blob: e7af647800b6e50d46a1f9c2479b00f2c1ea01cd [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*******************************************************************************
2*
3* (c) 1998 by Computone Corporation
4*
5********************************************************************************
6*
7*
8* PACKAGE: Linux tty Device Driver for IntelliPort family of multiport
9* serial I/O controllers.
10*
11* DESCRIPTION: Definition table for In-line and Bypass commands. Applicable
12* only when the standard loadware is active. (This is included
13* source code, not a separate compilation module.)
14*
15*******************************************************************************/
16
17//------------------------------------------------------------------------------
18//
19// Revision History:
20//
21// 10 October 1991 MAG First Draft
22// 7 November 1991 MAG Reflects additional commands.
23// 24 February 1992 MAG Additional commands for 1.4.x loadware
24// 11 March 1992 MAG Additional commands
25// 30 March 1992 MAG Additional command: CMD_DSS_NOW
26// 18 May 1992 MAG Discovered commands 39 & 40 must be at the end of a
27// packet: affects implementation.
28//------------------------------------------------------------------------------
29
30//************
31//* Includes *
32//************
33
34#include "i2cmd.h" /* To get some bit-defines */
35
36//------------------------------------------------------------------------------
37// Here is the table of global arrays which represent each type of command
38// supported in the IntelliPort standard loadware. See also i2cmd.h
39// for a more complete explanation of what is going on.
40//------------------------------------------------------------------------------
41
42// Here are the various globals: note that the names are not used except through
43// the macros defined in i2cmd.h. Also note that although they are character
44// arrays here (for extendability) they are cast to structure pointers in the
45// i2cmd.h macros. See i2cmd.h for flags definitions.
46
47// Length Flags Command
48static UCHAR ct02[] = { 1, BTH, 0x02 }; // DTR UP
49static UCHAR ct03[] = { 1, BTH, 0x03 }; // DTR DN
50static UCHAR ct04[] = { 1, BTH, 0x04 }; // RTS UP
51static UCHAR ct05[] = { 1, BTH, 0x05 }; // RTS DN
52static UCHAR ct06[] = { 1, BYP, 0x06 }; // START FL
53static UCHAR ct07[] = { 2, BTH, 0x07,0 }; // BAUD
54static UCHAR ct08[] = { 2, BTH, 0x08,0 }; // BITS
55static UCHAR ct09[] = { 2, BTH, 0x09,0 }; // STOP
56static UCHAR ct10[] = { 2, BTH, 0x0A,0 }; // PARITY
57static UCHAR ct11[] = { 2, BTH, 0x0B,0 }; // XON
58static UCHAR ct12[] = { 2, BTH, 0x0C,0 }; // XOFF
59static UCHAR ct13[] = { 1, BTH, 0x0D }; // STOP FL
60static UCHAR ct14[] = { 1, BYP|VIP, 0x0E }; // ACK HOTK
61//static UCHAR ct15[]={ 2, BTH|VIP, 0x0F,0 }; // IRQ SET
62static UCHAR ct16[] = { 2, INL, 0x10,0 }; // IXONOPTS
63static UCHAR ct17[] = { 2, INL, 0x11,0 }; // OXONOPTS
64static UCHAR ct18[] = { 1, INL, 0x12 }; // CTSENAB
65static UCHAR ct19[] = { 1, BTH, 0x13 }; // CTSDSAB
66static UCHAR ct20[] = { 1, INL, 0x14 }; // DCDENAB
67static UCHAR ct21[] = { 1, BTH, 0x15 }; // DCDDSAB
68static UCHAR ct22[] = { 1, BTH, 0x16 }; // DSRENAB
69static UCHAR ct23[] = { 1, BTH, 0x17 }; // DSRDSAB
70static UCHAR ct24[] = { 1, BTH, 0x18 }; // RIENAB
71static UCHAR ct25[] = { 1, BTH, 0x19 }; // RIDSAB
72static UCHAR ct26[] = { 2, BTH, 0x1A,0 }; // BRKENAB
73static UCHAR ct27[] = { 1, BTH, 0x1B }; // BRKDSAB
74//static UCHAR ct28[]={ 2, BTH, 0x1C,0 }; // MAXBLOKSIZE
75//static UCHAR ct29[]={ 2, 0, 0x1D,0 }; // reserved
76static UCHAR ct30[] = { 1, INL, 0x1E }; // CTSFLOWENAB
77static UCHAR ct31[] = { 1, INL, 0x1F }; // CTSFLOWDSAB
78static UCHAR ct32[] = { 1, INL, 0x20 }; // RTSFLOWENAB
79static UCHAR ct33[] = { 1, INL, 0x21 }; // RTSFLOWDSAB
80static UCHAR ct34[] = { 2, BTH, 0x22,0 }; // ISTRIPMODE
81static UCHAR ct35[] = { 2, BTH|END, 0x23,0 }; // SENDBREAK
82static UCHAR ct36[] = { 2, BTH, 0x24,0 }; // SETERRMODE
83//static UCHAR ct36a[]={ 3, INL, 0x24,0,0 }; // SET_REPLACE
84
85// The following is listed for completeness, but should never be sent directly
86// by user-level code. It is sent only by library routines in response to data
87// movement.
88//static UCHAR ct37[]={ 5, BYP|VIP, 0x25,0,0,0,0 }; // FLOW PACKET
89
90// Back to normal
91//static UCHAR ct38[] = {11, BTH|VAR, 0x26,0,0,0,0,0,0,0,0,0,0 }; // DEF KEY SEQ
92//static UCHAR ct39[]={ 3, BTH|END, 0x27,0,0 }; // OPOSTON
93//static UCHAR ct40[]={ 1, BTH|END, 0x28 }; // OPOSTOFF
94static UCHAR ct41[] = { 1, BYP, 0x29 }; // RESUME
95//static UCHAR ct42[]={ 2, BTH, 0x2A,0 }; // TXBAUD
96//static UCHAR ct43[]={ 2, BTH, 0x2B,0 }; // RXBAUD
97//static UCHAR ct44[]={ 2, BTH, 0x2C,0 }; // MS PING
98//static UCHAR ct45[]={ 1, BTH, 0x2D }; // HOTENAB
99//static UCHAR ct46[]={ 1, BTH, 0x2E }; // HOTDSAB
Adrian Bunk995c6ed2005-06-25 14:59:16 -0700100//static UCHAR ct47[]={ 7, BTH, 0x2F,0,0,0,0,0,0 }; // UNIX FLAGS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700101//static UCHAR ct48[]={ 1, BTH, 0x30 }; // DSRFLOWENAB
102//static UCHAR ct49[]={ 1, BTH, 0x31 }; // DSRFLOWDSAB
103//static UCHAR ct50[]={ 1, BTH, 0x32 }; // DTRFLOWENAB
104//static UCHAR ct51[]={ 1, BTH, 0x33 }; // DTRFLOWDSAB
105//static UCHAR ct52[]={ 1, BTH, 0x34 }; // BAUDTABRESET
106//static UCHAR ct53[] = { 3, BTH, 0x35,0,0 }; // BAUDREMAP
107static UCHAR ct54[] = { 3, BTH, 0x36,0,0 }; // CUSTOMBAUD1
108static UCHAR ct55[] = { 3, BTH, 0x37,0,0 }; // CUSTOMBAUD2
109static UCHAR ct56[] = { 2, BTH|END, 0x38,0 }; // PAUSE
110static UCHAR ct57[] = { 1, BYP, 0x39 }; // SUSPEND
111static UCHAR ct58[] = { 1, BYP, 0x3A }; // UNSUSPEND
112static UCHAR ct59[] = { 2, BTH, 0x3B,0 }; // PARITYCHK
113static UCHAR ct60[] = { 1, INL|VIP, 0x3C }; // BOOKMARKREQ
114//static UCHAR ct61[]={ 2, BTH, 0x3D,0 }; // INTERNALLOOP
115//static UCHAR ct62[]={ 2, BTH, 0x3E,0 }; // HOTKTIMEOUT
116static UCHAR ct63[] = { 2, INL, 0x3F,0 }; // SETTXON
117static UCHAR ct64[] = { 2, INL, 0x40,0 }; // SETTXOFF
118//static UCHAR ct65[]={ 2, BTH, 0x41,0 }; // SETAUTORTS
119//static UCHAR ct66[]={ 2, BTH, 0x42,0 }; // SETHIGHWAT
120//static UCHAR ct67[]={ 2, BYP, 0x43,0 }; // STARTSELFL
121//static UCHAR ct68[]={ 2, INL, 0x44,0 }; // ENDSELFL
122//static UCHAR ct69[]={ 1, BYP, 0x45 }; // HWFLOW_OFF
123//static UCHAR ct70[]={ 1, BTH, 0x46 }; // ODSRFL_ENAB
124//static UCHAR ct71[]={ 1, BTH, 0x47 }; // ODSRFL_DSAB
125//static UCHAR ct72[]={ 1, BTH, 0x48 }; // ODCDFL_ENAB
126//static UCHAR ct73[]={ 1, BTH, 0x49 }; // ODCDFL_DSAB
127//static UCHAR ct74[]={ 2, BTH, 0x4A,0 }; // LOADLEVEL
128//static UCHAR ct75[]={ 2, BTH, 0x4B,0 }; // STATDATA
129//static UCHAR ct76[]={ 1, BYP, 0x4C }; // BREAK_ON
130//static UCHAR ct77[]={ 1, BYP, 0x4D }; // BREAK_OFF
131//static UCHAR ct78[]={ 1, BYP, 0x4E }; // GETFC
132static UCHAR ct79[] = { 2, BYP, 0x4F,0 }; // XMIT_NOW
133//static UCHAR ct80[]={ 4, BTH, 0x50,0,0,0 }; // DIVISOR_LATCH
134//static UCHAR ct81[]={ 1, BYP, 0x51 }; // GET_STATUS
135//static UCHAR ct82[]={ 1, BYP, 0x52 }; // GET_TXCNT
136//static UCHAR ct83[]={ 1, BYP, 0x53 }; // GET_RXCNT
137//static UCHAR ct84[]={ 1, BYP, 0x54 }; // GET_BOXIDS
138//static UCHAR ct85[]={10, BYP, 0x55,0,0,0,0,0,0,0,0,0 }; // ENAB_MULT
139//static UCHAR ct86[]={ 2, BTH, 0x56,0 }; // RCV_ENABLE
140static UCHAR ct87[] = { 1, BYP, 0x57 }; // HW_TEST
141//static UCHAR ct88[]={ 3, BTH, 0x58,0,0 }; // RCV_THRESHOLD
Linus Torvalds1da177e2005-04-16 15:20:36 -0700142//static UCHAR ct90[]={ 3, BYP, 0x5A,0,0 }; // Set SILO
143//static UCHAR ct91[]={ 2, BYP, 0x5B,0 }; // timed break
144
145// Some composite commands as well
146//static UCHAR cc01[]={ 2, BTH, 0x02,0x04 }; // DTR & RTS UP
147//static UCHAR cc02[]={ 2, BTH, 0x03,0x05 }; // DTR & RTS DN
148
149//********
150//* Code *
151//********
152
153//******************************************************************************
154// Function: i2cmdUnixFlags(iflag, cflag, lflag)
155// Parameters: Unix tty flags
156//
157// Returns: Pointer to command structure
158//
159// Description:
160//
161// This routine sets the parameters of command 47 and returns a pointer to the
162// appropriate structure.
163//******************************************************************************
Adrian Bunk995c6ed2005-06-25 14:59:16 -0700164#if 0
Linus Torvalds1da177e2005-04-16 15:20:36 -0700165cmdSyntaxPtr
166i2cmdUnixFlags(unsigned short iflag,unsigned short cflag,unsigned short lflag)
167{
168 cmdSyntaxPtr pCM = (cmdSyntaxPtr) ct47;
169
170 pCM->cmd[1] = (unsigned char) iflag;
171 pCM->cmd[2] = (unsigned char) (iflag >> 8);
172 pCM->cmd[3] = (unsigned char) cflag;
173 pCM->cmd[4] = (unsigned char) (cflag >> 8);
174 pCM->cmd[5] = (unsigned char) lflag;
175 pCM->cmd[6] = (unsigned char) (lflag >> 8);
176 return pCM;
177}
Adrian Bunk995c6ed2005-06-25 14:59:16 -0700178#endif /* 0 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700179
180//******************************************************************************
181// Function: i2cmdBaudDef(which, rate)
182// Parameters: ?
183//
184// Returns: Pointer to command structure
185//
186// Description:
187//
188// This routine sets the parameters of commands 54 or 55 (according to the
189// argument which), and returns a pointer to the appropriate structure.
190//******************************************************************************
Adrian Bunk995c6ed2005-06-25 14:59:16 -0700191static cmdSyntaxPtr
Linus Torvalds1da177e2005-04-16 15:20:36 -0700192i2cmdBaudDef(int which, unsigned short rate)
193{
194 cmdSyntaxPtr pCM;
195
196 switch(which)
197 {
198 case 1:
199 pCM = (cmdSyntaxPtr) ct54;
200 break;
201 default:
202 case 2:
203 pCM = (cmdSyntaxPtr) ct55;
204 break;
205 }
206 pCM->cmd[1] = (unsigned char) rate;
207 pCM->cmd[2] = (unsigned char) (rate >> 8);
208 return pCM;
209}
210