blob: 56906aba5ee351ffce54935f69acaaae7a19c5a7 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * ultrastor.c Copyright (C) 1992 David B. Gentzel
3 * Low-level SCSI driver for UltraStor 14F, 24F, and 34F
4 * by David B. Gentzel, Whitfield Software Services, Carnegie, PA
5 * (gentzel@nova.enet.dec.com)
6 * scatter/gather added by Scott Taylor (n217cg@tamuts.tamu.edu)
7 * 24F and multiple command support by John F. Carr (jfc@athena.mit.edu)
8 * John's work modified by Caleb Epstein (cae@jpmorgan.com) and
9 * Eric Youngdale (ericy@cais.com).
10 * Thanks to UltraStor for providing the necessary documentation
11 *
12 * This is an old driver, for the 14F and 34F you should be using the
13 * u14-34f driver instead.
14 */
15
16/*
17 * TODO:
18 * 1. Find out why scatter/gather is limited to 16 requests per command.
19 * This is fixed, at least on the 24F, as of version 1.12 - CAE.
20 * 2. Look at command linking (mscp.command_link and
21 * mscp.command_link_id). (Does not work with many disks,
22 * and no performance increase. ERY).
23 * 3. Allow multiple adapters.
24 */
25
26/*
27 * NOTES:
28 * The UltraStor 14F, 24F, and 34F are a family of intelligent, high
29 * performance SCSI-2 host adapters. They all support command queueing
30 * and scatter/gather I/O. Some of them can also emulate the standard
31 * WD1003 interface for use with OS's which don't support SCSI. Here
32 * is the scoop on the various models:
33 * 14F - ISA first-party DMA HA with floppy support and WD1003 emulation.
34 * 14N - ISA HA with floppy support. I think that this is a non-DMA
35 * HA. Nothing further known.
36 * 24F - EISA Bus Master HA with floppy support and WD1003 emulation.
37 * 34F - VL-Bus Bus Master HA with floppy support (no WD1003 emulation).
38 *
39 * The 14F, 24F, and 34F are supported by this driver.
40 *
41 * Places flagged with a triple question-mark are things which are either
42 * unfinished, questionable, or wrong.
43 */
44
45/* Changes from version 1.11 alpha to 1.12
46 *
47 * Increased the size of the scatter-gather list to 33 entries for
48 * the 24F adapter (it was 16). I don't have the specs for the 14F
49 * or the 34F, so they may support larger s-g lists as well.
50 *
51 * Caleb Epstein <cae@jpmorgan.com>
52 */
53
54/* Changes from version 1.9 to 1.11
55 *
56 * Patches to bring this driver up to speed with the default kernel
57 * driver which supports only the 14F and 34F adapters. This version
58 * should compile cleanly into 0.99.13, 0.99.12 and probably 0.99.11.
59 *
60 * Fixes from Eric Youngdale to fix a few possible race conditions and
61 * several problems with bit testing operations (insufficient
62 * parentheses).
63 *
64 * Removed the ultrastor_abort() and ultrastor_reset() functions
65 * (enclosed them in #if 0 / #endif). These functions, at least on
66 * the 24F, cause the SCSI bus to do odd things and generally lead to
67 * kernel panics and machine hangs. This is like the Adaptec code.
68 *
69 * Use check/snarf_region for 14f, 34f to avoid I/O space address conflicts.
70 */
71
72/* Changes from version 1.8 to version 1.9
73 *
74 * 0.99.11 patches (cae@jpmorgan.com) */
75
76/* Changes from version 1.7 to version 1.8
77 *
78 * Better error reporting.
79 */
80
81/* Changes from version 1.6 to version 1.7
82 *
83 * Removed CSIR command code.
84 *
85 * Better race condition avoidance (xchgb function added).
86 *
87 * Set ICM and OGM status to zero at probe (24F)
88 *
89 * reset sends soft reset to UltraStor adapter
90 *
91 * reset adapter if adapter interrupts with an invalid MSCP address
92 *
93 * handle aborted command interrupt (24F)
94 *
95 */
96
97/* Changes from version 1.5 to version 1.6:
98 *
99 * Read MSCP address from ICM _before_ clearing the interrupt flag.
100 * This fixes a race condition.
101 */
102
103/* Changes from version 1.4 to version 1.5:
104 *
105 * Abort now calls done when multiple commands are enabled.
106 *
107 * Clear busy when aborted command finishes, not when abort is called.
108 *
109 * More debugging messages for aborts.
110 */
111
112/* Changes from version 1.3 to version 1.4:
113 *
114 * Enable automatic request of sense data on error (requires newer version
115 * of scsi.c to be useful).
116 *
117 * Fix PORT_OVERRIDE for 14F.
118 *
119 * Fix abort and reset to work properly (config.aborted wasn't cleared
120 * after it was tested, so after a command abort no further commands would
121 * work).
122 *
123 * Boot time test to enable SCSI bus reset (defaults to not allowing reset).
124 *
125 * Fix test for OGM busy -- the busy bit is in different places on the 24F.
126 *
127 * Release ICM slot by clearing first byte on 24F.
128 */
129
130#include <linux/module.h>
131#include <linux/blkdev.h>
132#include <linux/interrupt.h>
133#include <linux/stddef.h>
134#include <linux/string.h>
135#include <linux/kernel.h>
136#include <linux/ioport.h>
137#include <linux/proc_fs.h>
138#include <linux/spinlock.h>
139#include <linux/stat.h>
140#include <linux/bitops.h>
141
142#include <asm/io.h>
143#include <asm/system.h>
144#include <asm/dma.h>
145
146#define ULTRASTOR_PRIVATE /* Get the private stuff from ultrastor.h */
147#include "scsi.h"
148#include <scsi/scsi_host.h>
149#include "ultrastor.h"
150
151#define FALSE 0
152#define TRUE 1
153
154#ifndef ULTRASTOR_DEBUG
155#define ULTRASTOR_DEBUG (UD_ABORT|UD_CSIR|UD_RESET)
156#endif
157
158#define VERSION "1.12"
159
160#define PACKED __attribute__((packed))
161#define ALIGNED(x) __attribute__((aligned(x)))
162
163
164/* The 14F uses an array of 4-byte ints for its scatter/gather list.
165 The data can be unaligned, but need not be. It's easier to give
166 the list normal alignment since it doesn't need to fit into a
167 packed structure. */
168
169typedef struct {
170 u32 address;
171 u32 num_bytes;
172} ultrastor_sg_list;
173
174
175/* MailBox SCSI Command Packet. Basic command structure for communicating
176 with controller. */
177struct mscp {
178 unsigned char opcode: 3; /* type of command */
179 unsigned char xdir: 2; /* data transfer direction */
180 unsigned char dcn: 1; /* disable disconnect */
181 unsigned char ca: 1; /* use cache (if available) */
182 unsigned char sg: 1; /* scatter/gather operation */
183 unsigned char target_id: 3; /* target SCSI id */
184 unsigned char ch_no: 2; /* SCSI channel (always 0 for 14f) */
185 unsigned char lun: 3; /* logical unit number */
186 unsigned int transfer_data PACKED; /* transfer data pointer */
187 unsigned int transfer_data_length PACKED; /* length in bytes */
188 unsigned int command_link PACKED; /* for linking command chains */
189 unsigned char scsi_command_link_id; /* identifies command in chain */
190 unsigned char number_of_sg_list; /* (if sg is set) 8 bytes per list */
191 unsigned char length_of_sense_byte;
192 unsigned char length_of_scsi_cdbs; /* 6, 10, or 12 */
193 unsigned char scsi_cdbs[12]; /* SCSI commands */
194 unsigned char adapter_status; /* non-zero indicates HA error */
195 unsigned char target_status; /* non-zero indicates target error */
196 u32 sense_data PACKED;
197 /* The following fields are for software only. They are included in
198 the MSCP structure because they are associated with SCSI requests. */
Henrik Kretzschmarb4620232006-09-06 10:49:48 +0200199 void (*done) (struct scsi_cmnd *);
200 struct scsi_cmnd *SCint;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700201 ultrastor_sg_list sglist[ULTRASTOR_24F_MAX_SG]; /* use larger size for 24F */
202};
203
204
205/* Port addresses (relative to the base address) */
206#define U14F_PRODUCT_ID(port) ((port) + 0x4)
207#define CONFIG(port) ((port) + 0x6)
208
209/* Port addresses relative to the doorbell base address. */
210#define LCL_DOORBELL_MASK(port) ((port) + 0x0)
211#define LCL_DOORBELL_INTR(port) ((port) + 0x1)
212#define SYS_DOORBELL_MASK(port) ((port) + 0x2)
213#define SYS_DOORBELL_INTR(port) ((port) + 0x3)
214
215
216/* Used to store configuration info read from config i/o registers. Most of
217 this is not used yet, but might as well save it.
218
219 This structure also holds port addresses that are not at the same offset
220 on the 14F and 24F.
221
222 This structure holds all data that must be duplicated to support multiple
223 adapters. */
224
225static struct ultrastor_config
226{
227 unsigned short port_address; /* base address of card */
228 unsigned short doorbell_address; /* base address of doorbell CSRs */
229 unsigned short ogm_address; /* base address of OGM */
230 unsigned short icm_address; /* base address of ICM */
231 const void *bios_segment;
232 unsigned char interrupt: 4;
233 unsigned char dma_channel: 3;
234 unsigned char bios_drive_number: 1;
235 unsigned char heads;
236 unsigned char sectors;
237 unsigned char ha_scsi_id: 3;
238 unsigned char subversion: 4;
239 unsigned char revision;
240 /* The slot number is used to distinguish the 24F (slot != 0) from
241 the 14F and 34F (slot == 0). */
242 unsigned char slot;
243
244#ifdef PRINT_U24F_VERSION
245 volatile int csir_done;
246#endif
247
248 /* A pool of MSCP structures for this adapter, and a bitmask of
249 busy structures. (If ULTRASTOR_14F_MAX_CMDS == 1, a 1 byte
250 busy flag is used instead.) */
251
252#if ULTRASTOR_MAX_CMDS == 1
253 unsigned char mscp_busy;
254#else
255 unsigned long mscp_free;
256#endif
257 volatile unsigned char aborted[ULTRASTOR_MAX_CMDS];
258 struct mscp mscp[ULTRASTOR_MAX_CMDS];
259} config = {0};
260
261/* Set this to 1 to reset the SCSI bus on error. */
262static int ultrastor_bus_reset;
263
264
265/* Allowed BIOS base addresses (NULL indicates reserved) */
266static const void *const bios_segment_table[8] = {
267 NULL, (void *)0xC4000, (void *)0xC8000, (void *)0xCC000,
268 (void *)0xD0000, (void *)0xD4000, (void *)0xD8000, (void *)0xDC000,
269};
270
271/* Allowed IRQs for 14f */
272static const unsigned char interrupt_table_14f[4] = { 15, 14, 11, 10 };
273
274/* Allowed DMA channels for 14f (0 indicates reserved) */
275static const unsigned char dma_channel_table_14f[4] = { 5, 6, 7, 0 };
276
277/* Head/sector mappings allowed by 14f */
278static const struct {
279 unsigned char heads;
280 unsigned char sectors;
281} mapping_table[4] = { { 16, 63 }, { 64, 32 }, { 64, 63 }, { 64, 32 } };
282
283#ifndef PORT_OVERRIDE
284/* ??? A probe of address 0x310 screws up NE2000 cards */
285static const unsigned short ultrastor_ports_14f[] = {
286 0x330, 0x340, /*0x310,*/ 0x230, 0x240, 0x210, 0x130, 0x140,
287};
288#endif
289
Jeff Garzikc7bec5a2006-10-06 15:00:58 -0400290static void ultrastor_interrupt(void *);
David Howells7d12e782006-10-05 14:55:46 +0100291static irqreturn_t do_ultrastor_interrupt(int, void *);
Henrik Kretzschmarb4620232006-09-06 10:49:48 +0200292static inline void build_sg_list(struct mscp *, struct scsi_cmnd *SCpnt);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700293
294
295/* Always called with host lock held */
296
297static inline int find_and_clear_bit_16(unsigned long *field)
298{
299 int rv;
300
301 if (*field == 0) panic("No free mscp");
302 asm("xorl %0,%0\n0:\tbsfw %1,%w0\n\tbtr %0,%1\n\tjnc 0b"
303 : "=&r" (rv), "=m" (*field) : "1" (*field));
304 return rv;
305}
306
307/* This has been re-implemented with the help of Richard Earnshaw,
308 <rwe@pegasus.esprit.ec.org> and works with gcc-2.5.8 and gcc-2.6.0.
309 The instability noted by jfc below appears to be a bug in
310 gcc-2.5.x when compiling w/o optimization. --Caleb
311
312 This asm is fragile: it doesn't work without the casts and it may
313 not work without optimization. Maybe I should add a swap builtin
314 to gcc. --jfc */
315static inline unsigned char xchgb(unsigned char reg,
316 volatile unsigned char *mem)
317{
318 __asm__ ("xchgb %0,%1" : "=q" (reg), "=m" (*mem) : "0" (reg));
319 return reg;
320}
321
322#if ULTRASTOR_DEBUG & (UD_COMMAND | UD_ABORT)
323
324/* Always called with the host lock held */
325static void log_ultrastor_abort(struct ultrastor_config *config,
326 int command)
327{
328 static char fmt[80] = "abort %d (%x); MSCP free pool: %x;";
329 int i;
330
331 for (i = 0; i < ULTRASTOR_MAX_CMDS; i++)
332 {
333 fmt[20 + i*2] = ' ';
334 if (! (config->mscp_free & (1 << i)))
335 fmt[21 + i*2] = '0' + config->mscp[i].target_id;
336 else
337 fmt[21 + i*2] = '-';
338 }
339 fmt[20 + ULTRASTOR_MAX_CMDS * 2] = '\n';
340 fmt[21 + ULTRASTOR_MAX_CMDS * 2] = 0;
341 printk(fmt, command, &config->mscp[command], config->mscp_free);
342
343}
344#endif
345
Christoph Hellwigd0be4a7d2005-10-31 18:31:40 +0100346static int ultrastor_14f_detect(struct scsi_host_template * tpnt)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700347{
348 size_t i;
349 unsigned char in_byte, version_byte = 0;
350 struct config_1 {
351 unsigned char bios_segment: 3;
352 unsigned char removable_disks_as_fixed: 1;
353 unsigned char interrupt: 2;
354 unsigned char dma_channel: 2;
355 } config_1;
356 struct config_2 {
357 unsigned char ha_scsi_id: 3;
358 unsigned char mapping_mode: 2;
359 unsigned char bios_drive_number: 1;
360 unsigned char tfr_port: 2;
361 } config_2;
362
363#if (ULTRASTOR_DEBUG & UD_DETECT)
364 printk("US14F: detect: called\n");
365#endif
366
367 /* If a 24F has already been configured, don't look for a 14F. */
368 if (config.bios_segment)
369 return FALSE;
370
371#ifdef PORT_OVERRIDE
372 if(!request_region(PORT_OVERRIDE, 0xc, "ultrastor")) {
373 printk("Ultrastor I/O space already in use\n");
374 return FALSE;
375 };
376 config.port_address = PORT_OVERRIDE;
377#else
378 for (i = 0; i < ARRAY_SIZE(ultrastor_ports_14f); i++) {
379 if(!request_region(ultrastor_ports_14f[i], 0x0c, "ultrastor")) continue;
380 config.port_address = ultrastor_ports_14f[i];
381#endif
382
383#if (ULTRASTOR_DEBUG & UD_DETECT)
384 printk("US14F: detect: testing port address %03X\n", config.port_address);
385#endif
386
387 in_byte = inb(U14F_PRODUCT_ID(config.port_address));
388 if (in_byte != US14F_PRODUCT_ID_0) {
389#if (ULTRASTOR_DEBUG & UD_DETECT)
390# ifdef PORT_OVERRIDE
391 printk("US14F: detect: wrong product ID 0 - %02X\n", in_byte);
392# else
393 printk("US14F: detect: no adapter at port %03X\n", config.port_address);
394# endif
395#endif
396#ifdef PORT_OVERRIDE
397 goto out_release_port;
398#else
399 release_region(config.port_address, 0x0c);
400 continue;
401#endif
402 }
403 in_byte = inb(U14F_PRODUCT_ID(config.port_address) + 1);
404 /* Only upper nibble is significant for Product ID 1 */
405 if ((in_byte & 0xF0) != US14F_PRODUCT_ID_1) {
406#if (ULTRASTOR_DEBUG & UD_DETECT)
407# ifdef PORT_OVERRIDE
408 printk("US14F: detect: wrong product ID 1 - %02X\n", in_byte);
409# else
410 printk("US14F: detect: no adapter at port %03X\n", config.port_address);
411# endif
412#endif
413#ifdef PORT_OVERRIDE
414 goto out_release_port;
415#else
416 release_region(config.port_address, 0x0c);
417 continue;
418#endif
419 }
420 version_byte = in_byte;
421#ifndef PORT_OVERRIDE
422 break;
423 }
424 if (i == ARRAY_SIZE(ultrastor_ports_14f)) {
425# if (ULTRASTOR_DEBUG & UD_DETECT)
426 printk("US14F: detect: no port address found!\n");
427# endif
428 /* all ports probed already released - we can just go straight out */
429 return FALSE;
430 }
431#endif
432
433#if (ULTRASTOR_DEBUG & UD_DETECT)
434 printk("US14F: detect: adapter found at port address %03X\n",
435 config.port_address);
436#endif
437
438 /* Set local doorbell mask to disallow bus reset unless
439 ultrastor_bus_reset is true. */
440 outb(ultrastor_bus_reset ? 0xc2 : 0x82, LCL_DOORBELL_MASK(config.port_address));
441
442 /* All above tests passed, must be the right thing. Get some useful
443 info. */
444
445 /* Register the I/O space that we use */
446
447 *(char *)&config_1 = inb(CONFIG(config.port_address + 0));
448 *(char *)&config_2 = inb(CONFIG(config.port_address + 1));
449 config.bios_segment = bios_segment_table[config_1.bios_segment];
450 config.doorbell_address = config.port_address;
451 config.ogm_address = config.port_address + 0x8;
452 config.icm_address = config.port_address + 0xC;
453 config.interrupt = interrupt_table_14f[config_1.interrupt];
454 config.ha_scsi_id = config_2.ha_scsi_id;
455 config.heads = mapping_table[config_2.mapping_mode].heads;
456 config.sectors = mapping_table[config_2.mapping_mode].sectors;
457 config.bios_drive_number = config_2.bios_drive_number;
458 config.subversion = (version_byte & 0x0F);
459 if (config.subversion == U34F)
460 config.dma_channel = 0;
461 else
462 config.dma_channel = dma_channel_table_14f[config_1.dma_channel];
463
464 if (!config.bios_segment) {
465#if (ULTRASTOR_DEBUG & UD_DETECT)
466 printk("US14F: detect: not detected.\n");
467#endif
468 goto out_release_port;
469 }
470
471 /* Final consistency check, verify previous info. */
472 if (config.subversion != U34F)
473 if (!config.dma_channel || !(config_2.tfr_port & 0x2)) {
474#if (ULTRASTOR_DEBUG & UD_DETECT)
475 printk("US14F: detect: consistency check failed\n");
476#endif
477 goto out_release_port;
478 }
479
480 /* If we were TRULY paranoid, we could issue a host adapter inquiry
481 command here and verify the data returned. But frankly, I'm
482 exhausted! */
483
484 /* Finally! Now I'm satisfied... */
485#if (ULTRASTOR_DEBUG & UD_DETECT)
486 printk("US14F: detect: detect succeeded\n"
487 " Port address: %03X\n"
488 " BIOS segment: %05X\n"
489 " Interrupt: %u\n"
490 " DMA channel: %u\n"
491 " H/A SCSI ID: %u\n"
492 " Subversion: %u\n",
493 config.port_address, config.bios_segment, config.interrupt,
494 config.dma_channel, config.ha_scsi_id, config.subversion);
495#endif
496 tpnt->this_id = config.ha_scsi_id;
497 tpnt->unchecked_isa_dma = (config.subversion != U34F);
498
499#if ULTRASTOR_MAX_CMDS > 1
500 config.mscp_free = ~0;
501#endif
502
503 /*
504 * Brrr, &config.mscp[0].SCint->host) it is something magical....
505 * XXX and FIXME
506 */
507 if (request_irq(config.interrupt, do_ultrastor_interrupt, 0, "Ultrastor", &config.mscp[0].SCint->device->host)) {
508 printk("Unable to allocate IRQ%u for UltraStor controller.\n",
509 config.interrupt);
510 goto out_release_port;
511 }
512 if (config.dma_channel && request_dma(config.dma_channel,"Ultrastor")) {
513 printk("Unable to allocate DMA channel %u for UltraStor controller.\n",
514 config.dma_channel);
515 free_irq(config.interrupt, NULL);
516 goto out_release_port;
517 }
518 tpnt->sg_tablesize = ULTRASTOR_14F_MAX_SG;
519 printk("UltraStor driver version" VERSION ". Using %d SG lists.\n",
520 ULTRASTOR_14F_MAX_SG);
521
522 return TRUE;
523out_release_port:
524 release_region(config.port_address, 0x0c);
525 return FALSE;
526}
527
Christoph Hellwigd0be4a7d2005-10-31 18:31:40 +0100528static int ultrastor_24f_detect(struct scsi_host_template * tpnt)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700529{
530 int i;
531 struct Scsi_Host * shpnt = NULL;
532
533#if (ULTRASTOR_DEBUG & UD_DETECT)
534 printk("US24F: detect");
535#endif
536
537 /* probe each EISA slot at slot address C80 */
538 for (i = 1; i < 15; i++)
539 {
540 unsigned char config_1, config_2;
541 unsigned short addr = (i << 12) | ULTRASTOR_24F_PORT;
542
543 if (inb(addr) != US24F_PRODUCT_ID_0 &&
544 inb(addr+1) != US24F_PRODUCT_ID_1 &&
545 inb(addr+2) != US24F_PRODUCT_ID_2)
546 continue;
547
548 config.revision = inb(addr+3);
549 config.slot = i;
550 if (! (inb(addr+4) & 1))
551 {
552#if (ULTRASTOR_DEBUG & UD_DETECT)
553 printk("U24F: found disabled card in slot %u\n", i);
554#endif
555 continue;
556 }
557#if (ULTRASTOR_DEBUG & UD_DETECT)
558 printk("U24F: found card in slot %u\n", i);
559#endif
560 config_1 = inb(addr + 5);
561 config.bios_segment = bios_segment_table[config_1 & 7];
562 switch(config_1 >> 4)
563 {
564 case 1:
565 config.interrupt = 15;
566 break;
567 case 2:
568 config.interrupt = 14;
569 break;
570 case 4:
571 config.interrupt = 11;
572 break;
573 case 8:
574 config.interrupt = 10;
575 break;
576 default:
577 printk("U24F: invalid IRQ\n");
578 return FALSE;
579 }
580
581 /* BIOS addr set */
582 /* base port set */
583 config.port_address = addr;
584 config.doorbell_address = addr + 12;
585 config.ogm_address = addr + 0x17;
586 config.icm_address = addr + 0x1C;
587 config_2 = inb(addr + 7);
588 config.ha_scsi_id = config_2 & 7;
589 config.heads = mapping_table[(config_2 >> 3) & 3].heads;
590 config.sectors = mapping_table[(config_2 >> 3) & 3].sectors;
591#if (ULTRASTOR_DEBUG & UD_DETECT)
592 printk("US24F: detect: detect succeeded\n"
593 " Port address: %03X\n"
594 " BIOS segment: %05X\n"
595 " Interrupt: %u\n"
596 " H/A SCSI ID: %u\n",
597 config.port_address, config.bios_segment,
598 config.interrupt, config.ha_scsi_id);
599#endif
600 tpnt->this_id = config.ha_scsi_id;
601 tpnt->unchecked_isa_dma = 0;
602 tpnt->sg_tablesize = ULTRASTOR_24F_MAX_SG;
603
604 shpnt = scsi_register(tpnt, 0);
605 if (!shpnt) {
606 printk(KERN_WARNING "(ultrastor:) Could not register scsi device. Aborting registration.\n");
607 free_irq(config.interrupt, do_ultrastor_interrupt);
608 return FALSE;
609 }
610
611 if (request_irq(config.interrupt, do_ultrastor_interrupt, 0, "Ultrastor", shpnt))
612 {
613 printk("Unable to allocate IRQ%u for UltraStor controller.\n",
614 config.interrupt);
615 return FALSE;
616 }
617
618 shpnt->irq = config.interrupt;
619 shpnt->dma_channel = config.dma_channel;
620 shpnt->io_port = config.port_address;
621
622#if ULTRASTOR_MAX_CMDS > 1
623 config.mscp_free = ~0;
624#endif
625 /* Mark ICM and OGM free */
626 outb(0, addr + 0x16);
627 outb(0, addr + 0x1B);
628
629 /* Set local doorbell mask to disallow bus reset unless
630 ultrastor_bus_reset is true. */
631 outb(ultrastor_bus_reset ? 0xc2 : 0x82, LCL_DOORBELL_MASK(addr+12));
632 outb(0x02, SYS_DOORBELL_MASK(addr+12));
633 printk("UltraStor driver version " VERSION ". Using %d SG lists.\n",
634 tpnt->sg_tablesize);
635 return TRUE;
636 }
637 return FALSE;
638}
639
Christoph Hellwigd0be4a7d2005-10-31 18:31:40 +0100640static int ultrastor_detect(struct scsi_host_template * tpnt)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700641{
642 tpnt->proc_name = "ultrastor";
643 return ultrastor_14f_detect(tpnt) || ultrastor_24f_detect(tpnt);
644}
645
646static int ultrastor_release(struct Scsi_Host *shost)
647{
648 if (shost->irq)
649 free_irq(shost->irq, NULL);
650 if (shost->dma_channel != 0xff)
651 free_dma(shost->dma_channel);
652 if (shost->io_port && shost->n_io_port)
653 release_region(shost->io_port, shost->n_io_port);
654 scsi_unregister(shost);
655 return 0;
656}
657
658static const char *ultrastor_info(struct Scsi_Host * shpnt)
659{
660 static char buf[64];
661
662 if (config.slot)
663 sprintf(buf, "UltraStor 24F SCSI @ Slot %u IRQ%u",
664 config.slot, config.interrupt);
665 else if (config.subversion)
666 sprintf(buf, "UltraStor 34F SCSI @ Port %03X BIOS %05X IRQ%u",
667 config.port_address, (int)config.bios_segment,
668 config.interrupt);
669 else
670 sprintf(buf, "UltraStor 14F SCSI @ Port %03X BIOS %05X IRQ%u DMA%u",
671 config.port_address, (int)config.bios_segment,
672 config.interrupt, config.dma_channel);
673 return buf;
674}
675
Henrik Kretzschmarb4620232006-09-06 10:49:48 +0200676static inline void build_sg_list(struct mscp *mscp, struct scsi_cmnd *SCpnt)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700677{
678 struct scatterlist *sl;
679 long transfer_length = 0;
680 int i, max;
681
682 sl = (struct scatterlist *) SCpnt->request_buffer;
683 max = SCpnt->use_sg;
684 for (i = 0; i < max; i++) {
685 mscp->sglist[i].address = isa_page_to_bus(sl[i].page) + sl[i].offset;
686 mscp->sglist[i].num_bytes = sl[i].length;
687 transfer_length += sl[i].length;
688 }
689 mscp->number_of_sg_list = max;
690 mscp->transfer_data = isa_virt_to_bus(mscp->sglist);
691 /* ??? May not be necessary. Docs are unclear as to whether transfer
692 length field is ignored or whether it should be set to the total
693 number of bytes of the transfer. */
694 mscp->transfer_data_length = transfer_length;
695}
696
Henrik Kretzschmarb4620232006-09-06 10:49:48 +0200697static int ultrastor_queuecommand(struct scsi_cmnd *SCpnt,
698 void (*done) (struct scsi_cmnd *))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700699{
700 struct mscp *my_mscp;
701#if ULTRASTOR_MAX_CMDS > 1
702 int mscp_index;
703#endif
704 unsigned int status;
705
706 /* Next test is for debugging; "can't happen" */
707 if ((config.mscp_free & ((1U << ULTRASTOR_MAX_CMDS) - 1)) == 0)
708 panic("ultrastor_queuecommand: no free MSCP\n");
709 mscp_index = find_and_clear_bit_16(&config.mscp_free);
710
711 /* Has the command been aborted? */
712 if (xchgb(0xff, &config.aborted[mscp_index]) != 0)
713 {
714 status = DID_ABORT << 16;
715 goto aborted;
716 }
717
718 my_mscp = &config.mscp[mscp_index];
719
720 *(unsigned char *)my_mscp = OP_SCSI | (DTD_SCSI << 3);
721
722 /* Tape drives don't work properly if the cache is used. The SCSI
723 READ command for a tape doesn't have a block offset, and the adapter
724 incorrectly assumes that all reads from the tape read the same
725 blocks. Results will depend on read buffer size and other disk
726 activity.
727
728 ??? Which other device types should never use the cache? */
729 my_mscp->ca = SCpnt->device->type != TYPE_TAPE;
730 my_mscp->target_id = SCpnt->device->id;
731 my_mscp->ch_no = 0;
732 my_mscp->lun = SCpnt->device->lun;
733 if (SCpnt->use_sg) {
734 /* Set scatter/gather flag in SCSI command packet */
735 my_mscp->sg = TRUE;
736 build_sg_list(my_mscp, SCpnt);
737 } else {
738 /* Unset scatter/gather flag in SCSI command packet */
739 my_mscp->sg = FALSE;
740 my_mscp->transfer_data = isa_virt_to_bus(SCpnt->request_buffer);
741 my_mscp->transfer_data_length = SCpnt->request_bufflen;
742 }
743 my_mscp->command_link = 0; /*???*/
744 my_mscp->scsi_command_link_id = 0; /*???*/
745 my_mscp->length_of_sense_byte = sizeof SCpnt->sense_buffer;
746 my_mscp->length_of_scsi_cdbs = SCpnt->cmd_len;
747 memcpy(my_mscp->scsi_cdbs, SCpnt->cmnd, my_mscp->length_of_scsi_cdbs);
748 my_mscp->adapter_status = 0;
749 my_mscp->target_status = 0;
750 my_mscp->sense_data = isa_virt_to_bus(&SCpnt->sense_buffer);
751 my_mscp->done = done;
752 my_mscp->SCint = SCpnt;
753 SCpnt->host_scribble = (unsigned char *)my_mscp;
754
755 /* Find free OGM slot. On 24F, look for OGM status byte == 0.
756 On 14F and 34F, wait for local interrupt pending flag to clear.
757
758 FIXME: now we are using new_eh we should punt here and let the
759 midlayer sort it out */
760
761retry:
762 if (config.slot)
763 while (inb(config.ogm_address - 1) != 0 && config.aborted[mscp_index] == 0xff)
764 barrier();
765
766 /* else??? */
767
768 while ((inb(LCL_DOORBELL_INTR(config.doorbell_address)) & (config.slot ? 2 : 1)) && config.aborted[mscp_index] == 0xff)
769 barrier();
770
771 /* To avoid race conditions, keep the code to write to the adapter
772 atomic. This simplifies the abort code. Right now the
773 scsi mid layer has the host_lock already held
774 */
775
776 if (inb(LCL_DOORBELL_INTR(config.doorbell_address)) & (config.slot ? 2 : 1))
777 goto retry;
778
779 status = xchgb(0, &config.aborted[mscp_index]);
780 if (status != 0xff) {
781
782#if ULTRASTOR_DEBUG & (UD_COMMAND | UD_ABORT)
783 printk("USx4F: queuecommand: aborted\n");
784#if ULTRASTOR_MAX_CMDS > 1
785 log_ultrastor_abort(&config, mscp_index);
786#endif
787#endif
788 status <<= 16;
789
790 aborted:
791 set_bit(mscp_index, &config.mscp_free);
792 /* If the driver queues commands, call the done proc here. Otherwise
793 return an error. */
794#if ULTRASTOR_MAX_CMDS > 1
795 SCpnt->result = status;
796 done(SCpnt);
797 return 0;
798#else
799 return status;
800#endif
801 }
802
803 /* Store pointer in OGM address bytes */
804 outl(isa_virt_to_bus(my_mscp), config.ogm_address);
805
806 /* Issue OGM interrupt */
807 if (config.slot) {
808 /* Write OGM command register on 24F */
809 outb(1, config.ogm_address - 1);
810 outb(0x2, LCL_DOORBELL_INTR(config.doorbell_address));
811 } else {
812 outb(0x1, LCL_DOORBELL_INTR(config.doorbell_address));
813 }
814
815#if (ULTRASTOR_DEBUG & UD_COMMAND)
816 printk("USx4F: queuecommand: returning\n");
817#endif
818
819 return 0;
820}
821
822/* This code must deal with 2 cases:
823
824 1. The command has not been written to the OGM. In this case, set
825 the abort flag and return.
826
827 2. The command has been written to the OGM and is stuck somewhere in
828 the adapter.
829
830 2a. On a 24F, ask the adapter to abort the command. It will interrupt
831 when it does.
832
833 2b. Call the command's done procedure.
834
835 */
836
Henrik Kretzschmarb4620232006-09-06 10:49:48 +0200837static int ultrastor_abort(struct scsi_cmnd *SCpnt)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700838{
839#if ULTRASTOR_DEBUG & UD_ABORT
840 char out[108];
841 unsigned char icm_status = 0, ogm_status = 0;
842 unsigned int icm_addr = 0, ogm_addr = 0;
843#endif
844 unsigned int mscp_index;
845 unsigned char old_aborted;
846 unsigned long flags;
Henrik Kretzschmarb4620232006-09-06 10:49:48 +0200847 void (*done)(struct scsi_cmnd *);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700848 struct Scsi_Host *host = SCpnt->device->host;
849
850 if(config.slot)
851 return FAILED; /* Do not attempt an abort for the 24f */
852
853 /* Simple consistency checking */
854 if(!SCpnt->host_scribble)
855 return FAILED;
856
857 mscp_index = ((struct mscp *)SCpnt->host_scribble) - config.mscp;
858 if (mscp_index >= ULTRASTOR_MAX_CMDS)
859 panic("Ux4F aborting invalid MSCP");
860
861#if ULTRASTOR_DEBUG & UD_ABORT
862 if (config.slot)
863 {
864 int port0 = (config.slot << 12) | 0xc80;
865 int i;
866 unsigned long flags;
867
868 spin_lock_irqsave(host->host_lock, flags);
869 strcpy(out, "OGM %d:%x ICM %d:%x ports: ");
870 for (i = 0; i < 16; i++)
871 {
872 unsigned char p = inb(port0 + i);
873 out[28 + i * 3] = "0123456789abcdef"[p >> 4];
874 out[29 + i * 3] = "0123456789abcdef"[p & 15];
875 out[30 + i * 3] = ' ';
876 }
877 out[28 + i * 3] = '\n';
878 out[29 + i * 3] = 0;
879 ogm_status = inb(port0 + 22);
880 ogm_addr = (unsigned int)isa_bus_to_virt(inl(port0 + 23));
881 icm_status = inb(port0 + 27);
882 icm_addr = (unsigned int)isa_bus_to_virt(inl(port0 + 28));
Jeff Garzik 8fa728a2005-05-28 07:54:40 -0400883 spin_unlock_irqrestore(host->host_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700884 }
885
886 /* First check to see if an interrupt is pending. I suspect the SiS
887 chipset loses interrupts. (I also suspect is mangles data, but
888 one bug at a time... */
889 if (config.slot ? inb(config.icm_address - 1) == 2 :
890 (inb(SYS_DOORBELL_INTR(config.doorbell_address)) & 1))
891 {
892 printk("Ux4F: abort while completed command pending\n");
893
894 spin_lock_irqsave(host->host_lock, flags);
895 /* FIXME: Ewww... need to think about passing host around properly */
Jeff Garzikc7bec5a2006-10-06 15:00:58 -0400896 ultrastor_interrupt(NULL);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700897 spin_unlock_irqrestore(host->host_lock, flags);
898 return SUCCESS;
899 }
900#endif
901
902 old_aborted = xchgb(DID_ABORT, &config.aborted[mscp_index]);
903
904 /* aborted == 0xff is the signal that queuecommand has not yet sent
905 the command. It will notice the new abort flag and fail. */
906 if (old_aborted == 0xff)
907 return SUCCESS;
908
909 /* On 24F, send an abort MSCP request. The adapter will interrupt
910 and the interrupt handler will call done. */
911 if (config.slot && inb(config.ogm_address - 1) == 0)
912 {
913 unsigned long flags;
914
915 spin_lock_irqsave(host->host_lock, flags);
916 outl(isa_virt_to_bus(&config.mscp[mscp_index]), config.ogm_address);
917 udelay(8);
918 outb(0x80, config.ogm_address - 1);
919 outb(0x2, LCL_DOORBELL_INTR(config.doorbell_address));
920#if ULTRASTOR_DEBUG & UD_ABORT
921 log_ultrastor_abort(&config, mscp_index);
922 printk(out, ogm_status, ogm_addr, icm_status, icm_addr);
923#endif
924 spin_unlock_irqrestore(host->host_lock, flags);
925 /* FIXME: add a wait for the abort to complete */
926 return SUCCESS;
927 }
928
929#if ULTRASTOR_DEBUG & UD_ABORT
930 log_ultrastor_abort(&config, mscp_index);
931#endif
932
933 /* Can't request a graceful abort. Either this is not a 24F or
934 the OGM is busy. Don't free the command -- the adapter might
935 still be using it. Setting SCint = 0 causes the interrupt
936 handler to ignore the command. */
937
938 /* FIXME - devices that implement soft resets will still be running
939 the command after a bus reset. We would probably rather leave
940 the command in the queue. The upper level code will automatically
941 leave the command in the active state instead of requeueing it. ERY */
942
943#if ULTRASTOR_DEBUG & UD_ABORT
944 if (config.mscp[mscp_index].SCint != SCpnt)
945 printk("abort: command mismatch, %p != %p\n",
946 config.mscp[mscp_index].SCint, SCpnt);
947#endif
948 if (config.mscp[mscp_index].SCint == 0)
akpm@osdl.org69aa3f72005-05-01 08:58:35 -0700949 return FAILED;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700950
951 if (config.mscp[mscp_index].SCint != SCpnt) panic("Bad abort");
952 config.mscp[mscp_index].SCint = NULL;
953 done = config.mscp[mscp_index].done;
954 config.mscp[mscp_index].done = NULL;
955 SCpnt->result = DID_ABORT << 16;
956
957 /* Take the host lock to guard against scsi layer re-entry */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700958 done(SCpnt);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700959
960 /* Need to set a timeout here in case command never completes. */
961 return SUCCESS;
962}
963
Henrik Kretzschmarb4620232006-09-06 10:49:48 +0200964static int ultrastor_host_reset(struct scsi_cmnd * SCpnt)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700965{
966 unsigned long flags;
967 int i;
968 struct Scsi_Host *host = SCpnt->device->host;
969
970#if (ULTRASTOR_DEBUG & UD_RESET)
971 printk("US14F: reset: called\n");
972#endif
973
974 if(config.slot)
975 return FAILED;
976
977 spin_lock_irqsave(host->host_lock, flags);
978 /* Reset the adapter and SCSI bus. The SCSI bus reset can be
979 inhibited by clearing ultrastor_bus_reset before probe. */
980 outb(0xc0, LCL_DOORBELL_INTR(config.doorbell_address));
981 if (config.slot)
982 {
983 outb(0, config.ogm_address - 1);
984 outb(0, config.icm_address - 1);
985 }
986
987#if ULTRASTOR_MAX_CMDS == 1
988 if (config.mscp_busy && config.mscp->done && config.mscp->SCint)
989 {
990 config.mscp->SCint->result = DID_RESET << 16;
991 config.mscp->done(config.mscp->SCint);
992 }
993 config.mscp->SCint = 0;
994#else
995 for (i = 0; i < ULTRASTOR_MAX_CMDS; i++)
996 {
997 if (! (config.mscp_free & (1 << i)) &&
998 config.mscp[i].done && config.mscp[i].SCint)
999 {
1000 config.mscp[i].SCint->result = DID_RESET << 16;
1001 config.mscp[i].done(config.mscp[i].SCint);
1002 config.mscp[i].done = NULL;
1003 }
1004 config.mscp[i].SCint = NULL;
1005 }
1006#endif
1007
1008 /* FIXME - if the device implements soft resets, then the command
1009 will still be running. ERY
1010
1011 Even bigger deal with new_eh!
1012 */
1013
1014 memset((unsigned char *)config.aborted, 0, sizeof config.aborted);
1015#if ULTRASTOR_MAX_CMDS == 1
1016 config.mscp_busy = 0;
1017#else
1018 config.mscp_free = ~0;
1019#endif
1020
1021 spin_unlock_irqrestore(host->host_lock, flags);
2bc474c2005-04-10 22:19:25 -05001022 return SUCCESS;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001023
1024}
1025
1026int ultrastor_biosparam(struct scsi_device *sdev, struct block_device *bdev,
1027 sector_t capacity, int * dkinfo)
1028{
1029 int size = capacity;
1030 unsigned int s = config.heads * config.sectors;
1031
1032 dkinfo[0] = config.heads;
1033 dkinfo[1] = config.sectors;
1034 dkinfo[2] = size / s; /* Ignore partial cylinders */
1035#if 0
1036 if (dkinfo[2] > 1024)
1037 dkinfo[2] = 1024;
1038#endif
1039 return 0;
1040}
1041
Jeff Garzikc7bec5a2006-10-06 15:00:58 -04001042static void ultrastor_interrupt(void *dev_id)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001043{
1044 unsigned int status;
1045#if ULTRASTOR_MAX_CMDS > 1
1046 unsigned int mscp_index;
1047#endif
1048 struct mscp *mscp;
Henrik Kretzschmarb4620232006-09-06 10:49:48 +02001049 void (*done) (struct scsi_cmnd *);
1050 struct scsi_cmnd *SCtmp;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001051
1052#if ULTRASTOR_MAX_CMDS == 1
1053 mscp = &config.mscp[0];
1054#else
1055 mscp = (struct mscp *)isa_bus_to_virt(inl(config.icm_address));
1056 mscp_index = mscp - config.mscp;
1057 if (mscp_index >= ULTRASTOR_MAX_CMDS) {
1058 printk("Ux4F interrupt: bad MSCP address %x\n", (unsigned int) mscp);
1059 /* A command has been lost. Reset and report an error
1060 for all commands. */
1061 ultrastor_host_reset(dev_id);
1062 return;
1063 }
1064#endif
1065
1066 /* Clean ICM slot (set ICMINT bit to 0) */
1067 if (config.slot) {
1068 unsigned char icm_status = inb(config.icm_address - 1);
1069#if ULTRASTOR_DEBUG & (UD_INTERRUPT|UD_ERROR|UD_ABORT)
1070 if (icm_status != 1 && icm_status != 2)
1071 printk("US24F: ICM status %x for MSCP %d (%x)\n", icm_status,
1072 mscp_index, (unsigned int) mscp);
1073#endif
1074 /* The manual says clear interrupt then write 0 to ICM status.
1075 This seems backwards, but I'll do it anyway. --jfc */
1076 outb(2, SYS_DOORBELL_INTR(config.doorbell_address));
1077 outb(0, config.icm_address - 1);
1078 if (icm_status == 4) {
1079 printk("UltraStor abort command failed\n");
1080 return;
1081 }
1082 if (icm_status == 3) {
Henrik Kretzschmarb4620232006-09-06 10:49:48 +02001083 void (*done)(struct scsi_cmnd *) = mscp->done;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001084 if (done) {
1085 mscp->done = NULL;
1086 mscp->SCint->result = DID_ABORT << 16;
1087 done(mscp->SCint);
1088 }
1089 return;
1090 }
1091 } else {
1092 outb(1, SYS_DOORBELL_INTR(config.doorbell_address));
1093 }
1094
1095 SCtmp = mscp->SCint;
1096 mscp->SCint = NULL;
1097
1098 if (SCtmp == 0)
1099 {
1100#if ULTRASTOR_DEBUG & (UD_ABORT|UD_INTERRUPT)
1101 printk("MSCP %d (%x): no command\n", mscp_index, (unsigned int) mscp);
1102#endif
1103#if ULTRASTOR_MAX_CMDS == 1
1104 config.mscp_busy = FALSE;
1105#else
1106 set_bit(mscp_index, &config.mscp_free);
1107#endif
1108 config.aborted[mscp_index] = 0;
1109 return;
1110 }
1111
1112 /* Save done locally and zero before calling. This is needed as
1113 once we call done, we may get another command queued before this
1114 interrupt service routine can return. */
1115 done = mscp->done;
1116 mscp->done = NULL;
1117
1118 /* Let the higher levels know that we're done */
1119 switch (mscp->adapter_status)
1120 {
1121 case 0:
1122 status = DID_OK << 16;
1123 break;
1124 case 0x01: /* invalid command */
1125 case 0x02: /* invalid parameters */
1126 case 0x03: /* invalid data list */
1127 default:
1128 status = DID_ERROR << 16;
1129 break;
1130 case 0x84: /* SCSI bus abort */
1131 status = DID_ABORT << 16;
1132 break;
1133 case 0x91:
1134 status = DID_TIME_OUT << 16;
1135 break;
1136 }
1137
1138 SCtmp->result = status | mscp->target_status;
1139
1140 SCtmp->host_scribble = NULL;
1141
1142 /* Free up mscp block for next command */
1143#if ULTRASTOR_MAX_CMDS == 1
1144 config.mscp_busy = FALSE;
1145#else
1146 set_bit(mscp_index, &config.mscp_free);
1147#endif
1148
1149#if ULTRASTOR_DEBUG & (UD_ABORT|UD_INTERRUPT)
1150 if (config.aborted[mscp_index])
1151 printk("Ux4 interrupt: MSCP %d (%x) aborted = %d\n",
1152 mscp_index, (unsigned int) mscp, config.aborted[mscp_index]);
1153#endif
1154 config.aborted[mscp_index] = 0;
1155
1156 if (done)
1157 done(SCtmp);
1158 else
1159 printk("US14F: interrupt: unexpected interrupt\n");
1160
1161 if (config.slot ? inb(config.icm_address - 1) :
1162 (inb(SYS_DOORBELL_INTR(config.doorbell_address)) & 1))
1163#if (ULTRASTOR_DEBUG & UD_MULTI_CMD)
1164 printk("Ux4F: multiple commands completed\n");
1165#else
1166 ;
1167#endif
1168
1169#if (ULTRASTOR_DEBUG & UD_INTERRUPT)
1170 printk("USx4F: interrupt: returning\n");
1171#endif
1172}
1173
David Howells7d12e782006-10-05 14:55:46 +01001174static irqreturn_t do_ultrastor_interrupt(int irq, void *dev_id)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001175{
1176 unsigned long flags;
1177 struct Scsi_Host *dev = dev_id;
1178
1179 spin_lock_irqsave(dev->host_lock, flags);
Jeff Garzikc7bec5a2006-10-06 15:00:58 -04001180 ultrastor_interrupt(dev_id);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001181 spin_unlock_irqrestore(dev->host_lock, flags);
1182 return IRQ_HANDLED;
1183}
1184
1185MODULE_LICENSE("GPL");
1186
Christoph Hellwigd0be4a7d2005-10-31 18:31:40 +01001187static struct scsi_host_template driver_template = {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001188 .name = "UltraStor 14F/24F/34F",
1189 .detect = ultrastor_detect,
1190 .release = ultrastor_release,
1191 .info = ultrastor_info,
1192 .queuecommand = ultrastor_queuecommand,
1193 .eh_abort_handler = ultrastor_abort,
1194 .eh_host_reset_handler = ultrastor_host_reset,
1195 .bios_param = ultrastor_biosparam,
1196 .can_queue = ULTRASTOR_MAX_CMDS,
1197 .sg_tablesize = ULTRASTOR_14F_MAX_SG,
1198 .cmd_per_lun = ULTRASTOR_MAX_CMDS_PER_LUN,
1199 .unchecked_isa_dma = 1,
1200 .use_clustering = ENABLE_CLUSTERING,
1201};
1202#include "scsi_module.c"