Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.9 / d0c15054a31e0432dce13f47a05d3fd8a66759d8 / . / drivers / regulator / Kconfig
blob: ce785f481281d2532dca6514e07a304ccfcb7b04 [file] [log] [blame]
Takashi Iwaibbda14d2008-10-30 15:57:05 +0100[diff] [blame]1menuconfig REGULATOR
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]2 bool "Voltage and Current Regulator Support"
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]3 help
4 Generic Voltage and Current Regulator support.
5
6 This framework is designed to provide a generic interface to voltage
7 and current regulators within the Linux kernel. It's intended to
8 provide voltage and current control to client or consumer drivers and
9 also provide status information to user space applications through a
10 sysfs interface.
11
12 The intention is to allow systems to dynamically control regulator
13 output in order to save power and prolong battery life. This applies
14 to both voltage regulators (where voltage output is controllable) and
15 current sinks (where current output is controllable).
16
17 This framework safely compiles out if not selected so that client
18 drivers can still be used in systems with no software controllable
19 regulators.
20
21 If unsure, say no.
22
Mark Brown809d3102012-06-20 11:08:43 +0100[diff] [blame]23
Takashi Iwaibbda14d2008-10-30 15:57:05 +0100[diff] [blame]24if REGULATOR
25
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]26config REGULATOR_DEBUG
27 bool "Regulator debug support"
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]28 help
29 Say yes here to enable debugging support.
30
31config REGULATOR_FIXED_VOLTAGE
Mark Browna9cb63b2009-01-19 13:37:05 +0000[diff] [blame]32 tristate "Fixed voltage regulator support"
Mark Browna9cb63b2009-01-19 13:37:05 +0000[diff] [blame]33 help
34 This driver provides support for fixed voltage regulators,
35 useful for systems which use a combination of software
36 managed regulators and simple non-configurable regulators.
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]37
38config REGULATOR_VIRTUAL_CONSUMER
39 tristate "Virtual regulator consumer support"
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]40 help
41 This driver provides a virtual consumer for the voltage and
Michael Jonesc6d678b2012-07-26 16:07:23 +0200[diff] [blame]42 current regulator API which provides sysfs controls for
43 configuring the supplies requested. This is mainly useful
44 for test purposes.
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]45
Michael Jonesc6d678b2012-07-26 16:07:23 +0200[diff] [blame]46 If unsure, say no.
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]47
Mike Rapoport1d98ccc2009-04-26 16:49:39 +0300[diff] [blame]48config REGULATOR_USERSPACE_CONSUMER
49 tristate "Userspace regulator consumer support"
Mike Rapoport1d98ccc2009-04-26 16:49:39 +0300[diff] [blame]50 help
51 There are some classes of devices that are controlled entirely
Michael Prokop6f2653e2009-09-05 02:59:14 +0200[diff] [blame]52 from user space. Userspace consumer driver provides ability to
Mike Rapoport1d98ccc2009-04-26 16:49:39 +0300[diff] [blame]53 control power supplies for such devices.
54
Michael Jonesc6d678b2012-07-26 16:07:23 +0200[diff] [blame]55 If unsure, say no.
Mike Rapoport1d98ccc2009-04-26 16:49:39 +0300[diff] [blame]56
Chao Xie95f1dc02013-07-17 23:07:03 -0400[diff] [blame]57config REGULATOR_88PM800
58 tristate "Marvell 88PM800 Power regulators"
Axel Lin7c45f602013-07-19 09:17:53 +0800[diff] [blame]59 depends on MFD_88PM800
Chao Xie95f1dc02013-07-17 23:07:03 -0400[diff] [blame]60 help
61 This driver supports Marvell 88PM800 voltage regulator chips.
62 It delivers digitally programmable output,
63 the voltage is programmed via I2C interface.
64 It's suitable to support PXA988 chips to control VCC_MAIN and
65 various voltages.
66
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]67config REGULATOR_88PM8607
Mark Brown631a1fc2013-07-29 16:49:46 +0100[diff] [blame]68 tristate "Marvell 88PM8607 Power regulators"
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]69 depends on MFD_88PM860X=y
Heiko Stübner3f0292a2011-10-05 12:27:05 +0200[diff] [blame]70 help
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]71 This driver supports 88PM8607 voltage regulator chips.
Heiko Stübner3f0292a2011-10-05 12:27:05 +0200[diff] [blame]72
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]73config REGULATOR_AD5398
74 tristate "Analog Devices AD5398/AD5821 regulators"
75 depends on I2C
Philipp Zabel0eb5d5a2008-07-11 17:28:06 +0200[diff] [blame]76 help
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]77 This driver supports AD5398 and AD5821 current regulator chips.
78 If building into module, its name is ad5398.ko.
79
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]80config REGULATOR_ANATOP
81 tristate "Freescale i.MX on-chip ANATOP LDO regulators"
82 depends on MFD_SYSCON
83 help
84 Say y here to support Freescale i.MX on-chip ANATOP LDOs
85 regulators. It is recommended that this option be
86 enabled on i.MX6 platform.
87
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]88config REGULATOR_AAT2870
89 tristate "AnalogicTech AAT2870 Regulators"
90 depends on MFD_AAT2870_CORE
91 help
92 If you have a AnalogicTech AAT2870 say Y to enable the
93 regulator driver.
94
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]95config REGULATOR_AB3100
96 tristate "ST-Ericsson AB3100 Regulator functions"
97 depends on AB3100_CORE
98 default y if AB3100_CORE
99 help
100 These regulators correspond to functionality in the
101 AB3100 analog baseband dealing with power regulators
102 for the system.
103
104config REGULATOR_AB8500
105 bool "ST-Ericsson AB8500 Power Regulators"
106 depends on AB8500_CORE
107 help
108 This driver supports the regulators found on the ST-Ericsson mixed
109 signal AB8500 PMIC
110
Mark Brownb667a452012-06-14 18:14:00 +0100[diff] [blame]111config REGULATOR_ARIZONA
112 tristate "Wolfson Arizona class devices"
113 depends on MFD_ARIZONA
Mark Browne6ed9052013-01-10 19:14:11 +0000[diff] [blame]114 depends on SND_SOC
Mark Brownb667a452012-06-14 18:14:00 +0100[diff] [blame]115 help
116 Support for the regulators found on Wolfson Arizona class
117 devices.
118
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]119config REGULATOR_AS3711
120 tristate "AS3711 PMIC"
121 depends on MFD_AS3711
122 help
123 This driver provides support for the voltage regulators on the
124 AS3711 PMIC
125
Laxman Dewanganbc407332013-09-20 18:00:13 +0530[diff] [blame]126config REGULATOR_AS3722
127 tristate "AMS AS3722 PMIC Regulators"
128 depends on MFD_AS3722
129 help
130 This driver provides support for the voltage regulators on the
131 AS3722 PMIC. This will enable support for all the software
132 controllable DCDC/LDO regulators.
133
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]134config REGULATOR_DA903X
135 tristate "Dialog Semiconductor DA9030/DA9034 regulators"
136 depends on PMIC_DA903X
137 help
138 Say y here to support the BUCKs and LDOs regulators found on
139 Dialog Semiconductor DA9030/DA9034 PMIC.
140
141config REGULATOR_DA9052
142 tristate "Dialog Semiconductor DA9052/DA9053 regulators"
143 depends on PMIC_DA9052
144 help
145 This driver supports the voltage regulators of DA9052-BC and
146 DA9053-AA/Bx PMIC.
147
Ashish Jangamf6130be2012-11-01 13:57:56 +0530[diff] [blame]148config REGULATOR_DA9055
149 tristate "Dialog Semiconductor DA9055 regulators"
150 depends on MFD_DA9055
151 help
152 Say y here to support the BUCKs and LDOs regulators found on
153 Dialog Semiconductor DA9055 PMIC.
154
155 This driver can also be built as a module. If so, the module
156 will be called da9055-regulator.
157
Krystian Garbaciak69ca3e52013-07-29 19:00:45 +0200[diff] [blame]158config REGULATOR_DA9063
159 tristate "Dialog Semiconductor DA9063 regulators"
160 depends on MFD_DA9063
161 help
162 Say y here to support the BUCKs and LDOs regulators found on
163 DA9063 PMICs.
164
165 This driver can also be built as a module. If so, the module
166 will be called da9063-regulator.
167
Steve Twiss16f10912013-08-06 15:30:48 +0100[diff] [blame]168config REGULATOR_DA9210
169 tristate "Dialog Semiconductor DA9210 regulator"
170 depends on I2C
171 select REGMAP_I2C
172 help
173 Say y here to support for the Dialog Semiconductor DA9210.
174 The DA9210 is a multi-phase synchronous step down
175 converter 12A DC-DC Buck controlled through an I2C
176 interface.
177
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]178config REGULATOR_DBX500_PRCMU
179 bool
180
181config REGULATOR_DB8500_PRCMU
182 bool "ST-Ericsson DB8500 Voltage Domain Regulators"
183 depends on MFD_DB8500_PRCMU
184 select REGULATOR_DBX500_PRCMU
185 help
186 This driver supports the voltage domain regulators controlled by the
187 DB8500 PRCMU
188
Yunfan Zhang49d8c592012-09-08 03:52:18 -0700[diff] [blame]189config REGULATOR_FAN53555
190 tristate "Fairchild FAN53555 Regulator"
191 depends on I2C
192 select REGMAP_I2C
193 help
194 This driver supports Fairchild FAN53555 Digitally Programmable
195 TinyBuck Regulator. The FAN53555 is a step-down switching voltage
196 regulator that delivers a digitally programmable output from an
197 input voltage supply of 2.5V to 5.5V. The output voltage is
198 programmed through an I2C interface.
199
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]200config REGULATOR_GPIO
201 tristate "GPIO regulator support"
202 depends on GPIOLIB
Ying-Chun Liu (PaulLiu)e3e5aff2012-03-14 10:29:12 +0800[diff] [blame]203 help
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]204 This driver provides support for regulators that can be
205 controlled via gpios.
206 It is capable of supporting current and voltage regulators
207 and the platform has to provide a mapping of GPIO-states
208 to target volts/amps.
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]209
210config REGULATOR_ISL6271A
211 tristate "Intersil ISL6271A Power regulator"
212 depends on I2C
213 help
214 This driver supports ISL6271A voltage regulator chip.
215
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]216config REGULATOR_LP3971
217 tristate "National Semiconductors LP3971 PMIC regulator driver"
218 depends on I2C
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]219 help
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]220 Say Y here to support the voltage regulators and convertors
221 on National Semiconductors LP3971 PMIC
222
223config REGULATOR_LP3972
224 tristate "National Semiconductors LP3972 PMIC regulator driver"
225 depends on I2C
226 help
227 Say Y here to support the voltage regulators and convertors
228 on National Semiconductors LP3972 PMIC
229
230config REGULATOR_LP872X
Mark Brown631a1fc2013-07-29 16:49:46 +0100[diff] [blame]231 tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators"
Axel Lin613965f2013-08-30 22:13:44 +0800[diff] [blame]232 depends on I2C
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]233 select REGMAP_I2C
234 help
235 This driver supports LP8720/LP8725 PMIC
236
237config REGULATOR_LP8755
238 tristate "TI LP8755 High Performance PMU driver"
239 depends on I2C
240 select REGMAP_I2C
241 help
242 This driver supports LP8755 High Performance PMU driver. This
243 chip contains six step-down DC/DC converters which can support
244 9 mode multiphase configuration.
245
246config REGULATOR_LP8788
Mark Brown631a1fc2013-07-29 16:49:46 +0100[diff] [blame]247 tristate "TI LP8788 Power Regulators"
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]248 depends on MFD_LP8788
249 help
250 This driver supports LP8788 voltage regulator chip.
Philipp Zabel0eb5d5a2008-07-11 17:28:06 +0200[diff] [blame]251
Robert Jarzmik55f4fa42009-04-23 20:10:43 +0200[diff] [blame]252config REGULATOR_MAX1586
253 tristate "Maxim 1586/1587 voltage regulator"
254 depends on I2C
Robert Jarzmik55f4fa42009-04-23 20:10:43 +0200[diff] [blame]255 help
256 This driver controls a Maxim 1586 or 1587 voltage output
257 regulator via I2C bus. The provided regulator is suitable
258 for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
259
Haojian Zhuanga71b7972010-01-25 10:24:09 -0500[diff] [blame]260config REGULATOR_MAX8649
261 tristate "Maxim 8649 voltage regulator"
262 depends on I2C
Jonghwan Choic5b68d472011-10-24 22:26:26 +0900[diff] [blame]263 select REGMAP_I2C
Haojian Zhuanga71b7972010-01-25 10:24:09 -0500[diff] [blame]264 help
265 This driver controls a Maxim 8649 voltage output regulator via
266 I2C bus.
267
Wolfram Sang27f37e42009-09-25 09:39:26 +0200[diff] [blame]268config REGULATOR_MAX8660
269 tristate "Maxim 8660/8661 voltage regulator"
270 depends on I2C
271 help
272 This driver controls a Maxim 8660/8661 voltage output
273 regulator via I2C bus.
274
Gyungoh Yooffee1902012-08-09 14:24:34 -0600[diff] [blame]275config REGULATOR_MAX8907
276 tristate "Maxim 8907 voltage regulator"
277 depends on MFD_MAX8907
278 help
279 This driver controls a Maxim 8907 voltage output regulator
280 via I2C bus. The provided regulator is suitable for Tegra
281 chip to control Step-Down DC-DC and LDOs.
282
Haojian Zhuang08ff6f22010-01-11 13:10:08 +0100[diff] [blame]283config REGULATOR_MAX8925
284 tristate "Maxim MAX8925 Power Management IC"
285 depends on MFD_MAX8925
286 help
287 Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.
288
MyungJoo Ham202f4f52010-08-20 14:43:56 +0900[diff] [blame]289config REGULATOR_MAX8952
290 tristate "Maxim MAX8952 Power Management IC"
291 depends on I2C
292 help
293 This driver controls a Maxim 8952 voltage output regulator
294 via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
295 modes ranging from 0.77V to 1.40V by 0.01V steps.
296
Laxman Dewangan5928f532012-11-19 06:58:29 +0530[diff] [blame]297config REGULATOR_MAX8973
298 tristate "Maxim MAX8973 voltage regulator "
299 depends on I2C
300 select REGMAP_I2C
301 help
302 The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down
303 switching regulator delievers up to 9A of output current. Each
304 phase operates at a 2MHz fixed frequency with a 120 deg shift
305 from the adjacent phase, allowing the use of small magnetic component.
306
MyungJoo Hambd6ca2c2011-03-11 11:34:44 +0900[diff] [blame]307config REGULATOR_MAX8997
308 tristate "Maxim 8997/8966 regulator"
309 depends on MFD_MAX8997
310 help
311 This driver controls a Maxim 8997/8966 regulator
312 via I2C bus. The provided regulator is suitable for S5PC110,
313 S5PV210, and Exynos-4 chips to control VCC_CORE and
314 VCC_USIM voltages.
315
Kyungmin Park156f2522010-06-16 09:04:16 +0200[diff] [blame]316config REGULATOR_MAX8998
317 tristate "Maxim 8998 voltage regulator"
Marek Szyprowski69f71002010-06-21 10:04:23 +0200[diff] [blame]318 depends on MFD_MAX8998
Kyungmin Park156f2522010-06-16 09:04:16 +0200[diff] [blame]319 help
320 This driver controls a Maxim 8998 voltage output regulator
321 via I2C bus. The provided regulator is suitable for S3C6410
322 and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
323
Jonghwa Lee133d4012012-06-01 13:17:14 +0900[diff] [blame]324config REGULATOR_MAX77686
325 tristate "Maxim 77686 regulator"
326 depends on MFD_MAX77686
327 help
328 This driver controls a Maxim 77686 regulator
329 via I2C bus. The provided regulator is suitable for
330 Exynos-4 chips to control VARM and VINT voltages.
331
Jonghwa Lee80b022e2013-06-25 10:08:38 +0900[diff] [blame]332config REGULATOR_MAX77693
333 tristate "Maxim MAX77693 regulator"
334 depends on MFD_MAX77693
335 help
336 This driver controls a Maxim 77693 regulator via I2C bus.
337 The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2'
338 and one current regulator 'CHARGER'. This is suitable for
339 Exynos-4x12 chips.
340
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]341config REGULATOR_MC13XXX_CORE
342 tristate
343
344config REGULATOR_MC13783
345 tristate "Freescale MC13783 regulator driver"
346 depends on MFD_MC13783
347 select REGULATOR_MC13XXX_CORE
348 help
349 Say y here to support the regulators found on the Freescale MC13783
350 PMIC.
351
352config REGULATOR_MC13892
353 tristate "Freescale MC13892 regulator driver"
354 depends on MFD_MC13XXX
355 select REGULATOR_MC13XXX_CORE
356 help
357 Say y here to support the regulators found on the Freescale MC13892
358 PMIC.
359
360config REGULATOR_PALMAS
361 tristate "TI Palmas PMIC Regulators"
362 depends on MFD_PALMAS
363 help
364 If you wish to control the regulators on the Palmas series of
365 chips say Y here. This will enable support for all the software
366 controllable SMPS/LDO regulators.
367
368 The regulators available on Palmas series chips vary depending
369 on the muxing. This is handled automatically in the driver by
370 reading the mux info from OTP.
371
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]372config REGULATOR_PCAP
373 tristate "Motorola PCAP2 regulator driver"
374 depends on EZX_PCAP
Sangbeom Kim62aa4922012-01-13 10:13:13 +0900[diff] [blame]375 help
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]376 This driver provides support for the voltage regulators of the
377 PCAP2 PMIC.
Balaji Rao5ec271e2009-01-09 01:51:01 +0100[diff] [blame]378
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]379config REGULATOR_PCF50633
380 tristate "NXP PCF50633 regulator driver"
Michael Jonesc6d678b2012-07-26 16:07:23 +0200[diff] [blame]381 depends on MFD_PCF50633
Daniel Ribeiro39b17722009-06-27 00:18:02 -0300[diff] [blame]382 help
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]383 Say Y here to support the voltage regulators and convertors
384 on PCF50633
Daniel Ribeiro39b17722009-06-27 00:18:02 -0300[diff] [blame]385
Robin Gong3784b6d2013-07-25 11:33:18 +0800[diff] [blame]386config REGULATOR_PFUZE100
387 tristate "Support regulators on Freescale PFUZE100 PMIC"
388 depends on I2C
Axel Lin94421b02013-07-29 12:08:01 +0800[diff] [blame]389 select REGMAP_I2C
Robin Gong3784b6d2013-07-25 11:33:18 +0800[diff] [blame]390 help
391 Say y here to support the regulators found on the Freescale PFUZE100
392 PMIC.
393
Laxman Dewangan6ffc3272012-04-04 12:44:00 +0530[diff] [blame]394config REGULATOR_RC5T583
395 tristate "RICOH RC5T583 Power regulators"
396 depends on MFD_RC5T583
397 help
398 Select this option to enable the power regulator of RICOH
399 PMIC RC5T583.
400 This driver supports the control of different power rails of device
401 through regulator interface. The device supports multiple DCDC/LDO
402 outputs which can be controlled by i2c communication.
403
Sangbeom Kimcb746852012-07-11 21:08:17 +0900[diff] [blame]404config REGULATOR_S2MPS11
405 tristate "Samsung S2MPS11 voltage regulator"
406 depends on MFD_SEC_CORE
407 help
408 This driver supports a Samsung S2MPS11 voltage output regulator
409 via I2C bus. S2MPS11 is comprised of high efficient Buck converters
410 including Dual-Phase Buck converter, Buck-Boost converter, various LDOs.
411
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]412config REGULATOR_S5M8767
413 tristate "Samsung S5M8767A voltage regulator"
Sangbeom Kim66c9fbb2012-07-11 21:06:40 +0900[diff] [blame]414 depends on MFD_SEC_CORE
Sascha Hauer295c08b2009-08-19 01:43:50 +0200[diff] [blame]415 help
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]416 This driver supports a Samsung S5M8767A voltage output regulator
417 via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
418 supports DVS mode with 8bits of output voltage control.
Yong Shen5e428d52010-12-14 14:00:55 +0800[diff] [blame]419
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]420config REGULATOR_TI_ABB
Mark Brown631a1fc2013-07-29 16:49:46 +0100[diff] [blame]421 tristate "TI Adaptive Body Bias on-chip LDO"
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]422 depends on ARCH_OMAP
Linus Walleijd619bc12009-09-09 11:31:00 +0200[diff] [blame]423 help
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]424 Select this option to support Texas Instruments' on-chip Adaptive Body
425 Bias (ABB) LDO regulators. It is recommended that this option be
426 enabled on required TI SoC. Certain Operating Performance Points
427 on TI SoCs may be unstable without enabling this as it provides
428 device specific optimized bias to allow/optimize functionality.
Graeme Gregory4c5dabc2012-05-15 15:48:59 +0900[diff] [blame]429
Linus Walleij3615a342013-09-13 21:01:15 +0200[diff] [blame]430config REGULATOR_STW481X_VMMC
431 bool "ST Microelectronics STW481X VMMC regulator"
432 depends on MFD_STW481X
433 default y if MFD_STW481X
434 help
435 This driver supports the internal VMMC regulator in the STw481x
436 PMIC chips.
437
Laxman Dewangan0c570672012-10-06 20:47:46 +0530[diff] [blame]438config REGULATOR_TPS51632
439 tristate "TI TPS51632 Power Regulator"
440 depends on I2C
441 select REGMAP_I2C
442 help
443 This driver supports TPS51632 voltage regulator chip.
Axel Lin7bde7672012-11-01 14:02:36 +0800[diff] [blame]444 The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller
Laxman Dewangan0c570672012-10-06 20:47:46 +0530[diff] [blame]445 with Serial VID control and DVFS.
446 The voltage output can be configure through I2C interface or PWM
447 interface.
448
Linus Walleij2edd3b62011-03-09 12:02:55 +0000[diff] [blame]449config REGULATOR_TPS6105X
450 tristate "TI TPS6105X Power regulators"
451 depends on TPS6105X
452 default y if TPS6105X
453 help
454 This driver supports TPS61050/TPS61052 voltage regulator chips.
455 It is a single boost converter primarily for white LEDs and
456 audio amplifiers.
457
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]458config REGULATOR_TPS62360
Axel Lind1cf4f62012-04-02 18:19:28 +0800[diff] [blame]459 tristate "TI TPS6236x Power Regulator"
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]460 depends on I2C
461 select REGMAP_I2C
462 help
Axel Lind1cf4f62012-04-02 18:19:28 +0800[diff] [blame]463 This driver supports TPS6236x voltage regulator chip. This
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]464 regulator is meant for processor core supply. This chip is
465 high-frequency synchronous step down dc-dc converter optimized
466 for battery-powered portable applications.
467
Anuj Aggarwal2de79852009-08-21 00:39:44 +0530[diff] [blame]468config REGULATOR_TPS65023
469 tristate "TI TPS65023 Power regulators"
470 depends on I2C
Mark Brown90923352011-06-18 01:18:51 +0100[diff] [blame]471 select REGMAP_I2C
Anuj Aggarwal2de79852009-08-21 00:39:44 +0530[diff] [blame]472 help
473 This driver supports TPS65023 voltage regulator chips. TPS65023 provides
474 three step-down converters and two general-purpose LDO voltage regulators.
475 It supports TI's software based Class-2 SmartReflex implementation.
476
477config REGULATOR_TPS6507X
478 tristate "TI TPS6507X Power regulators"
479 depends on I2C
480 help
481 This driver supports TPS6507X voltage regulator chips. TPS6507X provides
482 three step-down converters and two general-purpose LDO voltage regulators.
483 It supports TI's software based Class-2 SmartReflex implementation.
484
Venu Byravarasu452534e2012-03-22 18:34:09 +0530[diff] [blame]485config REGULATOR_TPS65090
486 tristate "TI TPS65090 Power regulator"
487 depends on MFD_TPS65090
488 help
489 This driver provides support for the voltage regulators on the
490 TI TPS65090 PMIC.
491
AnilKumar Cha4930772012-01-11 16:11:49 +0530[diff] [blame]492config REGULATOR_TPS65217
493 tristate "TI TPS65217 Power regulators"
494 depends on MFD_TPS65217
495 help
496 This driver supports TPS65217 voltage regulator chips. TPS65217
497 provides three step-down converters and four general-purpose LDO
498 voltage regulators. It supports software based voltage control
499 for different voltage domains
500
Cyril Chemparathy1394fd22010-12-07 12:04:11 -0500[diff] [blame]501config REGULATOR_TPS6524X
502 tristate "TI TPS6524X Power regulators"
503 depends on SPI
504 help
505 This driver supports TPS6524X voltage regulator chips. TPS6524X
506 provides three step-down converters and two general-purpose LDO
507 voltage regulators. This device is interfaced using a customized
508 serial interface currently supported on the sequencer serial
509 port controller.
510
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]511config REGULATOR_TPS6586X
512 tristate "TI TPS6586X Power regulators"
513 depends on MFD_TPS6586X
514 help
515 This driver supports TPS6586X voltage regulator chips.
516
Graeme Gregory518fb722011-05-02 16:20:08 -0500[diff] [blame]517config REGULATOR_TPS65910
Axel Linae0e6542012-02-21 10:14:55 +0800[diff] [blame]518 tristate "TI TPS65910/TPS65911 Power Regulators"
Graeme Gregory518fb722011-05-02 16:20:08 -0500[diff] [blame]519 depends on MFD_TPS65910
520 help
Axel Linae0e6542012-02-21 10:14:55 +0800[diff] [blame]521 This driver supports TPS65910/TPS65911 voltage regulator chips.
Graeme Gregory518fb722011-05-02 16:20:08 -0500[diff] [blame]522
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]523config REGULATOR_TPS65912
524 tristate "TI TPS65912 Power regulator"
525 depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
Laxman Dewangan62199292012-01-09 20:27:41 +0530[diff] [blame]526 help
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]527 This driver supports TPS65912 voltage regulator chip.
Laxman Dewangan62199292012-01-09 20:27:41 +0530[diff] [blame]528
Laxman Dewangan1a0bb672012-11-11 20:42:01 +0530[diff] [blame]529config REGULATOR_TPS80031
530 tristate "TI TPS80031/TPS80032 power regualtor driver"
531 depends on MFD_TPS80031
532 help
533 TPS80031/ TPS80032 Fully Integrated Power Management with Power
534 Path and Battery Charger. It has 5 configurable step-down
535 converters, 11 general purpose LDOs, VBUS generator and digital
536 output to control regulators.
537
Mark Brownda091552008-10-10 15:58:15 +0100[diff] [blame]538config REGULATOR_TWL4030
Mark Brown631a1fc2013-07-29 16:49:46 +0100[diff] [blame]539 tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
Mark Brownda091552008-10-10 15:58:15 +0100[diff] [blame]540 depends on TWL4030_CORE
Mark Brownda091552008-10-10 15:58:15 +0100[diff] [blame]541 help
542 This driver supports the voltage regulators provided by
543 this family of companion chips.
544
Pawel Moll31e54082012-09-24 18:56:54 +0100[diff] [blame]545config REGULATOR_VEXPRESS
546 tristate "Versatile Express regulators"
547 depends on VEXPRESS_CONFIG
548 help
549 This driver provides support for voltage regulators available
550 on the ARM Ltd's Versatile Express platform.
551
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]552config REGULATOR_WM831X
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]553 tristate "Wolfson Microelectronics WM831x PMIC regulators"
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]554 depends on MFD_WM831X
555 help
556 Support the voltage and current regulators of the WM831x series
557 of PMIC devices.
558
Mark Brown42fad572008-09-11 11:12:01 +0100[diff] [blame]559config REGULATOR_WM8350
560 tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
561 depends on MFD_WM8350
Mark Brown42fad572008-09-11 11:12:01 +0100[diff] [blame]562 help
563 This driver provides support for the voltage and current regulators
Michael Jonesc6d678b2012-07-26 16:07:23 +0200[diff] [blame]564 of the WM8350 AudioPlus PMIC.
Mark Brown42fad572008-09-11 11:12:01 +0100[diff] [blame]565
566config REGULATOR_WM8400
567 tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
568 depends on MFD_WM8400
569 help
570 This driver provides support for the voltage regulators of the
571 WM8400 AudioPlus PMIC.
Mark Brownda091552008-10-10 15:58:15 +0100[diff] [blame]572
Eric Miao129eef92008-08-27 04:16:08 +0800[diff] [blame]573config REGULATOR_WM8994
574 tristate "Wolfson Microelectronics WM8994 CODEC"
575 depends on MFD_WM8994
Eric Miao129eef92008-08-27 04:16:08 +0800[diff] [blame]576 help
577 This driver provides support for the voltage regulators on the
578 WM8994 CODEC.
579
Takashi Iwaibbda14d2008-10-30 15:57:05 +0100[diff] [blame]580endif
Sascha Hauer295c08b2009-08-19 01:43:50 +0200[diff] [blame]581