free software; you can redistribute it and/or modify it under
19the terms of the GNU General Public License as published by the Free Software
20Foundation; either version 2 of the License, or (at your option) any later
21version.
22
23THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
24INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
25FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
26BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
27CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
28SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
29INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
30CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
31ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
32POSSIBILITY OF SUCH DAMAGE.
33
34You should have received a copy of the GNU General Public License along with
35this program; if not, write to the Free Software Foundation, Inc.,
36675 Mass Ave, Cambridge, MA 02139, USA.
37
38Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE
39 Interface and Linux Device Driver" Application Note.
40
41
42FILES, CONFIGS AND COMPATABILITY
43--------------------------------
44
45Two files are introduced:
46
47 a) 'include/asm-mips/mach-au1x00/au1xxx_ide.h'
48 containes : struct _auide_hwif
49 struct drive_list_entry dma_white_list
50 struct drive_list_entry dma_black_list
51 timing parameters for PIO mode 0/1/2/3/4
52 timing parameters for MWDMA 0/1/2
53
54 b) 'drivers/ide/mips/au1xxx-ide.c'
55 contains the functionality of the AU1XXX IDE driver
56
57Four configs variables are introduced:
58
59 CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA - enable the PIO+DBDMA mode
60 CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA - enable the MWDMA mode
61 CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON - set Burstable FIFO in DBDMA
62 controler
63 CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ - maximum transfer size
64 per descriptor
65
66If MWDMA is enabled and the connected hard disc is not on the white list, the
67kernel switches to a "safe mwdma mode" at boot time. In this mode the IDE
68performance is substantial slower then in full speed mwdma. In this case
69please add your hard disc to the white list (follow instruction from 'ADD NEW
70HARD DISC TO WHITE OR BLACK LIST' section).
71
72
73SUPPORTED IDE MODES
74-------------------
75
76The AU1XXX IDE driver supported all PIO modes - PIO mode 0/1/2/3/4 - and all
77MWDMA modes - MWDMA 0/1/2 -. There is no support for SWDMA and UDMA mode.
78
79To change the PIO mode use the program hdparm with option -p, e.g.
80'hdparm -p0 [device]' for PIO mode 0. To enable the MWDMA mode use the option
81-X, e.g. 'hdparm -X32 [device]' for MWDMA mode 0.
82
83
84PERFORMANCE CONFIGURATIONS
85--------------------------
86
87If the used system doesn't need USB support enable the following kernel configs:
88
89CONFIG_IDE=y
90CONFIG_BLK_DEV_IDE=y
91CONFIG_IDE_GENERIC=y
92CONFIG_BLK_DEV_IDEPCI=y
93CONFIG_BLK_DEV_GENERIC=y
94CONFIG_BLK_DEV_IDEDMA_PCI=y
95CONFIG_IDEDMA_PCI_AUTO=y
96CONFIG_BLK_DEV_IDE_AU1XXX=y
97CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y
Pete Popov26a940e2005-09-15 08:03:12 +000098CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ=128
99CONFIG_BLK_DEV_IDEDMA=y
100CONFIG_IDEDMA_AUTO=y
101
Ralf Baechlea3c9dc32006-02-14 19:13:23 +0000102Also define 'IDE_AU1XXX_BURSTMODE' in 'drivers/ide/mips/au1xxx-ide.c' to enable
103the burst support on DBDMA controller.
104
Pete Popov26a940e2005-09-15 08:03:12 +0000105If the used system need the USB support enable the following kernel configs for
106high IDE to USB throughput.
107
108CONFIG_BLK_DEV_IDEDISK=y
109CONFIG_IDE_GENERIC=y
110CONFIG_BLK_DEV_IDEPCI=y
111CONFIG_BLK_DEV_GENERIC=y
112CONFIG_BLK_DEV_IDEDMA_PCI=y
113CONFIG_IDEDMA_PCI_AUTO=y
114CONFIG_BLK_DEV_IDE_AU1XXX=y
115CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y
116CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ=128
117CONFIG_BLK_DEV_IDEDMA=y
118CONFIG_IDEDMA_AUTO=y
119
Ralf Baechlea3c9dc32006-02-14 19:13:23 +0000120Also undefine 'IDE_AU1XXX_BURSTMODE' in 'drivers/ide/mips/au1xxx-ide.c' to
121disable the burst support on DBDMA controller.
Pete Popov26a940e2005-09-15 08:03:12 +0000122
123ADD NEW HARD DISC TO WHITE OR BLACK LIST
124----------------------------------------
125
126Step 1 : detect the model name of your hard disc
127
128 a) connect your hard disc to the AU1XXX
129
130 b) boot your kernel and get the hard disc model.
131
132 Example boot log:
133
134 --snipped--
135 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
136 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
137 Au1xxx IDE(builtin) configured for MWDMA2
138 Probing IDE interface ide0...
139 hda: Maxtor 6E040L0, ATA DISK drive
140 ide0 at 0xac800000-0xac800007,0xac8001c0 on irq 64
141 hda: max request size: 64KiB
142 hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, (U)DMA
143 --snipped--
144
145 In this example 'Maxtor 6E040L0'.
146
147Step 2 : edit 'include/asm-mips/mach-au1x00/au1xxx_ide.h'
148
149 Add your hard disc to the dma_white_list or dma_black_list structur.
150
151Step 3 : Recompile the kernel
152
153 Enable MWDMA support in the kernel configuration. Recompile the kernel and
154 reboot.
155
156Step 4 : Tests
157
158 If you have add a hard disc to the white list, please run some stress tests
159 for verification.
160
161
162ACKNOWLEDGMENTS
163---------------
164
165These drivers wouldn't have been done without the base of kernel 2.4.x AU1XXX
166IDE driver from AMD.
167
168Additional input also from:
169Matthias Lenk <matthias.lenk@amd.com>
170
171Happy hacking!
172Enrico Walther <enrico.walther@amd.com>