blob: 290fa5f97dedf8df849ef98329799e4244ccb2a5 [file] [log] [blame]
Michael Downey99f83c92005-06-27 11:48:26 -06001/*
2 * keyspan_remote: USB driver for the Keyspan DMR
3 *
4 * Copyright (C) 2005 Zymeta Corporation - Michael Downey (downey@zymeta.com)
5 *
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License as
8 * published by the Free Software Foundation, version 2.
9 *
10 * This driver has been put together with the support of Innosys, Inc.
11 * and Keyspan, Inc the manufacturers of the Keyspan USB DMR product.
12 */
13
Michael Downey99f83c92005-06-27 11:48:26 -060014#include <linux/kernel.h>
15#include <linux/errno.h>
16#include <linux/init.h>
17#include <linux/slab.h>
18#include <linux/module.h>
David Brownellae0dadc2006-06-13 10:04:34 -070019#include <linux/usb/input.h>
Michael Downey99f83c92005-06-27 11:48:26 -060020
21#define DRIVER_VERSION "v0.1"
22#define DRIVER_AUTHOR "Michael Downey <downey@zymeta.com>"
23#define DRIVER_DESC "Driver for the USB Keyspan remote control."
24#define DRIVER_LICENSE "GPL"
25
26/* Parameters that can be passed to the driver. */
27static int debug;
28module_param(debug, int, 0444);
29MODULE_PARM_DESC(debug, "Enable extra debug messages and information");
30
31/* Vendor and product ids */
32#define USB_KEYSPAN_VENDOR_ID 0x06CD
33#define USB_KEYSPAN_PRODUCT_UIA11 0x0202
34
35/* Defines for converting the data from the remote. */
36#define ZERO 0x18
37#define ZERO_MASK 0x1F /* 5 bits for a 0 */
38#define ONE 0x3C
39#define ONE_MASK 0x3F /* 6 bits for a 1 */
40#define SYNC 0x3F80
41#define SYNC_MASK 0x3FFF /* 14 bits for a SYNC sequence */
42#define STOP 0x00
43#define STOP_MASK 0x1F /* 5 bits for the STOP sequence */
44#define GAP 0xFF
45
46#define RECV_SIZE 8 /* The UIA-11 type have a 8 byte limit. */
47
Michael Downey99f83c92005-06-27 11:48:26 -060048/*
49 * Table that maps the 31 possible keycodes to input keys.
50 * Currently there are 15 and 17 button models so RESERVED codes
51 * are blank areas in the mapping.
52 */
Dmitry Torokhov1953ea22007-11-04 00:41:24 -040053static const unsigned short keyspan_key_table[] = {
Michael Downey99f83c92005-06-27 11:48:26 -060054 KEY_RESERVED, /* 0 is just a place holder. */
55 KEY_RESERVED,
56 KEY_STOP,
57 KEY_PLAYCD,
58 KEY_RESERVED,
59 KEY_PREVIOUSSONG,
60 KEY_REWIND,
61 KEY_FORWARD,
62 KEY_NEXTSONG,
63 KEY_RESERVED,
64 KEY_RESERVED,
65 KEY_RESERVED,
66 KEY_PAUSE,
67 KEY_VOLUMEUP,
68 KEY_RESERVED,
69 KEY_RESERVED,
70 KEY_RESERVED,
71 KEY_VOLUMEDOWN,
72 KEY_RESERVED,
73 KEY_UP,
74 KEY_RESERVED,
75 KEY_MUTE,
76 KEY_LEFT,
77 KEY_ENTER,
78 KEY_RIGHT,
79 KEY_RESERVED,
80 KEY_RESERVED,
81 KEY_DOWN,
82 KEY_RESERVED,
83 KEY_KPASTERISK,
84 KEY_RESERVED,
85 KEY_MENU
86};
87
Dmitry Torokhov1953ea22007-11-04 00:41:24 -040088/* table of devices that work with this driver */
89static struct usb_device_id keyspan_table[] = {
90 { USB_DEVICE(USB_KEYSPAN_VENDOR_ID, USB_KEYSPAN_PRODUCT_UIA11) },
91 { } /* Terminating entry */
92};
93
94/* Structure to store all the real stuff that a remote sends to us. */
95struct keyspan_message {
96 u16 system;
97 u8 button;
98 u8 toggle;
99};
100
101/* Structure used for all the bit testing magic needed to be done. */
102struct bit_tester {
103 u32 tester;
104 int len;
105 int pos;
106 int bits_left;
107 u8 buffer[32];
108};
109
110/* Structure to hold all of our driver specific stuff */
111struct usb_keyspan {
112 char name[128];
113 char phys[64];
114 unsigned short keymap[ARRAY_SIZE(keyspan_key_table)];
115 struct usb_device *udev;
116 struct input_dev *input;
117 struct usb_interface *interface;
118 struct usb_endpoint_descriptor *in_endpoint;
119 struct urb* irq_urb;
120 int open;
121 dma_addr_t in_dma;
122 unsigned char *in_buffer;
123
124 /* variables used to parse messages from remote. */
125 struct bit_tester data;
126 int stage;
127 int toggle;
128};
129
Michael Downey99f83c92005-06-27 11:48:26 -0600130static struct usb_driver keyspan_driver;
131
132/*
133 * Debug routine that prints out what we've received from the remote.
134 */
135static void keyspan_print(struct usb_keyspan* dev) /*unsigned char* data)*/
136{
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500137 char codes[4 * RECV_SIZE];
Michael Downey99f83c92005-06-27 11:48:26 -0600138 int i;
139
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500140 for (i = 0; i < RECV_SIZE; i++)
141 snprintf(codes + i * 3, 4, "%02x ", dev->in_buffer[i]);
Michael Downey99f83c92005-06-27 11:48:26 -0600142
143 dev_info(&dev->udev->dev, "%s\n", codes);
144}
145
146/*
147 * Routine that manages the bit_tester structure. It makes sure that there are
148 * at least bits_needed bits loaded into the tester.
149 */
150static int keyspan_load_tester(struct usb_keyspan* dev, int bits_needed)
151{
152 if (dev->data.bits_left >= bits_needed)
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500153 return 0;
Michael Downey99f83c92005-06-27 11:48:26 -0600154
155 /*
156 * Somehow we've missed the last message. The message will be repeated
157 * though so it's not too big a deal
158 */
159 if (dev->data.pos >= dev->data.len) {
Greg Kroah-Hartman419b1a12012-05-04 15:32:58 -0700160 dev_dbg(&dev->interface->dev,
Greg Kroah-Hartman654f3112005-11-17 09:48:09 -0800161 "%s - Error ran out of data. pos: %d, len: %d\n",
Harvey Harrisonea3e6c52008-05-05 11:36:18 -0400162 __func__, dev->data.pos, dev->data.len);
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500163 return -1;
Michael Downey99f83c92005-06-27 11:48:26 -0600164 }
165
166 /* Load as much as we can into the tester. */
167 while ((dev->data.bits_left + 7 < (sizeof(dev->data.tester) * 8)) &&
168 (dev->data.pos < dev->data.len)) {
169 dev->data.tester += (dev->data.buffer[dev->data.pos++] << dev->data.bits_left);
170 dev->data.bits_left += 8;
171 }
172
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500173 return 0;
Michael Downey99f83c92005-06-27 11:48:26 -0600174}
175
Dmitry Torokhov1953ea22007-11-04 00:41:24 -0400176static void keyspan_report_button(struct usb_keyspan *remote, int button, int press)
177{
178 struct input_dev *input = remote->input;
179
180 input_event(input, EV_MSC, MSC_SCAN, button);
181 input_report_key(input, remote->keymap[button], press);
182 input_sync(input);
183}
184
Michael Downey99f83c92005-06-27 11:48:26 -0600185/*
186 * Routine that handles all the logic needed to parse out the message from the remote.
187 */
David Howells7d12e782006-10-05 14:55:46 +0100188static void keyspan_check_data(struct usb_keyspan *remote)
Michael Downey99f83c92005-06-27 11:48:26 -0600189{
190 int i;
191 int found = 0;
192 struct keyspan_message message;
193
194 switch(remote->stage) {
195 case 0:
196 /*
197 * In stage 0 we want to find the start of a message. The remote sends a 0xFF as filler.
198 * So the first byte that isn't a FF should be the start of a new message.
199 */
200 for (i = 0; i < RECV_SIZE && remote->in_buffer[i] == GAP; ++i);
201
202 if (i < RECV_SIZE) {
203 memcpy(remote->data.buffer, remote->in_buffer, RECV_SIZE);
204 remote->data.len = RECV_SIZE;
205 remote->data.pos = 0;
206 remote->data.tester = 0;
207 remote->data.bits_left = 0;
208 remote->stage = 1;
209 }
210 break;
211
212 case 1:
213 /*
214 * Stage 1 we should have 16 bytes and should be able to detect a
215 * SYNC. The SYNC is 14 bits, 7 0's and then 7 1's.
216 */
217 memcpy(remote->data.buffer + remote->data.len, remote->in_buffer, RECV_SIZE);
218 remote->data.len += RECV_SIZE;
219
220 found = 0;
221 while ((remote->data.bits_left >= 14 || remote->data.pos < remote->data.len) && !found) {
222 for (i = 0; i < 8; ++i) {
223 if (keyspan_load_tester(remote, 14) != 0) {
224 remote->stage = 0;
225 return;
226 }
227
228 if ((remote->data.tester & SYNC_MASK) == SYNC) {
229 remote->data.tester = remote->data.tester >> 14;
230 remote->data.bits_left -= 14;
231 found = 1;
232 break;
233 } else {
234 remote->data.tester = remote->data.tester >> 1;
235 --remote->data.bits_left;
236 }
237 }
238 }
239
240 if (!found) {
241 remote->stage = 0;
242 remote->data.len = 0;
243 } else {
244 remote->stage = 2;
245 }
246 break;
247
248 case 2:
249 /*
250 * Stage 2 we should have 24 bytes which will be enough for a full
251 * message. We need to parse out the system code, button code,
252 * toggle code, and stop.
253 */
254 memcpy(remote->data.buffer + remote->data.len, remote->in_buffer, RECV_SIZE);
255 remote->data.len += RECV_SIZE;
256
257 message.system = 0;
258 for (i = 0; i < 9; i++) {
259 keyspan_load_tester(remote, 6);
260
261 if ((remote->data.tester & ZERO_MASK) == ZERO) {
262 message.system = message.system << 1;
263 remote->data.tester = remote->data.tester >> 5;
264 remote->data.bits_left -= 5;
265 } else if ((remote->data.tester & ONE_MASK) == ONE) {
266 message.system = (message.system << 1) + 1;
267 remote->data.tester = remote->data.tester >> 6;
268 remote->data.bits_left -= 6;
269 } else {
Greg Kroah-Hartman419b1a12012-05-04 15:32:58 -0700270 dev_err(&remote->interface->dev,
Greg Kroah-Hartman4efeca52012-04-25 14:48:28 -0700271 "%s - Unknown sequence found in system data.\n",
272 __func__);
Michael Downey99f83c92005-06-27 11:48:26 -0600273 remote->stage = 0;
274 return;
275 }
276 }
277
278 message.button = 0;
279 for (i = 0; i < 5; i++) {
280 keyspan_load_tester(remote, 6);
281
282 if ((remote->data.tester & ZERO_MASK) == ZERO) {
283 message.button = message.button << 1;
284 remote->data.tester = remote->data.tester >> 5;
285 remote->data.bits_left -= 5;
286 } else if ((remote->data.tester & ONE_MASK) == ONE) {
287 message.button = (message.button << 1) + 1;
288 remote->data.tester = remote->data.tester >> 6;
289 remote->data.bits_left -= 6;
290 } else {
Greg Kroah-Hartman419b1a12012-05-04 15:32:58 -0700291 dev_err(&remote->interface->dev,
Greg Kroah-Hartman4efeca52012-04-25 14:48:28 -0700292 "%s - Unknown sequence found in button data.\n",
293 __func__);
Michael Downey99f83c92005-06-27 11:48:26 -0600294 remote->stage = 0;
295 return;
296 }
297 }
298
299 keyspan_load_tester(remote, 6);
300 if ((remote->data.tester & ZERO_MASK) == ZERO) {
301 message.toggle = 0;
302 remote->data.tester = remote->data.tester >> 5;
303 remote->data.bits_left -= 5;
304 } else if ((remote->data.tester & ONE_MASK) == ONE) {
305 message.toggle = 1;
306 remote->data.tester = remote->data.tester >> 6;
307 remote->data.bits_left -= 6;
308 } else {
Greg Kroah-Hartman419b1a12012-05-04 15:32:58 -0700309 dev_err(&remote->interface->dev,
Greg Kroah-Hartman4efeca52012-04-25 14:48:28 -0700310 "%s - Error in message, invalid toggle.\n",
311 __func__);
Michael Downey01e89502006-04-03 08:58:07 -0600312 remote->stage = 0;
313 return;
Michael Downey99f83c92005-06-27 11:48:26 -0600314 }
315
316 keyspan_load_tester(remote, 5);
317 if ((remote->data.tester & STOP_MASK) == STOP) {
318 remote->data.tester = remote->data.tester >> 5;
319 remote->data.bits_left -= 5;
320 } else {
Greg Kroah-Hartman419b1a12012-05-04 15:32:58 -0700321 dev_err(&remote->interface->dev,
Greg Kroah-Hartman4efeca52012-04-25 14:48:28 -0700322 "Bad message received, no stop bit found.\n");
Michael Downey99f83c92005-06-27 11:48:26 -0600323 }
324
Greg Kroah-Hartman419b1a12012-05-04 15:32:58 -0700325 dev_dbg(&remote->interface->dev,
Michael Downey99f83c92005-06-27 11:48:26 -0600326 "%s found valid message: system: %d, button: %d, toggle: %d\n",
Harvey Harrisonea3e6c52008-05-05 11:36:18 -0400327 __func__, message.system, message.button, message.toggle);
Michael Downey99f83c92005-06-27 11:48:26 -0600328
329 if (message.toggle != remote->toggle) {
Dmitry Torokhov1953ea22007-11-04 00:41:24 -0400330 keyspan_report_button(remote, message.button, 1);
331 keyspan_report_button(remote, message.button, 0);
Michael Downey99f83c92005-06-27 11:48:26 -0600332 remote->toggle = message.toggle;
333 }
334
335 remote->stage = 0;
336 break;
337 }
338}
339
340/*
341 * Routine for sending all the initialization messages to the remote.
342 */
343static int keyspan_setup(struct usb_device* dev)
344{
345 int retval = 0;
346
347 retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
348 0x11, 0x40, 0x5601, 0x0, NULL, 0, 0);
349 if (retval) {
350 dev_dbg(&dev->dev, "%s - failed to set bit rate due to error: %d\n",
Harvey Harrisonea3e6c52008-05-05 11:36:18 -0400351 __func__, retval);
Michael Downey99f83c92005-06-27 11:48:26 -0600352 return(retval);
353 }
354
355 retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
356 0x44, 0x40, 0x0, 0x0, NULL, 0, 0);
357 if (retval) {
358 dev_dbg(&dev->dev, "%s - failed to set resume sensitivity due to error: %d\n",
Harvey Harrisonea3e6c52008-05-05 11:36:18 -0400359 __func__, retval);
Michael Downey99f83c92005-06-27 11:48:26 -0600360 return(retval);
361 }
362
363 retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
364 0x22, 0x40, 0x0, 0x0, NULL, 0, 0);
365 if (retval) {
366 dev_dbg(&dev->dev, "%s - failed to turn receive on due to error: %d\n",
Harvey Harrisonea3e6c52008-05-05 11:36:18 -0400367 __func__, retval);
Michael Downey99f83c92005-06-27 11:48:26 -0600368 return(retval);
369 }
370
Harvey Harrisonea3e6c52008-05-05 11:36:18 -0400371 dev_dbg(&dev->dev, "%s - Setup complete.\n", __func__);
Michael Downey99f83c92005-06-27 11:48:26 -0600372 return(retval);
373}
374
375/*
376 * Routine used to handle a new message that has come in.
377 */
David Howells7d12e782006-10-05 14:55:46 +0100378static void keyspan_irq_recv(struct urb *urb)
Michael Downey99f83c92005-06-27 11:48:26 -0600379{
380 struct usb_keyspan *dev = urb->context;
381 int retval;
382
383 /* Check our status in case we need to bail out early. */
384 switch (urb->status) {
385 case 0:
386 break;
387
388 /* Device went away so don't keep trying to read from it. */
389 case -ECONNRESET:
390 case -ENOENT:
391 case -ESHUTDOWN:
392 return;
393
394 default:
395 goto resubmit;
396 break;
397 }
398
399 if (debug)
400 keyspan_print(dev);
401
David Howells7d12e782006-10-05 14:55:46 +0100402 keyspan_check_data(dev);
Michael Downey99f83c92005-06-27 11:48:26 -0600403
404resubmit:
405 retval = usb_submit_urb(urb, GFP_ATOMIC);
406 if (retval)
Greg Kroah-Hartman419b1a12012-05-04 15:32:58 -0700407 dev_err(&dev->interface->dev,
Greg Kroah-Hartman4efeca52012-04-25 14:48:28 -0700408 "%s - usb_submit_urb failed with result: %d\n",
409 __func__, retval);
Michael Downey99f83c92005-06-27 11:48:26 -0600410}
411
412static int keyspan_open(struct input_dev *dev)
413{
Dmitry Torokhov7791bda2007-04-12 01:34:39 -0400414 struct usb_keyspan *remote = input_get_drvdata(dev);
Michael Downey99f83c92005-06-27 11:48:26 -0600415
Michael Downey99f83c92005-06-27 11:48:26 -0600416 remote->irq_urb->dev = remote->udev;
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500417 if (usb_submit_urb(remote->irq_urb, GFP_KERNEL))
Michael Downey99f83c92005-06-27 11:48:26 -0600418 return -EIO;
Michael Downey99f83c92005-06-27 11:48:26 -0600419
420 return 0;
421}
422
423static void keyspan_close(struct input_dev *dev)
424{
Dmitry Torokhov7791bda2007-04-12 01:34:39 -0400425 struct usb_keyspan *remote = input_get_drvdata(dev);
Michael Downey99f83c92005-06-27 11:48:26 -0600426
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500427 usb_kill_urb(remote->irq_urb);
428}
429
430static struct usb_endpoint_descriptor *keyspan_get_in_endpoint(struct usb_host_interface *iface)
431{
432
433 struct usb_endpoint_descriptor *endpoint;
434 int i;
435
436 for (i = 0; i < iface->desc.bNumEndpoints; ++i) {
437 endpoint = &iface->endpoint[i].desc;
438
Luiz Fernando N. Capitulino96723192006-09-27 11:58:53 -0700439 if (usb_endpoint_is_int_in(endpoint)) {
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500440 /* we found our interrupt in endpoint */
441 return endpoint;
442 }
443 }
444
445 return NULL;
Michael Downey99f83c92005-06-27 11:48:26 -0600446}
447
448/*
449 * Routine that sets up the driver to handle a specific USB device detected on the bus.
450 */
451static int keyspan_probe(struct usb_interface *interface, const struct usb_device_id *id)
452{
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500453 struct usb_device *udev = interface_to_usbdev(interface);
Michael Downey99f83c92005-06-27 11:48:26 -0600454 struct usb_endpoint_descriptor *endpoint;
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500455 struct usb_keyspan *remote;
456 struct input_dev *input_dev;
Dmitry Torokhov50141862007-04-12 01:33:39 -0400457 int i, error;
Michael Downey99f83c92005-06-27 11:48:26 -0600458
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500459 endpoint = keyspan_get_in_endpoint(interface->cur_altsetting);
460 if (!endpoint)
461 return -ENODEV;
462
463 remote = kzalloc(sizeof(*remote), GFP_KERNEL);
464 input_dev = input_allocate_device();
465 if (!remote || !input_dev) {
Dmitry Torokhov50141862007-04-12 01:33:39 -0400466 error = -ENOMEM;
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500467 goto fail1;
Michael Downey99f83c92005-06-27 11:48:26 -0600468 }
Michael Downey99f83c92005-06-27 11:48:26 -0600469
470 remote->udev = udev;
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500471 remote->input = input_dev;
Michael Downey99f83c92005-06-27 11:48:26 -0600472 remote->interface = interface;
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500473 remote->in_endpoint = endpoint;
Michael Downey99f83c92005-06-27 11:48:26 -0600474 remote->toggle = -1; /* Set to -1 so we will always not match the toggle from the first remote message. */
475
Daniel Mack997ea582010-04-12 13:17:25 +0200476 remote->in_buffer = usb_alloc_coherent(udev, RECV_SIZE, GFP_ATOMIC, &remote->in_dma);
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500477 if (!remote->in_buffer) {
Dmitry Torokhov50141862007-04-12 01:33:39 -0400478 error = -ENOMEM;
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500479 goto fail1;
Michael Downey99f83c92005-06-27 11:48:26 -0600480 }
481
482 remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL);
483 if (!remote->irq_urb) {
Dmitry Torokhov50141862007-04-12 01:33:39 -0400484 error = -ENOMEM;
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500485 goto fail2;
Michael Downey99f83c92005-06-27 11:48:26 -0600486 }
487
Dmitry Torokhov50141862007-04-12 01:33:39 -0400488 error = keyspan_setup(udev);
489 if (error) {
490 error = -ENODEV;
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500491 goto fail3;
Michael Downey99f83c92005-06-27 11:48:26 -0600492 }
493
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500494 if (udev->manufacturer)
495 strlcpy(remote->name, udev->manufacturer, sizeof(remote->name));
496
497 if (udev->product) {
498 if (udev->manufacturer)
499 strlcat(remote->name, " ", sizeof(remote->name));
500 strlcat(remote->name, udev->product, sizeof(remote->name));
Michael Downey99f83c92005-06-27 11:48:26 -0600501 }
502
Michael Downey99f83c92005-06-27 11:48:26 -0600503 if (!strlen(remote->name))
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500504 snprintf(remote->name, sizeof(remote->name),
505 "USB Keyspan Remote %04x:%04x",
506 le16_to_cpu(udev->descriptor.idVendor),
507 le16_to_cpu(udev->descriptor.idProduct));
Michael Downey99f83c92005-06-27 11:48:26 -0600508
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500509 usb_make_path(udev, remote->phys, sizeof(remote->phys));
510 strlcat(remote->phys, "/input0", sizeof(remote->phys));
Dmitry Torokhov1953ea22007-11-04 00:41:24 -0400511 memcpy(remote->keymap, keyspan_key_table, sizeof(remote->keymap));
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500512
513 input_dev->name = remote->name;
514 input_dev->phys = remote->phys;
515 usb_to_input_id(udev, &input_dev->id);
Dmitry Torokhovc0f82d52007-04-12 01:35:03 -0400516 input_dev->dev.parent = &interface->dev;
Dmitry Torokhov1953ea22007-11-04 00:41:24 -0400517 input_dev->keycode = remote->keymap;
518 input_dev->keycodesize = sizeof(unsigned short);
519 input_dev->keycodemax = ARRAY_SIZE(remote->keymap);
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500520
Dmitry Torokhov1953ea22007-11-04 00:41:24 -0400521 input_set_capability(input_dev, EV_MSC, MSC_SCAN);
522 __set_bit(EV_KEY, input_dev->evbit);
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500523 for (i = 0; i < ARRAY_SIZE(keyspan_key_table); i++)
Dmitry Torokhov1953ea22007-11-04 00:41:24 -0400524 __set_bit(keyspan_key_table[i], input_dev->keybit);
525 __clear_bit(KEY_RESERVED, input_dev->keybit);
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500526
Dmitry Torokhov7791bda2007-04-12 01:34:39 -0400527 input_set_drvdata(input_dev, remote);
528
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500529 input_dev->open = keyspan_open;
530 input_dev->close = keyspan_close;
Michael Downey99f83c92005-06-27 11:48:26 -0600531
532 /*
Dmitry Torokhov1953ea22007-11-04 00:41:24 -0400533 * Initialize the URB to access the device.
534 * The urb gets sent to the device in keyspan_open()
Michael Downey99f83c92005-06-27 11:48:26 -0600535 */
536 usb_fill_int_urb(remote->irq_urb,
Dmitry Torokhov1953ea22007-11-04 00:41:24 -0400537 remote->udev,
538 usb_rcvintpipe(remote->udev, endpoint->bEndpointAddress),
Michael Downey99f83c92005-06-27 11:48:26 -0600539 remote->in_buffer, RECV_SIZE, keyspan_irq_recv, remote,
Dmitry Torokhov1953ea22007-11-04 00:41:24 -0400540 endpoint->bInterval);
Michael Downey99f83c92005-06-27 11:48:26 -0600541 remote->irq_urb->transfer_dma = remote->in_dma;
542 remote->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
543
544 /* we can register the device now, as it is ready */
Dmitry Torokhov50141862007-04-12 01:33:39 -0400545 error = input_register_device(remote->input);
546 if (error)
547 goto fail3;
Michael Downey99f83c92005-06-27 11:48:26 -0600548
549 /* save our data pointer in this interface device */
550 usb_set_intfdata(interface, remote);
551
Michael Downey99f83c92005-06-27 11:48:26 -0600552 return 0;
553
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500554 fail3: usb_free_urb(remote->irq_urb);
Daniel Mack997ea582010-04-12 13:17:25 +0200555 fail2: usb_free_coherent(udev, RECV_SIZE, remote->in_buffer, remote->in_dma);
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500556 fail1: kfree(remote);
557 input_free_device(input_dev);
Michael Downey99f83c92005-06-27 11:48:26 -0600558
Dmitry Torokhov50141862007-04-12 01:33:39 -0400559 return error;
Michael Downey99f83c92005-06-27 11:48:26 -0600560}
561
562/*
563 * Routine called when a device is disconnected from the USB.
564 */
565static void keyspan_disconnect(struct usb_interface *interface)
566{
567 struct usb_keyspan *remote;
568
Michael Downey99f83c92005-06-27 11:48:26 -0600569 remote = usb_get_intfdata(interface);
570 usb_set_intfdata(interface, NULL);
571
572 if (remote) { /* We have a valid driver structure so clean up everything we allocated. */
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500573 input_unregister_device(remote->input);
Michael Downey99f83c92005-06-27 11:48:26 -0600574 usb_kill_urb(remote->irq_urb);
575 usb_free_urb(remote->irq_urb);
Daniel Mack997ea582010-04-12 13:17:25 +0200576 usb_free_coherent(remote->udev, RECV_SIZE, remote->in_buffer, remote->in_dma);
Michael Downey99f83c92005-06-27 11:48:26 -0600577 kfree(remote);
578 }
Michael Downey99f83c92005-06-27 11:48:26 -0600579}
580
581/*
582 * Standard driver set up sections
583 */
584static struct usb_driver keyspan_driver =
585{
Michael Downey99f83c92005-06-27 11:48:26 -0600586 .name = "keyspan_remote",
587 .probe = keyspan_probe,
588 .disconnect = keyspan_disconnect,
589 .id_table = keyspan_table
590};
591
Greg Kroah-Hartman08642e72011-11-18 09:48:31 -0800592module_usb_driver(keyspan_driver);
Michael Downey99f83c92005-06-27 11:48:26 -0600593
594MODULE_DEVICE_TABLE(usb, keyspan_table);
595MODULE_AUTHOR(DRIVER_AUTHOR);
596MODULE_DESCRIPTION(DRIVER_DESC);
597MODULE_LICENSE(DRIVER_LICENSE);