blob: 474a17e4db0cc35f20e7423189d98ec1eff385b0 [file] [log] [blame]
Akihiro Tsukada5eca4822009-08-25 02:39:51 -03001/* DVB USB compliant Linux driver for the Friio USB2.0 ISDB-T receiver.
2 *
3 * Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
4 *
5 * This module is based off the the gl861 and vp702x modules.
6 *
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of the GNU General Public License as published by the Free
9 * Software Foundation, version 2.
10 *
11 * see Documentation/dvb/README.dvb-usb for more information
12 */
13#include "friio.h"
14
15/* debug */
16int dvb_usb_friio_debug;
17module_param_named(debug, dvb_usb_friio_debug, int, 0644);
18MODULE_PARM_DESC(debug,
19 "set debugging level (1=info,2=xfer,4=rc,8=fe (or-able))."
20 DVB_USB_DEBUG_STATUS);
21
22DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
23
24/**
25 * Indirect I2C access to the PLL via FE.
26 * whole I2C protocol data to the PLL is sent via the FE's I2C register.
27 * This is done by a control msg to the FE with the I2C data accompanied, and
28 * a specific USB request number is assigned for that purpose.
29 *
30 * this func sends wbuf[1..] to the I2C register wbuf[0] at addr (= at FE).
31 * TODO: refoctored, smarter i2c functions.
32 */
33static int gl861_i2c_ctrlmsg_data(struct dvb_usb_device *d, u8 addr,
34 u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
35{
36 u16 index = wbuf[0]; /* must be JDVBT90502_2ND_I2C_REG(=0xFE) */
37 u16 value = addr << (8 + 1);
38 int wo = (rbuf == NULL || rlen == 0); /* write only */
39 u8 req, type;
40
41 deb_xfer("write to PLL:0x%02x via FE reg:0x%02x, len:%d\n",
42 wbuf[1], wbuf[0], wlen - 1);
43
44 if (wo && wlen >= 2) {
45 req = GL861_REQ_I2C_DATA_CTRL_WRITE;
46 type = GL861_WRITE;
47 udelay(20);
48 return usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0),
49 req, type, value, index,
50 &wbuf[1], wlen - 1, 2000);
51 }
52
53 deb_xfer("not supported ctrl-msg, aborting.");
54 return -EINVAL;
55}
56
57/* normal I2C access (without extra data arguments).
58 * write to the register wbuf[0] at I2C address addr with the value wbuf[1],
59 * or read from the register wbuf[0].
60 * register address can be 16bit (wbuf[2]<<8 | wbuf[0]) if wlen==3
61 */
62static int gl861_i2c_msg(struct dvb_usb_device *d, u8 addr,
63 u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
64{
65 u16 index;
66 u16 value = addr << (8 + 1);
67 int wo = (rbuf == NULL || rlen == 0); /* write-only */
68 u8 req, type;
69 unsigned int pipe;
70
71 /* special case for the indirect I2C access to the PLL via FE, */
72 if (addr == friio_fe_config.demod_address &&
73 wbuf[0] == JDVBT90502_2ND_I2C_REG)
74 return gl861_i2c_ctrlmsg_data(d, addr, wbuf, wlen, rbuf, rlen);
75
76 if (wo) {
77 req = GL861_REQ_I2C_WRITE;
78 type = GL861_WRITE;
79 pipe = usb_sndctrlpipe(d->udev, 0);
80 } else { /* rw */
81 req = GL861_REQ_I2C_READ;
82 type = GL861_READ;
83 pipe = usb_rcvctrlpipe(d->udev, 0);
84 }
85
86 switch (wlen) {
87 case 1:
88 index = wbuf[0];
89 break;
90 case 2:
91 index = wbuf[0];
92 value = value + wbuf[1];
93 break;
94 case 3:
95 /* special case for 16bit register-address */
96 index = (wbuf[2] << 8) | wbuf[0];
97 value = value + wbuf[1];
98 break;
99 default:
100 deb_xfer("wlen = %x, aborting.", wlen);
101 return -EINVAL;
102 }
103 msleep(1);
104 return usb_control_msg(d->udev, pipe, req, type,
105 value, index, rbuf, rlen, 2000);
106}
107
108/* I2C */
109static int gl861_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
110 int num)
111{
112 struct dvb_usb_device *d = i2c_get_adapdata(adap);
113 int i;
114
115
116 if (num > 2)
117 return -EINVAL;
118
119 if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
120 return -EAGAIN;
121
122 for (i = 0; i < num; i++) {
123 /* write/read request */
124 if (i + 1 < num && (msg[i + 1].flags & I2C_M_RD)) {
125 if (gl861_i2c_msg(d, msg[i].addr,
126 msg[i].buf, msg[i].len,
127 msg[i + 1].buf, msg[i + 1].len) < 0)
128 break;
129 i++;
130 } else
131 if (gl861_i2c_msg(d, msg[i].addr, msg[i].buf,
132 msg[i].len, NULL, 0) < 0)
133 break;
134 }
135
136 mutex_unlock(&d->i2c_mutex);
137 return i;
138}
139
140static u32 gl861_i2c_func(struct i2c_adapter *adapter)
141{
142 return I2C_FUNC_I2C;
143}
144
Akihiro Tsukada5eca4822009-08-25 02:39:51 -0300145static int friio_ext_ctl(struct dvb_usb_adapter *adap,
146 u32 sat_color, int lnb_on)
147{
148 int i;
149 int ret;
150 struct i2c_msg msg;
Florian Mickler0e4e7202011-03-21 15:33:43 -0300151 u8 *buf;
Akihiro Tsukada5eca4822009-08-25 02:39:51 -0300152 u32 mask;
153 u8 lnb = (lnb_on) ? FRIIO_CTL_LNB : 0;
154
Florian Mickler0e4e7202011-03-21 15:33:43 -0300155 buf = kmalloc(2, GFP_KERNEL);
156 if (!buf)
157 return -ENOMEM;
158
Akihiro Tsukada5eca4822009-08-25 02:39:51 -0300159 msg.addr = 0x00;
160 msg.flags = 0;
161 msg.len = 2;
162 msg.buf = buf;
163
164 buf[0] = 0x00;
165
166 /* send 2bit header (&B10) */
167 buf[1] = lnb | FRIIO_CTL_LED | FRIIO_CTL_STROBE;
168 ret = gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
169 buf[1] |= FRIIO_CTL_CLK;
170 ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
171
172 buf[1] = lnb | FRIIO_CTL_STROBE;
173 ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
174 buf[1] |= FRIIO_CTL_CLK;
175 ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
176
177 /* send 32bit(satur, R, G, B) data in serial */
178 mask = 1 << 31;
179 for (i = 0; i < 32; i++) {
180 buf[1] = lnb | FRIIO_CTL_STROBE;
181 if (sat_color & mask)
182 buf[1] |= FRIIO_CTL_LED;
183 ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
184 buf[1] |= FRIIO_CTL_CLK;
185 ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
186 mask >>= 1;
187 }
188
189 /* set the strobe off */
190 buf[1] = lnb;
191 ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
192 buf[1] |= FRIIO_CTL_CLK;
193 ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
194
Florian Mickler0e4e7202011-03-21 15:33:43 -0300195 kfree(buf);
Akihiro Tsukada5eca4822009-08-25 02:39:51 -0300196 return (ret == 70);
197}
198
199
200static int friio_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff);
201
202/* TODO: move these init cmds to the FE's init routine? */
203static u8 streaming_init_cmds[][2] = {
204 {0x33, 0x08},
205 {0x37, 0x40},
206 {0x3A, 0x1F},
207 {0x3B, 0xFF},
208 {0x3C, 0x1F},
209 {0x3D, 0xFF},
210 {0x38, 0x00},
211 {0x35, 0x00},
212 {0x39, 0x00},
213 {0x36, 0x00},
214};
215static int cmdlen = sizeof(streaming_init_cmds) / 2;
216
217/*
218 * Command sequence in this init function is a replay
219 * of the captured USB commands from the Windows proprietary driver.
220 */
221static int friio_initialize(struct dvb_usb_device *d)
222{
223 int ret;
224 int i;
225 int retry = 0;
Florian Mickler0e4e7202011-03-21 15:33:43 -0300226 u8 *rbuf, *wbuf;
Akihiro Tsukada5eca4822009-08-25 02:39:51 -0300227
228 deb_info("%s called.\n", __func__);
229
Florian Mickler0e4e7202011-03-21 15:33:43 -0300230 wbuf = kmalloc(3, GFP_KERNEL);
231 if (!wbuf)
232 return -ENOMEM;
233
234 rbuf = kmalloc(2, GFP_KERNEL);
235 if (!rbuf) {
236 kfree(wbuf);
237 return -ENOMEM;
238 }
239
Akihiro Tsukada5eca4822009-08-25 02:39:51 -0300240 /* use gl861_i2c_msg instead of gl861_i2c_xfer(), */
241 /* because the i2c device is not set up yet. */
242 wbuf[0] = 0x11;
243 wbuf[1] = 0x02;
244 ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
245 if (ret < 0)
246 goto error;
247 msleep(2);
248
249 wbuf[0] = 0x11;
250 wbuf[1] = 0x00;
251 ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
252 if (ret < 0)
253 goto error;
254 msleep(1);
255
256 /* following msgs should be in the FE's init code? */
257 /* cmd sequence to identify the device type? (friio black/white) */
258 wbuf[0] = 0x03;
259 wbuf[1] = 0x80;
260 /* can't use gl861_i2c_cmd, as the register-addr is 16bit(0x0100) */
261 ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0),
262 GL861_REQ_I2C_DATA_CTRL_WRITE, GL861_WRITE,
263 0x1200, 0x0100, wbuf, 2, 2000);
264 if (ret < 0)
265 goto error;
266
267 msleep(2);
268 wbuf[0] = 0x00;
269 wbuf[2] = 0x01; /* reg.0x0100 */
270 wbuf[1] = 0x00;
271 ret = gl861_i2c_msg(d, 0x12 >> 1, wbuf, 3, rbuf, 2);
272 /* my Friio White returns 0xffff. */
273 if (ret < 0 || rbuf[0] != 0xff || rbuf[1] != 0xff)
274 goto error;
275
276 msleep(2);
277 wbuf[0] = 0x03;
278 wbuf[1] = 0x80;
279 ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0),
280 GL861_REQ_I2C_DATA_CTRL_WRITE, GL861_WRITE,
281 0x9000, 0x0100, wbuf, 2, 2000);
282 if (ret < 0)
283 goto error;
284
285 msleep(2);
286 wbuf[0] = 0x00;
287 wbuf[2] = 0x01; /* reg.0x0100 */
288 wbuf[1] = 0x00;
289 ret = gl861_i2c_msg(d, 0x90 >> 1, wbuf, 3, rbuf, 2);
290 /* my Friio White returns 0xffff again. */
291 if (ret < 0 || rbuf[0] != 0xff || rbuf[1] != 0xff)
292 goto error;
293
294 msleep(1);
295
296restart:
297 /* ============ start DEMOD init cmds ================== */
298 /* read PLL status to clear the POR bit */
299 wbuf[0] = JDVBT90502_2ND_I2C_REG;
300 wbuf[1] = (FRIIO_PLL_ADDR << 1) + 1; /* +1 for reading */
301 ret = gl861_i2c_msg(d, FRIIO_DEMOD_ADDR, wbuf, 2, NULL, 0);
302 if (ret < 0)
303 goto error;
304
305 msleep(5);
306 /* note: DEMODULATOR has 16bit register-address. */
307 wbuf[0] = 0x00;
308 wbuf[2] = 0x01; /* reg addr: 0x0100 */
309 wbuf[1] = 0x00; /* val: not used */
310 ret = gl861_i2c_msg(d, FRIIO_DEMOD_ADDR, wbuf, 3, rbuf, 1);
311 if (ret < 0)
312 goto error;
313/*
314 msleep(1);
315 wbuf[0] = 0x80;
316 wbuf[1] = 0x00;
317 ret = gl861_i2c_msg(d, FRIIO_DEMOD_ADDR, wbuf, 2, rbuf, 1);
318 if (ret < 0)
319 goto error;
320 */
321 if (rbuf[0] & 0x80) { /* still in PowerOnReset state? */
322 if (++retry > 3) {
323 deb_info("failed to get the correct"
324 " FE demod status:0x%02x\n", rbuf[0]);
325 goto error;
326 }
327 msleep(100);
328 goto restart;
329 }
330
331 /* TODO: check return value in rbuf */
332 /* =========== end DEMOD init cmds ===================== */
333 msleep(1);
334
335 wbuf[0] = 0x30;
336 wbuf[1] = 0x04;
337 ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
338 if (ret < 0)
339 goto error;
340
341 msleep(2);
342 /* following 2 cmds unnecessary? */
343 wbuf[0] = 0x00;
344 wbuf[1] = 0x01;
345 ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
346 if (ret < 0)
347 goto error;
348
349 wbuf[0] = 0x06;
350 wbuf[1] = 0x0F;
351 ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
352 if (ret < 0)
353 goto error;
354
355 /* some streaming ctl cmds (maybe) */
356 msleep(10);
357 for (i = 0; i < cmdlen; i++) {
358 ret = gl861_i2c_msg(d, 0x00, streaming_init_cmds[i], 2,
359 NULL, 0);
360 if (ret < 0)
361 goto error;
362 msleep(1);
363 }
364 msleep(20);
365
366 /* change the LED color etc. */
367 ret = friio_streaming_ctrl(&d->adapter[0], 0);
368 if (ret < 0)
369 goto error;
370
371 return 0;
372
373error:
Florian Mickler0e4e7202011-03-21 15:33:43 -0300374 kfree(wbuf);
375 kfree(rbuf);
Akihiro Tsukada5eca4822009-08-25 02:39:51 -0300376 deb_info("%s:ret == %d\n", __func__, ret);
377 return -EIO;
378}
379
380/* Callbacks for DVB USB */
381
382static int friio_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
383{
384 int ret;
385
386 deb_info("%s called.(%d)\n", __func__, onoff);
387
388 /* set the LED color and saturation (and LNB on) */
389 if (onoff)
390 ret = friio_ext_ctl(adap, 0x6400ff64, 1);
391 else
392 ret = friio_ext_ctl(adap, 0x96ff00ff, 1);
393
394 if (ret != 1) {
395 deb_info("%s failed to send cmdx. ret==%d\n", __func__, ret);
396 return -EREMOTEIO;
397 }
398 return 0;
399}
400
401static int friio_frontend_attach(struct dvb_usb_adapter *adap)
402{
403 if (friio_initialize(adap->dev) < 0)
404 return -EIO;
405
Michael Krufky77eed212011-09-06 09:31:57 -0300406 adap->fe_adap[0].fe = jdvbt90502_attach(adap->dev);
407 if (adap->fe_adap[0].fe == NULL)
Akihiro Tsukada5eca4822009-08-25 02:39:51 -0300408 return -EIO;
409
410 return 0;
411}
412
413/* DVB USB Driver stuff */
414static struct dvb_usb_device_properties friio_properties;
415
416static int friio_probe(struct usb_interface *intf,
417 const struct usb_device_id *id)
418{
419 struct dvb_usb_device *d;
420 struct usb_host_interface *alt;
421 int ret;
422
423 if (intf->num_altsetting < GL861_ALTSETTING_COUNT)
424 return -ENODEV;
425
426 alt = usb_altnum_to_altsetting(intf, FRIIO_BULK_ALTSETTING);
427 if (alt == NULL) {
428 deb_rc("not alt found!\n");
429 return -ENODEV;
430 }
431 ret = usb_set_interface(interface_to_usbdev(intf),
432 alt->desc.bInterfaceNumber,
433 alt->desc.bAlternateSetting);
434 if (ret != 0) {
435 deb_rc("failed to set alt-setting!\n");
436 return ret;
437 }
438
439 ret = dvb_usb_device_init(intf, &friio_properties,
440 THIS_MODULE, &d, adapter_nr);
441 if (ret == 0)
442 friio_streaming_ctrl(&d->adapter[0], 1);
443
444 return ret;
445}
446
447
448struct jdvbt90502_config friio_fe_config = {
449 .demod_address = FRIIO_DEMOD_ADDR,
450 .pll_address = FRIIO_PLL_ADDR,
451};
452
453static struct i2c_algorithm gl861_i2c_algo = {
454 .master_xfer = gl861_i2c_xfer,
455 .functionality = gl861_i2c_func,
456};
457
458static struct usb_device_id friio_table[] = {
459 { USB_DEVICE(USB_VID_774, USB_PID_FRIIO_WHITE) },
460 { } /* Terminating entry */
461};
462MODULE_DEVICE_TABLE(usb, friio_table);
463
464
465static struct dvb_usb_device_properties friio_properties = {
466 .caps = DVB_USB_IS_AN_I2C_ADAPTER,
467 .usb_ctrl = DEVICE_SPECIFIC,
468
469 .size_of_priv = 0,
470
471 .num_adapters = 1,
472 .adapter = {
473 /* caps:0 => no pid filter, 188B TS packet */
474 /* GL861 has a HW pid filter, but no info available. */
475 {
Michael Krufky77eed212011-09-06 09:31:57 -0300476 .num_frontends = 1,
477 .fe = {{
Akihiro Tsukada5eca4822009-08-25 02:39:51 -0300478 .caps = 0,
479
480 .frontend_attach = friio_frontend_attach,
481 .streaming_ctrl = friio_streaming_ctrl,
482
483 .stream = {
484 .type = USB_BULK,
485 /* count <= MAX_NO_URBS_FOR_DATA_STREAM(10) */
486 .count = 8,
487 .endpoint = 0x01,
488 .u = {
489 /* GL861 has 6KB buf inside */
490 .bulk = {
491 .buffersize = 16384,
492 }
493 }
494 },
Michael Krufky77eed212011-09-06 09:31:57 -0300495 }},
Akihiro Tsukada5eca4822009-08-25 02:39:51 -0300496 }
497 },
498 .i2c_algo = &gl861_i2c_algo,
499
500 .num_device_descs = 1,
501 .devices = {
502 {
503 .name = "774 Friio ISDB-T USB2.0",
504 .cold_ids = { NULL },
505 .warm_ids = { &friio_table[0], NULL },
506 },
507 }
508};
509
510static struct usb_driver friio_driver = {
511 .name = "dvb_usb_friio",
512 .probe = friio_probe,
513 .disconnect = dvb_usb_device_exit,
514 .id_table = friio_table,
515};
516
Greg Kroah-Hartmanecb3b2b2011-11-18 09:46:12 -0800517module_usb_driver(friio_driver);
Akihiro Tsukada5eca4822009-08-25 02:39:51 -0300518
519MODULE_AUTHOR("Akihiro Tsukada <tskd2@yahoo.co.jp>");
520MODULE_DESCRIPTION("Driver for Friio ISDB-T USB2.0 Receiver");
521MODULE_VERSION("0.2");
522MODULE_LICENSE("GPL");