blob: 3d50fb4236edfa158d15328168f13826db243504 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
Uwe Zeisbergerf30c2262006-10-03 23:01:26 +02002 * sound/oss/sb_common.c
Linus Torvalds1da177e2005-04-16 15:20:36 -07003 *
4 * Common routines for Sound Blaster compatible cards.
5 *
6 *
7 * Copyright (C) by Hannu Savolainen 1993-1997
8 *
9 * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
10 * Version 2 (June 1991). See the "COPYING" file distributed with this software
11 * for more info.
12 *
13 *
14 * Daniel J. Rodriksson: Modified sbintr to handle 8 and 16 bit interrupts
15 * for full duplex support ( only sb16 by now )
16 * Rolf Fokkens: Added (BETA?) support for ES1887 chips.
17 * (fokkensr@vertis.nl) Which means: You can adjust the recording levels.
18 *
19 * 2000/01/18 - separated sb_card and sb_common -
20 * Jeff Garzik <jgarzik@pobox.com>
21 *
22 * 2000/09/18 - got rid of attach_uart401
23 * Arnaldo Carvalho de Melo <acme@conectiva.com.br>
24 *
25 * 2001/01/26 - replaced CLI/STI with spinlocks
26 * Chris Rankin <rankinc@zipworld.com.au>
27 */
28
Linus Torvalds1da177e2005-04-16 15:20:36 -070029#include <linux/init.h>
30#include <linux/interrupt.h>
31#include <linux/module.h>
32#include <linux/delay.h>
33#include <linux/spinlock.h>
Tejun Heo5a0e3ad2010-03-24 17:04:11 +090034#include <linux/slab.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070035
36#include "sound_config.h"
37#include "sound_firmware.h"
38
39#include "mpu401.h"
40
41#include "sb_mixer.h"
42#include "sb.h"
43#include "sb_ess.h"
44
45/*
46 * global module flag
47 */
48
49int sb_be_quiet;
50
51static sb_devc *detected_devc; /* For communication from probe to init */
52static sb_devc *last_devc; /* For MPU401 initialization */
53
54static unsigned char jazz_irq_bits[] = {
55 0, 0, 2, 3, 0, 1, 0, 4, 0, 2, 5, 0, 0, 0, 0, 6
56};
57
58static unsigned char jazz_dma_bits[] = {
59 0, 1, 0, 2, 0, 3, 0, 4
60};
61
62void *smw_free;
63
64/*
65 * Jazz16 chipset specific control variables
66 */
67
68static int jazz16_base; /* Not detected */
69static unsigned char jazz16_bits; /* I/O relocation bits */
70static DEFINE_SPINLOCK(jazz16_lock);
71
72/*
73 * Logitech Soundman Wave specific initialization code
74 */
75
76#ifdef SMW_MIDI0001_INCLUDED
77#include "smw-midi0001.h"
78#else
79static unsigned char *smw_ucode;
80static int smw_ucodeLen;
81
82#endif
83
84static sb_devc *last_sb; /* Last sb loaded */
85
86int sb_dsp_command(sb_devc * devc, unsigned char val)
87{
88 int i;
89 unsigned long limit;
90
91 limit = jiffies + HZ / 10; /* Timeout */
92
93 /*
94 * Note! the i<500000 is an emergency exit. The sb_dsp_command() is sometimes
95 * called while interrupts are disabled. This means that the timer is
96 * disabled also. However the timeout situation is a abnormal condition.
97 * Normally the DSP should be ready to accept commands after just couple of
98 * loops.
99 */
100
101 for (i = 0; i < 500000 && (limit-jiffies)>0; i++)
102 {
103 if ((inb(DSP_STATUS) & 0x80) == 0)
104 {
105 outb((val), DSP_COMMAND);
106 return 1;
107 }
108 }
109 printk(KERN_WARNING "Sound Blaster: DSP command(%x) timeout.\n", val);
110 return 0;
111}
112
113int sb_dsp_get_byte(sb_devc * devc)
114{
115 int i;
116
117 for (i = 1000; i; i--)
118 {
119 if (inb(DSP_DATA_AVAIL) & 0x80)
120 return inb(DSP_READ);
121 }
122 return 0xffff;
123}
124
125static void sb_intr (sb_devc *devc)
126{
127 int status;
128 unsigned char src = 0xff;
129
130 if (devc->model == MDL_SB16)
131 {
132 src = sb_getmixer(devc, IRQ_STAT); /* Interrupt source register */
133
134 if (src & 4) /* MPU401 interrupt */
135 if(devc->midi_irq_cookie)
David Howells7d12e782006-10-05 14:55:46 +0100136 uart401intr(devc->irq, devc->midi_irq_cookie);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700137
138 if (!(src & 3))
139 return; /* Not a DSP interrupt */
140 }
141 if (devc->intr_active && (!devc->fullduplex || (src & 0x01)))
142 {
143 switch (devc->irq_mode)
144 {
145 case IMODE_OUTPUT:
146 DMAbuf_outputintr(devc->dev, 1);
147 break;
148
149 case IMODE_INPUT:
150 DMAbuf_inputintr(devc->dev);
151 break;
152
153 case IMODE_INIT:
154 break;
155
156 case IMODE_MIDI:
157 sb_midi_interrupt(devc);
158 break;
159
160 default:
Randy Dunlapf702cf42009-11-04 16:04:52 -0800161 /* printk(KERN_WARNING "Sound Blaster: Unexpected interrupt\n"); */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700162 ;
163 }
164 }
165 else if (devc->intr_active_16 && (src & 0x02))
166 {
167 switch (devc->irq_mode_16)
168 {
169 case IMODE_OUTPUT:
170 DMAbuf_outputintr(devc->dev, 1);
171 break;
172
173 case IMODE_INPUT:
174 DMAbuf_inputintr(devc->dev);
175 break;
176
177 case IMODE_INIT:
178 break;
179
180 default:
Randy Dunlapf702cf42009-11-04 16:04:52 -0800181 /* printk(KERN_WARNING "Sound Blaster: Unexpected interrupt\n"); */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700182 ;
183 }
184 }
185 /*
186 * Acknowledge interrupts
187 */
188
189 if (src & 0x01)
190 status = inb(DSP_DATA_AVAIL);
191
192 if (devc->model == MDL_SB16 && src & 0x02)
193 status = inb(DSP_DATA_AVL16);
194}
195
196static void pci_intr(sb_devc *devc)
197{
198 int src = inb(devc->pcibase+0x1A);
199 src&=3;
200 if(src)
201 sb_intr(devc);
202}
203
David Howells7d12e782006-10-05 14:55:46 +0100204static irqreturn_t sbintr(int irq, void *dev_id)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700205{
206 sb_devc *devc = dev_id;
207
208 devc->irq_ok = 1;
209
210 switch (devc->model) {
211 case MDL_ESSPCI:
212 pci_intr (devc);
213 break;
214
215 case MDL_ESS:
216 ess_intr (devc);
217 break;
218 default:
219 sb_intr (devc);
220 break;
221 }
222 return IRQ_HANDLED;
223}
224
225int sb_dsp_reset(sb_devc * devc)
226{
227 int loopc;
228
Linus Torvalds1da177e2005-04-16 15:20:36 -0700229 if (devc->model == MDL_ESS) return ess_dsp_reset (devc);
230
231 /* This is only for non-ESS chips */
232
233 outb(1, DSP_RESET);
234
235 udelay(10);
236 outb(0, DSP_RESET);
237 udelay(30);
238
239 for (loopc = 0; loopc < 1000 && !(inb(DSP_DATA_AVAIL) & 0x80); loopc++);
240
241 if (inb(DSP_READ) != 0xAA)
242 {
243 DDB(printk("sb: No response to RESET\n"));
244 return 0; /* Sorry */
245 }
246
Linus Torvalds1da177e2005-04-16 15:20:36 -0700247 return 1;
248}
249
250static void dsp_get_vers(sb_devc * devc)
251{
252 int i;
253
254 unsigned long flags;
255
256 DDB(printk("Entered dsp_get_vers()\n"));
257 spin_lock_irqsave(&devc->lock, flags);
258 devc->major = devc->minor = 0;
259 sb_dsp_command(devc, 0xe1); /* Get version */
260
261 for (i = 100000; i; i--)
262 {
263 if (inb(DSP_DATA_AVAIL) & 0x80)
264 {
265 if (devc->major == 0)
266 devc->major = inb(DSP_READ);
267 else
268 {
269 devc->minor = inb(DSP_READ);
270 break;
271 }
272 }
273 }
274 spin_unlock_irqrestore(&devc->lock, flags);
275 DDB(printk("DSP version %d.%02d\n", devc->major, devc->minor));
276}
277
278static int sb16_set_dma_hw(sb_devc * devc)
279{
280 int bits;
281
282 if (devc->dma8 != 0 && devc->dma8 != 1 && devc->dma8 != 3)
283 {
284 printk(KERN_ERR "SB16: Invalid 8 bit DMA (%d)\n", devc->dma8);
285 return 0;
286 }
287 bits = (1 << devc->dma8);
288
289 if (devc->dma16 >= 5 && devc->dma16 <= 7)
290 bits |= (1 << devc->dma16);
291
292 sb_setmixer(devc, DMA_NR, bits);
293 return 1;
294}
295
296static void sb16_set_mpu_port(sb_devc * devc, struct address_info *hw_config)
297{
298 /*
299 * This routine initializes new MIDI port setup register of SB Vibra (CT2502).
300 */
301 unsigned char bits = sb_getmixer(devc, 0x84) & ~0x06;
302
303 switch (hw_config->io_base)
304 {
305 case 0x300:
306 sb_setmixer(devc, 0x84, bits | 0x04);
307 break;
308
309 case 0x330:
310 sb_setmixer(devc, 0x84, bits | 0x00);
311 break;
312
313 default:
314 sb_setmixer(devc, 0x84, bits | 0x02); /* Disable MPU */
315 printk(KERN_ERR "SB16: Invalid MIDI I/O port %x\n", hw_config->io_base);
316 }
317}
318
319static int sb16_set_irq_hw(sb_devc * devc, int level)
320{
321 int ival;
322
323 switch (level)
324 {
325 case 5:
326 ival = 2;
327 break;
328 case 7:
329 ival = 4;
330 break;
331 case 9:
332 ival = 1;
333 break;
334 case 10:
335 ival = 8;
336 break;
337 default:
338 printk(KERN_ERR "SB16: Invalid IRQ%d\n", level);
339 return 0;
340 }
341 sb_setmixer(devc, IRQ_NR, ival);
342 return 1;
343}
344
345static void relocate_Jazz16(sb_devc * devc, struct address_info *hw_config)
346{
347 unsigned char bits = 0;
348 unsigned long flags;
349
350 if (jazz16_base != 0 && jazz16_base != hw_config->io_base)
351 return;
352
353 switch (hw_config->io_base)
354 {
355 case 0x220:
356 bits = 1;
357 break;
358 case 0x240:
359 bits = 2;
360 break;
361 case 0x260:
362 bits = 3;
363 break;
364 default:
365 return;
366 }
367 bits = jazz16_bits = bits << 5;
368 jazz16_base = hw_config->io_base;
369
370 /*
371 * Magic wake up sequence by writing to 0x201 (aka Joystick port)
372 */
373 spin_lock_irqsave(&jazz16_lock, flags);
374 outb((0xAF), 0x201);
375 outb((0x50), 0x201);
376 outb((bits), 0x201);
377 spin_unlock_irqrestore(&jazz16_lock, flags);
378}
379
380static int init_Jazz16(sb_devc * devc, struct address_info *hw_config)
381{
382 char name[100];
383 /*
384 * First try to check that the card has Jazz16 chip. It identifies itself
385 * by returning 0x12 as response to DSP command 0xfa.
386 */
387
388 if (!sb_dsp_command(devc, 0xfa))
389 return 0;
390
391 if (sb_dsp_get_byte(devc) != 0x12)
392 return 0;
393
394 /*
395 * OK so far. Now configure the IRQ and DMA channel used by the card.
396 */
397 if (hw_config->irq < 1 || hw_config->irq > 15 || jazz_irq_bits[hw_config->irq] == 0)
398 {
399 printk(KERN_ERR "Jazz16: Invalid interrupt (IRQ%d)\n", hw_config->irq);
400 return 0;
401 }
402 if (hw_config->dma < 0 || hw_config->dma > 3 || jazz_dma_bits[hw_config->dma] == 0)
403 {
404 printk(KERN_ERR "Jazz16: Invalid 8 bit DMA (DMA%d)\n", hw_config->dma);
405 return 0;
406 }
407 if (hw_config->dma2 < 0)
408 {
409 printk(KERN_ERR "Jazz16: No 16 bit DMA channel defined\n");
410 return 0;
411 }
412 if (hw_config->dma2 < 5 || hw_config->dma2 > 7 || jazz_dma_bits[hw_config->dma2] == 0)
413 {
414 printk(KERN_ERR "Jazz16: Invalid 16 bit DMA (DMA%d)\n", hw_config->dma2);
415 return 0;
416 }
417 devc->dma16 = hw_config->dma2;
418
419 if (!sb_dsp_command(devc, 0xfb))
420 return 0;
421
422 if (!sb_dsp_command(devc, jazz_dma_bits[hw_config->dma] |
423 (jazz_dma_bits[hw_config->dma2] << 4)))
424 return 0;
425
426 if (!sb_dsp_command(devc, jazz_irq_bits[hw_config->irq]))
427 return 0;
428
429 /*
430 * Now we have configured a standard Jazz16 device.
431 */
432 devc->model = MDL_JAZZ;
433 strcpy(name, "Jazz16");
434
435 hw_config->name = "Jazz16";
436 devc->caps |= SB_NO_MIDI;
437 return 1;
438}
439
440static void relocate_ess1688(sb_devc * devc)
441{
442 unsigned char bits;
443
444 switch (devc->base)
445 {
446 case 0x220:
447 bits = 0x04;
448 break;
449 case 0x230:
450 bits = 0x05;
451 break;
452 case 0x240:
453 bits = 0x06;
454 break;
455 case 0x250:
456 bits = 0x07;
457 break;
458 default:
459 return; /* Wrong port */
460 }
461
462 DDB(printk("Doing ESS1688 address selection\n"));
463
464 /*
465 * ES1688 supports two alternative ways for software address config.
466 * First try the so called Read-Sequence-Key method.
467 */
468
469 /* Reset the sequence logic */
470 inb(0x229);
471 inb(0x229);
472 inb(0x229);
473
474 /* Perform the read sequence */
475 inb(0x22b);
476 inb(0x229);
477 inb(0x22b);
478 inb(0x229);
479 inb(0x229);
480 inb(0x22b);
481 inb(0x229);
482
483 /* Select the base address by reading from it. Then probe using the port. */
484 inb(devc->base);
485 if (sb_dsp_reset(devc)) /* Bingo */
486 return;
487
488#if 0 /* This causes system lockups (Nokia 386/25 at least) */
489 /*
490 * The last resort is the system control register method.
491 */
492
493 outb((0x00), 0xfb); /* 0xFB is the unlock register */
494 outb((0x00), 0xe0); /* Select index 0 */
495 outb((bits), 0xe1); /* Write the config bits */
496 outb((0x00), 0xf9); /* 0xFB is the lock register */
497#endif
498}
499
500int sb_dsp_detect(struct address_info *hw_config, int pci, int pciio, struct sb_module_options *sbmo)
501{
502 sb_devc sb_info;
503 sb_devc *devc = &sb_info;
504
505 memset((char *) &sb_info, 0, sizeof(sb_info)); /* Zero everything */
506
507 /* Copy module options in place */
508 if(sbmo) memcpy(&devc->sbmo, sbmo, sizeof(struct sb_module_options));
509
510 sb_info.my_mididev = -1;
511 sb_info.my_mixerdev = -1;
512 sb_info.dev = -1;
513
514 /*
515 * Initialize variables
516 */
517
518 DDB(printk("sb_dsp_detect(%x) entered\n", hw_config->io_base));
519
520 spin_lock_init(&devc->lock);
521 devc->type = hw_config->card_subtype;
522
523 devc->base = hw_config->io_base;
524 devc->irq = hw_config->irq;
525 devc->dma8 = hw_config->dma;
526
527 devc->dma16 = -1;
528 devc->pcibase = pciio;
529
530 if(pci == SB_PCI_ESSMAESTRO)
531 {
532 devc->model = MDL_ESSPCI;
533 devc->caps |= SB_PCI_IRQ;
534 hw_config->driver_use_1 |= SB_PCI_IRQ;
535 hw_config->card_subtype = MDL_ESSPCI;
536 }
537
538 if(pci == SB_PCI_YAMAHA)
539 {
540 devc->model = MDL_YMPCI;
541 devc->caps |= SB_PCI_IRQ;
542 hw_config->driver_use_1 |= SB_PCI_IRQ;
543 hw_config->card_subtype = MDL_YMPCI;
544
545 printk("Yamaha PCI mode.\n");
546 }
547
548 if (devc->sbmo.acer)
549 {
550 unsigned long flags;
551
552 spin_lock_irqsave(&devc->lock, flags);
553 inb(devc->base + 0x09);
554 inb(devc->base + 0x09);
555 inb(devc->base + 0x09);
556 inb(devc->base + 0x0b);
557 inb(devc->base + 0x09);
558 inb(devc->base + 0x0b);
559 inb(devc->base + 0x09);
560 inb(devc->base + 0x09);
561 inb(devc->base + 0x0b);
562 inb(devc->base + 0x09);
563 inb(devc->base + 0x00);
564 spin_unlock_irqrestore(&devc->lock, flags);
565 }
566 /*
567 * Detect the device
568 */
569
570 if (sb_dsp_reset(devc))
571 dsp_get_vers(devc);
572 else
573 devc->major = 0;
574
575 if (devc->type == 0 || devc->type == MDL_JAZZ || devc->type == MDL_SMW)
576 if (devc->major == 0 || (devc->major == 3 && devc->minor == 1))
577 relocate_Jazz16(devc, hw_config);
578
579 if (devc->major == 0 && (devc->type == MDL_ESS || devc->type == 0))
580 relocate_ess1688(devc);
581
582 if (!sb_dsp_reset(devc))
583 {
584 DDB(printk("SB reset failed\n"));
585#ifdef MODULE
586 printk(KERN_INFO "sb: dsp reset failed.\n");
587#endif
588 return 0;
589 }
590 if (devc->major == 0)
591 dsp_get_vers(devc);
592
593 if (devc->major == 3 && devc->minor == 1)
594 {
595 if (devc->type == MDL_AZTECH) /* SG Washington? */
596 {
597 if (sb_dsp_command(devc, 0x09))
598 if (sb_dsp_command(devc, 0x00)) /* Enter WSS mode */
599 {
600 int i;
601
602 /* Have some delay */
603 for (i = 0; i < 10000; i++)
604 inb(DSP_DATA_AVAIL);
605 devc->caps = SB_NO_AUDIO | SB_NO_MIDI; /* Mixer only */
606 devc->model = MDL_AZTECH;
607 }
608 }
609 }
610
611 if(devc->type == MDL_ESSPCI)
612 devc->model = MDL_ESSPCI;
613
614 if(devc->type == MDL_YMPCI)
615 {
616 printk("YMPCI selected\n");
617 devc->model = MDL_YMPCI;
618 }
619
620 /*
621 * Save device information for sb_dsp_init()
622 */
623
624
Alexandru Gheorghiub8e63df2013-03-25 15:50:34 +0200625 detected_devc = kmemdup(devc, sizeof(sb_devc), GFP_KERNEL);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700626 if (detected_devc == NULL)
627 {
628 printk(KERN_ERR "sb: Can't allocate memory for device information\n");
629 return 0;
630 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700631 MDB(printk(KERN_INFO "SB %d.%02d detected OK (%x)\n", devc->major, devc->minor, hw_config->io_base));
632 return 1;
633}
634
635int sb_dsp_init(struct address_info *hw_config, struct module *owner)
636{
637 sb_devc *devc;
638 char name[100];
639 extern int sb_be_quiet;
640 int mixer22, mixer30;
641
642/*
643 * Check if we had detected a SB device earlier
644 */
645 DDB(printk("sb_dsp_init(%x) entered\n", hw_config->io_base));
646 name[0] = 0;
647
648 if (detected_devc == NULL)
649 {
650 MDB(printk("No detected device\n"));
651 return 0;
652 }
653 devc = detected_devc;
654 detected_devc = NULL;
655
656 if (devc->base != hw_config->io_base)
657 {
658 DDB(printk("I/O port mismatch\n"));
659 release_region(devc->base, 16);
660 return 0;
661 }
662 /*
663 * Now continue initialization of the device
664 */
665
666 devc->caps = hw_config->driver_use_1;
667
668 if (!((devc->caps & SB_NO_AUDIO) && (devc->caps & SB_NO_MIDI)) && hw_config->irq > 0)
669 { /* IRQ setup */
670
671 /*
672 * ESS PCI cards do shared PCI IRQ stuff. Since they
673 * will get shared PCI irq lines we must cope.
674 */
675
Thomas Gleixner65ca68b2006-07-01 19:29:46 -0700676 int i=(devc->caps&SB_PCI_IRQ)?IRQF_SHARED:0;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700677
678 if (request_irq(hw_config->irq, sbintr, i, "soundblaster", devc) < 0)
679 {
680 printk(KERN_ERR "SB: Can't allocate IRQ%d\n", hw_config->irq);
681 release_region(devc->base, 16);
682 return 0;
683 }
684 devc->irq_ok = 0;
685
686 if (devc->major == 4)
687 if (!sb16_set_irq_hw(devc, devc->irq)) /* Unsupported IRQ */
688 {
689 free_irq(devc->irq, devc);
690 release_region(devc->base, 16);
691 return 0;
692 }
693 if ((devc->type == 0 || devc->type == MDL_ESS) &&
694 devc->major == 3 && devc->minor == 1)
695 { /* Handle various chipsets which claim they are SB Pro compatible */
696 if ((devc->type != 0 && devc->type != MDL_ESS) ||
697 !ess_init(devc, hw_config))
698 {
699 if ((devc->type != 0 && devc->type != MDL_JAZZ &&
700 devc->type != MDL_SMW) || !init_Jazz16(devc, hw_config))
701 {
702 DDB(printk("This is a genuine SB Pro\n"));
703 }
704 }
705 }
706 if (devc->major == 4 && devc->minor <= 11 ) /* Won't work */
707 devc->irq_ok = 1;
708 else
709 {
710 int n;
711
712 for (n = 0; n < 3 && devc->irq_ok == 0; n++)
713 {
714 if (sb_dsp_command(devc, 0xf2)) /* Cause interrupt immediately */
715 {
716 int i;
717
718 for (i = 0; !devc->irq_ok && i < 10000; i++);
719 }
720 }
721 if (!devc->irq_ok)
722 printk(KERN_WARNING "sb: Interrupt test on IRQ%d failed - Probable IRQ conflict\n", devc->irq);
723 else
724 {
725 DDB(printk("IRQ test OK (IRQ%d)\n", devc->irq));
726 }
727 }
728 } /* IRQ setup */
729
730 last_sb = devc;
731
732 switch (devc->major)
733 {
734 case 1: /* SB 1.0 or 1.5 */
735 devc->model = hw_config->card_subtype = MDL_SB1;
736 break;
737
738 case 2: /* SB 2.x */
739 if (devc->minor == 0)
740 devc->model = hw_config->card_subtype = MDL_SB2;
741 else
742 devc->model = hw_config->card_subtype = MDL_SB201;
743 break;
744
745 case 3: /* SB Pro and most clones */
746 switch (devc->model) {
747 case 0:
748 devc->model = hw_config->card_subtype = MDL_SBPRO;
749 if (hw_config->name == NULL)
750 hw_config->name = "Sound Blaster Pro (8 BIT ONLY)";
751 break;
752 case MDL_ESS:
753 ess_dsp_init(devc, hw_config);
754 break;
755 }
756 break;
757
758 case 4:
759 devc->model = hw_config->card_subtype = MDL_SB16;
760 /*
761 * ALS007 and ALS100 return DSP version 4.2 and have 2 post-reset !=0
762 * registers at 0x3c and 0x4c (output ctrl registers on ALS007) whereas
763 * a "standard" SB16 doesn't have a register at 0x4c. ALS100 actively
764 * updates register 0x22 whenever 0x30 changes, as per the SB16 spec.
765 * Since ALS007 doesn't, this can be used to differentiate the 2 cards.
766 */
767 if ((devc->minor == 2) && sb_getmixer(devc,0x3c) && sb_getmixer(devc,0x4c))
768 {
769 mixer30 = sb_getmixer(devc,0x30);
770 sb_setmixer(devc,0x22,(mixer22=sb_getmixer(devc,0x22)) & 0x0f);
771 sb_setmixer(devc,0x30,0xff);
772 /* ALS100 will force 0x30 to 0xf8 like SB16; ALS007 will allow 0xff. */
773 /* Register 0x22 & 0xf0 on ALS100 == 0xf0; on ALS007 it == 0x10. */
774 if ((sb_getmixer(devc,0x30) != 0xff) || ((sb_getmixer(devc,0x22) & 0xf0) != 0x10))
775 {
776 devc->submodel = SUBMDL_ALS100;
777 if (hw_config->name == NULL)
778 hw_config->name = "Sound Blaster 16 (ALS-100)";
779 }
780 else
781 {
782 sb_setmixer(devc,0x3c,0x1f); /* Enable all inputs */
783 sb_setmixer(devc,0x4c,0x1f);
784 sb_setmixer(devc,0x22,mixer22); /* Restore 0x22 to original value */
785 devc->submodel = SUBMDL_ALS007;
786 if (hw_config->name == NULL)
787 hw_config->name = "Sound Blaster 16 (ALS-007)";
788 }
789 sb_setmixer(devc,0x30,mixer30);
790 }
791 else if (hw_config->name == NULL)
792 hw_config->name = "Sound Blaster 16";
793
794 if (hw_config->dma2 == -1)
795 devc->dma16 = devc->dma8;
796 else if (hw_config->dma2 < 5 || hw_config->dma2 > 7)
797 {
798 printk(KERN_WARNING "SB16: Bad or missing 16 bit DMA channel\n");
799 devc->dma16 = devc->dma8;
800 }
801 else
802 devc->dma16 = hw_config->dma2;
803
804 if(!sb16_set_dma_hw(devc)) {
805 free_irq(devc->irq, devc);
806 release_region(hw_config->io_base, 16);
807 return 0;
808 }
809
810 devc->caps |= SB_NO_MIDI;
811 }
812
813 if (!(devc->caps & SB_NO_MIXER))
814 if (devc->major == 3 || devc->major == 4)
815 sb_mixer_init(devc, owner);
816
817 if (!(devc->caps & SB_NO_MIDI))
818 sb_dsp_midi_init(devc, owner);
819
820 if (hw_config->name == NULL)
821 hw_config->name = "Sound Blaster (8 BIT/MONO ONLY)";
822
823 sprintf(name, "%s (%d.%02d)", hw_config->name, devc->major, devc->minor);
824 conf_printf(name, hw_config);
825
826 /*
827 * Assuming that a sound card is Sound Blaster (compatible) is the most common
828 * configuration error and the mother of all problems. Usually sound cards
829 * emulate SB Pro but in addition they have a 16 bit native mode which should be
830 * used in Unix. See Readme.cards for more information about configuring OSS/Free
831 * properly.
832 */
833 if (devc->model <= MDL_SBPRO)
834 {
835 if (devc->major == 3 && devc->minor != 1) /* "True" SB Pro should have v3.1 (rare ones may have 3.2). */
836 {
837 printk(KERN_INFO "This sound card may not be fully Sound Blaster Pro compatible.\n");
838 printk(KERN_INFO "In many cases there is another way to configure OSS so that\n");
839 printk(KERN_INFO "it works properly with OSS (for example in 16 bit mode).\n");
840 printk(KERN_INFO "Please ignore this message if you _really_ have a SB Pro.\n");
841 }
842 else if (!sb_be_quiet && devc->model == MDL_SBPRO)
843 {
844 printk(KERN_INFO "SB DSP version is just %d.%02d which means that your card is\n", devc->major, devc->minor);
845 printk(KERN_INFO "several years old (8 bit only device) or alternatively the sound driver\n");
846 printk(KERN_INFO "is incorrectly configured.\n");
847 }
848 }
849 hw_config->card_subtype = devc->model;
850 hw_config->slots[0]=devc->dev;
851 last_devc = devc; /* For SB MPU detection */
852
853 if (!(devc->caps & SB_NO_AUDIO) && devc->dma8 >= 0)
854 {
855 if (sound_alloc_dma(devc->dma8, "SoundBlaster8"))
856 {
857 printk(KERN_WARNING "Sound Blaster: Can't allocate 8 bit DMA channel %d\n", devc->dma8);
858 }
859 if (devc->dma16 >= 0 && devc->dma16 != devc->dma8)
860 {
861 if (sound_alloc_dma(devc->dma16, "SoundBlaster16"))
862 printk(KERN_WARNING "Sound Blaster: can't allocate 16 bit DMA channel %d.\n", devc->dma16);
863 }
864 sb_audio_init(devc, name, owner);
865 hw_config->slots[0]=devc->dev;
866 }
867 else
868 {
869 MDB(printk("Sound Blaster: no audio devices found.\n"));
870 }
871 return 1;
872}
873
874/* if (sbmpu) below we allow mpu401 to manage the midi devs
875 otherwise we have to unload them. (Andrzej Krzysztofowicz) */
876
877void sb_dsp_unload(struct address_info *hw_config, int sbmpu)
878{
879 sb_devc *devc;
880
881 devc = audio_devs[hw_config->slots[0]]->devc;
882
883 if (devc && devc->base == hw_config->io_base)
884 {
885 if ((devc->model & MDL_ESS) && devc->pcibase)
886 release_region(devc->pcibase, 8);
887
888 release_region(devc->base, 16);
889
890 if (!(devc->caps & SB_NO_AUDIO))
891 {
892 sound_free_dma(devc->dma8);
893 if (devc->dma16 >= 0)
894 sound_free_dma(devc->dma16);
895 }
896 if (!(devc->caps & SB_NO_AUDIO && devc->caps & SB_NO_MIDI))
897 {
898 if (devc->irq > 0)
899 free_irq(devc->irq, devc);
900
901 sb_mixer_unload(devc);
902 /* We don't have to do this bit any more the UART401 is its own
903 master -- Krzysztof Halasa */
904 /* But we have to do it, if UART401 is not detected */
905 if (!sbmpu)
906 sound_unload_mididev(devc->my_mididev);
907 sound_unload_audiodev(devc->dev);
908 }
909 kfree(devc);
910 }
911 else
912 release_region(hw_config->io_base, 16);
Jesper Juhl09417372005-06-25 14:58:49 -0700913
914 kfree(detected_devc);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700915}
916
917/*
918 * Mixer access routines
919 *
920 * ES1887 modifications: some mixer registers reside in the
921 * range above 0xa0. These must be accessed in another way.
922 */
923
924void sb_setmixer(sb_devc * devc, unsigned int port, unsigned int value)
925{
926 unsigned long flags;
927
928 if (devc->model == MDL_ESS) {
929 ess_setmixer (devc, port, value);
930 return;
931 }
932
933 spin_lock_irqsave(&devc->lock, flags);
934
935 outb(((unsigned char) (port & 0xff)), MIXER_ADDR);
936 udelay(20);
937 outb(((unsigned char) (value & 0xff)), MIXER_DATA);
938 udelay(20);
939
940 spin_unlock_irqrestore(&devc->lock, flags);
941}
942
943unsigned int sb_getmixer(sb_devc * devc, unsigned int port)
944{
945 unsigned int val;
946 unsigned long flags;
947
948 if (devc->model == MDL_ESS) return ess_getmixer (devc, port);
949
950 spin_lock_irqsave(&devc->lock, flags);
951
952 outb(((unsigned char) (port & 0xff)), MIXER_ADDR);
953 udelay(20);
954 val = inb(MIXER_DATA);
955 udelay(20);
956
957 spin_unlock_irqrestore(&devc->lock, flags);
958
959 return val;
960}
961
962void sb_chgmixer
963 (sb_devc * devc, unsigned int reg, unsigned int mask, unsigned int val)
964{
965 int value;
966
967 value = sb_getmixer(devc, reg);
968 value = (value & ~mask) | (val & mask);
969 sb_setmixer(devc, reg, value);
970}
971
972/*
973 * MPU401 MIDI initialization.
974 */
975
976static void smw_putmem(sb_devc * devc, int base, int addr, unsigned char val)
977{
978 unsigned long flags;
979
980 spin_lock_irqsave(&jazz16_lock, flags); /* NOT the SB card? */
981
982 outb((addr & 0xff), base + 1); /* Low address bits */
983 outb((addr >> 8), base + 2); /* High address bits */
984 outb((val), base); /* Data */
985
986 spin_unlock_irqrestore(&jazz16_lock, flags);
987}
988
989static unsigned char smw_getmem(sb_devc * devc, int base, int addr)
990{
991 unsigned long flags;
992 unsigned char val;
993
994 spin_lock_irqsave(&jazz16_lock, flags); /* NOT the SB card? */
995
996 outb((addr & 0xff), base + 1); /* Low address bits */
997 outb((addr >> 8), base + 2); /* High address bits */
998 val = inb(base); /* Data */
999
1000 spin_unlock_irqrestore(&jazz16_lock, flags);
1001 return val;
1002}
1003
1004static int smw_midi_init(sb_devc * devc, struct address_info *hw_config)
1005{
1006 int mpu_base = hw_config->io_base;
1007 int mp_base = mpu_base + 4; /* Microcontroller base */
1008 int i;
1009 unsigned char control;
1010
1011
1012 /*
1013 * Reset the microcontroller so that the RAM can be accessed
1014 */
1015
1016 control = inb(mpu_base + 7);
1017 outb((control | 3), mpu_base + 7); /* Set last two bits to 1 (?) */
1018 outb(((control & 0xfe) | 2), mpu_base + 7); /* xxxxxxx0 resets the mc */
1019
1020 mdelay(3); /* Wait at least 1ms */
1021
1022 outb((control & 0xfc), mpu_base + 7); /* xxxxxx00 enables RAM */
1023
1024 /*
1025 * Detect microcontroller by probing the 8k RAM area
1026 */
1027 smw_putmem(devc, mp_base, 0, 0x00);
1028 smw_putmem(devc, mp_base, 1, 0xff);
1029 udelay(10);
1030
1031 if (smw_getmem(devc, mp_base, 0) != 0x00 || smw_getmem(devc, mp_base, 1) != 0xff)
1032 {
1033 DDB(printk("SM Wave: No microcontroller RAM detected (%02x, %02x)\n", smw_getmem(devc, mp_base, 0), smw_getmem(devc, mp_base, 1)));
1034 return 0; /* No RAM */
1035 }
1036 /*
1037 * There is RAM so assume it's really a SM Wave
1038 */
1039
1040 devc->model = MDL_SMW;
1041 smw_mixer_init(devc);
1042
1043#ifdef MODULE
1044 if (!smw_ucode)
1045 {
1046 smw_ucodeLen = mod_firmware_load("/etc/sound/midi0001.bin", (void *) &smw_ucode);
1047 smw_free = smw_ucode;
1048 }
1049#endif
1050 if (smw_ucodeLen > 0)
1051 {
1052 if (smw_ucodeLen != 8192)
1053 {
1054 printk(KERN_ERR "SM Wave: Invalid microcode (MIDI0001.BIN) length\n");
1055 return 1;
1056 }
1057 /*
1058 * Download microcode
1059 */
1060
1061 for (i = 0; i < 8192; i++)
1062 smw_putmem(devc, mp_base, i, smw_ucode[i]);
1063
1064 /*
1065 * Verify microcode
1066 */
1067
1068 for (i = 0; i < 8192; i++)
1069 if (smw_getmem(devc, mp_base, i) != smw_ucode[i])
1070 {
1071 printk(KERN_ERR "SM Wave: Microcode verification failed\n");
1072 return 0;
1073 }
1074 }
1075 control = 0;
1076#ifdef SMW_SCSI_IRQ
1077 /*
1078 * Set the SCSI interrupt (IRQ2/9, IRQ3 or IRQ10). The SCSI interrupt
1079 * is disabled by default.
1080 *
1081 * FIXME - make this a module option
1082 *
1083 * BTW the Zilog 5380 SCSI controller is located at MPU base + 0x10.
1084 */
1085 {
1086 static unsigned char scsi_irq_bits[] = {
1087 0, 0, 3, 1, 0, 0, 0, 0, 0, 3, 2, 0, 0, 0, 0, 0
1088 };
1089 control |= scsi_irq_bits[SMW_SCSI_IRQ] << 6;
1090 }
1091#endif
1092
1093#ifdef SMW_OPL4_ENABLE
1094 /*
1095 * Make the OPL4 chip visible on the PC bus at 0x380.
1096 *
1097 * There is no need to enable this feature since this driver
1098 * doesn't support OPL4 yet. Also there is no RAM in SM Wave so
1099 * enabling OPL4 is pretty useless.
1100 */
1101 control |= 0x10; /* Uses IRQ12 if bit 0x20 == 0 */
1102 /* control |= 0x20; Uncomment this if you want to use IRQ7 */
1103#endif
1104 outb((control | 0x03), mpu_base + 7); /* xxxxxx11 restarts */
1105 hw_config->name = "SoundMan Wave";
1106 return 1;
1107}
1108
1109static int init_Jazz16_midi(sb_devc * devc, struct address_info *hw_config)
1110{
1111 int mpu_base = hw_config->io_base;
1112 int sb_base = devc->base;
1113 int irq = hw_config->irq;
1114
1115 unsigned char bits = 0;
1116 unsigned long flags;
1117
1118 if (irq < 0)
1119 irq *= -1;
1120
1121 if (irq < 1 || irq > 15 ||
1122 jazz_irq_bits[irq] == 0)
1123 {
1124 printk(KERN_ERR "Jazz16: Invalid MIDI interrupt (IRQ%d)\n", irq);
1125 return 0;
1126 }
1127 switch (sb_base)
1128 {
1129 case 0x220:
1130 bits = 1;
1131 break;
1132 case 0x240:
1133 bits = 2;
1134 break;
1135 case 0x260:
1136 bits = 3;
1137 break;
1138 default:
1139 return 0;
1140 }
1141 bits = jazz16_bits = bits << 5;
1142 switch (mpu_base)
1143 {
1144 case 0x310:
1145 bits |= 1;
1146 break;
1147 case 0x320:
1148 bits |= 2;
1149 break;
1150 case 0x330:
1151 bits |= 3;
1152 break;
1153 default:
1154 printk(KERN_ERR "Jazz16: Invalid MIDI I/O port %x\n", mpu_base);
1155 return 0;
1156 }
1157 /*
1158 * Magic wake up sequence by writing to 0x201 (aka Joystick port)
1159 */
1160 spin_lock_irqsave(&jazz16_lock, flags);
1161 outb(0xAF, 0x201);
1162 outb(0x50, 0x201);
1163 outb(bits, 0x201);
1164 spin_unlock_irqrestore(&jazz16_lock, flags);
1165
1166 hw_config->name = "Jazz16";
1167 smw_midi_init(devc, hw_config);
1168
1169 if (!sb_dsp_command(devc, 0xfb))
1170 return 0;
1171
1172 if (!sb_dsp_command(devc, jazz_dma_bits[devc->dma8] |
1173 (jazz_dma_bits[devc->dma16] << 4)))
1174 return 0;
1175
1176 if (!sb_dsp_command(devc, jazz_irq_bits[devc->irq] |
1177 (jazz_irq_bits[irq] << 4)))
1178 return 0;
1179
1180 return 1;
1181}
1182
1183int probe_sbmpu(struct address_info *hw_config, struct module *owner)
1184{
1185 sb_devc *devc = last_devc;
1186 int ret;
1187
1188 if (last_devc == NULL)
1189 return 0;
1190
1191 last_devc = NULL;
1192
1193 if (hw_config->io_base <= 0)
1194 {
1195 /* The real vibra16 is fine about this, but we have to go
1196 wipe up after Cyrix again */
1197
1198 if(devc->model == MDL_SB16 && devc->minor >= 12)
1199 {
1200 unsigned char bits = sb_getmixer(devc, 0x84) & ~0x06;
1201 sb_setmixer(devc, 0x84, bits | 0x02); /* Disable MPU */
1202 }
1203 return 0;
1204 }
1205
1206#if defined(CONFIG_SOUND_MPU401)
1207 if (devc->model == MDL_ESS)
1208 {
1209 struct resource *ports;
1210 ports = request_region(hw_config->io_base, 2, "mpu401");
1211 if (!ports) {
1212 printk(KERN_ERR "sbmpu: I/O port conflict (%x)\n", hw_config->io_base);
1213 return 0;
1214 }
1215 if (!ess_midi_init(devc, hw_config)) {
1216 release_region(hw_config->io_base, 2);
1217 return 0;
1218 }
1219 hw_config->name = "ESS1xxx MPU";
1220 devc->midi_irq_cookie = NULL;
1221 if (!probe_mpu401(hw_config, ports)) {
1222 release_region(hw_config->io_base, 2);
1223 return 0;
1224 }
1225 attach_mpu401(hw_config, owner);
1226 if (last_sb->irq == -hw_config->irq)
Jeff Garzik73de76a2008-02-06 01:36:16 -08001227 last_sb->midi_irq_cookie =
1228 (void *)(long) hw_config->slots[1];
Linus Torvalds1da177e2005-04-16 15:20:36 -07001229 return 1;
1230 }
1231#endif
1232
1233 switch (devc->model)
1234 {
1235 case MDL_SB16:
1236 if (hw_config->io_base != 0x300 && hw_config->io_base != 0x330)
1237 {
1238 printk(KERN_ERR "SB16: Invalid MIDI port %x\n", hw_config->io_base);
1239 return 0;
1240 }
1241 hw_config->name = "Sound Blaster 16";
1242 if (hw_config->irq < 3 || hw_config->irq == devc->irq)
1243 hw_config->irq = -devc->irq;
1244 if (devc->minor > 12) /* What is Vibra's version??? */
1245 sb16_set_mpu_port(devc, hw_config);
1246 break;
1247
1248 case MDL_JAZZ:
1249 if (hw_config->irq < 3 || hw_config->irq == devc->irq)
1250 hw_config->irq = -devc->irq;
1251 if (!init_Jazz16_midi(devc, hw_config))
1252 return 0;
1253 break;
1254
1255 case MDL_YMPCI:
1256 hw_config->name = "Yamaha PCI Legacy";
1257 printk("Yamaha PCI legacy UART401 check.\n");
1258 break;
1259 default:
1260 return 0;
1261 }
1262
1263 ret = probe_uart401(hw_config, owner);
1264 if (ret)
1265 last_sb->midi_irq_cookie=midi_devs[hw_config->slots[4]]->devc;
1266 return ret;
1267}
1268
1269void unload_sbmpu(struct address_info *hw_config)
1270{
1271#if defined(CONFIG_SOUND_MPU401)
1272 if (!strcmp (hw_config->name, "ESS1xxx MPU")) {
1273 unload_mpu401(hw_config);
1274 return;
1275 }
1276#endif
1277 unload_uart401(hw_config);
1278}
1279
1280EXPORT_SYMBOL(sb_dsp_init);
1281EXPORT_SYMBOL(sb_dsp_detect);
1282EXPORT_SYMBOL(sb_dsp_unload);
1283EXPORT_SYMBOL(sb_be_quiet);
1284EXPORT_SYMBOL(probe_sbmpu);
1285EXPORT_SYMBOL(unload_sbmpu);
1286EXPORT_SYMBOL(smw_free);
1287MODULE_LICENSE("GPL");