blob: 4b12e9031fb3cecbf6259c457aa77c8a394a3674 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#
2# CDROM driver configuration
3#
4
5menu "Old CD-ROM drivers (not SCSI, not IDE)"
David Howells93614012006-09-30 20:45:40 +02006 depends on ISA && BLOCK
Linus Torvalds1da177e2005-04-16 15:20:36 -07007
8config CD_NO_IDESCSI
9 bool "Support non-SCSI/IDE/ATAPI CDROM drives"
10 ---help---
11 If you have a CD-ROM drive that is neither SCSI nor IDE/ATAPI, say Y
12 here, otherwise N. Read the CD-ROM-HOWTO, available from
13 <http://www.tldp.org/docs.html#howto>.
14
15 Note that the answer to this question doesn't directly affect the
16 kernel: saying N will just cause the configurator to skip all
17 the questions about these CD-ROM drives. If you are unsure what you
18 have, say Y and find out whether you have one of the following
19 drives.
20
21 For each of these drivers, a <file:Documentation/cdrom/{driver_name}>
22 exists. Especially in cases where you do not know exactly which kind
23 of drive you have you should read there. Most of these drivers use a
24 file drivers/cdrom/{driver_name}.h where you can define your
25 interface parameters and switch some internal goodies.
26
27 To compile these CD-ROM drivers as a module, choose M instead of Y.
28
29 If you want to use any of these CD-ROM drivers, you also have to
30 answer Y or M to "ISO 9660 CD-ROM file system support" below (this
31 answer will get "defaulted" for you if you enable any of the Linux
32 CD-ROM drivers).
33
34config AZTCD
35 tristate "Aztech/Orchid/Okano/Wearnes/TXC/CyDROM CDROM support"
36 depends on CD_NO_IDESCSI
37 ---help---
38 This is your driver if you have an Aztech CDA268-01A, Orchid
39 CD-3110, Okano or Wearnes CDD110, Conrad TXC, or CyCD-ROM CR520 or
40 CR540 CD-ROM drive. This driver -- just like all these CD-ROM
41 drivers -- is NOT for CD-ROM drives with IDE/ATAPI interfaces, such
42 as Aztech CDA269-031SE. Please read the file
43 <file:Documentation/cdrom/aztcd>.
44
45 If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
46 file system support" below, because that's the file system used on
47 CD-ROMs.
48
49 To compile this driver as a module, choose M here: the
50 module will be called aztcd.
51
52config GSCD
53 tristate "Goldstar R420 CDROM support"
54 depends on CD_NO_IDESCSI
55 ---help---
56 If this is your CD-ROM drive, say Y here. As described in the file
57 <file:Documentation/cdrom/gscd>, you might have to change a setting
58 in the file <file:drivers/cdrom/gscd.h> before compiling the
59 kernel. Please read the file <file:Documentation/cdrom/gscd>.
60
61 If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
62 file system support" below, because that's the file system used on
63 CD-ROMs.
64
65 To compile this driver as a module, choose M here: the
66 module will be called gscd.
67
68config SBPCD
69 tristate "Matsushita/Panasonic/Creative, Longshine, TEAC CDROM support"
70 depends on CD_NO_IDESCSI && BROKEN_ON_SMP
71 ---help---
72 This driver supports most of the drives which use the Panasonic or
73 Sound Blaster interface. Please read the file
74 <file:Documentation/cdrom/sbpcd>.
75
76 The Matsushita CR-521, CR-522, CR-523, CR-562, CR-563 drives
77 (sometimes labeled "Creative"), the Creative Labs CD200, the
78 Longshine LCS-7260, the "IBM External ISA CD-ROM" (in fact a CR-56x
79 model), the TEAC CD-55A fall under this category. Some other
80 "electrically compatible" drives (Vertos, Genoa, some Funai models)
81 are currently not supported; for the Sanyo H94A drive currently a
82 separate driver (asked later) is responsible. Most drives have a
83 uniquely shaped faceplate, with a caddyless motorized drawer, but
84 without external brand markings. The older CR-52x drives have a
85 caddy and manual loading/eject, but still no external markings. The
86 driver is able to do an extended auto-probing for interface
87 addresses and drive types; this can help to find facts in cases you
88 are not sure, but can consume some time during the boot process if
89 none of the supported drives gets found. Once your drive got found,
90 you should enter the reported parameters into
91 <file:drivers/cdrom/sbpcd.h> and set "DISTRIBUTION 0" there.
92
93 This driver can support up to four CD-ROM controller cards, and each
94 card can support up to four CD-ROM drives; if you say Y here, you
95 will be asked how many controller cards you have. If compiled as a
96 module, only one controller card (but with up to four drives) is
97 usable.
98
99 If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
100 file system support" below, because that's the file system used on
101 CD-ROMs.
102
103 To compile this driver as a module, choose M here: the
104 module will be called sbpcd.
105
106config MCDX
107 tristate "Mitsumi CDROM support"
108 depends on CD_NO_IDESCSI
109 ---help---
110 Use this driver if you want to be able to use your Mitsumi LU-005,
111 FX-001 or FX-001D CD-ROM drive.
112
113 Please read the file <file:Documentation/cdrom/mcdx>.
114
115 If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
116 file system support" below, because that's the file system used on
117 CD-ROMs.
118
119 To compile this driver as a module, choose M here: the
120 module will be called mcdx.
121
122config OPTCD
123 tristate "Optics Storage DOLPHIN 8000AT CDROM support"
124 depends on CD_NO_IDESCSI
125 ---help---
126 This is the driver for the 'DOLPHIN' drive with a 34-pin Sony
127 compatible interface. It also works with the Lasermate CR328A. If
128 you have one of those, say Y. This driver does not work for the
129 Optics Storage 8001 drive; use the IDE-ATAPI CD-ROM driver for that
130 one. Please read the file <file:Documentation/cdrom/optcd>.
131
132 If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
133 file system support" below, because that's the file system used on
134 CD-ROMs.
135
136 To compile this driver as a module, choose M here: the
137 module will be called optcd.
138
139config CM206
140 tristate "Philips/LMS CM206 CDROM support"
141 depends on CD_NO_IDESCSI && BROKEN_ON_SMP
142 ---help---
143 If you have a Philips/LMS CD-ROM drive cm206 in combination with a
144 cm260 host adapter card, say Y here. Please also read the file
145 <file:Documentation/cdrom/cm206>.
146
147 If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
148 file system support" below, because that's the file system used on
149 CD-ROMs.
150
151 To compile this driver as a module, choose M here: the
152 module will be called cm206.
153
154config SJCD
155 tristate "Sanyo CDR-H94A CDROM support"
156 depends on CD_NO_IDESCSI
157 help
158 If this is your CD-ROM drive, say Y here and read the file
159 <file:Documentation/cdrom/sjcd>. You should then also say Y or M to
160 "ISO 9660 CD-ROM file system support" below, because that's the
161 file system used on CD-ROMs.
162
163 To compile this driver as a module, choose M here: the
164 module will be called sjcd.
165
166config ISP16_CDI
167 tristate "ISP16/MAD16/Mozart soft configurable cdrom interface support"
168 depends on CD_NO_IDESCSI
169 ---help---
170 These are sound cards with built-in cdrom interfaces using the OPTi
171 82C928 or 82C929 chips. Say Y here to have them detected and
172 possibly configured at boot time. In addition, You'll have to say Y
173 to a driver for the particular cdrom drive you have attached to the
174 card. Read <file:Documentation/cdrom/isp16> for details.
175
176 To compile this driver as a module, choose M here: the
177 module will be called isp16.
178
179config CDU31A
180 tristate "Sony CDU31A/CDU33A CDROM support"
181 depends on CD_NO_IDESCSI && BROKEN_ON_SMP
182 ---help---
183 These CD-ROM drives have a spring-pop-out caddyless drawer, and a
184 rectangular green LED centered beneath it. NOTE: these CD-ROM
185 drives will not be auto detected by the kernel at boot time; you
186 have to provide the interface address as an option to the kernel at
187 boot time as described in <file:Documentation/cdrom/cdu31a> or fill
188 in your parameters into <file:drivers/cdrom/cdu31a.c>. Try "man
189 bootparam" or see the documentation of your boot loader (lilo or
190 loadlin) about how to pass options to the kernel.
191
192 If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
193 file system support" below, because that's the file system used on
194 CD-ROMs.
195
196 To compile this driver as a module, choose M here: the
197 module will be called cdu31a.
198
199config CDU535
200 tristate "Sony CDU535 CDROM support"
201 depends on CD_NO_IDESCSI
202 ---help---
203 This is the driver for the older Sony CDU-535 and CDU-531 CD-ROM
204 drives. Please read the file <file:Documentation/cdrom/sonycd535>.
205
206 If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
207 file system support" below, because that's the file system used on
208 CD-ROMs.
209
210 To compile this driver as a module, choose M here: the
211 module will be called sonycd535.
212
213endmenu