blob: e80da955e6876aeb550bec75d3d99643020034eb [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#
2# Security configuration
3#
4
5menu "Security options"
6
7config KEYS
8 bool "Enable access key retention support"
9 help
10 This option provides support for retaining authentication tokens and
11 access keys in the kernel.
12
13 It also includes provision of methods by which such keys might be
14 associated with a process so that network filesystems, encryption
15 support and the like can find them.
16
17 Furthermore, a special type of key is available that acts as keyring:
18 a searchable sequence of keys. Each process is equipped with access
19 to five standard keyrings: UID-specific, GID-specific, session,
20 process and thread.
21
22 If you are unsure as to whether this is required, answer N.
23
24config KEYS_DEBUG_PROC_KEYS
Michael LeMay06ec7be2006-06-26 00:24:56 -070025 bool "Enable the /proc/keys file by which keys may be viewed"
Linus Torvalds1da177e2005-04-16 15:20:36 -070026 depends on KEYS
27 help
Michael LeMay06ec7be2006-06-26 00:24:56 -070028 This option turns on support for the /proc/keys file - through which
29 can be listed all the keys on the system that are viewable by the
30 reading process.
Linus Torvalds1da177e2005-04-16 15:20:36 -070031
Michael LeMay06ec7be2006-06-26 00:24:56 -070032 The only keys included in the list are those that grant View
33 permission to the reading process whether or not it possesses them.
34 Note that LSM security checks are still performed, and may further
35 filter out keys that the current process is not authorised to view.
36
37 Only key attributes are listed here; key payloads are not included in
38 the resulting table.
39
40 If you are unsure as to whether this is required, answer N.
Linus Torvalds1da177e2005-04-16 15:20:36 -070041
Dan Rosenbergeaf06b22010-11-11 14:05:18 -080042config SECURITY_DMESG_RESTRICT
43 bool "Restrict unprivileged access to the kernel syslog"
44 default n
45 help
46 This enforces restrictions on unprivileged users reading the kernel
47 syslog via dmesg(8).
48
49 If this option is not selected, no restrictions will be enforced
50 unless the dmesg_restrict sysctl is explicitly set to (1).
51
52 If you are unsure how to answer this question, answer N.
53
Linus Torvalds1da177e2005-04-16 15:20:36 -070054config SECURITY
55 bool "Enable different security models"
Adrian Bunk2c405792005-08-22 18:20:50 +020056 depends on SYSFS
Linus Torvalds1da177e2005-04-16 15:20:36 -070057 help
58 This allows you to choose different security modules to be
59 configured into your kernel.
60
61 If this option is not selected, the default Linux security
62 model will be used.
63
64 If you are unsure how to answer this question, answer N.
65
Eric Parisda318942008-08-22 11:35:57 -040066config SECURITYFS
67 bool "Enable the securityfs filesystem"
68 help
69 This will build the securityfs filesystem. It is currently used by
Mimi Zohar3323eec92009-02-04 09:06:58 -050070 the TPM bios character driver and IMA, an integrity provider. It is
71 not used by SELinux or SMACK.
Eric Parisda318942008-08-22 11:35:57 -040072
73 If you are unsure how to answer this question, answer N.
74
Linus Torvalds1da177e2005-04-16 15:20:36 -070075config SECURITY_NETWORK
76 bool "Socket and Networking Security Hooks"
77 depends on SECURITY
78 help
79 This enables the socket and networking security hooks.
80 If enabled, a security module can use these hooks to
81 implement socket and networking access controls.
82 If you are unsure how to answer this question, answer N.
83
Trent Jaegerdf718372005-12-13 23:12:27 -080084config SECURITY_NETWORK_XFRM
85 bool "XFRM (IPSec) Networking Security Hooks"
86 depends on XFRM && SECURITY_NETWORK
87 help
88 This enables the XFRM (IPSec) networking security hooks.
89 If enabled, a security module can use these hooks to
90 implement per-packet access controls based on labels
91 derived from IPSec policy. Non-IPSec communications are
92 designated as unlabelled, and only sockets authorized
93 to communicate unlabelled data can send without using
94 IPSec.
95 If you are unsure how to answer this question, answer N.
96
Kentaro Takedabe6d3e52008-12-17 13:24:15 +090097config SECURITY_PATH
98 bool "Security hooks for pathname based access control"
99 depends on SECURITY
100 help
101 This enables the security hooks for pathname based access control.
102 If enabled, a security module can use these hooks to
103 implement pathname based access controls.
104 If you are unsure how to answer this question, answer N.
105
Joseph Cihula31625342009-06-30 19:30:59 -0700106config INTEL_TXT
107 bool "Enable Intel(R) Trusted Execution Technology (Intel(R) TXT)"
Shane Wang69575d32009-09-01 18:25:07 -0700108 depends on HAVE_INTEL_TXT
Joseph Cihula31625342009-06-30 19:30:59 -0700109 help
110 This option enables support for booting the kernel with the
111 Trusted Boot (tboot) module. This will utilize
112 Intel(R) Trusted Execution Technology to perform a measured launch
113 of the kernel. If the system does not support Intel(R) TXT, this
114 will have no effect.
115
Arnaldo Carvalho de Melo3c556e42009-08-12 12:00:40 -0300116 Intel TXT will provide higher assurance of system configuration and
Joseph Cihula31625342009-06-30 19:30:59 -0700117 initial state as well as data reset protection. This is used to
118 create a robust initial kernel measurement and verification, which
119 helps to ensure that kernel security mechanisms are functioning
120 correctly. This level of protection requires a root of trust outside
121 of the kernel itself.
122
123 Intel TXT also helps solve real end user concerns about having
124 confidence that their hardware is running the VMM or kernel that
Arnaldo Carvalho de Melo3c556e42009-08-12 12:00:40 -0300125 it was configured with, especially since they may be responsible for
Joseph Cihula31625342009-06-30 19:30:59 -0700126 providing such assurances to VMs and services running on it.
127
128 See <http://www.intel.com/technology/security/> for more information
129 about Intel(R) TXT.
130 See <http://tboot.sourceforge.net> for more information about tboot.
131 See Documentation/intel_txt.txt for a description of how to enable
132 Intel TXT support in a kernel boot.
133
134 If you are unsure as to whether this is required, answer N.
135
Eric Paris788084a2009-07-31 12:54:11 -0400136config LSM_MMAP_MIN_ADDR
Andreas Schwab024e6cb2009-08-18 22:14:29 +0200137 int "Low address space for LSM to protect from user allocation"
Eric Paris788084a2009-07-31 12:54:11 -0400138 depends on SECURITY && SECURITY_SELINUX
Dave Jonesa58578e2009-08-18 13:47:37 -0400139 default 65536
Eric Paris788084a2009-07-31 12:54:11 -0400140 help
141 This is the portion of low virtual memory which should be protected
142 from userspace allocation. Keeping a user from writing to low pages
143 can help reduce the impact of kernel NULL pointer bugs.
144
145 For most ia64, ppc64 and x86 users with lots of address space
146 a value of 65536 is reasonable and should cause no problems.
147 On arm and other archs it should not be higher than 32768.
148 Programs which use vm86 functionality or have some need to map
149 this low address space will need the permission specific to the
150 systems running LSM.
151
Linus Torvalds1da177e2005-04-16 15:20:36 -0700152source security/selinux/Kconfig
Casey Schauflere114e472008-02-04 22:29:50 -0800153source security/smack/Kconfig
Kentaro Takeda00d7d6f2009-02-05 17:18:17 +0900154source security/tomoyo/Kconfig
John Johansenf9ad1af2010-07-29 14:48:08 -0700155source security/apparmor/Kconfig
Linus Torvalds1da177e2005-04-16 15:20:36 -0700156
Mimi Zohar3323eec92009-02-04 09:06:58 -0500157source security/integrity/ima/Kconfig
158
John Johansen6e65f922009-11-05 17:03:20 -0800159choice
160 prompt "Default security module"
161 default DEFAULT_SECURITY_SELINUX if SECURITY_SELINUX
162 default DEFAULT_SECURITY_SMACK if SECURITY_SMACK
163 default DEFAULT_SECURITY_TOMOYO if SECURITY_TOMOYO
John Johansenf9ad1af2010-07-29 14:48:08 -0700164 default DEFAULT_SECURITY_APPARMOR if SECURITY_APPARMOR
John Johansen6e65f922009-11-05 17:03:20 -0800165 default DEFAULT_SECURITY_DAC
166
167 help
168 Select the security module that will be used by default if the
169 kernel parameter security= is not specified.
170
171 config DEFAULT_SECURITY_SELINUX
172 bool "SELinux" if SECURITY_SELINUX=y
173
174 config DEFAULT_SECURITY_SMACK
175 bool "Simplified Mandatory Access Control" if SECURITY_SMACK=y
176
177 config DEFAULT_SECURITY_TOMOYO
178 bool "TOMOYO" if SECURITY_TOMOYO=y
179
John Johansenf9ad1af2010-07-29 14:48:08 -0700180 config DEFAULT_SECURITY_APPARMOR
181 bool "AppArmor" if SECURITY_APPARMOR=y
182
John Johansen6e65f922009-11-05 17:03:20 -0800183 config DEFAULT_SECURITY_DAC
184 bool "Unix Discretionary Access Controls"
185
186endchoice
187
188config DEFAULT_SECURITY
189 string
190 default "selinux" if DEFAULT_SECURITY_SELINUX
191 default "smack" if DEFAULT_SECURITY_SMACK
192 default "tomoyo" if DEFAULT_SECURITY_TOMOYO
John Johansenf9ad1af2010-07-29 14:48:08 -0700193 default "apparmor" if DEFAULT_SECURITY_APPARMOR
John Johansen6e65f922009-11-05 17:03:20 -0800194 default "" if DEFAULT_SECURITY_DAC
195
Linus Torvalds1da177e2005-04-16 15:20:36 -0700196endmenu
197